This test loads xdp_metadata.bpf which calls bpf_xdp_metadata_rx_hash() on
incoming packets. The metadata from that packet is then sent to a BPF
map for validation. It borrows structure from xdp.py, reusing common
functions.
The test checks the device's xdp-rx-metadata-features via netlink
before running and skips on devices that do not advertise hash support.
This can be run on veth devices as well as real hardware.
The test is fairly simple and just verifies that a TCP or UDP packet can be
identified as an L4 flow. This minimal test also passes if run on a veth
device.
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260325201139.2501937-7-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This moves a few functions which can be useful to other python programs
that manipulate XDP programs. This also refactors xdp.py to use the
refactored functions.
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260325201139.2501937-6-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds another conditional when cmp_type is CMP_TYPE_RX_L2_V3_CMP for
drivers that support this completion format.
This re-uses bnxt_rss_ext_op to provide similar functionality. One
limitation is for L4 hash-types, protocol-specific bits can't be
determined.
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260325201139.2501937-5-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This allows bnxt_rss_ext_op to be used by other functions. In addition this
modifies the rxcmp argument to be const since the function only reads from
this structure.
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260325201139.2501937-4-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for extracting RSS hash values and hash types from hardware
completion descriptors in XDP programs for bnxt_en.
Add IP_TYPE definition for determining if completion is ipv4 or ipv6. In
addition add ITYPE_ICMP flag for identifying ICMP completions.
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds bnxt_xdp_buff which embeds the xdp_buff struct and stores
pointers to hardware RX completion descriptors (rx_cmp and rx_cmp_ext)
along with the completion type.
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260325201139.2501937-2-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver header for qca8k includes the legacy GPIO header
<linux/gpio.h> but does not use any symbols from it and actually
wants <linux/gpio/consumer.h> so fix this up.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260327-net-dsa-qca8k-v1-1-94e613a5c369@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I misread jhash2() implementation.
Last round should use __jhash_final() instead of __jhash_mix().
Using __jhash_mix() here leaves entropy distributed across a, b, and c,
which might lead to incomplete diffusion of the faddr and fport bits
into the bucket index. Replacing this last __jhash_mix() with
__jhash_final() provides the correct avalanche properties
for the returned value in c.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-4 (-4)
Function old new delta
inet6_ehashfn 306 302 -4
Total: Before=25155089, After=25155085, chg -0.00%
Fixes: 854587e69e ("tcp: improve inet6_ehashfn() entropy")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260327040646.3849503-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fernando Fernandez Mancera says:
====================
Convert CONFIG_IPV6 to built-in and remove stubs
Historically, the Linux kernel has supported compiling the IPv6 stack as
a loadable module. While this made sense in the early days of IPv6
adoption, modern deployments and distributions overwhelmingly either
build IPv6 directly into the kernel (CONFIG_IPV6=y) or disable it
entirely (CONFIG_IPV6=n). The modular IPv6 use-case offers image size
and memory savings for specific setups, this benefit is outweighed by
the architectural burden it imposes on the subsystems on implementation
and maintenance.
In addition, most of the distributions are already using CONFIG_IPV6=y
by default [1], including openWRT [2] and Android gki_defconfig [3]. So
this won't have an impact on them. The most impacted architecture would
probably be arm64 as their default config is still using CONFIG_IPV6=m.
To allow core networking, BPF, Netfilter, and various device drivers to
safely interact with a potentially unloaded IPv6 module, the kernel
relies on indirect call structures like ipv6_stub, ipv6_bpf_stub, and
nf_ipv6_ops, along with dynamic RCU registrations for things like ICMPv6
senders.
This patch series addresses this by changing CONFIG_IPV6 from a tristate
to a boolean, enforcing that IPv6 is either built-in or disabled. This
allows us to completely rip out the stub infrastructures and safely
replace them with direct function calls.
The bloat-o-meter report the following results for m68k, arm64, x86_64
defconfig.
m68k (keep on mind that CONFIG_IPV6 is disabled now):
add/remove: 65/938 grow/shrink: 36/254 up/down: 3022/-49692 (-46670)
arm64:
add/remove: 1251/265 grow/shrink: 81/46 up/down: 448740/-71519 (377221)
x86_64:
add/remove: 62/98 grow/shrink: 10/39 up/down: 2497/-4357 (-1860)
Considering that each new kernel release increases sizes by 30-40KiB on
average, this size increase isn't a huge jump for the distributions that
are still using CONFIG_IPV6=m. For the ones that are already using
CONFIG_IPV6=y, the size is reduced actually.
All the patches has been independently build tested. With allmodconfig
and allmodconfig + CONFIG_IPV6=n. In addition, net selftest has been run
against them on virtme-ng.
The series applied as a whole as been tested with allyesconfig and also
allyesconfig + CONFIG_IPV6=n but not all patches has been independently
tested this way.
[1] https://github.com/nyrahul/linux-kernel-configs
[2] 832e7b8172
[3] https://android.googlesource.com/kernel/common/+/refs/heads/android-mainline/arch/arm64/configs/gki_defconfig
====================
Link: https://patch.msgid.link/20260325120928.15848-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, nf_ipv6_ops can be removed completely as it is
not longer necessary.
Convert all nf_ipv6_ops usage to direct function calls instead. In
addition, remove the ipv6_netfilter_init/fini() functions as they are
not necessary any longer.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-12-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only and there are no more users of ipv6_stub, the
ipv6_stub is now entirely obsolete.
Remove all the code related to the definition, initialization and usage.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-11-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the ipv6_bpf_stub can be removed completely.
Convert all ipv6_bpf_stub usage to direct function calls instead. The
fallback functions introduced previously will prevent linkage errors
when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260325120928.15848-10-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the ipv6_stub infrastructure is no longer
necessary.
Convert remaining ipv6_stub users to make direct function calls. The
fallback functions introduced previously will prevent linkage errors
when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-9-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the ipv6_stub infrastructure is no longer
necessary.
The IPv4 stack interacts with IPv6 mainly to support IPv4 routes with
IPv6 next-hops (RFC 8950). Convert all these cross-family calls from
ipv6_stub to direct function calls. The fallback functions introduced
previously will prevent linkage errors when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-8-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the ipv6_stub infrastructure is no longer
necessary.
Convert all drivers currently utilizing ipv6_stub to make direct
function calls. The fallback functions introduced previously will
prevent linkage errors when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260325120928.15848-7-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for dropping ipv6_stub and converting its users to direct
function calls, introduce static inline dummy functions and fallback
macros in the IPv6 networking headers. In addition, introduce checks on
fib6_nh_init(), ip6_dst_lookup_flow() and ip6_fragment() to avoid a
crash due to ipv6.disable=1 set during booting. The other functions are
safe as they cannot be called with ipv6.disable=1 set.
These fallbacks ensure that when CONFIG_IPV6 is completely disabled,
there are no compiling or linking errors due to code paths not guarded
by preprocessor macro IS_ENABLED(CONFIG_IPV6).
In addition, export ndisc_send_na(), ip6_route_input() and
ip6_fragment().
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-6-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, there is no need to maintain the sender
registration infrastructure used to allow built-in subsystems to send
ICMPv6 messages when IPv6 was compiled as a module.
Drop the registration mechanism and the __icmpv6_send() sender
implementation. While icmpv6_send() users could be converted to
icmp6_send() that doesn't seems necessary as none of them are using the
force_saddr parameter.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-5-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, it does not make sense to continue using
IS_BUILTIN(CONFIG_IPV6). Therefore, replace it with IS_ENABLED() when
necessary and drop it if it isn't valid anymore.
Notice that there is still one instance related to ICMPv6, as it
requires more changes it will be handle separately.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260325120928.15848-4-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, the macro is always evaluating to an empty
one. Remove it completely from the code.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260325120928.15848-3-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During initialization of a VRF device, the VRF driver creates two dst
entries (for IPv4 and IPv6). They are attached to locally generated
packets that are transmitted out of the VRF ports (via the
l3mdev_l3_out() hook). Their purpose is to redirect packets towards the
VRF device instead of having the packets egress directly out of the VRF
ports. This is useful, for example, when a queuing discipline is
configured on the VRF device.
In order to avoid a NULL pointer dereference, commit b0e95ccdd7 ("net:
vrf: protect changes to private data with rcu") made the pointers to the
dst entries RCU protected. As far as I can tell, this was needed because
back then the dst entries were released (and the pointers reset to NULL)
before removing the VRF ports.
Later on, commit f630c38ef0 ("vrf: fix bug_on triggered by rx when
destroying a vrf") moved the removal of the VRF ports to the VRF
device's dellink() callback. As such, the tear down sequence of a VRF
device looks as follows:
1. VRF ports are removed.
2. VRF device is unregistered.
a. Device is closed.
b. An RCU grace period passes.
c. ndo_uninit() is called.
i. dst entries are released.
Given the above, the Tx path will always see the same fully initialized
dst entries and will never race with the ndo_uninit() callback.
Therefore, there is no need to make the pointers to the dst entries RCU
protected. Remove it as well as the unnecessary NULL checks in the Tx
path.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260326203233.1128554-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use dst_dev_put() to clean up the device referenced by the dst entry
instead of partially open coding it. Internally, the helper uses the
blackhole device instead of the loopback device.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326203233.1128554-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VRF driver always allocates an IPv4 dst entry for a VRF device and
prevents the device from being registered if the allocation fails.
Therefore, there is no need to check if the entry exists when tearing
down a VRF device. Remove the check.
Note that the same is not true for the IPv6 dst entry. Its creation can
be skipped if IPv6 is administratively disabled (i.e.,
'ipv6.disable=1').
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326203233.1128554-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Laurent Pinchart says:
====================
net: stmmac: Disable EEE on i.MX
This small patch series fixes a long-standing interrupt storm issue with
stmmac on NXP i.MX platforms.
The initial attempt to fix^Wwork around the problem in DT ([1]) was
painfully but rightfully rejected by Russell, who helped me investigate
the issue in depth. It turned out that the root cause is a mistake in
how interrupts are wired in the SoC, a hardware bug that has been
replicated in all i.MX SoCs that integrate an stmmac. The only viable
solution is to disable EEE on those devices.
Individual patches explain the issue in more details. Patch 1/2,
authored by Russell, adds a new STMMAC_FLAG to disable EEE, and patch
2/2 sets the flag for i.MX platforms.
[1] https://lore.kernel.org/r/20251026122905.29028-1-laurent.pinchart@ideasonboard.com
====================
Link: https://patch.msgid.link/20260325210003.2752013-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i.MX8MP suffers from an interrupt storm related to the stmmac and
EEE. A long and tedious analysis ([1]) concluded that the SoC wires the
stmmac lpi_intr_o signal to an OR gate along with the main dwmac
interrupts, which causes an interrupt storm for two reasons.
First, there's a race condition due to the interrupt deassertion being
synchronous to the RX clock domain:
- When the PHY exits LPI mode, it restarts generating the RX clock
(clk_rx_i input signal to the GMAC).
- The MAC detects exit from LPI, and asserts lpi_intr_o. This triggers
the ENET_EQOS interrupt.
- Before the CPU has time to process the interrupt, the PHY enters LPI
mode again, and stops generating the RX clock.
- The CPU processes the interrupt and reads the GMAC4_LPI_CTRL_STATUS
registers. This does not clear lpi_intr_o as there's no clk_rx_i.
An attempt was made to fixing the issue by not stopping RX_CLK in Rx LPI
state ([2]). This alleviates the symptoms but doesn't fix the issue.
Since lpi_intr_o takes four RX_CLK cycles to clear, an interrupt storm
can still occur during that window. In 1000T mode this is harder to
notice, but slower receive clocks cause hundreds to thousands of
spurious interrupts.
Fix the issue by disabling EEE completely on i.MX8MP.
[1] https://lore.kernel.org/all/20251026122905.29028-1-laurent.pinchart@ideasonboard.com/
[2] https://lore.kernel.org/all/20251123053518.8478-1-laurent.pinchart@ideasonboard.com/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260325210003.2752013-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some platforms have problems when EEE is enabled, and thus need a way
to disable stmmac EEE support. Add a flag before the other LPI related
flags which tells stmmac to avoid populating the phylink LPI
capabilities, which causes phylink to call phy_disable_eee() for any
PHY that is attached to the affected phylink instance.
iMX8MP is an example - the lpi_intr_o signal is wired to an OR gate
along with the main dwmac interrupts. Since lpi_intr_o is synchronous
to the receive clock domain, and takes four clock cycles to clear, this
leads to interrupt storms as the interrupt remains asserted for some
time after the LPI control and status register is read.
This problem becomes worse when the receive clock from the PHY stops
when the receive path enters LPI state - which means that lpi_intr_o
can not deassert until the clock restarts. Since the LPI state of the
receive path depends on the link partner, this is out of our control.
We could disable RX clock stop at the PHY, but that doesn't get around
the slow-to-deassert lpi_intr_o mentioned in the above paragraph.
Previously, iMX8MP worked around this by disabling gigabit EEE, but
this is insufficient - the problem is also visible at 100M speeds,
where the receive clock is slower.
There is extensive discussion and investigation in the thread linked
below, the result of which is summarised in this commit message.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Closes: https://lore.kernel.org/r/20251026122905.29028-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://patch.msgid.link/20260325210003.2752013-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_gd_ring_doorbell() accesses offsets up to DOORBELL_OFFSET_EQ
(0xFF8) + 8 bytes = 4KB within each doorbell page. A db_page_size
smaller than SZ_4K is fundamentally incompatible with the driver:
doorbell pages would overlap and the device cannot function correctly.
Validate db_page_size at the source and fail the
probe early if the value is below SZ_4K. This ensures the doorbell ID
range check in mana_gd_register_device() can rely on db_page_size
being valid.
Fixes: 89fe91c659 ("net: mana: hardening: Validate doorbell ID from GDMA_REGISTER_DEVICE response")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260325180423.1923060-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert confirm_rx to little endian when enqueueing and convert it back on
receive. This fixes control flow on big endian hosts, little endian is
unaffected.
On transmit, store confirm_rx as __le32 using cpu_to_le32(). On receive,
apply le32_to_cpu() before using the value. !! ensures the value is 0 or 1
in native endianness, so the conversion isn’t strictly required here, but
it is kept for consistency and clarity.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: stmmac: remove unused and unimplemented AXI properties
commit afea03656a ("stmmac: rework DMA bus setting and introduce new
platform AXI structure") added support for parsing all the stmmac AXI
attributes, and added code to set most of the appropriate register bits
with three exceptions:
snps,kbbe
snps,mb
snps,rb
These were parsed by the driver, but the result of parsing was never
used by any of the cores.
Moreover, no DTS in the kernel makes use of these properties.
Thus, it doesn't make sense for the driver to parse these, so let's
remove them. Also remove them from the DT binding document.
====================
Link: https://patch.msgid.link/acJh4z3pRKkeaFbR@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the AXI snps,kbbe snps,mb and snps,rb properties as they have
not been used, and although the driver parses these, the code hasn't
ever used the parsed result. This parsing has now been removed.
These were introduced by commit afea03656a ("stmmac: rework DMA bus
setting and introduce new platform AXI structure").
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/E1w4ydt-0000000Dlph-3WvI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
axi_kbbe, axi_mb and axi_rb are all written, but nothing ever reads
their values. Remove the code that sets these and the struct members.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w4ydo-0000000Dlpb-34jd@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Negotiating VIRTIO_NET_F_CTRL_GUEST_OFFLOADS indicates the device
allows control over offload support, but the offloads that can be
controlled may have nothing to do with GRO (e.g., if neither GUEST_TSO4
nor GUEST_TSO6 is supported).
In such a setup, reporting NETIF_F_GRO_HW as available for the device
is too optimistic and misleading to the user.
Improve the situation by masking off NETIF_F_GRO_HW unless the device
possesses actual GRO-related offload capabilities. Out of an abundance
of caution, this does not change the current behaviour for hardware with
just v6 or just v4 GRO: current interfaces do not allow distinguishing
between v6/v4 GRO, so we can't expose them to userspace precisely.
Signed-off-by: Di Zhu <zhud@hygon.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20260323041730.986351-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While net/ipv4/tcp_yeah.c is correctly setting .cwnd_event_tx_start
to tcp_vegas_cwnd_event_tx_start(), I forgot to do the same in tcp_vegas.c
Fixes: d1e59a4697 ("tcp: add cwnd_event_tx_start to tcp_congestion_ops")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260325212440.4146579-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
receive_buf() reads the virtio header through buf before
page_pool_dma_sync_for_cpu() runs in receive_small() or
receive_mergeable(). The header buffer is thus unsynchronized at the
point where flags and, for mergeable buffers, num_buffers are consumed.
Omar Elghoul reported that on s390x Secure Execution this showed up as
greatly reduced virtio-net performance together with "bad gso" and
"bad csum" messages in dmesg. This is because with SE sync actually
copies data, so the header is uninitialized.
Move the sync into receive_buf() so the
header is synchronized before any access through buf.
Tool use: Cursor with GPT-5.4 drafted the initial code move from prompt:
"in drivers/net/virtio_net.c, move page_pool_dma_sync_for_cpu on receive
path to before memory is accessed through buf".
The result and the commit log were reviewed and edited manually.
Fixes: 24fbd3967f ("virtio_net: add page_pool support for buffer allocation")
Reported-by: Omar Elghoul <oelghoul@linux.ibm.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Tested-by: Omar Elghoul <oelghoul@linux.ibm.com>
Link: https://lore.kernel.org/r/20260323150136.14452-1-oelghoul@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Vishwanath Seshagiri <vishs@meta.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/f4caa9be9e5addae7851c012cab0a733be7f0974.1774365273.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxime Chevallier says:
====================
net: dsa: microchip: Small cleanups for ksz9477 SGMII
While working with ksz9477, I've done some very minor cleanups around the
PCS code for the SGMII port. No changes intended.
====================
Link: https://patch.msgid.link/20260324180826.524327-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SGMII support has been added to ksz9477, we can drop the comment saying
that it'll be added later.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260324180826.524327-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_dev_ops .pcs_create() is called under the assumption that the
switch has a PCS port :
if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) {
ret = dev->dev_ops->pcs_create(dev);
[...]
}
The KSZ9477 implementation of .pcs_create() does the same check on
ksz_has_sgmii_port(), and protects the entire function with it.
Drop it, saving a level of indentation and increasing readability.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260324180826.524327-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address "grep: warning: stray \ before white space" warning from GNU
grep 3.12. This warns the misplaced backslashes before whitespaces
(e.g. \\' ' or '\ ') which leads to unspecified behavior [1].
We can just remove the backslashes before whitespaces as POSIX says:
Enclosing characters in single-quotes ('') shall preserve the literal
value of each character within the single-quotes.
and bourne-compatible shells behave so.
[1]: https://lists.gnu.org/r/bug-gnulib/2022-05/msg00057.html
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/dd0bbd48cdf468da56ec34fd61cecd4d2111d7ba.1774372510.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, we incorrectly send messages that are within 4 bytes (a
struct mctp_hdr) smaller than the MTU through mctp_do_fragment_route().
This has no effect on the actual fragmentation, as we will still send as
one packet, but unnecessarily copies the original skb into a new
single-fragment skb.
Instead of having the MTU comparisons in both mctp_local_output() and
mctp_do_fragment_route(), feed all local messages through the latter,
and add the single-packet optimisation there.
This means we can coalesce the routing path of mctp_local_output, so our
out_release path is now solely for errors, so rename the label
accordingly.
Include a check in the route tests for the single-packet case too.
Reported-by: yuanzhaoming <yuanzm2@lenovo.com>
Closes: 269936db5e (r175836230)
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260324-dev-mtu-copy-v1-1-7af6bd7027d3@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Iurman says:
====================
Add support for per-route seg6 tunsrc
This series adds support for the new per-route seg6 "tunsrc" parameter.
Selftests are extended to make sure it works as expected.
Example with the iproute2-next companion patch:
ip -6 r a 2001:db8:1::/64 encap seg6 mode encap tunsrc 2001:db8:ab::
segs 2001:db8:42::1,2001:db8:ffff::2 dev eth0
====================
Link: https://patch.msgid.link/20260324091434.359341-1-justin.iurman@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend srv6_hencap_red_l3vpn_test.sh to include checks for the new
"tunsrc" feature. If there is no support for tunsrc, it silently
falls back to the encap config without tunsrc.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@6wind.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260324091434.359341-3-justin.iurman@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add SEG6_IPTUNNEL_SRC in the uapi for users to configure a specific
tunnel source address. Make seg6_iptunnel handle the new attribute
correctly. It has priority over the configured per-netns tunnel
source address, if any.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@6wind.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260324091434.359341-2-justin.iurman@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tests in phylink_expects_phy() and phylink_fwnode_phy_connect() are
identical (by intention). Use phylink_expects_phy() to decide whether
to ignore a call to phylink_fwnode_phy_connect().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1w4zHg-0000000DmC4-2oyb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maxime Chevallier says:
====================
net: stmmac: dwmac-socfpga: Cleanup .fix_mac_speed
This small series does a bit of cleanup in the dwmad-socfpga glue
driver, especially around the .fix_mac_speed() operation.
It's mostly about re-using existing helpers from the glue driver, as
well as reorganizing the code to make the local private structures a
little bit smaller.
No functionnal changes are intended, this was tested on cyclone V.
====================
Link: https://patch.msgid.link/20260324092102.687082-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
