Create a hash and an rhash map with btf_key_type_id == 0 and expect
bpf_map_create() to fail with -EINVAL; a positive control with a real
key type confirms the rejection is about the key-less BTF and not some
unrelated failure.
Such a map used to be accepted and then NULL-deref in btf_type_show()
when dumped through bpffs.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260901104924.346187-5-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf_var_show() calls btf_type_id_resolve() unconditionally, which
dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the
vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is
not resolved during parsing. btf_modifier_show() guards this with
'if (btf->resolved_ids)', but btf_var_show() does not.
A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux
BTF to bpf_snprintf_btf() thus NULL-derefs:
KASAN: probably user-memory-access in range [0x46638-0x4663f]
RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929)
Call Trace:
<TASK>
btf_type_show (kernel/bpf/btf.c:8259)
btf_type_snprintf_show (kernel/bpf/btf.c:8329)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Resolve the var's type directly with btf_type_skip_modifiers() when
resolved_ids is NULL, mirroring btf_modifier_show().
Fixes: c4d0bfb450 ("bpf: Add bpf_snprintf_btf helper")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260901104924.346187-4-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf_modifier_show() resolves the modifier and then calls
btf_type_ops(t)->show() unconditionally. For the void type (type_id 0,
BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL.
A "const void" (a modifier resolving to void) cannot be a map key or
value - map_check_btf() rejects it because void has no size - so the map
dump path does not reach it. But bpf_snprintf_btf() takes a type_id
straight from the BPF program, and passing such a "const void" from the
vmlinux BTF NULL-derefs:
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
RIP: 0010:btf_modifier_show (kernel/bpf/btf.c:2914)
Call Trace:
<TASK>
btf_type_show (kernel/bpf/btf.c:8251)
btf_type_snprintf_show (kernel/bpf/btf.c:8321)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Fall back to btf_df_show() when the resolved type has no show op; it
emits the "<unsupported kind:N>" placeholder already used for kinds like
FWD and FUNC. bpf_snprintf_btf() then returns the length as usual.
Fixes: c4d0bfb450 ("bpf: Add bpf_snprintf_btf helper")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260901104924.346187-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
map_check_btf() allows a key-less BTF (btf_key_type_id == 0) only for
maps that have a ->map_check_btf callback, and leaves the actual
decision to that callback. Hash maps used to have no ->map_check_btf,
so a key-less BTF was rejected outright.
That changed when htab and rhtab gained a ->map_check_btf to register a
dtor - htab in commit 1df97a7453 ("bpf: Register dtor for freeing
special fields") and rhtab in commit 6905f86012 ("bpf: Allow special
fields in resizable hashtab"). Neither looks at the key, so a key-less
hash map now passes map_check_btf() and gets created. Reading it back
through bpffs feeds the key type_id 0 into btf_type_seq_show();
btf_type_by_id() returns the void type, kind_ops[BTF_KIND_UNKN] is NULL,
and btf_type_show() dereferences it:
RIP: 0010:btf_type_show+0x223/0x2e0 kernel/bpf/btf.c:8232
RSP: 0018:ffffc9000399f868 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000028
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc9000399f970 R11: 0000000000000001 R12: ffffffff9b96b140
R13: ffffc9000399f8e0 R14: ffff88803d393c00 R15: 0000000000000003
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000000 CR3: 000000003d213000 CR4: 0000000000352ef0
DR0: 0000000039ae8f55 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btf_type_seq_show_flags+0xca/0x120 kernel/bpf/btf.c:8250
htab_map_seq_show_elem+0x12e/0x350 kernel/bpf/hashtab.c:1669
map_seq_show+0x13d/0x1e0 kernel/bpf/inode.c:293
traverse.part.0.constprop.0+0x107/0x650 fs/seq_file.c:112
traverse fs/seq_file.c:99 [inline]
seq_read_iter+0x93f/0x1270 fs/seq_file.c:196
seq_read+0x344/0x4d0 fs/seq_file.c:163
vfs_read+0x1e4/0xb40 fs/read_write.c:572
ksys_pread64 fs/read_write.c:764 [inline]
__do_sys_pread64 fs/read_write.c:772 [inline]
__se_sys_pread64 fs/read_write.c:769 [inline]
__x64_sys_pread64+0x1eb/0x250 fs/read_write.c:769
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reject a key-less BTF in htab_map_check_btf() and rhtab_map_check_btf(),
restoring the previous behavior.
Fixes: 1df97a7453 ("bpf: Register dtor for freeing special fields")
Fixes: 6905f86012 ("bpf: Allow special fields in resizable hashtab")
Reported-by: syzbot+37b56485bbbf90ad8489@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6a8f4e88.27659fcc.2ceef7.0008.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260901104924.346187-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The fix for caiaq driver's resource management to handle the errors
tries to release the resources in a common destructor call, but as a
sashiko review for another patch suggested, some of the audio
resources such as URBs have been already freed, and this may lead to a
double-free.
For addressing the double-free, call the common destructor function
from each place, and assure that the resource pointers get cleared.
Link: https://sashiko.dev/#/patchset/20260903084747.535367-1-eadavis%40sina.com
Fixes: 28abd224db ("ALSA: caiaq: Handle probe errors properly")
Link: https://patch.msgid.link/20260903103855.1807838-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The modulo sits inside the subtraction, so the check evaluates
int_val - (min % step) rather than (int_val - min) % step. The
INTEGER64 branch below it is parenthesised correctly.
The written form passes only when the value equals min % step, and such
a value is always on a step boundary, so it never misses a real
violation. It only reports valid values as invalid.
snd-aloop declares step 1 on four controls, so every non-zero value on
them is reported. Before:
# PCM Rate Shift 100000.0 value 100000 invalid for step 1 minimum 80000
# Totals: pass:660 fail:101 xfail:0 xpass:0 skip:296 error:0
After, same card, nothing else changed:
# Totals: pass:740 fail:21 xfail:0 xpass:0 skip:296 error:0
Eighteen files under sound/ declare a non-zero step.
Fixes: 5aaf9efffc ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest")
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Assisted-by: Claude:claude-opus-5
Link: https://patch.msgid.link/20260903123832.97377-1-sammiee5311@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- dm-cache: fix rwsem being locked and unlocked from different processes
- dm-integrity: set the 'stable writes' flag
- dm-integrity: fix a buffer overflow introduced in this merge window
- dm-integrity: fix an infinite loop if tag size is greater than 64
- dm-cache: fix demotion statistics
- dm-integrity: fix NULL pointer dereference in the data-recovery mode
- dm-ebs: remove a bogus restriction on the starting sector offset
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCapmHXxQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbXwlAP9TGvtNybtjhdQJmo3t528XRdwYrYuJ
TZTRcQ+KMXEAkgEAxG1l4vvECTwSkUhZXub2own7+IypiY8N5cFOWCkdVwc=
=hVzb
-----END PGP SIGNATURE-----
Merge tag 'for-7.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix a dm-crypt race condition that could make errors not being reported
- dm-cache:
- fix rwsem being locked and unlocked from different processes
- fix demotion statistics
- dm-integrity:
- set the 'stable writes' flag
- fix a buffer overflow introduced in this merge window
- fix an infinite loop if tag size is greater than 64
- fix NULL pointer dereference in dm-integrity data-recovery mode
- remove a bogus restriction on the dm-ebs starting sector offset
* tag 'for-7.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-ebs: fix incorrect device offset check in ebs_ctr()
dm-integrity: fix NULL pointer dereference when the 'R' flag is used
dm cache: fix demotion stats in passthrough mode
dm-integrity: fix infinite loop on discard with large tag size
dm-integrity: fix buffer overflow with keyed discard
dm-integrity: require stable writes for internal hash modes
dm cache: fix issue with background work locking
dm-crypt: fix a tiny race condition in crypt_dec_pending
invalidate_lock, avoiding mmap failures during concurrent size changes
and exposure of uninitialized data during allocation.
- Correct fallocate signal and zeroing error handling.
- Fix FITRIM range alignment to prevent discard requests from extending
into allocated clusters.
- Fix free-cluster accounting when cluster-freeing rollback or bitmap
clearing fails.
- Keep volumes marked dirty when ntfs errors have been recorded.
- Compute bi_sector in 512-byte units, preventing silent corruption on
4Kn devices.
- Validate sectors_per_cluster values and prevent undefined shifts when
parsing MFT and index record sizes.
- Bound $AttrDef traversal to the loaded table size.
- Fix MFT record resizing, memmove overlap, and kmap_local cleanup issues.
- Improve error propagation across attribute, EA, and reparse operations,
including returning -ERANGE for undersized xattr buffers.
- Avoid modifying the HasEA flag when setxattr fails and return
DT_UNKNOWN when directory inode lookup fails.
- Reduce contention in WOF decompression by performing block reads outside
the decompression lock.
-----BEGIN PGP SIGNATURE-----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=gAcy
-----END PGP SIGNATURE-----
Merge tag 'ntfs-for-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs
Pull ntfs fixes from Namjae Jeon:
- Serialize truncate, fallocate, and mmap fault paths with
invalidate_lock, avoiding mmap failures during concurrent size
changes and exposure of uninitialized data during allocation
- Correct fallocate signal and zeroing error handling
- Fix FITRIM range alignment to prevent discard requests from extending
into allocated clusters
- Fix free-cluster accounting when cluster-freeing rollback or bitmap
clearing fails
- Keep volumes marked dirty when ntfs errors have been recorded
- Compute bi_sector in 512-byte units, preventing silent corruption on
4Kn devices
- Validate sectors_per_cluster values and prevent undefined shifts when
parsing MFT and index record sizes
- Bound $AttrDef traversal to the loaded table size
- Fix MFT record resizing, memmove overlap, and kmap_local cleanup
issues
- Improve error propagation across attribute, EA, and reparse
operations, including returning -ERANGE for undersized xattr buffers
- Avoid modifying the HasEA flag when setxattr fails and return
DT_UNKNOWN when directory inode lookup fails
- Reduce contention in WOF decompression by performing block reads
outside the decompression lock
* tag 'ntfs-for-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs: (23 commits)
ntfs: take invalidate_lock in ntfs_filemap_page_mkwrite()
ntfs: take invalidate_lock in ntfs_setattr_size()
ntfs: handle signal interruption in fallocate
ntfs: fix FITRIM range alignment
ntfs: read WOF chunks outside the decompression lock
ntfs: leave HasEA flag untouched on setxattr failure
ntfs: fix race between fallocate and mmap reads
ntfs: fix memmove overlap in ntfs_new_attr_flags
ntfs: compute bi_sector in 512-byte units
ntfs: reject invalid sectors_per_cluster in the boot sector
ntfs: bound $AttrDef table walk to the loaded table size
ntfs: fix undefined behavior in mft/index record size calculation
ntfs: treat any nonzero dio zero-range return as an error
ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize
ntfs: do not mark the volume clean in sync_fs when errors were recorded
ntfs: skip free cluster decrement when rollback fails
ntfs: only count successfully cleared runs when freeing clusters
ntfs: fix kmap_local leak in write_mft_record_nolock() error paths
ntfs: return real error from ntfs_non_resident_attr_record_add()
ntfs: preserve error code in ntfs_resident_attr_record_add()
...
ring_buffer_read_page() rejects splice (full=1) reads on static buffers
(that is user-mapped, persistent or remote) because !read check assumes
unread pages must be swapped. However for those buffers we have no other
choice than memcpy the data.
For the memcpy case, only return an error when the writer is still on
the reader page for the splice interface to wait.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260901155445.1475405-2-vdonnefort@google.com
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The libata command completion for the ATA commands REMOVE ELEMENT AND
TRUNCATE and RESTORE ELEMENTS AND REBUILD is handled using the function
ata_scsi_depop_ua_cap_changed_complete(). This completion function raises
a UNIT ATTENTION with the additional sense code CAPACITY DATA HAS CHANGED.
But doing so, the scsi layer seeing the UNIT ATTENTION sense key ends up
failing the command, even if the command result is in fact OK.
The SAT specifications do provide more details about the capacity change
should be notified, and that relies on the ACCESSIBLE CAPACITY field of
the IDENTIFY DATA retrieved before or after the command is issued, and
then raising a UNIT ATTENTION if the capacity has really changed. However,
we do not have any simple mean to raise a unit attention from libata-scsi.
So rather than seeing the REMOVE ELEMENT AND TRUNCATE and RESTORE ELEMENTS
AND REBUILD commands failing, remove the function
ata_scsi_depop_ua_cap_changed_complete() and rely on the regular
completion callback. Since for now these commands can only be issued as
passthrough commands, the user is responsible for revalidating the device
capacity after executing these commands.
Fixes: db496721cb ("ata: libata-scsi: add support for the REMOVE ELEMENT AND TRUNCATE command")
Fixes: 1e307ca61a ("ata: libata-scsi: add support for the RESTORE ELEMENTS AND REBUILD command")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20260902020828.1436048-1-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
__cpuinfo_store_cpu() gates the GMID_EL1 read on the raw
ID_AA64PFR1_EL1, so it reads the register even when the kernel has
disabled MTE (CONFIG_ARM64_MTE=n or arm64.nomte). KVM sets HCR_EL2.TID5
in that case, and pKVM injects an UNDEF the host cannot handle:
Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP
pc : __cpuinfo_store_cpu+0xf4/0x264
Kernel panic - not syncing: Attempted to kill the idle task!
Only pKVM reaches it, and only after a CPU is offlined and brought back
online: its CPU_ON relay sets the host HCR before the CPU enters EL1,
while plain nVHE sets it at CPUHP_AP_KVM_ONLINE.
Gate the read on the CPU's own ID_AA64PFR1_EL1 with the command-line
override applied, and on CONFIG_ARM64_MTE, which no register reflects.
The boot CPU stores its registers before init_cpu_features() strips an
unsafe override, so clamp against the hardware value here too.
Fixes: f35abcbb8a ("KVM: arm64: Trap MTE access and discovery when MTE is disabled")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
When target implementation CPUs are provided, is_affected_midr_range()
accidentally passed the MIDR as both arguments to __is_affected_midr_range(),
so the REVIDR mask check operated on the wrong register.
Pass REVIDR as intended.
Fixes: 86edf6bdcf ("smccc/kvm_guest: Enable errata based on implementation CPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Khushit Shah <khushit.shah@nutanix.com>
Reviewed-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
kexec_file_load() fails on arm64 if we have CONFIG_ARM64_VA_BITS_52 but
it runs on a !FEAT_LPA2 host (such as my loving Grace machine).
That is because trans_pgd_create_copy() uses the compile time
PAGE_OFFSET (VA 52) instead of the actual VA size (48 -- due to the lack
of LPA2). With the fifth level folded, pgd_none() is always false, so
the walk cannot skip the 15 extra PGDIR_SIZE slots, and they all alias
back to the same table: the whole kernel page table gets cloned 16
times, KASAN shadow included. Without KASAN it does not blow up, it just
wastes ~RAM/32 in page tables.
Fix it by copying the linear map that is the actual one, not the
compiled one.
Fixes: a6bbf5d4d9 ("arm64: mm: Add definitions to support 5 levels of paging")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Yury Smirnov <yurymonzon@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
show_pte() walks page tables locklessly and can run with interrupts
enabled. A concurrent teardown can free a table page while it is being
walked. It can also clear a parent entry after show_pte() checked it; the
regular pXd_offset() helpers then reread the cleared entry and can derive a
bogus lower-level pointer and fault again.
Use the lockless offset helpers with the saved parent entries, as
gup_fast() does, and pass the saved PMD to pte_offset_map().
For task page tables, arm64 selects MMU_GATHER_RCU_TABLE_FREE. Disable
local interrupts around the walk to hold off RCU-deferred table frees and
block the tlb_remove_table_sync_one() IPI until the walk is finished.
Place the IRQ guard after the header print. This does not make the output a
consistent snapshot, but prevents the task page-table walk from
dereferencing a released table page or deriving a pointer from a different
parent value.
Fixes: 1d18c47c73 ("arm64: MMU fault handling and page table management")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Fraglist GRO and hardware GRO can create an fraglist of
HW-GRO packets. This cannot be segmented back into
the original form on TCP tethering scenario.
Avoid constructing such a GSO packet, by flushing an already
built fraglist GRO packet if a hardware GRO packet arrives.
Scenario (Tethering/Forwarding):
1.Driver submits a single TCP packet, P1. P1 is kept in the
gro_list as the first packet.
2. The driver submits a TCP GSO skb, P2. P2 has already aggregated
multiple TCP packets by HW_GRO, and its non-linear data is stored in
frags[].
3. P1 and P2 match the GRO rules, and since there is no local socket,
they are aggregated by skb_gro_receive_list(). The resulting skb,
P3, has a frag_list entry that still contains frags[]:
P3: [ Linear Data ] -> frag_list -> [ Linear Data ]
[ frag[1] ]
[ frag[2] ]
...
4. Later, tcp4_gso_segment() or tcp6_gso_segment() calls
skb_segment_list() to segment P3. However, skb_segment_list() only
segments the entries in frag_list. It does not segment the frags[]
inside P2, so P3 is not restored to the original packets, which leads
to IP fragmentation or packet drop in the following path.
Check skb_is_gso(skb) and current GRO method, make sure fraglist GRO
applies to consecutive non-GSO skb, others adopt regular GRO path.
Fixes: 8d95dc474f ("net: add code for TCP fraglist GRO")
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: HW He <hw.he@mediatek.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260901082312.14596-1-zhaoping.shu@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The core software reset issued in stmmac_init_dma_engine() during
ndo_open() callback clears the MTL RX packet parser registers, but
stmmac_rxp_config() is only invoked from the cls_u32 add/delete paths.
After an ifdown/ifup cycle the hardware therefore runs with the default
all-pass table while priv->tc_entries still reports the filters as
installed. Re-apply the RX packet parser table from priv->tc_entries in
stmmac_hw_setup(), right after the software reset, so the filters are
restored when the interface is brought up again.
Fixes: 4dbbe8dde8 ("net: stmmac: Add support for U32 TC filter using Flexible RX Parser")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Link: https://patch.msgid.link/20260831-stmmac_tc_cls32_reconfigure-v1-1-21cb459e64ae@oss.qualcomm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RX queue 31 has always been allocated and filled by airoha_qdma_init_rx()
since RX_DONE_INT_MASK spans queues 0-31, but none of the RX_IRQ*
_BANK_PIN_MASK values covered BIT(31). As a consequence the RX_DONE
interrupt for queue 31 was never enabled, airoha_qdma_rx_process() never
ran on that queue and its buffers were never reaped.
Route RX queue 31's RX_DONE interrupt to IRQ bank 1 so that the queue
is drained and its buffers returned to the page pool.
Fixes: f252493e18 ("net: airoha: Enable multiple IRQ lines support in airoha_eth driver.")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260830-airoha-rxdone-rxq31-v1-1-830a91503f2f@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Due to non standard IMAP and SMTP protocols by Proton Mail, the account
was giving trouble. Since my linux.dev account has been approved, all
communication related to Linux development shall now be done there.
Signed-off-by: Aditya Garg <aditya.garg@linux.dev>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260723100136.14467-1-aditya.garg@linux.dev
This is a resubmission of commit d79716401a ("drm/amd/display: use
plane color_mgmt_changed to track colorop changes") whose change was
reverted by commit 0461ba9a79 ("Merge tag 'amd-drm-next-7.3-2026-07-02'
of https://gitlab.freedesktop.org/agd5f/linux into drm-next") during a
merge conflict resolution.
Original commit message:
```
Ensure the driver tracks changes in any colorop property of a plane
color pipeline by using the same mechanism of CRTC color management and
update plane color blocks when any colorop property changes. It fixes an
issue observed on gamescope settings for night mode which is done via
shaper/3D-LUT updates.
```
Fixes: 0461ba9a79 ("Merge tag 'amd-drm-next-7.3-2026-07-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-next")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260807115712.22423-1-mwen@igalia.com
Allison Henderson says:
====================
net/rds: own the fastpath locks across connection teardown
This is v5 of the follow-up set to "net/rds: Bug fix ports, part 2"
[1] (v1 at [2], v2 at [3], v3 at [4], v4 at [5]). During review of part 2,
the later half of that series needed more work than a respin, so it was
split off into this set together with the companion fixes identified
along the way. As discussed on the v2 thread, it is targeted at net.
RDS connection teardown quiesces the transmit and receive-refill fast
paths by waiting for the RDS_IN_XMIT/RDS_RECV_REFILL bits to be
sampled clear. Sampling a bit clear is not owning it: the fast path
can re-take its bit right after the wait returns and then run
concurrently with the transport shutdown and the send-state reset.
Oracle UEK closed this by making teardown acquire the bits as locks
("rds: Make sure transmit path and connection tear-down does not run
concurrently"); patches 5 and 6 do the same for the two
rds_send_path_reset() call sites upstream.
Making teardown block on the bits as locks promotes several latent
ordering bugs from rare to load-bearing, so they are fixed first:
Patches 1 and 2 fix the release side of the two bit locks.
release_in_xmit() and release_refill() both clear their bit and then
test for waiters, but the barrier is on the wrong side of the clear
to order the critical section's stores before the release, and the
waiter check does not order against the clear. Once teardown blocks
on these bits as locks (uninterruptible and untimed), a lost wake-up
or a store observed out of order stops mattering only in theory.
Use clear_bit_unlock() and wq_has_sleeper(), the pattern already
half-present in release_in_xmit().
Patch 3: rds_conn_path_reset() wipes the whole cp_flags word with a
plain store. Once teardown owns bits in that word across the reset,
a blanket store would end lock ownership early - and it already
races atomic RMWs on the same word today. Clear the bits the reset
is responsible for individually, as Oracle UEK also does.
Patch 4: rds_tcp_reset_callbacks() stores RDS_CONN_RESETTING
unconditionally, which can overwrite the RDS_CONN_ERROR or
RDS_CONN_DISCONNECTING of a shutdown already in progress on the same
path and send that shutdown through an extra drop cycle. Once the
accept path can park for the duration of a teardown (patch 6) that
window widens, so make the transition conditional first, as Oracle
UEK does.
With those in place, patch 5 converts rds_tcp_reset_callbacks() from
waiting on RDS_IN_XMIT to acquiring it, holding it across the socket
swap and rds_send_path_reset(), and patch 6 has rds_conn_shutdown()
hold both bit locks across the transport shutdown and path reset.
Patch 7 fixes a pre-existing teardown-state hole that this series
makes easier to hit but did not introduce. Since commit
e97656d03c the final transition in rds_conn_shutdown() accepts
RDS_CONN_ERROR as well as RDS_CONN_DISCONNECTING, so that a FIN
processed during the teardown does not derail the shutdown. But
consuming that RDS_CONN_ERROR also consumes the shutdown pass that a
concurrent rds_conn_path_drop() queued along with it. For a FIN that
is harmless; for rds_tcp_accept_one() it is not. A drop can race the
accept's DOWN -> CONNECTING path claim, the accept then installs the
freshly accepted socket while the drop's teardown - which sampled
tc->t_sock before that socket existed - is still running,
rds_connect_path_complete() fails and drops the path again, and if the
in-flight shutdown's final transition then swallows that
RDS_CONN_ERROR, the pass that should reap the just-installed socket
finds the path already RDS_CONN_DOWN and does nothing. The socket is
leaked with its callbacks armed and its rds_tcp_connection still on
rds_tcp_tc_list, the peer sees an established connection that nothing
reads, and the path wedges in RDS_CONN_DOWN. Make the final
transition DISCONNECTING -> DOWN only and leave a racing drop's
RDS_CONN_ERROR alone, so the pass it queued runs and tears down
whatever attached to the path; the branch quiesces the reconnect
timer itself, since a pending destroy can suppress that pass (see the
changes below).
This surfaced while re-reviewing v3: whether the
release-then-transition ordering in patch 6 could let a woken waiter
install a socket that the teardown then strands. Chasing that down,
the reachable form of the leak turned out to be the accept-vs-drop
race above rather than the parked-waiter path (a path mid-teardown is
never handed to rds_tcp_reset_callbacks(): rds_tcp_accept_one_path()
only claims a path it can move DOWN -> CONNECTING), and it predates
this series. It reproduces on an instrumented kernel - a test-only
drop injected into the accept window plus a widened teardown-to-tail
window - as an ESTABLISHED socket with an ever-growing receive queue
on a path stuck down; the same kernel runs clean with patch 7.
The set was built per-commit, run through the rds selftests (tcp and
rdma/rxe), and exercised with a connection/netns churn load and
module load/unload cycles; the patch 7 destroy-window fix was
additionally verified against an instrumented kernel that reproduces
the timer-left-armed WARN deterministically (fires on every destroyed
path unfixed, silent with the fix).
====================
Link: https://patch.msgid.link/20260828223921.202913-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_conn_shutdown() finishes by moving the path from
RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts
RDS_CONN_ERROR as the starting state of that final transition, so that
a FIN processed in softirq context during the teardown does not derail
the shutdown into a noisy error path.
But consuming that RDS_CONN_ERROR also consumes the shutdown pass that
came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues
cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN
is a no-op. For the FIN case that is harmless - the socket the FIN
arrived on is the very socket the teardown just released. It is not
harmless for a dropper that attached something to the path first.
rds_tcp_accept_one() is such a dropper. Its path claim in
rds_tcp_accept_one_path() transitions RDS_CONN_DOWN ->
RDS_CONN_CONNECTING, and a concurrent drop - a FIN on a previous
socket in softirq context, an administrative reset - can put the path
into RDS_CONN_ERROR between that claim and the state check that
follows, which accepts RDS_CONN_ERROR. The accept then installs the
freshly accepted socket with rds_tcp_set_callbacks() while the queued
teardown - which sampled tc->t_sock before this socket existed - is
still running. rds_connect_path_complete() fails its transition to
RDS_CONN_UP and drops the path again, queueing the pass that should
reap the socket it just installed. If the in-flight shutdown's final
transition consumes that drop's RDS_CONN_ERROR, the queued pass finds
the path in RDS_CONN_DOWN and does nothing. The installed socket is
never torn down: it sits established with its callbacks armed and its
rds_tcp_connection on rds_tcp_tc_list, the peer sees a connection that
nothing ever reads, and the path is wedged in RDS_CONN_DOWN until some
later event drops it again. Reproduced with widened race windows as
an ever-growing receive queue on a socket owned by a path stuck in
RDS_CONN_DOWN, with the peer's send path wedged behind it.
Make the final transition only DISCONNECTING -> DOWN. If it fails
because the path is in RDS_CONN_ERROR, a drop raced the teardown:
cancel the reconnect timer and clear RDS_RECONNECT_PENDING - the one
piece of the skipped tail that must not be left behind - and return,
letting the pass the drop queued finish the job: it tears down
whatever attached to the path in the meantime, completes the
transition to RDS_CONN_DOWN, and re-arms the reconnect from its own
tail.
The timer quiesce in that branch matters because the racing drop does
not always queue that pass: rds_conn_path_drop() returns without
queueing when a destroy is pending - exactly the situation during a
netns teardown or module unload, when a FIN on the dying socket is
processed while rds_conn_path_destroy() flushes cp_down_w. If the
flushed pass is the one that takes this return, no later pass exists,
and rds_conn_path_destroy() would find cp_conn_w still armed
(WARN_ON) and then free a path whose reconnect timer can still fire.
With the cancel in the branch, every exit of a shutdown pass leaves
the timer quiesced no matter which pass completes the transition.
The FIN case keeps making progress, one pass later and still without
noisy logging. Any other state keeps today's rds_conn_path_error()
handling; no current cp_state writer can leave a DISCONNECTING path
in anything but RDS_CONN_ERROR (every other writer is a cmpxchg from
a non-DISCONNECTING state), so that branch is defensive.
On kernels without the preceding patches the same hazard exists with
the sample-based quiesce; the fix applies there equally.
Fixes: e97656d03c ("rds: tcp: allow progress of rds_conn_shutdown if the rds_connection is marked ERROR by an intervening FIN")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260828223921.202913-8-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset(). Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.
The sender does recheck the connection state after taking the lock,
but that recheck is a classic store-buffering pattern: teardown writes
the state and reads the bit while the sender writes the bit and reads
the state. acquire_in_xmit() is only an acquire operation, so on
weakly ordered architectures both sides can miss each other's write,
and the transmit path then runs while the transport zeroes its rings
(e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the
transmit state under it.
Oracle UEK fixed the same class of crashes - a 14-year tail of
BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL
dereferences in rds_ib_send_cqe_handler() during failover testing -
by making the teardown path *acquire* the fastpath bit locks instead
of testing them ("rds: Make sure transmit path and connection
tear-down does not run concurrently"). Ownership of a single word is
decided by RMW atomicity, so no cross-variable ordering is needed.
Do the same here: take both locks before calling the transport
shutdown, hold them across rds_conn_path_reset(), and release them
explicitly with a wake-up afterwards. Both are released with
clear_bit_unlock(), so that the ring re-initialization done by the
transport shutdown and the transmit state rewritten by
rds_send_path_reset() are ordered before either bit is seen clear by
the next acquire_in_xmit() or acquire_refill().
The fastpath users of these bits - rds_send_xmit() and
rds_ib_recv_refill() - are trylock style and back off while teardown
owns the locks, so no new lock dependency is introduced for them.
rds_tcp_reset_callbacks() is different: since the previous patch it
acquires RDS_IN_XMIT as well, and it blocks doing so, so its wait now
spans the teardown instead of at most one send batch. That waiter
runs from rds_tcp_accept_one() on the single-threaded krdsd workqueue
and holds rds_tcp_accept_lock and t_conn_path_lock while it waits, so
a duelling SYN accepted while its path is being torn down parks
accept processing for the duration of the teardown - for TCP bounded
by the (up to 5 s) drain loop in rds_tcp_conn_path_shutdown(). An IB
path's drain in rds_ib_conn_path_shutdown() has no round cap, but no
blocking waiter either: rds_tcp_reset_callbacks() is the only blocking
acquirer of these bits and waits only on its own TCP path, and the
fastpaths are trylock-and-back-off on both transports, so a long IB
drain lengthens only that path's own quiesce. The
window is narrow: the accept-side state check has to pass before the
teardown moves the path to RDS_CONN_DISCONNECTING.
Because krdsd is a single global workqueue, everything else queued
there - accept processing for other connections and network
namespaces, and the flush_workqueue(rds_wq) in rds_tcp_listen_stop()
during namespace teardown - waits behind the parked accept worker for
that time. It cannot deadlock, although the waits do point at each
other: the teardown blocks until the bit's holder releases it, and
the holder may be that krdsd accept worker. The holder finishes
without needing anything the teardown owns: the sync cancels
rds_tcp_reset_callbacks() issues target cp_send_w and cp_recv_w on
the path's ordered cp_wq, whose only execution slot is occupied by
the blocked cp_down_w itself, so they are pending at most and cancel
without flushing - a reliance on cp_wq being ordered that is now
noted next to those cancels (on the allocation-failure fallback where
a path shares rds_wq, the work items simply serialize).
Nor is the blocking wait itself new: rds_tcp_reset_callbacks() has
waited on RDS_IN_XMIT from the krdsd work item since
commit 335b48d980 ("RDS: TCP: Add/use rds_tcp_reset_callbacks to
reset tcp socket safely"); this patch stretches its worst case from
a sender's batch to the teardown's drain. The alternative to parking
is the accept path racing the teardown, which is what these patches
close; making the teardown itself non-blocking is a separate item.
One observable side effect: the SENDING flag reported by rds-info has
always mirrored RDS_IN_XMIT, so it now also covers the window where
teardown owns the bit.
The comments that describe the old sample-based handshake or name
rds_send_xmit() as the only other holder of these bits - in
rds_send_xmit(), above rds_conn_path_reset(), in rds_ib_recv_refill()
and in rds_tcp_reset_callbacks() - are updated to match.
For anyone backporting this patch standalone: it depends on
"net/rds: clear cp_flags bits individually in rds_conn_path_reset()"
and "net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()"
earlier in this series. Without the former, the blanket cp_flags
clear in rds_conn_path_reset() would drop both held bits in the middle
of the teardown; without the latter, rds_tcp_reset_callbacks() would
still sample t_sock without owning RDS_IN_XMIT. "net/rds: use
clear_bit_unlock() in release_refill()" is needed for the refill
side's release to pair with the acquire added here, and the follow-up
"net/rds: don't let rds_conn_shutdown() consume a concurrent drop"
completes the teardown-state handling for the waiter this patch
parks; a backport should carry all four.
Fixes: 0f4b1c7e89 ("rds: fix rds_send_xmit() serialization")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
[achender: reimplement for net-next shutdown path: acquire the existing
RDS_IN_XMIT/RDS_RECV_REFILL bit locks in rds_conn_shutdown() and release
after teardown; update comments and commit message]
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260828223921.202913-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_tcp_reset_callbacks() quiesces the transmit path by setting the
path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to
be sampled clear before swapping the underlying socket and calling
rds_send_path_reset().
Sampling the bit clear is not the same as owning it: rds_send_xmit()
can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its
state recheck after taking the lock is a store-buffering pattern (the
resetter writes the state and reads the bit, the sender writes the
bit and reads the state) and acquire_in_xmit() is only an acquire
operation, so on weakly ordered architectures both sides can miss
each other's write and the transmit path then runs concurrently with
rds_send_path_reset() rewriting cp_xmit_* state - which is exactly
what the comment above rds_send_path_reset() tells its callers to
prevent.
Take the lock instead, hold it across the socket swap and
rds_send_path_reset(), and release it with a wake-up at the end. The
lock-ordering constraint documented above the wait still holds: the
lock is acquired before lock_sock(), so a sender inside tcp_sendmsg()
can never be waited on while we hold the socket lock.
Two details of the old code go away with the same change:
- t_sock is now read only after the lock is acquired. The old code
cached it before waiting; the teardown in rds_conn_shutdown()
releases that socket and clears t_sock, so a pointer cached before
the wait can be stale by the time the accept path resumes. Reading
it under RDS_IN_XMIT is what makes the exclusion complete once the
teardown owns the same lock, which the next patch arranges; until
then the teardown still only samples the bit, and the two paths
remain as exposed to each other as they are today.
- The old !osock early path called rds_send_path_reset() with no
serialization at all. It now runs under the lock like the normal
path. The conditional RDS_CONN_RESETTING transition of the
previous patch happens before the socket check either way: a path
found without a socket is either still connecting (its reconnect
worker blocked on t_conn_path_lock) and legitimately goes
RESETTING -> UP on the new socket, or it has been torn down
meanwhile and is dropped.
The in-function comment describing the old wait-based quiesce is
rewritten to describe the lock-based one, and the stale block comment
above the function (which still described a return value and an
incomplete list of t_sock writers) is refreshed to name all four
writers - the connect, accept, teardown and swap paths - and what
serializes each of them.
Fixes: 335b48d980 ("RDS: TCP: Add/use rds_tcp_reset_callbacks to reset tcp socket safely")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260828223921.202913-6-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_tcp_reset_callbacks() resolves a duelling SYN by storing
RDS_CONN_RESETTING into cp_state unconditionally. Nothing serializes
that store against the shutdown path: rds_tcp_accept_one() checks
for RDS_CONN_CONNECTING or RDS_CONN_ERROR under t_conn_path_lock, but
neither rds_conn_path_drop(), which forces RDS_CONN_ERROR, nor
rds_conn_shutdown(), which moves the path to RDS_CONN_DISCONNECTING
under cp_cm_lock, takes that lock. The store can therefore land on
top of a shutdown that is already in progress, or that gets queued
right after the accept-side check.
When it does, the shutdown worker's final DISCONNECTING -> DOWN
transition fails and the path goes through rds_conn_path_error() and
a second drop/shutdown cycle instead of a clean reconnect, tearing
down the socket the accept path has just installed. Before commit
ad22d24be6 ("net/rds: No shortcut out of RDS_CONN_ERROR") a path
found in RDS_CONN_RESETTING even made rds_conn_shutdown() bail out
altogether.
Make the transition conditional: move CONNECTING -> RESETTING (or
stay in RESETTING from an earlier duel), and drop the path in any
other state. The drop has side effects of its own: it replaces the
shutdown's RDS_CONN_DISCONNECTING (or RDS_CONN_ERROR) with
RDS_CONN_ERROR and queues one more cp_down_w run. The difference is
that rds_conn_shutdown() accepts RDS_CONN_ERROR in its final
transition to RDS_CONN_DOWN, so the shutdown in flight completes
normally instead of through rds_conn_path_error(); the extra
down-work pass then finds the path already down and falls through to
the reconnect check, or catches a reconnect that has already started
and restarts it. The accept path still installs the new socket,
rds_connect_path_complete() then fails its RESETTING -> UP transition
and drops it: the raced socket ends up torn down as it does today.
The comment at that call site, which promised that
rds_connect_path_complete() marks the path RDS_CONN_UP, is updated to
name this outcome as well.
The state can change again between the failed transitions and the
drop. That is inherent to rds_conn_path_drop(), which the socket
state-change callbacks also call unconditionally, and costs at most
one extra drop/reconnect cycle.
Based on Oracle UEK commit "net/rds: Don't force state
RDS_CONN_RESETTING" by Gerd Rausch.
Fixes: 9c79440e2c ("RDS: TCP: fix race windows in send-path quiescence by rds_tcp_accept_one()")
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
[achender: port to net-next: use the two-argument
rds_conn_path_transition()/rds_conn_path_drop() and rewrite the
changelog for the upstream shutdown path]
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260828223921.202913-5-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_conn_path_reset() wipes the whole flag word with a plain
cp->cp_flags = 0 store. Every other accessor of that word uses
atomic bitops, and some of them can run concurrently with the reset:
RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the
transport completion paths, neither of which holds anything that
excludes the shutdown worker. A plain store racing an atomic
read-modify-write on the same word is a data race, and whichever
side loses has its update silently discarded.
Clear the two bits the reset is actually responsible for instead.
RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they
belong to the caller, rds_conn_shutdown(), which waits for both to be
clear before calling the transport shutdown and this reset.
This also gives every bit in cp_flags a single well-defined writer
discipline, which the following patches rely on when they turn
RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the
teardown: a blanket store mid-teardown would destroy lock ownership
that an atomic clear preserves.
Oracle UEK carries the same conversion ("net/rds: Preserve essential
connection state flags"), motivated by its asynchronous shutdown
state machine, whose progress and destroy flags must survive the
reset. UEK's variant also clears RDS_IN_XMIT and RDS_RECV_REFILL
because there the reset runs as the final step of a teardown that
owns both bits, making those clears its unlock. Upstream that
release belongs in rds_conn_shutdown(): once a later patch in this
series turns the two bits into locks held across the teardown, ending
ownership needs release semantics and a wake-up that a plain clear
inside the reset would not provide.
Based on Oracle UEK commit "net/rds: Preserve essential connection
state flags" by Gerd Rausch.
Fixes: 00e0f34c61 ("RDS: Connection handling")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260828223921.202913-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
release_refill() drops the RDS_RECV_REFILL bit with a plain
clear_bit(). clear_bit() has no ordering semantics, and the
smp_mb__after_atomic() that follows it sits on the wrong side for a
lock release: it orders the clear against the waitqueue_active() load
below it, but does nothing to order the refill critical section's ring
and descriptor stores before the clear itself.
That matters once connection teardown owns RDS_RECV_REFILL as a lock
across the transport shutdown and path reset, rather than sampling it
clear, which "net/rds: acquire the fastpath locks in
rds_conn_shutdown()" later in this series arranges: on a weakly
ordered architecture the teardown can win the bit and start the
shutdown and reset while some of the refill's stores are not yet
visible to it. The same gap existed under the sample-based scheme - a
waiter that saw the bit clear had no guarantee it also observed the
refill's stores - but taking the bit as a lock makes the missing
release pairing load-bearing.
Switch to clear_bit_unlock(), which orders the critical section before
the release, and replace the open-coded barrier-plus-waitqueue_active()
with wq_has_sleeper(), whose internal full barrier keeps the
store-buffering guarantee between clearing the bit and checking for
sleepers. This mirrors what "net/rds: use wq_has_sleeper() in
release_in_xmit()" does for RDS_IN_XMIT.
The fast-path acquire side, acquire_refill(), uses test_and_set_bit(),
a full-barrier RMW that pairs with this release. The teardown at this
point in the series still samples the bit, so on its own this change
is release-side hardening; the shutdown-conversion patch named above
makes the teardown acquire the bit with the same RMW, completing the
pairing at the end of the series.
Fixes: 73ce4317bf ("RDS: make sure we post recv buffers")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260828223921.202913-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then
checks waitqueue_active() to decide whether anyone needs waking.
clear_bit_unlock() is only a release operation: it orders the
critical section before the bit clear, but does not order the
subsequent plain load of the wait queue head after it. The waiter
side does the mirror image - it adds itself to the wait queue and
then tests the bit. That is the classic store-buffering pattern: the
releasing CPU can read the wait queue as empty while the waiting CPU
still reads the bit as set, so the sleeper is never woken.
The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(),
both in uninterruptible wait_event() with no timeout. A lost wake-up
strands the shutdown worker on its single-threaded workqueue until
some other sender releases the bit again - and on a connection that
is being torn down precisely because it failed, there may never be
another sender.
The barrier used to be there: release_in_xmit() did clear_bit()
followed by smp_mb__after_atomic() until commit 1422f28826 ("rds:
introduce acquire/release ordering in acquire/release_in_xmit()")
folded both into clear_bit_unlock(), which strengthened the lock
hand-off but silently dropped the full barrier the wake-up check
depends on. The refill counterpart, release_refill() in
net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for
exactly this reason.
Use wq_has_sleeper(), which is waitqueue_active() preceded by the
required full barrier.
Fixes: 1422f28826 ("rds: introduce acquire/release ordering in acquire/release_in_xmit()")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260828223921.202913-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Compal EXM-G1x is a Qualcomm SDX12-based LTE modem. Add support for
its QMI WWAN interface 8 using the DTR quirk.
Tested on a Compal EXM-G1x modem.
Signed-off-by: Ian Lin <jisayme@gmail.com>
Link: https://patch.msgid.link/20260831084124.65074-1-jisayme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Frames for which macb_pad_and_fcs() supplies the FCS have four FCS
bytes appended, and TX completion then accounts the grown skb->len.
tx_bytes is defined to exclude the FCS, so these frames are reported
four bytes too large.
Track only the number of FCS bytes appended in software, 0 or
ETH_FCS_LEN, and subtract that from skb->len at completion. skb->len
already reflects the padded length by then, so there is nothing else
to store. macb_pad_and_fcs() already returns 0 on every non-error
path. Return the FCS length from there instead, rather than
recomputing the same check in the caller. BQL stays on the padded
skb->len that netdev_tx_sent_queue() saw.
Fixes: 653e92a917 ("net: macb: add support for padding and fcs computation")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260831113128.1678674-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case.
Fixes: b08123684b ("net: bridge: mcast: install S,G entries automatically based on reports")
Cc: stable@vger.kernel.org
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Reported-by: TencentOS Corvus AI <corvus@tencent.com>
Signed-off-by: Jun Yang <junvyyang@tencent.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260831111330.199543-1-junvyyang@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When releasing all slaves during bond destruction (all == true),
__bond_release_one() unconditionally clears bond->curr_active_slave to
NULL in every iteration.
If a backup slave is released before the active slave,
bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(),
which increments the active slave dev promiscuity counter and sets
bond_info->primary_is_promisc = 1.
Because bond->curr_active_slave was prematurely cleared to NULL when
releasing the backup slave, the subsequent iteration releasing the active
slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL)
is skipped. Consequently, bond_alb_handle_active_change() is never called
to decrement the promiscuity counter, permanently leaking promiscuous
mode on the physical device after bond teardown.
When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets
bond->curr_active_slave to NULL. We only need to avoid selecting a new
active slave when all == true. Replace the if (all) branch with
if (!all && oldcurrent == slave).
Fixes: 0896341a44 ("bonding: fix bond_release_all inconsistencies")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260831203042.164466-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case for a BPF_PSEUDO_FUNC load instruction that references
the entry function of the program it belongs to. W/o the previous
patch the verifier accepts this program thus allowing a runtime call
at a bogus address. See previous patch for detailed description.
Main function needs to be marked with BTF_FUNC_STATIC for the test to
trigger the bug, the patch uses test_verifier harness instead of
test_prog because libbpf has no way to convey this.
Reported-by: Nicholas Carlini <npc@anthropic.com>
Suggested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260902233658.1186477-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real
function addresses. This function is invoked from bpf_jit_subprogs()
only when env->subprog_cnt > 1. Meaning that for any program like
below:
int main(void *ctx) {
void *ptr = main;
...
bpf_timer_set_callback(..., ptr);
...
}
The 'ptr' won't be ever converted to contain an address.
In combination with e.g. bpf_timer_set_callback() this would lead to a
function call at a bogus address.
Instead of complicating the implementation, just assume that no useful
program needs main to be a sync or async callback and reject
BPF_PSEUDO_FUNC loads for the main subprogram.
Fixes: 69c087ba62 ("bpf: Add bpf_for_each_map_elem() helper")
Reported-by: Nicholas Carlini <npc@anthropic.com>
Suggested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260902233658.1186477-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__within_kprobe_blacklist() traverses kprobe_blacklist without holding
kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist()
removes blacklist entries and immediately frees them with kfree().
A concurrent call to within_kprobe_blacklist() can therefore dereference
freed memory.
Furthermore, within_kprobe_blacklist() can be called in atomic or
non-preemptible contexts where the sleeping kprobe_mutex cannot be taken.
Protect kprobe_blacklist with RCU. Use guard(rcu)() and
list_for_each_entry_rcu() for traversal, list_add_tail_rcu() for
insertions, list_del_rcu() for deletions, and kfree_rcu() to reclaim
entries safely after a grace period.
Link: https://lore.kernel.org/all/178810004323.64882.16493230858653316962.stgit@devnote2/
Fixes: 376e242429 ("kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260807155802.F06041F000E9@smtp.kernel.org/
Assisted-by: Antigravity:gemini-3.7-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and
fprobe events) are created in traceprobe_define_arg_fields() by handing
the probe_arg name/type strings to trace_define_field(), which only
stores the pointers without copying. Those strings are owned by the
trace_probe and are freed when that probe is removed.
An event can have several probes attached. The field list is defined
only once, by the first probe that registers the event, but it is kept
alive by any surviving sibling probe. Deleting just that first probe by
symbol -
# primary A: fields are defined from A's args
echo 'p:kprobes/ev vfs_read a1=$arg1' > kprobe_events
# append B: shares A's event call
echo 'p:kprobes/ev vfs_write a1=$arg1' >> kprobe_events
# delete only A (matched by symbol), B survives
echo '-:kprobes/ev vfs_read' >> kprobe_events
frees A's args (trace_probe_cleanup() -> traceprobe_free_probe_arg()),
but trace_probe_unlink() keeps the trace_probe_event because the probe
list is not empty. The event call stays registered via B while its
fields now reference freed memory. Any field lookup then reads it, e.g.
echo 'a1 == 1' > events/kprobes/ev/filter
BUG: KASAN: slab-use-after-free in strcmp+0xa7/0xb0
Call Trace:
strcmp
trace_find_event_field
parse_pred
process_preds
create_filter
apply_event_filter
event_filter_write
field->name references parg->name (kstrdup'd, freed with the probe) and,
for array arguments, field->type references parg->fmt (kmalloc'd, freed
with the probe) - the scalar type otherwise points at the static
fmttype rodata, which is safe.
Have traceprobe_define_arg_fields() duplicate the name and type strings
and anchor the copies on the trace_probe_event, which embeds the event
call and outlives every individual probe; trace_probe_event_free()
releases them.
The reproducer above triggers reliably; the field lookup and the delete
both run under event_mutex, so this is a dangling reference after
removal rather than a race.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab.
Link: https://lore.kernel.org/all/20260826030009.1855331-1-bsdhenrymartin@gmail.com/
Fixes: ca89bc071d ("tracing/kprobe: Add multi-probe per event support")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
btf_find_struct_member() traverses into nested anonymous structures and
unions to find a struct member. However, get_bitoffset_of_field() in
trace_probe.c checked btf_type_kflag(type) using the outer parent type
instead of the actual anonymous structure/union that directly contains
the found member.
If the parent structure and anonymous structure have mismatched kflags
(e.g., the parent has kflag=0 while the anonymous structure has kflag=1
because it contains bitfields), the bitfield size encoded in the upper
8 bits of member->offset is erroneously treated as part of the byte/bit
offset, corrupting the resolved offset and failing to set last_bitsize.
Similarly, btf_find_struct_member() pushed anonymous member offsets
onto anon_stack without masking BTF_MEMBER_BIT_OFFSET() when kflag is set.
To fix this problem, update btf_find_struct_member() to return actual
containing structure/union type via member_type, use appropriate
__btf_member_bit_offset() to get bit offset, and use member_type for
btf_type_kflag() in get_bitoffset_of_field().
Link: https://lore.kernel.org/all/178827250904.123716.17452648791331881284.stgit@devnote2/
Fixes: c440adfbe3 ("tracing/probes: Support BTF based data structure field access")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260822095110.0772E1F000E9@smtp.kernel.org/
Assisted-by: Antigravity:gemini-3.7-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
btf_find_struct_member() traverses into nested anonymous structures
and unions by pushing members with !member->name_off onto anon_stack.
However, it does not consider the unnamed bitfields (e.g. `int : 5`
or `unsigned int : 0`) which also have member->name_off == 0.
If such an unnamed bitfield is pushed to anon_stack, the
btf_find_struct_member() return an error even if there are other
valid entries in anon_stack.
To fix this, only push unnamed struct/union members to anon_stack.
Also move the btf_type_is_struct() check to the entry of this function
because now it is sure only struct/union are pushed to anon_stack.
Link: https://lore.kernel.org/all/178827249775.123716.7813217688423513612.stgit@devnote2/
Fixes: 302db0f5b3 ("tracing/probes: Add a function to search a member of a struct/union")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260830143859.D56991F00A3D@smtp.kernel.org/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
- Default randstruct off with rust for better allmodconfig coverage
(Mark Brown)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaphPQAAKCRA2KwveOeQk
u+JmAP9tcRZkdQkz5oBGNN58SB1eeJ/AQOuOXvqr+fe9Hw0wnQD+OylI5IR5cN9K
7dCHFDbAd3prFT648fnmMlPhBrTpwAw=
=x6kf
-----END PGP SIGNATURE-----
Merge tag 'hardening-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fix from Kees Cook:
- Default randstruct off with rust for better allmodconfig coverage
(Mark Brown)
* tag 'hardening-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
hardening: Default randstruct off with rust for better allmodconfig support
need to pad before __u64 tcc_disabled_mask variable.
This patch fixes 64bit Kernel + 32 bit mesa combination. But at the same
time it will break 32bit Kernel(using this patch) + older 32bit mesa(not
using this patch).
This issue was discussd with alexander.deucher@amd.com,
christian.koenig@amd.com and pierre-eric.pelloux-prayer@amd.com.
Currently today 32 bit kernel + 32 bit userspace and 64 bit kernel and
64 bit userspace work. Mixed 64 bit kernel and 32 bit userspace is
currently broken. Since 32 bit kernel and userspace is probably pretty
rare these days and the data affected by this is not critical, Hence
we can go ahead with this patch.
Fixes: cf21e76a60 ("drm/amdgpu: return tcc_disabled_mask to userspace")
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 497b5090f2857ef8ad9a162aa31ada0de5814663)
[WHY]
resource_can_pipe_disable_cursor() disables the hardware cursor on a
pipe when a higher layer fully covers that pipe's recout, to avoid
double-cursor and scaling artifacts.
When merging pipe-split halves of the same overlay layer, the inner
loop walks every pipe above the current one and looks for siblings
sharing test_pipe's layer_index. Because test_pipe itself satisfies
that condition, it can be treated as its own split partner. That
incorrectly doubles r2.width and makes the covering check succeed even
when the overlay does not fully contain the underlying pipe.
On horizontally split or multi-quadrant layouts this causes the cursor
to disappear over overlay regions while input/coordinate mapping remains
correct.
[HOW]
Skip test_pipe when searching for a pipe-split sibling on the same
layer, so only the other half of the split plane is merged into r2.
Signed-off-by: Yuling Li <yulingli@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 85ccd2c39cca9351d4db393e24acea8bf943d350)
If a queue fails to map that we need to return the error code back
to the caller and not overwrite with a success specifically.
Accumulate the failure and return that.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 42a0197d10039e9518c0324c43331eb22b44d5f8)
Psp runtime DB is for dGPUs only.
Signed-off-by: Kanala Ramalingeswara Reddy <Kanala.RamalingeswaraReddy@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dce8195027f146467c9378efb2bb1b0859cb735e)
Cc: stable@vger.kernel.org
Update to the latest stable fw versions where userqueues
is working as it is expected with major fixes.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 69fa36e3ac92f2544ee7a1b719ec212b8247a2da)
Cc: stable@vger.kernel.org
Update to the latest stable fw versions where userqueues
is working as it is expected with major fixes.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d50201b891604ab97f305d4a20d888ba93305b48)
Cc: stable@vger.kernel.org
In amdgpu_devcoredump_print_ibs(), the NO_CPU_ACCESS VRAM path passed
cursor.start/4 and cursor.size/4 to amdgpu_device_mm_access(), but that
function's pos/size parameters are byte offsets/lengths (confirmed by
amdgpu_ttm_vram_mm_access() and leading to wrong size calculation.
Similarly with that change the off index needs to be calculated
based on dword since that is a u32 type.
Fixes: 7b15fc2d1f ("drm/amdgpu: dump job ibs in the devcoredump")
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1bd613b0ed98a23575b18674c94b8b3392614681)
Cc: stable@vger.kernel.org
Reading /sys/kernel/debug/kfd/mqds while a process holds an active KFD
queue triggers a NULL pointer dereference because the for loop that
calls mqd_mgr->debugfs_show_mqd() is incorrectly placed outside the
if (pqn->q) block that initializes mqd_mgr.
The queue list can contain entries where pqn->q is NULL (kernel queues
where only pqn->kq is valid). In the original code:
if (pqn->q) {
...
mqd_mgr = q->device->dqm->mqd_mgrs[mqd_type];
size = mqd_mgr->mqd_stride(...);
}
for (xcc = 0; xcc < num_xccs; xcc++) { // WRONG: outside if block
mqd = q->mqd + size * xcc;
r = mqd_mgr->debugfs_show_mqd(m, mqd);
}
When iterating over a queue node where pqn->q is NULL:
1. The if (pqn->q) block is skipped
2. mqd_mgr remains uninitialized (NULL from declaration)
3. The for loop executes anyway
4. mqd_mgr->debugfs_show_mqd(m, mqd) dereferences NULL
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
RIP: 0010:0x0
Call Trace:
pqm_debugfs_mqds+0x10c/0x1d0 [amdgpu]
kfd_debugfs_mqds_by_process+0x9b/0x110 [amdgpu]
seq_read_iter+0x132/0x4b0
...
Fix by moving the for loop inside the if (pqn->q) block, so mqd_mgr
and related variables are only used when properly initialized.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5689
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260831130051.2031435-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8bfe29d5c798940f797aa24135d2734c3ffce9de)
Cc: stable@vger.kernel.org
get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity,
which is zeroed by reset_bw_alloc_struct() and only populated once
DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled.
link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler,
calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED
is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED
has ever fired for that link. A connected USB4/DPIA tunneling device
that reports an estimated-bandwidth change before ever reporting a
capability change drives a division by zero in this IRQ path.
link_dpia_send_bw_alloc_request() already guards the same
bw_granularity division; add the identical guard here rather than
introducing a new pattern.
Fixes: 8e5cfe547b ("drm/amd/display: upstream link_dp_dpia_bw.c")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Assisted-by: gkh_clanker_t1000
Signed-off-by: Hari Mishal <harimishal1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f2a961457c33dc34223aad5c9e8971de34a4eed3)
Cc: stable@vger.kernel.org
In encode-to-linear conversions, LUT entries should be uniformly
distributed across the input range: non-linear encodings are already
approximately perceptually uniform, so every input code carries the same
weight. A fixed count per region does the opposite, concentrating
entries on the darker values and leaving few for the bright end, whereas
halving distribution spaces all 256 entries uniformly. This holds for
any encoded input, so remove the PQ/sRGB condition from commit
"drm/amd/display: use halving distribution for PQ/sRGB linearizing LUT"
and apply halving to all encode-to-linear operations
(pre-defined TF or user LUTs).
It fixes the following IGT kms_colorop subtests:
- plane-XR30-XR30-srgb_inv_eotf_lut-srgb_eotf_lut
- plane-XR30-XR30-gamma_2_2-gamma_2_2_inv-gamma_2_2
Fixes: a71d2b051f ("drm/amd/display: use halving distribution for PQ/sRGB linearizing LUT")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6df7c9c307e72e7f13829e94edc89134f0764775)
