Currently we are registering one dynamic lockdep key for each allocated
qdisc, to avoid false deadlock reports when mirred (or TC eBPF) redirects
packets to another device while the root lock is acquired [1].
Since dynamic keys are a limited resource, we can save them at least for
qdiscs that are not meant to acquire the root lock in the traffic path,
or to carry traffic at all, like:
- clsact
- ingress
- noqueue
Don't register dynamic keys for the above schedulers, so that we hit
MAX_LOCKDEP_KEYS later in our tests.
[1] https://github.com/multipath-tcp/mptcp_net-next/issues/451
Changes in v2:
- change ordering of spin_lock_init() vs. lockdep_register_key()
(Jakub Kicinski)
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/94448f7fa7c4f52d2ce416a4895ec87d456d7417.1770220576.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When looking at the iMX93 documentation, the definitions in the driver
do not correspond with the documentation, which makes the driver
confusing.
The driver, for example, re-uses a definition for bit 0 for two
different registers, where this bit have completely different purposes.
Fix this by renaming the second register, and adding a definition that
reflects the true purpose of bit 0 in the first register (EQOS enable.)
Replace MX93_GPR_ENET_QOS_INTF_MODE_MASK with MX93_GPR_ENET_QOS_ENABLE
and MX93_GPR_ENET_QOS_INTF_SEL_MASK as MX93_GPR_ENET_QOS_INTF_MODE_MASK
is not a register field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnaGl-00000007i9f-0ZMw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP v6 spends a good amount of time rebuilding a fresh fl6 at each
transmit in inet6_csk_xmit()/inet6_csk_route_socket().
TCP v4 caches the information in inet->cork.fl.u.ip4 instead.
This patch is a first step converting IPv6 to the same strategy:
Before this patch inet6_sk_rebuild_header() only validated/rebuilt
a dst. Automatic variable @fl6 content was lost.
After this patch inet6_sk_rebuild_header() also initializes
inet->cork.fl.u.ip6, which can be reused in the future.
This makes inet6_sk_rebuild_header() very similar to
inet_sk_rebuild_header().
Also remove the EXPORT_SYMBOL_GPL(), inet6_sk_rebuild_header()
is not called from any module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260204163035.4123817-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: remove net/core/request_sock.c and no longer inline __reqsk_free()
After DCCP removal, net/core/request_sock.c makes no more sense.
Move reqsk_queue_alloc() and reqsk_fastopen_remove() to TCP files.
Then put __reqsk_free() out of line to save ~2 Kbytes of text.
====================
Link: https://patch.msgid.link/20260204055147.1682705-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After DCCP removal, this file was not needed any more.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function belongs to TCP stack, not to net/core/request_sock.c
We get rid of the now empty request_sock.c n the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only called once from inet_csk_listen_start(), it can be static.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: rk: final cleanups part
This is the last part of my current dwmac-rk cleanups.
====================
Link: https://patch.msgid.link/aYMN2gZMfLPKuukG@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rk3506, rk3528 and rk3588 have the rmii_mode bit in the clock GRF
register rather than the gmac GRF register. Provide a mask for this
field in the clock register, and convert these SoCs to use this.
Add the necessary code in rk_gmac_powerup() to write this field.
This allows us to get rid of these SoCs set_to_rmii() function. As
such, we need to mark these SoCs as supporting RMII mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYyB-00000007hpF-1dwK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use rk_encode_wm16() for RMII clock gating control, and also for the
io_clksel bit used to select the transmit clock between CRU-derived
and IO-derived clock sources.
Both of these were configured via the "set_clock_selection" method in
the SoC specific operations, but there is no requirement to change the
io_clksel except when enabling clocks.
It is also possible that we don't need to ungate the RMII clock if we
are operating in RGMII mode, but this commit makes no change there.
Split up the configuration of these as separate functions, and remove
the set_clock_selection() method. Since these clocking bits are in the
same register that we call the "speed" register, move the logic for
writing that register into rk_write_speed_grf_reg().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYy6-00000007hp9-1AJM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RK3528 gmac0 dtsi contains:
gmac0: ethernet@ffbd0000 {
phy-handle = <&rmii0_phy>;
phy-mode = "rmii";
mdio0: mdio {
rmii0_phy: ethernet-phy@2 {
phy-is-integrated;
};
};
};
This follows the same pattern as rk3328, where this gmac instance
only supports RMII. Disable RGMII in phylink's supported_interfaces
mask for this gmac instance.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/E1vnYy1-00000007hp3-0hKm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As detailed in a previous commit ("net: stmmac: rk: convert rk3328 to
use bsp_priv->id") rk3328 gmac2phy only supports RMII, whereas gmac2io
supports both RMII and RGMII. Clear supports_rgmii for gmac2phy.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328 gmac2io,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxw-00000007hox-0DqH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than providing a now-empty set_to_rmii() method to indicate
that RMII is supported, switch to setting ops->supports_rmii instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxq-00000007hor-3yXt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce two boolean flags into struct rk_priv_data indicating
whether RGMII and/or RMII is supported for this instance. Use these
to configure the supported_interfaces mask for phylink, validate the
interface mode. Initialise these from equivalent flags in the
rk_gmac_ops or depending on the presence of the ops->set_to_rgmii and
ops->set_to_mii methods. Finally, make ops->set_to_* optional.
This will allow us to get rid of empty set_to_rmii() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxl-00000007hol-3XiH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c5 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f72514b3c5 ("ipv6: clear RA flags when adding a static route")
Reported-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cb809def1baaac68ab92
Tested-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260204095837.1285552-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=eIZs
-----END PGP SIGNATURE-----
Merge tag 'nf-26-02-05' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: update for net
This is one last-minute crash fix for nf_tables, from Andrew Fasano:
Logical check is inverted, this makes kernel fail to correctly undo
the transaction, leading to a use-after-free.
* tag 'nf-26-02-05' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
====================
Link: https://patch.msgid.link/20260205074450.3187-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some functions do not modify the pointed-to data, but lack const
qualifiers. Add const qualifiers to the arguments of
flow_rule_match_has_control_flags() and flow_cls_offload_flow_rule().
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260204052839.198602-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ivan Vecera says:
====================
dpll: Core improvements and ice E825-C SyncE support
This series introduces Synchronous Ethernet (SyncE) support for the Intel
E825-C Ethernet controller. Unlike previous generations where DPLL
connections were implicitly assumed, the E825-C architecture relies
on the platform firmware (ACPI) to describe the physical connections
between the Ethernet controller and external DPLLs (such as the ZL3073x).
To accommodate this, the series extends the DPLL subsystem to support
firmware node (fwnode) associations, asynchronous discovery via notifiers,
and dynamic pin management. Additionally, a significant refactor of
the DPLL reference counting logic is included to ensure robustness and
debuggability.
DPLL Core Extensions:
* Firmware Node Association: Pins can now be associated with a struct
fwnode_handle after allocation via dpll_pin_fwnode_set(). This allows
drivers to link pin objects with their corresponding DT/ACPI nodes.
* Asynchronous Notifiers: A raw notifier chain is added to the DPLL core.
This allows the Ethernet driver to subscribe to events and react when
the platform DPLL driver registers the parent pins, resolving probe
ordering dependencies.
* Dynamic Indexing: Drivers can now request DPLL_PIN_IDX_UNSPEC to have
the core automatically allocate a unique pin index.
Reference Counting & Debugging:
* Refactor: The reference counting logic in the core is consolidated.
Internal list management helpers now automatically handle hold/put
operations, removing fragile open-coded logic in the registration paths.
* Reference Tracking: A new Kconfig option DPLL_REFCNT_TRACKER is added.
This allows developers to instrument and debug reference leaks by
recording stack traces for every get/put operation.
Driver Updates:
* zl3073x: Updated to associate pins with fwnode handles using the new
setter and support the 'mux' pin type.
* ice: Implements the E825-C specific hardware configuration for SyncE
(CGU registers). It utilizes the new notifier and fwnode APIs to
dynamically discover and attach to the platform DPLLs.
Patch Summary:
Patch 1: DPLL Core (fwnode association).
Patch 2: Driver zl3073x (Set fwnode).
Patch 3-4: DPLL Core (Notifiers and dynamic IDs).
Patch 5: Driver zl3073x (Mux type).
Patch 6: DPLL Core (Refcount refactor).
Patch 7-8: Refcount tracking infrastructure and driver updates.
Patch 9: Driver ice (E825-C SyncE logic).
====================
Link: https://patch.msgid.link/20260203174002.705176-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement SyncE support for the E825-C Ethernet controller using the
DPLL subsystem. Unlike E810, the E825-C architecture relies on platform
firmware (ACPI) to describe connections between the NIC's recovered clock
outputs and external DPLL inputs.
Implement the following mechanisms to support this architecture:
1. Discovery Mechanism: The driver parses the 'dpll-pins' and 'dpll-pin names'
firmware properties to identify the external DPLL pins (parents)
corresponding to its RCLK outputs ("rclk0", "rclk1"). It uses
fwnode_dpll_pin_find() to locate these parent pins in the DPLL core.
2. Asynchronous Registration: Since the platform DPLL driver (e.g.
zl3073x) may probe independently of the network driver, utilize
the DPLL notifier chain The driver listens for DPLL_PIN_CREATED
events to detect when the parent MUX pins become available, then
registers its own Recovered Clock (RCLK) pins as children of those
parents.
3. Hardware Configuration: Implement the specific register access logic
for E825-C CGU (Clock Generation Unit) registers (R10, R11). This
includes configuring the bypass MUXes and clock dividers required to
drive SyncE signals.
4. Split Initialization: Refactor `ice_dpll_init()` to separate the
static initialization path of E810 from the dynamic, firmware-driven
path required for E825-C.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-10-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update existing DPLL drivers to utilize the DPLL reference count
tracking infrastructure.
Add dpll_tracker fields to the drivers' internal device and pin
structures. Pass pointers to these trackers when calling
dpll_device_get/put() and dpll_pin_get/put().
This allows developers to inspect the specific references held by this
driver via debugfs when CONFIG_DPLL_REFCNT_TRACKER is enabled, aiding
in the debugging of resource leaks.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-9-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for the REF_TRACKER infrastructure to the DPLL subsystem.
When enabled, this allows developers to track and debug reference counting
leaks or imbalances for dpll_device and dpll_pin objects. It records stack
traces for every get/put operation and exposes this information via
debugfs at:
/sys/kernel/debug/ref_tracker/dpll_device_*
/sys/kernel/debug/ref_tracker/dpll_pin_*
The following API changes are made to support this:
1. dpll_device_get() / dpll_device_put() now accept a 'dpll_tracker *'
(which is a typedef to 'struct ref_tracker *' when enabled, or an empty
struct otherwise).
2. dpll_pin_get() / dpll_pin_put() and fwnode_dpll_pin_find() similarly
accept the tracker argument.
3. Internal registration structures now hold a tracker to associate the
reference held by the registration with the specific owner.
All existing in-tree drivers (ice, mlx5, ptp_ocp, zl3073x) are updated
to pass NULL for the new tracker argument, maintaining current behavior
while enabling future debugging capabilities.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-8-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the reference counting mechanism for DPLL devices and pins to
improve consistency and prevent potential lifetime issues.
Introduce internal helpers __dpll_{device,pin}_{hold,put}() to
centralize reference management.
Update the internal XArray reference helpers (dpll_xa_ref_*) to
automatically grab a reference to the target object when it is added to
a list, and release it when removed. This ensures that objects linked
internally (e.g., pins referenced by parent pins) are properly kept
alive without relying on the caller to manually manage the count.
Consequently, remove the now redundant manual `refcount_inc/dec` calls
in dpll_pin_on_pin_{,un}register()`, as ownership is now correctly handled
by the dpll_xa_ref_* functions.
Additionally, ensure that dpll_device_{,un}register()` takes/releases
a reference to the device, ensuring the device object remains valid for
the duration of its registration.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-7-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add parsing for the "mux" string in the 'connection-type' pin property
mapping it to DPLL_PIN_TYPE_MUX.
Recognizing this type in the driver allows these pins to be taken as
parent pins for pin-on-pin pins coming from different modules (e.g.
network drivers).
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-6-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow drivers to register DPLL pins without manually specifying a pin
index.
Currently, drivers must provide a unique pin index when calling
dpll_pin_get(). This works well for hardware-mapped pins but creates
friction for drivers handling virtual pins or those without a strict
hardware indexing scheme.
Introduce DPLL_PIN_IDX_UNSPEC (U32_MAX). When a driver passes this
value as the pin index:
1. The core allocates a unique index using an IDA
2. The allocated index is mapped to a range starting above `INT_MAX`
This separation ensures that dynamically allocated indices never collide
with standard driver-provided hardware indices, which are assumed to be
within the `0` to `INT_MAX` range. The index is automatically freed when
the pin is released in dpll_pin_put().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-5-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the DPLL subsystem reports events (creation, deletion, changes)
to userspace via Netlink. However, there is no mechanism for other kernel
components to be notified of these events directly.
Add a raw notifier chain to the DPLL core protected by dpll_lock. This
allows other kernel subsystems or drivers to register callbacks and
receive notifications when DPLL devices or pins are created, deleted,
or modified.
Define the following:
- Registration helpers: {,un}register_dpll_notifier()
- Event types: DPLL_DEVICE_CREATED, DPLL_PIN_CREATED, etc.
- Context structures: dpll_{device,pin}_notifier_info to pass relevant
data to the listeners.
The notification chain is invoked alongside the existing Netlink event
generation to ensure in-kernel listeners are kept in sync with the
subsystem state.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Associate the registered DPLL pin with its firmware node by calling
dpll_pin_fwnode_set().
This links the created pin object to its corresponding DT/ACPI node
in the DPLL core. Consequently, this enables consumer drivers (such as
network drivers) to locate and request this specific pin using the
fwnode_dpll_pin_find() helper.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-3-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend the DPLL core to support associating a DPLL pin with a firmware
node. This association is required to allow other subsystems (such as
network drivers) to locate and request specific DPLL pins defined in
the Device Tree or ACPI.
* Add a .fwnode field to the struct dpll_pin
* Introduce dpll_pin_fwnode_set() helper to allow the provider driver
to associate a pin with a fwnode after the pin has been allocated
* Introduce fwnode_dpll_pin_find() helper to allow consumers to search
for a registered DPLL pin using its associated fwnode handle
* Ensure the fwnode reference is properly released in dpll_pin_put()
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for devlink port function state get/set operations for the
host physical function (PF). Until now, mlx5 only allowed state get/set
for subfunctions (SFs) ports. This change enables an administrator with
eSwitch manager privileges to query or modify the host PF’s function
state, allowing it to be explicitly inactivated or activated. While
inactivated, the administrator can modify the functions attributes, such
as enable/disable roce.
$ devlink port show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608: type eth netdev eth1 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr a0:88:c2:45:17:7c state active opstate attached roce enable max_io_eqs 120
$ devlink port function set pci/0000:03:00.0/196608 state inactive
$ devlink port show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608: type eth netdev eth1 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr a0:88:c2:45:17:7c state inactive opstate detached roce enable max_io_eqs 120
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260203102402.1712218-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As CAN skbs don't use IP checksums the skb->csum_start variable was used to
store the can-gw CAN frame time-to-live counter together with
skb->ip_summed set to CHECKSUM_UNNECESSARY.
Remove the 'hack' using the skb->csum_start variable and move the content
to can_skb_ext::can_gw_hops of the CAN skb extensions.
The module parameter 'max_hops' has been reduced to a single byte to fit
can_skb_ext::can_gw_hops as the maximum value to be stored is 6.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-6-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch removes struct can_skb_priv which was stored at skb->head and
the can_skb_reserve() helper which was used to shift skb->head.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The can_skb_priv::frame_len variable is used to cache a previous
calculated CAN frame length to be passed to BQL queueing disciplines.
Move the can_skb_priv::frame_len content to can_skb_ext::can_framelen.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-4-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When routing CAN frames over different CAN interfaces the interface index
skb->iif is overwritten with every single hop. To prevent sending a CAN
frame back to its originating (first) incoming CAN interface another
ifindex variable is needed, which was stored in can_skb_priv::ifindex.
Move the can_skb_priv::ifindex content to can_skb_ext::can_iif.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-3-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To remove the private CAN bus skb headroom infrastructure 8 bytes need to
be stored in the skb. The skb extensions are a common pattern and an easy
and efficient way to hold private data travelling along with the skb. We
only need the skb_ext_add() and skb_ext_find() functions to allocate and
access CAN specific content as the skb helpers to copy/clone/free skbs
automatically take care of skb extensions and their final removal.
This patch introduces the complete CAN skb extensions infrastructure:
- add struct can_skb_ext in new file include/net/can.h
- add include/net/can.h in MAINTAINERS
- add SKB_EXT_CAN to skbuff.c and skbuff.h
- select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled
- check for existing CAN skb extensions in can_rcv() in af_can.c
- add CAN skb extensions allocation at every skb_alloc() location
- duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops)
- introduce can_skb_ext_add() and can_skb_ext_find() helpers
The patch also corrects an indention issue in the original code from 2018:
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recently TC maintainer Jamal intentionally a broke reasonable
use case:
https://lore.kernel.org/netdev/aG10rqwjX6elG1Gx@pop-os.localdomain/
Although I tried my best to help by:
1) Strongly objecting this breakage from the very beginning
2) Reverting it and offering a much better solution
3) Offering Jamal for video chat on 8 Jul 2025 and 26 Nov 2025
None of them worked.
So it makes no sense for me to continue caring about this subsystem.
Most importantly, intentionally breaking reasonable use cases is
against my moral, I don't want to get ashamed.
Thanks for the opportunity!
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20260130212021.46610-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PPP channels using chan->direct_xmit prepend the PPP header to a skb and
call dev_queue_xmit() directly. In this mode the skb does not need to be
linear, but the PPP netdevice currently does not advertise
scatter-gather features, causing unnecessary linearization and
preventing GSO.
Enable NETIF_F_SG and NETIF_F_FRAGLIST on PPP devices. In case a linear
buffer is required (PPP compression, multilink, and channels without
direct_xmit), call skb_linearize() explicitly.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260129012902.941-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones.
Fixes: 628bd3e49c ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Andrew Fasano <andrew.fasano@nist.gov>
Signed-off-by: Florian Westphal <fw@strlen.de>
The per-TC rate limit was restricted to 255 Gbps due to the 8-bit
max_bw_value field in the QETC register.
This limit is insufficient for newer, higher-bandwidth NICs.
Extend the rate limit by using the full 16-bit max_bw_value field.
This allows the finer 100Mbps granularity to be used for rates up to
~6.5 Tbps, instead of switching to 1Gbps granularity at higher rates.
The extended range is only used when the device advertises support
via the qetcr_qshr_max_bw_val_msb capability bit in the QCAM register.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260203073021.1710806-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5e: RX datapath enhancements
This series by Dragos introduces multiple RX datapath enhancements to
the mlx5e driver.
First patch adds SW handling for oversized packets in non-linear SKB
mode.
Second patch adds a reclaim mechanism to mitigate memory allocation
failures with memory providers.
====================
Link: https://patch.msgid.link/20260203072130.1710255-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When memory providers are used, there is a disconnect between the
page_pool size and the available memory in the provider. This means
that the page_pool can run out of memory if the user didn't provision
a large enough buffer.
Under these conditions, mlx5 gets stuck trying to allocate new
buffers without being able to release existing buffers. This happens due
to the optimization introduced in commit 4c2a132368
("net/mlx5e: RX, Defer page release in striding rq for better recycling")
which delays WQE releases to increase the chance of page_pool direct
recycling. The optimization was developed before memory providers
existed and this circumstance was not considered.
This patch unblocks the queue by reclaiming pages from WQEs that can be
freed and doing a one-shot retry. A WQE can be freed when:
1) All its strides have been consumed (WQE is no longer in linked list).
2) The WQE pages/netmems have not been previously released.
This reclaim mechanism is useful for regular pages as well.
Note that provisioning memory that can't fill even one MPWQE (64
4K pages) will still render the queue unusable. Same when
the application doesn't release its buffers for various reasons.
Or a combination of the two: a very small buffer is provisioned,
application releases buffers in bulk, bulk size never reached
=> queue is stuck.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203072130.1710255-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the driver has an inconsistent behaviour between modes when it
comes to oversized packets that are not dropped through the physical MTU
check in HW. This can happen for Multi Host configurations where each
port has a different MTU.
Current behavior:
1) Striding RQ in linear mode drops the packet in SW and counts it
with oversize_pkts_sw_drop.
2) Striding RQ in non-linear mode allows it like a normal packet.
3) Legacy RQ can't receive oversized packets by design:
the RX WQE uses MTU sized packet buffers.
This inconsistency is not a violation of the netdev policy [1]
but it is better to be consistent across modes.
This patch aligns (2) with (1) and (3). One exception is added for
LRO: don't drop the oversized packet if it is an LRO packet.
As now rq->hw_mtu always needs to be updated during the MTU change flow,
drop the reset avoidance optimization from mlx5e_change_mtu().
Extract the CQE LRO segments reading into a helper function as it
is used twice now.
[1] Documentation/networking/netdevices.rst#L205
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203072130.1710255-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dwmac databook for v3.74a states that lpi_intr_o is a sideband
signal which should be used to ungate the application clock, and this
signal is synchronous to the receive clock. The receive clock can run
at 2.5, 25 or 125MHz depending on the media speed, and can stop under
the control of the link partner. This means that the time it takes to
clear is dependent on the negotiated media speed, and thus can be 8,
40, or 400ns after reading the LPI control and status register.
It has been observed with some aggressive link partners, this clock
can stop while lpi_intr_o is still asserted, meaning that the signal
remains asserted for an indefinite period that the local system has
no direct control over.
The LPI interrupts will still be signalled through the main interrupt
path in any case, and this path is not dependent on the receive clock.
This, since we do not gate the application clock, and the chances of
adding clock gating in the future are slim due to the clocks being
ill-defined, lpi_intr_o serves no useful purpose. Remove the code which
requests the interrupt, and all associated code.
Reported-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> # Renesas RZ/V2H board
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: fix serdes power methods
The stmmac serdes powerup/powerdown methods are not guaranteed to be
called in a balancing fashion, but these are used to call the generic
PHY subsystem's phy_power_up() and phy_power_down() methods which do
require balanced calls.
This series addresses this by making the stmmac serdes methods balanced.
====================
Link: https://patch.msgid.link/aYHHWm5UkD1JVa7D@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the SerDes power up and down calls for the non-"after linkup"
case out of __stmmac_open() and __stmmac_release() into the
stmmac_open() and stmmac_release() methods, which means the SerDes
will only change power state on administrative changes or suspend/
resume, not while changing the interface MTU.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDt-00000007XxF-3uUK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The open path is missing cleanup of a successful serdes power up if
stmmac_hw_setup() or stmmac_request_irq() fails.
stmmac_resume() is also missing cleanup of the serdes power up if
stmmac_hw_setup() fails.
Add the missing cleanups.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDo-00000007Xx9-3RZ8@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
