mirror of
https://github.com/torvalds/linux.git
synced 2026-07-28 18:21:24 +02:00
f13ee7cc2d
1386561 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
f13ee7cc2d |
Thermal control updates for 6.18-rc1
- Add new thermal driver for the Renesas RZ/G3S SoC (Claudiu Beznea)
- Add new thermal driver for the Renesas RZ/G3E SoC (John Madieu)
- Add support for new platform power slider feature to the Intel
int340x driver (Srinivas Pandruvada).
- Add new Tegra114-specific SOCTHERM driver and document Tegra114
SOCTHERM Thermal Management System in DT bindings (Svyatoslav Ryhel)
- Add temperature sensor channel to thermal-generic-adc (Svyatoslav
Ryhel)
- Add support for per-SoC default trim values to the Renesas rcar_gen3
thermal driver, use it for adding R-Car V4H default trim values, fix
a comment typo in that driver and document Gen4 support in its
Kconfig entry (Marek Vasut)
- Fix mapping SoCs to generic Gen4 entry in the Renesas rcar_gen3
thermal driver (Wolfram Sang)
- Document the TSU unit in the r9a08g045-tsu and r9a09g047-tsu DT
bindings (Claudiu Beznea, John Madieu)
- Make LMH select QCOM_SCM and add missing IRQ includes to the
qcom/lmh thermal driver (Dmitry Baryshkov)
- Fix incorrect error message in the qcom/lmh thermal driver (Sumeet
Pawnikar)
- Add QCS615 compatible to tsens thermal DT bindings (Gaurav Kohli)
- Document the Glymur temperature sensor in qcom-tsens thermal DT
bindings (Manaf Meethalavalappu Pallikunhi)
- Make k3_j72xx_bandgap thermal driver register the thermal sensor
with hwmon (Michael Walle)
- Tighten GRF requirements in the rockchip thermal DT bindings,
silence a GRF warning in the rockchip thermal driver and unify
struct rockchip_tsadc_chip format in it (Sebastian Reichel)
- Update the Step-wise thermal governor to allow it to reduce the
cooling level earlier if thermal zone temperature is dropping
and clean it up (Rafael Wysocki)
- Clean up the thermal testing code (Rafael Wysocki)
- Assorted cleanups of thermal drivers (Jiapeng Chong, Salah Triki,
Osama Abdelkader)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjamT4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1BOwH/3ZL/GN+iJ7oFU/jOW4EktnLowCMgIKF
DURhmrZRoqJzZUY8PXysUekXYmniT6Itzv2h4psKMihn/khtapmkRkE23exmR9Gy
h5V4Nxbx4Ero6YfZ3KT4+AY1x2eRO6aDY29EdIAVeWacwOleTPhUvP70d5dZTHdy
QYi21qZarrkG3uiiNrBfgRW2IAcvQ37G1dy6fxJrURhUG3E9u2P9C9REBwQfkxBj
LxaV42oiQNU0S5+r4/0f1UbqR88FTh/X4xmpEFHK+zWewKYdYhXHBdCYlcegH7oO
WwQW8u3ofR/COpFNPdWrpDb9fYia0fbcJ131CVmAy8RySVd4dBAPKDM=
=okDy
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are mostly thermal driver updates, including new thermal drivers
for Renesas RZ/G3S and Renesas RZ/G3E SoCs, a new power slider
platform feature support in the Intel int340x thermal driver, a new
Tegra114- specific SOCTHERM driver and more.
There is also a Step-wise thermal governor update allowing it to start
reducing cooling somewhat earlier if the temperature of the given
thermal zone is falling down and a thermal testing code cleanup.
Specifics:
- Add new thermal driver for the Renesas RZ/G3S SoC (Claudiu Beznea)
- Add new thermal driver for the Renesas RZ/G3E SoC (John Madieu)
- Add support for new platform power slider feature to the Intel
int340x driver (Srinivas Pandruvada).
- Add new Tegra114-specific SOCTHERM driver and document Tegra114
SOCTHERM Thermal Management System in DT bindings (Svyatoslav
Ryhel)
- Add temperature sensor channel to thermal-generic-adc (Svyatoslav
Ryhel)
- Add support for per-SoC default trim values to the Renesas
rcar_gen3 thermal driver, use it for adding R-Car V4H default trim
values, fix a comment typo in that driver and document Gen4 support
in its Kconfig entry (Marek Vasut)
- Fix mapping SoCs to generic Gen4 entry in the Renesas rcar_gen3
thermal driver (Wolfram Sang)
- Document the TSU unit in the r9a08g045-tsu and r9a09g047-tsu DT
bindings (Claudiu Beznea, John Madieu)
- Make LMH select QCOM_SCM and add missing IRQ includes to the
qcom/lmh thermal driver (Dmitry Baryshkov)
- Fix incorrect error message in the qcom/lmh thermal driver (Sumeet
Pawnikar)
- Add QCS615 compatible to tsens thermal DT bindings (Gaurav Kohli)
- Document the Glymur temperature sensor in qcom-tsens thermal DT
bindings (Manaf Meethalavalappu Pallikunhi)
- Make k3_j72xx_bandgap thermal driver register the thermal sensor
with hwmon (Michael Walle)
- Tighten GRF requirements in the rockchip thermal DT bindings,
silence a GRF warning in the rockchip thermal driver and unify
struct rockchip_tsadc_chip format in it (Sebastian Reichel)
- Update the Step-wise thermal governor to allow it to reduce the
cooling level earlier if thermal zone temperature is dropping and
clean it up (Rafael Wysocki)
- Clean up the thermal testing code (Rafael Wysocki)
- Assorted cleanups of thermal drivers (Jiapeng Chong, Salah Triki,
Osama Abdelkader)"
* tag 'thermal-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (37 commits)
thermal/drivers/renesas/rzg3e: Fix add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: qcom-tsens: Document the Glymur temperature Sensor
thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal/drivers/thermal-generic-adc: Add temperature sensor channel
dt-bindings: thermal: rockchip: Tighten grf requirements
thermal/drivers/rockchip: Shut up GRF warning
thermal/drivers/rockchip: Unify struct rockchip_tsadc_chip format
thermal/drivers/renesas/rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
thermal/drivers/k3_j72xx_bandgap: Register sensors with hwmon
thermal/drivers/rcar_gen3: Fix mapping SoCs to generic Gen4 entry
thermal/drivers/tegra: Add Tegra114 specific SOCTHERM driver
dt-bindings: thermal: add Tegra114 soctherm header
thermal/drivers/tegra/soctherm-fuse: Prepare calibration for Tegra114 support
dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System
thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
thermal/drivers/rcar_gen3: Fix comment typo
drivers/thermal/qcom/lmh: Fix incorrect error message
thermal/drivers/qcom/lmh: Add missing IRQ includes
...
|
||
|
Linus Torvalds
|
679a16399a |
ACPI updates for 6.18-rc1
- Add SoundWire File Table (SWFT) signature to ACPICA (Maciej Strozek)
- Rearrange local variable definition involving #ifdef in ACPICA to
avoid using uninitialized variables (Zhe Qiao)
- Allow ACPICA to skip Global Lock initialization (Huacai Chen)
- Apply ACPI_NONSTRING in more places in ACPICA and fix two regressions
related to incorrect ACPI_NONSTRING usage (Ahmed Salem)
- Fix printing CDAT table header when dissasebling CDAT AML (Ahmed
Salem)
- Use acpi_ds_clear_operands() in acpi_ds_call_control_method() in
ACPICA (Hans de Goede)
- Update dsmethod.c in ACPICA to address unused variable warning (Saket
Dumbre)
- Print error messages in ACPICA for too few or too many control method
arguments (Saket Dumbre)
- Update ACPICA version to 20250807 (Saket Dumbre)
- Fix largest possible resource descriptor index in ACPICA (Dmitry
Antipov)
- Add Back-Invalidate restriction to CXL Window for CEDT in ACPICA
(Davidlohr Bueso).
- Add the package type to acceptable Arg3 types for _DSM in ACPICA
because ACPI_TYPE_ANY does not cover it (Saket Dumbre)
- Fix return values in ap_is_valid_checksum() in the acpidump utility
in ACPICA (Kaushlendra Kumar)
- Add Intel CVS ACPI HIDs to acpi_ignore_dep_ids[] so it is not
regarded as real dependency (Hans de Goede)
- Use ACPI_FREE() for freeing an ACPI object in description_show() in
the ACPI sysfs-related code (Kaushlendra Kumar)
- Fix memory leak in the ACPI processor idle driver registration error
code path and optimize ACPI idle driver registration (Huisong Li,
Rafael Wysocki)
- Add module import namespace to the ACPI processor idle driver (Rafael
Wysocki)
- Eliminate static variable flat_state_cnt from the ACPI processor idle
driver (Rafael Wysocki)
- Release cpufreq policy references using __free() in the ACPI
processor thremal driver (Zihuan Zhang)
- Remove unused empty stubs of some functions and rearrange function
declarations in a header file in the ACPI processor driver (Huisong
Li)
- Redefine two functions as void in the ACPI processor driver (Rafael
Wysocki)
- Stop exposing global variable acpi_idle_driver in the ACPI processor
driver (Huisong Li)
- Fix ACPI buffer properties extraction for data-only subnodes
represented as _DSD-equivalent packages (Rafael Wysocki)
- Fix handling of ACPI data-only subnodes represented as _DSD-equivalent
packages in the case when they are embedded in larger _DSD-equivalent
packages and clean up acpi_nondev_subnode_extract() (Rafael Wysocki)
- Skip ACPI IRQ override on ASUS Vivobook Pro N6506CU (Sam van Kampen)
- Add power resource init function and use it for introducing an HP
EliteBook 855 G7 WWAN modem power resource quirk (Maciej Szmigiero)
- Add support for DBG2 RISC-V SBI port subtype and Precise Baud Rate
field to the ACPI SPCR table parser (Chen Pei)
- Eliminate a dummy local variable from the ACPI thermal driver (Rafael
Wysocki)
- Fold two simple functions into their only caller in the ACPI fan
driver (Rafael Wysocki)
- Force native backlight on Lenovo 82K8 in the ACPI backlight (video)
driver (Mario Limonciello)
- Add missing sysfs_remove_group() for ACPI_TAD_RT (Daniel Tang)
- Skip PRM handlers with NULL handler_address or NULL VA in the ACPI
PRM driver (Shang song)
- Remove redundant assignments in erst_dbg_{ioctl|write}() in the ACPI
APEI driver (Thorsten Blum)
- Allow the ACPI APEI EINJ to handle more types of addresses than just
MMIO (Jiaqi Yan)
- Use str_low_high() helper in two places in the ACPI code (Chelsy
Ratnawat)
- Use str_plural() to simplify the PNP code (Xichao Zhao)
- Fix signedness issues in read/write helpers in the ACPI AML debugger
interface (Amir Mohammad)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjaj3ESHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1mKgH/A5eTwqfiQFvkhgQU/mP9v8Y0yV8p0qE
W6xtzixsplk2bpV6IPcG8KA13EZMDGwkU+5xq2Jpsi/tipV58eyWv/i7TNaWNasM
QaX7mVik/QOw2hb6Jdef2RdgJOwj1J6UimR+i58HNX0hlBTPsMyqY0yHf6gXDzNM
CzS/A9kJUSvpCHav2tPoCr19ZLm+2GbgLoomGlqaM/Mxb6VyD7WnDeUYY2hOeZ4q
pFabFcEMjB7SOHv5sDLCKzy/r9+AspM9GVRgLKiJkMv/DQ4YWJd4ZRarFQWD48ff
sMX/DEg4M+YsaGCyHKLujloDpMnmg3MQYdvtmaf/Anf4VM/fkZPDkCY=
=YK1m
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include an ACPICA update (upstream revision 20250807 with a few
fixes on top), fixes and cleanups of the ACPI processor driver, fixes
and cleanups of the ACPI properties management code, one more ACPI IRQ
resource management quirk, one more ACPI backlight quirk, an ACPI
device enumeration quirk related to _DEP, a power resource quirk
related to WWAN modem for HP EliteBook 855 G7, ACPI SPCR table parser
extensions, an ACPI APEI EINJ driver update allowing it to handle more
address types, and several assorted cleanups of ACPI drivers and PNP
code.
Specifics:
- Add SoundWire File Table (SWFT) signature to ACPICA (Maciej
Strozek)
- Rearrange local variable definition involving #ifdef in ACPICA to
avoid using uninitialized variables (Zhe Qiao)
- Allow ACPICA to skip Global Lock initialization (Huacai Chen)
- Apply ACPI_NONSTRING in more places in ACPICA and fix two
regressions related to incorrect ACPI_NONSTRING usage (Ahmed Salem)
- Fix printing CDAT table header when dissasebling CDAT AML (Ahmed
Salem)
- Use acpi_ds_clear_operands() in acpi_ds_call_control_method() in
ACPICA (Hans de Goede)
- Update dsmethod.c in ACPICA to address unused variable warning
(Saket Dumbre)
- Print error messages in ACPICA for too few or too many control
method arguments (Saket Dumbre)
- Update ACPICA version to 20250807 (Saket Dumbre)
- Fix largest possible resource descriptor index in ACPICA (Dmitry
Antipov)
- Add Back-Invalidate restriction to CXL Window for CEDT in ACPICA
(Davidlohr Bueso)
- Add the package type to acceptable Arg3 types for _DSM in ACPICA
because ACPI_TYPE_ANY does not cover it (Saket Dumbre)
- Fix return values in ap_is_valid_checksum() in the acpidump utility
in ACPICA (Kaushlendra Kumar)
- Add Intel CVS ACPI HIDs to acpi_ignore_dep_ids[] so it is not
regarded as real dependency (Hans de Goede)
- Use ACPI_FREE() for freeing an ACPI object in description_show() in
the ACPI sysfs-related code (Kaushlendra Kumar)
- Fix memory leak in the ACPI processor idle driver registration
error code path and optimize ACPI idle driver registration (Huisong
Li, Rafael Wysocki)
- Add module import namespace to the ACPI processor idle driver
(Rafael Wysocki)
- Eliminate static variable flat_state_cnt from the ACPI processor
idle driver (Rafael Wysocki)
- Release cpufreq policy references using __free() in the ACPI
processor thremal driver (Zihuan Zhang)
- Remove unused empty stubs of some functions and rearrange function
declarations in a header file in the ACPI processor driver (Huisong
Li)
- Redefine two functions as void in the ACPI processor driver (Rafael
Wysocki)
- Stop exposing global variable acpi_idle_driver in the ACPI
processor driver (Huisong Li)
- Fix ACPI buffer properties extraction for data-only subnodes
represented as _DSD-equivalent packages (Rafael Wysocki)
- Fix handling of ACPI data-only subnodes represented as
_DSD-equivalent packages in the case when they are embedded in
larger _DSD-equivalent packages and clean up
acpi_nondev_subnode_extract() (Rafael Wysocki)
- Skip ACPI IRQ override on ASUS Vivobook Pro N6506CU (Sam van
Kampen)
- Add power resource init function and use it for introducing an HP
EliteBook 855 G7 WWAN modem power resource quirk (Maciej Szmigiero)
- Add support for DBG2 RISC-V SBI port subtype and Precise Baud Rate
field to the ACPI SPCR table parser (Chen Pei)
- Eliminate a dummy local variable from the ACPI thermal driver
(Rafael Wysocki)
- Fold two simple functions into their only caller in the ACPI fan
driver (Rafael Wysocki)
- Force native backlight on Lenovo 82K8 in the ACPI backlight (video)
driver (Mario Limonciello)
- Add missing sysfs_remove_group() for ACPI_TAD_RT (Daniel Tang)
- Skip PRM handlers with NULL handler_address or NULL VA in the ACPI
PRM driver (Shang song)
- Remove redundant assignments in erst_dbg_{ioctl|write}() in the
ACPI APEI driver (Thorsten Blum)
- Allow the ACPI APEI EINJ to handle more types of addresses than
just MMIO (Jiaqi Yan)
- Use str_low_high() helper in two places in the ACPI code (Chelsy
Ratnawat)
- Use str_plural() to simplify the PNP code (Xichao Zhao)
- Fix signedness issues in read/write helpers in the ACPI AML
debugger interface (Amir Mohammad)"
* tag 'acpi-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (50 commits)
ACPI: debug: fix signedness issues in read/write helpers
ACPI: processor: Do not expose global variable acpi_idle_driver
ACPI: SPCR: Support Precise Baud Rate field
ACPI: processor: idle: Redefine two functions as void
ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
ACPI: processor: idle: Rearrange declarations in header file
ACPI: processor: Remove unused empty stubs of some functions
ACPI: property: Adjust failure handling in acpi_nondev_subnode_extract()
ACPI: property: Do not pass NULL handles to acpi_attach_data()
ACPI: property: Add code comments explaining what is going on
ACPI: property: Disregard references in data-only subnode lists
ACPI: property: Fix buffer properties extraction for subnodes
ACPI: SPCR: Add support for DBG2 RISC-V SBI port subtype
ACPI: APEI: EINJ: Allow more types of addresses except MMIO
ACPI: APEI: Remove redundant assignments in erst_dbg_{ioctl|write}()
ACPICA: acpidump: fix return values in ap_is_valid_checksum()
ACPICA: ACPI_TYPE_ANY does not include the package type
ACPICA: CEDT: Add Back-Invalidate restriction to CXL Window
ACPICA: Fix largest possible resource descriptor index
ACPICA: Update version to 20250807
...
|
||
|
Linus Torvalds
|
991053178e |
Power management updates for 6.18-rc1
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange
freq QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver
to simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq core
to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md Sadre
Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix supported
hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not sufficient
to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi devfreq
driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance in
the mtk-cci devfreq driver probe and remove a redundant condition from
an if () statement in that driver (Dan Carpenter, Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf() in
cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle driver
and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that funtion
easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API (Brian
Norris)
- Clear power.must_resume in noirq suspend error path to avoid resuming
a dependant device under a suspended parent or supplier (Rafael
Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode and
combine exit paths in power_down() to avoid code duplication (Rafael
Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that do
bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjafbMSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO174EH/jAm4GBn1sbjMt0CybSHTTP9iryTiN6m
cXML5OpMoLbTnngfXjbEe9t52Fc0YV4awCG/S8Ufbut6ubWOEaVzInlw3zQAeE7c
V91ioxKrodrykpBxn5UFyCxpT2NZWteWl5rOEPeN7j+hqS4I4GTO0HsSo+E+1Y9F
DKELrbkLsn7rHy+ZvrOhcvq1IZE8gvINuji0QEf1cZz1VrgrLbQHUFqySpCUJw3F
/MfnA3l0kA2TXQ+UpDWJw8l1weZpXpOPJiyhYQKKeYHVA4osBwiFA/9pq+8Xb/AJ
GORHIl9y3x+JDXkEYyqmLn0k4FbHCX+4p5tpV9YDHebtP8dTLJBDF5Q=
=d4BP
-----END PGP SIGNATURE-----
Merge tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of these are cpufreq changes, which has been a recurring
pattern for a few recent cycles.
Those changes include new hardware support (AN7583 SoC support in the
airoha cpufreq driver, ipq5424 support in the qcom-nvmem cpufreq
driver, MT8196 support in the mediatek cpufreq driver, AM62D2 support
in the ti cpufreq driver), DT bindings and Rust code updates, cleanups
of the core and governors, and multiple driver fixes and cleanups.
Beyond that, there are hibernation fixes (some remaining 6.16 cycle
fallout and an issue related to hybrid suspend in the amdgpu driver),
cleanups of the PM core code, runtime PM documentation update, cpuidle
and power capping cleanups, and tooling updates.
Specifics:
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange freq
QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver to
simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas
Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq
core to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md
Sadre Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix
supported hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya
Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not
sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi
devfreq driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance
in the mtk-cci devfreq driver probe and remove a redundant
condition from an if () statement in that driver (Dan Carpenter,
Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf()
in cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle
driver and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that
funtion easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API
(Brian Norris)
- Clear power.must_resume in noirq suspend error path to avoid
resuming a dependant device under a suspended parent or supplier
(Rafael Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode
and combine exit paths in power_down() to avoid code duplication
(Rafael Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that
do bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)"
* tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
PM: runtime: Documentation: ABI: Document time units for *_time
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/power/x86/amd_pstate_tracer: Fix python gnuplot package names
cpufreq: Replace pointer subtraction with iteration macro
cpuidle: Fail cpuidle device registration if there is one already
...
|
||
|
Linus Torvalds
|
080ffb4bec |
I3C for 6.18
New driver: - Analog Devices I3C Controller Subsystem: - fix big-endian FIFO transfers - fix default I2C adapter timeout value Drivers: - dw: shutdown support - mipi-i3c-hci: Intel Wildcat Lake-U support, IOMMU support - renesas: RZ/V2H(P) and RZ/V2N support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmjdnOAACgkQY6TcMGxw OjJQTw//dec41U3YLDmZ5N31HuC5jerJYt4svKLuX05UUAR3lNq02kj7VzVYxw7l 9g6raFCqkxtYvfbZJ2kp9ulafwftjRRFLvz5MRdZ61c01gS8/0sqMAcTXzPaYvfO Vj0YeVXFk+8Z4dFidjkNnktwz/5jH9y0LQec+1e/Fk5gwwtC+TzaP+VUAGPdgMG1 7LMLlW5caxHymNT/U+z9gaVl8UmT/n/dsEW4BdLvpj9hRW4kxq/QRj9Y4fqyeEcN ULhdBKNHU+vC+lY/ylkOf/JtASSmRngX1swpajj6YlUKbvdKrZvw36MAZZ36ahLp qMsUi0E0BRLzFXv8kpNwhQ9Zfbu+KXMcxqqzrm/wyslo55E/x58HUxSIIJjocJRL WqBpg/3DljP3knyiizhGLXX/Lv3XhtpYW3u9KHKvhaNk6RmrPGmElCum8K0w1Ekl rZemVC1eHWxRkKIj0Zjgm5wBaTfD1+71UaHRPnFA2eO8R62JydyjEKn+ECnpG9HE cH61PbMsJPJQeO8Ty10hu0qaAy1s8zoMoKssokppyLrXhmrg6XUyeQ4LEmpHKBo4 hyCc83Af0bT+QO/+I7EVBLyJfA2HwCfEMCgJBG5hyARmGbMFzpkydounIOq9I2+w 5cxeyZm3SYBL+GWJhkZ78ikabdIjowM1lFpERVOrkyZ62GHJV9E= =uCC1 -----END PGP SIGNATURE----- Merge tag 'i3c/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "New driver: - Analog Devices I3C Controller Subsystem: - fix big-endian FIFO transfers - fix default I2C adapter timeout value Drivers: - dw: shutdown support - mipi-i3c-hci: Intel Wildcat Lake-U support, IOMMU support - renesas: RZ/V2H(P) and RZ/V2N support" * tag 'i3c/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (22 commits) i3c: fix big-endian FIFO transfers i3c: master: adi: fix number of bytes written to fifo i3c: Remove superfluous FIXME i3c: master: adi: fix header location i3c: dw: Add shutdown support to dw_i3c_master driver i3c: renesas: Simplify return statement in 'renesas_i3c_daa' dt-bindings: i3c: renesas,i3c: Add RZ/V2H(P) and RZ/V2N support i3c: master: svc: Recycle unused IBI slot i3c: master: svc: Use manual response for IBI events i3c: master: Add driver for Analog Devices I3C Controller IP dt-bindings: i3c: Add adi-i3c-master i3c: Fix default I2C adapter timeout value i3c: mipi-i3c-hci: Convert remaining DBG() prints to dev_dbg() i3c: mipi-i3c-hci: Remove function enter DBG() printouts i3c: mipi-i3c-hci: Uniform ring number printouts i3c: mipi-i3c-hci: Remove nonexistent ring interrupt i3c: mipi-i3c-hci: Change interrupt status prints to dev_dbg() i3c: mipi-i3c-hci: Use own DMA bounce buffer management for I2C transfers i3c: mipi-i3c-hci: Use physical device pointer with DMA API i3c: mipi-i3c-hci: Use core helpers for DMA mapping and bounce buffering ... |
||
|
Linus Torvalds
|
cf8da11679 |
i2c-for-6.18-rc1
Mostly DT bindings additions this time because Andi was super busy and I
also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates
- add the compatible for Giantec GT24C256C to the device-tree bindings
-----BEGIN PGP SIGNATURE-----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=LsC5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Mostly DT bindings additions this time because Andi was super busy and
I also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates:
- add the compatible for Giantec GT24C256C to the device-tree
bindings"
* tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
i2c: i801: Add support for Intel Wildcat Lake-U
dt-bindings: i2c: i2c-mt65xx: Add MediaTek MT8196/6991 compatibles
i2c: designware: Add disabling clocks when probe fails
i2c: designware: Fix clock issue when PM is disabled
i2c: busses: Fix some spelling errors
i2c: mux: Simplify boolean assignment in i2c_mux_alloc
i2c: designware: use dev_err_probe() when probing platform device
i2c: designware: convert to dev_err_probe() on request IRQ error
i2c: spacemit: ensure SDA is released after bus reset
i2c: spacemit: check SDA instead of SCL after bus reset
i2c: spacemit: disable SDA glitch fix to avoid restart delay
i2c: spacemit: remove stop function to avoid bus error
i2c: spacemit: ensure bus release check runs when wait_bus_idle() fails
i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD
i2c: boardinfo: Annotate code used in init phase only
dt-bindings: i2c: i2c-mt65xx: Document MediaTek MT6878 I2C
dt-bindings: i2c: samsung,s3c2410-i2c: Drop S3C2410
i2c: s3c2410: Drop S3C2410 OF support
dt-bindings: i2c: spacemit,k1-i2c: Minor whitespace cleanup in example
dt-bindings: i2c: exynos5: add samsung,exynos8890-hsi2c compatible
...
|
||
|
Linus Torvalds
|
5fb0249319 |
Pin control changes for the v6.18 kernel cycle:
Core changes:
- Allow pins to be identified/marked as GPIO mode with
a special callback. The pin controller core is now
"aware" if a pin is in GPIO mode if the callback is
implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a
line as GPIO and another function such as I2C. This
is enabled in the Qualcomm TLMM driver and also
implemeted from day 1 in the new Broadcom STB driver.
- Rename the pin config option PIN_CONFIG_OUTPUT to
PIN_CONFIG_LEVEL to better describe what the config is
doing, as well as making it more intuitive what shall
be returned when reading this property.
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver.
- Qualcomm Glymur family pin controller driver.
- Broadcom STB family pin controller driver.
- Tegra186 pin controller driver.
- AAEON UP pin controller support. This is some special
pin controller that works as an external advanced line
MUX and amplifier for signals from an Intel SoC.
A cooperative effort with the GPIO maintainer was
needed to reach a solution where we reuse code from
the GPIO aggregator/forwarder driver.
- Renesas RZ/T2H and RZ/N2H pin controller support.
- Axis ARTPEC-8 subdriver for the Samsung pin controller
driver.
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver.
- Properly support bias pull up/down in the pinctrl-single
driver.
- Move over all GPIO portions using generic MMIO GPIO to
the new generic GPIO chip management which has a nice and
separate API.
- Proper DT bindings for some older Broadcom SoCs.
- External GPIO (EGPIO) support in the Qualcomm SM8250.
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers.
-----BEGIN PGP SIGNATURE-----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=DZy/
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
|
||
|
Linus Torvalds
|
524c4a5daf |
Bug fixes and enhancements for IPMI
This request fixes a number of small bugs, but has some more major changes: Loongson-2K BMC support is added. This is an MFD device and is dependent on the changes coming from that tree. There is a conflict in the MAINTAINERS file and the MFD tree changes must be there before this is applied. The way the driver handles BMCs that have become non-functional has been completely redone. A number of changes in the past have attempted to handle various issues around this, but nothing has been very good. After working with some people on this, the code has been reworked to disable the driver and fail all pending operations if the BMC becomes non functional. It will retry the BMC once a second to see if it's back up. -corey -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAmjaykUACgkQYfOMkJGb /4G+9g//RTekqxKa4xH/1Q+WxUmYhISYKVdDIx3bhNw6O6o5NWDwve3bQu7V88a3 6LAazFRkS4jAN7wEWEV88MoO/EscPNSxWmxwZRjuQ/cCmnrqYn614K4b6IQ3io4C 0bxvHQ7X7kHedWUQvjKMtG6KYmBYMZtT7Ed5aEB4OlgtpFQLLmHDuQCMRIiGQPlr 9Gp62xngzp4FXotclZCLSAvHATMI7+eIuuBfGEXcrK0hT9PH+h2sImvesN250z8Z s4RWmSSrTGYYmCnz1waZAsVUH0dMGvnrJwWYuz2Nz/zxnWiNOhuVs3BrhalVrz51 tDBKERnOpkPTtktI/imW7+A9JgEdcGPL210X2mEcjkb9jv8EFonqfybbODbkadKr k8SV+7fyoKAIsbpRzXeJ6x59WGR2Ts2NmVoU1iGTP7DKhQ7X4xtE3U1J/7uGf+aI GldgOnWMAiHXoIT8wyF2okFJjpct0rme6683Tm9ICapseO++BBAgGooz5pTu4nNz VsxGvVdD6r9lZ+U7UAaa/1OlAE7jW/INuEnASQTqFWeILY4UkU+CnMnc4vs/YQqJ SLoxT1zNOmKC0eDhZWneNL98N/jdKIlGcD6FoRfAwsSPW4MD+oRyWtqKiACiRJjv Ka0RGJNKvg71xWdUclZtR6p4FNr0fbtYaNX1e/wTIp0gya7HXZQ= =mDVO -----END PGP SIGNATURE----- Merge tag 'for-linus-6.18-1' of https://github.com/cminyard/linux-ipmi Pull IPMI updates from Corey Minyard: "Bug fixes and enhancements for IPMI This fixes a number of small bugs, but has some more major changes: - Loongson-2K BMC support is added. This is an MFD device and is dependent on the changes coming from that tree. The way the driver handles BMCs that have become non-functional has been completely redone. A number of changes in the past have attempted to handle various issues around this, but nothing has been very good. After working with some people on this, the code has been reworked to disable the driver and fail all pending operations if the BMC becomes non functional. It will retry the BMC once a second to see if it's back up" * tag 'for-linus-6.18-1' of https://github.com/cminyard/linux-ipmi: ipmi: Add Loongson-2K BMC support ipmi:si: Gracefully handle if the BMC is non-functional ipmi: Rename "user_data" to "recv_msg" in an SMI message ipmi: Allow an SMI sender to return an error ipmi:si: Move flags get start to its own function ipmi:si: Merge some if statements ipmi: Set a timer for maintenance mode ipmi: Add a maintenance mode sysfs file ipmi: Disable sysfs access and requests in maintenance mode ipmi: Differentiate between reset and firmware update in maintenance dt-bindings: ipmi: aspeed,ast2400-kcs-bmc: Add missing "clocks" property ipmi: Rework user message limit handling Revert "ipmi: fix msg stack when IPMI is disconnected" ipmi:msghandler:Change seq_lock to a mutex |
||
|
Linus Torvalds
|
3ee22ad492 |
power supply and reset changes for the 6.18 series
* power-supply core
- introduce adc-battery-helper for capacity estimation based on
simple ADC readings of battery voltage and current
- add new property for battery internal resistance
- add new property for battery state of health
* power-supply drivers
- ug3105_battery: convert to adc-battery-helper
- intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
- rt9467-charger: add voltage and current ADC support
- sbs-charger: support multiple instances
- qcom_battmgr: add charge control support
- qcom_battmgr: add support for state of health and internal resistance
- max77705_charger: big driver cleanup
- max77705_charger: add support for setting charge current
- misc. minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=UcWZ
-----END PGP SIGNATURE-----
Merge tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce adc-battery-helper for capacity estimation based on
simple ADC readings of battery voltage and current
- add new properties for battery internal resistance and state of
health
Power-supply drivers:
- ug3105_battery: convert to adc-battery-helper
- intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
- rt9467-charger: add voltage and current ADC support
- sbs-charger: support multiple instances
- qcom_battmgr:
- add charge control support
- add support for state of health and internal resistance
- max77705_charger:
- big driver cleanup
- add support for setting charge current
- misc minor fixes and cleanups"
* tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: qcom_battmgr: handle charging state change notifications
power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro
power: supply: max77705_charger: rework interrupts
power: supply: max77705_charger: add writable properties
power: supply: max77705_charger: return error when config fails
power: supply: max77705_charger: use regfields for config registers
power: supply: max77705_charger: refactoring: rename charger to chg
mfd: max77705: max77705_charger: move active discharge setting to mfd parent
power: supply: max77976_charger: fix constant current reporting
power: supply: qcom_battmgr: Add charge control support
dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties
power: supply: qcom_battmgr: update compats for SM8550 and X1E80100
power: supply: qcom_battmgr: Add state_of_health property
power: supply: qcom_battmgr: Add resistance power supply property
power: supply: core: Add state_of_health power supply property
power: supply: core: Add resistance power supply property
power: supply: rx51: remove redundant condition checks
dt-bindings: power: supply: bq24190: document charge enable pin
dt-bindings: power: supply: bq27xxx: document optional interrupt
power: supply: intel_dc_ti_battery: Drop no longer relevant comment
...
|
||
|
Linus Torvalds
|
dba8acc3ef |
HSI changes for the 6.18 series
* Remove redundant pm_runtime_mark_last_busy() calls -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAmjcS64ACgkQ2O7X88g7 +ppamA//e+7dlQrKfeACk39Ys/uFGRB7q01TcIIShLpK6+IKOIK8jqW+Imk1vsoN ZZMmpLCmgkFnDyL8gTIsvu1a/vCH3iSUKR29Sn33OqpdLqEzbSM8X2oGhPWlcJxi WBWf9TY5zG0K78SDmZpC+BvzG3SFMPYGeC2vPBmeeO7zE56zuJcWQJv5CnRN1qMr Eg4SDWWgcP37X6SUlgh5ufev4OzUfdPKvE1GC4b9GLUXwkm6ne/+ppIlThu7P37Y EuweNdEZazwaObiFgbisqI2DZRvFHNIbeTc/GS0l+kZXmndVV1eROrDzg38sbbSq Js6EAbBDkiZwXH+M84Y4KG3mkrN65kUUD39FQ6oMUd5X+syFtSqpfKuc89JRuftV IlYm4YUMwkomY92d2nad3CpsOmJWvC7jRDjwRiUvJ78tWiu//iZCcS/7Admo+of0 k1HN/NQI6tsCF+o5Kyp4s4sN3wjKNfQ6+ynFTC7j75ZsmGBiKnaINPWMFE5o5auL uxgc9uh4jRP2fZHv9MTYfXTJHbJQyOR2Dgktl0diODpEAxpA3wn0ogEfpICrnc4a /aAyX++7hj2py4Dn6ThygEp1UZDlatK7aS08wFsxBvdfA2GHRfmGrsaOkBhblgSW t9u++c33Emfrr0ZGEGLChtBzPi87zNUPrwDXx1BIaBZ+uEGQVbY= =Xphr -----END PGP SIGNATURE----- Merge tag 'hsi-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI update from Sebastian Reichel: - Remove redundant pm_runtime_mark_last_busy() calls * tag 'hsi-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: omap_ssi_port: Remove redundant pm_runtime_mark_last_busy() calls |
||
|
Linus Torvalds
|
f07c3695bf |
firewire updates for v6.18
This update includes the following changes:
- Removal of the deprecated debug parameter from firewire-ohci module
- Replacement of the module-local workqueue in 1394 OHCI PCI driver with
a companion IRQ thread
- Refactoring of bus management code
- Additional minor code cleanup
The existing tracepoints serve as an alternative to the removed debug
parameter. The use of IRQ thread is experimental, as it handles 1394 OHCI
SelfIDComplete event only. It may be replaced in the future releases with
another approach; e.g. by providing workqueue from core functionality
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaNqKwQAKCRCsLtaWM8Lw
E8J0APwNtyOFP/r/ojGG8QezyDtxd67LPoU5ocLxEMsAUltE9QD+LMhtMkGXzz2r
Xfg54jwiEi52Y4eQ9r9UZhN78kmW8gw=
=tKD2
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This update includes the following changes:
- Removal of the deprecated debug parameter from firewire-ohci module
- Replacement of the module-local workqueue in 1394 OHCI PCI driver
with a companion IRQ thread
- Refactoring of bus management code
- Additional minor code cleanup
The existing tracepoints serve as an alternative to the removed debug
parameter. The use of IRQ thread is experimental, as it handles 1394
OHCI SelfIDComplete event only. It may be replaced in the future
releases with another approach; e.g. by providing workqueue from core
functionality"
* tag 'firewire-updates-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (43 commits)
firewire: core: fix undefined reference error in ARM EABI
Revert "firewire: core: disable bus management work temporarily during updating topology"
Revert "firewire: core: shrink critical section of fw_card spinlock in bm_work"
firewire: core: suppress overflow warning when computing jiffies from isochronous cycle
firewire: core: minor code refactoring to delete useless local variable
firewire: core; eliminate pick_me goto label
firewire: core: code refactoring to split contention procedure for bus manager
firewire: core: code refactoring for the case of generation mismatch
firewire: core: use switch statement to evaluate transaction result to CSR_BUS_MANAGER_ID
firewire: core: remove useless generation check
firewire: core: use struct_size and flex_array_size in ioctl_add_descriptor
firewire: core: shrink critical section of fw_card spinlock in bm_work
firewire: core: disable bus management work temporarily during updating topology
firewire: core: schedule bm_work item outside of spin lock
firewire: core: annotate fw_destroy_nodes with must-hold-lock
firewire: core: use spin lock specific to timer for split transaction
firewire: core: use spin lock specific to transaction
firewire: core: use spin lock specific to topology map
firewire: core: maintain phy packet receivers locally in cdev layer
firewire: core: use scoped_guard() to manage critical section to update topology
...
|
||
|
Linus Torvalds
|
d3479214c0 |
Backlight for v6.18
This set is comprised of a couple of small but important fixes and a number of clean-up and
refactoring patches. The fixes correct an EPROM address for the LP8556 and improve memory
allocation safety in the LED backlight driver.
The remainder of the set is made up of refactoring work to the mp3309c driver and a series of
patches to make a number of drivers more self-contained by including their own dependencies.
Improvements & Fixes
- Correct the EPROM start address for the LP8556 to align with the device's datasheet.
- Use devm_kcalloc() in the LED backlight driver for safer array allocation with overflow
protection.
Cleanups & Refactoring
- Drop an unnecessary call to pwm_apply_args() in the mp3309c driver.
- Modernize struct initialization in the mp3309c driver by using a compound literal instead of
memset.
- Make numerous drivers self-contained by including necessary headers directly rather than
relying on transitive includes from the core backlight header.
-----BEGIN PGP SIGNATURE-----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=ztY1
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"This set is comprised of a couple of small but important fixes and a
number of clean-up and refactoring patches. The fixes correct an EPROM
address for the LP8556 and improve memory allocation safety in the LED
backlight driver.
The remainder of the set is made up of refactoring work to the mp3309c
driver and a series of patches to make a number of drivers more
self-contained by including their own dependencies.
Improvements & Fixes:
- Correct the EPROM start address for the LP8556 to align with the
device's datasheet.
- Use devm_kcalloc() in the LED backlight driver for safer array
allocation with overflow protection.
Cleanups & Refactoring
- Drop an unnecessary call to pwm_apply_args() in the mp3309c driver.
- Modernize struct initialization in the mp3309c driver by using a
compound literal instead of memset.
- Make numerous drivers self-contained by including necessary headers
directly rather than relying on transitive includes from the core
backlight header"
* tag 'backlight-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: rt4831: Include <linux/mod_devicetable.h>
backlight: rave-sp: Include <linux/of.h> and <linux/mod_devicetable.h>
backlight: led_bl: Include <linux/of.h>
backlight: ktd2801: Include <linux/mod_devicetable.h>
backlight: jornada720: Include <linux/io.h>
backlight: da9052_bl: Include <linux/mod_devicetable.h>
backlight: as3711_bl: Include <linux/of.h>
backlight: apple_dwi_bl: Include <linux/mod_devicetable.h>
backlight: Include <linux/of.h>
video: backlight: lp855x_bl: Set correct EPROM start for LP8556
backlight: led_bl: Use devm_kcalloc() for array space allocation
backlight: mp3309c: Initialize backlight properties without memset
backlight: mp3309c: Drop pwm_apply_args()
|
||
|
Linus Torvalds
|
b386ef6286 |
LEDs for v6.18
This submission is a mix of new features, a number of fixes, some clean-up/refactoring and a
few Device Tree binding updates. The most significant changes include new device support for
the IS31FL3236A and QNAP's status LEDs, a number of fixes for the Qualcomm flash, LP55xx,
MAX77705 and QNAP MCU drivers, along with some generic LED consumer binding documentation and
unification.
New Support & Features
- Add support for the IS31FL3236A LED driver, including an optional 22kHz PWM frequency setting.
- Add support for the red and green status LEDs on QNAP MCU devices.
Improvements & Fixes
- Fix an issue in the MAX77705 driver where an error value was assigned but not returned.
- Correctly update the torch current clamp setting in the Qualcomm flash LED driver to prevent
unexpected clamping.
- Add a separate register map for the PMI8998 to the Qualcomm flash LED driver to handle its
unique register layout.
- Fix the state numbering for the USB LED in the QNAP MCU driver to avoid command conflicts.
- Correct the memory programming address calculation for non-paged devices like the LP5562 in
the LP55xx driver.
- Add Device Tree support to the generic led_get() function, allowing LEDs to be looked up by
name.
Cleanups & Refactoring
- Fix a spelling mistake in the Kconfig help text for the BD2606MVV driver.
- Use devm_mutex_init() in the IS31FL319x driver to simplify code.
Device Tree Bindings Updates
- Drop the redundant '-db' suffix from the IS31FL319x binding.
- Introduce generic LED consumer bindings for referencing LEDs via phandles.
- Unify the 'leds' property across several bindings to use the new generic consumer binding.
- Convert the AMS AS3645A LED controller binding to the DT schema format.
-----BEGIN PGP SIGNATURE-----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=zBjw
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"This submission is a mix of new features, a number of fixes, some
clean-up/refactoring and a few Device Tree binding updates. The most
significant changes include new device support for the IS31FL3236A and
QNAP's status LEDs, a number of fixes for the Qualcomm flash, LP55xx,
MAX77705 and QNAP MCU drivers, along with some generic LED consumer
binding documentation and unification.
New Support & Features:
- Add support for the IS31FL3236A LED driver, including an optional
22kHz PWM frequency setting.
- Add support for the red and green status LEDs on QNAP MCU devices.
Improvements & Fixes:
- Fix an issue in the MAX77705 driver where an error value was
assigned but not returned.
- Correctly update the torch current clamp setting in the Qualcomm
flash LED driver to prevent unexpected clamping.
- Add a separate register map for the PMI8998 to the Qualcomm flash
LED driver to handle its unique register layout.
- Fix the state numbering for the USB LED in the QNAP MCU driver to
avoid command conflicts.
- Correct the memory programming address calculation for non-paged
devices like the LP5562 in the LP55xx driver.
- Add Device Tree support to the generic led_get() function, allowing
LEDs to be looked up by name.
Cleanups & Refactoring:
- Fix a spelling mistake in the Kconfig help text for the BD2606MVV
driver.
- Use devm_mutex_init() in the IS31FL319x driver to simplify code.
Device Tree Bindings Updates:
- Drop the redundant '-db' suffix from the IS31FL319x binding.
- Introduce generic LED consumer bindings for referencing LEDs via
phandles.
- Unify the 'leds' property across several bindings to use the new
generic consumer binding.
- Convert the AMS AS3645A LED controller binding to the DT schema
format"
* tag 'leds-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: as3645: Convert to DT schema
leds: led-class: Add Device Tree support to led_get()
dt-bindings: leds: Unify 'leds' property
dt-bindings: leds: Add generic LED consumer documentation
leds: is31fl319x: Use devm_mutex_init()
leds: leds-lp55xx: Use correct address for memory programming
dt-bindings: leds: issi,is31fl319x: Drop 'db' suffix duplicating dtschema
leds: qnap-mcu: Add support for the red and green status LEDs
leds: qnap-mcu: Fix state numbering for USB LED
leds: flash: leds-qcom-flash: Add a separate register map for PMI8998
leds: flash: leds-qcom-flash: Update torch current clamp setting
leds: max77705: Function return instead of variable assignment
leds: Kconfig: Fix spelling mistake "limitiation" -> "limitation"
leds: leds-is31fl32xx: Add support for is31fl3236a
|
||
|
Linus Torvalds
|
b4918003cf |
MFD for v6.18
This round of updates contains a fair amount of new device support, a couple of fixes and
some refactoring. The most notable additions include new drivers for Loongson's Security
Engine, RNG and TPM, new drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a refactoring to use a more modern
GPIO API for the VEXPRESS sysreg driver, the removal of a deprecated IRQ ACK function from the
MC13xxx RTC driver and a new DT binding for the aforementioned TI BQ257xx charger.
New Support & Features
- Add a suite of drivers for the Loongson Security Engine, including the core controller, a
Random Number Generator (RNG) and Trusted Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including the input driver, MFD
cell registration, and a system power-off handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs, including the core MFD
driver and a power supply driver for the charger functionality.
Improvements & Fixes
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS sysreg driver to prevent
potential silent failures.
Cleanups & Refactoring
- Add a MAINTAINERS entry for the new Loongson Security Engine drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO chip API.
Removals
- Remove the deprecated and unused mc13xxx_irq_ack() function from the MC13xxx RTC, input and
touchscreen drivers.
Device Tree Bindings Updates
- Add device tree bindings for the TI BQ25703A charger.
-----BEGIN PGP SIGNATURE-----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=h21C
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
|
||
|
Linus Torvalds
|
2d27453624 |
MMC core:
- Improve RPMB frame handling code
- Add support for a new max-sd-hs-hz DT property to limit frequency
- Add support to manage regulator-under-voltage events
- Support regulator-under-voltage for eMMC to mitigate data corruptions
- Add mmc_read_tuning() to allow a host to validate its tuning sequence
- Add some helpers to align checks for CMD23 support
- Read the CCCR register for SDIO over SPI rather than the unsupported CMD7
MMC host:
- Add COMPILE_TEST option for a couple of drivers
- Convert drivers to use the modern PM macros
- dw_mmc-exynos: Enable support for the Exynos8890 variant
- mmc_spi: Don't use crc ack during multiple block read
- renesas_sdhi: Enable 64-bit polling mode for R-Car gen3 and RZ/G2L SoCs
- rtsx_usb: Add support for over-current-protection
- sdhci-cadence: Add support for multi-block read gap tuning
- sdhci-msm: Add support for tuning for SDR50 mode for SD cards
- sdhci-msm: Enable support for the Lemans variant
- sdhci-pci: Disable SD card clock before update for a few Intel platforms
- sdhci-pxav3: Add support for UHS pinctrl settings
- tmio: Add 64-bit read/write support in polling mode
MEMSTICK:
- Convert to use timeouts to prevent indefinite waiting
- rtsx_usb: Add support for over-current-protection
-----BEGIN PGP SIGNATURE-----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=D2yD
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve RPMB frame handling code
- Add support for a new max-sd-hs-hz DT property to limit frequency
- Add support to manage regulator-under-voltage events
- Support regulator-under-voltage for eMMC to mitigate data
corruptions
- Add mmc_read_tuning() to allow a host to validate its tuning
sequence
- Add some helpers to align checks for CMD23 support
- Read the CCCR register for SDIO over SPI rather than the
unsupported CMD7
MMC host:
- Add COMPILE_TEST option for a couple of drivers
- Convert drivers to use the modern PM macros
- dw_mmc-exynos: Enable support for the Exynos8890 variant
- mmc_spi: Don't use crc ack during multiple block read
- renesas_sdhi: Enable 64-bit polling mode for R-Car gen3 and
RZ/G2L SoCs
- rtsx_usb: Add support for over-current-protection
- sdhci-cadence: Add support for multi-block read gap tuning
- sdhci-msm:
- Add support for tuning for SDR50 mode for SD cards
- Enable support for the Lemans variant
- sdhci-pci: Disable SD card clock before update for a few
Intel platforms
- sdhci-pxav3: Add support for UHS pinctrl settings
- tmio: Add 64-bit read/write support in polling mode
MEMSTICK:
- Convert to use timeouts to prevent indefinite waiting
- rtsx_usb: Add support for over-current-protection"
* tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (77 commits)
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8890
mmc: select REGMAP_MMIO with MMC_LOONGSON2
mmc: add COMPILE_TEST to multiple drivers
mmc: core: Improve RPMB frame handling code
mmc: core: Fix variable shadowing in mmc_route_rpmb_frames()
mmc: core: Parse and use the new max-sd-hs-hz DT property
dt-bindings: mmc: controller: Add max-sd-hs-hz property
mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card
dt-bindings: mmc: sdhci-msm: Document the Lemans compatible
mmc: sh_mmcif: Remove dummy PM resume callback
dt-bindings: mmc: sdhci-pxa: Add minItems to pinctrl-names
mmc: sdio: Drop dev_pm_domain_detach() call
mmc: dw_mmc-rockchip: use modern PM macros
mmc: dw_mmc-pci: use modern PM macros
mmc: dw_mmc-k3: use modern PM macros
mmc: dw_mmc: exynos: use modern PM macros
mmc: via-sdmmc: use modern PM macros
mmc: sdhci-msm: use modern PM macros
mmc: mtk-sd: use modern PM macros
mmc: wmt-sdmmc: use modern PM macros
...
|
||
|
Linus Torvalds
|
e93bcbaa71 |
pmdomain providers:
- amlogic: Add support for S6/S7/S7D power-domains controller
- imx: Add support for i.MX91 power-domains
- marvell: Add support for PXA1908 power-domains
- mediatek: Add support for modem power sequence
- mediatek: Add support for RTFF Hardware in MT8196/MT6991
- qcom: Align power-domain definitions for rpmpd
- rockchip: Default to use power-domain support
- thead: Create auxiliary device along with a corresponding reset driver
- ti: Synchronize on/off state with HW-state for ti-sci power-domains
-----BEGIN PGP SIGNATURE-----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=/gH0
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- amlogic: Add support for S6/S7/S7D power-domains controller
- imx: Add support for i.MX91 power-domains
- marvell: Add support for PXA1908 power-domains
- mediatek:
- Add support for modem power sequence
- Add support for RTFF Hardware in MT8196/MT6991
- qcom: Align power-domain definitions for rpmpd
- rockchip: Default to use power-domain support
- thead: Create auxiliary device along with a corresponding reset
driver
- ti: Synchronize on/off state with HW-state for ti-sci power-domains
* tag 'pmdomain-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: thead: Fix error pointer vs NULL bug in th1520_pd_reboot_init()
pmdomain: thead: create auxiliary device for rebooting
driver: reset: th1520-aon: add driver for poweroff/reboot via AON FW
pmdomain: mediatek: airoha: convert from round_rate() to determine_rate()
pmdomain: rockchip: enable ROCKCHIP_PM_DOMAINS with ARCH_ROCKCHIP
pmdomain: marvell: Add PXA1908 power domains
dt-bindings: clock: marvell,pxa1908: Add syscon compatible to apmu
pmdomain: ti-sci: Set PD on/off state according to the HW state
pmdomain: amlogic: Add support for S6 S7 S7D power domains controller
dt-bindings: power: add Amlogic S6 S7 S7D power domains
pmdomain: mediatek: Convert all SoCs to new style regmap retrieval
pmdomain: mediatek: Add support for RTFF Hardware in MT8196/MT6991
pmdomain: mediatek: Add support for modem power sequences
pmdomain: mediatek: Move ctl sequences out of power_on/off functions
pmdomain: mediatek: Handle SoCs with inverted SRAM power-down bits
pmdomain: mediatek: Refactor bus protection regmaps retrieval
dt-bindings: power: mediatek: Document access-controllers property
pmdomain: remove unneeded 'fast_io' parameter in regmap_config
pmdomain: imx93-blk-ctrl: mask DSI and PXP PD domain register on i.MX91
pmdomain: imx93-blk-ctrl: use ARRAY_SIZE() instead of hardcode number
...
|
||
|
Linus Torvalds
|
ea1c6c5925 |
spi: Updates for v6.18
There's one big core change in this release, Jonas Gorski has addressed
the issues with multiple chip selects which makes things more robust and
stable. Otherwise there's quite a bit of driver work, as well as some
new drivers several existing drivers have had quite a bit of work done
on them.
Possibly the most interesting thing is the VirtIO driver, this is
apparently useful for some automotive applications which want to keep as
small and robust a host system as they can, moving less critical
functionality into guests.
- James Clark has done some substantial updates on the Freescale DSPI
driver, porting in code from the BSP and building onm top of that to
fix some bugs and increase performance.
- Jonas Gorski has fixed the issues with handling multple chip selects,
making things more robust and scalable.
- Support for higher performance modes in the NXP FSPI driver from
Haibo Chen.
- Removal of the obsolete S3C2443 driver, the underlying SoC support
has been removed from the kernel.
- Support for Amlogic AL113L2, Atmel SAMA7D65 and SAM9x7 and for VirtIO
controllers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjacIwACgkQJNaLcl1U
h9CueQf/abv7rjoK4EbGeQBp3V3lQWAmB6en8SatMGf3ff8mKwsZLsePWYqpd8ir
e4Dk5mj+R6HYEDKdXg5SW6+5BpMyiiBkfJpUq7OMQg+86wOsBGHPuZw/65+sGc+R
hyy6AGf0YahmPiqeQVqJubYeqwWbFFCaOBWR3Q45aWhGQhRGG04vRESks1F247cl
EAuPhhBpS30o5NzhBanqW6s5scQ4dYFIIl/KTHZQyaRgG2lT4CvRObmhco+Yyl/O
4Mge0h/MMBx+UliuwQaPCp72h7DfA4iTeKdsnUYcfQW/OB3DZDye9HKN29k3CZyf
6brBp14ZZ+fvseg8GW/pAsT3YQIHwg==
=XwEA
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's one big core change in this release, Jonas Gorski has
addressed the issues with multiple chip selects which makes things
more robust and stable. Otherwise there's quite a bit of driver work,
as well as some new drivers several existing drivers have had quite a
bit of work done on them.
Possibly the most interesting thing is the VirtIO driver, this is
apparently useful for some automotive applications which want to keep
as small and robust a host system as they can, moving less critical
functionality into guests.
- James Clark has done some substantial updates on the Freescale DSPI
driver, porting in code from the BSP and building onm top of that
to fix some bugs and increase performance
- Jonas Gorski has fixed the issues with handling multple chip
selects, making things more robust and scalable
- Support for higher performance modes in the NXP FSPI driver from
Haibo Chen
- Removal of the obsolete S3C2443 driver, the underlying SoC support
has been removed from the kernel
- Support for Amlogic AL113L2, Atmel SAMA7D65 and SAM9x7 and for
VirtIO controllers"
* tag 'spi-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (74 commits)
spi: ljca: Remove Wentong's e-mail address
spi: rename SPI_CS_CNT_MAX => SPI_DEVICE_CS_CNT_MAX
spi: reduce device chip select limit again
spi: don't check spi_controller::num_chipselect when parsing a dt device
spi: drop check for validity of device chip selects
spi: move unused device CS initialization to __spi_add_device()
spi: keep track of number of chipselects in spi_device
spi: fix return code when spi device has too many chipselects
SPI: Add virtio SPI driver
virtio-spi: Add virtio-spi.h
virtio: Add ID for virtio SPI
spi: rpc-if: Add resume support for RZ/G3E
spi: rpc-if: Drop deprecated SIMPLE_DEV_PM_OPS
spi: spi-qpic-snand: simplify clock handling by using devm_clk_get_enabled()
spi: spi-nxp-fspi: Add OCT-DTR mode support
spi: spi-nxp-fspi: add the support for sample data from DQS pad
spi: spi-nxp-fspi: Add the DDR LUT command support
spi: spi-nxp-fspi: set back to dll override mode when clock rate < 100MHz
spi: spi-nxp-fspi: extract function nxp_fspi_dll_override()
spi: atmel-quadspi: Add support for sama7d65 QSPI
...
|
||
|
Linus Torvalds
|
ad6657804c |
regulator: Updates for v6.18
This is a very quiet release for regulator, almost all the changes are
new drivers but we do also have some improvements for the Rust bindings.
- Additional APIs added to the Rust bindings.
- Support for Maxim MAX77838, NXP PF0900 and PF5300, Richtek RT5133 and
SpacemiT P1.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjaaAQACgkQJNaLcl1U
h9BrVQf9FfsEXB3H3+L9m0ZGfbjOuxAtz/tdQKyroHK5R0AVz9ggpzWyKjrl38p6
fXQgWCcUdak/OjBlh/a2oiCmmJIO3KosPY34rinFErWg1vTBkjsMcT+7K9IdYTlq
H9+gMQKBD/zViX1X+qm1rZ9BLNGYuSotvbSETYleAFv46jPYGDOlLsCo2LPHX9lh
NLmBYZDqgtul0gl4S2n82rT2LAw9Omdy0ooNOvDQDrEQo/ovFpQ1XTScrlKLQomv
eZ0U2zhtbGTa6s86SMG37TKAsUtPmmGpUvxApilzwLkXaO04/7Fp0944wTAlynCE
LHSdp7rhmOBvRVczejqV83+4kAzM5Q==
=XSA0
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a very quiet release for regulator, almost all the changes are
new drivers but we do also have some improvements for the Rust
bindings.
- Additional APIs added to the Rust bindings
- Support for Maxim MAX77838, NXP PF0900 and PF5300, Richtek RT5133
and SpacemiT P1"
* tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (28 commits)
regulator: dt-bindings: qcom,sdm845-refgen-regulator: document more platforms
regulator: Fix MAX77838 selection
regulator: spacemit: support SpacemiT P1 regulators
regulator: max77838: add max77838 regulator driver
dt-bindings: regulator: document max77838 pmic
rust: regulator: add devm_enable and devm_enable_optional
rust: regulator: remove Regulator<Dynamic>
regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
regulator: pf530x: Add a driver for the NXP PF5300 Regulator
regulator: dt-bindings: nxp,pf530x: Add NXP PF5300/PF5301/PF5302 PMICs
regulator: scmi: Use int type to store negative error codes
regulator: core: Remove redundant ternary operators
rust: regulator: use `to_result` for error handling
regulator: consumer.rst: document bulk operations
regulator: rt5133: Fix IS_ERR() vs NULL bug in rt5133_validate_vendor_info()
regulator: bd718x7: Use kcalloc() instead of kzalloc()
regulator: rt5133: Fix spelling mistake "regualtor" -> "regulator"
regulator: remove unneeded 'fast_io' parameter in regmap_config
regulator: rt5133: Add RT5133 PMIC regulator Support
regulator: dt-bindings: Add Richtek RT5133 Support
...
|
||
|
Linus Torvalds
|
c252b8cf12 |
regmap: Updates for v6.18
This just contains a few small fixes, there's been no substantial development on regmap this release cycle. -----BEGIN PGP SIGNATURE----- iQEyBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjaZL0ACgkQJNaLcl1U h9AOrwf4r9lTbzbpwoKKZs/BUK8QvAZDgIZTjtCsEA5OScLMNeaxw/rKlsynekj4 TwrbCQdZ0GTRH5lLSM/pThGpc7XRopRTuGAndLPczjAdnkwuUPFJiwbtCfXwO5SC 8BTgRSIjQjko4yKbQoq5IY6kVtjGsM6bCHmHx8PZv4FJm5WK+fOsh4ggMJCJ2uVa WAcgYqur8CU790DDeIZjX0E6ZqgnEm7dSGicKtul75EcsNC8CqXxRb7spAfk9SLF FkunL5IRzjje4luVmyIHWNHoYnAmq9pMCzvTyTE3/3M7xsjkcbAN+js1z85XP+Fc I8Ogk6QtVNeVsy0k9hhosAEahZiL =XrkM -----END PGP SIGNATURE----- Merge tag 'regmap-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "This just contains a few small fixes, there's been no substantial development on regmap this release cycle" * tag 'regmap-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: use int type to store negative error codes regmap: Remove superfluous check for !config in __regmap_init() regmap: mmio: Add missing MODULE_DESCRIPTION() |
||
|
Linus Torvalds
|
d5f7411411 |
gpio updates for v6.18-rc1
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder API
to other in-kernel users (to enable merging of a new pinctrl driver
that uses it)
- convert all remaining drivers to using the modernized generic GPIO chip
API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve its
support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO drivers
that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled with
COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding
-----BEGIN PGP SIGNATURE-----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=TZ1G
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
|
||
|
Linus Torvalds
|
c050daf69f |
pwm: Changes for v6.18-rc1
The core highlights for this cycle are:
- The pca9586 driver was converted to the waveform API.
- Waveform drivers automatically provide a gpio chip to make PWMs
usable as GPIOs. (The pca9586 driver did that in a driver specific
implementation before.)
Otherwise it's the usual mix of fixes and device tree and driver changes
to support new hardware variants.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmjaFu0ACgkQj4D7WH0S
/k5Kdwf/escCaVLlbhgZlxFJgyJAo7KStgS7brer8nYXoBt21yyTqG0dDjObKDWz
yqqyfSM1tQ/eIRk5Q+I0LImeEnwA5yD/JKvFPwm6QMORt+loDvRcellCBhUVkBEe
MDmYrApVfShGe72IeBSLekvdtmd54UDFKfNzI7jrV5r5W/yQYnFTBY9W+MTYntj7
9QPtHLH8Kw0Yak1p90ZeYCNsVD6l1dTdo0abZZuYSjj4xmG2gpNZj7z5CbRePW8X
5JDT2XsgSMmMXlQOFgoGDEwc8qgAnlwmzWcEce1TsDZUQbFtGpzKckfF4EGo/OI4
M8pOZBA5TgmRtvTFdwUDZrB9n1+hZw==
=ExLO
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"The core highlights for this cycle are:
- The pca9586 driver was converted to the waveform API
- Waveform drivers automatically provide a gpio chip to make PWMs
usable as GPIOs (The pca9586 driver did that in a driver specific
implementation before)
Otherwise it's the usual mix of fixes and device tree and driver
changes to support new hardware variants"
* tag 'pwm/for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (30 commits)
pwm: cros-ec: Avoid -Wflex-array-member-not-at-end warnings
dt-bindings: pwm: samsung: add exynos8890 compatible
dt-bindings: pwm: apple,s5l-fpwm: Add t6020-fpwm compatible
dt-bindings: pwm: nxp,lpc1850-sct-pwm: Minor whitespace cleanup in example
pwm: pca9586: Convert to waveform API
pwm: pca9685: Drop GPIO support
pwm: pca9685: Make use of register caching in regmap
pwm: pca9685: Use bulk write to atomicially update registers
pwm: pca9685: Don't disable hardware in .free()
pwm: Add the S32G support in the Freescale FTM driver
dt-bindings: pwm: fsl,vf610-ftm-pwm: Add compatible for s32g2 and s32g3
pwm: mediatek: Lock and cache clock rate
pwm: mediatek: Fix various issues in the .apply() callback
pwm: mediatek: Implement .get_state() callback
pwm: mediatek: Initialize clks when the hardware is enabled at probe time
pwm: mediatek: Rework parameters for clk helper function
pwm: mediatek: Introduce and use a few more register defines
pwm: mediatek: Simplify representation of channel offsets
pwm: tiecap: Document behaviour of hardware disable
pwm: Provide a gpio device for waveform drivers
...
|
||
|
Linus Torvalds
|
989253cc46 |
hwmon updates for v6.18-rc1
* New drivers - Driver for Kontron SMARC-sAM67 - Driver for GPD device sensors - Driver for MP29502 - Driver for MP2869, MP29608, MP29612 and MP29816 series * Added chip support to existing drivers - asus-ec-sensors: Add B650E-I Add PRIME Z270-A Add Pro WS WRX90E-SAGE SE Add ROG STRIX X670E-E GAMING WIFI Add ROG STRIX X870-I GAMING WIFI Add ROG STRIX X870E-E GAMING WIFI Add ROG STRIX Z690-E GAMING WIFI Add ROG STRIX Z790E GAMING WIFI II Add STRIX B850-I GAMING WIFI Add TUF GAMING X670E PLUS WIFI Add X670E-I GAMING WIFI Add Z790-I GAMING WIFI - dell-smm: Add support for Dell OptiPlex 7040 - ina238: Major cleanup, and Add support for INA700 Add support for INA780 - k10temp: Add device ID for Strix Halo Add support for AMD Family 1Ah-based models - lenovo-ec-sensors: Update P8 supprt - lm75: Add NXP P3T1750 support - pmbus/adm1275: Add sq24905c support - pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246 - pmbus/mp5990: Add support for MP5998 - sht21: Add support for SHT20, SHT25 - sl28cpld: Add sa67mcu compatible * Other notable changes - core: Handle locking internally Introduce 64-bit energy attribute support - cros_ec: Register into thermal framework, improve PWM control - lm75: allow interrupt for ti,tmp75 - mlxreg-fan: Add support for new flavour of capability register - sbtsi_temp: AMD CPU extended temperature range support - sht21: Add devicetree support * Various other minor improvements and fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmjZ2VAACgkQyx8mb86f mYHegQ//YImjHnlWcRbr8meprHHezIkGDA0nJEzjsCSD7owq00sOC4w4BGXf7MPV d1rK0VbAU2Up53j4xZKr7PnHzUHFil/K/9hDBHFfYd6fr570ADdMnewRmVoKuSuR JBeV0308y0WbeAhNOaIIcGx3/4wMgQklvUycjOZKUgBC2jY/vnuwlgrt21a4rbB/ c5yNUEfqk9thZY/xOBbbrcvej0RXZ/naV+tRgVYQUo6Ep1CUynxOr2VCUbWxoQWh lnekEhJuylbIDodAZ405Cpn3AuqyVypbKBjAyGWSwl92KuoYyBGJnbk/GYokWvCH ftMlLF+HUbNRd75W3mwxZOuSX5tIps2NP8aQrdRdOxhF6Ln5b49R4NLI7ZqnOVzO syRo96J1joMIGwfRga/b8dqCLYZ45fX2VbfisdhrzZ0OM3e7yg3fVyJRbxubP+n6 VxCQPfFUQoLKGOAiBfCA5yYCDE+qFXT1HBKORhtUF/wZnq6X7rYMtC0ci0TfcKo0 Ar0s4xnxX2avFhySvuJL7snv01oOR/9SkCrKY4LqXETMSvNwTNQjLKGo0uly+Mxs bs63JFnLtA1BHXvPuFklxDMAqQ4KZZAz1AznePFV7uFRk2VRbzKf1GkS4S9jVlc+ 2/nKb2gWBVdtAqone0D0dC9EoFNZwGqCPuymyTgEkYkO0vgZ2qs= =jb6g -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers: - Kontron SMARC-sAM67 - GPD device sensors - MP29502 - MP2869, MP29608, MP29612 and MP29816 series Added chip support to existing drivers: - asus-ec-sensors: Add B650E-I Add PRIME Z270-A Add Pro WS WRX90E-SAGE SE Add ROG STRIX X670E-E GAMING WIFI Add ROG STRIX X870-I GAMING WIFI Add ROG STRIX X870E-E GAMING WIFI Add ROG STRIX Z690-E GAMING WIFI Add ROG STRIX Z790E GAMING WIFI II Add STRIX B850-I GAMING WIFI Add TUF GAMING X670E PLUS WIFI Add X670E-I GAMING WIFI Add Z790-I GAMING WIFI - dell-smm: Add support for Dell OptiPlex 7040 - ina238: Major cleanup, and Add support for INA700 Add support for INA780 - k10temp: Add device ID for Strix Halo Add support for AMD Family 1Ah-based models - lenovo-ec-sensors: Update P8 supprt - lm75: Add NXP P3T1750 support - pmbus/adm1275: Add sq24905c support - pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246 - pmbus/mp5990: Add support for MP5998 - sht21: Add support for SHT20, SHT25 - sl28cpld: Add sa67mcu compatible Other notable changes: - core: Handle locking internally Introduce 64-bit energy attribute support - cros_ec: Register into thermal framework, improve PWM control - lm75: allow interrupt for ti,tmp75 - mlxreg-fan: Add support for new flavour of capability register - sbtsi_temp: AMD CPU extended temperature range support - sht21: Add devicetree support Various other minor improvements and fixes" * tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits) dt-bindings: hwmon: (lm75) allow interrupt for ti,tmp75 hwmon: (mlxreg-fan) Add support for new flavour of capability register hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems hwmon: (cros_ec) register fans into thermal framework cooling devices hwmon: (cros_ec) add PWM control over fans platform/chrome: update pwm fan control host commands hwmon: add SMARC-sAM67 support dt-bindings: hwmon: sl28cpld: add sa67mcu compatible hwmon: (asus-ec-sensors) add TUF GAMING X670E PLUS WIFI hwmon: (dell-smm) Add support for Dell OptiPlex 7040 hwmon: (dell-smm) Add support for automatic fan mode hwmon: (gpd-fan) complete Kconfig dependencies hwmon: (asus-ec-sensors) increase timeout for locking ACPI mutex hwmon: (asus-ec-sensors) add ROG STRIX X870E-E GAMING WIFI hwmon: (dell-smm) Move clamping of fan speed out of i8k_set_fan() hwmon: (dell-smm) Remove Dell Precision 490 custom config data hwmon: (asus-ec-sensors) add ROG STRIX X670E-E GAMING WIFI hwmon: (gpd-fan) Fix range check for pwm input hwmon: (pmbus/mp5990) add support for MP5998 dt-bindings: trivial-devices: add mps,mp5998 ... |
||
|
Linus Torvalds
|
57cf7a603b |
chrome-platform: Updates for v6.18
* New
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready.
* Improvements
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning.
- Defer probe until parent EC device is ready in cros_ec_keyb.
* Cleanups
- Remove redundant and simplify code in cros_ec_chardev.
- Centralize cros_ec_device allocation and initialization to remove
duplicate code.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCaNku+BMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0DFkA/0+FF785x38lKTlAnJMSlNcABwYzsi9Z
b70Yc2ytNzp8AP9x5gk68EdwkLF97Mu08JvL8ZUPL6z5jQ3PPd96QDcrCg==
=zRIv
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready
Improvements:
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning
- Defer probe until parent EC device is ready in cros_ec_keyb
Cleanups:
- Remove redundant and simplify code in cros_ec_chardev
- Centralize cros_ec_device allocation and initialization to remove
duplicate code"
* tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
Input: cros_ec_keyb - Defer probe until parent EC device is registered
platform/chrome: cros_ec: Add a flag to track registration state
platform/chrome: cros_ec: Separate initialization from cros_ec_register()
platform/chrome: Centralize common cros_ec_device initialization
platform/chrome: Centralize cros_ec_device allocation
platform/chrome: wilco_ec: Remove redundant semicolons
platform/chrome: cros_ec: Avoid -Wflex-array-member-not-at-end warning
platform/chrome: cros_ec_chardev: Decouple fops from struct cros_ec_dev
platform/chrome: cros_ec_chardev: Remove redundant struct field
|
||
|
Linus Torvalds
|
eb3289fc47 |
Driver core changes for 6.18-rc1
- Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
- Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom callbacks
through a File-type-based and directory-scope-based API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific read_poll_timeout()
helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs based on
(&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor and class
ID numbers
- Implement Display to print actual vendor and class names; Debug to print
the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
- sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
- Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaNmQGwAKCRBFlHeO1qrK
LmPzAP9msIvK8eFT4CEDK4buX1gd+VBOdy8mAjAeJ2F80FIo8wEAtOdddNaaqWVF
m4ac2/a2bSRKMGPX+wIM7d2HGyC7sgY=
=XbU+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
|
||
|
Ioana Ciornei
|
b9d6cfe2ae |
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
Extend the list of supported devices with the QIXIS FPGA found on the LX2160ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Ioana Ciornei
|
3ed50d7792 |
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
Reorder the of_device_id structures so that they are in alphabetical order. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Jihed Chaibi
|
02dde2c4c3 |
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
Update the main TI TWL-family binding to be self-contained and to fix pre-existing validation errors. To ensure future patches are bisectable, child nodes whose bindings are in other patches (audio, keypad, usb, etc.) are now defined using a flexible 'additionalProperties: true' pattern. This removes hard dependencies between the MFD and subsystem bindings. The complete dtbs_check for this binding is clean except for two warnings originating from pre-existing bugs in the OMAP DTS files, for which fixes have already been submitted separately [1][2]. Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <ukleinek@kernel.org> Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com> Reviewed-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Michael Walle
|
354f31e9d2 |
dt-bindings: watchdog: Add SMARC-sAM67 support
The SMARC-sAM67 board has an on-board uC which has the same register interface as the older CPLD implementation on the SMARC-sAL28 board. Although the MCU emulates the same behavior, be prepared for any quirks and add a board specific compatible. Signed-off-by: Michael Walle <mwalle@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Michael Walle
|
59863239e0 |
dt-bindings: mfd: tps6594: Allow gpio-line-names
Setting the signal names in the device tree was already possible, but it will lead to a warning. Allow the gpio-line-names property to fix that. Signed-off-by: Michael Walle <mwalle@kernel.org> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Ilpo Järvinen
|
c91a0e4e54 |
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
Add Intel Wildcat Lake PCI IDs. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250915112936.10696-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Duje Mihanović
|
73ba00d86a |
mfd: 88pm886: Add GPADC cell
Add a cell for the PMIC's onboard General Purpose ADC. Acked-by: Karel Balej <balejk@matfyz.cz> # for the PMIC Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz> Link: https://lore.kernel.org/r/20250911-88pm886-gpadc-v4-3-60452710d3a0@dujemihanovic.xyz Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Bartosz Golaszewski
|
800d2c631c |
mfd: vexpress-sysreg: Use more common syntax for compound literals
The (typeof(foo)) construct is unusual in the kernel, use a more typical syntax by explicitly spelling out the type. Link: https://lore.kernel.org/all/20250909-gpio-mmio-gpio-conv-part4-v1-13-9f723dc3524a@linaro.org/ Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20250910-make-compound-literals-normal-again-v1-1-076ee7738a0b@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Cosmin Tanislav
|
da32b0e82c |
mfd: rz-mtu3: Fix MTU5 NFCR register offset
The NFCR register for MTU5 is at 0x1a95 offset according to Datasheet
Page 725, Table 16.4. The address of all registers is offset by 0x1200,
making the proper address of MTU5 NFCR register be 0x895.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Dzmitry Sankouski
|
605c9820e4 |
mfd: max77705: Setup the core driver as an interrupt controller
Current implementation describes only MFD's own topsys interrupts.
However, max77705 has a register which indicates interrupt source, i.e.
it acts as an interrupt controller. There's 4 interrupt sources in
max77705: topsys, charger, fuelgauge, usb type-c manager.
Setup max77705 MFD parent as an interrupt controller. Delete topsys
interrupts because currently unused.
Remove shared interrupt flag, because we're are an interrupt controller
now, and subdevices should request interrupts from us.
Fixes:
|
||
|
Charles Keepax
|
afe0f94992 |
mfd: cs42l43: Remove IRQ masking in suspend
Now the individual child drivers mask their own IRQs there is no need for the MFD code to do so anymore. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250903094549.271068-7-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Charles Keepax
|
62aec8a0a5 |
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
As pm_runtime_force_suspend() will force the device state to suspend, the driver needs to ensure no IRQ handlers are currently running. If not those handlers may find they are now running on suspended hardware despite holding a PM runtime reference. disable_irq() will sync any currently running handlers, so move the IRQ disabling to cover the whole of the forced suspend state to avoid such race conditions. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250903094549.271068-6-ckeepax@opensource.cirrus.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Binbin Zhou
|
d952bba3fb |
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
Since the display is a sub-function of the Loongson-2K BMC, when the BMC reset, the entire BMC PCIe is disconnected, including the display which is interrupted. Quick overview of the entire LS2K BMC reset process: There are two types of reset methods: soft reset (BMC-initiated reboot of IPMI reset command) and BMC watchdog reset (watchdog timeout). First, regardless of the method, an interrupt is generated (PCIe interrupt for soft reset/GPIO interrupt for watchdog reset); Second, during the interrupt process, the system enters bmc_reset_work, clears the bus/IO/mem resources of the LS7A PCI-E bridge, waits for the BMC reset to begin, then restores the parent device's PCI configuration space, waits for the BMC reset to complete, and finally restores the BMC PCI configuration space. Display restoration occurs last. Co-developed-by: Chong Qiao <qiaochong@loongson.cn> Signed-off-by: Chong Qiao <qiaochong@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Acked-by: Corey Minyard <corey@minyard.net> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Link: https://lore.kernel.org/r/de4e04b42ff9ee282f86f9bb9efbf959a9848205.1756987761.git.zhoubinbin@loongson.cn Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Binbin Zhou
|
0d64f6d1ff |
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
The Loongson-2K Board Management Controller provides an PCIe interface to the host to access the feature implemented in the BMC. The BMC is assembled on a server similar to the server machine with Loongson-3 CPU. It supports multiple sub-devices like DRM and IPMI. Co-developed-by: Chong Qiao <qiaochong@loongson.cn> Signed-off-by: Chong Qiao <qiaochong@loongson.cn> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Acked-by: Corey Minyard <corey@minyard.net> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Link: https://lore.kernel.org/r/0dc1fd53020ce2562453961ffed2cd9eb8f359e1.1756987761.git.zhoubinbin@loongson.cn Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Matti Vaittinen
|
719d02a25a |
mfd: bd71828, bd71815: Prepare for power-supply support
Add core support for ROHM BD718(15/28/78) PMIC's charger blocks. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20250821-bd71828-charger-v3-1-cc74ac4e0fb9@kemnade.info Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Ryan Chen
|
b445c14ac7 |
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
Add SCU interrupt controller compatible strings for the AST2700 SoC: scu-ic0 to 3. This extends the MFD binding to support AST2700-based platforms. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250831021438.976893-3-ryan_chen@aspeedtech.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Rob Herring (Arm)
|
99e2f00cf4 |
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
Convert the aspeed,ast2x00-p2a-ctrl binding to DT schema format. The schema is simple enough to just add it to the parent aspeed,ast2x00-scu binding. Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/r/20250829230450.1496151-1-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Alexander Kurz
|
5872dcccc5 |
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
Add a buttons node and properties describing the "ONOFD" (MC13783) and "PWRON" (MC13892/MC34708) buttons available in the fsl,mc13xxx PMIC ICs. Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250829201517.15374-7-akurz@blala.de Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Alexander Kurz
|
1160f9f88b |
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
Convert the txt mc13xxx bindings to DT schema attempting to keep most information. The nodes codec and touchscreen are not part of the new schema since it was only briefly mentioned before. Following the convention, rename led-control to fsl,led-control. Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250829201517.15374-6-akurz@blala.de Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Janne Grunau
|
9b959e525f |
mfd: macsmc: Add "apple,t8103-smc" compatible
After discussion with the devicetree maintainers we agreed to not extend lists with the generic compatible "apple,smc" anymore [1]. Use "apple,t8103-smc" as base compatible as it is the SoC the driver and bindings were written for. [1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/ Signed-off-by: Janne Grunau <j@jannau.net> Link: https://lore.kernel.org/r/20250828-dt-apple-t6020-v1-18-507ba4c4b98e@jannau.net Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Bastien Curutchet
|
5f4bbee069 |
mfd: core: Increment of_node's refcount before linking it to the platform device
When an MFD device is added, a platform_device is allocated. If this device is linked to a DT description, the corresponding OF node is linked to the new platform device but the OF node's refcount isn't incremented. As of_node_put() is called during the platform device release, it leads to a refcount underflow. Call of_node_get() to increment the OF node's refcount when the node is linked to the newly created platform device. Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com> Link: https://lore.kernel.org/r/20250820-mfd-refcount-v1-1-6dcb5eb41756@bootlin.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Conor Dooley
|
8a498184e2 |
dt-bindings: mfd: syscon: Document the control-scb syscon on PolarFire SoC
The "control-scb" region, contains the "tvs" temperature and voltage sensors and the control/status registers for the system controller's mailbox. The mailbox has a dedicated node, so there's no need for a child node describing it, looking the syscon up by compatible is sufficient. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250901-shorten-yahoo-223aeaecd290@spud Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Alex Elder
|
6fc5d415c1 |
mfd: simple-mfd-i2c: Add SpacemiT P1 support
Enable support for the RTC and regulators found in the SpacemiT P1 PMIC. Support is implemented by the simple I2C MFD driver. The P1 PMIC is normally implemented with the SpacemiT K1 SoC. This PMIC provides 6 buck converters and 12 LDO regulators. It also implements a switch, watchdog timer, real-time clock, and more. Initially its RTC and regulators are supported. Signed-off-by: Alex Elder <elder@riscstar.com> Link: https://lore.kernel.org/r/20250825172057.163883-3-elder@riscstar.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Alex Elder
|
8566de1cf6 |
dt-bindings: mfd: Add support the SpacemiT P1 PMIC
Enable the SpacemiT P1, which is an I2C-controlled PMIC. Initially only the RTC and regulators will be supported. Signed-off-by: Alex Elder <elder@riscstar.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Acked-by: Troy Mitchell <troymitchell988@gmail.com> Link: https://lore.kernel.org/r/20250825172057.163883-2-elder@riscstar.com Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Michael Walle
|
a598ae45f4 |
dt-bindings: mfd: sl28cpld: Add sa67mcu compatible
The Kontron SMARC-sAM67 module features an on-board house keeping uC. It's designed to be compatible with the older on-board CPLD used on the SMARC-sAL28 board. To be prepared for any board specific quirks, add a specific compatible. Signed-off-by: Michael Walle <mwalle@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250822131531.1366437-3-mwalle@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Arnd Bergmann
|
eca0259e3b |
mfd: aat2870: Add GPIOLIB_LEGACY dependency
This driver uses the legacy gpiolib interfaces to get gpio numbers from platform data. There are no in-tree users of this driver, so nothing defines the platform data. Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build failure, and make sure the sound driver does not get built without the mfd portion either pass that dependency along. Alternatively, we could remove the mfd driver along with the backlight and regulator portions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250808151822.536879-15-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> |
||
|
Arnd Bergmann
|
e399d779c9 |
mfd: si476x: Add GPIOLIB_LEGACY dependency
This driver uses the legacy gpiolib interfaces to get gpio
numbers from platform data:
drivers/mfd/si476x-i2c.c: In function 'si476x_core_start':
drivers/mfd/si476x-i2c.c:133:21: error: implicit declaration of function 'gpio_is_valid'; did you mean 'uuid_is_valid'? [-Werror=implicit-function-declaration]
133 | if (gpio_is_valid(core->gpio_reset))
There are no in-tree users of this driver, so nothing defines
the platform data.
Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build
failure, and make sure the sound driver does not get built without the
mfd portion either pass that dependency along.
Alternatively, we could remove the mfd driver along with the radio and
sound portions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507231653.UFlH2dMO-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-14-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|