The VID_REG_FLD_MOD function takes the start and end bits as parameter
and will generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change VID_REG_FLD_MOD to take the mask as an argument instead,
and let the caller create the mask. Eventually, this mask will be moved
to a define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-10-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The VID_REG_GET function takes the start and end bits as parameter and
will generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change VID_REG_GET to take the mask as an argument instead, and
let the caller create the mask. Eventually, this mask will be moved to a
define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-9-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The REG_FLD_MOD function takes the start and end bits as parameter and
will generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change REG_FLD_MOD to take the mask as an argument instead, and
let the caller create the mask. Eventually, this mask will be moved to a
define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-8-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The REG_GET function takes the start and end bits as parameter and will
generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change REG_GET to take the mask as an argument instead, and let
the caller create the mask. Eventually, this mask will be moved to a
define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-7-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The dispc driver uses upper-cased, inlined, functions to provide
macro-like accessors to the dispc registers.
This is confusing, since upper-case is usually used by macros, and that
pattern will create gcc errors later on in this series.
Let's switch to macros to make it more consistent, and prevent those
errors down the line.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-2-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The simple display pipe is obsolete and the atomic helpers allow for
more control over the rendering process. As such, this patch replaces
the old simple display pipe system with the newer atomic helpers.
As the code is mainly the same, merely replaced with the new atomic
system, there should be no change in functionality.
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250818193553.2162-1-rubenru09@aol.com
Userspace jobs have drm_file.client_id as a unique identifier
as job's owners. For kernel jobs, we can allocate arbitrary
values - the risk of overlap with userspace ids is small (given
that it's a u64 value).
In the unlikely case the overlap happens, it'll only impact
trace events.
Since this ID is traced in the gpu_scheduler trace events, this
allows to determine the source of each job sent to the hardware.
To make grepping easier, the IDs are defined as they will appear
in the trace output.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://lore.kernel.org/r/20250604122827.2191-1-pierre-eric.pelloux-prayer@amd.com
Change the 'ret' variable from u32 to int to store -EINVAL. Storing the
negative error codes in unsigned type, doesn't cause an issue at runtime
but it's ugly as pants.
Additionally, assigning -EINVAL to u32 ret (i.e., u32 ret = -EINVAL) may
trigger a GCC warning when the -Wsign-conversion flag is enabled.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250828033917.113364-1-rongqianfeng@vivo.com
Since commit e7fa80e293 ("drm_gem: add mutex to drm_gem_object.gpuva")
it is possible for test_prepare_array() to exceed a stack frame size of
2048 bytes depending on the exact configuration of the kernel.
drivers/gpu/drm/tests/drm_exec_test.c: In function ‘test_prepare_array’:
drivers/gpu/drm/tests/drm_exec_test.c:171:1: error: the frame size of 2128 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
171 | }
| ^
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:287: drivers/gpu/drm/tests/drm_exec_test.o] Error 1
make[6]: *** Waiting for unfinished jobs....
In order to fix this, allocate the GEM objects in test_prepare_array()
with kzalloc(), rather than placing them on the stack.
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Christian König <christian.koenig@amd.com>
Fixes: e7fa80e293 ("drm_gem: add mutex to drm_gem_object.gpuva")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Nirmoy Das <nirmoyd@nvidia.com>
Link: https://lore.kernel.org/r/20250829075633.2306-1-dakr@kernel.org
[ Use kunit_kzalloc() instead of kzalloc(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The per-fd reset counter tracks GPU resets caused by jobs submitted
through a specific file descriptor. However, there's a race condition
where the file descriptor can be closed while jobs are still running,
leading to potential access to freed memory when updating the reset
counter.
Ensure that the per-fd reset counter is only updated when the file
descriptor is still valid, preventing use-after-free scenarios during
GPU reset handling.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250826-v3d-queue-lock-v3-6-979efc43e490@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
CPU jobs and CACHE CLEAN jobs execute synchronously once the DRM
scheduler starts running them. Therefore, there is no fence to wait on,
neither are those jobs able to timeout.
Hence, remove the `timedout_job` hook from the CPU and CACHE CLEAN
scheduler ops.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20250826-v3d-queue-lock-v3-5-979efc43e490@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Each V3D queue works independently and all the dependencies between the
jobs are handled through the DRM scheduler. Therefore, there is no need
to use one single lock for all queues. Using it, creates unnecessary
contention between different queues that can operate independently.
Replace the global spinlock with per-queue locks to improve parallelism
and reduce contention between different V3D queues (BIN, RENDER, TFU,
CSD). This allows independent queues to operate concurrently while
maintaining proper synchronization within each queue.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20250826-v3d-queue-lock-v3-3-979efc43e490@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Instead of storing the queue's active job in four different variables,
store the active job inside the queue's state. This way, it's possible
to access all active jobs using an index based in `enum v3d_queue`.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20250826-v3d-queue-lock-v3-2-979efc43e490@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Instead of storing a pointer to the DRM file data, store a pointer
directly to the private V3D file struct. No functional change, this
commit only avoids multiple levels of pointer indirection and makes
the code more straightforward.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20250826-v3d-queue-lock-v3-1-979efc43e490@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
ADV75xx hardware supports sending SPD InfoFrame over the HDMI link. Also
it provides support for two generic (Spare) InfoFrames. Use those
capabilities to be able to send SPD and HDMI Vendor-Specific Infoframes.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-adv7511-infoframes-v1-1-f89b9690f89c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Handle LVDS pixel clock.
The LTDC operates with multiple clock domains for register access,
requiring all clocks to be provided during read/write operations. This
imposes a dependency between the LVDS and LTDC to access correctly all
LTDC registers. And because both IPs' pixel rates must be synchronized,
the LTDC has to handle the LVDS clock.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-8-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
STM32MP25 SoC features a new version of the LTDC IP. Add its compatible
to the list of device to probe and implement its quirks.
This hardware supports a pad frequency of 150MHz and a peripheral bus
clock.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-7-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
On STM32MP25 SoC, the syscfg peripheral provides a clock to the display
subsystem through a multiplexer. Since it only provides a single clock,
the cell value is 0.
Doing so allows the clock consumers to reach the peripheral and gate the
clock accordingly.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Christophe Roullier <christophe.roullier@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-6-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
STM32 LVDS peripheral may be in a power domain. Allow an optional
single 'power-domains' entry for STM32 LVDS devices.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-5-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
This property is added when the peripheral is under the STM32 firewall
controller. It allows an accurate representation of the hardware, where
the peripheral is connected to a firewall bus. The firewall can then
check the peripheral accesses before allowing its device to probe.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-4-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Update the compatible to accept both "st,stm32mp255-lvds" and
st,stm32mp25-lvds" respectively. Default will fall back to
"st,stm32mp25-lvds".
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-3-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
This property is added when the peripheral is under the STM32 firewall
controller. It allows an accurate representation of the hardware, where
the peripheral is connected to a firewall bus. The firewall can then check
the peripheral accesses before allowing its device to probe.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-2-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
The new STMicroelectronics SoC features a display controller similar to
the one used in previous SoCs. Because there is additional registers,
and different mandatory clocks it is incompatible with existing IPs. On
STM32MP251, the device only needs two clocks while on STM32MP255 it
needs four.
Add the new names to the list of compatible string and handle each
quirks accordingly.
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-1-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Add driver extension for Synopsys DesignWare DPTX IP used
on Rockchip RK3588 SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Dmitry Baryshkov <lumag@kernel.org>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250822063959.692098-4-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The DW DP TX Controller is compliant with the DisplayPort Specification
Version 1.4 with the following features:
* DisplayPort 1.4a
* Main Link: 1/2/4 lanes
* Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
* AUX channel 1Mbps
* Single Stream Transport(SST)
* Multistream Transport (MST)
* Type-C support (alternate mode)
* HDCP 2.2, HDCP 1.3
* Supports up to 8/10 bits per color component
* Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
* Pixel clock up to 594MHz
* I2S, SPDIF audio interface
Add library with common helpers to make it can be shared with
other SoC.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250822063959.692098-3-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The Rockchip RK3588 SoC integrates the Synopsys DesignWare DPTX
controller. And this DPTX controller need share a USBDP PHY with
the USB 3.0 OTG controller during operation.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250822063959.692098-2-andyshrk@163.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The only callers to mmu_hw_do_operation_locked() pass an 'op' of either
AS_COMAND_FLUSH_MEM or AS_COMMAND_FLUSH_PT. This means the code paths
after that are dead. Removing those paths means the
mmu_hw_do_flush_on_gpu_ctrl() function might has well be inlined.
Simplify everything by having a switch statement for the type of 'op'
(warning if we get an unexpected value) and removing the dead cases.
Suggested-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Link: https://lore.kernel.org/r/20250815134226.57703-1-steven.price@arm.com
Since all users of gem.gpuva.lock_dep_map now rely on the mutex directly
in gpuva, we may remove it. Whether the mutex is used is now tracked by
a flag in gpuvm rather than by whether lock_dep_map is null.
Note that a GEM object may not be pushed to multiple gpuvms that
disagree on the value of this new flag. But that's okay because a single
driver should use the same locking scheme everywhere, and a GEM object
is driver specific (when a GEM is exported with prime, a new GEM object
instance is created from the backing dma-buf).
The flag is present even with CONFIG_LOCKDEP=n because the intent is
that the flag will also cause vm_bo cleanup to become deferred. However,
that will happen in a follow-up patch.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-3-bd89f5a82c0d@google.com
[ Use lockdep_is_held() instead of lock_is_held(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Now that drm_gem_object has a dedicated mutex for the gpuva list that is
intended to be used in cases that must be fence signalling safe, use it
in Panthor.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-2-bd89f5a82c0d@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
There are two main ways that GPUVM might be used:
* staged mode, where VM_BIND ioctls update the GPUVM immediately so that
the GPUVM reflects the state of the VM *including* staged changes that
are not yet applied to the GPU's virtual address space.
* immediate mode, where the GPUVM state is updated during run_job(),
i.e., in the DMA fence signalling critical path, to ensure that the
GPUVM and the GPU's virtual address space has the same state at all
times.
Currently, only Panthor uses GPUVM in immediate mode, but the Rust
drivers Tyr and Nova will also use GPUVM in immediate mode, so it is
worth to support both staged and immediate mode well in GPUVM. To use
immediate mode, the GEMs gpuva list must be modified during the fence
signalling path, which means that it must be protected by a lock that is
fence signalling safe.
For this reason, a mutex is added to struct drm_gem_object that is
intended to achieve this purpose. Adding it directly in the GEM object
both makes it easier to use GPUVM in immediate mode, but also makes it
possible to take the gpuva lock from core drm code.
As a follow-up, another change that should probably be made to support
immediate mode is a mechanism to postpone cleanup of vm_bo objects, as
dropping a vm_bo object in the fence signalling path is problematic for
two reasons:
* When using DRM_GPUVM_RESV_PROTECTED, you cannot remove the vm_bo from
the extobj/evicted lists during the fence signalling path.
* Dropping a vm_bo could lead to the GEM object getting destroyed.
The requirement that GEM object cleanup is fence signalling safe is
dubious and likely to be violated in practice.
Panthor already has its own custom implementation of postponing vm_bo
cleanup.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250827-gpuva-mutex-in-gem-v3-1-bd89f5a82c0d@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250828085708.3383760-1-nichen@iscas.ac.cn
In drm_sched_fini() all entities are marked as stopped - without taking
the appropriate lock, because that would deadlock. That means that
drm_sched_fini() and drm_sched_entity_push_job() can race against each
other.
This should most likely be fixed by establishing the rule that all
entities associated with a scheduler must be torn down first. Then,
however, the locking should be removed from drm_sched_fini() alltogether
with an appropriate comment.
Reported-by: James Flowers <bold.zone2373@fastmail.com>
Link: https://lore.kernel.org/dri-devel/20250720235748.2798-1-bold.zone2373@fastmail.com/
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250813085654.102504-2-phasta@kernel.org
The header file <linux/atomic.h> is already included on line 8. Remove the
redundant include.
Fixes: 5a99350794 ("drm/sched: Add scheduler unit testing infrastructure and some basic tests")
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250819142630.368796-1-liaoyuanhong@vivo.com
Indirect buffers are an AMD term describing essentialy a job submitted to
the scheduler, just a lower level one. Since scheduler was promoted to be
generic long ago, lets replace those references with jobs.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250814133627.2550-1-tvrtko.ursulin@igalia.com
Bitwise AND was intended instead of OR. With the current code the
condition is always true.
Fixes: cbdd16b818 ("HID: i2c-hid: Make elan touch controllers power on after panel is enabled")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/aK8Au3CgZSTvfEJ6@stanley.mountain
Add support for DRM_FORMAT_C8 to vesadrm. The new pixel-format
description PIXEL_FORMAT_C8 describes the layout. Vesadrm's helpers
vesadrm_fill_palette_lut() and vesadrm_load_palette_lut() set the
hardware palette according to the CRTC's output format.
The driver emulates XRGB8888 by converting the source buffer to
RGB332 and using the resulting 256 colors as index into the hardware
palette. The hardware palette converts back to RGB during scanout.
This has no overhead compared to other format conversion, but allows
common userspace, such as Wayland compositors, to operate on the
display.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-10-tzimmermann@suse.de
Distiguish between component-based formats and 'the rest' in vesadrm's
color management. Scanout buffers with component-based format allow
for gamma correction. Palette-based formats (i.e., 'the rest') require
palette setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-9-tzimmermann@suse.de
Rename vesadrm's gamma helpers in preparation of the upcoming support
for color palettes. Gamma correction and color palettes share the same
hardware features, but the driver's old naming only indicated support
for gamma LUTs.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-8-tzimmermann@suse.de
