We need to block DC6 entry in case of Panel Replay as enabling VBI doesn't
prevent DC6 in case of Panel Replay. This causes problems if user-space is
polling for vblank events.
Fix this by setting target DC state as DC_STATE_EN_UPTO_DC5 when both
source and sink are supporting eDP Panel Replay and VBI is enabled.
v4:
- s/vblank_work/vblank_dc_work/
- changed type of block_dc_for_vblank to bool
v3:
- do flush_work for vblank_work on intel_crtc_vblank_off
- no need to use READ_ONCE in bdw_enable_vblank
- check crtc->block_dc_for_vblank in bdw_disable_vblank as well
- move adding block_dc_for_vblank into this patch
v2:
- use READ_ONCE in intel_display_vblank_work
- use DC_STATE_DISABLE instead of DC_STATE_EN_UPTO_DC6
- use intel_crtc->block_dc6_needed
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2296
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240920062340.1333777-3-jouni.hogander@intel.com
We need to block DC6 entry in case of Panel Replay as enabling VBI doesn't
prevent it in case of Panel Replay. Panel Replay switches main link off on
DC entry. This means vblank interrupts are not fired and is a problem if
user-space is polling for vblank events. For this purpose add new function
to query need for dc entry blocking on.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240920062340.1333777-2-jouni.hogander@intel.com
We've now completely stopped using drm_i915_gem_object in display code
that gets built for xe. Kill off the -Ddrm_i915_gem_object=xe_bo
hack. Good riddance.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0eae2b62b635acafe5dc97dc4b205aaa34ce1e53.1726589119.git.jani.nikula@intel.com
Prefer the driver agnostic struct drm_gem_object over i915 specific
struct drm_i915_gem_object.
Do some opportunistic struct intel_display conversions while at it,
because it's more convenient to deal with.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/51bdb3c9b798e28bd70c259fc3874d80bc9b7443.1726589119.git.jani.nikula@intel.com
intel_fb_obj() returns struct drm_i915_gem_object, which is not right
for xe, and only works because xe defines
-Ddrm_i915_gem_object=xe_bo. Switch to intel_fb_bo() and convert to
struct xe_bo from there.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/39f3d52cf156aecc4b2ed5cf1c9342b1c15143b4.1726589119.git.jani.nikula@intel.com
Prefer the driver agnostic struct drm_gem_object over i915 specific
struct drm_i915_gem_object.
The xe specific intel_fb_bo.h becomes redundant. Remove it, and rely on
the common header in i915 display.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0efbc9ae2dbe157f92fa71d423ed37fd17346da5.1726589119.git.jani.nikula@intel.com
The display code needs to deal with gem objects, and mostly uses struct
drm_i915_gem_object. That's not great, because for xe we need to
redefine it struct xe_bo during build.
Start a common interface using struct drm_gem_object, with separate
implementations for i915 and xe. For starters, convert i9xx_wm.c to use
it.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/df6867523a0b5fdd4eb63f657f545603ae6f6e0b.1726589119.git.jani.nikula@intel.com
The raw register reads/writes are there as micro-optimizations to avoid
multiple pointer indirections on uncore->regs. Presumably this is useful
when there are plenty of register reads/writes in the same
function. However, the display irq handling only has a few raw
reads/writes. Remove them for simplification.
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408125445.3227678-1-jani.nikula@intel.com
intel_dp_init_connector() is no place for detecting stuff via
DPCD (except perhaps for eDP). Move the colorimetry stuff into
a more appropriate place.
Cc: Jouni Högander <jouni.hogander@intel.com>
Fixes: 00076671a6 ("drm/i915/display: Move colorimetry_support from intel_psr to intel_dp")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918190441.29071-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Clean up the main commit_tail() codepath a bit by pulling
the post plane update steps that need to performed after
readout into their own little function
(intel_post_plane_update_after_readout()).
Declutters intel_atomic_commit_tail() a bit, and should
hopefully aid in keeping intel_pre_plane_update() vs.
intel_post_plane_update*() in sync.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916152958.17332-3-ville.syrjala@linux.intel.com
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Joiners have specific enabling and disabling order dependent on primary
and secondary pipes. This becomes more complex with ultrajoiner where we
have ultrajoiner primary/secondary pipes in addition to bigjoiner
primary/secondary pipes. To unify the approach that works for present
and future joiner cases, use primary and secondary pipe masks to
iterate over pipes.
If joiner is used, derive bigoiner primary and secondary pipe masks
and use following sequences:
Disabling : disable primary pipes followed by secondary pipes,
Enabling: enable secondary pipes followed by primary pipes.
This works well with ultrajoiner too, as ultrajoiner has 2 bigjoiner
primary/secondary pairs (AC, BD).
For non joiner case, enable/disable based on usual pipe order A-D, D-A
respectively.
v2:
-Simplify the iterator macro. (Ville)
-Use struct intel_display. (Ville)
-Add prefix _intel to the helper name. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918063016.2667721-3-ankit.k.nautiyal@intel.com
In most of the cases we now try to avoid mentioning things like
"bigjoiner" or "ultrajoiner" trying to unify the API and refer
mostly to all this functionality as "joiner".
In majority cases that should be way to go.
However in some cases we still need to distinguish between
bigjoiner primaries and secondaries(such as DSC register programming).
Create correspondent helper functions and start using them,
in order be prepared for adding ultrajoiner functionality.
v2: Fixed checkpatch warnings (Ankit)
v3: Introduce ultrajoiner helpers in next patch.
v4: Streamline the helpers and add few more. (Ville)
v5: Add comment to clarify that helpers apply to both bigjoiner and
uncompressed joiner configurations. (Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918063016.2667721-2-ankit.k.nautiyal@intel.com
Add dedicated intel_display_caps for display, with device info and
params. Intentionally prefix the file intel_ instead of i915_. Going
forward, we should do the same for all debugfs files, making them
independent of i915 and xe.
Remove display param dumping from i915 specific i915_capabilities
debugfs.
Note that we don't add node_to_intel_display() functionality in
to_intel_display(). It's too specific for that.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1b825b893dd2d423da167a7b6b21d05e8cd0182c.1726231866.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to the eDP spec, the source must first configure all
PSR related DPCD registers apart from the actual enable bit,
and only then set the enable bit. Split the current single DPCD
write to two to match the spec.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911151836.16800-1-ville.syrjala@linux.intel.com
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
In preparation of ultrajoiner, use number of joined pipes in the dsc
helpers to compute dsc slices and max compressed bpp, instead of using
the joiner flag.
v2: Adjust the formulae to use num of pipes as 1 (no joiner) or 2
(bigjoiner). (Ankit)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916102836.2149012-5-ankit.k.nautiyal@intel.com
In preparation of ultrajoiner, use number of pipes in the
intel_mode_valid_max_plane_size helper, instead of joiner flag.
v2: Use num_joined_pipes 1 where there are no joined pipes (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916102836.2149012-4-ankit.k.nautiyal@intel.com
In preparation of ultrajoiner, use number of joined pipes in the
intel_dp_joiner_needs_dsc helper, instead of joiner flag.
v2: Use intel_crtc_num_joined_pipes. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916102836.2149012-3-ankit.k.nautiyal@intel.com
Currently intel_joiner_num_pipes is used to get num of pipes wrt num of
pipes joined. Simplify this by returning 1 when no joiner is used and
update the checks for no joiner case.
v2: Rename the function to intel_crtc_num_joined_pipes and use helper
intel_crtc_joined_pipe_mask. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916102836.2149012-2-ankit.k.nautiyal@intel.com
There shouldn't be any path where the irq uninstall is called
twice nowadays. So, remove the FIXME commend and change
the check to a WARN.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916161937.537334-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
