Only the client-buffer setup uses the pitch field from struct
drm_client_buffer. Remove the field and pass the value among setup
helpers.
Clients that need the pitch should rather look at the framebuffer's
pitches[0] directly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Francesco Valla <francesco@valla.it>
Link: https://patch.msgid.link/20251027121042.143588-2-tzimmermann@suse.de
Fix typos in qaic.rst file.
Signed-off-by: Sourab Bera <quic_sourbera@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024165749.821414-1-youssef.abdulrahman@oss.qualcomm.com
During power down, pending DVFS operations may still be in progress
when the NPU reset is asserted after CDYN=0 is set. Since the READY
bit may already be deasserted at this point, checking only the READY
bit is insufficient to ensure all transactions have completed.
Add an explicit check for CDYN de-assertion after the READY bit check
to guarantee no outstanding transactions remain before proceeding.
Fixes: 550f4dd2ce ("accel/ivpu: Add support for Nova Lake's NPU")
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251030091700.293341-1-karol.wachowski@linux.intel.com
The driver has never supported anything but OF probe so drop the unused
platform module alias incorrectly added by commit b2da05ff47
("imx-drm: parallel-display: Add MODULE_ALIAS()")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250924092643.26113-5-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The driver has never supported anything but OF probe so drop the
unused platform module alias incorrectly added by commit 52db752c3d
("imx-drm: imx-tve: Add MODULE_ALIAS()").
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250924092643.26113-4-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The driver has never supported anything but OF probe so drop the unused
platform module alias incorrectly added by commit bc627387a9
("imx-drm: imx-ldb: Add MODULE_ALIAS()").
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250924092643.26113-3-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The driver has never supported anything but OF probe so drop the unused
platform module alias which was incorrectly added by commit 3d1b35a3d9
("drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode").
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250924092643.26113-2-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The display subsystem represent how IPs are interacting together and
have nothing to do within the SoC node.
Extract it from the SoC node and let IPs nodes in the Soc node.
Several nodes did not use conventional name:
* sti-display-subsystem -> display-subsystem
* sti-controller -> display-controller
* sti-tvout -> encoder
* sti-hda -> analog
* sti-hqvdp -> plane
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20250717-sti-rework-v1-3-46d516fb1ebb@gmail.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Enhance the probing sequence by using the ports property of the
display-subsystem node.
That done, it becomes possible to handle the display-substem node
outside of the soc node within the device-tree and not have each IP
blocks as children of the display-subsystem node.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20250717-sti-rework-v1-2-46d516fb1ebb@gmail.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Return value for DMA allocation was not checked. Check it and return
error code in case of failing.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20250717-sti-rework-v1-1-46d516fb1ebb@gmail.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
OS scheduling mode gets deprecated starting from NPU6 onward.
Print warning and fallback to HW scheduling mode if OS mode is
explicitly selected with sched_mode parameter.
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029201554.257708-1-karol.wachowski@linux.intel.com
Introduce a new ioctl `drm_ivpu_bo_create_from_userptr` that allows
users to create GEM buffer objects from user pointers to memory regions.
The user pointer must be page-aligned and the memory region must remain
valid for the buffer object's lifetime.
Userptr buffers enable direct use of mmapped files (e.g. inference
weights) in NPU workloads without copying data to NPU buffer objects.
This reduces memory usage and provides better flexibility for NPU
applications.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029091752.203198-1-karol.wachowski@linux.intel.com
Fix 'Memory manager not clean during takedown' warning that occurs
when ivpu_gem_bo_free() removes the BO from the BOs list before it
gets unmapped. Then file_priv_unbind() triggers a warning in
drm_mm_takedown() during context teardown.
Protect the unmapping sequence with bo_list_lock to ensure the BO is
always fully unmapped when removed from the list. This ensures the BO
is either fully unmapped at context teardown time or present on the
list and unmapped by file_priv_unbind().
Fixes: 48aea7f2a2 ("accel/ivpu: Fix locking in ivpu_bo_remove_all_bos_from_context()")
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029071451.184243-1-karol.wachowski@linux.intel.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029165642.364488-3-marco.crivellari@suse.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251029165642.364488-2-marco.crivellari@suse.com
Synaptics TDDI (Touch/Display Integration) panels utilize a single chip
for display and touch controllers. Implement a simple device driver for
such panels, along with its built-in LED backlight controller, and add
support for TD4101 and TD4300 panels in the driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251009-panel-synaptics-tddi-v5-2-59390997644e@disroot.org
Document the Synaptics TDDI (Touch/Display Integration) panel hardware.
Along with the MIPI-DSI panel, these devices also have an in-built LED
backlight device and a touchscreen, all packed together in a single chip.
Also, add compatibles for supported panels - TD4101 and TD4300. Both
have the '-panel' suffix so as to remove any ambiguity between the panel
and touchscreen chips.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251009-panel-synaptics-tddi-v5-1-59390997644e@disroot.org
Update the panel example in this DT schema to match requirements in binding
display/panel/ilitek,ili9881c.yaml . This fixes the following schema check
warnings:
"
/tmp/dtx/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb: panel@0 (raspberrypi,dsi-7inch): compatible: ['raspberrypi,dsi-7inch'] is too short
from schema $id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml
/tmp/dtx/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb: panel@0 (raspberrypi,dsi-7inch): 'power-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml
"
Fixes: c376a69437 ("dt-bindings: display: bridge: renesas,dsi-csi2-tx: Allow panel@ subnode")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029200519.214548-1-marek.vasut+renesas@mailbox.org
Add panel driver used in the OnePlus 6T.
No datasheet, based mostly on EDK2 init sequence and the downstream driver.
Note: This driver doesn't use previously mentioned "samsung,s6e3fc2x01"
by OnePlus 6T device-tree.
The reason is because DDIC itself without knowing the panel type used
with it will not give the driver enough information about the panel used,
as the panel cannot be autodetected.
While would be more practical to support the original compatible,
I would like to avoid it, to prevent confusing devs upstreaming DDICs.
Based on work of:
Casey Connolly <casey@connolly.tech>
Joel Selvaraj <foss@joelselvaraj.com>
Nia Espera <a5b6@riseup.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Jessica Zhang <jesszhan0024@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251023-s6e3fc2x01-v5-2-8f8852e67417@ixit.cz
Basic description for S6E3FC2X01 DDIC with attached panel AMS641RW.
Samsung AMS641RW is 6.41 inch, 1080x2340 pixels, 19.5:9 ratio panel
This panel has three supplies, while panel-simple-dsi is limited to one.
There is no user of this compatible, nor the compatible make sense.
Remove it from simple DSI panel definitions.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251023-s6e3fc2x01-v5-1-8f8852e67417@ixit.cz
Although there are various small changes between the init
sequences, the second half is common for all 3 currently
supported displays.
Note that this is only compile-tested.
Signed-off-by: Priit Laes <plaes@plaes.org>
Tested-by: John Watts <contact@jookia.org>
Reviewed-by: John Watts <contact@jookia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20250619132211.556027-1-plaes@plaes.org
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20251027133956.393375-1-sakari.ailus@linux.intel.com
Rework of imported buffers introduced in the commit
e0c0891cd6 ("accel/ivpu: Rework bind/unbind of imported buffers")
switched the logic of imported buffers by dma mapping/unmapping
them just as the regular buffers.
The commit didn't include removal of skipping dma unmap of imported
buffers which results in them being mapped without unmapping.
Fixes: e0c0891cd6 ("accel/ivpu: Rework bind/unbind of imported buffers")
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20251027150933.2384538-1-maciej.falkowski@linux.intel.com
Convert register bitfields to GENMASK() macro where applicable.
Use FIELD_PREP() throughout the driver.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-12-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Convert register bits to BIT() macro where applicable. This is done
automatically using regex 's@(1 << \([0-9]\+\))@BIT(\1)', except for
bitfields which are manually updated to use GENMASK().
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-11-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Introduce TXVMVPRMSET0R_BPP_MASK macro and use FIELD_PREP() to generate
appropriate bitfield from mask and value without bitshift, assign this
value into vprmset0r. Remove TXVMVPRMSET0R_CSPC_RGB which is never used,
replace it with code comment next to TXVMVPRMSET0R_CSPC_YCbCr.
Replace (mode->flags & DRM_MODE_FLAG_P.SYNC) test with inverted conditional
(mode->flags & DRM_MODE_FLAG_N.SYNC) and bitwise orr vprmset0r with either
or both TXVMVPRMSET0R_HSPOL_LOW and TXVMVPRMSET0R_VSPOL_LOW if conditional
matches.
Do not convert bits and bitfields to BIT() and GENMASK() yet, to be
consisten with the current style. Conversion to BIT() and GENMASK()
macros is done at the very end of this series in the last two patches.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-10-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cache DSI mode flags in new mode_flags member of struct rcar_mipi_dsi .
Configure TXVMSETR register based on the content of DSI mode flags in
case the controller operates in video mode.
Rename TXVMSETR_H..BPEN_EN to TXVMSETR_H..BPEN and drop TXVMSETR_H..BPEN_DIS
which resolves to 0. Update TXVMSETR_VSEN in the same manner. Replace
TXVMSETR_SYNSEQ_PULSES with a code comment next to TXVMSETR_SYNSEQ_EVENTS
because TXVMSETR_SYNSEQ_PULSES resolves to 0.
Do not convert bits and bitfields to BIT() and GENMASK() yet, to be
consisten with the current style. Conversion to BIT() and GENMASK()
macros is done at the very end of this series in the last two patches.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-9-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Introduce TXVMPSPHSETR_DT_MASK macro and use FIELD_PREP() to generate
appropriate bitfield from mask and value without bitshift.
Do not convert bits and bitfields to BIT() and GENMASK() yet, to be
consisten with the current style. Conversion to BIT() and GENMASK()
macros is done at the very end of this series in the last two patches.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-8-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Introduce CLOCKSET1_CLKINSEL_MASK macro and remove bitshift from
values to make this bitfield usable with FIELD_PREP(). There are
no users of this bitfield, hence no updates to the DSI driver.
Do not convert bits and bitfields to BIT() and GENMASK() yet, to be
consisten with the current style. Conversion to BIT() and GENMASK()
macros is done at the very end of this series in the last two patches.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-7-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Introduce VCLKSET_BPP_MASK macro and use FIELD_PREP() to generate
appropriate bitfield from mask and value without bitshift. Remove
VCLKSET_COLOR_RGB which is never used, replace it with code comment.
Do not convert bits and bitfields to BIT() and GENMASK() yet, to be
consisten with the current style. Conversion to BIT() and GENMASK()
macros is done at the very end of this series in the last two patches.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-6-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Call mipi_dsi_pixel_format_to_bpp() once in rcar_mipi_dsi_set_display_timing()
and store the value into a variable. This slightly simplifies the code.
No functional change.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The register PHTR bitfield TESTDOUT is not a single bit, but a
bitfield. Add a MASK macro and a _TEST bitfield value, which is
used by the driver to poll for completion. No functional change.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The register TXVMSETR bitfield PIXWDTH is not a single bit, but a
bitfield. Add a MASK macro and document that the only allowed value
that can ever be written into the bitfield is the current value, 1.
No functional change.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20251028232959.109936-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The RXSETR_CRCEN(n) and RXSETR_ECCEN(n) macros both take parameter (n),
add the missing macro parameter. Neither of those macros is used by the
driver, so for now the bug is harmless.
Fixes: 685e8dae19 ("drm/rcar-du: dsi: Implement DSI command support")
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reported-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20251028232959.109936-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
drm_{crtc,plane,connector,private_obj}_get_state() must not
be called after the atomic check phase. At that point the commit
has been carved in stone and no new objects must be introduced
into it. WARN if anyone attempts to violate this rule.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251017163327.9074-2-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <mripard@kernel.org>
The crtc/plane/connector counterparts of
drm_atomic_get_private_obj_state() all WARN about a missing
acquire_ctx. Do the same in drm_atomic_get_private_obj_state()
for consistency.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251017163327.9074-1-ville.syrjala@linux.intel.com
Reviewed-by: Maxime Ripard <mripard@kernel.org>
The RISC-V Svpbmt privileged extension provides support for overriding
page memory coherency attributes, and, along with vendor extensions like
Xtheadmae, supports pgprot_{writecombine,noncached} on RISC-V.
Adapt the codepath that maps ttm_write_combined to pgprot_writecombine
and ttm_noncached to pgprot_noncached to RISC-V, to allow proper page
access attributes.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Tested-by: Han Gao <rabenda.cn@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20251020053523.731353-1-uwu@icenowy.me
QAIC_MANAGE_EXT_MSG_LENGTH is ambiguous and has been confused with
QAIC_MANAGE_MAX_MSG_LENGTH. Rename it to clarify it's a wire length.
Signed-off-by: Troy Hanson <thanson@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: capitalize subject]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022141606.3740470-1-youssef.abdulrahman@oss.qualcomm.com
Replace the word "Qranium" with "qaic" in the function parameter
description.
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: adjust word wrapping in commit text]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022124107.3712466-1-youssef.abdulrahman@oss.qualcomm.com
Update the Sahara image table for the AIC200 to add entries for:
- qupv3fw.elf at id 54
- xbl_config.elf at id 38
- tz_qti_config.mbn at id 76
And move pvs.bin to id 78 to avoid firmware conflict.
Co-developed-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Signed-off-by: Zack McKevitt <zmckevit@qti.qualcomm.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017173432.1207656-1-youssef.abdulrahman@oss.qualcomm.com
Back in the day a specialized lockless queue was designed solely for the
DRM GPU Scheduler: spsc_queue. This queue's only user is drm_sched, and
there is no dedicated maintainer entry for the queue.
Add the spsc_queue header to the DRM GPU Scheduler MAINTAINERS' section.
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251024081459.164634-2-phasta@kernel.org
Unconditionally reset plane->state to NULL if the allocation of the
shadow plane state fails. Avoids an invalid address in the field.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20251017091919.58770-1-tzimmermann@suse.de
Add a driver for Arm Ethos-U65/U85 NPUs. The Ethos-U NPU has a
relatively simple interface with single command stream to describe
buffers, operation settings, and network operations. It supports up to 8
memory regions (though no h/w bounds on a region). The Ethos NPUs
are designed to use an SRAM for scratch memory. Region 2 is reserved
for SRAM (like the downstream driver stack and compiler). Userspace
doesn't need access to the SRAM.
The h/w has no MMU nor external IOMMU and is a DMA engine which can
read and write anywhere in memory without h/w bounds checks. The user
submitted command streams must be validated against the bounds of the
GEM BOs. This is similar to the VC4 design which validates shaders.
The job submit is based on the rocket driver for the Rockchip NPU
utilizing the GPU scheduler. It is simpler as there's only 1 core rather
than 3.
Tested on i.MX93 platform (U65) and FVP (U85) with Mesa Teflon
support.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251020-ethos-v6-2-ecebc383c4b7@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a binding schema for Arm Ethos-U65/U85 NPU. The Arm Ethos-U NPUs are
designed for edge AI inference applications.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251020-ethos-v6-1-ecebc383c4b7@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
In aie2_get_hwctx_status() and aie2_query_ctx_status_array(), the
functions could return an uninitialized value in some cases. Update them
to always return 0. The amount of valid results is indicated by the
returned buffer_size, element_size, and num_element fields.
Fixes: 2f509fe6a4 ("accel/amdxdna: Add ioctl DRM_IOCTL_AMDXDNA_GET_ARRAY")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251024165503.1548131-1-lizhi.hou@amd.com
When the driver issues the SYNC_DEBUG_BO command, it currently returns 0
even if the firmware fails to execute the command. Update the driver to
return -EINVAL in this case to properly indicate the failure.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aPsadTBXunUSBByV@stanley.mountain/
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251024162608.1544842-1-lizhi.hou@amd.com
