Referred in the documentation as the Software Timer Watchdog (SWT),
the s32g2 has 7 watchdogs. The number of watchdogs is designed to
allow dedicating one watchdog per Cortex-M7/A53 present on the SoC.
Add the SWT nodes in the device tree.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The platform has 8 CPUs, and the Linux STM timer driver is
instantiated per CPU. Enable 8 STM timers that can be used as
replacements for the ARM architected timers. The remaining STM timers
are not useful to the Linux kernel and provide no benefit, so they are
left disabled.
Enable STM0 to STM6 and STM8 on the s32g399a-rdb3 platform.
STM7 is skipped, as it differs slightly from the others and requires
an additional property to be properly handled by the driver.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The s32g3 has a STM module containing 12 timers. Each timer has a
dedicated interrupt and share the same clock.
Add the STM0->STM11 nodes for the s32g3 SoC. The STM7 node is not
added because it is slightly different and needs an extra property
which will be added later when supported by the driver.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the timers STM0 -> STM3 on the s32g274-rd2
The platform has 4 CPUs, and the Linux STM timer driver is
instantiated per CPU. Enable 4 STM timers that can be used as
replacements for the ARM architected timers. The remaining STM timers
are not useful to the Linux kernel and provide no benefit, so they are
left disabled.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The s32g2 has a STM module containing 8 timers. Each timer has a
dedicated interrupt and share the same clock.
Add the timers STM0->STM6 nodes for the s32g2 SoC. The STM7 node is
not added because it is slightly different and needs an extra property
which will be added later when supported by the driver.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the err irq info for edma2 and edma4. These two err irq are
connected to the GIC directly, not irqsteer.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add initial support for TQMLS1012AL module mounted on MBLS1012AL.
It supports UART1 for console, PCIe, I2C, USB, µSD card (default), SATA
and QSPI.
There is an alternative ordering option which provides an eMMC instead of
an SD card. This uses a different DT instead.
Due missing Packet Forwarding Engine (PFE) driver support, there is no
support for Ethernet so far.
Signed-off-by: Max Merchel <Max.Merchel@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The assignment of the USB ports is wrong and needs to be swapped.
The OTG (USB-C) port is on the first port and the host port with
the onboard hub is on the second port.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 2b52fd6035 ("arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The RTC INT ouptut is connected to a GPIO. Add the interrupt
so it can be used by the RTC driver.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The latest hardware revision uses GPIO_B_2 as reset for
the USB hub. Fix this and remove the pinctrl as we already
have this in the OSM-S devicetree.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hardware rev 3 changed a few signals. Reflect these changes in
the GPIO labels.
* digital IOs were moved to GPIO expander
* remove labels for unused signals
* add labels for TFT, CSI and USB hub IOs
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some new panels have the Sitronix touch instead of Goodix. Support them
by adding a node for the new controller. The bootloader needs to detect
the correct controller and enable/disable the nodes accordingly. To make
this easier add labels for both nodes.
Signed-off-by: Oualid Derouiche <oualid.derouiche@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For this IP the correct control of the CTS signal for transceiver direction
switching is difficult and - maybe also buggy - in the driver. Especially
the bootup requires special handling for most hardware implementations.
Therefore we simply use a GPIO now, which is fully under software control
and which is not problematic on bootup.
Signed-off-by: Eberhard Stoll <eberhard.stoll@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This regulator is not used anywhere and is not available in hardware.
Remove it.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is an addon for the BL i.MX8MM that features an LTE
modem, a TPM module, some LEDs and a pushbutton.
Signed-off-by: Annette Kobou <annette.kobou@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The wm8524 codec is connected to the SAI interface. There are two audio
plls on i.MX8MN, one pll can be the clock source of 44kHz series rates,
another pll can be clock source of 48kHz series rates.
Previously it only supported 48kHz series rates, with this change the
supported rates will include 44kHz series rates, from 8kHz to 192kHz.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The wm8524 codec is connected to the SAI interface. There are two audio
plls on i.MX8MQ, one pll can be the clock source of 44kHz series rates,
another pll can be clock source of 48kHz series rates.
Previously it only supported 48kHz series rates, with this change the
supported rates will include 44kHz series rates, from 8kHz to 192kHz.
As commit 17cc308b18 ("ASoC: wm8524: enable constraints when sysclk is
configured.") make wm8524 release the constraint when codec's sysclk is
not configured, so configure the cpu dai's sysclk to support more rates
with the 'clocks' property removed.
Add mclk-fs property for the sysclk ratio, which is required by
calculating the sysclk, 256 is a common ratio for audio.
'system-clock-direction-out' is a required property after
commit 5725bce709 ("ASoC: simple-card-utils: Unify clock direction by
clk_direction") to specify the clock direction.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The wm8524 codec is connected to the SAI interface. There are two audio
plls on i.MX8MM, one pll can be the clock source of 44kHz series rates,
another pll can be clock source of 48kHz series rates.
Previously it only supported 48kHz series rates, with this change the
supported rates will include 44kHz series rates, from 8kHz to 192kHz.
As commit 17cc308b18 ("ASoC: wm8524: enable constraints when sysclk is
configured.") make wm8524 release the constraint when codec's sysclk is
not configured, so configure the cpu dai's sysclk to support more rates
with the 'clocks' property removed.
Add mclk-fs property for the sysclk ratio, which is required by
calculating the sysclk, 256 is a common ratio for audio.
'system-clock-direction-out' is a required property after
commit 5725bce709 ("ASoC: simple-card-utils: Unify clock direction by
clk_direction") to specify the clock direction.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DTS for the i.MX8ULP EVK9 board. Some notable differences from the
i.MX8ULP EVK board include:
1) M.2 header uses SAI6 instead of SAI5.
2) Ethernet transceiver chip (KSZ8081RNB) uses different pads.
3) USB0 ID/OC signals are tied to different pads.
4) USB1 ID/OC signals are tied to different pads.
5) EVK9 board integrates the 9.4x9.4mm SoC package, while the EVK board
integrates the 15x15mm package.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is a current sensing circuitry on the phyBOARD-Nash-i.MX93 capable
of measuring input current consumption of the phyCORE-i.MX93 SoM @ 3.3V.
Circuity consists of MAX4372 current-sense amplifier (50V/V) with two 70
mOhm shunts resistors in parallel configuration (effective R = 35 mOhm)
connected to the SoC internal 12-bit ADC channel #1 (Vref = 1.8V) via
voltage divider with ratio of 1/2. This results in a current scaling
factor of 0.502232142 mA/LSB.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add initial device tree support for the Ultratronik Ultra-MACH SBC
based on the NXP i.MX8M Plus SoC with 2GB LPDDR4.
The board features:
- 1 x USB 2.0 Host
- 1 x USB 2.0 via USB-C
- Debug UART + 1 x UART + 1 x USART
- SD card and eMMC support
- 2 x Ethernet (RJ45)
- HDMI
This initial DTS enables basic board support for booting via
SD card or eMMC.
Signed-off-by: Goran Rađenović <goran.radni@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8MP-based Ultra-MACH SBC is supported by Ultratronik, and its
device tree has been added under arch/arm64/boot/dts/freescale/.
To ensure proper maintainer coverage and notification of relevant
changes, add the imx8mp-ultra-mach-sbc.dts file to the existing
ULTRATRONIK BOARD SUPPORT section.
This follows the established pattern already used for the STM32MP157C-
based Ultra-FLY SBC.
Signed-off-by: Goran Rađenović <goran.radni@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the datasheet the phy needs to be held in reset until the
reference clock got stable. Even though no issue was observed, fix this
as the software should always comply with the specification.
Use gpio4 23, which is connected to the phy reset pin. On the same pin
RX_ER was used before, but this signal is optional and can be dropped.
Note: This comes into effect with the phyCOREs SOM hardware revision 4.
In revisions before, this gpio is not connected, and the phy reset is
managed with the global hardware reset circuit.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
-----BEGIN PGP SIGNATURE-----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=1iYa
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"tools/power turbostat: version 2025.09.09
- Probe and display L3 Cache topology
- Add ability to average an added counter (useful for pre-integrated
"counters", such as Watts)
- Break the limit of 64 built-in counters
- Assorted bug fixes and minor feature tweaks"
* tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.09.09
tools/power turbostat: Handle non-root legacy-uncore sysfs permissions
tools/power turbostat: standardize PER_THREAD_PARAMS
tools/power turbostat: Fix DMR support
tools/power turbostat: add format "average" for external attributes
tools/power turbostat: delete GET_PKG()
tools/power turbostat: probe and display L3 cache topology
tools/power turbostat: Support more than 64 built-in-counters
tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns
tools/power turbostat: Fix bogus SysWatt for forked program
tools/power turbostat: Handle cap_get_proc() ENOSYS
tools/power turbostat: Fix build with musl
tools/power turbostat: verify arguments to params --show and --hide
tools/power turbostat: regression fix: --show C1E%
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
-----BEGIN PGP SIGNATURE-----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=VUGL
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmiXjqoACgkQEsHwGGHe
VUrD0Q/9FPOeQ6sNazmk4oC0d7BrgTmjiSR9yHsgbHzLRilx7ncBNLS1DAwVBKNS
JPpHUEWdIjY7cURYFxihSPvjG1d+yCoKHkn/HlGXpVNm2bfN8M5ejlqd/yskGwa1
9eNzPCB08+dD0zJhEq6teDn5cAGqeLmdiQa+h3UZ6Wt5BOGv2NAMpF8cgObGC6le
2ednA+lHPlQdIIJCH+HmmHIvVHXAGiuisfdD6eVtec28LU+V/vNPkGnmss616dui
48O2+FPaBnN+0tlNmn/bdisjAUWpYPYA9sto2tk/wKXZM+OW5rIlB/NhzDvvjd1c
1kHX05bzH9aKIQQ4d+UUTnnlqY/biG80UWg1BPgJzW/ko6rtdVP8kZ5xQXQsEJ15
gihYMdcyb3TwDxXkEqWVH0INmAmIC0daCvrDgiXcyOlPPoBdh9IYE0YxMAY+GSF0
RN55ZSMc0l2p6qL70WeWau5JJCplNjT6YyfOX8PeTRpkpoZIUlNVZyJcItaJMVbf
cbi1SE9TRzoHgenDOBZZVQX54X1FlZg6WupHEoN8amIBEh6rw3E6biKmQDcXLa8n
9tex9t7OgyFcn8iLFrUVxzssQi+2+kt6tvTeJds4qG4U4dvWm8o1z4Lja3WkQCp2
6It8J2PS1KJYVfffJz0SXFex9SKImsgBCSLn/U6qNJF9mAUG9/4=
=pdid
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
-----BEGIN PGP SIGNATURE-----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=Xpyt
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Prevent a futex hash leak due to different mm lifetimes
* tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Move futex cleanup to __mmdrop()
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
Signed-off-by: Len Brown <len.brown@intel.com>
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Original-patch-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59d ("tools/power turbostat: Add initial support for DMR")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
External atributes with format "raw" are not printed in summary lines
for nodes/packages (or with option -S). The new format "average"
behaves like "raw" but also adds the summary data
Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We have out-grown the ability to use a 64-bit memory location
to inventory every possible built-in counter.
Leverage the the CPU_SET(3) macros to break this barrier.
Also, break the Joules & Watts counters into two,
since we can no longer 'or' them together...
Signed-off-by: Len Brown <len.brown@intel.com>
Here is a single revert of one of the previous patches that went in the
last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.) It accidentially changed
the ioctl values of some tty ioctls, which breaks xorg.
The revert has been in linux-next all this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaJdfkg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymq2QCgxaxTJGciGevsEi3rcXw+TkS0dq4AniOTgmCb
cLQx6kIGVCucA1dOxWr8
=Vzw4
-----END PGP SIGNATURE-----
Merge tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY fix from Greg KH:
"Here is a single revert of one of the previous patches that went in
the last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.)
It accidentially changed the ioctl values of some tty ioctls, which
breaks xorg.
The revert has been in linux-next all this week with no reported
issues"
* tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: vt: use _IO() to define ioctl numbers"
- Expose the OVMF firmware debug log via sysfs
- Lower the default log level for the EFI stub to avoid corrupting any
splash screens with unimportant diagnostic output
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCaJbnoAAKCRAwbglWLn0t
XIhuAQDB+qEzM0nBPRVnlztrjKDbxu01jzFgCuf4egFePs4OjwD/dgNCXXudn5JB
X7VWNi8VQAWBMhijpEKXvDu6f0MXFgw=
=UeGX
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Expose the OVMF firmware debug log via sysfs
- Lower the default log level for the EFI stub to avoid corrupting any
splash screens with unimportant diagnostic output
* tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: add API doc entry for ovmf_debug_log
efistub: Lower default log level
efi: add ovmf debug log driver
-----BEGIN PGP SIGNATURE-----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=EQ7g
-----END PGP SIGNATURE-----
Merge tag 'block-6.17-20250808' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
-----BEGIN PGP SIGNATURE-----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=LCD/
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Allow vectorized payloads for send/send-zc - like sendmsg, but
without the hassle of a msghdr.
- Fix for an integer wrap that should go to stable, spotted by syzbot.
Nothing alarming here, as you need to be root to hit this.
Nevertheless, it should get fixed.
FWIW, kudos to the syzbot crew for having much nicer reproducers now,
and with nicely annotated source code as well. This is particularly
useful as syzbot uses the raw interface rather than liburing,
historically it's been difficult to turn a syzbot reproducer into a
meaningful test case. With the recent changes, not true anymore!
* tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux:
io_uring/memmap: cast nr_pages to size_t before shifting
io_uring/net: Allow to do vectorized send
There's one fix here for an issue with the CS42L43 where we were
allocating a single property for client devices as just that property
rather than a terminated array of properties like we are supposed to.
We also have an update to the MAINTAINERS file for some Renesas devices.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiV8hQACgkQJNaLcl1U
h9DTGQf/ZU+UjQPEAYE5oFngQQzllOEb72io3QtfMXKGjZmEJGmm50vZP1h2psWv
CwFmzxzN/g3b2FsPmXGLRRtwSvnH9cPxu3gXxM5VMBppeGyTt9j/St0clvzozL8J
vOnYYt5AtPCDyxCNNwGg1H9AMEAEpzE2vk1LLA3lfLGen7R2f9nRrwbyMoMeCTRu
pyZngxtLfk8GOrVZR8KoRUqs3ugFMLblRXElXkyAGPtyP0RZ5eDXMP5IDG1ymGxt
a0zwRu0XBmgskVACMhFhPPNa7o4t2vHXZCmQ2cFE3e3j1lDgd9JSRbfXnBDl+i4v
cTx4u+DMqILdZlaWhqrDz1oeSpXtVA==
=iOoB
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's one fix here for an issue with the CS42L43 where we were
allocating a single property for client devices as just that property
rather than a terminated array of properties like we are supposed to.
We also have an update to the MAINTAINERS file for some Renesas
devices"
* tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Property entry should be a null-terminated array
MAINTAINERS: Add entries for the RZ/V2H(P) RSPI
This fixes an issue with the newly added code for handling large voltage
changes on regulators which require that individual voltage changes
cover a limited range, the check for convergence was broken.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiV71cACgkQJNaLcl1U
h9BT/wf/RFUziTbJP13+I+Ce+BixwFOfTJ2+aE2xlCWAd8eyylxdOvZwRaxiiU8K
2o8mfyVpGitROyEgsuXDqiel1hFTSVpuFzT8NhGe9tc5RC+UtF1nuygsMvPAuUlR
cyrGF4aUSsEGr5R37lZh6dC/kJDHOxoQy+YEk9ngnnfWlddpHJsQMulWU3MIVAaG
IZ3KVQeZeEpCNkgKr50IG/TQh9bX8Dct/EPSxKhR4EjaKXvEyKcrMnbQpb7h7dxN
dUFpKk99EKpC6uI7jLIwUgIA4CCN8h2g0+B10zo4Kp2AQLltGs/H/gZJSCzKzEv8
3UTeyBz8Uzr4srsKRBiP8woqA6hjoA==
=xTjP
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"This fixes an issue with the newly added code for handling large
voltage changes on regulators which require that individual voltage
changes cover a limited range, the check for convergence was broken"
* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: correct convergence check in regulator_set_voltage()
These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow buses
so devices don't get nested), plus add a missing mutex free which I
noticed while implementing a fix for that issue.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiV7wUACgkQJNaLcl1U
h9DgbAf+O3VBljLbtjoJGP25dWZcmFNkVyDu6Bq2rFeIrDKxhZT3048MraxFw1if
uo+YeAuOAziDFMPqBhUvtbNIeFDg1rSzqOGhQ4NdAFHQjN8ZcwxrVzp/hXJiFMTf
jAhonhUWOeerxtu5ThT12060FwX/pD/M+aV2Q6zLI44pUXw/WH7J90B0CAi76ok4
9V1NWybkCh8BUX98ePuqlut/p+1Iq8PixpoxaOdLLd3OxoRy++fjhvNjaSo65NGR
C9L6Rmv46ter4LCkfHlYz+VEDQg6ahdCexSNknzncH6OV9ZYV0/SVysqrlpqOALz
CUbOeXIQ9nV9PwOeQqKGgaqbxbfxhg==
=G3M7
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow
buses so devices don't get nested), plus add a missing mutex free
which I noticed while implementing a fix for that issue"
* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
regmap: irq: Free the regmap-irq mutex
