This really is the same device as covered by iwl_cfg_bz,
just the discrete version. Since discrete vs integrated
is handled in the transport config, there's no need to
have both. Remove iwl_cfg_gl.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.fbb78183dc85.Ic5429009677ae1023cf1f43a655e90409a30c493@changeid
This was used in some really old devices, and then got
carried forward to Qu devices, even though on those we
don't need it at all since the TX aggregation start is
offloaded to the firmware. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.9c2689e2ca8e.I8274b29ca64d9ef9d1e357bbe34ca3a4b97aeb7a@changeid
Now that the fw_name_mac is no longer around and derived
from the MAC type automatically, we no longer need to have
different configurations for Qu/QuZ. Combine them. For the
killer AX1650s/i, also fix the names, there was a mixup.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250502151751.957fbb5437ce.If51ad0b2c8afaaa131208125af3bc292793613bb@changeid
This was used in the past for NoA and/or beacon filter
testing, but these days everything is tested via debugfs
or special FW commands, so remove the testmode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430155443.751018e0ed8e.I21557a9a3d57234187f1b0b2182a1714ecc66b9a@changeid
When a soft AP is started, it may not use the full configured
bandwidth (e.g. if no station is connected). As a result, the
responder will not support the configured bandwidth. Since the
responder supports ranging with unassociated stations, there is
no indication to the driver when the full bandwidth should be enabled.
Fix it by configuring the AP to always use the full bandwidth when a
responder is supported.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430155443.620fe8099fff.Id50675f4d4c524b0a7ee602c48af538a327010e0@changeid
When a channel context is added, it is still not assigned to the link
and the link is not yet active. As a result, the channel context
min_def is used when the AP is started, even when the full bandwidth
should be used.
Fix it by updating the PHY channel context when the link is already
active so the full bandwidth is used when needed.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430155443.30b043b10fb1.I62c2aa58687e4796b759fa68132122119a337b49@changeid
This version fixes the issue that was worked around by
iwl_mvm_smps_workaround. So for FWs with the new version don't do the
workaround, and set new bit added in this version when appropriate.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250430155443.5c9a0181a84b.I9a03bc07a7b3f6e37cc1c0c1af5719e765a05897@changeid
Implement TOP reset (new in the SC family), which resets much
of the (shared) hardware without resetting the bus interfaces.
Use it to recover from TOP fatal error, or if manually used;
we'll need to add using it for FSEQ updates later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430155443.12f38024a3b4.I9c22f6c4f6de64f3b34ccd898370ec1859ab7dbf@changeid
This version fixes the issue that was worked around by
iwl_mld_smps_wa. So for FWs with the new version don't do the
workaround, and set new bit added in this version when appropriate.
While at it, rename iwl_mld_smps_wa to iwl_mld_smps_workaround.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250430155443.77fdb18d1ee0.I93688612ac4f6ec99da9bc54bee16554ef40a40b@changeid
PPAG command version 7 will send exact data read from BIOS to
firmware without filtering/altering BIOS data. This enables the
driver to become purely a pipe for this feature.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.88ed7b2cadef.Iad78f6cec617d1f111b704352795dde81af71a99@changeid
ppag_ver variable is holding PPAG BIOS revision but name misleading
as PPAG command API version, So rename to ppag_bios_rev.
This will improve code readability but doesn't alter behaviour.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.be51850947df.If81d88cd2d38299faf1e2a3db5efbc021650f907@changeid
If iwl_mld_change_vif_links failed to add the requested link(s)
because the FW is dead (error before recovery), there is no point
in returning an error value, as the reconfig will re-add the link(s)
after the FW is started.
Return 0 in that case, and WARN in the others.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250430151952.c549c72b1f37.I445bf723e9befc9541b4abd0ec7c72db8f1ff177@changeid
When BT is ON, EMLSR with one of the links operating on 2.4 GHz
is allowed only if it meets following conditions.
In this patch:
1. during link selection, when BT is ON, allow emlsr only if BT
pentalty is < 7%.
2. exit EMLSR if BT is turned ON and one of the links is operating
on 2.4 GHz with BT penalty > 7%
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.d30212ec3901.I48e3d5bd6b0b8583f98057c38d2ee30fff5abd8a@changeid
For the upcoming SC hardware, a new reset mode "(silent) TOP
reset" will be available. When BT initiates that reset, it'll
negotiate with the WiFi firmware which makes it appear to the
driver as the reset interrupt. To distinguish it from all the
other reasons for the reset interrupt, there's (now) a status
field in CSR 0x110.
Implement the part of TOP reset where we react to BT doing it.
This requires disambiguating the interrupt, depending on the
state of the device, since we can even get TOP reset from BT
while waiting for the reset handshake.
If TOP reset is done by BT while we're not trying to do reset
anyway, then simply reprobe, since we cannot keep the state
of the device as it's being reset, after waiting the needed
180ms to let the device reset/settle.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.fb86bfbdca40.Ibe40bf54003e3f8929b671324a395e76eb64a4d8@changeid
When a restart is in progress, it can be async due to the next
worker being scheduled in mac80211 (restart work) or the driver
itself (reprobe). Avoid scheduling another restart during this
period.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.db428503ec3c.I3f2be3d72a9d40cfb4e697cdab1cd2866a9262bc@changeid
Generalize and extend the link pair tests to not just do
channel load checks, but generally check link pairs. To
enable more accurate checking, return the reasons bitmap
from iwl_mld_valid_emlsr_pair() and therefore rename it
to iwl_mld_emlsr_pair_state.
It's also necessary now to add more chandefs, and while
doing so fix the existing ones to be valid and add a
test to check they really are valid.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.1f7c4ac75c6d.I69d68359e02d99632e95daba3d126115dce167b3@changeid
We are currently reading it only from ACPI, but we need to read it from
UEFI too (if exists, and if the UEFI variables are locked)
Add the reading from the UEFI and use IWL_BIOS_TABLE_LOADER to generate
the code that determines the source from which the table should be read
(ACPI/UEFI).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250430151952.839a5e7dd89b.I491acbf68047874df97b3971f1ba692ebc998a52@changeid
IWL_BIOS_TABLE_LOADER generates the code that determines from what source
to read a BIOS table (ACPI or UEFI).
As we want to read WPFC from UEFI to, iwl_acpi_get_phy_filters needs to
have the prototype that is required by this macro:
receive fwrt and return a int on success/failure.
Do that.
This allowes us to make to version of iwl_acpi_get_phy_filters for non
ACPI builds back to an iniline function.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20250430151952.8046a2db775b.Ifbcf4168183d3cd635e3e800ec7ecd903e57d361@changeid
The kernel-doc script flagged the following:
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h:130: warning: missing initial short description on line:
* enum iwl_power_scheme
1 warnings as Errors
Add a short description to address this warning.
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250319-iwl_power_scheme-kdoc-v1-1-2033ae38b178@oss.qualcomm.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
This reverts commit b6abf63ed7.
This is causing major merge conflicts with the changes in
wireless, where we reverted some changes. Revert this for
now to avoid having to solve that problem. We can redo it
on top of wireless-next with wireless merged back later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
phy_filters holds the values as read from WFPC BIOS table.
Since also iwlmld is going to need it, move it to fw_runtime.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.357baa65950a.I01d22328b4c381d4c0064ad9bd36750911157f90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rxq->read is accessed without the rxq->lock in a few places,
Make sure to have the lock there.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.73725f207aaa.I1a3e4b6c5fd370e029fdacfcdc9ee335788afa98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This version has a new flag bit that indicates whether or not SMPS is
allowed for the MAC.
This only adds the API, the actual support will be done in other
patches.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.991ff01b8d16.Id0aa4061d7926753b03a13bf94ec1ac9e1d18745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The IWL_DEV_INFO() macro has far too many arguments, and most
of the time they're just "ANY". Use C99 initializers in the
macro to clean that up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.877b65b940b5.Ic3a40afcd182b6e1802bb8f8a1a845b20608e328@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move some code that's only done when having received data out
of iwl_mld_rx_fill_status() and remove the two arguments that
are related to that. This simplifies the function for the no-
data case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.77010d6a6694.I2fd06b073460717d324245482110cb0381218526@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
