Use IMX283_STANDBY (bit 0) instead of IMX283_STBLOGIC (bit 1) when
stopping streaming. STBLOGIC only puts the sensor logic into standby but
leaves the MIPI interface (along with other components) in an
indeterminate state.
This (presumably) causes the CSI receiver (e.g. Raspberry Pi's CFE) to
miss the LP-11 to HS transition when streaming restarts, resulting in a
hang of 10+ seconds. The issue is most visible when immediately
restarting a full-resolution stream after stopping a 3x3 binned one, so
that runtime suspend hasn't yet been triggered.
Writing IMX283_STANDBY puts the entire sensor into standby. The
imx283_standby_cancel() sequence already handles the full wakeup from
this suspended state.
Cc: stable@vger.kernel.org
Link: https://github.com/raspberrypi/linux/issues/7153
Link: https://github.com/will127534/OneInchEye/issues/12
Fixes: ccb4eb4496 ("media: i2c: Add imx283 camera sensor driver")
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by max9286_gpiochip_get() is
normalized to the [0, 1] range.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Dell XPS 13 9340 and XPS 14 9440 have an upside-down mounted OV02C10
sensor, just like the XPS 13 9350 and XPS 16 9640 models.
Extend the existing DMI matches for handling these laptops with DMI
matches for these 2 models
Reported-by: Heimir Thor Sverrisson <heimir.sverrisson@gmail.com> # XPS 14 9440
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2440581 # XPS 13 9340
Fixes: d5ebe3f7d1 ("media: ov02c10: Fix default vertical flip")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Three control cases (AUTOGAIN, EXPOSURE_AUTO, ANALOGUE_GAIN) directly
return without calling pm_runtime_put(), causing runtime PM reference
count leaks.
Change these cases from 'return' to 'ret = ... break' pattern to ensure
pm_runtime_put() is always called before function exit.
Fixes: 4f66f36388 ("media: i2c: ov5647: Convert to CCI register access helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In a error path isp->psys is confirmed to be an error pointer not NULL so
this condition is true and the error pointer is dereferenced. So isp-psys
should be set to NULL before going to out_ipu6_bus_del_devices.
Detected by Smatch:
drivers/media/pci/intel/ipu6/ipu6.c:690 ipu6_pci_probe() error:
'isp->psys' dereferencing possible ERR_PTR()
Fixes: 25fedc0219 ("media: intel/ipu6: add Intel IPU6 PCI device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
[Sakari Ailus: Fix commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the CCS_PLL_FLAG_EXT_IP_PLL_DIVIDER flag is set, odd pre-PLL divider
values are allowed. However, in the operational timing branch the
calculation of the minimum pre-PLL divider incorrectly uses clk_div_even_up,
forcing the minimum value to be even, even if the flag is set. This prevents
selecting a valid odd divider like 3, which may be required for certain
sensor configurations.
Fix this by removing the forced even rounding from the minimum pre-PLL
divider calculation. The loop later uses the flag to determine the step,
so odd values will be considered when the flag is set.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The recent change in commit 20cf2aed89 ("gpio: rockchip: mark the GPIO
controller as sleeping") to mark the rockchip GPIO driver as sleeping
has started triggering the warning at drivers/gpio/gpiolib.c:3523
indicating that a sleepable GPIO was called via the non-sleeping APIs on
the Rock 5B:
<4>[ 14.699308] Call trace:
<4>[ 14.699545] gpiod_get_value+0x90/0x98 (P)
<4>[ 14.699928] tx_5v_power_present+0x44/0xd0 [synopsys_hdmirx]
<4>[ 14.700446] hdmirx_delayed_work_hotplug+0x34/0x128 [synopsys_hdmirx]
<4>[ 14.701031] process_one_work+0x14c/0x28c
<4>[ 14.701405] worker_thread+0x184/0x300
<4>[ 14.701756] kthread+0x11c/0x128
<4>[ 14.702065] ret_from_fork+0x10/0x20
Currently the active use of the GPIO is all done from process context so
can be simply converted to use gpiod_get_value_cansleep(). There is one use
of the GPIO from hard interrupt context but this is only done so the status
can be displayed in a debug print so can simply be deleted without any
functional effect.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Each stream requires CIF_REQ_BUFS_MIN=1 buffers to enable streaming.
However, it failed with only one buffer provided.
Comply with the minimum number of buffers requirement and accept
exactly one buffer.
Fixes: 501802e2ad ("media: rockchip: rkcif: add abstraction for dma blocks")
Cc: stable@kernel.org
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Isaac Scott <isaac.scott@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change these comparisons from > vs >= to avoid accessing one element
beyond the end of the arrays.
While at it, use ARRAY_SIZE instead of the _MAX enum values.
Fixes: 1f2353f5a1 ("media: rockchip: rkcif: add support for rk3568 vicap mipi capture")
Cc: stable@kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Chen-Yu Tsai <wens@kernel.org>
[fix cosmetic issues]
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Switch from s_stream to enable_streams and disable_streams callbacks.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Switch to using the sub-device state lock and properly call
v4l2_subdev_init_finalize() / v4l2_subdev_cleanup() on probe() /
remove().
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the new common CCI register access helpers to replace the private
register access helpers in the ov9282 driver. This simplifies the driver
by reducing the amount of code.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
[Sakari Ailus: Declare ret_hold earlier to make old GCC happy.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add possibility to rely on an additional MDMA channel and chain
the DMA and MDMA channels allowing to achieve faster capture.
Indeed, on the MP15 platform, the MDMA engine has an higher
bandwidth to the DDR than the DMA engine. Relying on that
it is possible to capture frames from the DCMI IP into the DDR
by using two channels as follow:
DCMI -> (DMA) -> SRAM -> (MDMA) -> DDR
The DMA is able by himself to trigger a MDMA request hence, once
properly configured, the DCMI IP can simply trigger the DMA in order
to have the data pushed up to the DDR (via the SRAM and a MDMA
channel).
This behavior is detailed in the document
Documentation/arch/arm/stm32/stm32-dma-mdma-chaining.rst
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add properties update and new sram property necessary in order
to enable the DMA-MDMA chaining.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Overall cleanup done allows to now have the JPEG handling
done in the same way as other formats in continuous mode,
allowing to achieve a faster framerate in all resolutions.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Whenever receiving an OVERRUN event or an end of frame, the driver stops
currently ongoing DMA transfer since the DCMI stops sending data to dma.
Not doing this would lead to having DMA & DCMI no more synchronized in term
of expected data to be copied.
Since this is done in irq handler context, it is not possible to make any
call that would lead to scheduling hence dmaengine_terminate_sync are not
possible.
Since the dcmi driver is NOT using dma callbacks, it is possible thus to
call instead dmaengine_terminate_async (aka without synchronize) and call
again right after a new dmaengine_submit to setup again a new transfer.
And since this is now a dmaengine_submit_async, there is no need to release
the spinlock around calls to the dmaengine_submit_async.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move all the type of frame handling within the dcmi_irq_thread
handler and do not rely on dma_callback as previously.
This simplifies the code by having only a single path for both
compressed and uncompressed data while also making the system
more reactive since irq_handler have more chances to be called
faster than the dma completion callback. Indeed, in case of the
dma completion callback, this run as a tasklet created by the
dma framework upon getting an interrupt from the dma and run
at a lower priority level than other irq handlers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rework of the spin_lock calls in preparation of the rework
of the data handling of the driver. Keep it straight forward
with basically spin_lock protection around everything except
dmaengine calls that might sleep (ex: synchronize / terminate)
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Ensure to stop the dma transfer whenever receiving a overrun
to avoid having a buffer partially filled with a frame and
partially with the next frame.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Perform the dmaengine prep_slave_sg call within buf_prepare and
mark the descriptor as reusable in order to avoid having to redo
this at every start of the dma.
This also allow to remove the mutex used by the driver to protect
dma descriptors related piece of codes.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Perform the dma channel configuration at probe time right after
the channel allocation since this is fixed for the whole lifetime
of the driver.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less heavier for builds
than the use of __maybe_unused attributes.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Slightly different version of MT9M114 camera module is used in a several
devices like ASUS Nexus 7 (2012) or ASUS Transformer Prime TF201 and is
called Aptina MI1040. The only difference found so far is lacking ability
to poll STATE register during power on sequence, which causes driver to
fail with time out error. Add state_standby_polling flag to diverge models
and address quirk found in MI1040.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Aptina MI1040 is a slightly different version of the MT9M114 camera
module. It is used in several devices, such as the ASUS Nexus 7 (2012) and
the ASUS Transformer Prime TF201. The compatible "onnn,mt9m114" is placed
first in the enum, as it is considered the default compatible value.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the new v4l2_subdev_get_frame_desc_passthrough helper for
.get_frame_desc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the new v4l2_subdev_get_frame_desc_passthrough helper for
.get_frame_desc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a helper for v4l2_subdev_pad_ops.v4l2_get_frame_desc operation. The
helper can be used when the subdevice directly passes through the
streams.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With modern drivers supporting link-freq, we don't need to do any
calculations based on the bpp and number of lanes when figuring out the
link frequency. However, the code currently always runs code to get the
bpp and number of lanes.
Optimize the rcsi2_calc_mbps() so that we only do that when needed, i.e.
when querying the link-freq is not supported by the upstream subdevice.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of taking the bpp and the number of lanes as parameters to
rcsi2_calc_mbps(), change the function to get those parameters inside
the function. This centralizes the code a bit and makes it easier to add
streams support.
Also, in the future when the legacy (non-link-freq) code is removed,
there will be no need to change rcsi2_calc_mbps() parameters.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Move the function so that it can call rcsi2_get_active_lanes() in the
following patch.
No functional change intended.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of having four macros for FLD_FLD_EN for different channels,
have just one FLD_FLD_EN(ch).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of having four macros for ISPPROCMODE_DT_PROC_MODE_VC[0123](pm),
have just one ISPPROCMODE_DT_PROC_MODE_VCn(vc, pm).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
DS90UB954-Q1 is an FPDLink-III deserializer that is mostly register
compatible with DS90UB960-Q1. The main difference is that it supports half
of the RX and TX ports, i.e. 2x FPDLink RX ports and 1x CSI TX port.
A couple of differences are between the status registers and the
strobe setting registers. Hence accommodate these differences in
the UB960 driver so that we can reuse a large part of the existing code.
Link: https://www.ti.com/lit/gpn/ds90ub954-q1
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
DS90UB954-Q1 is an FPDLink-III deserializer that is mostly register
compatible with DS90UB960-Q1. The main difference is that it supports
half of the RX and TX ports, i.e. 2x FPDLink RX ports and 1x CSI TX
port. Therefore, add support for DS90UB954 within the existing bindings.
Link: https://www.ti.com/lit/gpn/ds90ub954-q1
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace chip-specific boolean flags with chip_type and chip_family enums.
This simplifies the process of adding support for newer devices and also
improves code readability.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current bindings duplicate the port definitions for each FPD-Link RX
and CSI-2 TX ports. This results in a large amount of repeated schema
blocks and makes it harder to extend the bindings for new devices.
Refactor the bindings by introducing shared deftinitions for FPD-Link
input ports and CSI-2 output ports. No functional change intended.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The starfive-camss driver is no longer being worked upon for destaging,
and will be dropped in a subsequent commit, so drop the DT bindings.
Link: https://lore.kernel.org/all/ZQ0PR01MB13024A92926C415C187D2C18F29F2@ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn/
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The starfive-camss driver is no longer being worked upon for destaging,
as confirmed by the maintainer, so drop it.
Link: https://lore.kernel.org/all/ZQ0PR01MB13024A92926C415C187D2C18F29F2@ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn/
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Arducam IMX577 module requires a longer reset time than the 1000µs
configured in the current driver. Increase the wait time after power-on
to ensure proper initialization.
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Assert the reset GPIO before first power up. This avoids a mismatch where
the first power up (when the reset GPIO defaults deasserted) differs from
subsequent cycles.
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Fixes: 9214e86c0c ("media: i2c: Add imx412 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmmkzjMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGmMQH/Re7EzF7ves6nnmm
ZDxq359yFKG1LpDJj70iaJBLtU5VeEPn4nRi2HjMcTVMUCxL+KSoM4ASImyRgGL2
noo5U7+0nrRc0iI4p4GQQ3Ui13KCoIv6gZy1NG4V/b97FARvKovGBkHkDg3xu04I
AEKyEeFjkKXKDcDI5i9QXPUUfvKBgmGOIG7jAg5Me8qHbvNZ47eSVOormSFQN5iC
laXN1El0q2YsO/bDPgDBJfSkCYZbWXISdtfRfyM3CvqK9Ty9L1hMGwWFq5A74Uzv
c/I3/RjiXsPFggrUt5/L2kUxW89iknQQbMr5H6ze5Ee1a8VwgcjbIJaoHLzhXbMR
lMcZEXk=
=WOBd
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc2' into __tmp-hverkuil-media-tags_br_v7_1a
Linux 7.0-rc2
* tag 'v7.0-rc2': (372 commits)
Linux 7.0-rc2
firewire: ohci: initialize page array to use alloc_pages_bulk() correctly
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
selftests/bpf: Avoid simplification of crafted bounds test
selftests/bpf: Test refinement of single-value tnum
bpf: Improve bounds when tnum has a single possible value
bpf: Introduce tnum_step to step through tnum's members
bpf: Fix race in devmap on PREEMPT_RT
bpf: Fix race in cpumap on PREEMPT_RT
selftests/bpf: Add tests for special fields races
bpf: Retire rcu_trace_implies_rcu_gp() from local storage
bpf: Delay freeing fields in local storage
bpf: Lose const-ness of map in map_check_btf()
bpf: Register dtor for freeing special fields
PCI: Correct PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 value
smb: client: Use snprintf in cifs_set_cifscreds
mm/slab: initialize slab->stride early to avoid memory ordering issues
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
smb: client: fix broken multichannel with krb5+signing
...
* Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
* Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature set
* Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
* Don't leak stage-2 mappings in protected mode
* Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
* Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
* Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
* Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
* Remove internal Kconfigs that are now set on all architectures.
* Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmmkSMUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO2tggAgOHvH9lwgHxFADAOKXPEsv+Tw6cB
zuUBPo6e5XQQx6BJQVo8ctveCBbA0ybRJXbju6lgS/Bg9qQYKjZbNrYdKwBwhw3b
JBUFTIJgl7lLU5gEANNtvgiiNUc2z1GfG8NQ5ovMJ0/MDEEI0YZjkGoe8ZyJ54vg
qrNHBROKvt54wVHXFGhZ1z8u4RqJ/WCmy21wYbwiMgQGXq9ugRRfhnu3iGNO8BcK
bSSh4cP7qusO5Nj0m/XYD/68VwvyogaEkh4sNS1VH0FOoONRWs80Q6iT2HjCGgv6
mAzCx/yB9ziSQRis3oYYEBH23HZxRVDVBeSBlPcbxE3VM7SGzp7O8L692g==
=+mC+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
- Remove internal Kconfigs that are now set on all architectures
- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host
The deferred page initialization prevents debug objects from allocating
slab pages until the initialization is complete. That causes depletion of
the pool and disabling of debugobjects.
The reason is that debugobjects uses __GFP_HIGH for allocations as it might
be invoked from arbitrary contexts. When PREEMPT_COUNT is disabled there is
no way to know whether the context is safe to set __GFP_KSWAPD_RECLAIM.
This worked until v6.18. Since then allocations w/o a reclaim flag cause
new_slab() to end up in alloc_frozen_pages_nolock_noprof(), which returns
early when deferred page initialization has not yet completed.
Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when the
context is preemtible. When PREEMPT_COUNT is disabled the context is
unknown and the reclaim bit can't be set because the caller might hold
locks which might deadlock in the allocator.
That makes debugobjects depend on PREEMPT_COUNT || !DEFERRED_STRUCT_PAGE_INIT,
which limits the coverage slightly, but keeps it functional for most cases.
-----BEGIN PGP SIGNATURE-----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=kvxN
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects.
The deferred page initialization prevents debug objects from
allocating slab pages until the initialization is complete. That
causes depletion of the pool and disabling of debugobjects.
The reason is that debugobjects uses __GFP_HIGH for allocations as it
might be invoked from arbitrary contexts. When PREEMPT_COUNT is
disabled there is no way to know whether the context is safe to set
__GFP_KSWAPD_RECLAIM.
This worked until v6.18. Since then allocations w/o a reclaim flag
cause new_slab() to end up in alloc_frozen_pages_nolock_noprof(),
which returns early when deferred page initialization has not yet
completed.
Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when
the context is preemtible. When PREEMPT_COUNT is disabled the context
is unknown and the reclaim bit can't be set because the caller might
hold locks which might deadlock in the allocator.
That makes debugobjects depend on PREEMPT_COUNT ||
!DEFERRED_STRUCT_PAGE_INIT, which limits the coverage slightly, but
keeps it functional for most cases"
* tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Make it work with deferred page initialization - again
- Fix speculative safety in fred_extint()
- Fix __WARN_printf() trap in early_fixup_exception()
- Fix clang-build boot bug for unusual alignments,
triggered by CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
- Replace the final few __ASSEMBLY__ stragglers that snuck
in lately into non-UAPI x86 headers and use __ASSEMBLER__
consistently (again).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=A61U
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix speculative safety in fred_extint()
- Fix __WARN_printf() trap in early_fixup_exception()
- Fix clang-build boot bug for unusual alignments, triggered by
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
- Replace the final few __ASSEMBLY__ stragglers that snuck in lately
into non-UAPI x86 headers and use __ASSEMBLER__ consistently (again)
* tag 'x86-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers: Replace __ASSEMBLY__ stragglers with __ASSEMBLER__
x86/cfi: Fix CFI rewrite for odd alignments
x86/bug: Handle __WARN_printf() trap in early_fixup_exception()
x86/fred: Correct speculative safety in fred_extint()
for the common HZ=100, 250 or 1000 cases, only inlining them
for odd HZ values like HZ=300.
The inlining overhead showed up in performance tests of the TCP code.
(Marked as an RFC pull request, as it's not a regression.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=duTI
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Improve the inlining of jiffies_to_msecs() and jiffies_to_usecs(), for
the common HZ=100, 250 or 1000 cases. Only use a function call for odd
HZ values like HZ=300 that generate more code.
The function call overhead showed up in performance tests of the TCP
code"
* tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/jiffies: Inline jiffies_to_msecs() and jiffies_to_usecs()
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected
un-inlining, which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and
want to avoid. The visible ugliness of the new reserved field
will be avoided the next time the RSEQ area is extended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmmkAl0RHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hdsg/+IdQpmtEXsugE1FqEuuptm0ld6hcFI9WC
mlEXhid5Gq3a3KMBv0CLd73o+k8Ju/BDEdbfLMzY8A9h8OxfnuUL1T6Jt4q7dF1h
76ja1R+i+GNFcXWmSG8z6FUns4bRBJeNWFs3dzCFE9N2qOCCj1xBr/9BqgKvNVfZ
cbcaiMvmi3z/vPUmT8hdMdEcA0Zo2gVcKDmny4Tca9sigyLZD8FqtW1FhqL1HX8H
Cx8fZ2lkD2z6gKtOAbC3QuWVmP88tvZldaMsGHTAQIa14PP5h2xhyuLxBF1Zjnwy
aWl4iYr6ILu3LRi54CmQOiESdEf3Srdbl8JxDcvU9vh8ecqXvDGPUB2xCszlPvOx
R+scskNgNyd1WtUF2VYFLTNkj0B7Xe6eTYfIu2d5r8GrRt0YjRzsK/JQallAkV6V
KORDm4/Xyl5Ss6tNtfZP7lpHD2qykscRGxgr0HjjJCyjA1ZNtGc1A+JKZ8D8q9Nq
rxEbaa65KfAtYJ4i5j9goFPQwNeHXm/emToVzEfyKwZHs3ns0LwffDGSFFOYSm/p
FVVmi9iSoxRvRFHBflvBIwFaCnIyBLTJZlB/Bp8MVaFnv+6OzdE/nfcKNaYqcVaT
mzCpY2DFTx5KISmJR7DAWsPntoRV6WPcxVApWicTaT5G3C2TLvvTAEq8g2WIYDFB
j6oNyEkX/Xw=
=Nxqx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected un-inlining,
which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and want to
avoid. The visible ugliness of the new reserved field will be avoided
the next time the RSEQ area is extended.
* tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: slice ext: Ensure rseq feature size differs from original rseq size
rseq: Clarify rseq registration rseq_size bound check comment
sched/core: Fix wakeup_preempt's next_class tracking
rseq: Mark rseq_arm_slice_extension_timer() __always_inline
sched/fair: Fix lag clamp
sched/eevdf: Update se->vprot in reweight_entity()
sched/fair: Only set slice protection at pick time
sched/fair: Fix zero_vruntime tracking
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs. perf_remove_from_context() race
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0JyK
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs perf_remove_from_context() race
* tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
perf/core: Fix refcount bug and potential UAF in perf_mmap
perf/x86/intel/uncore: Add per-scheduler IMC CAS count events
perf/core: Fix invalid wait context in ctx_sched_in()
