The Kconfig logic for selecting the scheduler clocksource on
NXP Vybrid (VF610) uses a `choice` block restricted to 32-bit ARM. This
prevents 64-bit architectures, such as the NXP S32 family, from enabling
the NXP Periodic Interrupt Timer (PIT) driver (CONFIG_NXP_PIT_TIMER).
Relocate the NXP clocksource selection from arch/arm/mach-imx/Kconfig to
drivers/clocksource/Kconfig. This allows the configuration to be shared
across different architectures.
Update the selection to include support for ARCH_S32 and add a "None"
option restricted to ARCH_S32, since Vybrid lacks the ARM Architected
Timer. The Vybrid Global Timer option is restricted to ARCH_MULTI_V7
SOC_VF610 platforms to prevent it from being visible on Cortex-M4 builds,
which lack the ARM Global Timer hardware.
Fixes: bee33f22d7 ("clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support")
Signed-off-by: Enric Balletbo i Serra <eballetb@redhat.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260514-fix-nxp-timer-v3-1-a3e68fdb505e@redhat.com
Tegra SoCs supports multiple watchdog timers. If the kernel crashes or
hangs before userspace enables a watchdog, the system cannot recover and
may remain bricked, e.g. after a failed OTA update. The driver currently
leaves all watchdogs disabled until userspace configures them.
Reserve first available watchdog as a kernel-only watchdog for Tegra186
and Tegra234. Arm it during probe (120s timeout) and keep it alive in
the driver IRQ handler. Do not register it to userspace. Other available
watchdogs remain exposed to userspace. This guarantees the system can
reset itself in case of a hang or crash even when userspace never starts.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260507154557.2082697-5-kkartik@nvidia.com
Tegra186+ SoCs expose multiple watchdog timers, but the driver only
registers WDT(0).
Iterate over num_wdts and, for each WDT, check the SCR (firewall) registers
in the TKE block to determine whether Linux has read and write access.
Register the watchdogs that are accessible.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260507154557.2082697-4-kkartik@nvidia.com
On Tegra186 and Tegra234, WDT2 is connected to the Audio Processing
Engine (APE) and cannot be accessed from Linux. Only WDT0 and WDT1
are accessible to Linux.
Update num_wdts from 3 to 2 for both Tegra186 and Tegra234 to reflect
the actual number of watchdogs available to Linux.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260507154557.2082697-3-kkartik@nvidia.com
Tegra SoCs support multiple watchdogs; currently only one (WDT0) is
used. When multiple watchdogs are registered, tegra186_wdt_enable()
overwrites the TKEIE(x) register, discarding any existing watchdog
interrupt enable bits. As a result, enabling one watchdog inadvertently
disables interrupts for the others.
Fix this by preserving the existing TKEIE(x) value and updating it
using a read-modify-write sequence.
Fixes: 42cee19a9f ("clocksource: Add Tegra186 timers support")
Cc: stable@vger.kernel.org
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260507154557.2082697-2-kkartik@nvidia.com
Add support for using the TI Dual-Mode Timer for clockevents. The second
always on device with the "ti,timer-alwon" property is selected to be
used for clockevents. The first one is used as clocksource.
This allows clockevents to be setup independently of the CPU.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260508-topic-ti-dm-clkevt-v6-16-v5-3-61d546a0aff9@baylibre.com
Add support for using the TI Dual-Mode Timer as a clocksource. The
driver automatically picks the first timer that is marked as always-on
on with the "ti,timer-alwon" property to be the clocksource.
The timer can then be used for CPU independent time keeping.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260508-topic-ti-dm-clkevt-v6-16-v5-2-61d546a0aff9@baylibre.com
ti,always-on property doesn't exist. ti,timer-alwon is meant here. Fix
this minor bug in the comment.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://patch.msgid.link/20260508-topic-ti-dm-clkevt-v6-16-v5-1-61d546a0aff9@baylibre.com
The arm,arch_timer DT binding is extremely imprecise in describing
the requirements for interrupts.
Follow the architecture by making it explicit that:
- the EL1 secure timer irq is required if EL3 is implemented
- the EL1 physical timer irq is always required
- the EL1 virtual timer irq is always required
- the EL2 physical timer irq is required if EL2 is implemented
- the EL2 virtual timer irq is required if FEAT_VHE is implemented
The consequence of the above is that the minimum number of interrupts
to be described is 2, and not 1.
Finally, clean up the description which made the assumption that
the timers are plugged into a GIC (unfortunately, that's not always
true), drop the MMIO nonsense that has long be moved to a separate
binding, and use the architectural terminology to describe the various
interrupts.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260523140242.586031-5-maz@kernel.org
When running with at EL2 with VHE enabled, the architecture provides
two EL2 timer/counters, dubbed physical and virtual. Apart from their
names, they are strictly identical.
However, they don't get virtualised the same way, specially when
it comes to adding arbitrary offsets to the timers. When running as
a guest, the host CNTVOFF_EL2 does apply to the guest's view of
CNTHV*_El2. This is not true for CNTPOFF_EL2 and CNTHP*_EL2, as
the architecture is broken past the first level of virtualisation
(it lacks some essential mechanisms to be usable, despite what
the ARM ARM pretends).
This means that when running as a L2 guest hypervisor, using the
physical timer results in traps to L0, which are then forwarded to
L1 in order to emulate the offset, leading to even worse performance
due to massive trap amplification (the combination of register and
ERET trapping is absolutely lethal).
Switch the arch timer code to using the virtual timer when running
in VHE by default, only using the physical timer if the interrupt
is not correctly described in the firmware tables (which seems
to be an unfortunately common case). This comes as no impact on
bare-metal, and slightly improves the situation in the virtualised
case.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260523140242.586031-4-maz@kernel.org
Now that we have a way to identify GTDTv3, allow the information
related to the EL2 virtual timer to be retrieved by the interface
used by the architected timer driver.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20260523140242.586031-3-maz@kernel.org
Since ARMv8.1, the architecture has grown an EL2-private virtual
timer. This has been described in ACPI since ACPI v6.3 and revision
3 of the GTDT table.
An aditional structure was added in ACPICA, though in a rather
bizarre way, and merged in v5.1 as 8f5a14d053 ("ACPICA: ACPI 6.3:
add GTDT Revision 3 support").
Finally plug the table parsing in GTDT, and correct the parsing of
the platform timer subtables to account for the expanded size of
the base table. This also comes with some extra sanitisation of
the table, in the unlikely case someone got it wrong...
Suggested-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/20260523140242.586031-2-maz@kernel.org
D1 high speed timer differs from existing timer-sun5i by register base
offset.
Add sunxi quirks to handle D1 specific offset.
Add D1 compatible string to OF match table.
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260428-h616-t113s-hstimer-v3-2-7e02178a93ee@mmpsystems.pl
D1 is similar to existing sun5i, but with different register offsets.
H616 uses same offsets as D1.
Add allwinner,sun20i-d1-hstimer
Add allwinner,sun50i-h616-hstimer with fallback to
allwinner,sun20i-d1-hstimer
Extend schema condition for interrupts to cover D1 compatible variant.
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260428-h616-t113s-hstimer-v3-1-7e02178a93ee@mmpsystems.pl
Compared to the previously supported SoCs, the Renesas RZ/T2H and RZ/N2H
SoCs do not have a reset line.
Add support for them by moving the required reset into a conditional
matching all compatibles for the existing SoCs. Disable the resets for
RZ/T2H and RZ/N2H.
Document RZ/T2H and RZ/N2H, and use the generic compatible as a
fallback, as functionality is the same.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260410163530.383818-8-cosmin-gabriel.tanislav.xa@renesas.com
The TCIU8 interrupt used to be documented in earlier revisions of the
user manuals, but has since been removed. The corresponding entry is now
marked as reserved in the interrupt mapping tables of all supported
SoCs.
* Page 486, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2UL
Rev.1.40 User Manual
* Page 363, Table 8.2 Interrupt Mapping (6/13) in the Renesas RZ/Five
Rev.1.30 User Manual
* Page 528, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2L
and RZ/G2LC Rev.1.50 User Manual
* Page 540, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/V2L
Rev.1.50 User Manual
Remove the TCIU8 interrupt.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260410163530.383818-7-cosmin-gabriel.tanislav.xa@renesas.com
# New commits in timers/clocksource:
68ed094971 ("clocksource/drivers/timer-of: Make the code compatible with modules")
2423405880 ("clocksource/drivers/mmio: Make the code compatible with modules")
fed9f727cc ("clocksource/drivers/sun5i: Handle error returns from devm_reset_control_get_optional_exclusive()")
045a9dac7e ("clocksource/drivers/timer-rtl-otto: Make rttm_cs variable static")
b385caf918 ("dt-bindings: timer: fsl,imxgpt: add compatible string fsl,imx25-epit")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
# New commits in timers/urgent:
4096fd0e8e ("clockevents: Add missing resets of the next_event_forced flag")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaeSA8wAKCRDdBJ7gKXxA
jlKAAP4z9SQH3J71BVZK0pLi/9a/ISEZyJ9zIpsNi1sQ3shO/gD7BoUTQkepX5dk
dv1YBhroYz981dgIIV3kXpIAEYnoeQc=
=Os+z
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-04-19-00-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"7 hotfixes. 6 are cc:stable and all are for MM. Please see the
individual changelogs for details"
* tag 'mm-hotfixes-stable-2026-04-19-00-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/core: disallow non-power of two min_region_sz on damon_start()
mm/vmalloc: take vmap_purge_lock in shrinker
mm: call ->free_folio() directly in folio_unmap_invalidate()
mm: blk-cgroup: fix use-after-free in cgwb_release_workfn()
mm/zone_device: do not touch device folio after calling ->folio_free()
mm/damon/core: disallow time-quota setting zero esz
mm/mempolicy: fix weighted interleave auto sysfs name
- Prevent a device from being probed before device_add() has finished
initializing it; gate probe with a "ready_to_probe" device flag to
avoid races with concurrent driver_register() calls
- Fix a kernel-doc warning for DEV_FLAG_COUNT introduced by the above
- Return -ENOTCONN from software_node_get_reference_args() when a
referenced software node is known but not yet registered, allowing
callers to defer probe
- In sysfs_group_attrs_change_owner(), also check is_visible_const();
missed when the const variant was introduced
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaePuOwAKCRBFlHeO1qrK
LrBdAP9hcc5TBpPgbW4vdpsGgPhspz2x3Ijq0m91354RT2KISwEAx0ZHu6pvtLb/
hW0hHvk0onL6uBbCR6629U+A/xQ79go=
=Hdaa
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Prevent a device from being probed before device_add() has finished
initializing it; gate probe with a "ready_to_probe" device flag to
avoid races with concurrent driver_register() calls
- Fix a kernel-doc warning for DEV_FLAG_COUNT introduced by the above
- Return -ENOTCONN from software_node_get_reference_args() when a
referenced software node is known but not yet registered, allowing
callers to defer probe
- In sysfs_group_attrs_change_owner(), also check is_visible_const();
missed when the const variant was introduced
* tag 'driver-core-7.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: Add kernel-doc for DEV_FLAG_COUNT enum value
sysfs: attribute_group: Respect is_visible_const() when changing owner
software node: return -ENOTCONN when referenced swnode is not registered yet
driver core: Don't let a device probe until it's ready
Here is the "big" set of staging driver changes for 7.1-rc1.
Nothing major in here at all, just lots of little cleanups for the
staging drivers, driven by new developers getting their feet wet in
kernel development. "Largest" thing in here is the change of some of
the octeon variable types into proper kernel ones.
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeSwQw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn5CACeOUA5iM3jzCYLcTzNZCWxtJNndmEAoLmP6DeO
1gDkw56spKf7LIpi75vJ
=8gS1
-----END PGP SIGNATURE-----
Merge tag 'staging-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the "big" set of staging driver changes for 7.1-rc1.
Nothing major in here at all, just lots of little cleanups for the
staging drivers, driven by new developers getting their feet wet in
kernel development. "Largest" thing in here is the change of some of
the octeon variable types into proper kernel ones.
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (154 commits)
staging: rtl8723bs: remove redundant & parentheses
staging: most: dim2: replace BUG_ON() in poison_channel()
staging: most: dim2: replace BUG_ON() in enqueue()
staging: most: dim2: replace BUG_ON() in configure_channel()
staging: most: dim2: replace BUG_ON() in service_done_flag()
staging: most: dim2: replace BUG_ON() in try_start_dim_transfer()
staging: rtl8723bs: remove unused RTL8188E antenna selection macros
staging: rtl8723bs: remove redundant blank lines in basic_types.h
staging: rtl8723bs: wrap complex macros with parentheses
staging: rtl8723bs: remove unused WRITEEF/READEF byte macros
staging: rtl8723bs: rename camelCase variable
staging: greybus: audio: fix error message for BTN_3 button
staging: rtl8723bs: rename variables to snake_case
staging: rtl8723bs: fix spelling in comment
staging: rtl8723bs: cleanup return in sdio_init()
staging: rtl8723bs: use direct returns in sdio_dvobj_init()
staging: rtl8723bs: remove unused arg at odm_interface.h
greybus: raw: fix use-after-free if write is called after disconnect
greybus: raw: fix use-after-free on cdev close
staging: rtl8723bs: fix logical continuations in xmit_linux.c
...
Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support (will cause merge conflicts in
drivers/power/supply/Makefile, but it's a simple fix) These changes
did touch outside of drivers/usb/ but got acks from the relevant
mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeSx6g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynqjQCgqhbj0Pg2DiL+hZ4xEVlsKD8MJsMAn0vbdsR5
UiYztWABA245P1hO9i+K
=/fxh
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
Here is the set of tty and serial driver changes for 7.1-rc1.
Not much here this cycle, biggest thing is the removal of an old driver
that never got any actual hardware support (esp32), and the second try
to moving the tty ports to their own workqueues (first try was in
7.0-rc1 but was reverted due to problems.)
Otherwise it's just a small set of driver updates and some vt modifier
key enhancements.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeTdzg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymr3gCeKwRtlyy5LOFs/vikB47gf/aBb1MAoIv4JBDo
xWvKMVFvMD7XfsJkPHyR
=l37E
-----END PGP SIGNATURE-----
Merge tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the set of tty and serial driver changes for 7.1-rc1.
Not much here this cycle, biggest thing is the removal of an old
driver that never got any actual hardware support (esp32), and the
second try to moving the tty ports to their own workqueues (first try
was in 7.0-rc1 but was reverted due to problems)
Otherwise it's just a small set of driver updates and some vt modifier
key enhancements.
All have been in linux-next for a while with no reported issues"
* tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (35 commits)
tty: serial: ip22zilog: Fix section mispatch warning
hvc/xen: Check console connection flag
serial: sh-sci: Add support for RZ/G3L RSCI
dt-bindings: serial: renesas,rsci: Document RZ/G3L SoC
tty: atmel_serial: update outdated reference to atmel_tasklet_func()
serial: xilinx_uartps: Drop unused include
serial: qcom-geni: drop stray newline format specifier
serial: 8250: loongson: Enable building on MIPS Loongson64
dt-bindings: serial: 8250: Add Loongson 3A4000 uart compatible
serial: 8250_fintek: Add support for F81214E
tty: tty_port: add workqueue to flip TTY buffer
vt: support ITU-T T.416 color subparameters
serial: qcom-geni: Fix RTS behavior with flow control
tty: serial: imx: keep dma request disabled before dma transfer setup
tty: serial: 8250: Add SystemBase Multi I/O cards
serial: pic32_uart: allow driver to be compiled on all architectures with COMPILE_TEST
serial: tegra: remove Kconfig dependency on APB DMA controller
dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9
dt-bindings: serial: atmel,at91-usart: add microchip,lan9691-usart
serial: auart: check clk_enable() return in console write
...
Everything:
Total patches: 121
Reviews/patch: 2.11
Reviewed rate: 90%
Excluding DAMON:
Total patches: 113
Reviews/patch: 2.25
Reviewed rate: 96%
- The 33 patch series "Eliminate Dying Memory Cgroup" from Qi Zheng and
Muchun Song addresses the longstanding "dying memcg problem". A
situation wherein a no-longer-used memory control group will hang around
for an extended period pointlessly consuming memory. The [0/N]
changelog has a good overview of this work.
- The 3 patch series "fix unexpected type conversions and potential
overflows" from Qi Zheng fixes a couple of potential 32-bit/64-bit
issues which were identified during review of the "Eliminate Dying
Memory Cgroup" series.
- The 6 patch series "kho: history: track previous kernel version and
kexec boot count" from Breno Leitao uses Kexec Handover (KHO) to pass
the previous kernel's version string and the number of kexec reboots
since the last cold boot to the next kernel, and prints it at boot time.
- The 4 patch series "liveupdate: prevent double preservation" from
Pasha Tatashin teaches LUO to avoid managing the same file across
different active sessions.
- The 10 patch series "liveupdate: Fix module unloading and unregister
API" from Pasha Tatashin addresses an issue with how LUO handles module
reference counting and unregistration during module unloading.
- The 2 patch series "zswap pool per-CPU acomp_ctx simplifications" from
Kanchana Sridhar simplifies and cleans up the zswap crypto compression
handling and improves the lifecycle management of zswap pool's per-CPU
acomp_ctx resources.
- The 2 patch series "mm/damon/core: fix damon_call()/damos_walk() vs
kdmond exit race" from SeongJae Park addresses unlikely but possible
leaks and deadlocks in damon_call() and damon_walk().
- The 2 patch series "mm/damon/core: validate damos_quota_goal->nid"
from SeongJae Park fixes a couple of root-only wild pointer
dereferences.
- The 2 patch series "Docs/admin-guide/mm/damon: warn commit_inputs vs
other params race" from SeongJae Park updates the DAMON documentation to
warn operators about potential races which can occur if the
commit_inputs parameter is altered at the wrong time.
- The 3 patch series "Minor hmm_test fixes and cleanups" from Alistair
Popple implements two bugfixes a cleanup for the HMM kernel selftests.
- The 6 patch series "Modify memfd_luo code" from Chenghao Duan provides
cleanups, simplifications and speedups in the memfd_lou code.
- The 4 patch series "mm, kvm: allow uffd support in guest_memfd" from
Mike Rapoport enables support for userfaultfd in guest_memfd.
- The 6 patch series "selftests/mm: skip several tests when thp is not
available" from Chunyu Hu fixes several issues in the selftests code
which were causing breakage when the tests were run on CONFIG_THP=n
kernels.
- The 2 patch series "mm/mprotect: micro-optimization work" from Pedro
Falcato implements a couple of nice speedups for mprotect().
- The 3 patch series "MAINTAINERS: update KHO and LIVE UPDATE entries"
from Pratyush Yadav reflects upcoming changes in the maintenance of KHO,
LUO, memfd_luo, kexec, crash, kdump and probably other kexec-based
things - they are being moved out of mm.git and into a new git tree.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaeNL/wAKCRDdBJ7gKXxA
jt7EAQCEEQvYYTjld+8HJKsCbavY4pEfci7z4SBiQyIPjRracQD/ZfjXnzL7ucc1
b6q6G4TcslvIDBgzVkk9G2BVn2oCoAg=
=3ozv
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-04-18-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "Eliminate Dying Memory Cgroup" (Qi Zheng and Muchun Song)
Address the longstanding "dying memcg problem". A situation wherein a
no-longer-used memory control group will hang around for an extended
period pointlessly consuming memory
- "fix unexpected type conversions and potential overflows" (Qi Zheng)
Fix a couple of potential 32-bit/64-bit issues which were identified
during review of the "Eliminate Dying Memory Cgroup" series
- "kho: history: track previous kernel version and kexec boot count"
(Breno Leitao)
Use Kexec Handover (KHO) to pass the previous kernel's version string
and the number of kexec reboots since the last cold boot to the next
kernel, and print it at boot time
- "liveupdate: prevent double preservation" (Pasha Tatashin)
Teach LUO to avoid managing the same file across different active
sessions
- "liveupdate: Fix module unloading and unregister API" (Pasha
Tatashin)
Address an issue with how LUO handles module reference counting and
unregistration during module unloading
- "zswap pool per-CPU acomp_ctx simplifications" (Kanchana Sridhar)
Simplify and clean up the zswap crypto compression handling and
improve the lifecycle management of zswap pool's per-CPU acomp_ctx
resources
- "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race"
(SeongJae Park)
Address unlikely but possible leaks and deadlocks in damon_call() and
damon_walk()
- "mm/damon/core: validate damos_quota_goal->nid" (SeongJae Park)
Fix a couple of root-only wild pointer dereferences
- "Docs/admin-guide/mm/damon: warn commit_inputs vs other params race"
(SeongJae Park)
Update the DAMON documentation to warn operators about potential
races which can occur if the commit_inputs parameter is altered at
the wrong time
- "Minor hmm_test fixes and cleanups" (Alistair Popple)
Bugfixes and a cleanup for the HMM kernel selftests
- "Modify memfd_luo code" (Chenghao Duan)
Cleanups, simplifications and speedups to the memfd_lou code
- "mm, kvm: allow uffd support in guest_memfd" (Mike Rapoport)
Support for userfaultfd in guest_memfd
- "selftests/mm: skip several tests when thp is not available" (Chunyu
Hu)
Fix several issues in the selftests code which were causing breakage
when the tests were run on CONFIG_THP=n kernels
- "mm/mprotect: micro-optimization work" (Pedro Falcato)
A couple of nice speedups for mprotect()
- "MAINTAINERS: update KHO and LIVE UPDATE entries" (Pratyush Yadav)
Document upcoming changes in the maintenance of KHO, LUO, memfd_luo,
kexec, crash, kdump and probably other kexec-based things - they are
being moved out of mm.git and into a new git tree
* tag 'mm-stable-2026-04-18-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (121 commits)
MAINTAINERS: add page cache reviewer
mm/vmscan: avoid false-positive -Wuninitialized warning
MAINTAINERS: update Dave's kdump reviewer email address
MAINTAINERS: drop include/linux/liveupdate from LIVE UPDATE
MAINTAINERS: drop include/linux/kho/abi/ from KHO
MAINTAINERS: update KHO and LIVE UPDATE maintainers
MAINTAINERS: update kexec/kdump maintainers entries
mm/migrate_device: remove dead migration entry check in migrate_vma_collect_huge_pmd()
selftests: mm: skip charge_reserved_hugetlb without killall
userfaultfd: allow registration of ranges below mmap_min_addr
mm/vmstat: fix vmstat_shepherd double-scheduling vmstat_update
mm/hugetlb: fix early boot crash on parameters without '=' separator
zram: reject unrecognized type= values in recompress_store()
docs: proc: document ProtectionKey in smaps
mm/mprotect: special-case small folios when applying permissions
mm/mprotect: move softleaf code out of the main function
mm: remove '!root_reclaim' checking in should_abort_scan()
mm/sparse: fix comment for section map alignment
mm/page_io: use sio->len for PSWPIN accounting in sio_read_complete()
selftests/mm: transhuge_stress: skip the test when thp not available
...
Commit d8f867fa08 ("mm/damon: add damon_ctx->min_sz_region") introduced
a bug that allows unaligned DAMON region address ranges. Commit
c80f46ac22 ("mm/damon/core: disallow non-power of two min_region_sz")
fixed it, but only for damon_commit_ctx() use case. Still, DAMON sysfs
interface can emit non-power of two min_region_sz via damon_start(). Fix
the path by adding the is_power_of_2() check on damon_start().
The issue was discovered by sashiko [1].
Link: https://lore.kernel.org/20260411213638.77768-1-sj@kernel.org
Link: https://lore.kernel.org/20260403155530.64647-1-sj@kernel.org [1]
Fixes: d8f867fa08 ("mm/damon: add damon_ctx->min_sz_region")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
decay_va_pool_node() can be invoked concurrently from two paths:
__purge_vmap_area_lazy() when pools are being purged, and the shrinker via
vmap_node_shrink_scan().
However, decay_va_pool_node() is not safe to run concurrently, and the
shrinker path currently lacks serialization, leading to races and possible
leaks.
Protect decay_va_pool_node() by taking vmap_purge_lock in the shrinker
path to ensure serialization with purge users.
Link: https://lore.kernel.org/20260413192646.14683-1-urezki@gmail.com
Fixes: 7679ba6b36 ("mm: vmalloc: add a shrinker to drain vmap pools")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <baoquan.he@linux.dev>
Cc: chenyichong <chenyichong@uniontech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We can only call filemap_free_folio() if we have a reference to (or hold a
lock on) the mapping. Otherwise, we've already removed the folio from the
mapping so it no longer pins the mapping and the mapping can be removed,
causing a use-after-free when accessing mapping->a_ops.
Follow the same pattern as __remove_mapping() and load the free_folio
function pointer before dropping the lock on the mapping. That lets us
make filemap_free_folio() static as this was the only caller outside
filemap.c.
Link: https://lore.kernel.org/20260413184314.3419945-1-willy@infradead.org
Fixes: fb7d3bc414 ("mm/filemap: drop streaming/uncached pages when writeback completes")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Google Big Sleep <big-sleep-vuln-reports+bigsleep-501448199@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses
wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last
reference, the blkcg can be freed asynchronously (css_free_rwork_fn ->
blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the
pointer to access blkcg->online_pin, resulting in a use-after-free:
BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367)
Write of size 4 at addr ff11000117aa6160 by task kworker/71:1/531
Workqueue: cgwb_release cgwb_release_workfn
Call Trace:
<TASK>
blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367)
cgwb_release_workfn (mm/backing-dev.c:629)
process_scheduled_works (kernel/workqueue.c:3278 kernel/workqueue.c:3385)
Freed by task 1016:
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6246 mm/slub.c:6561)
css_free_rwork_fn (kernel/cgroup/cgroup.c:5542)
process_scheduled_works (kernel/workqueue.c:3302 kernel/workqueue.c:3385)
** Stack based on commit 66672af7a095 ("Add linux-next specific files
for 20260410")
I am seeing this crash sporadically in Meta fleet across multiple kernel
versions. A full reproducer is available at:
https://github.com/leitao/debug/blob/main/reproducers/repro_blkcg_uaf.sh
(The race window is narrow. To make it easily reproducible, inject a
msleep(100) between css_put() and blkcg_unpin_online() in
cgwb_release_workfn(). With that delay and a KASAN-enabled kernel, the
reproducer triggers the splat reliably in less than a second.)
Fix this by moving blkcg_unpin_online() before css_put(), so the
cgwb's CSS reference keeps the blkcg alive while blkcg_unpin_online()
accesses it.
Link: https://lore.kernel.org/20260413-blkcg-v1-1-35b72622d16c@debian.org
Fixes: 59b57717ff ("blkcg: delay blkg destruction until after writeback has finished")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: JP Kobryn <inwardvessel@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The contents of a device folio can immediately change after calling
->folio_free(), as the folio may be reallocated by a driver with a
different order. Instead of touching the folio again to extract the
pgmap, use the local stack variable when calling percpu_ref_put_many().
Link: https://lore.kernel.org/20260410230346.4009855-1-matthew.brost@intel.com
Fixes: d245f9b4ab ("mm/zone_device: support large zone device private folios")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Reviewed-by: Vishal Moola <vishal.moola@gmail.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the throughput of a DAMOS scheme is very slow, DAMOS time quota can
make the effective size quota smaller than damon_ctx->min_region_sz. In
the case, damos_apply_scheme() will skip applying the action, because the
action is tried at region level, which requires >=min_region_sz size.
That is, the quota is effectively exceeded for the quota charge window.
Because no action will be applied, the total_charged_sz and
total_charged_ns are also not updated. damos_set_effective_quota() will
try to update the effective size quota before starting the next charge
window. However, because the total_charged_sz and total_charged_ns have
not updated, the throughput and effective size quota are also not changed.
Since effective size quota can only be decreased, other effective size
quota update factors including DAMOS quota goals and size quota cannot
make any change, either.
As a result, the scheme is unexpectedly deactivated until the user notices
and mitigates the situation. The users can mitigate this situation by
changing the time quota online or re-install the scheme. While the
mitigation is somewhat straightforward, finding the situation would be
challenging, because DAMON is not providing good observabilities for that.
Even if such observability is provided, doing the additional monitoring
and the mitigation is somewhat cumbersome and not aligned to the intention
of the time quota. The time quota was intended to help reduce the user's
administration overhead.
Fix the problem by setting time quota-modified effective size quota be at
least min_region_sz always.
The issue was discovered [1] by sashiko.
Link: https://lore.kernel.org/20260407003153.79589-1-sj@kernel.org
Link: https://lore.kernel.org/20260405192504.110014-1-sj@kernel.org [1]
Fixes: 1cd2430300 ("mm/damon/schemes: implement time quota")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The __ATTR macro is a utility that makes defining kobj_attributes easier
by stringfying the name, verifying the mode, and setting the show/store
fields in a single initializer. It takes a raw token as the first value,
rather than a string, so that __ATTR family macros like __ATTR_RW can
token-paste it for inferring the _show / _store function names.
Commit e341f9c3c8 ("mm/mempolicy: Weighted Interleave Auto-tuning") used
the __ATTR macro to define the "auto" sysfs for weighted interleave. A
few months later, commit 2fb6915fa2 ("compiler_types.h: add "auto" as a
macro for "__auto_type"") introduced a #define macro which expanded auto
into __auto_type.
This led to the "auto" token passed into __ATTR to be expanded out into
__auto_type, and the sysfs entry to be displayed as __auto_type as well.
Expand out the __ATTR macro and directly pass a string "auto" instead of
the raw token 'auto' to prevent it from being expanded out. Also bypass
the VERIFY_OCTAL_PERMISSIONS check by triple checking that 0664 is indeed
the intended permissions for this sysfs file.
Before:
$ ls /sys/kernel/mm/mempolicy/weighted_interleave
__auto_type node0
After:
$ ls /sys/kernel/mm/mempolicy/weighted_interleave/
auto node0
Link: https://lore.kernel.org/20260407141415.3080960-1-joshua.hahnjy@gmail.com
Fixes: 2fb6915fa2 ("compiler_types.h: add "auto" as a macro for "__auto_type"")
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Rakie Kim <rakie.kim@sk.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Core changes:
- Perform basic checks on pin config properties so as not to
allow directly contradictory settings such as setting a pin
to more than one bias or drive mode.
- Handle input-threshold-voltage-microvolt property.
- Introduce pinctrl_gpio_get_config() handling in the core for
SCMI GPIO using pin control.
New drivers:
- GPIO-by-pin control driver (also apperaing in the GPIO pull
request) fulfilling a promise on a comment from
Grant Likely many years ago: "can't GPIO just be a front-end
for pin control?" it turns out it can, if and only if you
design something new from scratch, such as SCMI.
- Broadcom BCM7038 as a pinctrl-single delegate.
- Mobileye EyeQ6Lplus OLB pin controller.
- Qualcomm Eliza and Hawi families TLMM pin controllers.
- Qualcomm SDM670 and Milos family LPASS LPI pin controllers.
- Qualcomm IPQ5210 pin controller.
- Realtek RTD1625 pin controller support.
- Rockchip RV1103B pin controller support.
- Texas Instruments AM62L as a pinctrl-single delegate.
Improvements:
- Set config implementation for the Spacemit K1 pin controller.
-----BEGIN PGP SIGNATURE-----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=mkXM
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Perform basic checks on pin config properties so as not to allow
directly contradictory settings such as setting a pin to more than
one bias or drive mode
- Handle input-threshold-voltage-microvolt property
- Introduce pinctrl_gpio_get_config() handling in the core for SCMI
GPIO using pin control
New drivers:
- GPIO-by-pin control driver (also appearing in the GPIO pull
request) fulfilling a promise on a comment from Grant Likely many
years ago: "can't GPIO just be a front-end for pin control?" it
turns out it can, if and only if you design something new from
scratch, such as SCMI
- Broadcom BCM7038 as a pinctrl-single delegate
- Mobileye EyeQ6Lplus OLB pin controller
- Qualcomm Eliza and Hawi families TLMM pin controllers
- Qualcomm SDM670 and Milos family LPASS LPI pin controllers
- Qualcomm IPQ5210 pin controller
- Realtek RTD1625 pin controller support
- Rockchip RV1103B pin controller support
- Texas Instruments AM62L as a pinctrl-single delegate
Improvements:
- Set config implementation for the Spacemit K1 pin controller"
* tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (84 commits)
pinctrl: qcom: Add Hawi pinctrl driver
dt-bindings: pinctrl: qcom: Describe Hawi TLMM block
dt-bindings: pinctrl: pinctrl-max77620: convert to DT schema
pinctrl: single: Add bcm7038-padconf compatible matching
dt-bindings: pinctrl: pinctrl-single: Add brcm,bcm7038-padconf
dt-bindings: pinctrl: apple,pinctrl: Add t8122 compatible
pinctrl: qcom: sdm670-lpass-lpi: label variables as static
pinctrl: sophgo: pinctrl-sg2044: Fix wrong module description
pinctrl: sophgo: pinctrl-sg2042: Fix wrong module description
pinctrl: qcom: add sdm670 lpi tlmm
dt-bindings: pinctrl: qcom: Add SDM670 LPASS LPI pinctrl
dt-bindings: qcom: lpass-lpi-common: add reserved GPIOs property
pinctrl: qcom: Introduce IPQ5210 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5210 pinctrl
pinctrl: qcom: Drop redundant intr_target_reg on modern SoCs
pinctrl: qcom: eliza: Fix interrupt target bit
pinctrl: core: Don't use "proxy" headers
pinctrl: amd: Support new ACPI ID AMDI0033
pinctrl: renesas: rzg2l: Drop superfluous blank line
pinctrl: renesas: rzg2l: Fix save/restore of {IOLH,IEN,PUPD,SMT} registers
...
- A fix to make modules on 32-bit parisc architecture work again
- Drop ip_fast_csum() inline assembly to avoid unaligned memory accesses
- Allow to build kernel without 32-bit VDSO
- Reference leak fix in error path in LED driver
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaeOk+QAKCRD3ErUQojoP
X6fjAQD0DK47ZT3fuUGVH0T1mg6kZ2a7fSrNkjbGW+B87jlZVQD/ez6eLdZ7+B4f
k+sQ9Y0e18Ypgi1uvtNFe1lzX25jrQg=
=GnPk
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- A fix to make modules on 32-bit parisc architecture work again
- Drop ip_fast_csum() inline assembly to avoid unaligned memory
accesses
- Allow to build kernel without 32-bit VDSO
- Reference leak fix in error path in LED driver
* tag 'parisc-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: led: fix reference leak on failed device registration
module.lds.S: Fix modules on 32-bit parisc architecture
parisc: Allow to build without VDSO32
parisc: Include 32-bit VDSO only when building for 32-bit or compat mode
parisc: Allow to disable COMPAT mode on 64-bit kernel
parisc: Fix default stack size when COMPAT=n
parisc: Fix signal code to depend on CONFIG_COMPAT instead of CONFIG_64BIT
parisc: is_compat_task() shall return false for COMPAT=n
parisc: Avoid compat syscalls when COMPAT=n
parisc: _llseek syscall is only available for 32-bit userspace
parisc: Drop ip_fast_csum() inline assembly implementation
parisc: update outdated comments for renamed ccio_alloc_consistent()
* improve debugability of reserve_mem kernel parameter handling with print
outs in case of a failure and debugfs info showing what was actually
reserved
* Make memblock_free_late() and free_reserved_area() use the same core
logic for freeing the memory to buddy and ensure it takes care of
updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmnjRmsQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kYh0CAC4NpZGFqpEBep1eQcfqsPH05dvp1LUXDNk
i5GwS2ht/F5D9GcD+EyoYRQjRM8k+XZyOe3sqEF01Uav/rHAv3XrITg/pfiA92AR
K7CvQv4NvyQqUNcv/mEb+P8niriJ4oHRXCag9inop1jo/x3Mym07oEy73rknAx9r
ZQKwoFNOM/QQGVb9hZUANKCkE8cAsUXG89yEOH0n17FOahC0PZbK/vxjeO+br3IL
HxEoC5l1j4cUauf8XEhsVXXdch0iqit/fB3ROePYFNCx7koVYHk6Yl1w++AM0RUA
ypOmfPsSiqLY2ciuTIAnpTeMfQkkhEmMI3mp6T5BUBwSKJxLRaSM
=c1xd
-----END PGP SIGNATURE-----
Merge tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- improve debuggability of reserve_mem kernel parameter handling with
print outs in case of a failure and debugfs info showing what was
actually reserved
- Make memblock_free_late() and free_reserved_area() use the same core
logic for freeing the memory to buddy and ensure it takes care of
updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.
* tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/alternative: delay freeing of smp_locks section
memblock: warn when freeing reserved memory before memory map is initialized
memblock, treewide: make memblock_free() handle late freeing
memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y
memblock: extract page freeing from free_reserved_area() into a helper
memblock: make free_reserved_area() more robust
mm: move free_reserved_area() to mm/memblock.c
powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact()
powerpc: fadump: pair alloc_pages_exact() with free_pages_exact()
memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name()
memblock: move reserve_bootmem_range() to memblock.c and make it static
memblock: Add reserve_mem debugfs info
memblock: Print out errors on reserve_mem parser
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
- various minor improvements in other drivers
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support
-----BEGIN PGP SIGNATURE-----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=G0Mn
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.1-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"The biggest news in this pull request is that it will start the last
cycle of me handling the I2C subsystem. From 7.2. on, I will pass
maintainership to Andi Shyti who has been maintaining the I2C drivers
for a while now and who has done a great job in doing so.
We will use this cycle for a hopefully smooth transition. Thanks must
go to Andi for stepping up! I will still be around for guidance.
Updates:
- generic cleanups in npcm7xx, qcom-cci, xiic and designware DT
bindings
- atr: use kzalloc_flex for alias pool allocation
- ixp4xx: convert bindings to DT schema
- ocores: use read_poll_timeout_atomic() for polling waits
- qcom-geni: skip extra TX DMA TRE for single read messages
- s3c24xx: validate SMBus block length before using it
- spacemit: refactor xfer path and add K1 PIO support
- tegra: identify DVC and VI with SoC data variants
- tegra: support SoC-specific register offsets
- xiic: switch to devres and generic fw properties
- xiic: skip input clock setup on non-OF systems
- various minor improvements in other drivers
rtl9300:
- add per-SoC callbacks and clock support for RTL9607C
- add support for new 50 kHz and 2.5 MHz bus speeds
- general refactoring in preparation for RTL9607C support
New support:
- DesignWare GOOG5000 (ACPI HID)
- Intel Nova Lake (ACPI ID)
- Realtek RTL9607C
- SpacemiT K3 binding
- Tegra410 register layout support"
* tag 'i2c-for-7.1-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (40 commits)
i2c: usbio: Add ACPI device-id for NVL platforms
i2c: qcom-geni: Avoid extra TX DMA TRE for single read message in GPI mode
i2c: atr: use kzalloc_flex
i2c: spacemit: introduce pio for k1
i2c: spacemit: move i2c_xfer_msg()
i2c: xiic: skip input clock setup on non-OF systems
i2c: xiic: use numbered adapter registration
i2c: xiic: cosmetic: use resource format specifier in debug log
i2c: xiic: cosmetic cleanup
i2c: xiic: switch to generic device property accessors
i2c: xiic: remove duplicate error message
i2c: xiic: switch to devres managed APIs
i2c: rtl9300: add RTL9607C i2c controller support
i2c: rtl9300: introduce new function properties to driver data
i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C support
i2c: rtl9300: introduce a property for 8 bit width reg address
i2c: rtl9300: introduce F_BUSY to the reg_fields struct
i2c: rtl9300: introduce max length property to driver data
i2c: rtl9300: split data_reg into read and write reg
...
Mostly fixes to the BMC software.
Fix one issue in the host side driver where a kthread can be left
running on a specific memory allocation failre at probe time.
Replace system_wq with system_percpu_wq so system_wq can eventually go
away.
-----BEGIN PGP SIGNATURE-----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=549p
-----END PGP SIGNATURE-----
Merge tag 'for-linus-7.1-1' of https://github.com/cminyard/linux-ipmi
Pull ipmi updates from Corey Minyard:
"Small updates and fixes (mostly to the BMC software):
- Fix one issue in the host side driver where a kthread can be left
running on a specific memory allocation failre at probe time
- Replace system_wq with system_percpu_wq so system_wq can eventually
go away"
* tag 'for-linus-7.1-1' of https://github.com/cminyard/linux-ipmi:
ipmi:ssif: Clean up kthread on errors
ipmi:ssif: Remove unnecessary indention
ipmi: ssif_bmc: Fix KUnit test link failure when KUNIT=m
ipmi: ssif_bmc: add unit test for state machine
ipmi: ssif_bmc: change log level to dbg in irq callback
ipmi: ssif_bmc: fix message desynchronization after truncated response
ipmi: ssif_bmc: fix missing check for copy_to_user() partial failure
ipmi: ssif_bmc: cancel response timer on remove
ipmi: Replace use of system_wq with system_percpu_wq
perf report:
- Add 'comm_nodigit' sort key to combine similar threads that only have
different numbers in the comm. In the following example, the
'comm_nodigit' will have samples from all threads starting with
"bpfrb/" into an entry "bpfrb/<N>".
$ perf report -s comm_nodigit,comm -H
...
#
# Overhead CommandNoDigit / Command
# ........... ........................
#
20.30% swapper
20.30% swapper
13.37% chrome
13.37% chrome
10.07% bpfrb/<N>
7.47% bpfrb/0
0.70% bpfrb/1
0.47% bpfrb/3
0.46% bpfrb/2
0.25% bpfrb/4
0.23% bpfrb/5
0.20% bpfrb/6
0.14% bpfrb/10
0.07% bpfrb/7
- Support flat layout for symfs. The --symfs option is to specify the
location of debugging symbol files. The default 'hierarchy' layout
would search the symbol file using the same path of the original file
under the symfs root. The new 'flat' layout would search only in the
root directory.
- Update 'simd' sort key for ARM SIMD flags to cover ASE/SME and more
predicate flags.
perf stat:
- Add --pmu-filter option to select specific PMUs. This would be
useful when you measure metrics from multiple instance of uncore PMUs
with similar names.
# perf stat -M cpa_p0_avg_bw
Performance counter stats for 'system wide':
19,417,779,115 hisi_sicl0_cpa0/cpa_cycles/ # 0.00 cpa_p0_avg_bw
0 hisi_sicl0_cpa0/cpa_p0_wr_dat/
0 hisi_sicl0_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl0_cpa0/cpa_p0_rd_dat_32b/
19,417,751,103 hisi_sicl10_cpa0/cpa_cycles/ # 0.00 cpa_p0_avg_bw
0 hisi_sicl10_cpa0/cpa_p0_wr_dat/
0 hisi_sicl10_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl10_cpa0/cpa_p0_rd_dat_32b/
19,417,730,679 hisi_sicl2_cpa0/cpa_cycles/ # 0.31 cpa_p0_avg_bw
75,635,749 hisi_sicl2_cpa0/cpa_p0_wr_dat/
18,520,640 hisi_sicl2_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl2_cpa0/cpa_p0_rd_dat_32b/
19,417,674,227 hisi_sicl8_cpa0/cpa_cycles/ # 0.00 cpa_p0_avg_bw
0 hisi_sicl8_cpa0/cpa_p0_wr_dat/
0 hisi_sicl8_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl8_cpa0/cpa_p0_rd_dat_32b/
19.417734480 seconds time elapsed
With --pmu-filter, users can select only hisi_sicl2_cpa0 PMU.
# perf stat --pmu-filter hisi_sicl2_cpa0 -M cpa_p0_avg_bw
Performance counter stats for 'system wide':
6,234,093,559 cpa_cycles # 0.60 cpa_p0_avg_bw
50,548,465 cpa_p0_wr_dat
7,552,182 cpa_p0_rd_dat_64b
0 cpa_p0_rd_dat_32b
6.234139320 seconds time elapsed
Data type profiling:
- Quality improvements by tracking register state more precisely.
- Ensure array members to get the type.
- Handle more cases for global variables.
Vendor event/metric updates:
- Update various Intel events and metrics
- Add NVIDIA Tegra 410 Olympus events
Internal changes:
- Verify perf.data header for maliciously crafted files.
- Update perf test to cover more usages and make them robust.
- Move a couple of copied kernel headers not to annoy objtool build.
- Fix a bug in map sorting in name order.
- Remove some unused codes.
Misc:
- Fix module symbol resolution with non-zero text address.
- Add -t/--threads option to `perf bench mem mmap`.
- Track duration of exit*() syscall by `perf trace -s`.
- Add core.addr2line-timeout and core.addr2line-disable-warn config
items.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaeKePAAKCRCMstVUGiXM
g5HiAQD7V4hiNd1atnY2slRfvkqSV7wlrXjYEQj01Ht0eJxJwAEA+3991R+6+RTZ
9AbC0LvjBgKhnRDR1/DE+GkXUmQZnwA=
=rlNN
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v7.1-2026-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf report:
- Add 'comm_nodigit' sort key to combine similar threads that only
have different numbers in the comm. In the following example, the
'comm_nodigit' will have samples from all threads starting with
"bpfrb/" into an entry "bpfrb/<N>".
$ perf report -s comm_nodigit,comm -H
...
#
# Overhead CommandNoDigit / Command
# ........... ........................
#
20.30% swapper
20.30% swapper
13.37% chrome
13.37% chrome
10.07% bpfrb/<N>
7.47% bpfrb/0
0.70% bpfrb/1
0.47% bpfrb/3
0.46% bpfrb/2
0.25% bpfrb/4
0.23% bpfrb/5
0.20% bpfrb/6
0.14% bpfrb/10
0.07% bpfrb/7
- Support flat layout for symfs. The --symfs option is to specify the
location of debugging symbol files. The default 'hierarchy' layout
would search the symbol file using the same path of the original
file under the symfs root. The new 'flat' layout would search only
in the root directory.
- Update 'simd' sort key for ARM SIMD flags to cover ASE/SME and more
predicate flags.
perf stat:
- Add --pmu-filter option to select specific PMUs. This would be
useful when you measure metrics from multiple instance of uncore
PMUs with similar names.
# perf stat -M cpa_p0_avg_bw
Performance counter stats for 'system wide':
19,417,779,115 hisi_sicl0_cpa0/cpa_cycles/ # 0.00 cpa_p0_avg_bw
0 hisi_sicl0_cpa0/cpa_p0_wr_dat/
0 hisi_sicl0_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl0_cpa0/cpa_p0_rd_dat_32b/
19,417,751,103 hisi_sicl10_cpa0/cpa_cycles/ # 0.00 cpa_p0_avg_bw
0 hisi_sicl10_cpa0/cpa_p0_wr_dat/
0 hisi_sicl10_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl10_cpa0/cpa_p0_rd_dat_32b/
19,417,730,679 hisi_sicl2_cpa0/cpa_cycles/ # 0.31 cpa_p0_avg_bw
75,635,749 hisi_sicl2_cpa0/cpa_p0_wr_dat/
18,520,640 hisi_sicl2_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl2_cpa0/cpa_p0_rd_dat_32b/
19,417,674,227 hisi_sicl8_cpa0/cpa_cycles/ # 0.00 cpa_p0_avg_bw
0 hisi_sicl8_cpa0/cpa_p0_wr_dat/
0 hisi_sicl8_cpa0/cpa_p0_rd_dat_64b/
0 hisi_sicl8_cpa0/cpa_p0_rd_dat_32b/
19.417734480 seconds time elapsed
With --pmu-filter, users can select only hisi_sicl2_cpa0 PMU.
# perf stat --pmu-filter hisi_sicl2_cpa0 -M cpa_p0_avg_bw
Performance counter stats for 'system wide':
6,234,093,559 cpa_cycles # 0.60 cpa_p0_avg_bw
50,548,465 cpa_p0_wr_dat
7,552,182 cpa_p0_rd_dat_64b
0 cpa_p0_rd_dat_32b
6.234139320 seconds time elapsed
Data type profiling:
- Quality improvements by tracking register state more precisely
- Ensure array members to get the type
- Handle more cases for global variables
Vendor event/metric updates:
- Update various Intel events and metrics
- Add NVIDIA Tegra 410 Olympus events
Internal changes:
- Verify perf.data header for maliciously crafted files
- Update perf test to cover more usages and make them robust
- Move a couple of copied kernel headers not to annoy objtool build
- Fix a bug in map sorting in name order
- Remove some unused codes
Misc:
- Fix module symbol resolution with non-zero text address
- Add -t/--threads option to `perf bench mem mmap`
- Track duration of exit*() syscall by `perf trace -s`
- Add core.addr2line-timeout and core.addr2line-disable-warn config
items"
* tag 'perf-tools-for-v7.1-2026-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (131 commits)
perf loongarch: Fix build failure with CONFIG_LIBDW_DWARF_UNWIND
perf annotate: Use jump__delete when freeing LoongArch jumps
perf test: Fixes for check branch stack sampling
perf test: Fix inet_pton probe failure and unroll call graph
perf build: fix "argument list too long" in second location
perf header: Add sanity checks to HEADER_BPF_BTF processing
perf header: Sanity check HEADER_BPF_PROG_INFO
perf header: Sanity check HEADER_PMU_CAPS
perf header: Sanity check HEADER_HYBRID_TOPOLOGY
perf header: Sanity check HEADER_CACHE
perf header: Sanity check HEADER_GROUP_DESC
perf header: Sanity check HEADER_PMU_MAPPINGS
perf header: Sanity check HEADER_MEM_TOPOLOGY
perf header: Sanity check HEADER_NUMA_TOPOLOGY
perf header: Sanity check HEADER_CPU_TOPOLOGY
perf header: Sanity check HEADER_NRCPUS and HEADER_CPU_DOMAIN_INFO
perf header: Bump up the max number of command line args allowed
perf header: Validate nr_domains when reading HEADER_CPU_DOMAIN_INFO
perf sample: Fix documentation typo
perf arm_spe: Improve SIMD flags setting
...
Add myself as a page cache reviewer since I tend to review changes in
these areas anyway.
[akpm@linux-foundation.org: add linux-mm@kvack.org]
Link: https://lore.kernel.org/20260415174039.13016-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Lorenzo Stoakes <ljs@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the -fsanitize=bounds sanitizer is enabled, gcc-16 sometimes runs
into a corner case in the read_ctrl_pos() pos function, where it sees
possible undefined behavior from the 'tier' index overflowing, presumably
in the case that this was called with a negative tier:
In function 'get_tier_idx',
inlined from 'isolate_folios' at mm/vmscan.c:4671:14:
mm/vmscan.c: In function 'isolate_folios':
mm/vmscan.c:4645:29: error: 'pv.refaulted' is used uninitialized [-Werror=uninitialized]
Part of the problem seems to be that read_ctrl_pos() has unusual calling
conventions since commit 37a260870f ("mm/mglru: rework type selection")
where passing MAX_NR_TIERS makes it accumulate all tiers but passing a
smaller positive number makes it read a single tier instead.
Shut up the warning by adding a fake initialization to the two instances
of this variable that can run into that corner case.
Link: https://lore.kernel.org/all/CAJHvVcjtFW86o5FoQC8MMEXCHAC0FviggaQsd5EmiCHP+1fBpg@mail.gmail.com/
Link: https://lore.kernel.org/20260414065206.3236176-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Koichiro Den <koichiro.den@canonical.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use my personal email address due to the Red Hat work will stop soon
Link: https://lore.kernel.org/ad8GFhh3SI1wb7IC@darkstar.users.ipa.redhat.com
Signed-off-by: Dave Young <ruirui.yang@linux.dev>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The directory does not exist any more.
Link: https://lore.kernel.org/20260414121752.1912847-4-pratyush@kernel.org
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The KHO entry already includes include/linux/kho. Listing its
subdirectory is redundant.
Link: https://lore.kernel.org/20260414121752.1912847-3-pratyush@kernel.org
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "MAINTAINERS: update KHO and LIVE UPDATE entries".
This series contains some updates for the Kexec Handover (KHO) and Live
update entries. Patch 1 updates the maintainers list and adds the
liveupdate tree. Patches 2 and 3 clean up stale files in the list.
This patch (of 3):
I have been helping out with reviewing and developing KHO. I would also
like to help maintain it. Change my entry from R to M for KHO and live
update. Alex has been inactive for a while, so to avoid over-crowding the
KHO entry and to keep the information up-to-date, move his entry from M to
R.
We also now have a tree for KHO and live update at liveupdate/linux.git
where we plan to start maintaining those subsystems and start queuing the
patches. List that in the entries as well.
Link: https://lore.kernel.org/20260414121752.1912847-1-pratyush@kernel.org
Link: https://lore.kernel.org/20260414121752.1912847-2-pratyush@kernel.org
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: David Hildenbrand <david@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update KEXEC and KDUMP maintainer entries by adding the live update group
maintainers. Remove Vivek Goyal due to inactivity to keep the MAINTAINERS
file up-to-date, and add Vivek to the CREDITS file to recognize their
contributions.
Link: https://lore.kernel.org/20260413121146.49215-1-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Diego Viola <diego.viola@gmail.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The softleaf_is_migration() check is unreachable as entries that are not
device_private are filtered out. Similarly, the PTE-level equivalent in
migrate_vma_collect_pmd() skips migration entries.
This dead branch also contained a double spin_unlock(ptl) bug.
Link: https://lore.kernel.org/20260212014611.416695-1-dave@stgolabs.net
Fixes: a30b48bf1b ("mm/migrate_device: implement THP migration of zone device pages")
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
charge_reserved_hugetlb.sh tears down background writers with killall from
psmisc. Minimal Ubuntu images do not always provide that tool, so the
selftest fails in cleanup for an environment reason rather than for the
hugetlb behavior it is trying to cover.
Skip the test when killall is unavailable, similar to the existing root
check, so these environments report the dependency clearly instead of
failing the test.
Link: https://lore.kernel.org/20260410044139.67480-1-create0818@163.com
Signed-off-by: Cao Ruichuang <create0818@163.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
