Document support for the DU IP found on the Renesas RZ/V2N (R9A09G056) SoC.
The DU IP is functionally identical to that on the RZ/V2H(P) SoC, so no
driver changes are needed. The existing `renesas,r9a09g057-du` compatible
will be used as a fallback for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251023213350.681602-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Return the lowest port clock for HDMI when the reverse algorithm
calculates it to be 0 to avoid errors later but throw a warn.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251110061940.545183-2-suraj.kandpal@intel.com
Implement the HDMI Algorithm to dynamically create LT PHY state
based on the port clock provided.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251110061940.545183-1-suraj.kandpal@intel.com
Add test cases to check outcome of fair GuC context or doorbells
IDs allocations for regular and admin-only PF mode.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251106165932.2143-1-michal.wajdeczko@intel.com
Instead of trying very hard to find the largest fair number of GuC
doorbell IDs that could be allocated for VFs on the current GT, pick
some smaller rounded down to power-of-two value that is more likely
to be provisioned in the same manner by the other PF instance:
num VFs | num doorbells
--------+--------------
63..32 | 4
31..16 | 8
15..8 | 16
7..4 | 32
3..2 | 64
1 | 128 (regular PF)
1 | 240 (admin only PF)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251105183253.863-3-michal.wajdeczko@intel.com
Instead of trying very hard to find the largest fair number of GuC
context IDs that could be allocated for VFs on the current GT, pick
some smaller rounded down to power-of-two value that is more likely
to be provisioned in the same manner by the other PF instance:
num VFs | num contexts
--------+-------------
63..32 | 1024
31..16 | 2048
15..8 | 4096
7..4 | 8192
3..2 | 16384
1 | 32768 (regular PF)
1 | 64512 (admin only PF)
Add also helper function to determine if the PF is admin-only,
and for now use .probe_display flag for that.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20251105183253.863-2-michal.wajdeczko@intel.com
For whatever unknown reason the pmdemand code is using a custom
50 usec fast polling timeout instead of the normal 2 usec
value. Switch to the standard value to get rid of the special
case.
The eventual aim is to get rid of the fast vs. slow timeout
entirely and switch over to poll_timeout_us().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-11-ville.syrjala@linux.intel.com
For whatever unknown reason the HDCP code is using a custom
10 usec fast polling timeout instead of the normal 2 usec
value. Switch to the standard value to get rid of the special
case.
The eventual aim is to get rid of the fast vs. slow timeout
entirely and switch over to poll_timeout_us().
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-10-ville.syrjala@linux.intel.com
The LT PHY code is abusing intel_de_wait_custom() in all kinds of weird
ways. Get rid of the weird fast timeouts, and just use the slow ones.
For consistency with intel_wait_for_register() we'll stick to the
default 2 usec fast timeout for all cases.
Someone really needs to properly document where all these magic numbers
came from...
This will let us eventually nuke intel_de_wait_custom() and convert
over to poll_timeout_us().
v2: Go for the longer (ms) timeout in case it actually matters
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Include the units the in the define name for XELPDP_PORT_RESET_END_TIMEOUT
to make it match all its other counterparts.
v2: It's _MS not _US (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106155249.2810-1-ville.syrjala@linux.intel.com
The slow vs. fast timeout stuff is really just an implementation
detail. Let's not spread that terminology in random timeout defines.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-7-ville.syrjala@linux.intel.com
XELPDP_MSGBUS_TIMEOUT_FAST_US looks to be just an obfuscated version
of the default 2 microsecond fast timeout used by
intel_wait_for_register(). Get rid of it to make it clear what's going
on here.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-6-ville.syrjala@linux.intel.com
There was a completely unjustified change to the cx0 powerdown
timeout, and the way it was done now prevents future conversion
to poll_timeout_us().
Assuming there was some reason the bigger timeout let's nuke
the old short timeout (XELPDP_PORT_POWERDOWN_UPDATE_TIMEOUT_US)
nd replace it with the bigger timeout
(XELPDP_PORT_POWERDOWN_UPDATE_TIMEOUT_MS).
For consistency with intel_wait_for_register() we'll stick to the
default 2 usec for the fast timeout.
v2: Go for the longer (ms) timeout in case it actually matters
v3: Note the defaullt 2 usec fast timeout (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The actual timeout used isn't particularly interesting, so
don't print it. Makes the code simpler.
The debugs are also using some random capitalizaton rule.
Clean that up a bit while at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The actual timeout used isn't particularly interesting, so
don't print it. Makes the code simpler.
The debugs are also using some random capitalizaton rule.
Clean that up a bit while at it.
Also intel_cx0_powerdown_change_sequence() used one timeout
in the actual code but printed a different one.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251106152049.21115-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename irq_polling_work to qaic_irq_polling_work to reduce ambiguity
and avoid potential naming conflicts in the future.
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031192511.3179130-1-zachary.mckevitt@oss.qualcomm.com
After subsystem of the device has crashed it sends a message with
command DEBUG_TRANSFER_INFO to kernel(host). Send ACK for that message
and then prepare to collect the ramdump of the subsystem
Steps of crashdump collection is as follows,
1) Device sends DEBUG_TRANSFER_INFO message indicating that device wants
to send crashdump.
2) Send an acknowledgment to that message either ACK or NACK.
a) NACK will inform the device that host will not download the
crashdump
b) ACK will inform the device that host will download the crashdump
3) Along with the DEBUG_TRANSFER_INFO we receive a table base address and
its length, use that to download that table from device.
a) This table is meta data of the crashdump and not the actual
crashdump.
4) After we respond as ACK for message received on step 1) we start
downloading the table. Use series of MEMORY_READ/MEMORY_READ_RSP SSR
commands to download the entire table.
5) Each entry in the table represents a segment of crashdump. Once the
table downloading is complete, iterate through each entry of table
and download each crashdump segment(same as table itself). Table entry
contains the memory base address and length along with other info.
6) After the entire crashdump is downloaded send DEBUG_TRANSFER_DONE
which marks that host is terminating the crashdump transfer. This
message can be send in both success or error case.
7) After receiving DEBUG_TRANSFER_DONE_RSP hand over the crashdump to
dev_coredumpv() and free all the necessary memory.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <pkanojiy@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-4-zachary.mckevitt@oss.qualcomm.com
Subsystem restart (SSR) for a qaic device means that a NSP has crashed,
and will be restarted. However the restart process will lose any state
associated with activation, so the user will need to do some recovery.
While SSR has the provision to collect a crash dump, this patch does not
implement support for it.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Co-developed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Troy Hanson <quic_thanson@quicinc.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: Fix minor checkpatch whitespace issues]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-3-zachary.mckevitt@oss.qualcomm.com
Expose sysfs files for each DBC representing the current state of that DBC.
For example, sysfs for DBC ID 0 and accel minor number 0 looks like this,
/sys/class/accel/accel0/dbc0_state
Following are the states and their corresponding values,
DBC_STATE_IDLE (0)
DBC_STATE_ASSIGNED (1)
DBC_STATE_BEFORE_SHUTDOWN (2)
DBC_STATE_AFTER_SHUTDOWN (3)
DBC_STATE_BEFORE_POWER_UP (4)
DBC_STATE_AFTER_POWER_UP (5)
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-2-zachary.mckevitt@oss.qualcomm.com
Failing to set power off indicates an unrecoverable hardware or firmware
error. Update the driver to treat such a failure as a fatal condition
and stop further operations that depend on successful power state
transition.
This prevents undefined behavior when the hardware remains in an
unexpected state after a failed power-off attempt.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251106180521.1095218-1-lizhi.hou@amd.com
The i915_gem_object_get_frontbuffer() name is rather confusing wrt.
intel_frontbuffer_get(). Rename to i915_gem_object_frontbuffer_lookup()
to make things less confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The current attempted split between xe/i915 vs. display
for intel_frontbuffer is a mess:
- the i915 rcu leaks through the interface to the display side
- the obj->frontbuffer write-side is now protected by a display
specific spinlock even though the actual obj->framebuffer
pointer lives in a i915 specific structure
- the kref is getting poked directly from both sides
- i915_active is still on the display side
Clean up the mess by moving everything about the frontbuffer
lifetime management to the i915/xe side:
- the rcu usage is now completely contained in i915
- frontbuffer_lock is moved into i915
- kref is on the i915/xe side (xe needs the refcount as well
due to intel_frontbuffer_queue_flush()->intel_frontbuffer_ref())
- the bo (and its refcounting) is no longer on the display side
- i915_active is contained in i915
I was pondering whether we could do this in some kind of smaller
steps, and perhaps we could, but it would probably have to start
with a bunch of reverts (which for sure won't go cleanly anymore).
So not convinced it's worth the hassle.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-10-ville.syrjala@linux.intel.com
After upcoming intel_frontbuffer lifetime related changes we
won't need intel_frontbuffer::obj for anything apart from
getting at the display. Add a direct pointer for that instead
so that the obj pointer can be completely eliminated.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to hide the kref from the high level frontbuffer code.
To that end abstract the kref_get() in intel_frontbuffer_queue_flush()
(which is the only high level function that needs this) as a new
intel_frontbuffer_ref().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Our fb_tracking.lock is serving a double duty:
- protects fb_tracking.busy_bits
- provides the write-side protection for obj->frontbuffer
Split obj->frontbuffer role into a separate lock so that
we can clean up the current mess with the frontbuffer lifetime
management.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_bo_frontbuffer_flush_for_display() is a bit too low level
to be directly in the high level dirtyfb code. Move the calls
into intel_frontbuffer_flush().
There is a slight behavioural change here in that we now skip
the flush if the bo is not a current scanout buffer (front->bits
== 0). But that is fine as the flush will eventually happen via
the fb pinning code if/when the bo becomes a scanout buffer again.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Convert intel_bo_flush_if_display() to be an operation on the
frontbuffer object rather than the underlying gem bo. This
will help with cleaning up the frontbuffer xe/i915 vs. display
split.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of intel_frontbuffer_flip_{prepare,complete}() (and
the accompanying flip_bits) since they are unused.
I suppose these could technically provide a minor optimization
over intel_frontbuffer_flip() in that the flush would get
deferred further if new rendering were to sneak in between the
prepare() and complete() calls. But for correctness it should
not make any difference since another flush will anyway follow
once the new rendering finishes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of intel_frontbuffer_flip_{prepare,complete}() from
the overlay code and just use intel_frontbuffer_flip() instead.
The only difference between these are the light interactions
with the ORIGIN_CS busyness tracking, but since the only user
of this is the overlay/xf86-video-intel/Xv the buffer will
always be filled by the CPU and thus we'll never see any
ORIGIN_CS frontbuffer activity there anyway. Also I don't
think we actually have anything covered by the frontbuffer
tracking that affects the overlay (FBC is on the primary
plane, DRRS isn't currently enabled on the platforms with
overlay, and PSR doesn't exist in the hardware).
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-3-ville.syrjala@linux.intel.com
I don't even know why we have this DIRTYFB flush in the overlay
code. We'll anyway call intel_frontbuffer_flip() so there should
be no need to pretend that this is some kind of frontbuffer only
rendering operation.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-2-ville.syrjala@linux.intel.com
First, we can't assume pipe == crtc index. If a pipe is fused off in
between, it no longer holds. intel_crtc_for_pipe() is the only proper
way to get from a pipe to the corresponding crtc.
Second, drivers aren't supposed to access or index drm->vblank[]
directly. There's drm_crtc_vblank_crtc() for this.
Use both functions to fix the pipe to vblank conversion.
Fixes: f02658c46c ("drm/i915/psr: Add mechanism to notify PSR of pipe enable/disable")
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: stable@vger.kernel.org # v6.16+
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251106200000.1455164-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently, wait_event_timeout() in drm_wait_one_vblank() uses a 100ms
timeout. Under heavy scheduling pressure or rare delayed vblank
handling, this can trigger WARNs unnecessarily.
Increase the timeout to 1000ms to reduce spurious WARNs, while still
catching genuine issues.
Reported-by: syzbot+147ba789658184f0ce04@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=147ba789658184f0ce04
Tested-by: syzbot+147ba789658184f0ce04@syzkaller.appspotmail.com
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
v2:
- Dropped unnecessary in-code comment (suggested by Thomas Zimmermann)
- Removed else branch, only log timeout case
v3:
- Replaced drm_dbg_kms()/manual logging with drm_err() (suggested by Ville Syrjälä)
- Removed unnecessary curr = drm_vblank_count() (suggested by Thomas Zimmermann)
- Fixed commit message wording ("invalid userspace calls" → "delayed vblank handling")
v4:
- Keep the original drm_WARN() to catch genuine kernel issues
- Increased timeout from 100ms → 1000ms to reduce spurious WARNs (suggested by Thomas Zimmermann)
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251028034337.6341-1-chintanlike@gmail.com
In the general workqueue implementation, if a user enqueues a work item
using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq)
while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not
specified). The same applies to schedule_work() that is using system_wq
and queue_work(), that makes use again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
For more details see the Link tag below.
This continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Use the successor of system_wq, system_percpu_wq, for the scheduler's
default timeout_wq. system_wq will be removed in a few release cycles.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251106150121.256367-1-marco.crivellari@suse.com
drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add userptr support to ivpu.
- Add IOCTL's for resource and telemetry data in amdxdna.
Core Changes:
- Improve some atomic state checking handling.
- drm/client updates.
- Use forward declarations instead of including drm_print.h
- RUse allocation flags in ttm_pool/device_init and allow specifying max
useful pool size and propagate ENOSPC.
- Updates and fixes to scheduler and bridge code.
- Add support for quirking DisplayID checksum errors.
Driver Changes:
- Assorted cleanups and fixes in rcar-du, accel/ivpu, panel/nv3052cf,
sti, imxm, accel/qaic, accel/amdxdna, imagination, tidss, sti,
panthor, vkms.
- Add Samsung S6E3FC2X01 DDIC/AMS641RW, Synaptics TDDI series DSI,
TL121BVMS07-00 (IL79900A) panels.
- Add mali MediaTek MT8196 SoC gpu support.
- Add etnaviv GC8000 Nano Ultra VIP r6205 support.
- Document powervr ge7800 support in the devicetree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/5afae707-c9aa-4a47-b726-5e1f1aa7a106@linux.intel.com
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
Xe3p_LPD updated fields of registers MBUS_CTL and DBUF_CTL to
accommodate for higher MDCLK:CDCLK ratios. Update the code to use the
new fields.
The field MBUS_TRANSLATION_THROTTLE_MIN_MASK was changed from range
[15:13] to [16:13]. Since bit 16 is not reserved in previous display
IPs and already used for something else, we can't simply extend the mask
definition to include it, but rather define an Xe3p-specific mask and
select the correct one to use based on the IP version.
Similarly, DBUF_MIN_TRACKER_STATE_SERVICE_MASK was changed from range
[18:16] to [20:16]. For the same reasons stated above, it needs a
Xe3p-specific mask definition.
v2:
- Keep definitions in the same line (i.e. without line continuation
breaks) for better readability. (Jani)
v3:
- Keep mask fields sorted by the upper limit. (Matt)
- Extend commit message to indicate why we need Xe3p-specific
definitions of the masks instead of just extending the existing
ones. (Matt)
Bspec: 68868, 68872
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-18-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
When reading memory latencies for watermark calculations, previous
display releases instructed to apply an adjustment of adding a certain
value (e.g. 6us) to all levels when the level 0's memory latency read
from hardware was zero.
For Xe3p_LPD, the instruction is to always use 6us for level 0 and to
add that value to the other levels. Add the necessary code in
sanitize_wm_latency() so that WaWmMemoryReadLatency is always applied
for Xe3p_LPD and beyond.
v2:
- Rebased after addition of prep patch "drm/i915/wm: Reorder
adjust_wm_latency() for Xe3_LPD" (dropped in v3).
v3:
- Back to the simpler approach of doing the 'wm[0] = 0' step without
modifying the rest of the code, and that inside
sanitize_wm_latency(). (Matt Roper, Ville)
Bspec: 68986, 69126
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-20-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Starting with Xe3p_LPD, we now have a new field in MEM_SS_INFO_GLOBAL
that indicates whether the memory has enabled ECC that limits display
bandwidth. Add the field ecc_impacting_de_bw to struct dram_info to
contain that information and set it appropriately when probing for
memory info.
Currently there are no instructions in Bspec on how to handle that case,
so let's throw a warning if we ever find such a scenario.
v2:
- s/ecc_impacting_de/ecc_impacting_de_bw/ to be more specific. (Matt
Atwood)
- Add warning if ecc_impacting_de_bw is true, since we currently do
not have instructions on how to handle it. (Matt Roper)
v3:
- Check on ecc_impacting_de_bw for the warning only for Xe3p_LPD and
beyond.
- Change warning macro from drm_WARN_ON_ONCE() to drm_WARN_ON().
Bspec: 69131
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-15-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Starting from display version 35, we don't need to use method1 to
calculate the watermark values anymore, so skip it.
Bspec: 68985
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-14-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Xe3p_LPD has the same behavior as for Xe3_LPD with respect to DMC
context data for pipes C and D, which are lost when their power wells
are disabled. As such, let's extend the condition for Xe3_LPD in
need_pipedmc_load_mmio() to also catch Xe3p_LPD.
Bspec: 68851
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-13-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Disable support for odd panning and size in y direction when running on
display version 35 and using semiplanar formats.
Bspec: 68903
Signed-off-by: Juha-pekka Heikkila <juha-pekka.heikkila@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-12-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Interlace mode is officially removed from HW from Xe3p_LPD. The
register TRANS_VSYNCSHIFT and the bits in TRANS_CONF are now removed, so
make sure we do not set/get these anymore.
Bspec: 69961, 70000
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-10-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Add CDCLK table for Xe3p_LPD.
Just as with Xe3_LPD, we don't need to send voltage index info in the
PMDemand message, so we are able to re-use xe3lpd_cdclk_funcs.
With the new CDCLK table, we also need to update the maximum CDCLK value
returned by intel_update_max_cdclk().
Bspec: 68861, 68863
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-8-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
With Xe3p_LPD, the SKL_BOTTOM_COLOR_GAMMA_ENABLE and
SKL_BOTTOM_COLOR_CSC_ENABLE bits are being removed. Thus, we need not
set gamma_enable nor csc_enable in crtc_state.
Note that GAMMA_MODE.POST_CSC_GAMMA_ENABLE and CSC_MODE.ICL_CSC_ENABLE
are the documented alternatives for the bottom color bits being removed.
But as these suggested bits are being checked in state checker as part
of gamma_mode, csc_mode fields and as gamma_enable/csc_enable are not
being used anywhere else functionally post ICL, we need not set these
fields in crtc_state.
Bspec: 69734
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-7-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
