DTS example in the bindings should be indented with 2- or 4-spaces, so
correct a mixture of different styles to keep consistent 4-spaces.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Gabriel Somlo <gsomlo@gmail.com>
Link: https://patch.msgid.link/20250821083038.46274-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some rtnetlink selftests assume the presence of ifconfig and iproute2
support for the `proto` keyword in `ip address` commands. These
assumptions can cause test failures on modern systems (e.g. Debian
Bookworm) where:
- ifconfig is not installed by default
- The iproute2 version lacks support for address protocol
This patch improves test robustness by:
- Skipping kci_test_promote_secondaries if ifconfig is missing
- Skipping do_test_address_proto if ip address help does not mention
proto
These changes ensure the tests degrade gracefully by reporting SKIP
instead of FAIL when prerequisites are not met, improving portability
across systems.
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alessandro Ratti <alessandro@0x65c.net>
Link: https://patch.msgid.link/20250822140633.891360-2-alessandro@0x65c.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: dsa: lantiq_gswip: prepare for supporting new features
Prepare for supporting the newer standalone MaxLinear GSW1xx switch
family by refactoring the existing lantiq_gswip driver.
This is the first of a total of 3 series and doesn't yet introduce
any functional changes, but rather just makes the driver more
flexible, so new hardware and features can be supported in future.
This series has been preceded by an RFC series which covers everything
needed to support the MaxLinear GSW1xx family of switches. Andrew Lunn
had suggested to start with the 8 patches now submitted as they prepare
but don't yet introduce any functional changes.
Everything has been compile and runtime tested on AVM Fritz!Box 7490
(GSWIP version 2.1, VR9 v1.2)
Link: https://lore.kernel.org/aKDhFCNwjDDwRKsI@pidgin.makrotopia.org
====================
Link: https://patch.msgid.link/cover.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the switch API version in struct gswip_priv. As the hardware has
the 'major/minor' version bytes in the wrong order preventing numerical
comparisons the version to be stored in gswip_priv is constructed in
such a way that the REV field is the most significant byte and the MOD
field the least significant byte. Also provide a conveniance macro to
allow comparing the stored version of the hardware against the already
defined GSWIP_VERSION_* macros.
This is done in order to prepare supporting newer features such as 4096
VLANs and per-port configurable learning which are only available
starting from specific hardware versions.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/eddb51ae8d0b2046ca91906e93daad7be5af56d7.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While the older Lantiq / Intel which are currently supported all use
the DSA_TAG_GSWIP tagging protocol, newer MaxLinear GSW1xx modules use
another 8-byte tagging protocol. Move the tag protocol information to
struct gswip_hw_info to make it possible for new models to specify
a different tagging protocol.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/841281b62fdb472048fa98fbad6c88dfbf512825.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Load microcode as specified in struct hw_info instead of relying on
a single array of instructions. This is done in preparation to allow
loading different microcode for the MaxLinear GSW1xx family.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/486d95c085913d506745fbe4a0ab5d1ebdc3ed63.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of relying on hard-coded numbers for MII ports, introduce
a bitmap for MII ports.
This is done in order to prepare for supporting MaxLinear GSW1xx ICs
which got a different layout of ports.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/019fc8ed06f2317976eac143320d1dc046e8f392.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce header file and move register definitions as well as the
definitions struct gswip_hw_info and struct gswip_priv there.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/551c72c93131cd200b38340741e68ff21793ba0b.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MaxLinear GSW1xx series of switches support using either the
(R)(G)MII interface on port 5 or the SGMII interface on port 4 to be
used as CPU port. Prepare for supporting them by defining a mask of
allowed CPU ports instead of a single port.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/879c66672d26fe49c1f5d9aa40d8ebc0f31885ab.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two instances of struct dsa_switch_ops differ only by their
.phylink_get_caps op. Instead of having two instances of dsa_switch_ops,
rather just have a pointer to the phylink_get_caps function in
struct gswip_hw_info.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/03d72eceeb3faecdbe03ce58aab40861cf6b77c1.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kernel tries to be helpful and attach the XDP program in generic
mode if the driver has no BPF ndo at all. Since the xdp.py tests
all have "native" in their names this can be quite confusing.
Force native / "drv" attachment. Note that netdevsim re-uses
the generic handler as its "native" handler, so we'll maintain
the test coverage of the generic mode that way. No need to test
both explicitly, I reckon.
Link: https://patch.msgid.link/20250822195645.1673390-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
Aquantia PHY driver consolidation - part 1
This started out as an effort to add some new features hinging on the
VEND1_GLOBAL_CFG_* registers, but I quickly started to notice that the
Aquantia PHY driver has a large code base, but individual PHYs only
implement arbitrary subsets of it.
The table below lists the PHYs known to me to have the
VEND1_GLOBAL_CFG_* registers.
PHY Access from Access from
aqr107_read_rate() aqr113c_fill_interface_modes()
------------------------------------------------------------------
AQR107 y n
AQCS109 y n
AQR111 y n
AQR111B0 y n
AQR112 y n
AQR412 y n
AQR113 y y
AQR113C y y
AQR813 y n
AQR114C y n
AQR115C y y
Maybe you're wondering, after reading this, why don't more Aquantia PHYs
populate phydev->possible_interfaces based on the registers that they
are known to have? And why do AQR114C and AQR115C, PHYs from the same
generation, just having different max speeds, differ in this behaviour?
And why does AQR813, the 8-port variant of AQR113, not call
aqr113c_config_init(), but aqr107_config_init()?
I did wonder, and I don't know either, but I suspect it has to do with
developers not wanting to break what they can't test, and only touching
what they are interested in. Multiplied at a large enough scale, this
tends to result in unmaintainable code.
The tendency might also be encouraged by the slightly strange and
inconsistent naming scheme in this driver.
The set proposes a naming scheme based on generations, and feature
inheritance from Gen X to Gen X+1. This helps fill in missing
software functionalities where the hardware feature should be present.
I had to put a hard stop at 15 patches, so I've picked the more
meaningful functions to consolidate, rather than going through the
entire driver. Depending on review feedback, I can do more or I can
stop.
Furthermore, the set adds generation-appropriate support for two more
PHY IDs: AQR412 and AQR115, and fixes the improper reporting of AQR412C
as AQR412.
The changes were tested on AQR107, AQR112, AQR412C and AQR115.
====================
Link: https://patch.msgid.link/20250821152022.1065237-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AQR115 is similar to the already supported AQR115C, having speeds up to
2.5Gbps. In fact, the two differ only in the FCBGA package size (7x11mm
vs 7x7mm for the Compact variant). So it makes sense that the feature
set is identical for the 2 drivers.
This PHY is present on the newest PCB revision E (v4.0) of the NXP
LS1046A-RDB, having replaced the RTL8211FS SGMII PHY going to fm1-mac5.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-16-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'm not sure whether there is any similar real-life problem on AQR813
and AQR114C as were seen on the PHYs that these commit were written for:
- a7f3abcf63 ("net: phy: aquantia: only poll GLOBAL_CFG regs on
aqr113, aqr113c and aqr115c")
- bed90b06b6 ("net: phy: aquantia: clear PMD Global Transmit Disable
bit during init")
but the inconsistency in handling between PHYs of the same generation is
striking. Apart from different firmware builds with different
provisioning, the only difference between these PHYs should be the max
link speed and/or the number of ports.
Let's try and see if there's any problem if all PHYs from the same
generation use the same config_init() method.
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Robert Marko <robimarko@gmail.com>
Cc: Paweł Owoc <frut3k7@gmail.com>
Cc: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-15-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aqr113c_config_init() is called by AQR113, AQR113C, AQR115C, all Gen4
PHYs. Thus, rename this to aqr_gen4_config_init().
Currently, aqr113c_config_init() calls aqr_gen2_config_init(). Since
we've established that these are Gen4 PHYs, it makes sense to inherit
the Gen3 feature set as well. Currently, aqr_gen3_config_init() just
calls aqr_gen2_config_init(), so we can safely make this extra
modification and expect no functional change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-14-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I lack documentation for AQCS109, but from commit 99c864667c ("net:
phy: aquantia: add support for AQCS109"), it is known that "From
software point of view, it should be almost equivalent to AQR107."
Based on further conjecture of the device numbering scheme, I am
treating it as similar to AQR109 (a Gen2 PHY capable of to 2.5G).
Its current instructions are also present in other init sequences as
below:
- aqr_wait_reset_complete() ... aqr107_chip_info() as well as
aqr107_set_downshift() are in aqr_gen1_config_init()
- aqr_gen2_fill_interface_modes() is in aqr_gen2_config_init()
So it would be good to centralize this implementation by just calling
aqr_gen2_config_init().
In practice this completes support for the following features, which are
present on AQR109 already:
- Potentially reverse MDI lane order via "marvell,mdi-cfg-order"
- Restore polarity of active-high and active-low LEDs after reset.
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-13-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The AQrate Gen3 PHYs are AQR111(C), AQR112(C), and their multi-port
variants, like AQR411(C), AQR412(C).
Currently, AQR112, AQR412 and AQR412C are Gen3 PHYs supported by the
driver which have no config_init() implementation. I have hardware and
documentation that confirms they are compatible with the operations done
in aqr_gen2_config_init(), a Gen2-level function.
This is needed as a preparation for reading cached registers in
aqr_gen2_read_status(), which is a function that these PHYs already call.
The initial reading is done from:
aqr_gen2_config_init()
-> aqr_gen2_fill_interface_modes()
-> aqr_gen2_read_global_syscfg()
thus the need for them to also call aqr_gen2_config_init(), in order for
the cached register values to be available.
In expectation of Gen3-specific features, introduce aqr_gen3_config_init()
which calls aqr_gen2_config_init(). Also modify the AQR111 silicon
variants to call their generation-appropriate init function. No
functional change for these, hence the minor mention.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I don't have documentation or hardware to test, but according to commit
99c864667c ("net: phy: aquantia: add support for AQCS109"), "From
software point of view, it should be almost equivalent to AQR107."
I am relatively confident that the GLOBAL_CFG registers read by
aqr_gen2_fill_interface_modes() are supported, because
aqr_gen2_read_status(), currently used by AQCS109, also reads them, and
I'm unaware of any reported problem.
The change is necessary because a future patch will introduce a
requirement for all aqr_gen2_read_status() callers to have previously
called aqr_gen2_read_global_syscfg(). This is done through
aqr_gen2_fill_interface_modes().
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aqr105_read_status() and aqr107_read_status() are very similar.
In fact, they are identical, save from a code snippet accessing a Gen2
feature (rate adaptation), placed at the end of aqr107_read_rate(), and
absent from aqr105_read_rate().
The code structure is:
aqr105_read_status() aqr107_read_status()
-> aqr105_read_rate() -> aqr107_read_rate()
After the recent change "net: phy: aquantia: use cached GLOBAL_CFG
registers in aqr107_read_rate()", it is absolutely trivial to
restructure the code as follows:
aqr_gen2_read_status()
-> aqr_gen1_read_status()
-> Gen2-specific stuff (read GLOBAL_CFG registers to set rate_matching)
Doing so reduces code duplication.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aqr107_read_rate() - called from aqr107_read_status() even periodically
if there is no PHY IRQ - currently reads GLOBAL_CFG registers to
determine what kind of rate adaptation is in use for the current
phydev->speed. However, GLOBAL_CFG registers are runtime invariants, so
accessing the slow MDIO bus is unnecessary.
Reimplement aqr107_read_rate() by reading from the
priv->global_cfg[i].rade_adapt variables (where i is the entry
corresponding to the current phydev->speed).
Making this change also helps disentangle the code delta between
aqr105_read_rate() and aqr107_read_rate(). They are now identical up to
the code snippet which iterates over priv->global_cfg[]. This will help
eliminate the duplicate code in the upcoming patch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 7642cc28fd ("net: phylink: fix PHY validation with rate
adaption"), the API contract changed and PHY drivers are no longer
required to respond to the .get_rate_matching() method for
PHY_INTERFACE_MODE_NA. This was later followed up by documentation
commit 6d4cfcf979 ("net: phy: Update documentation for
get_rate_matching").
As such, handling PHY_INTERFACE_MODE_NA in the Aquantia PHY driver
implementation of this method is unnecessary and confusing. Remove it.
Cc: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250821152022.1065237-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, aqr_gen2_fill_interface_modes() reads VEND1_GLOBAL_CFG_*
registers to populate phydev->supported_interfaces. But this is not
the only place which needs to read these registers. There is also
aqr107_read_rate().
Based on the premise that these values are statically set by firmware
and the driver only needs to read them, the proposal is to read them
only once, at config_init() time, and use the cached values also in
aqr107_read_rate().
This patch only refactors the aqr_gen2_fill_interface_modes() code to
save the registers to driver memory, and to populate supported_interfaces
based on that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since aqr_gen2_config_init() and aqr_gen2_fill_interface_modes() refer to
the feature set common to the same generation, it means all callers of
aqr_gen2_config_init() also support the Global System Configuration
registers at addresses 1E.31B -> 1E.31F, and these should be read by the
driver to figure out the list of supported interfaces for phylink.
This affects the following PHYs supported by this driver:
- Gen2: AQR107
- Gen3: AQR111, AQR111B0
- Gen4: AQR114C, AQR813.
AQR113C, a Gen4 PHY, has unmodified logic after this change, because
currently, the aqr_gen2_fill_interface_modes() call is chained after
aqr_gen2_config_init(), and after this patch, it is tail-called from the
latter function, leading to the same code flow.
At the same time, move aqr_gen2_fill_interface_modes() upwards of its
new caller, aqr_gen2_config_init(), to avoid a forward declaration.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Establish a more intuitive function naming convention in this driver.
A GenX PHY must only call aqr_genY_ functions, where Y <= X.
Loosely speaking, aqr107_ is representative of Gen2 and above, except for:
- aqr107_config_init()
- aqr107_suspend()
- aqr107_resume()
- aqr107_wait_processor_intensive_op()
which are also called by AQR105, so these are renamed to Gen1.
Actually aqr107_config_init() is renamed to aqr_gen1_config_init() when
called by AQR105, and aqr_gen2_config_init() when called by all other
PHYs. The Gen2 function calls the Gen1 function, so there is no
functional change. This prefaces further Gen2-specific initialization
steps which must be omitted for AQR105. These will be added to
aqr_gen2_config_init().
In fact, many PHY drivers call an aqr*_config_init() beneath their
generation's feature set: AQR114C is a Gen4 PHY which calls
aqr_gen2_config_init(), even though AQR113C, also a Gen4 PHY which
differs only in maximum link speed, calls the richer
aqr113c_config_init() which also sets phydev->possible_interfaces.
Many of the more subtle inconsistencies of this kind will be fixed up in
later changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduced in commit bed90b06b6 ("net: phy: aquantia: clear PMD Global
Transmit Disable bit during init"), the clearing of MDIO_PMA_TXDIS plus
the call to aqr107_wait_processor_intensive_op() are only by chance
placed between aqr107_config_init() and aqr107_fill_interface_modes().
In other words, aqr107_fill_interface_modes() does not depend in any way
on these 2 operations.
I am only 90% sure of that, and I intend to move aqr107_fill_interface_modes()
to be a part of aqr107_config_init() in the future. So to isolate the
issue for blame attribution purposes, make these 2 functions adjacent to
each other again.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250821152022.1065237-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'm unsure whether intentionate or not, but I think the (partially
observed) naming convention in this driver is that function prefixes
denote the earliest generation when a feature is available. In case of
aqr107_fill_interface_modes(), that means that the GLOBAL_CFG registers
are a Gen2 feature. Supporting evidence: the AQR105, a Gen1 PHY, does
not have these registers, thus the function is not named aqr105_*.
Based on this inferred naming scheme, I am proposing a refinement of
commit a7f3abcf63 ("net: phy: aquantia: only poll GLOBAL_CFG regs on
aqr113, aqr113c and aqr115c") which introduced aqr113c_fill_interface_modes(),
suggesting this may be a Gen4 PHY feature.
The long-term goal is for aqr107_config_init() to tail-call
aqr107_fill_interface_modes(), such that the latter function is also
called by AQR107 itself, and many other PHY drivers. Currently it can't,
because aqr113c_config_init() calls aqr107_config_init() and then
aqr113c_fill_interface_modes(). So this would lead to a duplicate call
to aqr107_fill_interface_modes() for AQR113C.
Centralize the reading of GLOBAL_CFG registers in the AQR107 method, and
create a boolean, set to true by AQR113C, which tests whether waiting
for a non-zero value in the GLOBAL_CFG_100M register is necessary.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250821152022.1065237-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I have noticed from schematics and firmware images that the PHY for
which I've previously added support in commit 973fbe68df ("net: phy:
aquantia: add AQR112 and AQR412 PHY IDs") is actually an AQR412C, not
AQR412.
These are actually PHYs from the same generation, and Marvell documents
them as differing only in the size of the FCCSP package: 19x19 mm for
the AQR412, vs 14x12mm for the Compact AQR412C.
I don't think there is any point in backporting this to stable kernels,
since the PHYs are identical in capabilities, and no functional
difference is expected regardless of how the PHY is identified.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250821152022.1065237-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiawen Wu says:
====================
net: wangxun: complete ethtool coalesce options
Support to use adaptive RX coalescing. Change the default RX coalesce
usecs and limit the range of parameters for various types of devices,
according to their hardware design.
====================
Link: https://patch.msgid.link/20250821023408.53472-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support to turn on/off adaptive RX/TX coalesce. When adaptive coalesce
is on, use DIM algorithm for a dynamic interrupt moderation.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250821023408.53472-5-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cleanup the code for the next patch to add adaptive RX coalesce.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250821023408.53472-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add limitation on tx_max_coalesced_frames_irq as 0 ~ 65535, because
'wx->tx_work_limit' is declared as a member of type u16.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250821023408.53472-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the default RX/TX ITR for wx_mac_em devices from 20K to 7K, which
is an experience value from out-of-tree ngbe driver, to get higher
performance on some platforms with weak single-core performance.
TCP_SRTEAM test on Phytium 2000+ shows that the throughput of 64-Byte
packets is increased from 350.53Mbits/s to 395.92Mbits/s.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250821023408.53472-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fan Gong says:
====================
net: hinic3: Add a driver for Huawei 3rd gen NIC - management interfaces
This is the 2/3 patch of the patch-set described below.
The patch-set contains driver for Huawei's 3rd generation HiNIC
Ethernet device that will be available in the future.
This is an SRIOV device, designed for data centers.
Initially, the driver only supports VFs.
Following the discussion over RFC01, the code will be submitted in
separate smaller patches where until the last patch the driver is
non-functional. The RFC02 submission contains overall view of the entire
driver but every patch will be posted as a standalone submission.
====================
Link: https://patch.msgid.link/cover.1755673097.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Command Queue framework initialization.
It is used to set the related table items of the driver and obtain the
HW configuration.
Co-developed-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Xin Guo <guoxin09@huawei.com>
Co-developed-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Link: https://patch.msgid.link/1aeed56de39078bde8fff4597d7aa22d350058fc.1755673097.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Per the RDS 3.1 spec [1], RDS extension headers EXTHDR_NPATHS and
EXTHDR_GEN_NUM are be16 and be32 values respectively, exchanged during
normal operations over-the-wire (RDS Ping/Pong). This contrasts their
declarations as host endian unsigned ints.
Fix the annotations across occurrences. Flagged by Sparse.
[1] https://oss.oracle.com/projects/rds/dist/documentation/rds-3.1-spec.html
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250820175550.498-5-ujwal.kundur@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
jhash_1word accepts host endian inputs while rs_bound_port is a be16
value (sockaddr_in6.sin6_port). Use ntohs() for consistency.
Flagged by Sparse.
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250820175550.498-4-ujwal.kundur@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__ipv6_addr_jhash (wrapper around jhash2()) and __inet_ehashfn (wrapper
around jhash_3words()) work with u32 (host endian) values but accept big
endian inputs. Declare the local variables as big endian to avoid
unnecessary casts.
Flagged by Sparse.
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250820175550.498-3-ujwal.kundur@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both constants are 1<<3, but EPOLLERR uses the correct annotations.
Flagged by Sparse.
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250820175550.498-2-ujwal.kundur@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: user_mss and TCP_MAXSEG series
Annotate data-races around tp->rx_opt.user_mss and make
TCP_MAXSEG lockless.
====================
Link: https://patch.msgid.link/20250821141901.18839-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
setsockopt(TCP_MAXSEG) writes over a field that does not need
socket lock protection anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250821141901.18839-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This field is already read locklessly for listeners,
next patch will make setsockopt(TCP_MAXSEG) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250821141901.18839-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idpf has a limit on number of scatter-gather frags
that can be used per segment.
Currently, idpf_tx_start() checks if the limit is hit
and forces a linearization of the whole packet.
This requires high order allocations that can fail
under memory pressure. A full size BIG-TCP packet
would require order-7 alocation on x86_64 :/
We can move the check earlier from idpf_features_check()
for TSO packets, to force GSO in this case, removing the
cost of a big copy.
This means that a linearization will eventually happen
with sizes smaller than one MSS.
__idpf_chk_linearize() is renamed to idpf_chk_tso_segment()
and moved to idpf_lib.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Reviewed-by: Joshua Hay <joshua.a.hay@intel.com>
Tested-by: Brian Vazquez <brianvv@google.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250818195934.757936-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
