Increase time of holding HPD lane low by 50ms. This fixes EDID change not
detected by source/display side.
Fixes: 7b59b132ad ("media: platform: synopsys: Add support for HDMI input driver")
Cc: stable@vger.kernel.org
Reported-by: Ross Cawston <ross@r-sc.ca>
Closes: https://lore.kernel.org/linux-rockchip/20260209061654.54757-1-ross@r-sc.ca/
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The DEBUG_TIMING macro is commented out and can never be defined,
making the print_time() function body always empty. Remove the
commented-out macro, the unused function definition and all its
call sites as they serve no purpose.
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove commented-out line of dead code that serves no purpose.
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In vip_probe_slice(), the error check for devm_kzalloc() incorrectly
uses PTR_ERR_OR_ZERO() which returns 0 for NULL pointer.
Return -ENOMEM for devm_kzalloc() failure.
Fixes: fc2873aa4a ("media: ti: vpe: Add the VIP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Return the actual error code from devm_request_irq() instead of
incorrectly returning -ENOMEM.
Fixes: fc2873aa4a ("media: ti: vpe: Add the VIP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In vip_probe_complete(), the fwnode_handle reference is not released
if the loop continues via the default switch case or if alloc_port()
fails. This results in a reference count leak.
Switch to using the __free(fwnode_handle) cleanup attribute to ensure
the reference is automatically released when the handle goes out of
scope.
Fixes: fc2873aa4a ("media: ti: vpe: Add the VIP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
syzbot reported a general protection fault in
vidtv_psi_ts_psi_write_into [1].
vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does
not check for this before dereferencing the returned pointer to access
the continuity counter. This leads to a general protection fault when
accessing a near-NULL address.
The root cause is that vidtv_mux_pid_ctx_init() does not check the
return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs.
If the allocation fails, the PID context is never created, but init
returns success. The subsequent vidtv_mux_push_si() call then gets
NULL from vidtv_mux_get_pid_ctx() and crashes.
Fix both the root cause (add error check in vidtv_mux_pid_ctx_init
for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for
all vidtv_mux_get_pid_ctx() calls.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events vidtv_mux_tick
RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197
Call Trace:
<TASK>
vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline]
vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231
vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196
vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408
Fixes: f90cf6079b ("media: vidtv: add a bridge driver")
Cc: stable@vger.kernel.org
Reported-by: syzbot+814c351d094f4f1a1b86@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=814c351d094f4f1a1b86
Signed-off-by: Ruslan Valiyev <linuxoid@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The RK3588 MIPI CSI-2 receivers are compatible to the ones found in the
RK3568. Introduce a list of compatible variants and add the RK3588 variant
to it.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The get_hsfreq_by_mbps() function searches the freqranges[] table
backward (from highest to lowest index). Because adjacent frequency
bands overlap, a data rate that falls in the overlap region always
lands on the higher-indexed band.
For data rates up to 1500 Mbps (index 42) every band uses
osc_freq_target 335. Starting at index 43 (1461-1640 Mbps) the
osc_freq_target drops to 208. A sensor running at 1498 Mbps sits in
the overlap between index 42 (1414-1588, osc 335) and index 43
(1461-1640, osc 208). The backward search picks index 43, programming
the lower osc_freq_target of 208 instead of the optimal 335.
This causes DDL lock instability and CSI-2 CRC errors on affected
configurations, such as the OmniVision OV08X40 sensor on Intel Arrow
Lake platforms (Dell Pro Max 16).
Rewrite get_hsfreq_by_mbps() to select the optimal band:
1. Among bands whose min/max range covers the data rate, prefer
the one with the higher osc_freq_target.
2. If osc_freq_target is equal, prefer the band whose default_mbps
is closest to the requested rate.
Since the frequency ranges are monotonically increasing, the loop
exits early once min exceeds the requested rate.
For 1498 Mbps this now correctly selects index 42 (osc_freq_target
335, range 1414-1588) instead of index 43 (osc_freq_target 208,
range 1461-1640).
Fixes: 1e7eeb3016 ("media: intel/ipu6: add the CSI2 DPHY implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The ipu7 driver's TODO specifies that the 'U' suffix should be
removed from hexadecimal values in register definitions.
This patch cleans up the definitions in the header files within the
ipu7 directory to comply with the requirements and improve consistency.
The modification was verified by comparing the disassembly of the
built-in.a archive before and after the change. The MD5 hashes of the
disassembly output remained identical, confirming that this is a
purely cosmetic cleanup with no functional impact on the binary.
Signed-off-by: Lian Xiangyu <lin25001x@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and
then passed to ipu7_bus_initialize_device(), which stores it in
adev->pdata. The ipu7_bus_release() function frees adev->pdata when the
device's reference count drops to zero.
Two error paths incorrectly call kfree(pdata) after the device teardown
has already freed it:
1. When ipu7_mmu_init() fails: put_device() is called, which drops the
reference count to zero and triggers ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is a double-free.
2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit()
internally, which calls put_device() -> ipu7_bus_release() ->
kfree(pdata). The subsequent kfree(pdata) is again a double-free.
Note that the kfree(pdata) when ipu7_bus_initialize_device() itself
fails is correct, because in that case auxiliary_device_init() failed
and the release function was never set up, so pdata must be freed
manually.
Additionally, the error code was not saved before calling put_device(),
causing ERR_CAST() to dereference the already-freed adev pointer when
constructing the return value. Fix this by saving the error from
dev_err_probe() before put_device() and returning ERR_PTR() instead.
Remove the redundant kfree(pdata) calls and fix the use-after-free in
the return values of the two affected error paths.
Fixes: b7fe4c0019 ("media: staging/ipu7: add Intel IPU7 PCI device driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The I²C device id table is necessary as the device may be, besides through
system firmware, also instantiated in the IPU bridge so matching takes
place using the I²C device id table. Add back the table, with ids for all
supported devices.
Reported-by: Michael Anthony <manthony.nw@outlook.com>
Closes: https://lore.kernel.org/linux-media/AMBP190MB2678E7DC048409068260DCE8ED4AA@AMBP190MB2678.EURP190.PROD.OUTLOOK.COM/
Fixes: 15faf0fa14 ("media: i2c: dw9719: Remove unused i2c device id table")
Cc: stable@vger.kernel.org # for v6.19 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
If secocec_ir_probe() fails after cec_register_adapter() succeeds,
probe returns an error and the driver remove callback is not called.
The current unwind path unregisters the notifier and then falls through
to cec_delete_adapter(), which violates the CEC adapter lifetime rules
after a successful registration.
Add a registered-adapter unwind path that unregisters the notifier and
the adapter instead.
Fixes: daef95769b ("media: seco-cec: add Consumer-IR support")
Cc: stable@vger.kernel.org
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Google Dirkson device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.
Signed-off-by: Kells Ping <kells.ping@quanta.corp-partner.google.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Google Kulnex and Moxoe device uses the same approach as Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.
Signed-off-by: Ken Lin <kenlin5@quanta.corp-partner.google.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Provide the real DV timings limits in VIDIOC_DV_TIMINGS_CAP. For the
outputs the pixelclock is limited by the CMT table <25000kHz, 2*94642kHz>,
for the inputs a slightly broader range is possible. The minimal
supported/tested resolution is 64px.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If a sub-device does not set enable_streams() and disable_streams() pad
ops while it sets the s_stream() video op to
v4l2_subdev_s_stream_helper(), enabling or disabling streaming either way
on the sub-device will result calling v4l2_subdev_s_stream_helper() and
v4l2_subdev_{enable,disable}_streams() recursively, exhausting the stack.
Return -ENOIOCTLCMD in this case to handle the situation gracefully.
Fixes: b62949ddaa ("media: subdev: Support single-stream case in v4l2_subdev_enable/disable_streams()")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining max packet size) instead of open coding.
Note that the device has two bulk endpoints so there is no functional
change here.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Use the common USB helper for looking up interrupt-in endpoints instead
of open coding.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
This is a Sonix SN8P2202XG microcontroller with firmware compatible with
the already supported Northstar 04eb:e004, implementing an MCE IR receiver
(PCB seems to be tracked for a transmitter too but missing related parts).
Found in a Skintek SK-CR-IN+IR ( http://www.skintek.it/SK-CR-IN+IR.php )
internal 3.5 inch USB card reader and MCE receiver combo
(implemented by, and wired as, separate USB devices)
PCB marking: AU6475 966816 STIR REV:A02 MCE
Signed-off-by: Riccardo Boninsegna <rboninsegna2@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
The VSPD block on the RZ/G3E SoC is identical to the one found on the
RZ/G2L SoC.
No driver changes are required, as `renesas,r9a07g044-vsp2` will be used
as a fallback compatible string on the RZ/G3E SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/c1e2eb36af01e0cddd8050ba70847c3a0821c91e.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The FCPVD block on the RZ/G3E SoC is identical to the one found on the
RZ/G2L SoC.
No driver changes are required, as `renesas,fcpv` will be used as a
fallback compatible string on the RZ/G3E SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/5aaf561a66c24639477a99d3861ca969a81673f0.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The VSPD block on the RZ/G3L SoC is identical to the one found on the
RZ/G2L SoC. Document RZ/G3L VSPD.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260330105637.130189-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The FCPVD block on the RZ/G3L SoC is identical to the one found on the
RZ/G2L SoC. Document RZ/G3L FCPVD IP.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260330110012.131273-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The YUV24 format is missing an entry in the v4l2_format_info().
The YUV24 format is the packed YUV 4:4:4 formats with 8 bits
per component.
Fixes: 0376a51fbe ("media: v4l: Add packed YUV444 24bpp pixel format")
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The function hantro_run() is declared but never defined nor used, remove
the dangling declaration.
Signed-off-by: Rouven Czerwinski <rouven.czerwinski@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If V4L2 device fails to register, then SRAM still be claimed and as a
result driver will not be able to probe again.
cedrus 1c0e000.video-codec: Failed to claim SRAM
cedrus 1c0e000.video-codec: Failed to probe hardware
cedrus 1c0e000.video-codec: probe with driver cedrus failed with error -16
cedrus_hw_remove undoes everything that was previously done by
cedrus_hw_probe, such as disabling runtime power management and
releasing the claimed SRAM and reserved memory region.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Acked-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
According to the documentation struct v4l2_fh has to be cleaned up with
v4l2_fh_exit() before being freed. [1]
Currently there is no actual bug here, when v4l2_fh_exit() isn't called.
v4l2_fh_exit() in this case only destroys internal mutex. But it may
change in the future, when v4l2_fh_init/v4l2_fh_exit will be enhanced.
1. https://docs.kernel.org/driver-api/media/v4l2-fh.html
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Cc: stable@vger.kernel.org
Acked-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
handle_dynamic_resolution change requires that the state_lock be acquired
based on the lockdep_assert_held. However, the
handle_dynamic_resolution_change call in initialize_sequence does not
properly obtain the lock before calling.
Since the v4l2_ctrl_find and s_ctrl can sleep, they should not be called
while a lock is already held. Store off the fbc_buf_count then properly
update control once lock has been freed.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Tested-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Possible use after free if IRQ thread manages to obtain spinlock between
m2m_ctx release and wave5_release function removing stream instance from
list of active instances. The IRQ thread looks for the m2m_ctx which is
freed so null pointer dereference occurs.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The VDPU383 support for hevc and h264 use structs with bitfields to
represent the SPS and PPS.
Because the fields are mostly unaligned and numerous, it brings compiler
issues, especially with clang.
To prevent that, switch to using the global bitwriter previously
introduced instead.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Currently, the common code files for hevc and h264 use structs with
bitfields to represent the HW RPS buffer.
Because the bitfields are mostly unaligned and numerous, it brings compiler
issues, especially with clang.
To prevent that, switch to using the global bitwriter previously
introduced instead.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Both rkvdec-h264.c and rkvdec-hevc.c use their own bitwriter
function and macros.
Move to using the global one introduced before.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The use of structures with bitfields is good when the values are
somewhat aligned.
More mis-alignement means that compilers need to do more gymnastics
to edit the fields values.
Some cases have been reported with CLang on specific architectures
like armhf and hexagon, where the compiler would allocate a bigger
local stack than needed or even completely freeze during compilation.
Some fixes have been provided to ease the issues, but the real fix
here is to use a bitwriter instead of heavily unaligned bitfields.
This is a preparation commit to provide a global bitwriter interface
for the whole driver.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some pixel formats can only be produced if the decoder outputs
reference pictures directly. In some cases, such as AV1 film-grain,
the use of the post-processor is strictly required. In this case,
only enumerate the post-processor supported formats. The exception is
when V4L2_FMTDESC_FLAG_ENUM_ALL is set, in this case, we enumerate
everything regardless of the state.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: bcd4f091cf ("media: verisilicon: Use V4L2_FMTDESC_FLAG_ENUM_ALL flag")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Wave5 encoder is capable of reading in numerous raw pixel formats.
Expose these formats and properly configure encoder if selected.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Constrained Baseline Profile (CBP) and Baseline Profile (BP) have been
treated as the same.
Introduce the ability to differentiate between the two.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Implement V4L2_CID_MPEG_VIDEO_BACKGROUND_DETECTION in the Wave5 encoder
driver. When enabled, the hardware detects background regions in a frame
and uses fewer bits or skip mode to encode them, reducing bitrate for
streams with stationary scenes.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a generic V4L2 boolean control V4L2_CID_MPEG_VIDEO_BACKGROUND_DETECTION
that allows encoders to detect background regions in a frame and use fewer
bits or skip mode to encode them, potentially reducing bitrate for streams
with stationary scenes.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
During encoder processing, there is a case where the IRQ response could
return the buffer back to userspace via v4l2_m2m_buf_done call. In this
time, userspace could queue up this same buffer before start_encode removes
the index from the ready queue. This would then lead to a case where the
buffer in the ready queue could be a self loop due to the
WRITE_ONCE(prev->next, new) call in __list_add.
When __list_del is finally called, the loop is already made so nothing
points back to ready queue list head and pointers are poisoned.
A buffer should not be marked as DONE before the buffer is removed from
m2m ready queue. Move removal entirely to finish_encode.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Tested-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Since a recent fix the mtk_jpeg_release function cancels any pending
or running work present in the driver workqueue using
cancel_work_sync function.
Currently, only the multicore based variants use this workqueue and they
have the jpeg_worker platform data field initialized with a workqueue
callback function. For the others, this field value remain NULL by
default.
The cancel_work_sync function is unconditionally called in
mtk_jpeg_release function, even for the variants that do not use the
workqueue. This call generates a WARN_ON print in __flush_work because
the workqueue callback function presence check fails in __flush_work
function (used by cancel_work_sync).
So, to avoid these warnings, call cancel_work_sync only if a workqueue
callback is defined in platform data.
Fixes: 34c519feef ("media: mtk-jpeg: fix use-after-free in release path due to uncancelled work")
Cc: stable@vger.kernel.org
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Allwinner video engine sits behind the MBUS that is represented as
an interconnect.
Make sure that the interconnect properties are valid in the binding.
Fixes: d41662e52a ("media: dt-bindings: media: allwinner,sun4i-a10-video-engine: Add R40 compatible")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Cedrus consumes H.264 ref_pic_list0/ref_pic_list1 entries from the
stateless slice control and later uses their indices to look up
decode->dpb[] in _cedrus_write_ref_list().
Rejecting such controls in cedrus_try_ctrl() would break existing
userspace, since stateless H.264 reference lists may legitimately carry
out-of-range indices for missing references. Instead, guard the actual
DPB lookup in Cedrus and skip entries whose indices do not fit the fixed
V4L2_H264_NUM_DPB_ENTRIES array.
This keeps the fix local to the driver use site and avoids out-of-bounds
reads from malformed or unsupported reference list entries.
Fixes: e000e1fa4b ("media: uapi: h264: Update reference lists")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
HEVC slice parameters are shared stateless V4L2 controls, but the common
validation path does not verify the active L0/L1 reference counts before
driver-specific code consumes them.
The original report came from Cedrus, but the active count bounds are
not Cedrus-specific. Validate them in the common HEVC slice control path
so stateless HEVC drivers get the same basic guarantees as soon as the
control is queued.
Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may
use out-of-range sentinel values such as 0xff for missing references, and
some hardware can use that information for concealment. Keep this common
check limited to the active reference counts.
Fixes: d395a78db9 ("media: hevc: Add decode params control")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
feature_data is defined as __s16 in the header.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----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=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----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=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
