Add dt bindings for AD7779 8-channel, simultaneous sampling ADC
family with eight full Σ-Δ ADCs on chip and ultra-low input
current to allow direct sensor connection.
Signed-off-by: Ramona Alexandra Nechita <ramona.nechita@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20241014143204.30195-2-ramona.nechita@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- Basic support for iio backend.
- Supports IIO_CHAN_INFO_SAMP_FREQ R/W.
- Only hardware mode is available, and that IIO_CHAN_INFO_RAW is not
supported if iio-backend mode is selected.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-7-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This variable determines how many hardware channels has the chip,
oppositely to the num_channels that can contain more channels, e.g a
timestamp channel in our case. Introducing this variable avoids
decreasing the former num_channels variable when reading the ADC's
channels, and clarifies a bit the code.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-6-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On the parallel version, the current implementation is only compatible
with id tables and won't work with fw_nodes, this commit intends to fix
it.
Doing so required to declare ad7606_chip_info structures in the .h file
so to make them accessible to all the driver files that can set a
pointer to the corresponding chip as the driver data.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-5-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Until now, the conversion were triggered by setting high the GPIO
connected to the convst pin. This commit gives the possibility to
connect the convst pin to a PWM.
Connecting a PWM allows to have a better control on the samplerate,
but it must be handled with care, as it is completely decorrelated of
the driver's busy pin handling.
Hence it is not recommended to be used "as is" but must be exploited
in conjunction with IIO backend, and for now only a mock functionality
is enabled, i.e PWM never swings, but is used as a GPIO, i.e duty_cycle
== period equals high state, duty_cycle == 0 equals low state.
This mock functionality will be disabled after the IIO backend usecase
is introduced.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-4-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Analog Devices Inc. AD7606 (and similar chips) are complex ADCs that
will benefit from a detailed driver documentation.
This documents the current features supported by the driver.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-3-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the required properties for iio-backend support, as well as an
example and the conditions to mutually exclude interruption and
conversion trigger with iio-backend.
The iio-backend's function is to controls the communication, and thus the
interruption pin won't be available anymore.
As a consequence, the conversion pin must be controlled externally since
we will miss information about when every single conversion cycle (i.e
conversion + data transfer) ends, hence a PWM is introduced to trigger
the conversions.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-2-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The documentation is erroneously stating that spi-cpha is required, and
the example is erroneously setting both spi-cpol and spi-cpha. According
to the datasheet, only cpol should be set.
On zedboard for instance, setting the devicetree as in the example will
simply not work.
Fixes: 416f882c3b ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml")
Fixes: 6e33a125df ("dt-bindings: iio: adc: Add docs for AD7606 ADC")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Link: https://patch.msgid.link/20241015-ad7606_add_iio_backend_support-v5-1-654faf1ae08c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make use of mutex guard() and IIO iio_device_claim_direct_scoped() to
simplify code and error handling.
While at it, use devm_mutex_init() to initialize the mutex.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241016-dev-ad74413r-minor-improv-v1-3-13c9c769237d@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It's highly unlikely for the converter ref voltage to change at runtime.
Hence, let's read the voltage and save it (instead of the regulator
struct). While at it, simplify the code by using
devm_regulator_get_enable_read_voltage().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241016-dev-ad74413r-minor-improv-v1-2-13c9c769237d@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We just need the reset gpio during probe so there's no need to keep it
in our state struct. Hence, move devm_gpiod_get_optional() into
ad74413r_reset() and use a local struct gpio_desc.
While at it, request the gpio in the asserted state (GPIOD_OUT_HIGH) so
that we already perform the reset while requesting the gpio saving us a
call to gpiod_set_value_cansleep().
Also, explicitly include <gpio/consumer.h> for
devm_gpiod_get_optional().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241016-dev-ad74413r-minor-improv-v1-1-13c9c769237d@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Define the integration time within the configuration register as a field
to easy its handling as an index, preparing the driver to support
configurable integration times.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241017-veml6070-integration-time-v1-2-3507d17d562a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit intends to add the old BMP085 sensor to the new IRQ interface
of the driver for consistence. No functional changes intended.
The BMP085 sensor is equivalent with the BMP180 with the only difference of
BMP085 having an extra interrupt pin to inform about an End of Conversion.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241017233022.238250-5-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The BMP3xx and BMP5xx sensors have an interrupt pin which can be used as
a trigger for when there are data ready in the sensor for pick up.
This use case is used along with NORMAL_MODE in the sensor, which allows
the sensor to do consecutive measurements depending on the ODR rate value.
The trigger pin can be configured to be open-drain or push-pull and either
rising or falling edge.
No support is added yet for interrupts for FIFO, WATERMARK and out of range
values.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241017233022.238250-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add forced mode support in sensors BMP28x, BME28x, BMP3xx and BMP58x.
Sensors BMP18x and BMP085 are old and do not support this feature so
their operation is not affected at all.
Essentially, up to now, the rest of the sensors were used in normal mode
all the time. This means that they are continuously doing measurements
even though these measurements are not used. Even though the sensor does
provide PM support, to cover all the possible use cases, the sensor needs
to go into sleep mode and wake up whenever necessary.
The idea is that the sensor is by default in sleep mode, wakes up in
forced mode when a oneshot capture is requested, or in normal mode
when the buffer is enabled. The difference lays in the fact that in
forced mode, the sensor does only one conversion and goes back to sleep
while in normal mode, the sensor does continuous measurements with the
frequency that was set in the ODR registers.
The bmpX_chip_config() functions which are responsible for applying
the requested configuration to the sensor, are modified accordingly
in order to set the sensor by default in sleep mode.
DEEP STANDBY, Low Power NORMAL and CONTINUOUS modes, supported only by
the BMP58x version, are not added.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241017233022.238250-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The adis16136 driver also supports the adis16137 model, but it is not
mentioned in the Kconfig help. Add it to the description in Kconfig.
Signed-off-by: Yo-Jung Lin (Leo) <0xff07@gmail.com>
Link: https://patch.msgid.link/20241019034213.429464-1-0xff07@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The commits in question do not proove that ACPI IDs exist.
Quite likely it was a cargo cult addition while doing that
for DT-based enumeration. Drop most likely fake ACPI IDs.
The to be removed IDs has been checked against the following resources:
1) DuckDuckGo
2) Google
3) MS catalog: https://www.catalog.update.microsoft.com/Search.aspx
This gives no useful results in regard to DSDT, moreover, the official
vendor IDs in the registry for Bosh are BSG and BOSC.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241018145805.2181682-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The commits in question do not proove that ACPI IDs exist.
Quite likely it was a cargo cult addition while doing that
for DT-based enumeration. Drop most likely fake ACPI IDs.
The to be removed IDs has been checked against the following resources:
1) DuckDuckGo
2) Google
3) MS catalog: https://www.catalog.update.microsoft.com/Search.aspx
This gives no useful results in regard to DSDT, moreover, the official
vendor IDs in the registry for Bosh are BSG and BOSC.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241018145732.2181309-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
add the iio driver for bosch imu smi240. The smi240 is a combined
three axis angular rate and three axis acceleration sensor module
with a measurement range of +/-300°/s and up to 16g. A synchronous
acc and gyro sampling can be triggered by setting the capture bit
in spi read command.
Implemented features:
* raw data access for each axis through sysfs
* tiggered buffer for continuous sampling
* synchronous acc and gyro data from tiggered buffer
Signed-off-by: Shen Jianping <Jianping.Shen@de.bosch.com>
Link: https://patch.msgid.link/20241018135234.5446-3-Jianping.Shen@de.bosch.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
add devicetree binding for Bosch imu smi240.
The smi240 is a combined three axis angular rate and
three axis acceleration sensor module.
* The smi240 requires VDD and VDDIO
* Provides only spi interface.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shen Jianping <Jianping.Shen@de.bosch.com>
Link: https://patch.msgid.link/20241018135234.5446-2-Jianping.Shen@de.bosch.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- ISO: Fix multiple init when debugfs is disabled
- Call iso_exit() on module unload
- Remove debugfs directory on module init failure
- btusb: Fix not being able to reconnect after suspend
- btusb: Fix regression with fake CSR controllers 0a12:0001
- bnep: fix wild-memory-access in proto_unregister
-----BEGIN PGP SIGNATURE-----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=k8sF
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Pull bluetooth fixes from Luiz Augusto Von Dentz:
- ISO: Fix multiple init when debugfs is disabled
- Call iso_exit() on module unload
- Remove debugfs directory on module init failure
- btusb: Fix not being able to reconnect after suspend
- btusb: Fix regression with fake CSR controllers 0a12:0001
- bnep: fix wild-memory-access in proto_unregister
Note: normally the bluetooth fixes go through the networking tree, but
this missed the weekly merge, and two of the commits fix regressions
that have caused a fair amount of noise and have now hit stable too:
https://lore.kernel.org/all/4e1977ca-6166-4891-965e-34a6f319035f@leemhuis.info/
So I'm pulling it directly just to expedite things and not miss yet
another -rc release. This is not meant to become a new pattern.
* tag 'for-net-2024-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001
Bluetooth: bnep: fix wild-memory-access in proto_unregister
Bluetooth: btusb: Fix not being able to reconnect after suspend
Bluetooth: Remove debugfs directory on module init failure
Bluetooth: Call iso_exit() on module unload
Bluetooth: ISO: Fix multiple init when debugfs is disabled
- Fix two error paths and a missing semicolon in the
Intel driver.
- Add a missing ACPI ID for the Intel Panther Lake.
- Check return value of devm_kasprintf() in the Apple
and STM32 drivers.
- Add a missing mutex_destroy() in the aw9523 driver.
- Fix a double free in cv1800_pctrl_dt_node_to_map()
in the Sophgo driver.
- Fix a double free in ma35_pinctrl_dt_node_to_map_func()
in the Nuvoton driver.
- Fix a bug in the Ocelot interrupt handler making the
system hang.
-----BEGIN PGP SIGNATURE-----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=uwk3
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Mostly error path fixes, but one pretty serious interrupt problem in
the Ocelot driver as well:
- Fix two error paths and a missing semicolon in the Intel driver
- Add a missing ACPI ID for the Intel Panther Lake
- Check return value of devm_kasprintf() in the Apple and STM32
drivers
- Add a missing mutex_destroy() in the aw9523 driver
- Fix a double free in cv1800_pctrl_dt_node_to_map() in the Sophgo
driver
- Fix a double free in ma35_pinctrl_dt_node_to_map_func() in the
Nuvoton driver
- Fix a bug in the Ocelot interrupt handler making the system hang"
* tag 'pinctrl-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: fix system hang on level based interrupts
pinctrl: nuvoton: fix a double free in ma35_pinctrl_dt_node_to_map_func()
pinctrl: sophgo: fix double free in cv1800_pctrl_dt_node_to_map()
pinctrl: intel: platform: Add Panther Lake to the list of supported
pinctrl: aw9523: add missing mutex_destroy
pinctrl: stm32: check devm_kasprintf() returned value
pinctrl: apple: check devm_kasprintf() returned value
pinctrl: intel: platform: use semicolon instead of comma in ncommunities assignment
pinctrl: intel: platform: fix error path in device_for_each_child_node()
Here are a number of small char/misc/iio driver fixes for 6.12-rc4.
Included in here are the following:
- loads of small iio driver fixes for reported problems
- parport driver out-of-bounds fix
- Kconfig description and MAINTAINERS file updates
All of these, except for the Kconfig and MAINTAINERS file updates have
been in linux-next all week. Those other two are just documentation
changes and will have no runtime issues and were merged on Friday.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZxUGYg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynTCQCggBy+iX/11utliIaNKD2PHkB5BjQAn1igXYZI
hgWphEoTvBtVgGfOzNwt
=0mak
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fixes from Greg KH:
"Here are a number of small char/misc/iio driver fixes for 6.12-rc4:
- loads of small iio driver fixes for reported problems
- parport driver out-of-bounds fix
- Kconfig description and MAINTAINERS file updates
All of these, except for the Kconfig and MAINTAINERS file updates have
been in linux-next all week. Those other two are just documentation
changes and will have no runtime issues and were merged on Friday"
* tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (39 commits)
misc: rtsx: list supported models in Kconfig help
MAINTAINERS: Remove some entries due to various compliance requirements.
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP device
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM device
parport: Proper fix for array out-of-bounds access
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
iio: adc: ad4695: Add missing Kconfig select
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
...
Here are some small tty and serial driver fixes for 6.12-rc4. Included
in here are:
- qcom-geni serial driver fixes, wow what a mess of a UART chip that
thing is...
- vt infoleak fix for odd font sizes
- imx serial driver bugfix
- yet-another n_gsm ldisc bugfix, slowly chipping down the issues in
that piece of code.
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZxUGDQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymS+ACfQaKXHHy0WZ/kB22Eif7KgKsx+D0AnjxH+H5l
knORLhrVW+V41wyk9QM/
=qbdY
-----END PGP SIGNATURE-----
Merge tag 'tty-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.12-rc4:
- qcom-geni serial driver fixes, wow what a mess of a UART chip that
thing is...
- vt infoleak fix for odd font sizes
- imx serial driver bugfix
- yet-another n_gsm ldisc bugfix, slowly chipping down the issues in
that piece of code
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: rename suspend functions
serial: qcom-geni: drop unused receive parameter
serial: qcom-geni: drop flip buffer WARN()
serial: qcom-geni: fix rx cancel dma status bit
serial: qcom-geni: fix receiver enable
serial: qcom-geni: fix dma rx cancellation
serial: qcom-geni: fix shutdown race
serial: qcom-geni: revert broken hibernation support
serial: qcom-geni: fix polled console initialisation
serial: imx: Update mctrl old_status on RTSD interrupt
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
vt: prevent kernel-infoleak in con_font_get()
Here are some small USB driver fixes and new device ids for 6.12-rc4.
Included in here are:
- xhci driver fixes for a number of reported issues
- new usb-serial driver ids
- dwc3 driver fixes for reported problems.
- usb gadget driver fixes for reported problems
- typec driver fixes
- MAINTAINER file updates
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZxUHDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykYGACgvHkvAFkhaCeJKubX4cso1BAM+60AoMrkdNyB
aNAH0Zn2IoZOfRjHWit6
=sHyY
-----END PGP SIGNATURE-----
Merge tag 'usb-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.12-rc4:
- xhci driver fixes for a number of reported issues
- new usb-serial driver ids
- dwc3 driver fixes for reported problems.
- usb gadget driver fixes for reported problems
- typec driver fixes
- MAINTAINER file updates
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 MBIM compositions
USB: serial: option: add support for Quectel EG916Q-GL
xhci: dbc: honor usb transfer size boundaries.
usb: xhci: Fix handling errors mid TD followed by other errors
xhci: Mitigate failed set dequeue pointer commands
xhci: Fix incorrect stream context type macro
USB: gadget: dummy-hcd: Fix "task hung" problem
usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store
usb: dwc3: core: Fix system suspend on TI AM62 platforms
xhci: tegra: fix checked USB2 port number
usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFG
usb: typec: qcom-pmic-typec: fix sink status being overwritten with RP_DEF
usb: typec: altmode should keep reference to parent
MAINTAINERS: usb: raw-gadget: add bug tracker link
MAINTAINERS: Add an entry for the LJCA drivers
some CPU errata in that area
- Do not apply the Zenbleed fix on anything else except AMD Zen2 on the
late microcode loading path
- Clear CPU buffers later in the NMI exit path on 32-bit to avoid
register clearing while they still contain sensitive data, for the
RDFS mitigation
- Do not clobber EFLAGS.ZF with VERW on the opportunistic SYSRET exit
path on 32-bit
- Fix parsing issues of memory bandwidth specification in sysfs for
resctrl's memory bandwidth allocation feature
- Other small cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=n0wZ
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Explicitly disable the TSC deadline timer when going idle to address
some CPU errata in that area
- Do not apply the Zenbleed fix on anything else except AMD Zen2 on the
late microcode loading path
- Clear CPU buffers later in the NMI exit path on 32-bit to avoid
register clearing while they still contain sensitive data, for the
RDFS mitigation
- Do not clobber EFLAGS.ZF with VERW on the opportunistic SYSRET exit
path on 32-bit
- Fix parsing issues of memory bandwidth specification in sysfs for
resctrl's memory bandwidth allocation feature
- Other small cleanups and improvements
* tag 'x86_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Always explicitly disarm TSC-deadline timer
x86/CPU/AMD: Only apply Zenbleed fix for Zen2 during late microcode load
x86/bugs: Use code segment selector for VERW operand
x86/entry_32: Clear CPU buffers after register restore in NMI return
x86/entry_32: Do not clobber user EFLAGS.ZF
x86/resctrl: Annotate get_mem_config() functions as __init
x86/resctrl: Avoid overflow in MB settings in bw_validate()
x86/amd_nb: Add new PCI ID for AMD family 1Ah model 20h
remains masked when it gets reenabled later
- Plug a small race in GIC-v4 where userspace can force an affinity change of
a virtual CPU (vPE) in its unmapping path
- Do not mix the two sets of ocelot irqchip's registers in the mask
calculation of the main interrupt sticky register
- Other smaller fixlets and cleanups
-----BEGIN PGP SIGNATURE-----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=LwSw
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a case for sifive-plic where an interrupt gets disabled *and*
masked and remains masked when it gets reenabled later
- Plug a small race in GIC-v4 where userspace can force an affinity
change of a virtual CPU (vPE) in its unmapping path
- Do not mix the two sets of ocelot irqchip's registers in the mask
calculation of the main interrupt sticky register
- Other smaller fixlets and cleanups
* tag 'irq_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzg2l: Fix missing put_device
irqchip/riscv-intc: Fix SMP=n boot with ACPI
irqchip/sifive-plic: Unmask interrupt in plic_irq_enable()
irqchip/gic-v4: Don't allow a VMOVP on a dying VPE
irqchip/sifive-plic: Return error code on failure
irqchip/riscv-imsic: Fix output text of base address
irqchip/ocelot: Comment sticky register clearing code
irqchip/ocelot: Fix trigger register address
irqchip: Remove obsolete config ARM_GIC_V3_ITS_PCI
- Fix another aspect of delayed dequeued tasks wrt determining their state,
i.e., whether they're runnable or blocked
- Handle delayed dequeued tasks and their migration wrt PSI properly
- Fix the situation where a delayed dequeue task gets enqueued into a new
class, which should not happen
- Fix a case where memory allocation would happen while the runqueue lock is
held, which is a no-no
- Do not over-schedule when tasks with shorter slices preempt the currently
running task
- Make sure delayed to deque entities are properly handled before unthrottling
- Other smaller cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=1D7H
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduling fixes from Borislav Petkov:
- Add PREEMPT_RT maintainers
- Fix another aspect of delayed dequeued tasks wrt determining their
state, i.e., whether they're runnable or blocked
- Handle delayed dequeued tasks and their migration wrt PSI properly
- Fix the situation where a delayed dequeue task gets enqueued into a
new class, which should not happen
- Fix a case where memory allocation would happen while the runqueue
lock is held, which is a no-no
- Do not over-schedule when tasks with shorter slices preempt the
currently running task
- Make sure delayed to deque entities are properly handled before
unthrottling
- Other smaller cleanups and improvements
* tag 'sched_urgent_for_v6.12_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add an entry for PREEMPT_RT.
sched/fair: Fix external p->on_rq users
sched/psi: Fix mistaken CPU pressure indication after corrupted task state bug
sched/core: Dequeue PSI signals for blocked tasks that are delayed
sched: Fix delayed_dequeue vs switched_from_fair()
sched/core: Disable page allocation in task_tick_mm_cid()
sched/deadline: Use hrtick_enabled_dl() before start_hrtick_dl()
sched/eevdf: Fix wakeup-preempt by checking cfs_rq->nr_running
sched: Fix sched_delayed vs cfs_bandwidth
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZxTVfAAKCRCAXGG7T9hj
vixMAQDQPRqtmbpAr9l7tIrVMRqGktuV6nVTeLGXUDpqC7wM0gEA9c/h/Z0QVKth
0XKyYWMsUIQ2Y5lKP8ywr0KxRQuUmQ0=
=U3e3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.12a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for a build failure introduced this merge window"
* tag 'for-linus-6.12a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Remove dependency between pciback and privcmd
Just another small tracing fix from Sean.
-----BEGIN PGP SIGNATURE-----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=MnDt
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-10-20' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Just another small tracing fix from Sean"
* tag 'dma-mapping-6.12-2024-10-20' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix tracing dma_alloc/free with vmalloc'd memory
-----BEGIN PGP SIGNATURE-----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=B5R5
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.12-20241019' of git://git.kernel.dk/linux
Pull one more io_uring fix from Jens Axboe:
"Fix for a regression introduced in 6.12-rc2, where a condition check
was negated and hence -EAGAIN would bubble back up up to userspace
rather than trigger a retry condition"
* tag 'io_uring-6.12-20241019' of git://git.kernel.dk/linux:
io_uring/rw: fix wrong NOWAIT check in io_rw_init_file()
Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZxQINSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfuiAP9+gxzU
MYpyNFYmS8iwbma+wagKMr2ZxpiIAnQIukBtugD7Baqw7YjNbAPtCcQMgC96y8ac
X7zeMkLTyMqkaIjOQFk=
=eHKZ
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
scsi: mpi3mr: Validate SAS port assignments
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
scsi: ufs: core: Requeue aborted request
scsi: ufs: core: Fix the issue of ICU failure
- Fix allocation of idle shadow stack allocation during hotplug
If function graph tracing is started when a CPU is offline, if it were
come online during the trace then the idle task that represents the CPU
will not get a shadow stack allocated for it. This means all function
graph hooks that happen while that idle task is running (including in
interrupt mode) will have all its events dropped.
Switch over to the CPU hotplug mechanism that will have any newly
brought on line CPU get a callback that can allocate the shadow stack
for its idle task.
- Fix allocation size of the ret_stack_list array
When function graph tracing converted over to allowing more than one
user at a time, it had to convert its shadow stack from an array of
ret_stack structures to an array of unsigned longs. The shadow stacks
are allocated in batches of 32 at a time and assigned to every running
task. The batch is held by the ret_stack_list array. But when the
conversion happened, instead of allocating an array of 32 pointers, it
was allocated as a ret_stack itself (PAGE_SIZE). This ret_stack_list
gets passed to a function that iterates over what it believes is its
size defined by the FTRACE_RETSTACK_ALLOC_SIZE macro (which is 32).
Luckily (PAGE_SIZE) is greater than 32 * sizeof(long), otherwise this
would have been an array overflow. This still should be fixed and the
ret_stack_list should be allocated to the size it is expected to be as
someday it may end up being bigger than SHADOW_STACK_SIZE.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZxP8RhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmW3AP4qCOvU/g9g6u32gIZmS1oUWqe3q+Rq
9OKCk0JP6GGc8AD/cF816lbs5vpDiZFdbBvaz5gLHqhfAt35NVU8T5tbJA4=
=Lh3A
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
"A couple of fixes to function graph infrastructure:
- Fix allocation of idle shadow stack allocation during hotplug
If function graph tracing is started when a CPU is offline, if it
were come online during the trace then the idle task that
represents the CPU will not get a shadow stack allocated for it.
This means all function graph hooks that happen while that idle
task is running (including in interrupt mode) will have all its
events dropped.
Switch over to the CPU hotplug mechanism that will have any newly
brought on line CPU get a callback that can allocate the shadow
stack for its idle task.
- Fix allocation size of the ret_stack_list array
When function graph tracing converted over to allowing more than
one user at a time, it had to convert its shadow stack from an
array of ret_stack structures to an array of unsigned longs. The
shadow stacks are allocated in batches of 32 at a time and assigned
to every running task. The batch is held by the ret_stack_list
array.
But when the conversion happened, instead of allocating an array of
32 pointers, it was allocated as a ret_stack itself (PAGE_SIZE).
This ret_stack_list gets passed to a function that iterates over
what it believes is its size defined by the
FTRACE_RETSTACK_ALLOC_SIZE macro (which is 32).
Luckily (PAGE_SIZE) is greater than 32 * sizeof(long), otherwise
this would have been an array overflow. This still should be fixed
and the ret_stack_list should be allocated to the size it is
expected to be as someday it may end up being bigger than
SHADOW_STACK_SIZE"
* tag 'ftrace-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Allocate ret_stack_list with proper size
fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCZxK0IhEcd3VmYW5Aa2Vy
bmVsLm9yZwAKCRDyomI6a/yO7bYaAP9RInzgnGtws5coddMT8vlsMsCGb+4EZegC
Uhw/gqWO3gD/Ua/x97apb4SZesyto8fm3rP4Aw0CvtBL5FuyKGnBBAU=
=CRIh
-----END PGP SIGNATURE-----
Merge tag 'ipe-pr-20241018' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull ipe fixes from Fan Wu:
"This addresses several issues identified by Luca when attempting to
enable IPE on Debian and systemd:
- address issues with IPE policy update errors and policy update
version check, improving the clarity of error messages for better
understanding by userspace programs.
- enable IPE policies to be signed by secondary and platform
keyrings, facilitating broader use across general Linux
distributions like Debian.
- updates the IPE entry in the MAINTAINERS file to reflect the new
tree URL and my updated email from kernel.org"
* tag 'ipe-pr-20241018' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
MAINTAINERS: update IPE tree url and Fan Wu's email
ipe: fallback to platform keyring also if key in trusted keyring is rejected
ipe: allow secondary and platform keyrings to install/update policies
ipe: also reject policy updates with the same version
ipe: return -ESTALE instead of -EINVAL on update when new policy has a lower version
- a fix for Zinitix driver to not fail probing if property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support
for more hardware.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZxMk3gAKCRBAj56VGEWX
nHcXAP99ROP6m6hoGUEvCKVtWQuuKPxJTMByLpdpHdTcX15HdQD9GB9HBVnBdIV5
hckmsRPttRfhUIlMyWWR54anNidx4ww=
=yn7x
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for Zinitix driver to not fail probing if the property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support for
more hardware
* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - don't fail if linux,keycodes prop is absent
Input: xpad - add support for MSI Claw A1M
Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller
- fix for multiple slabs created with the same name
- enable multipage folios
- theorical fix to also look for opened fids by inode if none
was found by dentry
-----BEGIN PGP SIGNATURE-----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=VG4t
-----END PGP SIGNATURE-----
Merge tag '9p-for-6.12-rc4' of https://github.com/martinetd/linux
Pull 9p fixes from Dominique Martinet:
"Mashed-up update that I sat on too long:
- fix for multiple slabs created with the same name
- enable multipage folios
- theorical fix to also look for opened fids by inode if none was
found by dentry"
[ Enabling multi-page folios should have been done during the merge
window, but it's a one-liner, and the actual meat of the enablement
is in netfs and already in use for other filesystems... - Linus ]
* tag '9p-for-6.12-rc4' of https://github.com/martinetd/linux:
9p: Avoid creating multiple slab caches with the same name
9p: Enable multipage folios
9p: v9fs_fid_find: also lookup by inode if not found dentry
Toolchain and infrastructure:
- Fix several issues with the 'rustc-option' macro. It includes a
refactor from Masahiro of three '{cc,rust}-*' macros, which is not
a fix but avoids repeating the same commands (which would be several
lines in the case of 'rustc-option').
- Fix conditions for 'CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS'. It
includes the addition of 'CONFIG_RUSTC_LLVM_VERSION', which is not a
fix but is needed for the actual fix.
And a trivial grammar fix.
-----BEGIN PGP SIGNATURE-----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=Y7fL
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.12-2' of https://github.com/Rust-for-Linux/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix several issues with the 'rustc-option' macro. It includes a
refactor from Masahiro of three '{cc,rust}-*' macros, which is not
a fix but avoids repeating the same commands (which would be
several lines in the case of 'rustc-option').
- Fix conditions for 'CONFIG_HAVE_CFI_ICALL_NORMALIZE_INTEGERS'. It
includes the addition of 'CONFIG_RUSTC_LLVM_VERSION', which is not
a fix but is needed for the actual fix.
And a trivial grammar fix"
* tag 'rust-fixes-6.12-2' of https://github.com/Rust-for-Linux/linux:
cfi: fix conditions for HAVE_CFI_ICALL_NORMALIZE_INTEGERS
kbuild: rust: add `CONFIG_RUSTC_LLVM_VERSION`
kbuild: fix issues with rustc-option
kbuild: refactor cc-option-yn, cc-disable-warning, rust-option-yn macros
lib/Kconfig.debug: fix grammar in RUST_BUILD_ASSERT_ALLOW
A previous commit improved how !FMODE_NOWAIT is dealt with, but
inadvertently negated a check whilst doing so. This caused -EAGAIN to be
returned from reading files with O_NONBLOCK set. Fix up the check for
REQ_F_SUPPORT_NOWAIT.
Reported-by: Julian Orth <ju.orth@gmail.com>
Link: https://github.com/axboe/liburing/issues/1270
Fixes: f7c9134385 ("io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Changes in take2:
- Additional patch to drop the accidentally added empty file.
- Tidy up of a duplicate include.
Two merges of other trees.
6.12-rc2:
To pull in the move of unaligned.h from include/asm to include/linux
This was to resolve issues in linux-next.
pwm/duty_offset-for6.13-rc1@
PWM infrastructure that is use di the AD7625 ADC driver.
New device support
==================
adi,ad7173
- Add support for the AD4113 8 channel ADC.
adi,ad7606
- Add support for the AD7606C-16 and AD7606C-18 which have higher precision
and support bipolar and differential channels. A lot of driver
rework was needed to add the additional flexibility needed to support
these parts.
adi,ad7625
- New driver supporting AD7625, AD7626, AD7960 and AD7961 LVDS connected
ADCs. Interface uses a combination of a PWM control and an IIO backend
(currently a custom FPGA IP).
adi,ad8460
- New driver for the ad8460 Waveform DAC. This high speed device is
driven by a custom IP via a DMAEngine buffer.
bosch,bmi270
- New driver for this 6-axis IMU. A later patch adds SPI support.
gehc,pmc-adc
- New driver for this GE Healthcare ADC 16-channel 16 bit ADC.
invensense,mpu6050
- Add support for IAM-20680HT and IAM-20680HP variants of the IAM-20680
IMU that have better specifications in various ways including larger
FIFO sizes.
vishay,vl6030
- Support the veml7700, a stripped down veml6030 ambient light sensor.
- Support the veml6035 ambient light sensor.
Features
========
liteon,ltr390
- Allow configuration of sampling frequency
- Support suspend and resume
- Add interrupt support including threshold events + control over
event reporting persistence.
st,vl53l0x
- Add support for continuous mode via IIO buffer support and a dataready
trigger.
ti,tmp0006
- Add triggered buffer support using data ready interrupt.
vishay,vl6030
- Add regulator control support.
vishay,vl6070
- Add regulator control support.
vishay,vl6180
- Allow configuration of waiting between continuous samples.
- Use the interrupt, if available, for single shot captures
- Support continuous mode via the IIO triggered buffer interfaces.
Cleanups and minor fixes
========================
tools/event monitor
- Free dev_dir_name.
treewide
- Introduce aligned_s64 type for timestamps to replace
s64 __aligned(8). Initial use in a few drivers - many others to follow.
- Use dev_get_platform_data() instead of open-coding the access.
- InvenSense email address and maintainer updates to reflect
move to the tdk domain after acquisition.
- Switch platform drivers from remove_new() back to remove() now all
rework this was enabling is done.
- More use of device_for_each_child_node_scoped() to remove need for manual
caling of fwnode_handle_put() in early exits from the loop.
- Use IIO_MAP() macro to replace some open-coded versions.
- Constify struct iio_map arrays.
- Use irq_get_trigger_type(irq) rather than
irqd_get_trigger_type(irq_get_irq_data(irq);
core
- unsigned to unsigned int.
adi,ad3552r
- Fix to low a limit on max SPI clock speed. No rush to upstream this
one as the binding that uses the higher speed will merge via this
tree once ready.
adi,ad5770r
- Use get_unaligned_le16() instead of open-coding. Note this caused
a merge issue in linux-next as unaligned.h has moved.
adi,ad7606
- Use read_avail() callback to handle the various _available attributes.
- Wrap up all data related to channel scaling into a single structure as
the use of this gets more complex for the -16 and -18 parts.
adi,adf4371
- Use chip_info structures and spi_get_device_match_data()
- Drop spi_set_drvdata() as unused.
- Reduce scope of struct clock as only touched in probe().
- Use dev_err_probe() where appropriate.
adi,axi-dac
- Improve register naming to make field and register association clearer.
- Fix a wrong register bit.
amlogic,meson8-saradc
- Allow the meson8-saradc to have the amlogic,hhi-sysctrl property.
bosch,bmp280
- Use u8 for the DMA buffer to avoid implication of other types given it
can contain be24 data.
- Use unsigned types to store raw values to make it clear they cannot be
negative.
- Drop unnecessary check for errors after IIR filter update.
- Support soft reset to get device to know state on driver load.
- Use bulk reads to retrieve the humidity calibration data.
dynaimage,al3010
- Make sure to powerdown device in error paths.
invensense,icm42600
- Add missing i2c_device-id tables.
kionix,kmx61
- Drop ACPI IDs that are not associated with valid ACPI vendor IDs
and for which there is no evidence they are in use in real devices.
liteon,ltrf261a
- Document a bad compatible that we are supporting because it is in
the wild in the Valve Steam Deck via ACPI PRP0001.
maxim,max1363
- Use get_unaligned_be16() instead of open-coding. Note this caused
a merge issue in linux-next as unaligned.h has moved.
mediatek,mt6360
- Use get_unaligned_be16() instead of open-coding. Note this caused
a merge issue in linux-next as unaligned.h has moved.
microchip,pac1921
- Drop various unnecessary type casts that were suggested by
Wconversion compiler warnings which we do not use in IIO.
Remove them because they hurt readability in cases where it is clear
not overflow can occur.
rohm,rpr0521
- Use iio_poll_func_store_time() rather than open-coding a similar solution.
semtech,sx9324
- Make sx_common_get_raw_register() local to the only code that uses it.
- Drop unnecessary acpi.h include.
st,vl53l0x
- Check the part ID register and print an info message if it is not what
is expected.
vishay,veml6030
- Fix DT binding file name to include vishay
- Use regmap_set_bits() for case where all bits are set.
- Use dev_err_probe() where appropriate.
- Add missing delay after powering up in resume path.
- Drop a processed accessor for the white channel as there is no public
information to allow a specific scale to be established.
- Use read_avail() to replace explicit custom _available attributes.
vishay,veml6070
- Use guard() to allow early returns.
- Add a devm callback to unregister the i2c device.
- Use devm_iio_device_register() to simplify removal code.
Various other minor improvements not called out explicitly.
-----BEGIN PGP SIGNATURE-----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=lBZ5
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.13a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.13
Changes in take2:
- Additional patch to drop the accidentally added empty file.
- Tidy up of a duplicate include.
Two merges of other trees.
6.12-rc2:
To pull in the move of unaligned.h from include/asm to include/linux
This was to resolve issues in linux-next.
pwm/duty_offset-for6.13-rc1@
PWM infrastructure that is use di the AD7625 ADC driver.
New device support
==================
adi,ad7173
- Add support for the AD4113 8 channel ADC.
adi,ad7606
- Add support for the AD7606C-16 and AD7606C-18 which have higher precision
and support bipolar and differential channels. A lot of driver
rework was needed to add the additional flexibility needed to support
these parts.
adi,ad7625
- New driver supporting AD7625, AD7626, AD7960 and AD7961 LVDS connected
ADCs. Interface uses a combination of a PWM control and an IIO backend
(currently a custom FPGA IP).
adi,ad8460
- New driver for the ad8460 Waveform DAC. This high speed device is
driven by a custom IP via a DMAEngine buffer.
bosch,bmi270
- New driver for this 6-axis IMU. A later patch adds SPI support.
gehc,pmc-adc
- New driver for this GE Healthcare ADC 16-channel 16 bit ADC.
invensense,mpu6050
- Add support for IAM-20680HT and IAM-20680HP variants of the IAM-20680
IMU that have better specifications in various ways including larger
FIFO sizes.
vishay,vl6030
- Support the veml7700, a stripped down veml6030 ambient light sensor.
- Support the veml6035 ambient light sensor.
Features
========
liteon,ltr390
- Allow configuration of sampling frequency
- Support suspend and resume
- Add interrupt support including threshold events + control over
event reporting persistence.
st,vl53l0x
- Add support for continuous mode via IIO buffer support and a dataready
trigger.
ti,tmp0006
- Add triggered buffer support using data ready interrupt.
vishay,vl6030
- Add regulator control support.
vishay,vl6070
- Add regulator control support.
vishay,vl6180
- Allow configuration of waiting between continuous samples.
- Use the interrupt, if available, for single shot captures
- Support continuous mode via the IIO triggered buffer interfaces.
Cleanups and minor fixes
========================
tools/event monitor
- Free dev_dir_name.
treewide
- Introduce aligned_s64 type for timestamps to replace
s64 __aligned(8). Initial use in a few drivers - many others to follow.
- Use dev_get_platform_data() instead of open-coding the access.
- InvenSense email address and maintainer updates to reflect
move to the tdk domain after acquisition.
- Switch platform drivers from remove_new() back to remove() now all
rework this was enabling is done.
- More use of device_for_each_child_node_scoped() to remove need for manual
caling of fwnode_handle_put() in early exits from the loop.
- Use IIO_MAP() macro to replace some open-coded versions.
- Constify struct iio_map arrays.
- Use irq_get_trigger_type(irq) rather than
irqd_get_trigger_type(irq_get_irq_data(irq);
core
- unsigned to unsigned int.
adi,ad3552r
- Fix to low a limit on max SPI clock speed. No rush to upstream this
one as the binding that uses the higher speed will merge via this
tree once ready.
adi,ad5770r
- Use get_unaligned_le16() instead of open-coding. Note this caused
a merge issue in linux-next as unaligned.h has moved.
adi,ad7606
- Use read_avail() callback to handle the various _available attributes.
- Wrap up all data related to channel scaling into a single structure as
the use of this gets more complex for the -16 and -18 parts.
adi,adf4371
- Use chip_info structures and spi_get_device_match_data()
- Drop spi_set_drvdata() as unused.
- Reduce scope of struct clock as only touched in probe().
- Use dev_err_probe() where appropriate.
adi,axi-dac
- Improve register naming to make field and register association clearer.
- Fix a wrong register bit.
amlogic,meson8-saradc
- Allow the meson8-saradc to have the amlogic,hhi-sysctrl property.
bosch,bmp280
- Use u8 for the DMA buffer to avoid implication of other types given it
can contain be24 data.
- Use unsigned types to store raw values to make it clear they cannot be
negative.
- Drop unnecessary check for errors after IIR filter update.
- Support soft reset to get device to know state on driver load.
- Use bulk reads to retrieve the humidity calibration data.
dynaimage,al3010
- Make sure to powerdown device in error paths.
invensense,icm42600
- Add missing i2c_device-id tables.
kionix,kmx61
- Drop ACPI IDs that are not associated with valid ACPI vendor IDs
and for which there is no evidence they are in use in real devices.
liteon,ltrf261a
- Document a bad compatible that we are supporting because it is in
the wild in the Valve Steam Deck via ACPI PRP0001.
maxim,max1363
- Use get_unaligned_be16() instead of open-coding. Note this caused
a merge issue in linux-next as unaligned.h has moved.
mediatek,mt6360
- Use get_unaligned_be16() instead of open-coding. Note this caused
a merge issue in linux-next as unaligned.h has moved.
microchip,pac1921
- Drop various unnecessary type casts that were suggested by
Wconversion compiler warnings which we do not use in IIO.
Remove them because they hurt readability in cases where it is clear
not overflow can occur.
rohm,rpr0521
- Use iio_poll_func_store_time() rather than open-coding a similar solution.
semtech,sx9324
- Make sx_common_get_raw_register() local to the only code that uses it.
- Drop unnecessary acpi.h include.
st,vl53l0x
- Check the part ID register and print an info message if it is not what
is expected.
vishay,veml6030
- Fix DT binding file name to include vishay
- Use regmap_set_bits() for case where all bits are set.
- Use dev_err_probe() where appropriate.
- Add missing delay after powering up in resume path.
- Drop a processed accessor for the white channel as there is no public
information to allow a specific scale to be established.
- Use read_avail() to replace explicit custom _available attributes.
vishay,veml6070
- Use guard() to allow early returns.
- Add a devm callback to unregister the i2c device.
- Use devm_iio_device_register() to simplify removal code.
Various other minor improvements not called out explicitly.
* tag 'iio-for-6.13a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (161 commits)
iio: imu: bmi270: Remove duplicated include in bmi270_i2c.c
iio: adc: ad7606: Drop spurious empty file.
iio: light: rpr0521: Use generic iio_pollfunc_store_time()
iio: light: vl6180: Add support for Continuous Mode
iio: light: vl6180: Added Interrupt support for single shot access
iio: light: vl6180: Add configurable inter-measurement period support
MAINTAINERS: add entry for VEML6030 ambient light sensor driver
iio: light: veml6030: add support for veml7700
dt-bindings: iio: light: veml6030: add veml7700
iio: light: veml6035: fix read_avail in no_irq case for veml6035
iio: dac: adi-axi-dac: update register names
iio: dac: adi-axi-dac: fix wrong register bitfield
docs: iio: new docs for ad7625 driver
iio: adc: ad7625: add driver
dt-bindings: iio: adc: add AD762x/AD796x ADCs
iio: Convert unsigned to unsigned int
iio: pressure: bmp280: Fix uninitialized variable
iio: Switch back to struct platform_driver::remove()
iio: imu: bmi323: remove redundant register definition
iio: frequency: adf4371: make use of dev_err_probe()
...
The ret_stack_list is an array of ret_stack shadow stacks for the function
graph usage. When the first function graph is enabled, all tasks in the
system get a shadow stack. The ret_stack_list is a 32 element array of
pointers to these shadow stacks. It allocates the shadow stack in batches
(32 stacks at a time), assigns them to running tasks, and continues until
all tasks are covered.
When the function graph shadow stack changed from an array of
ftrace_ret_stack structures to an array of longs, the allocation of
ret_stack_list went from allocating an array of 32 elements to just a
block defined by SHADOW_STACK_SIZE. Luckily, that's defined as PAGE_SIZE
and is much more than enough to hold 32 pointers. But it is way overkill
for the amount needed to allocate.
Change the allocation of ret_stack_list back to a kcalloc() of
FTRACE_RETSTACK_ALLOC_SIZE pointers.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241018215212.23f13f40@rorschach
Fixes: 42675b723b ("function_graph: Convert ret_stack to a series of longs")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph infrastructure allocates a shadow stack for every task
when enabled. This includes the idle tasks. The first time the function
graph is invoked, the shadow stacks are created and never freed until the
task exits. This includes the idle tasks.
Only the idle tasks that were for online CPUs had their shadow stacks
created when function graph tracing started. If function graph tracing is
enabled and a CPU comes online, the idle task representing that CPU will
not have its shadow stack created, and all function graph tracing for that
idle task will be silently dropped.
Instead, use the CPU hotplug mechanism to allocate the idle shadow stacks.
This will include idle tasks for CPUs that come online during tracing.
This issue can be reproduced by:
# cd /sys/kernel/tracing
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo 0 > set_ftrace_pid
# echo function_graph > current_tracer
# echo 1 > options/funcgraph-proc
# echo 1 > /sys/devices/system/cpu/cpu1
# grep '<idle>' per_cpu/cpu1/trace | head
Before, nothing would show up.
After:
1) <idle>-0 | 0.811 us | __enqueue_entity();
1) <idle>-0 | 5.626 us | } /* enqueue_entity */
1) <idle>-0 | | dl_server_update_idle_time() {
1) <idle>-0 | | dl_scaled_delta_exec() {
1) <idle>-0 | 0.450 us | arch_scale_cpu_capacity();
1) <idle>-0 | 1.242 us | }
1) <idle>-0 | 1.908 us | }
1) <idle>-0 | | dl_server_start() {
1) <idle>-0 | | enqueue_dl_entity() {
1) <idle>-0 | | task_contending() {
Note, if tracing stops and restarts, the old way would then initialize
the onlined CPUs.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20241018214300.6df82178@rorschach
Fixes: 868baf07b1 ("ftrace: Fix memory leak with function graph and cpu hotplug")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
