Use guard(mutex)() to automatically release the lock on scope exit,
simplifying the error handling path and removing the need for
explicit unlock and goto-based cleanup.
Signed-off-by: Guilherme Dias <guilhermeabreu200105@usp.br>
Co-developed-by: João Paulo Menezes Linaris <jplinaris@usp.br>
Signed-off-by: João Paulo Menezes Linaris <jplinaris@usp.br>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the drivers already have this correctly placed, so adjust
the missing ones. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Convert the hardcoded count parameter to sizeof(buf) for all
regmap_bulk_write() and regmap_bulk_read() calls in this driver
to improve code maintainability. For details, see [1].
Link: https://lore.kernel.org/all/20260428192213.7c5c80e5@jic23-huawei/ #[1]
Signed-off-by: Miao Li <limiao@kylinos.cn>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace the uint32_t type members in struct stk3310_data with u32
to adhere to the unified kernel coding style, and reorder the member
variables to eliminate memory padding holes.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Miao Li <limiao@kylinos.cn>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
On the Inspur HS326 laptop(which integrated with HiSilicon M900
processor), if the STK3311-X chip's PS interrupt is configured
in "Recommended interrupt mode", the interrupt cannot be triggered
normally after waking from suspend or hibernation.
In this case, neither disabling and re-enabling the interrupt nor
resetting the PS threshold register can restore the interrupt to
normal operation.
If the interrupt is disabled in suspend() then reset the PS threshold
register and enable the interrupt in resume(). This resolves the issue.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Two comments incorrectly refer to 'AD9843' instead of 'AD9834'.
Fix the copy-paste typo.
Signed-off-by: Angus Gardner <angusg778@gmail.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace open-coded dev_err() + return sequences with dev_err_probe(),
which is the preferred pattern for probe error paths as it handles
deferred probing correctly and reduces boilerplate.
Convert all three remaining instances in ad9834_probe():
- master clock enable failure
- device init SPI sync failure
The avdd regulator path already used dev_err_probe().
Signed-off-by: Angus Gardner <angusg778@gmail.com>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use up to date address. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Clean up the included headers in stk3310.c according to the
Include-What-You-Use (IWYU) tool. Remove the generic <linux/kernel.h>
header and add explicit dependencies to improve compilation accuracy.
Co-developed-by: Felipe Khoury Dayoub <felipedayoub@usp.br>
Signed-off-by: Felipe Khoury Dayoub <felipedayoub@usp.br>
Signed-off-by: Rafael G. Dias <rafael.guimaraes.dias@usp.br>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Sort the included headers alphabetically and group the <linux/iio/*>
headers separately from the generic <linux/*> headers.
Co-developed-by: Felipe Khoury Dayoub <felipedayoub@usp.br>
Signed-off-by: Felipe Khoury Dayoub <felipedayoub@usp.br>
Signed-off-by: Rafael G. Dias <rafael.guimaraes.dias@usp.br>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Refactor the ad9832_calc_freqreg by removing the redundant u64 casts
and 1L bitwise left shift and replacing the multiplication by a bit
shift, as multiplying integers by a power of two is identical to a
bitwise left shift.
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio_push_to_buffers_with_ts_unaligned() uses int64_t for timestamp.
Move it from int64_t to s64 to make consistent with:
- iio_push_to_buffers_with_ts()
- all current users that supply s64 anyway
This will reduce potential of wrong type being chosen when using
this API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace leading spaces with tabs in the of_device_id table
entries to comply with kernel coding style.
Signed-off-by: Rahman Mahmutović <mahmutovicrahman5@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the Analog Devices AD5706R, a 4-channel 16-bit
current output digital-to-analog converter with SPI interface.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add device tree binding documentation for the Analog Devices
AD5706R 4-channel 16-bit current output digital-to-analog converter.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
clamp() expects compatible operand types. The period calculation uses
nanosecond constants, while the local target variable was narrower than
the upper bound expression.
Make target unsigned long and use unsigned long bounds, including
NSEC_PER_USEC for the upper limit. This keeps the operands naturally
aligned without adding casts.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the AD4880, a dual-channel 20-bit 40MSPS SAR ADC with
integrated fully differential amplifiers (FDA).
The AD4880 has two independent ADC channels, each with its own SPI
configuration interface. The driver uses spi_new_ancillary_device() to
create an additional SPI device for the second channel, allowing both
channels to share the same SPI bus with different chip selects.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the AD4880, a dual-channel 20-bit 40MSPS SAR ADC
with integrated fully differential amplifiers (FDA).
The AD4880 has two independent ADC channels, each with its own SPI
configuration interface. This requires:
- Two entries in reg property for primary and secondary channel
chip selects
- Two io-backends entries for the two data channels
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a new function to get an IIO backend by its index in the
io-backends device tree property. This is useful for multi-channel
devices that have multiple backends, where looking up by index is
more straightforward than using named backends.
Extract __devm_iio_backend_fwnode_get_by_index() from the existing
__devm_iio_backend_fwnode_get(), taking the index directly as a
parameter. The new public API devm_iio_backend_get_by_index() uses
the index to find the backend reference in the io-backends property,
avoiding the need for io-backend-names.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The mount-matrix property supplies a 3x3 matrix that is used
to transform the values from the gyroscope to get vector
values that are relative to the way the sensor has been mounted
on the device. When the property is not specified, the identity
matrix is used.
This change adds mount-matrix as an optional property to the
dt-bindings for the bmg160 gyroscope.
Signed-off-by: Vishwas Rajashekar <vishwas.dev@vrajashkr.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The APDS990x driver in misc lacks DeviceTree support, and no mainline
pre-DT board files configured this device using apds990x_platform_data.
This driver belongs to a legacy group of ambient light sensor drivers in
drivers/misc/ that predates the migration to DT and the standard IIO ABI.
Since the Avago APDS9900/9901 ALS/Proximity sensor is now supported by
the tsl2772 IIO driver and there are no active users in the kernel tree,
remove this old implementation.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The Avago APDS9900/9901 has a similar register layout to the
TAOS/AMS TSL2772 but features a unique set of configurations. Add support
for the APDS9900/9901 into the TSL2772 driver by adding the required
device-specific configurations.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace sprintf() function calls with sysfs_emit() and
sysfs_emit_at(). While the current code is fine, sysfs_emit() is
preferred over sprintf(), and will help modernize the driver.
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Correct inconsistent indentation in the example and use consistent 4-space
indentation.
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace minItems/maxItems with minimum/maximum to describe the reg
property as a single channel number with 8 possible values (0-7)
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Change example reg value from 0 to 0x60 in order to use a valid I2C address
Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace open-coded mutex_lock/unlock pairs with the cleanup-based
guard() and scoped_guard() helpers in ad7280a_write_thresh(),
ad7280_show_balance_timer(), ad7280_store_balance_sw(),
ad7280_store_balance_timer() and ad7280_read_raw().
This removes the need for the err_unlock label and explicit
mutex_unlock() calls, as the lock is now automatically released
when the function returns or the guarded scope exits, regardless
of the exit path.
Signed-off-by: Lucas Ivars Cadima Ciziks <lucas@ciziks.com>
Co-developed-by: Matheus Giarola <matheusgiarola@usp.br>
Signed-off-by: Matheus Giarola <matheusgiarola@usp.br>
Co-developed-by: Felipe Ribeiro de Souza <felipers@usp.br>
Signed-off-by: Felipe Ribeiro de Souza <felipers@usp.br>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Extract the upper and lower bytes of chan->address into named local
variables devaddr and ch across ad7280_read_raw(),
ad7280_show_balance_timer() and ad7280_store_balance_timer() to improve
readability and avoid inline bit manipulation in function calls.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Lucas Ivars Cadima Ciziks <lucas@ciziks.com>
Co-developed-by: Matheus Giarola <matheusgiarola@usp.br>
Signed-off-by: Matheus Giarola <matheusgiarola@usp.br>
Co-developed-by: Felipe Ribeiro de Souza <felipers@usp.br>
Signed-off-by: Felipe Ribeiro de Souza <felipers@usp.br>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for AD4129-4/8, AD4130-4, and AD4131-4/8 variants.
The AD4129 series supports the same FIFO interface as the AD4130 but with
reduced resolution (16-bit). The AD4131 series lacks FIFO support, so
triggered buffer functionality is introduced.
The 4-channel variants feature fewer analog inputs, GPIOs, and sparse pin
mappings for VBIAS, analog inputs, and excitation currents. The driver now
handles these differences with chip-specific configurations, including pin
mappings and GPIO counts.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Introduce a chip_info structure to abstract device-specific parameters
and prepare the driver for supporting multiple AD4130 family variants.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add SPI device ID table to enable non-device tree based device binding.
The id_table provides a fallback matching mechanism when of_match_table
cannot be used, which is required for proper SPI driver registration.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace mutex_lock()/mutex_unlock() pair with guard(mutex)()
and move the lock into ads7924_get_adc_result(). Keeping the guard
in the helper makes the locking scope match the operation being protected.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add i2c_device_id table to support legacy I2C instantiation.
Update probe to use i2c_get_match_data() so device data can be
retrieved consistently for both OF and legacy I2C instantiation.
Signed-off-by: Kevin Tung <kevin.tung.openbmc@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use 'u32' instead of bare 'unsigned' to resolve checkpatch.pl warnings
and correct type use as defined in the struct hid_sensor_hub_callbacks.
No functional change.
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Both ad4170_gpio_direction_input() and
ad4170_gpio_direction_output() duplicate the same switch
statement to map a GPIO offset to its corresponding mask.
Replace the switch with a static lookup table, simplifying the code
and avoiding duplication. This also makes future extensions easier.
No functional change intended.
Signed-off-by: Guilherme Ivo Bozi <guilherme.bozi@usp.br>
Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Extend binding support for AD4129-4/8, AD4130-4, and AD4131-4/8 ADC
variants.
Dropped a reference to driver in the binding whilst here.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The Data Ready/FIFO interrupt has a special behavior that inverts the
IRQ polarity when devices with FIFO support enter FIFO mode, while using
normal polarity for data ready.
Document the interrupts property to clarify this special behavior for
users.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use field_get() here now that runtime-mask support exists, and drop
the obsolete TODO. Since NXP_SAR_ADC_EOC_CH(c) is BIT(c), the
resulting !-test is semantically identical.
No functional change.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Acked-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use field_get() for the per-channel DAC power-down bit instead of an
open-coded mask-and-shift sequence.
No functional change.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
