As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is
used.
Fixes: 3c68198e75 ("sctp: Make hmac algorithm selection for cookie generation dynamic")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-4-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in the previous commit, using the 'net' structure via
'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'pernet' structure can be obtained from the table->data using
container_of().
Fixes: 27069e7cb3 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-3-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'net.mptcp.available_schedulers' sysctl knob is there to list available
schedulers, not to modify this list.
There are then no reasons to give write access to it.
Nothing would have been written anyway, but no errors would have been
returned, which is unexpected.
Fixes: 73c900aa36 ("mptcp: add net.mptcp.available_schedulers")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-1-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have not seen emails or tags from Lars in almost 4 years.
Steen and Daniel are pretty active, but the review coverage
isn't stellar (35% of changes go in without a review tag).
Subsystem ARM/Microchip Sparx5 SoC support
Changes 28 / 79 (35%)
Last activity: 2024-11-24
Lars Povlsen <lars.povlsen@microchip.com>:
Steen Hegelund <Steen.Hegelund@microchip.com>:
Tags 6c7c4b91aa 2024-04-08 00:00:00 15
Daniel Machon <daniel.machon@microchip.com>:
Author 48ba00da2e 2024-04-09 00:00:00 2
Tags f164b29663 2024-11-24 00:00:00 6
Top reviewers:
[7]: horms@kernel.org
[1]: jacob.e.keller@intel.com
[1]: jensemil.schulzostergaard@microchip.com
[1]: horatiu.vultur@microchip.com
INACTIVE MAINTAINER Lars Povlsen <lars.povlsen@microchip.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250108155242.2575530-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Noam Dagan was added to ENA reviewers in 2021, we have not seen
a single email from this person to any list, ever (according to lore).
Git history mentions the name in 2 SoB tags from 2020.
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://patch.msgid.link/20250108155242.2575530-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a steady stream of fixes for TIPC, even tho the development
has slowed down a lot. Over last 2 years we have merged almost 70
TIPC patches, but we haven't heard from Ying Xue once:
Subsystem TIPC NETWORK LAYER
Changes 42 / 69 (60%)
Last activity: 2023-10-04
Jon Maloy <jmaloy@redhat.com>:
Tags 08e50cf071 2023-10-04 00:00:00 6
Ying Xue <ying.xue@windriver.com>:
Top reviewers:
[9]: horms@kernel.org
[8]: tung.q.nguyen@dektech.com.au
[4]: jiri@nvidia.com
[3]: tung.q.nguyen@endava.com
[2]: kuniyu@amazon.com
INACTIVE MAINTAINER Ying Xue <ying.xue@windriver.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108155242.2575530-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mailing lists have seen no email from Mark Lee in the last 4 years.
gitdm missingmaints says:
Subsystem MEDIATEK ETHERNET DRIVER
Changes 103 / 400 (25%)
Last activity: 2024-12-19
Felix Fietkau <nbd@nbd.name>:
Author 88806efc03 2024-10-17 00:00:00 44
Tags 88806efc03 2024-10-17 00:00:00 51
Sean Wang <sean.wang@mediatek.com>:
Tags a5d7553829 2020-04-07 00:00:00 1
Mark Lee <Mark-MC.Lee@mediatek.com>:
Lorenzo Bianconi <lorenzo@kernel.org>:
Author 0c7469ee71 2024-12-19 00:00:00 123
Tags 0c7469ee71 2024-12-19 00:00:00 139
Top reviewers:
[32]: horms@kernel.org
[15]: leonro@nvidia.com
[9]: andrew@lunn.ch
INACTIVE MAINTAINER Mark Lee <Mark-MC.Lee@mediatek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108155242.2575530-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I tried a couple of things to reinvigorate the stmmac maintainers
over the last few years but with little effect. The maintainers
are not active, let the MAINTAINERS file reflect reality.
The Synopsys IP this driver supports is very popular we need
a solid maintainer to deal with the complexity of the driver.
gitdm missingmaints says:
Subsystem STMMAC ETHERNET DRIVER
Changes 344 / 978 (35%)
Last activity: 2020-05-01
Alexandre Torgue <alexandre.torgue@foss.st.com>:
Tags 1bb694e208 2020-05-01 00:00:00 1
Jose Abreu <joabreu@synopsys.com>:
Top reviewers:
[75]: horms@kernel.org
[49]: andrew@lunn.ch
[46]: fancer.lancer@gmail.com
INACTIVE MAINTAINER Jose Abreu <joabreu@synopsys.com>
Acked-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://patch.msgid.link/20250108155242.2575530-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andy does not participate much in bonding reviews, unfortunately.
Move him to CREDITS.
gitdm missingmaint says:
Subsystem BONDING DRIVER
Changes 149 / 336 (44%)
Last activity: 2024-09-05
Jay Vosburgh <jv@jvosburgh.net>:
Tags 68db604e16 2024-09-05 00:00:00 8
Andy Gospodarek <andy@greyhouse.net>:
Top reviewers:
[65]: jay.vosburgh@canonical.com
[23]: liuhangbin@gmail.com
[16]: razor@blackwall.org
INACTIVE MAINTAINER Andy Gospodarek <andy@greyhouse.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250108155242.2575530-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Woojung Huh seems to have only replied to the list 35 times
in the last 5 years, and didn't provide any reviews in 3 years.
The LAN78XX driver has seen quite a bit of activity lately.
gitdm missingmaints says:
Subsystem USB LAN78XX ETHERNET DRIVER
Changes 35 / 91 (38%)
(No activity)
Top reviewers:
[23]: andrew@lunn.ch
[3]: horms@kernel.org
[2]: mateusz.polchlopek@intel.com
INACTIVE MAINTAINER Woojung Huh <woojung.huh@microchip.com>
Move Woojung to CREDITS and add new maintainers who are more
likely to review LAN78xx patches.
Acked-by: Woojung Huh <woojung.huh@microchip.com>
Acked-by: Rengarajan Sundararajan <rengarajan.s@microchip.com>
Link: https://patch.msgid.link/20250108155242.2575530-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's not much review support from Jose, there is a sharp
drop in his participation around 4 years ago.
The DW XPCS IP is very popular and the driver requires active
maintenance.
gitdm missingmaints says:
Subsystem SYNOPSYS DESIGNWARE ETHERNET XPCS DRIVER
Changes 33 / 94 (35%)
(No activity)
Top reviewers:
[16]: andrew@lunn.ch
[12]: vladimir.oltean@nxp.com
[2]: f.fainelli@gmail.com
INACTIVE MAINTAINER Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108155242.2575530-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pci_irq_vector() function never returns zero. It returns negative
error codes or a positive non-zero IRQ number. Fix the error checking to
test for negatives.
Fixes: a36e9f5cfe ("rtase: Add support for a pci table in this module")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/f2ecc88d-af13-4651-9820-7cc665230019@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Even though we fixed a logic error in the commit cited below, syzbot
still managed to trigger an underflow of the per-host bulk flow
counters, leading to an out of bounds memory access.
To avoid any such logic errors causing out of bounds memory accesses,
this commit factors out all accesses to the per-host bulk flow counters
to a series of helpers that perform bounds-checking before any
increments and decrements. This also has the benefit of improving
readability by moving the conditional checks for the flow mode into
these helpers, instead of having them spread out throughout the
code (which was the cause of the original logic error).
As part of this change, the flow quantum calculation is consolidated
into a helper function, which means that the dithering applied to the
ost load scaling is now applied both in the DRR rotation and when a
sparse flow's quantum is first initiated. The only user-visible effect
of this is that the maximum packet size that can be sent while a flow
stays sparse will now vary with +/- one byte in some cases. This should
not make a noticeable difference in practice, and thus it's not worth
complicating the code to preserve the old behaviour.
Fixes: 546ea84d07 ("sched: sch_cake: fix bulk flow accounting logic for host fairness")
Reported-by: syzbot+f63600d288bfb7057424@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Link: https://patch.msgid.link/20250107120105.70685-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We found a timeout problem with the pldm command on our system. The
reason is that the MCTP-I3C driver has a race condition when receiving
multiple-packet messages in multi-thread, resulting in a wrong packet
order problem.
We identified this problem by adding a debug message to the
mctp_i3c_read function.
According to the MCTP spec, a multiple-packet message must be composed
in sequence, and if there is a wrong sequence, the whole message will be
discarded and wait for the next SOM.
For example, SOM → Pkt Seq #2 → Pkt Seq #1 → Pkt Seq #3 → EOM.
Therefore, we try to solve this problem by adding a mutex to the
mctp_i3c_read function. Before the modification, when a command
requesting a multiple-packet message response is sent consecutively, an
error usually occurs within 100 loops. After the mutex, it can go
through 40000 loops without any error, and it seems to run well.
Fixes: c8755b29b5 ("mctp i3c: MCTP I3C driver")
Signed-off-by: Leo Yang <Leo-Yang@quantatw.com>
Link: https://patch.msgid.link/20250107031529.3296094-1-Leo-Yang@quantatw.com
[pabeni@redhat.com: dropped already answered question from changelog]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The documentation contained an unusual character due to an issue in my
personal b4 setup. Fix the problem by providing the correct PSE Pinout
Alternatives table number description.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250107142659.425877-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-01-07 (ice, igc)
For ice:
Arkadiusz corrects mask value being used to determine DPLL phase range.
Przemyslaw corrects frequency value for E823 devices.
For igc:
En-Wei Wu adds a check and, early, return for failed register read.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: return early when failing to read EECD register
ice: fix incorrect PHY settings for 100 GB/s
ice: fix max values for dpll pin phase adjust
====================
Link: https://patch.msgid.link/20250107190150.1758577-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- btmtk: Fix failed to send func ctrl for MediaTek devices.
- hci_sync: Fix not setting Random Address when required
- MGMT: Fix Add Device to responding before completing
- btnxpuart: Fix driver sending truncated data
-----BEGIN PGP SIGNATURE-----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=8VPB
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btmtk: Fix failed to send func ctrl for MediaTek devices.
- hci_sync: Fix not setting Random Address when required
- MGMT: Fix Add Device to responding before completing
- btnxpuart: Fix driver sending truncated data
* tag 'for-net-2025-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btmtk: Fix failed to send func ctrl for MediaTek devices.
Bluetooth: btnxpuart: Fix driver sending truncated data
Bluetooth: MGMT: Fix Add Device to responding before completing
Bluetooth: hci_sync: Fix not setting Random Address when required
====================
Link: https://patch.msgid.link/20250108162627.1623760-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.
The error message:
Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
hclge_fetch_pf_reg+0x138/0x250 [hclge]
hclge_get_regs+0x84/0x1d0 [hclge]
hns3_get_regs+0x2c/0x50 [hns3]
ethtool_get_regs+0xf4/0x270
dev_ethtool+0x674/0x8a0
dev_ioctl+0x270/0x36c
sock_do_ioctl+0x110/0x2a0
sock_ioctl+0x2ac/0x530
__arm64_sys_ioctl+0xa8/0x100
invoke_syscall+0x4c/0x124
el0_svc_common.constprop.0+0x140/0x15c
do_el0_svc+0x30/0xd0
el0_svc+0x1c/0x2c
el0_sync_handler+0xb0/0xb4
el0_sync+0x168/0x180
Fixes: 939ccd107f ("net: hns3: move dump regs function to a separate file")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.
Fixes: ff200099d2 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the
user process is called next time, save_buf is used to copy the cached
data to the user space. As a result, the queried data is stale.
To solve this problem, this patch implements .open() and .release() handler
for debugfs file_operations. moving allocation buffer and execution
of the cmd to the .open() handler and freeing in to the .release() handler.
Allocate separate buffer for each reader and associate the buffer
with the file pointer.
When different user read processes no longer share the buffer,
the stale data problem is fixed.
Fixes: 5e69ea7ee2 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.
Fixes: 2a7556bb2b ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.
The error message:
hns3 0000:39:01.0: cmd failed -16
hns3 0000:39:01.0: hclge device re-init failed, VF is disabled!
hns3 0000:39:01.0: failed to reset VF stack
hns3 0000:39:01.0: failed to reset VF(4)
hns3 0000:39:01.0: prepare reset(2) wait done
hns3 0000:39:01.0 eth4: already uninitialized
Use the crash tool to view struct hclgevf_dev:
struct hclgevf_dev {
...
default_reset_request = 0x20,
reset_level = HNAE3_NONE_RESET,
reset_pending = 0x100,
reset_type = HNAE3_NONE_RESET,
...
};
Fixes: 720bd5837e ("net: hns3: add set_default_reset_request in the hnae3_ae_ops")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250106143642.539698-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a follow-up to 3c5b4d69c3 ("net: annotate data-races around
sk->sk_mark"). sk->sk_mark can be read and written without holding
the socket lock. IPv6 equivalent is already covered with READ_ONCE()
annotation in tcp_v6_send_response().
Fixes: 3c5b4d69c3 ("net: annotate data-races around sk->sk_mark")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/f459d1fc44f205e13f6d8bdca2c8bfb9902ffac9.1736244569.git.daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NAPI IDs were not fully exposed to user space prior to the netlink
API, so they were never namespaced. The netlink API must ensure that
at the very least NAPI instance belongs to the same netns as the owner
of the genl sock.
napi_by_id() can become static now, but it needs to move because of
dev_get_by_napi_id().
Cc: stable@vger.kernel.org
Fixes: 1287c1ae0f ("netdev-genl: Support setting per-NAPI config values")
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250106180137.1861472-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use usb_autopm_get_interface() and usb_autopm_put_interface()
in btmtk_usb_shutdown(), it could send func ctrl after enabling
autosuspend.
Bluetooth: btmtk_usb_hci_wmt_sync() hci0: Execution of wmt command
timed out
Bluetooth: btmtk_usb_shutdown() hci0: Failed to send wmt func ctrl
(-110)
Fixes: 5c5e8c52e3 ("Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c")
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.
Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.
Fixes: 689ca16e52 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Device with LE type requires updating resolving/accept list which
requires quite a number of commands to complete and each of them may
fail, so instead of pretending it would always work this checks the
return of hci_update_passive_scan_sync which indicates if everything
worked as intended.
Fixes: e8907f7654 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes errors such as the following when Own address type is set to
Random Address but it has not been programmed yet due to either be
advertising or connecting:
< HCI Command: LE Set Exte.. (0x08|0x0041) plen 13
Own address type: Random (0x03)
Filter policy: Ignore not in accept list (0x01)
PHYs: 0x05
Entry 0: LE 1M
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Entry 1: LE Coded
Type: Passive (0x00)
Interval: 180.000 msec (0x0120)
Window: 90.000 msec (0x0090)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Exten.. (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Scan Enable (0x08|0x0042) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Fixes: c45074d68a ("Bluetooth: Fix not generating RPA when required")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit f85949f982 ("xdp: add xdp_set_features_flag utility routine")
added routines to inform the core about XDP flag changes.
GVE support was added around the same time and missed using them.
GVE only changes the flags on error recover or resume.
Presumably the flags may change during resume if VM migrated.
User would not get the notification and upper devices would
not get a chance to recalculate their flags.
Fixes: 75eaae158b ("gve: Add XDP DROP and TX support for GQI-QPL format")
Reviewed-By: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We've noticed that NFS can hang when using RPC over TLS on an unstable
connection, and investigation shows that the RPC layer is stuck in a tight
loop attempting to transmit, but forever getting -EBADMSG back from the
underlying network. The loop begins when tcp_sendmsg_locked() returns
-EPIPE to tls_tx_records(), but that error is converted to -EBADMSG when
calling the socket's error reporting handler.
Instead of converting errors from tcp_sendmsg_locked(), let's pass them
along in this path. The RPC layer handles -EPIPE by reconnecting the
transport, which prevents the endless attempts to transmit on a broken
connection.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Link: https://patch.msgid.link/9594185559881679d81f071b181a10eb07cd079f.1736004079.git.bcodding@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a garbage value problem in fbnic_mac_get_sensor_asic(). 'fw_cmpl'
is uninitialized which makes 'sensor' and '*val' to be stored garbage
value. Revert commit d85ebade02 ("eth: fbnic: Add hardware monitoring
support via HWMON interface") to avoid this problem.
Fixes: d85ebade02 ("eth: fbnic: Add hardware monitoring support via HWMON interface")
Signed-off-by: Su Hui <suhui@nfschina.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106023647.47756-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When booting with a dock connected, the igc driver may get stuck for ~40
seconds if PCIe link is lost during initialization.
This happens because the driver access device after EECD register reads
return all F's, indicating failed reads. Consequently, hw->hw_addr is set
to NULL, which impacts subsequent rd32() reads. This leads to the driver
hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr
prevents retrieving the expected value.
To address this, a validation check and a corresponding return value
catch is added for the EECD register read result. If all F's are
returned, indicating PCIe link loss, the driver will return -ENXIO
immediately. This avoids the 40-second hang and significantly improves
boot time when using a dock with an igc NIC.
Log before the patch:
[ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set.
[ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13
[ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity
Log after the patch:
[ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity
Fixes: ab40561268 ("igc: Add NVM support")
Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ptp4l application reports too high offset when ran on E823 device
with a 100GB/s link. Those values cannot go under 100ns, like in a
working case when using 100 GB/s cable.
This is due to incorrect frequency settings on the PHY clocks for
100 GB/s speed. Changes are introduced to align with the internal
hardware documentation, and correctly initialize frequency in PHY
clocks with the frequency values that are in our HW spec.
To reproduce the issue run ptp4l as a Time Receiver on E823 device,
and observe the offset, which will never approach values seen
in the PTP working case.
Reproduction output:
ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf
ptp4l[5278.775]: master offset 12470 s2 freq +41288 path delay -3002
ptp4l[5278.837]: master offset 10525 s2 freq +39202 path delay -3002
ptp4l[5278.900]: master offset -24840 s2 freq -20130 path delay -3002
ptp4l[5278.963]: master offset 10597 s2 freq +37908 path delay -3002
ptp4l[5279.025]: master offset 8883 s2 freq +36031 path delay -3002
ptp4l[5279.088]: master offset 7267 s2 freq +34151 path delay -3002
ptp4l[5279.150]: master offset 5771 s2 freq +32316 path delay -3002
ptp4l[5279.213]: master offset 4388 s2 freq +30526 path delay -3002
ptp4l[5279.275]: master offset -30434 s2 freq -28485 path delay -3002
ptp4l[5279.338]: master offset -28041 s2 freq -27412 path delay -3002
ptp4l[5279.400]: master offset 7870 s2 freq +31118 path delay -3002
Fixes: 3a7496234d ("ice: implement basic E822 PTP support")
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mask admin command returned max phase adjust value for both input and
output pins. Only 31 bits are relevant, last released data sheet wrongly
points that 32 bits are valid - see [1] 3.2.6.4.1 Get CCU Capabilities
Command for reference. Fix of the datasheet itself is in progress.
Fix the min/max assignment logic, previously the value was wrongly
considered as negative value due to most significant bit being set.
Example of previous broken behavior:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
'phase-adjust': 0,
'phase-adjust-max': 16723,
'phase-adjust-min': -16723,
Correct behavior with the fix:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
'phase-adjust': 0,
'phase-adjust-max': 2147466925,
'phase-adjust-min': -2147466925,
[1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true
Fixes: 90e1c90750 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We use NAPI ID as the key for continuing dumps. We also depend
on the NAPIs being sorted by ID within the driver list. Tx NAPIs
(which don't have an ID assigned) break this expectation, it's
not currently possible to dump them reliably. Since Tx NAPIs
are relatively rare, and can't be used in doit (GET or SET)
hide them from the dump API as well.
Fixes: 27f91aaf49 ("netdev-genl: Add netlink framework functions for napi")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103183207.1216004-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During ARP failure, tid is not inserted but _c4iw_free_ep()
attempts to remove tid which results in error.
This patch fixes the issue by avoiding removal of uninserted tid.
Fixes: 59437d78f0 ("cxgb4/chtls: fix ULD connection failures due to wrong TID base")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20250103092327.1011925-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: 2 Bug fixes
The first patch fixes a potential memory leak when sending a FW
message for the RoCE driver. The second patch fixes the potential
issue of DIM modifying the coalescing parameters of a ring that has
been freed.
====================
Link: https://patch.msgid.link/20250104043849.3482067-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DIM work will call the firmware to adjust the coalescing parameters on
the RX rings. We should cancel DIM work before we call the firmware
to free the RX rings. Otherwise, FW will reject the call from DIM
work if the RX ring has been freed. This will generate an error
message like this:
bnxt_en 0000:21:00.1 ens2f1np1: hwrm req_type 0x53 seq id 0x6fca error 0x2
and cause unnecessary concern for the user. It is also possible to
modify the coalescing parameters of the wrong ring if the ring has
been re-allocated.
To prevent this, cancel DIM work right before freeing the RX rings.
We also have to add a check in NAPI poll to not schedule DIM if the
RX rings are shutting down. Check that the VNIC is active before we
schedule DIM. The VNIC is always disabled before we free the RX rings.
Fixes: 0bc0b97fca ("bnxt_en: cleanup DIM work on device shutdown")
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250104043849.3482067-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When hwrm_req_replace() fails, the driver is not invoking bnxt_req_drop()
which could cause a memory leak.
Fixes: bbf33d1d98 ("bnxt_en: update all firmware calls to use the new APIs")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250104043849.3482067-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an array size limit to the for-loop to be sure we don't try
to reference a fw_version string off the end of the fw info names
array. We know that our firmware only has a limited number
of firmware slot names, but we shouldn't leave this unchecked.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250103195147.7408-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing SW-FW interaction flow on the driver is wrong. Follow this
wrong flow, driver would never return error if there is a unknown command.
Since firmware writes back 'firmware ready' and 'unknown command' in the
mailbox message if there is an unknown command sent by driver. So reading
'firmware ready' does not timeout. Then driver would mistakenly believe
that the interaction has completed successfully.
It tends to happen with the use of custom firmware. Move the check for
'unknown command' out of the poll timeout for 'firmware ready'. And adjust
the debug log so that mailbox messages are always printed when commands
timeout.
Fixes: 1efa9bfe58 ("net: libwx: Implement interaction with firmware")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250103081013.1995939-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2025-01-03
Keisuke Nishimura provided a fix to check for kfifo_alloc() in the ca8210
driver.
Lizhi Xu provided a fix a corrupted list, found by syzkaller, by checking local
interfaces first.
* tag 'ieee802154-for-net-2025-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
mac802154: check local interfaces before deleting sdata list
ieee802154: ca8210: Add missing check for kfifo_alloc() in ca8210_probe()
====================
Link: https://patch.msgid.link/20250103160046.469363-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
