mirror of
https://github.com/torvalds/linux.git
synced 2026-08-01 12:11:59 +02:00
arm64: dts: ls1012a: add DTS for TQMLS1012al module with MBLS1012AL board
Add initial support for TQMLS1012AL module mounted on MBLS1012AL. It supports UART1 for console, PCIe, I2C, USB, µSD card (default), SATA and QSPI. There is an alternative ordering option which provides an eMMC instead of an SD card. This uses a different DT instead. Due missing Packet Forwarding Engine (PFE) driver support, there is no support for Ethernet so far. Signed-off-by: Max Merchel <Max.Merchel@tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Matthias Schiffer
Shawn Guo
parent
c94737568b
commit
db48d7b37e
|
|
@ -5,6 +5,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
|
|||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
|
||||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,23 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
|
||||
* D-82229 Seefeld, Germany.
|
||||
* Author: Matthias Schiffer
|
||||
* Author: Max Merchel
|
||||
*/
|
||||
|
||||
#include "fsl-ls1012a-tqmls1012al-mbls1012al.dts"
|
||||
|
||||
&esdhc0 {
|
||||
vqmmc-supply = <®_1v8>;
|
||||
/delete-property/ no-mmc;
|
||||
/delete-property/ sd-uhs-sdr12;
|
||||
/delete-property/ sd-uhs-sdr25;
|
||||
/delete-property/ sd-uhs-sdr50;
|
||||
/delete-property/ sd-uhs-sdr104;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
no-sd;
|
||||
voltage-ranges = <1800 1800>;
|
||||
non-removable;
|
||||
};
|
||||
|
|
@ -0,0 +1,366 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
|
||||
* D-82229 Seefeld, Germany.
|
||||
* Author: Matthias Schiffer
|
||||
* Author: Max Merchel
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
#include "fsl-ls1012a-tqmls1012al.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TQ-Systems TQMLS1012AL on MBLS1012AL";
|
||||
compatible = "tq,ls1012a-tqmls1012al-mbls1012al", "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
|
||||
chassis-type = "embedded";
|
||||
|
||||
aliases {
|
||||
/* use MAC from U-Boot environment */
|
||||
/* TODO: PFE */
|
||||
ethernet2 = &swport0;
|
||||
ethernet3 = &swport1;
|
||||
ethernet4 = &swport2;
|
||||
ethernet5 = &swport3;
|
||||
serial0 = &duart0;
|
||||
spi0 = &qspi;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &duart0;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
|
||||
switch-1 {
|
||||
label = "S2";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio_exp_3p3v 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
switch-2 {
|
||||
label = "X15";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio_exp_1p8v 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
switch-3 {
|
||||
label = "X16";
|
||||
linux,code = <BTN_2>;
|
||||
gpios = <&gpio_exp_1p8v 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio_exp_3p3v 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio_exp_3p3v 15 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
/* global autoconfigured region for contiguous allocations */
|
||||
linux,cma {
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
/* 64 MiB */
|
||||
size = <0 0x04000000>;
|
||||
/* 512 - 128 MiB, our minimum RAM config will be 512 MiB */
|
||||
alloc-ranges = <0 0x80000000 0 0x98000000>;
|
||||
linux,cma-default;
|
||||
};
|
||||
};
|
||||
|
||||
reg_1v5: regulator-1v5 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_1V5";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_1p5v_pcie: regulator-1p5v-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_1V5_PCIE";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio_exp_1p8v 7 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <®_1v5>;
|
||||
};
|
||||
|
||||
reg_1p5v_wlan: regulator-1p5v-wlan {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_1V5_WLAN";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio_exp_1p8v 6 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <®_1v5>;
|
||||
};
|
||||
|
||||
reg_1v8: regulator-1p8v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3v3: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3v3_pcie: regulator-3v3-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_3V3_PCIE";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio_exp_3p3v 3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <®_3v3>;
|
||||
};
|
||||
|
||||
reg_3v3_wlan: regulator-3v3-wlan {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "V_3V3_WLAN";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio_exp_3p3v 1 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
vin-supply = <®_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
&duart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&esdhc0 {
|
||||
vmmc-supply = <®_3v3>;
|
||||
no-mmc;
|
||||
no-sdio;
|
||||
disable-wp;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
gpio_exp_3p3v: gpio@20 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
vcc-supply = <®_3v3>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
gpio-line-names = "", "", "GPIO_3V3_3", "",
|
||||
"", "", "", "",
|
||||
"", "GPIO_3V3_1", "GPIO_3V3_2", "",
|
||||
"", "", "", "";
|
||||
|
||||
wlan-disable-hog {
|
||||
gpio-hog;
|
||||
gpios = <0 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "WLAN_DISABLE#";
|
||||
};
|
||||
|
||||
pcie-rst-hog {
|
||||
gpio-hog;
|
||||
gpios = <4 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "PCIE_RST#";
|
||||
};
|
||||
|
||||
wlan-rst-hog {
|
||||
gpio-hog;
|
||||
gpios = <5 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "WLAN_RST#";
|
||||
};
|
||||
|
||||
pcie-dis-hog {
|
||||
gpio-hog;
|
||||
gpios = <11 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "PCIE_DIS#";
|
||||
};
|
||||
|
||||
pcie-wake-hog {
|
||||
gpio-hog;
|
||||
gpios = <12 GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "PCIE_WAKE#";
|
||||
};
|
||||
};
|
||||
|
||||
lm75_48: temperature-sensor@48 {
|
||||
compatible = "national,lm75a";
|
||||
reg = <0x48>;
|
||||
vs-supply = <®_3v3>;
|
||||
};
|
||||
|
||||
switch@5f {
|
||||
compatible = "microchip,ksz9897";
|
||||
reg = <0x5f>;
|
||||
reset-gpios = <&gpio_exp_3p3v 7 GPIO_ACTIVE_LOW>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
swport0: port@0 {
|
||||
reg = <0>;
|
||||
label = "swp0";
|
||||
phy-mode = "internal";
|
||||
};
|
||||
|
||||
swport1: port@1 {
|
||||
reg = <1>;
|
||||
label = "swp1";
|
||||
phy-mode = "internal";
|
||||
};
|
||||
|
||||
swport2: port@2 {
|
||||
reg = <2>;
|
||||
label = "swp2";
|
||||
phy-mode = "internal";
|
||||
};
|
||||
|
||||
swport3: port@3 {
|
||||
reg = <3>;
|
||||
label = "swp3";
|
||||
phy-mode = "internal";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
/* TODO: PFE */
|
||||
phy-mode = "rgmii-id";
|
||||
rx-internal-delay-ps = <1500>;
|
||||
tx-internal-delay-ps = <1500>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio_exp_1p8v: gpio@70 {
|
||||
compatible = "nxp,pca9538";
|
||||
reg = <0x70>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
vcc-supply = <®_1v8>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
gpio-line-names = "PCIE_CLK_PD#", "PMIC_INT#", "ETH_SW_INT#", "",
|
||||
"", "", "", "",
|
||||
"", "GPIO_3V3_1", "GPIO_3V3_2", "",
|
||||
"", "", "", "";
|
||||
|
||||
/* do not change PCIE_CLK_PD */
|
||||
pcie-clk-pd-hog {
|
||||
gpio-hog;
|
||||
gpios = <0 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "PCIE_CLK_PD#";
|
||||
};
|
||||
|
||||
pmic-int-hog {
|
||||
gpio-hog;
|
||||
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "PMIC_INT#";
|
||||
};
|
||||
|
||||
eth-sw-int-hog {
|
||||
gpio-hog;
|
||||
gpios = <2 GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "ETH_SW_INT#";
|
||||
};
|
||||
|
||||
eth-link-pwrdwn-hog {
|
||||
gpio-hog;
|
||||
gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "ETH_LINK_PWRDWN#";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* TODO: PFE */
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hub_2_0: hub@1 {
|
||||
compatible = "usb451,8142";
|
||||
reg = <1>;
|
||||
peer-hub = <&hub_3_0>;
|
||||
reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
|
||||
vdd-supply = <®_vcc_3v3>;
|
||||
};
|
||||
|
||||
hub_3_0: hub@2 {
|
||||
compatible = "usb451,8140";
|
||||
reg = <2>;
|
||||
peer-hub = <&hub_2_0>;
|
||||
reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
|
||||
vdd-supply = <®_vcc_3v3>;
|
||||
};
|
||||
};
|
||||
81
arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
Normal file
81
arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
Normal file
|
|
@ -0,0 +1,81 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
|
||||
* D-82229 Seefeld, Germany.
|
||||
* Author: Matthias Schiffer
|
||||
* Author: Max Merchel
|
||||
*/
|
||||
|
||||
#include "fsl-ls1012a.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
/* our minimum RAM config will be 512 MiB */
|
||||
reg = <0x00000000 0x80000000 0 0x20000000>;
|
||||
};
|
||||
|
||||
reg_vcc_1v8: regulator-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
reg_vcc_3v3: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
jc42_19: temperature-sensor@19 {
|
||||
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
|
||||
reg = <0x19>;
|
||||
};
|
||||
|
||||
m24c64_50: eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
pagesize = <32>;
|
||||
vcc-supply = <®_vcc_3v3>;
|
||||
};
|
||||
|
||||
m24c02_51: eeprom@51 {
|
||||
compatible = "nxp,se97b", "atmel,24c02";
|
||||
reg = <0x51>;
|
||||
pagesize = <16>;
|
||||
read-only;
|
||||
vcc-supply = <®_vcc_3v3>;
|
||||
};
|
||||
|
||||
rtc1: rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <39000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
vcc-supply = <®_vcc_1v8>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user