[WHY]
When monitor is still booting EDID read can fail while DPCD read
is successful. In this case no EDID data will be returned, and this
could happen for a while.
[HOW]
Increase number of attempts to read EDID in dm_helpers_read_local_edid()
to 25.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dereferences amdgpu_dm_connector->dc_link early to
initialize verified_link_cap and dc, but later still checks
amdgpu_dm_connector->dc_link for NULL in the analog path.
This late NULL check is redundant, introduce a local dc_link pointer,
use it consistently, and drop the superfluous NULL check while using
dc_link->link_id.id instead.
The function uses dc_link at the very beginning without checking if it
is NULL. But later in the code, it suddenly checks if dc_link is NULL.
This check is too late to be useful, because the code has already used
dc_link earlier. So this NULL check does nothing.
We simplify the code by storing amdgpu_dm_connector->dc_link in a local
dc_link variable and using it throughout the function. Since dc_link is
already dereferenced early, the later NULL check is unnecessary and is
removed.
Fixes the below:
amdgpu_dm_connector_get_modes():
variable dereferenced before check 'amdgpu_dm_connector->dc_link'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c
8845 &amdgpu_dm_connector->dc_link->verified_link_cap;
8846 const struct dc *dc = amdgpu_dm_connector->dc_link->dc;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Dereference
...
8856
8857 if (amdgpu_dm_connector->dc_sink &&
8858 amdgpu_dm_connector->dc_link &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Checked too late.
Presumably this NULL check could be removed?
...
Fixes: d46e422f65 ("drm/amd/display: Cleanup uses of the analog flag")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When a laptop lid is closed the connector is disabled but userspace
can still try to change brightness. This doesn't work because the
panel is turned off. It will eventually time out, but there is a lot
of stutter along the way.
[How]
Iterate all connectors to check whether the matching one for the backlight
index is enabled.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4675
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields
of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the
ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4
then the last bit is always 1 so this code always sets .H_SYNC_POLARITY
and .V_SYNC_POLARITY to true.
This code is instead intended to check if the ATOM_HSYNC_POLARITY or
ATOM_VSYNC_POLARITY flags are set and reverse the result. In other
words, it's supposed to be a logical negate instead of a bitwise negate.
Fixes: ae79c310b1 ("drm/amd/display: Add DCE12 bios parser support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we're leaking memory.
Fixes: db36632ea5 ("drm/amdgpu: clean up and unify hw fence handling")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If memory is freed we need to nullify the pointer or the caller
might call kfree again (eg: amdgpu_cs_parser_fini calls kfree on
all non-null job pointers).
Fixes: db36632ea5 ("drm/amdgpu: clean up and unify hw fence handling")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
- make pp_table invisible on VF mode (only valid on BM)
- make pp_table invisible on Mi* chips (Not supported)
- make pp_table invisible if scpm feature is enabled.
v2:
move pp_table invisible code logic into amdgpu_dpm_get_pp_table() function.
v3:
add table buffer pointer check both on powerplay & swsmu.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original patch introduced additional latency during boot time
because it triggers a driver reload to avoid a CP hang when the driver
is reloaded multiple times. This has been addressed with a more generic
solution that triggers the GPU reset only during the unload phase,
avoiding extra latency during boot time. For this reason, this commit
reverts the original change.
This reverts commit 72a98763b4.
This patch should only be applied if commit:
4355e61835e7 ("drm/amdgpu: Fix GFX hang on SteamDeck when amdgpu is reloaded")
is present.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When trying to unload amdgpu in the SteamDeck (TTY mode), the following
set of errors happens and the system gets unstable:
[..]
[drm] Initialized amdgpu 3.64.0 for 0000:04:00.0 on minor 0
amdgpu 0000:04:00.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on gfx_0.0.0 (-110).
amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110).
[..]
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
[..]
When the driver initializes the GPU, the PSP validates all the firmware
loaded, and after that, it is not possible to load any other firmware
unless the device is reset. What is happening in the load/unload
situation is that PSP halts the GC engine because it suspects that
something is amiss. To address this issue, this commit ensures that the
GPU is reset (mode 2 reset) in the unload sequence.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reserve vm invalidation engine 6 when uni_mes enabled. It
is used in processing tlb flush request from host.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MMIO_REMAP BO is a special 4K IO page that does not have a ttm_tt
behind it. However, amdgpu_ttm_tt_pde_flags() was treating it like
normal TT/doorbell/preempt memory and unconditionally accessed
ttm->caching. For the MMIO_REMAP BO, ttm is NULL, so this leads to a
NULL pointer dereference when computing PDE flags.
Fix this by checking that ttm is non-NULL before reading ttm->caching.
This prevents the crash for MMIO_REMAP and also makes the code more
defensive if other BOs ever come through without a ttm_tt.
Fixes: fb5a52dbe9 ("drm/amdgpu: Implement TTM handling for MMIO_REMAP placement")
Suggested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Tested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes sparse mappings (aka. partially resident textures).
Check the correct flags.
Since a recent refactor, the code works with uAPI flags (for
mapping buffer objects), and not PTE (page table entry) flags.
Fixes: 6716a823d1 ("drm/amdgpu: rework how PTE flags are generated v3")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Accoreding to CP updated to RS64 on gfx11,
WRITE_DATA with PREEMPTION_META_MEMORY(dst_sel=8) is illegal for CP FW.
That packet is used for MCBP on F32 based system.
So it would lead to incorrect GRBM write and FW is not handling that
extra case correctly.
[How]
With gfx11 rs64 enabled, skip emit de meta data.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the suspend sequence VPE is already going to be power gated
as part of vpe_suspend(). It's unnecessary to call during calls to
amdgpu_device_set_pg_state().
It actually can expose a race condition with the firmware if s0i3
sequence starts as well. Drop these calls.
Cc: Peyton.Lee@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of checking that the signal is analog before calling the
HWSS disable_audio_stream() function to disable audio, move
the check inside the HWSS function.
Suggested-by: Ray Wu <Ray.Wu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20251113163348.137315-5-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match pre-existing patterns in the DC code base.
Instead of returning early from the construct_phy() function,
add a label at the end and use goto to jump there.
Additionally, respect the DC logger and let it log the function
even when it returns early.
Suggested-by: Ray Wu <Ray.Wu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20251113163348.137315-4-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the detect_link_and_local_sink() function, do not modify the
EDID capabilities of the display based on the connector. Instead,
respect the analog flag better and when the analog flag is set,
check that the connector indeed supports analog displays.
Suggested-by: Ray Wu <Ray.Wu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20251113163348.137315-3-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following warning that some users are reporting
with some kernel configurations:
"positional initialization of field in 'struct' declared
with 'designated_init' attribute"
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20251113163348.137315-2-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete the attempt to progress the queue when checking if fence is
signaled. This avoids deadlock.
dma-fence_ops::signaled can be called with the fence lock in unknown
state. For radeon, the fence lock is also the wait queue lock. This can
cause a self deadlock when signaled() tries to make forward progress on
the wait queue. But advancing the queue is unneeded because incorrectly
returning false from signaled() is perfectly acceptable.
Link: https://github.com/brave/brave-browser/issues/49182
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4641
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Robert McClinton <rbmccav@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change comments from kernel-doc style "/**" to normal C comments
"/*" since the comments are not in kernel-doc format.
This fixes around 39 kernel-doc warnings like this one:
drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c:1322: warning:
This comment starts with '/**', but isn't a kernel-doc comment.
Refer Documentation/doc-guide/kernel-doc.rst
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511062036.Ry8Z2APc-lkp@intel.com/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Add interface to capture expected HW state from SW state
- Add panel Replay capability detection, DPCD reading, and enablement logic
- Re-check seamless boot enablement on subsequent dc_commit_streams
- Improve DPCD link capability retrieval with increased retries and per-retry delays
- Add HPD filter for HDMI
- Add pipe topology history tracking to DC
- Fix MST initialization on resume when switching from SST to MST during suspend
- Fix double cursor on DCN20 & DCN30 in non-native scaling
- Check DCCG_AUDIO_DTO2 register mask before access
- Fix pbn to kbps conversion
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Ignore Coverity false positive analysis in the dmub_cmd.h
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Existing routine has two conversion sequence,
pbn_to_kbps and kbps_to_pbn with margin.
Non of those has without-margin calculation.
kbps_to_pbn with margin conversion includes
fec overhead which has already been included in
pbn_div calculation with 0.994 factor considered.
It is a double counted fec overhead factor that causes
potential bw loss.
[How]
Add without-margin calculation.
Fix fec overhead double counted issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3735
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Check DCCG_AUDIO_DTO2 register mask exist before access.
Also, add a existing DIO_CLOCK_control register for later use.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Check that the stream exists to add link->local_sink null pointer access
protection.
Reviewed-by: Harold Sun <harold.sun@amd.com>
Reviewed-by: Ethan Cheung <ethan.cheung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and
cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5,
while it's still powered on, the cached cursor_state
(dpp_base->pos.cur0_ctl.bits.cur0_enable)
and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a
double cursor in full screen with non-native scaling.
[How]
Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no way to check pipe topology update history through a
dump.
[How]
Add a topology history structure to dc with snapshots of the most recent
pipe topology updates.
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some monitors perform rapid “autoscan” HPD re‑assertions right after a
disconnect or powersaving mode enablement. These appear as a quick
disconnect→reconnect with an identical EDID. Since Linux has no HDMI
hotplug detection (HPD) filter, these quick reconnects are seen as hotplug
events, which can unintentionally wake a system with DPMS off.
An example: https://gitlab.freedesktop.org/drm/amd/-/issues/2876
Such 'fake reconnects' are considered when the interval between a
disconnect and a connect is within 1500ms (experimentally chosen using
several monitors), and the two connections have the same EDID.
[How]
Implement a time-based debounce mechanism:
1. On HDMI disconnect detection, instead of immediately processing the
HPD event, save the current sink and schedule delayed work (default 1500ms)
2. If another HDMI disconnect HPD event arrives during the debounce period,
it reschedules the pending work, ensuring only the final state is processed.
3. When the debounce timer expires, re-detect the display and compare the
new sink with the cached one using EDID comparison.
4. If sinks match (same EDID), this was a spontaneous HPD toggle:
- Update connector state internally
- Skip hotplug event to prevent desktop rearrangement
If sinks differ, this was a real display change:
- Process normally with the hotplug event
The debounce delay is configurable via module parameter
'hdmi_hpd_debounce_delay_ms'.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2876
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Empirical measurement of some monitors that fail to read EDID while
booting shows that the number of retries with a 30ms delay between
tries is as high as 16.
[How]
Increase number of retries to 20.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When a monitor is booting it's possible that it isn't ready to retrieve
link caps and this can lead to an EDID read failure:
```
[drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed.
amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read.
```
[How]
Rather than msleep once and try a few times, msleep each time. Should
be no changes for existing working monitors, but should correct reading
caps on a monitor that is slow to boot.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the seamless boot feature has already been enabled, and
dc_commit_streams is called again before receiving a flip, the
driver will adjust the engine clock without turning off the screen,
which will cause garbage to occur. However, in reality, the Pixel
Clock from the first dc_commit_streams and the second dc_commit_streams
are different.
[How]
If the apply seamless boot flag in the previous stream has not been
cleared, and dc_commit_streams is received again, we need to recheck
whether seamless boot should be disabled
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Read Panel replay caps from DPCD when retrieving link capability
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
1.Add flow to enable and configure panel replay enablement and
configuration
2.Add registry key for enable option
3.Add replay version check to be compatible with freesync replay
4.Add AC/DC switch function to notify ac/dc change.
5.Add flow in set event function to check and decide Replay
enable/disable
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
For supporting VESA PR, add flow to determine the support capability
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Jack Chang <jack.chang@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To debug certain issues, such as underflow, it is common practice to
dump the HW state of all registers for analysis. The first thing to
check with the dump is to ensure all values are programmed as expected
according to SW state.
[How]
Add interface to DC to capture expected HW register values based on SW
state.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu:
- RAS updates
- GC12 DCC P2P fix
- Documentation fixes
- Power limit code cleanup
- Userq updates
- VRR fix
- SMART OLED support
- DSC refactor for DCN 3.5
- Replay updates
- DC clockgating updates
- HDCP refactor
- ISP fix
- SMU 13.0.12 updates
- JPEG 5.0.1 fix
- VCE1 support
- Enable DC by default on SI
- Refactor CIK and SI enablement
- Enable amdgpu by default for CI dGPUs
- XGMI fixes
- SR-IOV fixes
- Memory allocation critical path fixes
- Enable amdgpu by default on SI dGPUs
amdkfd:
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- Refactor CIK and SI enablement
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCaReBigAKCRC93/aFa7yZ
2JqCAQDZYnl6lkfzXcm3z5qqI3DmEyREO75hn0IEffyehAhUYwD9FpC48tTCyzeY
1MQZ+ORH12VXuiT4Y+wBIiFetQV96QA=
=uThs
-----END PGP SIGNATURE-----
Merge tag 'amd-drm-next-6.19-2025-11-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.19-2025-11-14:
amdgpu:
- RAS updates
- GC12 DCC P2P fix
- Documentation fixes
- Power limit code cleanup
- Userq updates
- VRR fix
- SMART OLED support
- DSC refactor for DCN 3.5
- Replay updates
- DC clockgating updates
- HDCP refactor
- ISP fix
- SMU 13.0.12 updates
- JPEG 5.0.1 fix
- VCE1 support
- Enable DC by default on SI
- Refactor CIK and SI enablement
- Enable amdgpu by default for CI dGPUs
- XGMI fixes
- SR-IOV fixes
- Memory allocation critical path fixes
- Enable amdgpu by default on SI dGPUs
amdkfd:
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- Refactor CIK and SI enablement
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20251114192553.442621-1-alexander.deucher@amd.com
Driver Changes:
Fixes/improvements/new stuff:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD (Janusz Krzysztofik)
- Use standard API for seqcount read in TLB invalidation [gt] (Andi Shyti)
Miscellaneous:
- Wait longer for threads in migrate selftest on CHV/BXT+VTD (Janusz Krzysztofik)
- Wait for page_sizes_gtt in gtt selftest on CHV/BXT+VTD (Janusz Krzysztofik)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patch.msgid.link/aRdXOAKlTVX_b0en@linux
drm/i915 feature pull #2 for v6.19:
Features and functionality:
- Add initial display support for Xe3p_LPD, display version 35 (Sai Teja, Matt
R, Gustavo, Matt A, Ankit, Juha-pekka, Luca, Ravi Kumar)
- Compute LT PHY HDMI params when port clock not in predefined tables (Suraj)
Refactoring and cleanups:
- Refactor intel_frontbuffer split between i915, xe, and display (Ville)
- Clean up intel_de_wait_custom() usage (Ville)
- Unify display register polling interfaces (Ville)
- Finish removal of the expensive format info lookups (Ville)
- Cursor code cleanups (Ville)
- Convert intel_rom interfaces to struct drm_device (Jani)
Fixes:
- Fix uninitialized variable in DSI exec packet (Jonathan)
- Fix PIPEDMC logging (Alok Tiwari)
- Fix PSR pipe to vblank conversion (Jani)
- Fix intel_frontbuffer lifetime handling (Ville)
- Disable Panel Replay on DP MST for the time being (Imre)
Merges:
- Backmerge drm-next to get the drm_print.h changes (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/b131309bb7310ab749f1770aa6e36fa8d6a82fa5@intel.com
drm-misc-next for v6.19:
UAPI Changes:
- Add sysfs entries, coredump support and uevents to QAIC.
- Add fdinfo memory statistics to ivpu.
Cross-subsystem Changes:
- Handle stub fence initialization during module init.
- Stop using system_wq in scheduler and drivers.
Core Changes:
- Documentation updates to ttm, vblank.
- Add EDID quirk for sharp panel.
- Use drm_crtc_vblank_(crtc,waitqueue) more in core and drivers.
Driver Changes:
- Small updates and fixes to panfrost, amdxdna, vmwgfx, ast, ivpu.
- Handle preemption in amdxdna.
- Add PM support to qaic.
- Huge refactor of sun4i's layer code to decouple plane code from output
and improve support for DE33.
- Add larger page and compression support to nouveau.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/1ad3ea69-d029-4a21-8b3d-6b264b1b2a30@linux.intel.com
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump improvement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCaRcIGwAKCRC4FpNVCsYG
v3VWAQD7eVdaBKgOUoyWexzeWiHeAEAe9QwgTdK71PBNHF1kIQEA3dg12QDETxFp
pWvOYie6bl+ApXx/JJ0OKtMeIFz2mQc=
=MS1G
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-11-14' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
Avoid TOCTOU when montoring throttle reasons (Lucas)
Add/extend workaround (Nitin)
SRIOV migration work / plumbing (Michal Wajdeczko, Michal Winiarski, Lukasz)
Drop debug flag requirement for VF resource fixup
Fix MTL vm_max_level (Rodrigo)
Changes around TILE_ADDR_RANGE for platform compatibility
(Fei, Lucas)
Add runtime registers for GFX ver >= 35 (Piotr)
Kerneldoc fix (Kriish)
Rework pcode error mapping (Lucas)
Allow lockdown the PF (Michal)
Eliminate GUC code caching of some frequency values (Sk)
Improvements around forcewake referencing (Matt Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aRcJOrisG2qPbucE@fedora
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump imprement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCaQt/tgAKCRC4FpNVCsYG
v76LAP0Z/v7VvMkMI3SHkEO9ws3OJxtdbIfveEQBPMDNpmjJtwD/U0Gx0bkeTxkl
AuewAg2G+XUXfmhqj1G6JsI24YPY2wk=
=xoK5
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-11-05' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
Limit number of jobs per exec queue (Shuicheng)
Add sriov_admin sysfs tree (Michal)
Driver Changes:
Fix an uninitialized value (Thomas)
Expose a residency counter through debugfs (Mohammed Thasleem)
Workaround enabling and improvement (Tapani, Tangudu)
More Crescent Island-specific support (Sk Anirban, Lucas)
PAT entry dump imprement (Xin)
Inline gt_reset in the worker (Lucas)
Synchronize GT reset with device unbind (Balasubramani)
Do clean shutdown also when using flr (Jouni)
Fix serialization on burst of unbinds (Matt Brost)
Pagefault Refactor (Matt Brost)
Remove some unused code (Gwan-gyeong)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aQuBECxNOhudc0Bz@fedora
Now that the DC analog connector support and VCE1 support landed,
amdgpu is at feature parity with the old radeon driver
on SI dGPUs.
Enabling the amdgpu driver by default for SI dGPUs has the
following benefits:
- More stable OpenGL support through RadeonSI
- Vulkan support through RADV
- Improved performance
- Better display features through DC
Users who want to keep using the old driver can do so using:
amdgpu.si_support=0 radeon.si_support=1
v2:
- Update documentation in Kconfig file
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu driver has been working well on CIK dGPUs for years.
Now that the DC analog connector support landed,
amdgpu is at feature parity with the old radeon driver
on CIK dGPUs.
Enabling the amdgpu driver by default for CIK dGPUs has the
following benefits:
- More stable OpenGL support through RadeonSI
- Vulkan support through RADV
- Improved performance
- Better display features through DC
Users who want to keep using the old driver can do so using:
amdgpu.cik_support=0 radeon.cik_support=1
v2:
- Update documentation in Kconfig file
v3:
- Rebase documentation updates (Alex)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code only applies to amdgpu processing
poison consumption after uniras is enabled,
but not to sriov.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
