Shawn Lin <shawn.lin@rock-chips.com> says:
This patchset adds initial UFS controller supprt for RK3576 SoC.
Patch 1 is the dt-bindings. Patch 2-4 deal with rpm and spm support
in advanced suggested by Ulf. Patch 5 exports two new APIs for host
driver. Patch 6 and 7 are the host driver and dtsi support.
Link: https://lore.kernel.org/r/1738736156-119203-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add ufshc node to rk3576.dtsi, so the board using UFS could enable it.
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1738736156-119203-8-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
RK3576 SoC contains a UFS controller, add initial support for it.
The features are:
1. support UFS 2.0 features
2. High speed up to HS-G3
3. 2RX-2TX lanes
4. auto H8 entry and exit
Software limitation:
1. HCE procedure: enable controller->enable intr->dme_reset->dme_enable
2. disable unipro timeout values before power mode change
[mkp: fix build errors]
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1738736156-119203-7-git-send-email-shawn.lin@rock-chips.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These two APIs will be used by glue driver if they need a different HCE
process.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1738736156-119203-6-git-send-email-shawn.lin@rock-chips.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To resolve the build error with undefined reference to
`arm_smccc_1_1_get_conduit', let's add a build dependency to
HAVE_ARM_SMCCC_DISCOVERY.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 61eeb96787 ("pmdomain: rockchip: Check if SMC could be handled by TA")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ziqi Chen <quic_ziqichen@quicinc.com> says:
With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency
plans. However, the gear speed is only toggled between min and max during
clock scaling. Enable multi-level gear scaling by mapping clock frequencies
to gear speeds, so that when devfreq scales clock frequencies we can put
the UFS link at the appropraite gear speeds accordingly.
This series has been tested on below platforms -
sm8550 mtp + UFS3.1
SM8650 MTP + UFS3.1
SM8750 MTP + UFS4.0
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Link: https://lore.kernel.org/r/20250213080008.2984807-1-quic_ziqichen@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add UFS driver sysfs attributes clkscale_enable, clkgate_enable and
clkgate_delay_ms to this document.
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-9-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During clock scaling, Write Booster is toggled on or off based on whether
the clock is scaled up or down. However, with OPP V2 powered multi-level
gear scaling, the gear can be scaled amongst multiple gear speeds, e.g., it
may scale down from G5 to G4, or from G4 to G2. To provide flexibilities,
add a new field for clock scaling such that during clock scaling Write
Booster can be enabled or disabled based on gear speeds but not based on
scaling up or down.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-8-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When disabling clkscale via the clkscale_enable sysfs entry, UFS driver
shall perform scaling up once regardless. Check if scaling up is required
or not first to avoid repetitive work.
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-7-quic_ziqichen@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency
plans. However, the gear speed is only toggled between min and max during
clock scaling. Enable multi-level gear scaling by mapping clock frequencies
to gear speeds, so that when devfreq scales clock frequencies we can put
the UFS link at the appropriate gear speeds accordingly.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-6-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement the freq_to_gear_speed() vop to map the unipro core clock
frequency to the corresponding maximum supported gear speed.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-5-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a vop to map UFS host controller clock frequencies to the corresponding
maximum supported UFS high speed gear speeds. During clock scaling, we can
map the target clock frequency, demanded by devfreq, to the maximum
supported gear speed, so that devfreq can scale the gear to the highest
gear speed supported at the target clock frequency, instead of just scaling
up/down the gear between the min and max gear speeds.
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-4-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of only two frequencies, if OPP V2 is used, the UFS devfreq clock
scaling may scale the clock among multiple frequencies. In the case of
scaling up, the devfreq may decide to scale the clock to an intermediate
freq based on load, but the clock scale up pre change operation uses
settings for the max clock freq unconditionally. Fix it by passing the
target_freq to clock scale up pre change so that the correct settings for
the target_freq can be used.
In the case of scaling down, the clock scale down post change operation is
doing fine, because it reads the actual clock rate to tell freq, but to
keep symmetry with clock scale up pre change operation, just use the
target_freq instead of reading clock rate.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-3-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of only two frequencies, if OPP V2 is used, the UFS devfreq clock
scaling may scale the clock among multiple frequencies, so just passing
up/down to vop clk_scale_notify() is not enough to cover the intermediate
clock freqs between the min and max freqs. Hence pass the target_freq,
which will be used in successive commits, to clk_scale_notify() to allow
the vop to perform corresponding configurations with regard to the clock
freqs.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-2-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> says:
This patch series adds support for the MCTP passthrough function over
the MPI interface for management commands. Also fix issue related to
task management handling during IOCTL timeout.
Link: https://lore.kernel.org/r/1739410016-27503-1-git-send-email-shivasharan.srikanteshwara@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MPI specification defines support for sending MCTP management commands
as a passthrough function to the IOC. Add support for driver to discover
the IOC capability to support MCTP passthrough function. Driver will
support applications and kernel modules to send MPT commands containing the
MCTP passthrough request to firmware through an MPI request.
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Link: https://lore.kernel.org/r/1739410016-27503-3-git-send-email-shivasharan.srikanteshwara@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since 'commit 104cd58d9a ("scsi: ufs: qcom: Remove support for host
controllers older than v2.0")', some of the parameters passed into the
ufs_qcom_cfg_timers() function have become dead code. Clean up
ufs_qcom_cfg_timers() function to improve the readability.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/547c484ce80fe3624ee746954b84cae28bd38a09.1739985266.git.quic_nguyenb@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Non-existent trusted-firmware could lead to SMC calls into some unset
location, that breaks the system. Let's check that it's supported before
executing the SMC.
Reported-by: Steven Price <steven.price@arm.com>
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 58ebba35dd ("pmdomain: rockchip: Add smc call to inform firmware")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/1739926689-151827-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Call mutex_unlock(&ioc->hostdiag_unlock_mutex) once from error paths
instead of twice.
This patch fixes the following Clang -Wthread-safety errors:
drivers/scsi/mpt3sas/mpt3sas_base.c:8085:2: error: mutex 'ioc->hostdiag_unlock_mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis]
8085 | pci_cfg_access_unlock(ioc->pdev);
| ^
drivers/scsi/mpt3sas/mpt3sas_base.c:8019:2: note: mutex acquired here
8019 | mutex_lock(&ioc->hostdiag_unlock_mutex);
| ^
./include/linux/mutex.h:171:26: note: expanded from macro 'mutex_lock'
171 | #define mutex_lock(lock) mutex_lock_nested(lock, 0)
| ^
drivers/scsi/mpt3sas/mpt3sas_base.c:8085:2: error: mutex 'ioc->hostdiag_unlock_mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis]
8085 | pci_cfg_access_unlock(ioc->pdev);
| ^
drivers/scsi/mpt3sas/mpt3sas_base.c:8019:2: note: mutex acquired here
8019 | mutex_lock(&ioc->hostdiag_unlock_mutex);
| ^
./include/linux/mutex.h:171:26: note: expanded from macro 'mutex_lock'
171 | #define mutex_lock(lock) mutex_lock_nested(lock, 0)
| ^
drivers/scsi/mpt3sas/mpt3sas_base.c:8087:2: error: releasing mutex 'ioc->hostdiag_unlock_mutex' that was not held [-Werror,-Wthread-safety-analysis]
8087 | mutex_unlock(&ioc->hostdiag_unlock_mutex);
| ^
Cc: Ranjan Kumar <ranjan.kumar@broadcom.com>
Fixes: c0767560b0 ("scsi: mpt3sas: Reload SBR without rebooting HBA")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250210203936.2946494-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make all error paths unlock rioc->bsg_cmds.mutex.
This patch fixes the following Clang -Wthread-safety errors:
drivers/scsi/mpi3mr/mpi3mr_app.c:2835:1: error: mutex 'mrioc->bsg_cmds.mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis]
2835 | }
| ^
drivers/scsi/mpi3mr/mpi3mr_app.c:2332:6: note: mutex acquired here
2332 | if (mutex_lock_interruptible(&mrioc->bsg_cmds.mutex))
| ^
./include/linux/mutex.h:172:40: note: expanded from macro 'mutex_lock_interruptible'
172 | #define mutex_lock_interruptible(lock) mutex_lock_interruptible_nested(lock, 0)
| ^
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Fixes: fb231d7def ("scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-2")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250210203936.2946494-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
strncpy() is deprecated for NUL-terminated destination buffers. Replace
memset() and strncpy() with strscpy_pad() to copy the version string and
fill the remaining bytes in the destination buffer with NUL bytes. This
avoids zeroing the memory before copying the string.
Compile-tested only.
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250213114047.2366-2-thorsten.blum@linux.dev
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While replacing strncpy() with strscpy(), Bart Van Assche pointed out
that the code occurs inside sysfs write callbacks, which already uses
NUL-terminated strings. This allows the string to be passed directly to
sscanf() without requiring a temporary copy.
Remove the deprecated and unnecessary strncpy() and the corresponding
local variables, and pass the buffer buf directly to sscanf().
Replace sscanf() with kstrtoint() to silence checkpatch warnings.
Compile-tested only.
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Cc: Kees Cook <kees@kernel.org>
Cc: David Laight <david.laight.linux@gmail.com>
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250214114302.86001-2-thorsten.blum@linux.dev
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Include the ufs_hba structure as a parameter in various trace events to
provide more context and improve debugging capabilities. Also remove
dev_name which can replace by dev_name(hba->dev).
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250214083026.1177880-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For some usecases a consumer driver requires its device to remain power-on
from the PM domain perspective during runtime. Using dev PM qos along with
the genpd governors, doesn't work for this case as would potentially
prevent the device from being runtime suspended too.
To support these usecases, let's introduce dev_pm_genpd_rpm_always_on() to
allow consumers drivers to dynamically control the behaviour in genpd for a
device that is attached to it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1738736156-119203-4-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add ROCKCHIP_SIP_SUSPEND_MODE to pass down parameters to Trusted Firmware
in order to decide suspend mode. Currently only add ROCKCHIP_SLEEP_PD_CONFIG
which teaches firmware to power down controllers or not.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/1738736156-119203-3-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The third pwr_change_notify() argument is an input parameter. Make this
explicit by declaring it 'const'.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250212213838.1044917-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The names RESERVE and RELEASE are not only used in <scsi/scsi_proto.h> but
also elsewhere in the kernel:
$ git grep -nHE 'define[[:blank:]]*(RESERVE|RELEASE)[[:blank:]]'
drivers/input/joystick/walkera0701.c:13:#define RESERVE 20000
drivers/s390/char/tape_std.h:56:#define RELEASE 0xD4 /* 3420 NOP, 3480 REJECT */
drivers/s390/char/tape_std.h:58:#define RESERVE 0xF4 /* 3420 NOP, 3480 REJECT */
Additionally, while the names of the symbolic constants RESERVE_10 and
RELEASE_10 include the command length, the command length is not included
in the RESERVE and RELEASE names. Address both issues by renaming the
RESERVE and RELEASE constants into RESERVE_6 and RELEASE_6 respectively.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250210205031.2970833-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Martin hi,
The UFS4.1 standard, released on January 8, 2025, added a new exception
event: HEALTH_CRITICAL, which notifies the host of a device's critical
health condition. This notification implies that the device is approaching
the end of its lifetime based on the amount of performed program/erase
cycles.
Once an EOL (End-of-Life) exception event is received, we increment a
designated member, which is exposed via a sysfs entry. This new entry, will
report the number of times a critical health event has been reported by a
UFS device.
To handle this new sysfs entry, userspace applications can use select(),
poll(), or epoll() to monitor changes in the critical_health attribute. The
kernel will call sysfs_notify() to signal changes, allowing the userspace
application to detect and respond to these changes efficiently.
The host can gain further insight into the specific issue by reading one of
the following attributes: bPreEOLInfo, bDeviceLifeTimeEstA,
bDeviceLifeTimeEstB, bWriteBoosterBufferLifeTimeEst, and
bRPMBLifeTimeEst. All those are available for reading via the driver's
sysfs entries or through an applicable utility. It is up to userspace to
read these attributes if needed.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250211065813.58091-1-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32c(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20250207041724.70733-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are some typos in comments/messages:
- Nin -> Min
- occuring -> occurring
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Link: https://lore.kernel.org/r/20250206084905.11327-1-algonell@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SPC document states that "The COMMAND DATA LENGTH field indicates the
length in bytes of the command descriptor list".
The length should be subtracted by 4 to represent the length of the
description list, not 3.
Signed-off-by: Chaohai Chen <wdhh66@163.com>
Link: https://lore.kernel.org/r/20250115070739.216154-1-wdhh66@163.com
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
-----BEGIN PGP SIGNATURE-----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=uAVD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Suppress false-positive -Wformat-{overflow,truncation}-non-kprintf
warnings regardless of the W= option
- Avoid CONFIG_TRIM_UNUSED_KSYMS dropping symbols passed to symbol_get()
- Fix a build regression of the Debian linux-headers package
* tag 'kbuild-fixes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: install-extmod-build: add missing quotation marks for CC variable
kbuild: fix misspelling in scripts/Makefile.lib
kbuild: keep symbols for symbol_get() even with CONFIG_TRIM_UNUSED_KSYMS
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
Fix a recently introduced kernel crash due to a NULL pointer
dereference during system-wide suspend (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=32hC
-----END PGP SIGNATURE-----
Merge tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced kernel crash due to a NULL pointer
dereference during system-wide suspend (Rafael Wysocki)"
* tag 'pm-6.14-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Restrict power.set_active propagation
* Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
* Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
* Stop pretending that we can run the protected mode without a GICv3
being present on the host
* Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
* Always evaluate the need to arm a background timer for fully emulated
guest timers
* Fix the emulation of EL1 timers in the absence of FEAT_ECV
* Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
* move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code. As an initial set of cleanups, move
some code from mm/gmap into kvm and start using __kvm_faultin_pfn()
to fault-in pages as needed; but especially stop abusing page->index
and page->lru to aid in the pgdesc conversion.
x86:
* Add missing check in the fix to defer starting the huge page recovery
vhost_task
* SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmemTnEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP97gf/Rew+yEsRrHVk/j0R2XwFx51raYZy
eaicv07jYmwsnaALq6BEj4xxDW8dJEJgj05Czm1o9+9x8nvY2+UjT2q4J8fY9xdD
Yr+5GvEEz4x2GNL3ZYE3iHTNFQckNxOgMilLW3br1E+wjusShKmgGxPYTRyClQ34
gDBZQWzOG22UNC6PbW9dgTK54b57+NJdIZYuHz4LkMsTvzf6jXo5VumsgbbZqC4e
VGh5EUEPL7+cNzGY/+WURXI6OojdPzbneH1NP82uT3lo2WaHK9+B3N6H+W71N/T4
u1P7+g0WmdNj3FITvDpTJ7jNhke2atEjI9rvtHz6gwtf9SIujyuNl55uRA==
=r0h9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
Commit 3775fc538f ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f ("PM: sleep: core: Synchronize runtime PM status of parents and children")
Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
- Fix stackinit KUnit regression on m68k
- Use ARRAY_SIZE() for memtostr*()/strtomem*()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ6fBgQAKCRA2KwveOeQk
u1HdAQCstqRZjXUqdG1jX56g1cW7RoLDtZC3Y9npyhVByUmFHgEAjsH1gmQcNswX
676kSkJaB3Iv4yQ17ozjlBWEd4xroAs=
=YibW
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"Address a KUnit stack initialization regression that got tickled on
m68k, and solve a Clang(v14 and earlier) bug found by 0day:
- Fix stackinit KUnit regression on m68k
- Use ARRAY_SIZE() for memtostr*()/strtomem*()"
* tag 'hardening-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string.h: Use ARRAY_SIZE() for memtostr*()/strtomem*()
compiler.h: Introduce __must_be_byte_array()
compiler.h: Move C string helpers into C-only kernel section
stackinit: Fix comment for test_small_end
stackinit: Keep selftest union size small on m68k
- Allow uretprobe on x86_64 to avoid behavioral complications (Eyal Birger)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ6e/FAAKCRA2KwveOeQk
u/xCAP9gd2nRw9jXgpg/CCfxkX0Yj3/pnzQoCDlS2lWy43BWNgEAtcJFDvz2Lg09
omRld7QHjbMhNqihYgXRyD0nzX42uwY=
=0JOg
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"This is really a work-around for x86_64 having grown a syscall to
implement uretprobe, which has caused problems since v6.11.
This may change in the future, but for now, this fixes the unintended
seccomp filtering when uretprobe switched away from traps, and does so
with something that should be easy to backport.
- Allow uretprobe on x86_64 to avoid behavioral complications (Eyal
Birger)"
* tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: validate uretprobe syscall passes through seccomp
seccomp: passthrough uretprobe systemcall without filtering
- alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
(Eric W. Biederman)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ6e+TgAKCRA2KwveOeQk
u/48AQC+DeV54+UA08YV+RdlZfCydMyDkCfdBcV6tcExs4C4tgD/RCRsfyPTB1oj
PXVONVL88M6IYBIvtgYAzDcPpZuRBQ4=
=qCPe
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fix from Kees Cook:
"This is an alpha-specific fix, but since it touched ELF I was asked to
carry it.
- alpha/elf: Fix misc/setarch test of util-linux by removing 32bit
support (Eric W. Biederman)"
* tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
A number of fairly small fixes, mostly in drivers but two in the core
to change a retry for depopulation (a trendy new hdd thing that
reorganizes blocks away from failing elements) and one to fix a GFP_
annotation to avoid a lock dependency (the third core patch is all in
testing).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ6evOyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishcCLAP410FjL
Bjf3KW2Kxykg500vWfkjtxilW8f/5kBmLa50LQEA9qV8H17nNPk1VQvugnjElN/B
TqEApyOutoeFvqu9Uig=
=3COU
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A number of fairly small fixes, mostly in drivers but two in the core
to change a retry for depopulation (a trendy new hdd thing that
reorganizes blocks away from failing elements) and one to fix a GFP_
annotation to avoid a lock dependency (the third core patch is all in
testing)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla1280: Fix kernel oops when debug level > 2
scsi: ufs: core: Fix error return with query response
scsi: storvsc: Set correct data length for sending SCSI command without payload
scsi: ufs: core: Fix use-after free in init error and remove paths
scsi: core: Do not retry I/Os during depopulation
scsi: core: Use GFP_NOIO to avoid circular locking dependency
scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed
scsi: ufs: core: Ensure clk_gating.lock is used only after initialization
scsi: ufs: core: Simplify temperature exception event handling
scsi: target: core: Add line break to status show
scsi: ufs: core: Fix the HIGH/LOW_TEMP Bit Definitions
scsi: core: Add passthrough tests for success and no failure definitions
It turned out the new mechanism for handling created devices does not
handle all muxing cases. Revert the changes to give a proper solution
more time.
-----BEGIN PGP SIGNATURE-----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=uhz5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c reverts from Wolfram Sang:
"It turned out the new mechanism for handling created devices does not
handle all muxing cases.
Revert the changes to give a proper solution more time"
* tag 'i2c-for-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: Replace list-based mechanism for handling auto-detected clients"
Revert "i2c: Replace list-based mechanism for handling userspace-created clients"
