In MLO scenarios, stations may have multiple links, each with distinct
statistics. When userspace tools like iw or hostapd request station dumps,
attempting to pack all per-link stats into a single netlink message can
easily exceed the default 4KB buffer limit, especially when more than two
links are active. This results in -EMSGSIZE errors and incomplete data
delivery.
To address this, fragment per-link station statistics across multiple
netlink messages to ensure reliable delivery of complete MLO station
information. Extend the stateful context with a two-phase dump mechanism:
phase 0 (AGGREGATED) sends combined MLO-level statistics and phase 1
(PER_LINK) sends individual per-link statistics for each active link.
The dump loop is structured to produce exactly one netlink message per
iteration, with a common header (ifindex, wdev, mac, generation) built
once and phase-specific payload added via a switch statement. This keeps
header construction in one place and makes the EMSGSIZE bail-out uniform.
Add a new request flag attribute, NL80211_ATTR_STA_DUMP_LINK_STATS
(NLA_FLAG), for NL80211_CMD_GET_STATION dump. Userspace can set this
flag to request per-link station statistics for MLO stations.
Extract this flag during the first dump invocation by passing an attrbuf
to nl80211_prepare_wdev_dump(); use __free(kfree) to avoid scattered
manual kfree() calls. Cache the boolean in the dump context to avoid
repeated parsing on subsequent invocations.
Per-link messages carry a single NL80211_ATTR_MLO_LINKS nest with the
link ID, link-specific MAC, and per-link NL80211_ATTR_STA_INFO payload.
The link-specific validity (is_valid_ether_addr) and null pointer guard
are checked in nl80211_put_link_station_payload() before any message
construction begins.
Also fix all nla_nest_start_noflag() calls in nl80211_fill_link_station()
for nested attribute types (STA_INFO, BSS_PARAM, TID_STATS, per-tid) to
use nla_nest_start() so the NLA_F_NESTED flag is set correctly.
Propagate the actual return value from nl80211_put_sta_info_common() in
the AGGREGATED phase rather than returning skb->len. Returning skb->len
signals netlink to re-invoke the dump with the same sta_idx, causing an
infinite loop when the aggregated payload is too large to fit; returning
the real error code (-EMSGSIZE or otherwise) terminates the dump cleanly.
Backward compatibility is seamlessly preserved for non-MLO stations.
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260614051739.3979947-5-praneesh.p@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, nl80211_dump_station() relies on the netlink callback's generic
args array (cb->args[2]) to track the station index during dumps. It also
processes the entire sinfo structure and transmits it to userspace
immediately in a single pass.
This approach creates a bottleneck for MLO. When an MLD station has
multiple active links, the aggregated station information, combined
with the individual per-link statistics, can easily exceed the
maximum netlink message size limits. The current monolithic dump
iteration cannot pause and resume mid-station to fragment these large
per-link statistics across multiple netlink messages.
Introduce a stateful context structure (struct nl80211_dump_station_ctx)
allocated during the dump to track the iteration state. Store the context
pointer directly at cb->args[2], following the same pattern as
nl80211_dump_wiphy which stores its state pointer at cb->args[0].
Move the station index (sta_idx) tracking and the sinfo payload into this
context. The per-station netlink message is built inline in the loop:
common header attributes are assembled directly, then
nl80211_put_sta_info_common() adds the STA_INFO payload.
Furthermore, move the NL80211_CMD_GET_STATION command definition from
genl_small_ops to genl_ops to natively support the .done callback.
Implement nl80211_dump_station_done() to ensure the newly allocated state
context and its deeply allocated sinfo payload are safely freed when the
dump concludes or is aborted prematurely by userspace.
Note that the previous dump path used nl80211_send_station(), which
included NL80211_ATTR_IE and NL80211_ATTR_RESP_IE. These attributes are
not carried forward in this implementation. As documented, association
response IEs (assoc_resp_ies) are only relevant at station creation time
(e.g. via cfg80211_new_sta()) to notify userspace about association
details, and are not expected to be part of get_station()/dump_station()
callbacks. Aligning with this expectation, these IEs are intentionally
omitted here.
This refactoring maintains the existing netlink batching performance while
laying the stateful foundation required for per-link statistics
fragmentation in subsequent patches.
At out_err_release, cfg80211_sinfo_release_content() frees any
dynamically allocated sub-fields inside ctx->sinfo (including per-link
pointers in sinfo.links[]). Without the subsequent memset, those
pointers remain non-NULL in the embedded sinfo. When the dump concludes
or is aborted, nl80211_dump_station_done() calls
cfg80211_sinfo_release_content() a second time on the same ctx->sinfo,
which would free the already-released link memory. The
memset(&ctx->sinfo, 0, sizeof(ctx->sinfo)) zeroes all pointers so the
second release call hits kfree(NULL), which is a harmless no-op.
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260614051739.3979947-4-praneesh.p@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a helper function nl80211_put_sta_info_common() to pack the
station-level (aggregated) STA information into a netlink message.
This prepares the code for future enhancements such as supporting
fragmented link statistics in nl80211_dump_station.
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260614051739.3979947-3-praneesh.p@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove the link level statistics handling from
nl80211_send_station() and drop the unused link_stats parameter
from its signature and callers. The removed code iterated over
each MLO link and attempted to send link specific station data
through NL80211_ATTR_MLO_LINKS, but this logic was never used
because link_stats was always false.
This logic was introduced during early work on link level station
statistics with the intention of reporting information for each
link. Due to message size concerns when a station has multiple
links, the feature was disabled behind the link_stats flag and
remained unused.
The link level reporting block in nl80211_send_station() is dead
code and cannot support larger messages, so remove it. This
cleanup also prepares for proper link level statistics reporting
in nl80211_dump_station() in a later patch, where fragmentation
allows safe transmission of multi link data.
Also fix label indentation: the nla_put_failure label had an
erroneous leading space.
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260614051739.3979947-2-praneesh.p@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The p54 wireless wiki links (wireless.wiki.kernel.org) return 404; the
content moved to the Sphinx documentation site. Point them at the
current wireless.docs.kernel.org pages.
Signed-off-by: Anas Khan <anxkhn28@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20260702102325.63955-1-anxkhn28@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wlcore_alloc_hw() uses __get_free_pages() to allocate TX aggregation
and firmware log buffers used for software data staging.
These buffer can be allocated with kmalloc() as there's nothing special
about them to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_pages() with kzalloc() and free_pages() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260701-b4-drivers-wireless-v1-4-60264cdf2efe@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex debugfs functions allocate buffers for formatting debug output
text using get_zeroed_page().
These buffers can be allocated with kmalloc() as there's nothing special
about them to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260701-b4-drivers-wireless-v1-3-60264cdf2efe@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
libertas debugfs functions allocate buffers for formatting debug
output text using get_zeroed_page().
These buffers can be allocated with kmalloc() as there's nothing special
about them to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260701-b4-drivers-wireless-v1-2-60264cdf2efe@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
b43* debugfs functions allocate 16 KiB buffers for formatting debug output
text using __get_free_pages().
kzalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object and for 16 Kib
allocation kzalloc() will anyway delegate it to buddy.
Replace use of __get_free_pages() with kzalloc().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260701-b4-drivers-wireless-v1-1-60264cdf2efe@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Useful for S1G drivers due to the increased required granularity,
but may be useful for others so include it as a generic helper.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260626063014.1275235-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is needed for drivers and will be needed for mac80211/cfg80211
in the future so introduce a generic accessor to retrieve the
chandefs S1G primary channel width.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260626063014.1275235-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, an AP may receive unprotected beacons from neighbouring
BSSes, which cfg80211_rx_unprot_mlme_mgmt() forwards to userspace via
NL80211_CMD_UNPROT_BEACON regardless of interface type.
While the kernel rate-limits these events to once per 10 seconds per
wdev, in multi-BSS scenarios each AP interface maintains its own
rate-limit state, increasing the number of reported events.
In AP mode, hostapd has no handler for NL80211_CMD_UNPROT_BEACON and
logs an unhandled event message for each occurrence, leading to excessive
log noise and making it harder to identify real issues.
Since an AP does not need to act on unprotected beacons from neighbouring
BSSes, skip reporting this event when operating in AP mode.
Signed-off-by: Dhanavandhana Kannan <dhanavandhana.kannan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623103412.1578812-1-dhanavandhana.kannan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add NL80211_EXT_FEATURE_PROBE_AP to allow drivers to advertise
support for probing the associated AP from STA/P2P-client mode.
Extend nl80211_probe_peer() to accept STA/P2P-client interfaces
when the driver advertises NL80211_EXT_FEATURE_PROBE_AP; in that
case the MAC attribute must be omitted (the peer is implied by
the association).
Update cfg80211_probe_status() to accept an optional peer address
and a link_id parameter (-1 for non-MLO), and include
NL80211_ATTR_MLO_LINK_ID in the event when link_id >= 0.
Update all callers.
Signed-off-by: Priyansha Tiwari <priyansha.tiwari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611062225.2144241-3-pritiwa@qti.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rename NL80211_CMD_PROBE_CLIENT to NL80211_CMD_PROBE_PEER in the UAPI
enum and retain NL80211_CMD_PROBE_CLIENT as a compatibility alias.
Rename the .probe_client cfg80211_ops callback to .probe_peer and
update all in-tree users (wil6210, mwifiex) and mac80211 so the
tree continues to build after this change.
Signed-off-by: Priyansha Tiwari <priyansha.tiwari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611062225.2144241-2-pritiwa@qti.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-7.2-rc2).
No conflicts.
Adjacent changes:
MAINTAINERS:
56114690ff ("MAINTAINERS: Update Marvell octeontx2 driver maintainers")
eb56577ae9 ("ehea: remove the ehea driver")
net/core/netpoll.c:
45f1458a85 ("netpoll: fix a use-after-free on shutdown path")
84c0ff1efb ("netpoll: do not warn when the best-effort pool refill fails")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth: virtio_net: disable cb when NAPI is busy-polled
- eth: lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth: mlx5e: fix use-after-free of metadata_dst on RX SC delete
- eth: enetc: check the number of BDs needed for xdp_frame
- eth: fbnic: don't cache shinfo across skb realloc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=E5mR
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and batman-adv.
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth:
- virtio_net: disable cb when NAPI is busy-polled
- lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth:
- mlx5e: fix use-after-free of metadata_dst on RX SC delete
- enetc: check the number of BDs needed for xdp_frame
- fbnic: don't cache shinfo across skb realloc"
* tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net/mlx5: HWS, fix matcher leak on resize target setup failure
net/sched: hhf: clear heavy-hitter state on reset
net/sched: dualpi2: clear stale classification on filter miss
net/sched: act_bpf: use rcu_dereference_bh() to read the filter
selftests: drv-net: tso: don't touch dangerous feature bits
cxgb4: Fix decode strings dump for T6 adapters
virtio_net: disable cb when NAPI is busy-polled
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
selftests: net: bump default cmd() timeout to 20 seconds
bridge: stp: Fix a potential use-after-free when deleting a bridge
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
net: gianfar: dispose irq mappings on probe failure and device removal
net: lan743x: Initialize eth_syslock spinlock before use
net: libwx: fix VMDQ mask for 1-queue mode
net: airoha: fix max receive size configuration
fsl/fman: Free init resources on KeyGen failure in fman_init()
netfilter: nftables: restrict checkum update offset
netfilter: nftables: restrict linklayer and network header writes
netfilter: nfnetlink_queue: restrict writes to network header
netfilter: nft_fib: reject fib expression on the netdev egress hook
...
* Add MFD mailing list to MAINTAINERS
-----BEGIN PGP SIGNATURE-----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=9mYD
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
- Add MFD mailing list to MAINTAINERS
* tag 'mfd-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
MAINTAINERS: Add a mailing list entry to MFD
Kiran Kumar says:
====================
octeontx2-af: NPC parser and RSS improvements
This series extends the Marvell OcteonTX2 admin-function driver with two
improvements to the NPC (Network Parser CAM) block. The NPC parses packets
received by or transmitted from the NIX, and its matching CAM (MCAM)
selects which VFs, queues, or output ports handle each packet.
Patch 1 reserves a new range of PKINDs (46-53) to support configurable
L2 skip-size parsing. Packets arriving with variable length L2 headers
or a CPT (Cryptographic Accelerator Unit) pre-header can be steered
to one of four skip-size PKINDs so the NPC advances past the right number
of bytes before starting protocol classification. The mbox interface is
extended with a skip_size field so PF/VF drivers can program the desired
L2 offset at run time without rebuilding firmware.
Patch 2 adds a NIX_FLOW_KEY_TYPE_ROCEV2 flow-key type so the RSS engine
can distribute RoCEv2 traffic across receive queues using the destination
Queue Pair (QP) field. Without this, all RoCEv2 flows hash the same
way and land on a single queue.
Both changes target the admin-function driver to improve overall hardware
parsing infrastructure.
====================
Link: https://patch.msgid.link/20260630062145.2533816-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add NIX_FLOW_KEY_TYPE_ROCEV2 flow key type to support RSS hashing on
the RoCEv2 destination Queue Pair (QP) field, allowing RoCEv2 traffic
to be distributed across receive queues.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Link: https://patch.msgid.link/20260630062145.2533816-3-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NPC block uses PKINDs to determine how incoming packets are
parsed. Reserve PKINDs 46-49 (NPC_RX_SKIP_SIZE_PKIND) for
configurable L2 skip-size use in the first pass, and PKINDs 50-53
(NPC_RX_CPT_SKIP_SIZE_PKIND) for the second pass where packets
carry a CPT (Cryptographic Accelerator Unit) header.
Add npc_set_skip_size_pkind() to program NPC_AF_PKINDX_ACTION0
for these reserved PKINDs with a user-supplied ptr_advance value
representing the L2 size to skip. For the corresponding CPT PKINDs
(pkind + 4), additionally configure the var_len_offset, var_len_mask,
var_len_shift, and var_len_right fields so the NPC can extract the
inner payload length from the CPT header.
Update rvu_npc_set_parse_mode() to accept a new skip_size argument
and dispatch to npc_set_skip_size_pkind() when the requested PKIND
falls in the newly reserved range. Extend the npc_set_pkind mbox
message struct with a skip_size field so PF/VF drivers can supply
this value at run time.
Advance NPC_UNRESERVED_PKIND_COUNT to NPC_RX_SKIP_SIZE_PKIND to
reflect the updated reservation boundary.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Link: https://patch.msgid.link/20260630062145.2533816-2-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The mvneta driver uses the hardware Buffer Manager (BM) for RX buffer
allocation. During suspend, mvneta disables its clock, causing BM to
lose all buffer address state. On resume, mvneta_bm_port_init() re-
attaches the BM pool to the NIC, but BM hardware returns stale/garbage
buffer addresses. When NAPI poll processes these buffers, DMA cache
sync hits an invalid virtual address causing a kernel panic:
Unable to handle kernel paging request at virtual address b0000080
PC is at v7_dma_inv_range
Call trace:
v7_dma_inv_range from arch_sync_dma_for_cpu+0x94/0x158
arch_sync_dma_for_cpu from __dma_sync_single_for_cpu+0xc4/0x15c
__dma_sync_single_for_cpu from mvneta_rx_swbm+0x6c8/0xf48
mvneta_rx_swbm from mvneta_poll+0x6fc/0x70c
mvneta_poll from __napi_poll.constprop.0+0x2c/0x1e0
__napi_poll.constprop.0 from net_rx_action+0x160/0x2c4
net_rx_action from handle_softirqs+0xd8/0x2b8
handle_softirqs from run_ksoftirqd+0x30/0x94
run_ksoftirqd from smpboot_thread_fn+0x100/0x204
smpboot_thread_fn from kthread+0xf4/0x110
kthread from ret_from_fork+0x14/0x28
Fix by adding suspend/resume callbacks to the BM driver:
- suspend: drain all buffers (with DMA unmapping), free the BPPE
regions, and reset pool state to FREE before stopping BM and gating
the clock.
- resume: enable the clock, reinitialize BM defaults, and restore pool
read/write pointers and size registers. Pool allocation and buffer
refill are handled by mvneta_resume() through the normal
mvneta_bm_port_init() path, which sees pools as FREE and performs
full initialization identical to probe.
Add a device_link (DL_FLAG_AUTOREMOVE_CONSUMER) in mvneta_probe to
guarantee BM resumes before mvneta and suspends after mvneta. If the
link cannot be created, fall back to SW buffer management to avoid a
potential crash on resume due to unordered PM transitions.
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Link: https://patch.msgid.link/20260630060311.4072140-1-yun.zhou@windriver.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Breno Leitao says:
====================
net: convert UDP getsockopt to sockopt_t
The leaf proto_ops getsockopt callbacks have been moving to the new
getsockopt_iter()/sockopt_t interface.
I was trying to get SMC into getsockop and retire .getsockopt, but,
I found the best approach is to keep converting other protocols.
This series starts the same conversion one layer down, at the struct proto
getsockopt path, beginning with UDP.
Example of the current code.
static int udp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
{
if (level == SOL_UDP)
return udp_lib_getsockopt(sk, level, optname, optval, optlen);
return ip_getsockopt(sk, level, optname, optval, optlen);
}
We want udp_getsockopt to go to .getsockopt_iter, and there are two
approaches in this case:
1) Create a patchset that moves both of them to getsockopt_iter, which
is will be a huge change (ip_getsockopt() is used in many places)
2) Break this down, and transform from bottoms up. First
udp_lib_getsockopt() up to the point we can easily convert
others, such as ip_getsockopt().
I am taking the approach 2), so, the intermediate code will be something
like:
static int udp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen)
{
sockopt_t opt;
int err;
if (level != SOL_UDP)
return ip_getsockopt(sk, level, optname, optval, optlen);
// Convert optlen/optval in sockopt // (first patch)
err = udp_lib_getsockopt(sk, level, optname, &opt);
}
The work is bottom-up and mergeable in small steps: a protocol's inner
getsockopt helper is switched to sockopt_t behind its existing thin
__user wrapper, one patch at a time.
Once every inner helper speaks sockopt_t, a later series flips the shared
struct proto.getsockopt and inet_connection_sock_af_ops.getsockopt signatures
and drops the transitional wrappers.
Signed-off-by: Breno Leitao <leitao@debian.org>
====================
Link: https://patch.msgid.link/20260630-getsockopt_phase2-v2-0-193335f3d4d1@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Exercise the raw getsockopt path now backed by sockopt_t. ICMP_FILTER
returns a fixed-size struct and, unlike the int/u64 options already
covered, clamps the length down to the user buffer on a short read
instead of failing, so check that semantic explicitly along with the
exact and oversized cases, the -EOPNOTSUPP path on a non-ICMP raw
socket, and an unknown optname.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260630-getsockopt_phase2-v2-4-193335f3d4d1@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Continue converting the proto-layer getsockopt callbacks to the sockopt_t
interface, switching do_raw_getsockopt() and its raw_geticmpfilter()
helper to take a sockopt_t.
The thin raw_getsockopt() wrapper keeps its __user signature for now: it
builds a user-backed sockopt_t with sockopt_init_user(), calls the helper,
and writes the returned length back to optlen. The helper uses
copy_to_iter() instead of copy_to_user(). No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260630-getsockopt_phase2-v2-3-193335f3d4d1@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In preparation for converting the proto-layer getsockopt callbacks to the
sockopt_t interface, switch udp_lib_getsockopt() to take a sockopt_t.
The thin udp_getsockopt()/udpv6_getsockopt() wrappers keep their __user
signature for now: they build a user-backed sockopt_t with
sockopt_init_user(), call the helper, and write the returned length back
to optlen. The helper uses copy_to_iter() instead of copy_to_user().
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260630-getsockopt_phase2-v2-2-193335f3d4d1@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a helper that initializes a user-backed sockopt_t from the (optval,
optlen) __user pair passed to a getsockopt() callback.
It is used by transitional __user getsockopt wrappers while the
proto-layer getsockopt callbacks are converted to take a sockopt_t, and
is removed once the conversion is complete.
The goal is to help to convert leafs. Example:
sock_common_getsockopt(... char __user *optval, int __user *optlen)
→ udp_getsockopt(sk, level, optname, optval__user, optlen__user)
→ udp_lib_getsockopt(sk, level, optname, &opt) /* needs a sockopt_t */
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260630-getsockopt_phase2-v2-1-193335f3d4d1@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The device tree binding allows both "ports" and "ethernet-ports" as
the container node name. Try "ethernet-ports" when "ports" is absent
so that newer DTBs with the preferred name work.
This matches the handling already present in qca8k-8xxx.c
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260630015137.1591152-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
page_pool_create() only registers pools with the netdev Netlink
interface when pp_params.netdev is set. Set netdev in page pool
params.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260630013814.3657831-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Walleij says:
====================
net: dsa: realtek: rtl8366rb: Use generic RTL83xx code
As a follow-up to Luiz's and Alvin's series improvining the
generic handling of the Realtek DSA switches, this small
series brings the RTL8366RB closer to the way things are done
in the RTL8365MB driver.
This patch series switches over to using the generic helpers
for:
- Bridge joining and leaving (isolation)
- STP handling
- Learning enable/disable
It would be appreciated if this doesn't lead to AI-automated
request to fix the entire universe (hi Sashiko, I'm looking
at you but I bet you will do you compulsive C3P0-style review
anyway) since I'm just moving code around so some helper
functions come before their new users. The code itself is
pretty straight-forward.
Signed-off-by: Linus Walleij <linusw@kernel.org>
====================
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-0-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of just writing the learning disablement register in setup
and a custom handling of BR_LEARNING, implement the generic RTL83xx
.port_set_learning() callback for setting learning on a port, and
call this in the per-port loop in .setup().
Instead of the custom rtl83366rb_port_bridge_flags() function for
setting learning mode on each port, use the RTL83xx generic
rtl83xx_port_bridge_flags() callback.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-5-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When we loop over all ports in the switch .setup() callback,
make sure to disable learning on all user ports. This is what
is normally expected and what the RTL8365MB is doing.
Move the code around to accommodate for the new call.
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-4-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of custom loops for intializing the ports (including the
CPU port) use the DSA helpers dsa_switch_for_each_port() and
dsa_switch_for_each_cpu_port() following the pattern in RTL8365MB by
accumulatong masks for the upstream and downstream ports.
This gives us similar enough code to the RTL8365MB that we
can start using more generic rtl83xx helpers.
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-3-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RTL8366RB is using its own sub-standard port isolation code.
Implement the required isolation helpers, use these directly in
the port setup callback, and switch over to the standard port
isolation code.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-2-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mostly to make it possible to add rtl83xx support piece by piece,
make the port learning callback optional in rtl83xx_port_bridge_join()
and rtl83xx_port_bridge_leave().
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260630-rtl8366rb-improvements-v2-1-05eb9d6a37f5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The LIST_HEAD macro can both define a linked list and initialize
it in one step. To simplify code, we replace the separate operations
of linked list definition and manual initialization with the LIST_HEAD
macro.
Signed-off-by: Lei Zhu <zhulei@kylinos.cn>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260630065457.160081-1-zhulei_szu@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
set_carrier() ignores the result of the USB control transfer and tests
the stack variable supplied as its receive buffer. If the device rejects
or aborts the request, that variable remains uninitialized and the driver
chooses an arbitrary carrier state.
Leave the existing carrier state unchanged when the link status cannot be
read. A transient USB error should not be treated as link loss.
Reported-by: syzbot+9db6c624635564ad813c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9db6c624635564ad813c
Suggested-by: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260630101216.10365-1-alhouseenyousef@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
David Christensen says:
====================
net: remove the orphaned IBM eHEA driver
The IBM eHEA (Ethernet Host Ethernet Adapter) driver has been orphaned
since April 2024 with no active maintainer stepping forward. This series
removes the driver and associated references from the kernel tree.
The driver was marked as an Orphan on April 18, 2024:
commit 97ec32b583 ("MAINTAINERS: eth: mark IBM eHEA as an Orphan")
In the 13 months since, no maintainer has stepped forward to take
ownership.
The hardware was last supported on IBM POWER7 systems, which reached
end-of-support in December 2020. The driver has received no functional
updates since October 2022:
commit 0e7ce23a91 ("net: ehea: fix possible memory leak in ehea_register_port()")
And has only received mechanical API migrations affecting the entire kernel
tree since that time.
====================
Link: https://patch.msgid.link/20260629211343.3712775-1-drc@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Follow-on cleanup after the removal of the IBM eHEA driver in commit
f721e8ffa92a ("ehea: remove the ehea driver").
Remove the CONFIG_IBM_EHEA entry from ppc64_defconfig and the
EXPORT_SYMBOL_GPL(walk_system_ram_range) export from arch/powerpc/mm/mem.c
that was only needed by the ehea driver.
Signed-off-by: David Christensen <drc@linux.ibm.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/20260629211343.3712775-3-drc@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The IBM eHEA (Ethernet Host Ethernet Adapter) driver has been orphaned
since April 2024 with no active maintainer. The hardware was last
supported on IBM POWER7 systems which reached end-of-support in
December 2020. The driver has received no functional updates since
October 2022, with all subsequent changes being mechanical API
migrations affecting the entire kernel tree.
A search of lore.kernel.org for the last 24 months reveals no user
reports, no objections to the orphan status, and no maintenance
discussions indicating active hardware deployment.
The code is preserved in git history and can be restored if a
maintainer steps forward to take ownership.
Signed-off-by: David Christensen <drc@linux.ibm.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://patch.msgid.link/20260629211343.3712775-2-drc@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- fix pointers after potential skb reallocs (5 patches)
- dat: ensure accessible eth_hdr proto field
-----BEGIN PGP SIGNATURE-----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=H0KB
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260630' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfix, all by Sven Eckelmann:
- fix pointers after potential skb reallocs (5 patches)
- dat: ensure accessible eth_hdr proto field
* tag 'batadv-net-pullrequest-20260630' of https://git.open-mesh.org/batadv:
batman-adv: dat: ensure accessible eth_hdr proto field
batman-adv: bla: reacquire gw address after skb realloc
batman-adv: dat: acquire ARP hw source only after skb realloc
batman-adv: gw: acquire ethernet header only after skb realloc
batman-adv: access unicast_ttvn skb->data only after skb realloc
batman-adv: retrieve ethhdr after potential skb realloc on RX
====================
Link: https://patch.msgid.link/20260630134430.85786-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- drop hardif global list, by Nora Schiffer (2 patches)
- make hard_iface->mesh_iface immutable, by Sven Eckelmann
- further post-hardif global list cleanups,
by Nora Schiffer (3 patches)
- cleanups and simplifications depending on the hardif->mesh_iface
immutability guarantee, by Sven Eckelmann (3 patches)
- tvlv: extract tvlv header iterator, by Sven Eckelmann
- tp_meter: improve unacked list handling,
by Sven Eckelmann (5 patches)
-----BEGIN PGP SIGNATURE-----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=TykP
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20260630' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- drop hardif global list, by Nora Schiffer (2 patches)
- make hard_iface->mesh_iface immutable, by Sven Eckelmann
- further post-hardif global list cleanups,
by Nora Schiffer (3 patches)
- cleanups and simplifications depending on the hardif->mesh_iface
immutability guarantee, by Sven Eckelmann (3 patches)
- tvlv: extract tvlv header iterator, by Sven Eckelmann
- tp_meter: improve unacked list handling,
by Sven Eckelmann (5 patches)
* tag 'batadv-next-pullrequest-20260630' of https://git.open-mesh.org/batadv:
batman-adv: tp_meter: delay allocation of unacked entry
batman-adv: tp_meter: adjust name of receiver lock
batman-adv: tp_meter: keep unacked list for receivers
batman-adv: tp_meter: combine adjacent/overlapping unacked entries
batman-adv: tp_meter: simplify unordered ack calculation
batman-adv: tvlv: extract tvlv header iterator
batman-adv: iv: drop migration check for batadv_hard_iface
Revert "batman-adv: v: stop OGMv2 on disabled interface"
batman-adv: drop NULL check for immutable hardif->mesh_iface
batman-adv: drop unneeded goto and initialization from batadv_hardif_disable_interface()
batman-adv: move hardif generation counter into batadv_priv
batman-adv: remove BATADV_IF_NOT_IN_USE hardif state
batman-adv: make hard_iface->mesh_iface immutable
batman-adv: remove global hardif list
batman-adv: create hardif only for netdevs that are part of a mesh
====================
Link: https://patch.msgid.link/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RPS test needs a free CPU within the first RPS_MAX_CPUS (16)
cores. This is easily violated if the NIC or env allocates the
IRQs to cores linearly.
Cap the Rx queues at 8, we don't need more. This makes the test
pass on CX7 in NIPA.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260629234354.2154541-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The phylink_mac_ops '.validate()' has been removed in:
commit da5f6b80ad ("net: phylink: remove .validate() method")
There are still a few comments around in phylink that references that,
related to the ports fields as well as the Pause configuration. Let's
drop these references and update the comments related to Pause handling.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260630083700.2041915-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hws_bwc_matcher_move() allocates a replacement matcher before setting it
as the resize target. If mlx5hws_matcher_resize_set_target() fails, the
replacement matcher is not attached anywhere and is leaked.
Fix the leak by destroying the replacement matcher before returning from
the resize-target failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
mlx5 HWS-capable device to test with, no runtime testing was able to be
performed.
Fixes: 2111bb970c ("net/mlx5: HWS, added backward-compatible API handling")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260629064049.3852759-1-dawei.feng@seu.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- bootconfig: Fix NULL-pointer arithmetic
Fix undefined pointer arithmetic in xbc_snprint_cmdline() when probing
the buffer length with NULL and size 0. Track the written length as a
size_t instead to prevent build-time UBSan/FORTIFY_SOURCE failures.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmpEY1sbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bxAgH/A+wNARuaA8k3qHdRrzm
eoKNfwPNc2C+QwPMsYVgk0aa1HaZWwuJ7FJQn0P0z3uXO6uvDg5S3q2LTyyLyoTy
3DFcyrAQ1eIk5tj88LTmLHq5a6Jntsl+OZMXy3gU8fVJV8sQFYt1fovHctn0oaY3
Yw5iwGkVzwFMh4BwZn9RfH73zECeUticJeO4qQadRApMsrWgNDz7f+P8YzcUxbBx
BLBE4hnfKA5awRoYaOqGQ5jHsPoyj5GwwDEt+KU412M/E85rQAfGDyw5RXwqnb91
rs7w6EJ8nfEGWDpqJTpZQxZbpvNc88cnh08lnxyFKGWiOBvV7G/qRNXG4AmI2e//
oh4=
=t5+P
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fix from Masami Hiramatsu:
- bootconfig: Fix NULL-pointer arithmetic
Fix undefined pointer arithmetic in xbc_snprint_cmdline() when
probing the buffer length with NULL and size 0. Track the written
length as a size_t instead to prevent build-time UBSan/FORTIFY_SOURCE
failures.
* tag 'bootconfig-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: fix NULL-pointer arithmetic in xbc_snprint_cmdline()
