npc_cn20k_dft_rules_idx_get() wrote USHRT_MAX into individual outputs only
on some error paths (lbk promisc lookup, VF ucast lookup, and the PF rule
walk), which could leave other caller slots stale across retries.
Set every non-NULL bcast/mcast/promisc/ucast pointer to USHRT_MAX once at
entry, then drop the duplicate assignments on failure. Successful lookups
still overwrite the relevant slot before returning.
Fixes: 09d3b7a140 ("octeontx2-af: npc: cn20k: Allocate default MCAM indexes")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-9-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_cn20k_read_mcam_entry() always reloaded action and vtag_action from
bank 0 after programming the CAM words. Use the bank returned by
npc_get_bank() for the ACTION reads as well, and read those registers once
up front so both X2 and X4 paths share the same metadata.
Return directly from the X2 keyword path now that the action fields are
already populated.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-8-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For X4 keys its loop reused the bank parameter as the loop counter, so bank
no longer reflected the caller's bank after the loop and the control flow
was hard to follow.
Program NPC_AF_CN20K_MCAMEX_BANKX_CFG_EXT directly in
npc_cn20k_config_mcam_entry(): one CFG write for X2 using the computed
bank, and one CFG write per bank inside the X4 action loop. Enable the
entry at the end with npc_cn20k_enable_mcam_entry(..., true) instead of
embedding the enable bit in bank_cfg via the removed helper.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 4e527f1e5c ("octeontx2-af: npc: cn20k: Add new mailboxes for CN20K silicon")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-7-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the old four-argument CN20K MCAM clear with a per-bank static
helper and npc_cn20k_clear_mcam_entry() that takes a logical MCAM index,
resolves the key width via npc_mcam_idx_2_key_type(), and clears either one
bank (X2) or every bank (X4).
Call it from npc_clear_mcam_entry() on cn20k and log when key-type lookup
fails. Use the per-bank helper from npc_cn20k_config_mcam_entry() for
pre-program clears.
For loopback VFs, use the promisc MCAM index as ucast_idx when copying RSS
action for promisc, matching cn20k default-rule layout.
Cc: Suman Ghosh <sumang@marvell.com>
Fixes: 6d1e70282f ("octeontx2-af: npc: cn20k: Use common APIs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-6-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_defrag_move_vdx_to_free() disables, copies, and enables the MCAM entry
at a new index but previously left entry2target_pffunc[] and the mcam_rules
list still keyed to the old index. Copy the target PF association to the
new slot, clear the old one, and retarget the rule entry so software state
matches the relocated hardware context.
Fixes: 645c6e3c19 ("octeontx2-af: npc: cn20k: virtual index support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-5-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_defrag_alloc_free_slots() allocates MCAM indexes in up to two passes on
bank0 then bank1. On failure it rolls back by freeing entries already
placed in save[].
__npc_subbank_alloc() can return a negative errno while only part of the
indexes are valid. The rollback loop used rc for
npc_mcam_idx_2_subbank_idx() as well, so a successful lookup stored zero in
rc and a later __npc_subbank_free() failure could still end with return 0
when the allocation path had also left rc at zero (for example shortfall
after zero return values from the alloc helpers).
Jump to the rollback path immediately when either __npc_subbank_alloc()
call fails, preserving its errno. If both calls succeed but the total
allocated count is still less than cnt, set rc to -ENOSPC before rollback.
Use a separate err variable for npc_mcam_idx_2_subbank_idx() so a
successful lookup no longer clears a non-zero rc from the allocation phase.
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 645c6e3c19 ("octeontx2-af: npc: cn20k: virtual index support")
Link: https://lore.kernel.org/netdev/adjNJEpILRZATB2N@stanley.mountain/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-4-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
debugfs is not intended to be checked for allocation failures the way other
kernel APIs are: callers should not fail probe or subsystem init because a
debugfs node could not be created, including when debugfs is disabled in
Kconfig. Replacing NULL checks with IS_ERR() checks is similarly wrong for
optional debugfs.
Remove dentry checks and -EFAULT returns from npc_cn20k_debugfs_init().
See:
https://staticthinking.wordpress.com/2023/07/24/
debugfs-functions-are-not-supposed-to-be-checked/
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 528530dff5 ("octeontx2-af: npc: cn20k: add debugfs support")
Link: https://lore.kernel.org/netdev/adjNGPWKMOk3KgWL@stanley.mountain/
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-3-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
npc_mcam_idx_2_key_type() can fail; callers used to ignore it and still
used kw_type when enabling, configuring, copying, and reading MCAM entries.
That could program or decode hardware with an undefined key type.
Return -EINVAL when key-type lookup fails. Return -EINVAL from
npc_cn20k_copy_mcam_entry() when src and dest key types differ instead of
failing silently.
Change npc_cn20k_{enable,config,copy,read}_mcam_entry() to return int on
success or error. Thread those errors through the cn20k MCAM write and read
mbox handlers, the cn20k baseline steer read path, NPC defrag move
(disable/copy/enable with dev_err and -EFAULT), and the DMAC update path in
rvu_npc_fs.c.
Make npc_copy_mcam_entry() return int so the cn20k branch can return
npc_cn20k_copy_mcam_entry() without a void/int mismatch, and fail
NPC_MCAM_SHIFT_ENTRY when copy fails.
Cc: Suman Ghosh <sumang@marvell.com>
Cc: Dan Carpenter <error27@gmail.com>
Fixes: 6d1e70282f ("octeontx2-af: npc: cn20k: Use common APIs")
Link: https://lore.kernel.org/netdev/adiQJvuKlEhq2ILx@stanley.mountain/
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260429022722.1110289-2-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to respect the original descriptor order and avoid any
potential IOMMU fault or memory corruption, move pending queue entries
to the head of hw queue tx_list if the DMA mapping of current inflight
packet fails in airoha_dev_xmit routine.
Fixes: 3f47e67dff ("net: airoha: Add the capability to consume out-of-order DMA tx descriptors")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260429-airoha-xmit-unmap-error-path-v2-1-32e43b7c6d25@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, request_threaded_irq() is used with a primary handler but a
NULL threaded handler, while also setting the IRQF_ONESHOT flag. This
specific combination triggers a WARNING since the commit aef30c8d56
("genirq: Warn about using IRQF_ONESHOT without a threaded handler").
WARNING: kernel/irq/manage.c:1502 at __setup_irq+0x4fa/0x760
Fix the issue by switching to request_irq(), which is the appropriate
interface or a non-threaded interrupt handler, and removing the
unnecessary IRQF_ONESHOT flag.
Fixes: eb4898fde1 ("net: libwx: add wangxun vf common api")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/786DDC7D5CCA6D0A+20260429083743.88961-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Register WX_CFG_PORT_ST is a PF restricted register. When a VF is
initialized, attempting to read this register triggers an illegal
register access, which lead to a system hang.
When the device is VF, the bus function ID can be obtained directly from
the PCI_FUNC(pdev->devfn).
Fixes: a04ea57aae ("net: libwx: fix device bus LAN ID")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/4D1F4452D21DE107+20260429083743.88961-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current VSI mailbox implementation, the VSI allocates a DMA buffer
to store the message sent to the PSI. When the PSI receives the message
request from the VSI, the hardware copies the message data from this DMA
buffer to PSI's DMA buffer for processing.
When enetc_msg_vsi_send() times out, two scenarios can occur:
1) Use-after-free: If the hardware hasn't completed message copying when
the VSI frees the buffer, the hardware may subsequently copy the data
from freed memory to PSI's DMA buffer.
2) Message race: If PSI hasn't processed the previous message when the
next message is sent, the VSI may receive the previous message's
reply, leading to incorrect handling.
To address these issues, implement the following changes:
- Check the mailbox busy status before sending a new message. If the
mailbox is in busy state, it indicates the previous message is still
being processed, so return an error immediately.
- Add the 'msg' field to struct enetc_si to preserve the DMA buffer
information. The caller of enetc_msg_vsi_send() no longer frees the
DMA buffer. Instead, defer freeing until it is safe to do so (when
mailbox is not busy on next send).
- Add cleanup in enetc_vf_remove() to free the last message buffer.
This ensures the DMA buffer remains valid during message copying and
prevents message reply mismatches.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260429081930.3259824-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_{skip_exthdr,find_hdr}() and ip6_{tnl_parse_tlv_enc_lim,
protocol_deliver_rcu}() iterate over IPv6 extension headers until they
find a non-extension-header protocol or run out of packet data. The
loops have no iteration counter, relying solely on the packet length
to bound them. For a crafted packet with 8-byte extension headers
filling a 64KB jumbogram, this means a worst case of up to ~8k
iterations with a skb_header_pointer call each. ipv6_skip_exthdr(),
for example, is used where it parses the inner quoted packet inside
an incoming ICMPv6 error:
- icmpv6_rcv
- checksum validation
- case ICMPV6_DEST_UNREACH
- icmpv6_notify
- pskb_may_pull() <- pull inner IPv6 header
- ipv6_skip_exthdr() <- iterates here
- pskb_may_pull()
- ipprot->err_handler() <- sk lookup
The per-iteration cost of ipv6_skip_exthdr itself is generally
light, but skb_header_pointer becomes more costly on reassembled
packets: the first ~1232 bytes of the inner packet are in the skb's
linear area, but the remaining ~63KB are in the frag_list where
skb_copy_bits is needed to read data.
Initially, the idea was to add a configurable limit via a new
sysctl knob with default 8, in line with knobs from commit
47d3d7ac65 ("ipv6: Implement limits on Hop-by-Hop and Destination
options"), but two reasons eventually argued against it:
- It adds to UAPI that needs to be maintained forever, and
upcoming work is restricting extension header ordering anyway,
leaving little reason for another sysctl knob
- exthdrs_core.c is always built-in even when CONFIG_IPV6=n,
where struct net has no .ipv6 member, so the read site would
need an ifdef'd fallback to a constant anyway
Therefore, just use a constant (IP6_MAX_EXT_HDRS_CNT). All four
extension header walking functions are now bound by this limit.
Note that the check in ip6_protocol_deliver_rcu() happens right
before the goto resubmit, such that we don't have to have a test
for ipv6_ext_hdr() in the fast-path.
There's an ongoing IETF draft-iurman-6man-eh-occurrences to enforce
IPv6 extension headers ordering and occurrence. The latter also
discusses security implications. As per RFC8200 section 4.1, the
occurrence rules for extension headers provide a practical upper
bound which is 8. In order to be conservative, let's define
IP6_MAX_EXT_HDRS_CNT as 12 to leave enough room for quirky setups.
In the unlikely event that this is still not enough, then we might
need to reconsider a sysctl.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260429154648.809751-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LAN8814 QSGMII soft reset was moved into the probe function to avoid
triggering it for each of 4 PHY-s in the package.
However, that broke QSGMII link between the MAC and PHY on most LAN8814
PHY-s, specificaly for us on the Microchip LAN969x switch.
Reading the QSGMII status registers it was visible that lanes were only
partially synced.
It looks like the reset timing is crucial, so lets move the reset back
into the .config_init function but guard it with phy_package_init_once()
to avoid it being triggered on each of 4 PHY-s in the package.
Change the probe function to use phy_package_probe_once() for coma and PtP
setup.
Fixes: 96a9178a29 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://patch.msgid.link/20260428134138.1741253-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeremy Kerr says:
====================
net: mctp: test: minor kunit test fixes
This series provides two fixes in the MCTP kunit tests - one exposed by
ktr, and one found while debugging the former on different VM configs.
====================
Link: https://patch.msgid.link/20260429-dev-mctp-test-fixes-v1-0-1127b7425809@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In our test cases, we typically feed a packet sequence into the routing
code, then inspect the device's TXed skbs to assert specific behaviours.
Using dev_queue_xmit() for our TX path introduces a fair bit of
complexity between the test packet sequence and the test device's
ndo_start_xmit callback; which may mean that the skbs have not hit the
device at the point we're inspecting the TXed skb list.
Use dev_direct_xmit instead, as we want a direct a path as possible
here, and the test dev does not need any queueing, scheduling or flow
control.
Fixes: 6ab578739a ("net: mctp: test: move TX packetqueue from dst to dev")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202604281320.525eee17-lkp@intel.com
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429-dev-mctp-test-fixes-v1-2-1127b7425809@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Invalid sockaddr padding will cause bind() to fail; ensure we have a
zeroed address in the testcase.
Fixes: 0d8647bc74 ("net: mctp: don't require a route for null-EID ingress")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260429-dev-mctp-test-fixes-v1-1-1127b7425809@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a reference leak on device_register() failure in pata_parport
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCafNROAAKCRDJZDGjmcZN
cnFfAQD+x6vRvu0bpGab9J7gvZYYtbbsj12pCbVA9jPpS2AMXQEA/ity23nuogu4
vF+H+XKqSjfdRGhn5GZ9GMhIq4tNOQ4=
=0MCi
-----END PGP SIGNATURE-----
Merge tag 'ata-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix a reference leak on device_register() failure in pata_parport
* tag 'ata-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_parport: switch to dynamic root device
A bunch of small fixes. One minor fix is found in the core side for
data race in PCM OSS layer, while remaining changes are various
device-specific fixes and quirks.
- Core: PCM OSS data race fix
- HD-audio: Fixes for TAS2781, CS35L56, and Realtek/Conexant quirks;
avoidance of a WARN_ON for HDMI channel mapping
- USB-audio: Improvements in UAC3 parsing robustness (leaks, size
checks) and fixes for potential endless loops
- ASoC: Driver-specific fixes for CS35L56, Intel bytcr_wm5102,
Spacemit, AW88395, and others, plus a new quirk for Steam Deck OLED.
- Misc: A UAF fix in aloop driver, division by zero fix in ua101
driver and leak fixes in caiaq driver
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmny+BAOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+jHhAAvkuJnlkLKVJ2t+rckKiZDWSsiB+DW6uV//EV
TRSGtkXA3WMhJcvJNKZF7YfVaNJcoAVYFZjZKXDuep8B28/HPzSaK1jY3CjAObHT
Al3OAHESsn9Qzzd+C8SBMJ+7ievDCiHCrliggjwICIE2yb2EN6Q6jz8q2nLOz4cL
8MvF8YgF8LRU+jtrz5MfMW81Auvkg4Pgnby71JVpc2PV1xv2bn5HGoWebAJWRi0f
+XIsz6NVPKlyrtXeTgY4os13277jtNg5BqDkQtgFKduHFaCLNHnn7+R6fK2h+oPq
NhdY6ujr7n5+1HS3jexB9ULRPBImW3WkkRoRjvAPizsWBfL/7+Oou6m1OlTKEk/+
RaIOEvnuVbyHnldPyPDrsxNXW3fqVFbwKree2smDFeZUptTxQiVNoILV3IRKO4uF
cFc4ax2eq+TRfD9pGng6fkp7/kz4WQE8/YHJuLpKZdj3lgp/v7OwWx0mxMvaG1Qg
689TQhhoxjcr21l6D7ESSWephP4UC7VSY5B0CqBHSo3EbLf6AbMMDr0ec1h2aL8U
ycmeR7hQw78XpL9+7jaSilRkev2SQ9wOtWLV10JFUhrD4laoJ1xIIMTWMOONCVT4
l/jMKh6rjVGE+mpVWlD1n/Scqdw7L6MLQ/x4oJ/yvDnqq5aemD9KFFQJ/HyGsp18
B3fuZkw=
=SGI0
-----END PGP SIGNATURE-----
Merge tag 'sound-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. One minor fix is found in the core side for
data race in PCM OSS layer, while remaining changes are various
device-specific fixes and quirks.
- Core: PCM OSS data race fix
- HD-audio: Fixes for TAS2781, CS35L56, and Realtek/Conexant quirks;
avoidance of a WARN_ON for HDMI channel mapping
- USB-audio: Improvements in UAC3 parsing robustness (leaks, size
checks) and fixes for potential endless loops
- ASoC: Driver-specific fixes for CS35L56, Intel bytcr_wm5102,
Spacemit, AW88395, and others, plus a new quirk for Steam Deck
OLED
- Misc: A UAF fix in aloop driver, division by zero fix in ua101
driver and leak fixes in caiaq driver"
* tag 'sound-7.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
ALSA: hda/tas2781: Fix incorrect bit update for non-book-zero or book 0 pages >1
ALSA: hda: cs35l56: Fix uninitialized value in cs35l56_hda_read_acpi()
ALSA: hda/conexant: Fix missing error check for jack detection
ALSA: hda: Avoid WARN_ON() for HDMI chmap slot checks
ALSA: usb-audio: Fix quirk entry placement for PreSonus AudioBox USB
ASoC: spacemit: adjust FIFO trigger threshold to half FIFO size
ASoC: spacemit: move hw constraints from hw_params to startup
ASoC: codecs: ab8500: Fix casting of private data
ASoC: cs35l56: Fix illegal writes to OTP_MEM registers
ASoC: Intel: bytcr_wm5102: Fix MCLK leak on platform_clock_control error
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
ALSA: usb-audio: Fix potential leak of pd at parsing UAC3 streams
ALSA: caiaq: Don't abort when no input device is available
ALSA: caiaq: Fix potentially leftover ep1_in_urb at error path
ASoC: aw88395: Fix kernel panic caused by invalid GPIO error pointer
ALSA: caiaq: fix usb_dev refcount leak on probe failure
sound: ua101: fix division by zero at probe
ALSA: usb-audio: apply quirk for Playstation PDP Riffmaster
ALSA: hda: Remove duplicate cmedia entries in codecs Makefile
ALSA: hda/realtek: Add micmute LED quirk for Acer Aspire A315-44P
...
Return -EIO if efx_mcdi_rpc() doesn't return enough space.
Fixes: 14743ddd24 ("sfc: add devlink info support for ef100")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/afGpsbLRHL4_H0KS@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When tls_set_device_offload_rx() fails at tls_dev_add(), the error path
calls tls_sw_free_resources_rx() to clean up the SW context that was
initialized by tls_set_sw_offload(). This function calls
tls_sw_release_resources_rx() (which stops the strparser via
tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),
but never frees the anchor skb that was allocated by alloc_skb(0) in
tls_strp_init().
Note that tls_sw_free_resources_rx() is exclusively used for this
"failed to start offload" code path, there's no other caller.
The leak did not exist before commit 84c61fe1a7 ("tls: rx: do not use
the standard strparser"), because the standard strparser doesn't try
to pre-allocate an skb.
The normal close path in tls_sk_proto_close() handles cleanup by calling
tls_sw_strparser_done() (which calls tls_strp_done()) after dropping
the socket lock, because tls_strp_done() does cancel_work_sync() and
the strparser work handler takes the socket lock.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260428231559.1358502-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jacob Keller says:
====================
Intel Wired LAN Update 2026-04-27 (ice, iavf)
Petr Oros from RedHat has accumulated a number of fixes for the Intel ice
and iavf drivers, bundled together in this series.
First, a series of 4 fixes to resolve issues with the iavf driver logic for
handling VLAN filters. This includes keeping VLAN filters while the
interface is brought down, waiting for confirmation on filter deletion
before deleting filters from the driver tracking structures, and handling
the VIRTCHNL_OP_ADD_VLAN for the old v1 VLAN_ADD command.
A fix for a crash in ice_reset_all_vfs(), properly checking for errors when
ice_vf_rebuild_vsi() fails.
A fix for a possible infinite recursion in ice_cfg_tx_topo() that occurs
when trying to apply invalid Tx topology configuration.
A fix to initialize the SMA pins in the DPLL subsystem properly.
A fix to change the SMA and U.FL pin state for paired pins, ensuring that
all flows changing one pin will also update its shared pin appropriately.
A preparatory patch to export __dpll_pin_change_ntf() so that drivers can
notify pin changes while already holding the dpll_lock.
A fix to ensure DPLL notifications are sent for the software-controlled
pins which wrap the physical CGU input/output pins.
A fix to add DPLL notifications for peer pins when changing the SMA or U.FL
pins, ensuring DPLL subsystem is notified about the paired connected pins.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-0-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMA and U.FL pins share physical signal paths in pairs (SMA1/U.FL1 and
SMA2/U.FL2). When one pin's state changes via a PCA9575 GPIO write,
the paired pin's state also changes, but no notification is sent for
the peer pin. Userspace consumers monitoring the peer via dpll netlink
subscribe never learn about the update.
Add ice_dpll_sw_pin_notify_peer() which sends a change notification for
the paired SW pin. Call it from ice_dpll_pin_sma_direction_set(),
ice_dpll_sma_pin_state_set(), and ice_dpll_ufl_pin_state_set() after
pf->dplls.lock is released. Use __dpll_pin_change_ntf() because
dpll_lock is still held by the dpll netlink layer (dpll_pin_pre_doit).
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-11-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The SMA/U.FL pin redesign (commit 2dd5d03c77 ("ice: redesign dpll
sma/u.fl pins control")) introduced software-controlled pins that wrap
backing CGU input/output pins, but never updated the notification and
data paths to propagate pin events to these SW wrappers.
The periodic work sends dpll_pin_change_ntf() only for direct CGU input
pins. SW pins that wrap these inputs never receive change or phase
offset notifications, so userspace consumers such as synce4l monitoring
SMA pins via dpll netlink never learn about state transitions or phase
offset updates. Similarly, ice_dpll_phase_offset_get() reads the SW
pin's own phase_offset field which is never updated; the PPS monitor
writes to the backing CGU input's field instead.
Fix by introducing ice_dpll_pin_ntf(), a wrapper around
dpll_pin_change_ntf() that also notifies any registered SMA/U.FL pin
whose backing CGU input matches. Replace all direct
dpll_pin_change_ntf() calls in the periodic notification paths with
this wrapper. Fix ice_dpll_phase_offset_get() to return the backing
CGU input's phase_offset for input-direction SW pins.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-10-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export __dpll_pin_change_ntf() so that drivers can send pin change
notifications from within pin callbacks, which are already called
under dpll_lock. Using dpll_pin_change_ntf() in that context would
deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-9-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMA and U.FL pins share physical signal paths in pairs (SMA1/U.FL1 and
SMA2/U.FL2) controlled by the PCA9575 GPIO expander. Each pair can
only have one active pin at a time: SMA1 output and U.FL1 output share
the same CGU output, SMA2 input and U.FL2 input share the same CGU
input. The PCA9575 register bits determine which connector in each
pair owns the signal path.
The driver does not account for this pairing in two places:
ice_dpll_ufl_pin_state_set() modifies PCA9575 bits and disables the
backing CGU pin without checking whether the U.FL pin is currently
active. Disconnecting an already inactive U.FL pin flips bits that
the paired SMA pin relies on, breaking its connection.
ice_dpll_sma_direction_set() does not propagate direction changes to
the paired U.FL pin. For SMA2/U.FL2 the ICE_SMA2_UFL2_RX_DIS bit is
never managed, so U.FL2 stays disconnected after SMA2 switches to
output. For both pairs the backing CGU pin of the U.FL side is never
enabled when a direction change activates it, so userspace sees the
pin as disconnected even though the routing is correct.
Fix by guarding the U.FL disconnect path against inactive pins and by
updating the paired U.FL pin fully on SMA direction changes: manage
ICE_SMA2_UFL2_RX_DIS for the SMA2/U.FL2 pair and enable the backing
CGU pin whenever the peer becomes active.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-8-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The DPLL SMA/U.FL pin redesign introduced ice_dpll_sw_pin_frequency_get()
which gates frequency reporting on the pin's active flag. This flag is
determined by ice_dpll_sw_pins_update() from the PCA9575 GPIO expander
state. Before the redesign, SMA pins were exposed as direct HW
input/output pins and ice_dpll_frequency_get() returned the CGU
frequency unconditionally — the PCA9575 state was never consulted.
The PCA9575 powers on with all outputs high, setting ICE_SMA1_DIR_EN,
ICE_SMA1_TX_EN, ICE_SMA2_DIR_EN and ICE_SMA2_TX_EN. Nothing in the
driver writes the register during initialization, so
ice_dpll_sw_pins_update() sees all pins as inactive and
ice_dpll_sw_pin_frequency_get() permanently returns 0 Hz for every
SW pin.
Fix this by writing a default SMA configuration in
ice_dpll_init_info_sw_pins(): clear all SMA bits, then set SMA1 and
SMA2 as active inputs (DIR_EN=0) with U.FL1 output and U.FL2 input
disabled. Each SMA/U.FL pair shares a physical signal path so only
one pin per pair can be active at a time. U.FL pins still report
frequency 0 after this fix: U.FL1 (output-only) is disabled by
ICE_SMA1_TX_EN which keeps the TX output buffer off, and U.FL2
(input-only) is disabled by ICE_SMA2_UFL2_RX_DIS. They can be
activated by changing the corresponding SMA pin direction via dpll
netlink.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-7-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On certain E810 configurations where firmware supports Tx scheduler
topology switching (tx_sched_topo_comp_mode_en), ice_cfg_tx_topo()
may need to apply a new 5-layer or 9-layer topology from the DDP
package. If the AQ command to set the topology fails (e.g. due to
invalid DDP data or firmware limitations), the global configuration
lock must still be cleared via a CORER reset.
Commit 86aae43f21 ("ice: don't leave device non-functional if Tx
scheduler config fails") correctly fixed this by refactoring
ice_cfg_tx_topo() to always trigger CORER after acquiring the global
lock and re-initialize hardware via ice_init_hw() afterwards.
However, commit 8a37f9e2ff ("ice: move ice_deinit_dev() to the end
of deinit paths") later moved ice_init_dev_hw() into ice_init_hw(),
breaking the reinit path introduced by 86aae43f21. This creates an
infinite recursive call chain:
ice_init_hw()
ice_init_dev_hw()
ice_cfg_tx_topo() # topology change needed
ice_deinit_hw()
ice_init_hw() # reinit after CORER
ice_init_dev_hw() # recurse
ice_cfg_tx_topo()
... # stack overflow
Fix by moving ice_init_dev_hw() back out of ice_init_hw() and calling
it explicitly from ice_probe() and ice_devlink_reinit_up(). The third
caller, ice_cfg_tx_topo(), intentionally does not need ice_init_dev_hw()
during its reinit, it only needs the core HW reinitialization. This
breaks the recursion cleanly without adding flags or guards.
The deinit ordering changes from commit 8a37f9e2ff ("ice: move
ice_deinit_dev() to the end of deinit paths") which fixed slow rmmod
are preserved, only the init-side placement of ice_init_dev_hw() is
reverted.
Fixes: 8a37f9e2ff ("ice: move ice_deinit_dev() to the end of deinit paths")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-6-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi().
When the VSI rebuild fails (e.g. during NVM firmware update via
nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path,
leaving txq_map and rxq_map as NULL. The subsequent unconditional call
to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in
ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0].
The single-VF reset path in ice_reset_vf() already handles this
correctly by checking the return value of ice_vf_reconfig_vsi() and
skipping ice_vf_post_vsi_rebuild() on failure.
Apply the same pattern to ice_reset_all_vfs(): check the return value
of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and
ice_eswitch_attach_vf() on failure. The VF is left safely disabled
(ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can
be recovered via a VFLR triggered by a PCI reset of the VF
(sysfs reset or driver rebind).
Note that this patch does not prevent the VF VSI rebuild from failing
during NVM update — the underlying cause is firmware being in a
transitional state while the EMP reset is processed, which can cause
Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This
patch only prevents the subsequent NULL pointer dereference that
crashes the kernel when the rebuild does fail.
crash> bt
PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5"
#0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee
#1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba
#2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540
#3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda
#4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997
#5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595
#6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2
[exception RIP: ice_ena_vf_q_mappings+0x79]
RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206
RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000
RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040
R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000
R13: 0000000000000010 R14: R15:
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice]
#8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice]
#9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice]
#10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4
#11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de
#12 [ff72159bcfe5bf18] kthread at ffffffffaa946663
#13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9
The panic occurs attempting to dereference the NULL pointer in RDX at
ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi).
The faulting VSI is an allocated slab object but not fully initialized
after a failed ice_vsi_rebuild():
crash> struct ice_vsi 0xff34c9efc27d4828
netdev = 0x0,
rx_rings = 0x0,
tx_rings = 0x0,
q_vectors = 0x0,
txq_map = 0x0,
rxq_map = 0x0,
alloc_txq = 0x10,
num_txq = 0x10,
alloc_rxq = 0x10,
num_rxq = 0x10,
The nvmupdate64e process was performing NVM firmware update:
crash> bt 0xff34c9edd1a30000
PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e"
#0 [ff72159bcd617618] __schedule at ffffffffab5333f8
#4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice]
#5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice]
#6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice]
#7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice]
#8 [ff72159bcd6178b8] ice_read_flat_nvm at ffffffffc0a4034c [ice]
#9 [ff72159bcd617918] ice_devlink_nvm_snapshot at ffffffffc0a6ffa5 [ice]
dmesg:
ice 0000:13:00.0: firmware recommends not updating fw.mgmt, as it
may result in a downgrade. continuing anyways
ice 0000:13:00.1: ice_init_nvm failed -5
ice 0000:13:00.1: Rebuild failed, unload and reload driver
Fixes: 12bb018c53 ("ice: Refactor VF reset")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-5-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The V1 ADD_VLAN opcode had no success handler; filters sent via V1
stayed in ADDING state permanently. Add a fallthrough case so V1
filters also transition ADDING -> ACTIVE on PF confirmation.
Critically, add an `if (v_retval) break` guard: the error switch in
iavf_virtchnl_completion() does NOT return after handling errors,
it falls through to the success switch. Without this guard, a
PF-rejected ADD would incorrectly mark ADDING filters as ACTIVE,
creating a driver/HW mismatch where the driver believes the filter
is installed but the PF never accepted it.
For V2, this is harmless: iavf_vlan_add_reject() in the error
block already kfree'd all ADDING filters, so the success handler
finds nothing to transition.
Fixes: 968996c070 ("iavf: Fix VLAN_V2 addition/rejection")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-4-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The VLAN filter DELETE path was asymmetric with the ADD path: ADD
waits for PF confirmation (ADD -> ADDING -> ACTIVE), but DELETE
immediately frees the filter struct after sending the DEL message
without waiting for the PF response.
This is problematic because:
- If the PF rejects the DEL, the filter remains in HW but the driver
has already freed the tracking structure, losing sync.
- Race conditions between DEL pending and other operations
(add, reset) cannot be properly resolved if the filter struct
is already gone.
Add IAVF_VLAN_REMOVING state to make the DELETE path symmetric:
REMOVE -> REMOVING (send DEL) -> PF confirms -> kfree
-> PF rejects -> ACTIVE
In iavf_del_vlans(), transition filters from REMOVE to REMOVING
instead of immediately freeing them. The new DEL completion handler
in iavf_virtchnl_completion() frees filters on success or reverts
them to ACTIVE on error.
Update iavf_add_vlan() to handle the REMOVING state: if a DEL is
pending and the user re-adds the same VLAN, queue it for ADD so
it gets re-programmed after the PF processes the DEL.
The !VLAN_FILTERING_ALLOWED early-exit path still frees filters
directly since no PF message is sent in that case.
Also update iavf_del_vlan() to skip filters already in REMOVING
state: DEL has been sent to PF and the completion handler will
free the filter when PF confirms. Without this guard, the sequence
DEL(pending) -> user-del -> second DEL could cause the PF to return
an error for the second DEL (filter already gone), causing the
completion handler to incorrectly revert a deleted filter back to
ACTIVE.
Fixes: 968996c070 ("iavf: Fix VLAN_V2 addition/rejection")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-3-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a VF goes down, the driver currently sends DEL_VLAN to the PF for
every VLAN filter (ACTIVE -> DISABLE -> send DEL -> INACTIVE), then
re-adds them all on UP (INACTIVE -> ADD -> send ADD -> ADDING ->
ACTIVE). This round-trip is unnecessary because:
1. The PF disables the VF's queues via VIRTCHNL_OP_DISABLE_QUEUES,
which already prevents all RX/TX traffic regardless of VLAN filter
state.
2. The VLAN filters remaining in PF HW while the VF is down is
harmless - packets matching those filters have nowhere to go with
queues disabled.
3. The DEL+ADD cycle during down/up creates race windows where the
VLAN filter list is incomplete. With spoofcheck enabled, the PF
enables TX VLAN filtering on the first non-zero VLAN add, blocking
traffic for any VLANs not yet re-added.
Remove the entire DISABLE/INACTIVE state machinery:
- Remove IAVF_VLAN_DISABLE and IAVF_VLAN_INACTIVE enum values
- Remove iavf_restore_filters() and its call from iavf_open()
- Remove VLAN filter handling from iavf_clear_mac_vlan_filters(),
rename it to iavf_clear_mac_filters()
- Remove DEL_VLAN_FILTER scheduling from iavf_down()
- Remove all DISABLE/INACTIVE handling from iavf_del_vlans()
VLAN filters now stay ACTIVE across down/up cycles. Only explicit
user removal (ndo_vlan_rx_kill_vid) or PF/VF reset triggers VLAN
filter deletion/re-addition.
Fixes: ed1f5b58ea ("i40evf: remove VLAN filters on close")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-2-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename the IAVF_VLAN_IS_NEW state to IAVF_VLAN_ADDING to better
describe what the state represents: an ADD request has been sent to
the PF and is waiting for a response.
This is a pure rename with no behavioral change, preparing for a
cleanup of the VLAN filter state machine.
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-1-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Fix inverted check of registering the stats for branch tracing
When calling register_stat_tracer() which returns zero on success and
negative on error, the callers were checking the return of zero as an
error and printing a warning message. Because this was just a normal
printk() message and not a WARN(), it wasn't caught in any testing.
Fix the check to print the warning message when an error actually happens.
- Fix a typo in a comment in tracepoint.h
- Limit the size of event probes to 3K in size
It is possible to create a dynamic event probe via the tracefs system that
is greater than the max size of an event that the ring buffer can hold.
This basically causes the event to become useless. Limit the size of an
event probe to be 3K as that should be large enough to handle any dynamic
events being created, and fits within the PAGE_SIZE sub-buffers of the
ring buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCafJn9hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quUaAP9ezC2VXWugRIhOEmK0pIpY90zddsyv
xYTa3XuPP2r5JQEA8DcmH6fTo7JJxzbbyWPot/EgaqMt5XguqKC7txhjfww=
=+e7q
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix inverted check of registering the stats for branch tracing
When calling register_stat_tracer() which returns zero on success and
negative on error, the callers were checking the return of zero as an
error and printing a warning message. Because this was just a normal
printk() message and not a WARN(), it wasn't caught in any testing.
Fix the check to print the warning message when an error actually
happens.
- Fix a typo in a comment in tracepoint.h
- Limit the size of event probes to 3K in size
It is possible to create a dynamic event probe via the tracefs system
that is greater than the max size of an event that the ring buffer
can hold. This basically causes the event to become useless.
Limit the size of an event probe to be 3K as that should be large
enough to handle any dynamic events being created, and fits within
the PAGE_SIZE sub-buffers of the ring buffer.
* tag 'trace-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Limit size of event probe to 3K
tracepoint: Fix typo in tracepoint.h comment
tracing: branch: Fix inverted check on stat tracer registration
When page_pool_create_percpu() fails on page_pool_list(), it falls
through to its err_uninit: label, which calls page_pool_uninit().
At that point page_pool_init() has already taken two references
when the user requested PP_FLAG_ALLOW_UNREADABLE_NETMEM:
pool->mp_ops->init(pool)
static_branch_inc(&page_pool_mem_providers);
Neither is undone by page_pool_uninit(); both are only undone by
__page_pool_destroy() (success-side teardown). The error path
therefore leaks the per-provider reference taken by mp_ops->init
(io_zcrx_ifq->refs in the io_uring zcrx provider, the dmabuf
binding refcount in the devmem provider) plus one increment of
the page_pool_mem_providers static branch on every failure of
xa_alloc_cyclic() inside page_pool_list().
The leaked io_zcrx_ifq->refs in turn pins everything
io_zcrx_ifq_free() would release on cleanup: ifq->user (uid),
ifq->mm_account (mmdrop), ifq->dev (device refcount),
ifq->netdev_tracker (netdev refcount), and the rbuf region.
The leaked static branch increment forces all subsequent
page_pool_alloc_netmems() and page_pool_return_page() callers to
take the slow mp_ops branch for the lifetime of the kernel.
Reachable via the io_uring zcrx path:
io_uring_register(IORING_REGISTER_ZCRX_IFQ) /* CAP_NET_ADMIN */
-> __io_uring_register
-> io_register_zcrx
-> zcrx_register_netdev
-> netif_mp_open_rxq
-> driver ndo_queue_mem_alloc
-> page_pool_create_percpu
-> page_pool_init succeeds (mp_ops->init runs, branch++)
-> page_pool_list fails (xa_alloc_cyclic -ENOMEM)
-> goto err_uninit <-- leak
The same shape applies to the devmem dmabuf provider via
mp_dmabuf_devmem_init()/mp_dmabuf_devmem_destroy().
Restore the cleanup symmetry by moving the mp_ops->destroy() and
static_branch_dec() calls out of __page_pool_destroy() and into
page_pool_uninit(), so page_pool_uninit() is again the strict
inverse of page_pool_init(). page_pool_uninit() has only two
callers (the err_uninit: path and __page_pool_destroy()), so this
preserves the single-call invariant on the success path while
fixing the err path. The error path of page_pool_init() itself
still skips the mp_ops cleanup correctly: mp_ops->init is the
last action that takes a reference before page_pool_init() returns
0, so when it returns an error neither the refcount nor the static
branch has been touched.
Triggering the bug requires xa_alloc_cyclic() to fail with -ENOMEM,
which under normal GFP_KERNEL retry behaviour is rare. It is
deterministic under CONFIG_FAULT_INJECTION with fail_page_alloc /
xa fault injection, or under sustained memory pressure. The leak
is silent: there is no warning, and the released kernel build
continues running with a permanently-incremented static branch.
Fixes: 0f92140468 ("memory-provider: dmabuf devmem memory provider")
Signed-off-by: Hasan Basbunar <basbunarhasan@gmail.com>
Link: https://patch.msgid.link/20260428170739.34881-1-basbunarhasan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Always complete the airoha_dev_stop() routine regardless of the
airoha_set_vip_for_gdm_port() return value, since errors from
ndo_stop() are ignored by the networking stack and the interface is
always considered down after the call.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260428-airoha-ndo-stop-not-err-v1-1-674506d29a91@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VMBUS ring buffers must be page aligned. Therefore, the current value of
24K presents a challenge on ARM64 kernels (with 64K pages). So, use
VMBUS_RING_SIZE() to ensure they are always aligned and large enough to
hold all of the relevant data.
Cc: stable@vger.kernel.org
Fixes: 77ffe33363 ("hv_sock: use HV_HYP_PAGE_SIZE for Hyper-V communication")
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260428125339.13963-1-hamzamahfooz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IPv4/IPv6 and routing code is not very well separated from
the TCP/UDP code. Scope it down properly by providing a more
accurate file list, instead of net/ipv4/ and net/ipv6/
Now that the entry is more accurately representing layer 3
and routing merge in the nexthop entry into it.
Add Ido Schimmel as a co-maintainer, Ido's git history speaks
for itself.
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260428203924.1229169-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor clarifications in the README:
- call out what linters we expect to be clean
- make it clear that by "frameworks" we mean code under lib/
not just factoring code out in the same file
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit db359fccf2 ("mm: introduce a new page type for page pool in
page type") added a page_type field to struct net_iov at the same
offset as struct page::page_type, so that page_pool_set_pp_info() can
call __SetPageNetpp() uniformly on both pages and net_iovs.
The page-type API requires the field to hold the UINT_MAX "no type"
sentinel before a type can be set; for real struct page that invariant
is established by the page allocator on free. struct net_iov is not
allocated through the page allocator, so the field is left as zero
(io_uring zcrx, which uses __GFP_ZERO) or as slab garbage (devmem,
which uses kvmalloc_objs() without zeroing). When the page pool then
calls page_pool_set_pp_info() on a freshly-bound niov,
__SetPageNetpp()'s VM_BUG_ON_PAGE(page->page_type != UINT_MAX) fires
and the kernel BUGs. Triggered in selftests by io_uring zcrx setup
through the fbnic queue restart path:
kernel BUG at ./include/linux/page-flags.h:1062!
RIP: 0010:page_pool_set_pp_info (./include/linux/page-flags.h:1062
net/core/page_pool.c:716)
Call Trace:
<TASK>
net_mp_niov_set_page_pool (net/core/page_pool.c:1360)
io_pp_zc_alloc_netmems (io_uring/zcrx.c:1089 io_uring/zcrx.c:1110)
fbnic_fill_bdq (./include/net/page_pool/helpers.h:160
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:906)
__fbnic_nv_restart (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2470
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2874)
fbnic_queue_start (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2903)
netdev_rx_queue_reconfig (net/core/netdev_rx_queue.c:137)
__netif_mp_open_rxq (net/core/netdev_rx_queue.c:234)
io_register_zcrx (io_uring/zcrx.c:818 io_uring/zcrx.c:903)
__io_uring_register (io_uring/register.c:931)
__do_sys_io_uring_register (io_uring/register.c:1029)
do_syscall_64 (arch/x86/entry/syscall_64.c:63
arch/x86/entry/syscall_64.c:94)
</TASK>
The same path is reachable through devmem dmabuf binding via
netdev_nl_bind_rx_doit() -> net_devmem_bind_dmabuf_to_queue().
Add a net_iov_init() helper that stamps ->owner, ->type and the
->page_type sentinel, and use it from both the devmem and io_uring
zcrx niov init loops.
Fixes: db359fccf2 ("mm: introduce a new page type for page pool in page type")
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260428025320.853452-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There currently isn't a max limit an event probe can be. One could make an
event greater than PAGE_SIZE, which makes the event useless because if
it's bigger than the max event that can be recorded into the ring buffer,
then it will never be recorded.
A event probe should never need to be greater than 3K, so make that the
max size. As long as the max is less than the max that can be recorded
onto the ring buffer, it should be fine.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 93ccae7a22 ("tracing/kprobes: Support basic types on dynamic events")
Link: https://patch.msgid.link/20260428122302.706610ba@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged
* Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum
* Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification
* Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied
* Fix the GICD_IIDR revision number field that could never been
written correctly by userspace
* Make kvm_vcpu_initialized() correctly use its parameter instead
of relying on the surrounding context
* Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time
* Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems
* Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...).
* Spelling fixes
Selftests:
* Rename types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
* Fix Loongarch compilation.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmnvHfwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO+DQf/eEi0jLfQc7EBn6JQNU9AhegPDu0s
o76HQwI1/NuKodV8txpNKISvkwvc6CVzatAJLJ781VYu+a/lI9EXOsZI8dnlbYy4
M6j0Lo58rneEkb5rplzo8+ds300OZeXQBOlC7loCmLakhtEOrdrmfTVmi+U3BqdP
Q15kCEymuLLqxQggRivd2flyKHT7vY2HeuYJa+ocnqV8qNNUKDmyIwPoTbZ44Plo
c+EU7rOSwvFlYFDP19oViIwoW89/vUkF762U0EkLcsWwB4k5L8qoybog9cYAJ9u4
AG7wmwczkOlJKFwrIDD2Fx8JARqSIZhitwzT+zA/aUOtOl8fRwRKfHpsWw==
=PoE5
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"On top of a lot of Arm fixes, this includes a massive rename of types
and variables in tools/testing/selftests/kvm - these were
unnecessarily different from what the kernel uses, so they're being
made consistent.
arm64:
- Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged
- Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum
- Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification
- Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied
- Fix the GICD_IIDR revision number field that could never been
written correctly by userspace
- Make kvm_vcpu_initialized() correctly use its parameter instead of
relying on the surrounding context
- Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time
- Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems
- Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...)
- Spelling fixes
Selftests:
- Rename types across all KVM selftests to more closely align with
types used in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
- Fix Loongarch compilation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: selftests: Add check_steal_time_uapi() implementation for LoongArch
KVM: arm64: Wake-up from WFI when iqrchip is in userspace
KVM: arm64: Fix initialisation order in __pkvm_init_finalise()
KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu()
KVM: arm64: Fix kvm_vcpu_initialized() macro parameter
KVM: arm64: Fix FEAT_SPE_FnE to use PMSIDR_EL1.FnE, not PMSVer
KVM: arm64: Fix typo in feature check comments
KVM: arm64: Fix FEAT_Debugv8p9 to check DebugVer, not PMUVer
KVM: arm64: Reject non compliant SMCCC function calls in pKVM
KVM: arm64: vgic: Fix IIDR revision field extracted from wrong value
KVM: selftests: Replace "paddr" with "gpa" throughout
KVM: selftests: Replace "u64 nested_paddr" with "gpa_t l2_gpa"
KVM: selftests: Replace "u64 gpa" with "gpa_t" throughout
KVM: selftests: Replace "vaddr" with "gva" throughout
KVM: selftests: Clarify that arm64's inject_uer() takes a host PA, not a guest PA
KVM: selftests: Rename translate_to_host_paddr() => translate_hva_to_hpa()
KVM: selftests: Rename vm_vaddr_populate_bitmap() => vm_populate_gva_bitmap()
KVM: selftests: Rename vm_vaddr_unused_gap() => vm_unused_gva_gap()
KVM: selftests: Drop "vaddr_" from APIs that allocate memory for a given VM
KVM: selftests: Use u8 instead of uint8_t
...
In TAS2781 SPI mode, when accessing non-book-zero or page numbers greater
than 1 in book 0, an additional byte must be read. The first byte in such
cases is a dummy byte and should be ignored.
Fixes: 9fa6a693ad ("ALSA: hda/tas2781: Remove tas2781_spi_fwlib.c and leverage SND_SOC_TAS2781_FMWLIB")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20260429054206.429-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Eliminate the uninitialized 'nval' in cs35l56_hda_read_acpi() if a
system-specific quirk overrides processing of the dev-index property.
The value is now stored in a new 'num_amps' member of struct cs35l56_hda
so that the quirk handler can set the value.
The quirk for the Lenovo Yoga Book 9i GenX replaces the values from the
dev-index property with hardcoded indexes. So cs35l56_hda_read_acpi() would
then skip reading the property. But this left the 'nval' local variable
uninitialized when it is later passed to cirrus_scodec_get_speaker_id().
Fixes: 40b1c2f9b2 ("ALSA: hda/cs35l56: Workaround bad dev-index on Lenovo Yoga Book 9i GenX")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/linux-sound/aenFesLAStjrVNy8@stanley.mountain/T/#u
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260428130531.169600-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In cx_probe(), the return value of snd_hda_jack_detect_enable_callback()
is ignored. This function returns a pointer, and if it fails (e.g., due
to memory allocation failure), it returns an error pointer which must
be checked using IS_ERR().
If the registration fails, the driver continues to probe, but the jack
detection callback will not be registered. This can lead to a kernel
crash later when the driver attempts to handle jack events or accesses
the uninitialized structure.
Check the return value using IS_ERR() and propagate the error via
PTR_ERR() to the probe caller.
Fixes: 7aeb259086 ("ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140")
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260428080450.108801-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At parsing the channel mapping for HDMI, the current code may spew
WARN_ON() unnecessarily for the case where only invalid (zero) channel
maps are given from the hardware. Drop WARN_ON() and reorganize the
code a bit for avoiding the hdmi_slot over the array size.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221390
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260428061800.80527-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
