Commit 1892bf9067 ("USB: usb-storage: Fix use of bitfields for
hardware data in ene_ub6250.c") converted the media status fields from
bitfields to bit masks.
The original ene_transport() test called ene_init() only when neither
media type was ready:
!(sd_ready || ms_ready)
The converted test became:
!sd_ready || ms_ready
This is not equivalent. Restore the original semantics by testing that
both ready bits are clear before calling ene_init().
Fixes: 1892bf9067 ("USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/F42641386E32404F+20260626070607.4119527-1-raoxu@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Move kref_get() into the successful-open branch.
Fixes: e8d5f92b8d ("usb: gadget: function: printer: fix use-after-free in __lock_acquire")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/80295742B820DA9B+20260626064617.4090626-1-raoxu@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vep_alloc_request() wasn't initializing vrequest->udc, so cancellations
on the FunctionFS AIO path were arriving in vep_dequeue without a valid
UDC reference.
Since vrequest->udc is never actually properly used anywhere, we opt to
remove it, and update vep_dequeue to obtain a reference to the udc with
ep_to_vudc(), consistent with the other vep_ ops.
AFAICT this bug has existed for ~10 years. Seems that nobody has really
stressed the FunctionFS AIO path on usbip's vudc.
I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints
via AIO. Before the fix, running `usbip attach` from the host would
cause the guest to oops with the following backtrace:
Call trace:
vep_dequeue+0x1c/0xe4 (P)
usb_ep_dequeue+0x14/0x20
ffs_aio_cancel+0x24/0x34
__arm64_sys_io_cancel+0xb0/0x124
do_el0_svc+0x68/0x100
el0_svc+0x18/0x5c
el0t_64_sync_handler+0x98/0xdc
el0t_64_sync+0x154/0x158
Assisted-by: opencode:openai/gpt-5.5
Cc: stable <stable@kernel.org>
Fixes: b6a0ca1118 ("usbip: vudc: Add UDC specific ops")
Reviewed-by: Igor Kotrasinski <i.kotrasinsk@samsung.com>
Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260626-usbip-vudc-deque-fix-v3-1-98c2dc4d6a48@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB devices running at SuperSpeedPlus report "10000" or "20000" in
their sysfs speed attribute. usbip currently maps only "5000" to
USB_SPEED_SUPER, so a SuperSpeedPlus device is imported as
USB_SPEED_UNKNOWN.
The attach request is then rejected by vhci_hcd:
vhci_hcd: Failed attach request for unsupported USB speed: UNKNOWN
Map the SuperSpeedPlus sysfs speed values to USB_SPEED_SUPER_PLUS, use
the SuperSpeed VHCI hub for SuperSpeedPlus devices, and recognize the
gadget current_speed string used by the kernel.
Fixes: b2316645ca ("usb: show speed "10000" in sysfs for USB 3.1 SuperSpeedPlus devices")
Cc: stable <stable@kernel.org>
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/00C828F338E43447+20260617020613.199086-1-chenyichong@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the UCSI Specification Revision 3.1 RC1, bits 32-63 of the SET_NEW_CAM
command hold the 32-bit Alternate Mode Specific (AMSpecific) field.
For DisplayPort Alternate Mode, this field must contain the full
32-bit DisplayPort configuration VDO payload that the OPM wants the
connector to operate in, rather than just the pin assignment value.
This AMSpecific value follows the DisplayPort Configurations defined
in the DisplayPort Alt Mode on USB Type-C Specification v2.1a,
Table 5-13: SOP DisplayPort Configurations.
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Madhu M <madhu.m@intel.com>
Reviewed-by: Jameson Thies <jthies@google.com>
Reviewed-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260619153311.3526083-1-madhu.m@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Branch Sampling (BRS) and Last Branch Record (LBR) are mutually
exclusive hardware features, and users of both are tracked via
cpuc->lbr_users.
When SVM is toggled on a CPU, the host perf events are reprogrammed to
update the HostOnly filter bit (set when virtualization is enabled,
cleared when it is disabled). On PerfMonV2-capable processors, this
reprogramming is performed by calling amd_pmu_enable_all() to rewrite
the event selectors. However, amd_pmu_enable_all() also calls
amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0.
Having active LBR events satisfies this gating on processors that have
LBR but not BRS. The kernel then tries to set the BRS enable bit in
DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such
hardware, the write results in a #GP:
Call Trace:
<IRQ>
amd_pmu_enable_all+0x1d/0x90
amd_pmu_disable_virt+0x62/0xb0
kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm]
hardware_disable_nolock+0x1a/0x30 [kvm]
__flush_smp_call_function_queue+0x9b/0x410
__sysvec_call_function+0x18/0xc0
sysvec_call_function+0x69/0x90
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
RIP: 0010:cpuidle_enter_state+0xc4/0x450
? cpuidle_enter_state+0xb7/0x450
cpuidle_enter+0x29/0x40
cpuidle_idle_call+0xf5/0x160
do_idle+0x7b/0xe0
cpu_startup_entry+0x26/0x30
start_secondary+0x115/0x140
secondary_startup_64_no_verify+0x194/0x19b
</TASK>
Fix this by ensuring that BRS is not enabled from the event selector
reprogramming path even when cpuc->lbr_users > 0.
Fixes: bae19fdd7e ("perf/x86/amd/core: Fix reloading events for SVM")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/702fa204d574b03d14e3664c7d4b201db048bbfd.1783506528.git.sandipan.das@amd.com
Currently, configuring a VF MAC address via the PF (e.g., 'ip link
set <pf> vf 0 mac <mac>') blindly attempts to install a DMAC-based
hardware filter. However, the hardware parser profile might not
support DMAC extraction.
Check if the hardware parsing profile supports DMAC extraction
before adding the filter. Additionally, emit a warning message
to inform the operator if the MAC filter installation fails due
to missing DMAC extraction support. Update config->mac only
after hardware programming succeeds in otx2_set_vf_mac().
Fixes: f0c2982aaf ("octeontx2-pf: Add support for SR-IOV management functions")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260702033451.2969880-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
CAKE accepts signed overhead values and stores them in an s16, but the
adjusted packet length calculation uses unsigned arithmetic. A negative
effective length can therefore wrap to a large value.
Such configurations make rate accounting depend on integer wraparound
rather than on the packet size userspace intended to model. A static
netlink lower bound is not enough because packets reaching CAKE can be
smaller than any reasonable manual-overhead allowance.
Fold the signed overhead adjustment into the existing datapath MPU clamp
so negative adjusted lengths are clamped before link-layer framing
adjustments.
Fixes: a729b7f0bd ("sch_cake: Add overhead compensation support to the rate shaper")
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260702000758.297407.e5c888d9d99d.cake-overhead-underflow@trailofbits.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
REGMAP_MMIO is a hidden (non-user-visible) tristate symbol. Using
depends on it is incorrect because there is no way for the user to
enable it directly. Change to select, which is the convention used
by every other driver in the tree that needs REGMAP_MMIO.
Fixes: 8057cbb833 ("net: mdio: mscc-miim: Add depend of REGMAP_MMIO on MDIO_MSCC_MIIM")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260702032653.1580616-1-rosenp@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit c7f92042d3 ("selftests: gpio: Add gpio-cdev-uaf tests") added
the gpio-cdev-uaf binary to TEST_GEN_PROGS_EXTENDED but never added it
to .gitignore. Building it with:
make -C tools/testing/selftests/gpio TARGETS=gpio
leaves gpio-cdev-uaf as an untracked file.
Fixes: c7f92042d3 ("selftests: gpio: Add gpio-cdev-uaf tests")
Signed-off-by: Cihan Karadag <cihan.cihan@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260707235707.1349969-1-cihan.cihan@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
RISCV_HWPROBE_EXT_ZICFISS and RISCV_HWPROBE_EXT_ZICFILP are defined in
the hwprobe uAPI but are not documented in
Documentation/arch/riscv/hwprobe.rst. Add documentation for them.
Link: 302a2d45c2
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Guodong Xu <docular.xu@gmail.com>
Link: https://patch.msgid.link/20260701-rva23u64-hwprobe-v2-v5-3-2c61f94a695a@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
A handful of vendor-extension entries indent continuation lines with a
tab character, while the rest of hwprobe.rst uses spaces. In addition,
many list items align their continuation lines under the 'm' of
':c:macro:' (column 7) rather than under the item text (column 4), so
the file mixes several indentation styles.
Replace the tabs with spaces and align every list item's continuation
lines under the item text, giving the whole file one consistent style.
Whitespace-only change, no functional change.
[Guodong: extend from tabs->spaces to normalizing all continuation-line
indentation across the file]
Signed-off-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Guodong Xu <docular.xu@gmail.com>
Link: https://patch.msgid.link/20260701-rva23u64-hwprobe-v2-v5-2-2c61f94a695a@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The multi-letter extension enum is documented as being sorted
alphanumerically (see the "multi-letter extensions, sorted
alphanumerically" comment), but several Z entries have drifted out of
order.
Reorder the affected entries so the multi-letter Z list is sorted
alphanumerically again.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guodong Xu <docular.xu@gmail.com>
Link: https://patch.msgid.link/20260701-rva23u64-hwprobe-v2-v5-1-2c61f94a695a@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Commit 91842ed844 ("ata: libata-core: Set capacity to zero for a
security locked drive") introduced setting the device capacity (n_sectors)
to zero in ata_dev_configure() if the drive is security locked.
However, during runtime revalidation, ata_dev_revalidate() compares the
new capacity (now 0) with the old capacity (>0) and detects a mismatch.
Since it does not consider the locked status, it returns -ENODEV.
This revalidation failure can occur when doing a reset of the PHY (e.g.
hard reset) for a controller that has I/Os in flight. The timed out
I/Os trigger the SCSI Error Handling (EH) path, which in turn invokes
libata device revalidation. If the drive is locked at runtime (e.g.
it lost power during reset and relocked), revalidation sees the capacity
transition to zero and fails, eventually disabling the device.
Fix this by allowing the capacity transition to zero in
ata_dev_revalidate() if the drive is reported as security locked by
ata_id_is_locked().
Fixes: 91842ed844 ("ata: libata-core: Set capacity to zero for a security locked drive")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Terrence Adams <tadamsjr@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Skip HPA resize in ata_hpa_resize() if the drive is security locked.
If the drive is locked, the command to read the native max address
fails with -EACCES, which currently causes the sticky quirk
ATA_QUIRK_BROKEN_HPA to be set on the device.
Setting this sticky quirk causes subsequent revalidations (after the
drive is unlocked) to bypass HPA checks, preventing the unlocked drive
from exposing its full native capacity without a reboot or device removal.
Cc: stable@vger.kernel.org
Signed-off-by: Terrence Adams <tadamsjr@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Closing a BO handle clears abo->client, while the underlying GEM object
may remain alive due to internal kernel references. As a result, code
executed after the BO handle is closed may dereference a NULL abo->client
pointer.
Remove accesses to abo->client from code paths that may execute after the
BO handle has been closed.
Fixes: d76856beb4 ("accel/amdxdna: Refactor GEM BO handling and add helper APIs for address retrieval")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707201556.562191-1-lizhi.hou@amd.com
The return value of init_srcu_struct() is currently ignored. If
initialization fails, subsequent use of hwctx_srcu may result in invalid
memory accesses.
Check the return value of init_srcu_struct() and propagate the error to
the caller.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707172323.539721-1-lizhi.hou@amd.com
drmm_mutex_init() may fail and return an error. Check the return value
and abort initialization if mutex creation fails.
Fixes: 8c9ff1b181 ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707172307.539676-1-lizhi.hou@amd.com
The ptrace_v_not_enabled test expects the child to reach its ebreak
before it has used the vector extension. That is not guaranteed when
using fork(), because libc may run child atfork handlers before
returning to the test code. In those cases PTRACE_GETREGSET for
NT_RISCV_VECTOR then succeeds instead of returning ENODATA for
inactive vector state.
Use the raw clone syscall with SIGCHLD to keep fork-like semantics
while bypassing libc's fork wrapper and atfork handler chain.
Cc: Andy Chiu <tchiu@tenstorrent.com>
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Link: https://patch.msgid.link/20260707153827.175245-1-andrew.jones@oss.qualcomm.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object
from a userspace-supplied handle but never checks the result. A bogus
or stale handle makes drm_gem_object_lookup() return NULL, which is
then stored in info->indirect and only dereferenced later when the
indirect CSD job runs, turning a userspace mistake into a NULL pointer
dereference in the kernel.
Bail out with -ENOENT as soon as the lookup fails, so the bad handle is
rejected at submission time.
Fixes: 18b8413b25 ("drm/v3d: Create a CPU job extension for a indirect CSD job")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260703-v3d-cpu-job-fixes-v3-2-bc51b1f3eeb5@igalia.com
parse_synth_field() builds a "__data_loc ..." type string before
assigning it to field->type. If the seq_buf check fails, the common
cleanup cannot free the temporary string. Free it before leaving.
Link: https://patch.msgid.link/20260603062533.1096320-2-pengyu@kylinos.cn
Signed-off-by: Yu Peng <pengyu@kylinos.cn>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
user_event_mm_dup() walks the parent mm's enabler list locklessly under
rcu_read_lock() during fork() (from copy_process()); it does not take
event_mutex:
rcu_read_lock();
list_for_each_entry_rcu(enabler, &old_mm->enablers, mm_enablers_link)
enabler->event = user_event_get(orig->event);
user_event_enabler_destroy() removes an enabler from that list with
list_del_rcu() and then, without waiting for a grace period, drops the
enabler's user_event reference with user_event_put() and frees the enabler
with kfree(). A reader that loaded the enabler before the list_del_rcu()
can still be walking it, which leads to two use-after-frees:
- kfree(enabler) frees the enabler while that reader dereferences
enabler->event.
- user_event_put() may drop the last reference to the user_event, which
is then freed (via delayed_destroy_user_event() on a work queue), while
the same reader does user_event_get(orig->event) on it.
Both are reachable by an unprivileged task that can open user_events_data:
one multithreaded process that registers an enabler and then concurrently
unregisters it and calls fork() triggers the race. KASAN reports a
slab-use-after-free in user_event_mm_dup() during clone(), with a
"refcount_t: addition on 0" warning when the user_event is freed.
The enabler use-after-free was found first; the user_event one was reported
by XIAO WU, and the earlier enabler-only fix did not address it.
Defer both the user_event_put() and the kfree(enabler) to a work item
queued with queue_rcu_work(), so they run only after an RCU grace period,
once all readers walking the enabler list have finished. The put must run
in process context because user_event_put() takes event_mutex on the last
reference, so a work queue is used rather than call_rcu(). The now-unlocked
put lets the locked argument of user_event_enabler_destroy() be removed;
all callers are updated.
Fixes: 7235759084 ("tracing/user_events: Use remote writes for event enablement")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260707165912.2560537-2-michael.bommarito@gmail.com
Reported-by: XIAO WU <xiaowu.417@qq.com>
Closes: https://lore.kernel.org/all/tencent_89647CE40DC452B891C65C94D1B271DE8E07@qq.com/
Suggested-by: Beau Belgrave <beaub@linux.microsoft.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
PMFW reports the S0i3 subsystem accounting per SoC, and the set of IP
blocks and their bit ordering differ across SoC generations. Family
1Ah, Model 80h accounts for a distinct set of 19 IP blocks, which does
not match the ordering in soc15_ip_blk[].
Commit 043af31c8d ("platform/x86/amd/pmc: Add PMC driver support for
AMD 1Ah M80H SoC") wired amd_1ah_m80_cpu_info to soc15_ip_blk[], so
M80H has been reporting incorrect S0i3 accounting via debugfs.
Add soc15_ip_blk_v3[] with the correct ordering and point
amd_1ah_m80_cpu_info at it.
Fixes: 043af31c8d ("platform/x86/amd/pmc: Add PMC driver support for AMD 1Ah M80H SoC")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260707122852.2066987-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The previously integrated power limits for the ASUS ROG Strix G16 G614PR
laptop model were incorrect and too low compared to the windows counterparts.
Update the power limits to the correct specifications based on the
platform's hardware capabilities:
- Increase AC PL1/SPL max limit from 90W to 120W.
- Increase AC PL2/SPPT default/max from 110W/125W to 140W/145W.
- Increase AC PL3/FPPT default/max from 110W/125W to 140W/145W.
Fixes: 6b3bbe770f (platform/x86: asus-armoury: add support for G614PR)
Fixes: https://lore.kernel.org/platform-driver-x86/20260610152130.25892-1-scardracs@disroot.org/
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Link: https://patch.msgid.link/20260630142957.7751-1-scardracs@disroot.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
amdxdna_update_heap() iterates over hardware contexts while holding
xdna->dev_lock. During the iteration, amdxdna_pm_resume_get_locked() may
temporarily release and reacquire the lock, allowing hardware contexts to
be modified concurrently.
Fix the race by calling amdxdna_pm_resume_get_locked() before
iterating over hardware contexts.
Fixes: dbc8fd7a03 ("accel/amdxdna: Add expandable device heap support")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707055818.479165-1-lizhi.hou@amd.com
Both amdxdna_hwctx_sync_debug_bo() and amdxdna_drm_config_hwctx_ioctl()
hold xdna->dev_lock while invoking backend operations. If the hardware
hangs, aie2_cmd_wait() blocks waiting for a firmware response. When the
DRM scheduler timeout expires, aie2_sched_job_timedout() is invoked to
reset the hardware. However, the timeout handler also attempts to acquire
dev_lock, resulting in a deadlock.
Avoid this by releasing dev_lock before waiting for the firmware
response and reacquiring it after the wait completes. This allows the
timeout handler to proceed with device recovery when a debug BO command
times out.
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707055732.479103-1-lizhi.hou@amd.com
amdxdna_gem_obj_open() increments open_ref before attempting to set up
the DMA address mapping. When amdxdna_dma_map_bo() fails, the function
returned immediately without rolling back either change made on the first
open (open_ref == 1 path).
Fix it by decrementing open_ref and clearing abo->client on the error path.
Fixes: ece3e89809 ("accel/amdxdna: Allow forcing IOVA-based DMA via module parameter")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260707055658.479049-1-lizhi.hou@amd.com
amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove()
before removing the object from abo->mem.umap_list. If
aie2_populate_range() runs concurrently, it may obtain a reference to an
amdxdna_umap that is being released, leading to a potential use-after-free.
Use kref_get_unless_zero() in aie2_populate_range() when acquiring a
reference. If the reference count has already dropped to zero, release
is in progress and the entry is skipped.
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260706221228.434099-1-lizhi.hou@amd.com
Revert
99cf1fb58e ("x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN").
Section 8.8 of the SNP spec says:
Before invoking SNP_INIT_EX with INIT_RMP set to 1, software must ensure
that no CPUs contain dirty cache lines for the memory containing the RMP.
Cachelines can be moved from cache to cache in a dirty state. The
wbinvd_on_all_cpus() before SNP_INIT_EX flushes the caches for each CPU, but
if the IPIs for WBINVD race with this dirty cacheline movement, it is possible
that they may not get flushed, violating the firmware requirement.
Doing wbinvd_on_all_cpus() before setting SNPEn is safer since the RMP
table is not yet in use.
[ Heroically bisected by Srikanth. ]
[ bp: Massage commit message. ]
Fixes: 99cf1fb58e ("x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN")
Reported-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Srikanth Aithal <Srikanth.Aithal@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20260707150033.2364758-1-tycho@kernel.org
At the moment, concurrent writes from userspace and the kernel to the
console can trigger a race condition that results in an infinite loop of
the same messages printed over and over again. This is most likely to
happen during system startup or shutdown when the init system starts/stops
a large number of system services that interact with various kernel code.
When userspace writes to the TTY device, the driver initiates an
asynchronous DMA transfer and releases the port lock. At the same moment,
the kernel printk path might grab the port lock and re-configure the UART
controller for PIO, without waiting for the DMA operation to complete. It
seems like this collision results in zero progress being reported for the
DMA engine, so the same text is printed to the console over and over again.
For the kernel console, we want a reliable output path that will be
functional even during crashes etc. So rather than implementing complex
code to synchronize the kernel console write routines with the userspace
DMA write routines, simply disable DMA for the console UART instance.
Similar checks exist in many other serial drivers, e.g. 8250_port.c,
imx.c, sh-sci.c etc.
Cc: stable <stable@kernel.org>
Fixes: 3a878c430f ("tty: serial: msm: Add TX DMA support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-serial-msm-console-dma-collision-v1-1-3179b8cb1d89@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's strongly recommended for GPIO drivers to always implement the
.get_direction() callback - even when the direction is tracked in
software. The GPIO core emits a warning when the callback is missing
and a user reads the direction of a line, e.g. via
/sys/kernel/debug/gpio.
The MAX310X keeps the GPIO direction in the GPIOCFG register (a set bit
selects output), which the existing direction_input/output callbacks
already program, so the current direction can be read back directly.
Fixes: f65444187a ("serial: New serial driver MAX310X")
Cc: stable <stable@kernel.org>
Signed-off-by: Tapio Reijonen <tapio.reijonen@vaisala.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260615-b4-serial-max310x-gpio-get-direction-v2-1-4704ba2b181a@vaisala.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some multi GPU systems may have a VGA compatible device, but that might not be
used for display. If due to enumeration order this device is found before the
one actually used for display then multiple devices may show the boot_display
attribute, confusing userspace.
When screen info is valid, use it exclusively to find the primary device so
that only the device backing the framebuffer is reported. Only when no
framebuffer has been set up does it make sense to fall back to the default VGA
device. This ensures at most one primary graphics device, preferably the one
with the framebuffer.
Fixes: ad90860bd1 ("fbcon: Use screen info to find primary device")
Closes: https://lore.kernel.org/linux-pci/20260618081803.2790848-1-aaron.ma@canonical.com/#t
Reported-by: Aaron Ma <aaron.ma@canonical.com>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20260623141505.1816786-1-mario.limonciello@amd.com
Tracepoints require that RCU is watching. To prevent them from being used
in places that RCU is not watching, the trace_##event() macro always
calls rcu_is_watching() even when the event is not enabled and warns if
RCU is not watching. This is to make sure a warning is triggered even if
the tracepoint is never enabled (as it is only a bug when it is).
It was noticed that tracepoints could be hidden within
trace_#event#_enabled() calls, which are used to do extra work for the
tracepoint only if the tracepoint is enabled. But this also can hide the
fact that a tracepoint is placed in a location that can be called when RCU
is not watching.
Commit 9764e731ef ("tracepoint: Add lockdep rcu_is_watching() check to
trace_##name##_enabled()") added a check to the trace_##event##_enabled()
macro to make sure RCU is watching when it is called to make sure not to
hide the bug of a tracepoint being called when RCU is not watching.
There is one case in the irq_disable tracepoint where it is within a
trace_irq_disable_enabled() block, but it checks if RCU is watching, and
if it isn't, it makes a call to ct_irq_enter() that makes RCU watch again.
But because trace_irq_disable_enabled() now checks if RCU is watching and
will trigger if it isn't. This is a false warning as the code within
the block handles this case.
Add a new internal macro __trace_##event##_enabled() that doesn't check if
RCU is watching, and convert the irq_enable/disable tracepoints over to
it.
Link: https://patch.msgid.link/20260701132744.6a7fc68b@robin
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdXud_RpWag_hFqa2ByBGRxg6KnxGL1ObCWZrpTsk3TfAw@mail.gmail.com/
Fixes: 9764e731ef ("tracepoint: Add lockdep rcu_is_watching() check to trace_##name##_enabled()")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
String event fields are not necessarily NUL-terminated, so the filter
predicate functions (filter_pred_string(), filter_pred_strloc() and
filter_pred_strrelloc()) pass the field length to the regex match
callbacks, and the length-aware matchers honour it.
regex_match_glob() was the exception: it ignored the length and called
glob_match(), which scans the string until it hits a NUL byte. Some
string fields are not NUL-terminated. One example is the dynamic char
array of the xfs_* namespace tracepoints, which is copied without a
trailing NUL. For such a field, glob matching reads past the end of
the event field, causing a KASAN slab-out-of-bounds read in
glob_match(), reached via regex_match_glob() and filter_match_preds()
from the xfs_lookup tracepoint.
Add a length-bounded glob_match_len() and use it from regex_match_glob()
so glob matching always stops at the field boundary. The matching loop
is factored into a shared helper so glob_match() keeps its behaviour.
Fixes: 60f1d5e3ba ("ftrace: Support full glob matching")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/da1aaf125fc3b63320b0c540fd6afa7c3d5b4f1a.1782836943.git.hhhuang@smu.edu.sg
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace events in drivers/ufs/core/ufs_trace.h were converted to take a
pointer to the hba structure as an argument for the tracepoint and then in
TP_printk() the printing of the dev_name from the ring buffer was
converted to using the dev dereferenced pointer from the hba saved
pointer.
This is not allowed as the TP_printk() is executed at the time the trace
event is read from /sys/kernel/tracing/trace file. That can happen
literally, seconds, minutes, hours, weeks, days, or even months later!
There is no guarantee that the hba pointer will still exist by the time it
is dereferenced when the "trace" file is read.
Instead, save the device name from the hba pointer at the time the
tracepoint is called and place it into the ring buffer event. Then the
TP_printk() can read the name directly from the ring buffer and remove the
possibility that it will read a freed pointer and crash the kernel.
This was detected when testing the trace event code that looks for
TP_printk() parameters doing illegal derferences[1]
[1] https://lore.kernel.org/all/20260630184836.74d477b6@gandalf.local.home/
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260630185412.283c26c5@gandalf.local.home
Fixes: 583e518e71 ("scsi: ufs: core: Add hba parameter to trace events")
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
func_set_flag() dereferences tr->current_trace_flags before verifying
that the current tracer is actually the function tracer. When the active
tracer has been switched away from "function" (e.g., to "wakeup_rt"),
tr->current_trace_flags can be NULL, leading to a NULL pointer
dereference and kernel crash.
The call chain that triggers this is:
trace_options_write()
-> __set_tracer_option()
-> trace->set_flag() /* func_set_flag */
In func_set_flag(), the first operation is:
if (!!set == !!(tr->current_trace_flags->val & bit))
This dereferences tr->current_trace_flags unconditionally. The safety
check that guards against a non-function tracer:
if (tr->current_trace != &function_trace)
return 0;
is placed *after* the dereference, which is too late.
This was observed with the following crash dump:
BUG: unable to handle page fault at 0000000000000000
RIP: func_set_flag+0xd
Call Trace:
__set_tracer_option+0x27
trace_options_write+0x75
vfs_write+0x12a
ksys_write+0x66
do_syscall_64+0x5b
RIP: ffffffff914c973d RSP: ff67ec88b01dfdf0 RFLAGS: 00010202
RAX: 0000000000000000 RBX: ff3a826e80354580 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff93918080
The disassembly confirms the fault:
func_set_flag+0: mov 0x1f08(%rdi), %rax ; RAX = tr->current_trace_flags = NULL
func_set_flag+13: mov (%rax), %eax ; page fault: dereference NULL
At the time of the crash:
tr->current_trace_flags = 0x0 (NULL)
tr->current_trace = wakeup_rt_tracer (not function_trace)
The scenario is that a process opens a function tracer option file (such
as "func_stack_trace"), then the current tracer is switched to another
tracer (e.g., "wakeup_rt"), which sets current_trace_flags to NULL. When
the process subsequently writes to the option file, func_set_flag() is
invoked and crashes on the NULL dereference.
Fix this by moving the current_trace check before the
current_trace_flags dereference, so that func_set_flag() returns early
when the function tracer is not active.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260624061715.1445655-1-xiangzao@linux.alibaba.com
Fixes: 76680d0d28 ("tracing: Have function tracer define options per instance")
Signed-off-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracepoint_printk symbol is not exported, so make it
static to remove the following sparse warning:
kernel/trace/trace.c:90:5: warning: symbol 'tracepoint_printk' was not declared. Should it be static?
Fixes: dd293df639 ("tracing: Move trace sysctls into trace.c")
Link: https://patch.msgid.link/20260617105822.904164-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 8928e4a3be ("ring-buffer: Show persistent buffer dropped events
in trace_pipe file") split the "commit" variable in
ring_buffer_read_page() into "commit" (raw) and "size" (masked page
size), but the inner copy loop's terminator was changed to compare rpos
against "event_size" instead of "size".
rpos is the cumulative read offset within the page; event_size is the
length of the single event just copied. The loop thus breaks after the
first event, so only one event is copied per call. This regresses the
per-event memcpy path (partial reads, the active commit page, and
mapped/remote buffers) used by splice/trace_pipe_raw and mmap consumers
into a one-event-at-a-time read.
Compare rpos against the page size as the original code did.
Link: https://patch.msgid.link/20260616175538.111628-1-devnexen@gmail.com
Fixes: 8928e4a3be ("ring-buffer: Show persistent buffer dropped events in trace_pipe file")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The client cap is currently advertised unconditionally, even for drivers
that do not support plane color pipelines. If clients supporting the latter,
like Wayland compositors or tools like drm_info, enable the client cap on
such drivers they will be left without both color pipeline and the legacy
properties COLOR_ENCODING and COLOR_RANGE, effectively breaking YUV->RGB
conversion support.
Prevent that by only marking the cap supported if there are actually planes
with color pipelines.
Note: while the color pipeline replacement for the legacy properties is
still under review (1), we can assume that it will work as a drop-in
replacement. That means any plane on any hardware currently supporting
the legacy properties will be able to offer a functionally equal color
pipeline and there will be no technical reason keep using the legacy
properties if both the driver and the client support the new API.
[1] https://lore.kernel.org/dri-devel/20260623164812.81110-1-harry.wentland@amd.com/
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Fixes: 179ab8e7d7 ("drm/colorop: Introduce DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE")
Link: https://patch.msgid.link/20260703073230.19982-1-robert.mader@collabora.com
Suggested-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
GPIO interrupts may retain stale state across warm reboots when
peripherals remain powered. If a GPIO line is not explicitly
configured for interrupts, this can result in interrupt storms
due to missing handlers.
Fix this by ensuring all interrupts are masked and disabled at
hardware initialization time via the init_hw() callback. Pending
interrupts are also cleared to start from a known-safe state.
Interrupts will be unmasked only when explicitly configured by
userspace or kernel drivers.
Signed-off-by: Liang Hao <haohlliang@gmail.com>
Link: https://patch.msgid.link/20260705074759.47863-1-haohlliang@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
GPIO consumers such as gpio-keys can enable IRQ wake and adjust the wake
trigger type from their suspend callbacks. If the DWAPB controller suspends
first, masking interrupts and disabling its clocks in the normal suspend
phase prevents that late wake configuration from reliably reaching the
hardware. Systems with real DWAPB bus clocks then fail to wake from s2idle
through GPIO keys.
Save the register context in the normal suspend callback, but defer IRQ
masking and clock gating until suspend_noirq. At that point all consumers
have finished configuring wake IRQs, so keep the clocks enabled when wake
lines are armed and only gate them when no wake source is active.
Resume_noirq reenables clocks, if they were gated, before the normal resume
path restores registers.
Propagate wake requests to the parent irqchip while keeping the local wake
mask in sync with failures.
Fixes: 6437c7ba69 ("gpio: dwapb: Add wakeup source support")
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Link: https://patch.msgid.link/20260702-gpio-dwapb-wakeup-v2-1-203f2f33429f@ultrarisc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Three IE/attribute parsing functions have missing bounds checks.
rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer
without verifying that the header bytes (tag + length) are within the
remaining buffer before reading them. Additionally, rtw_get_sec_ie()
compares the 4-byte WPA OUI at cnt+2 without checking that at least
6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at
cnt+6 without checking that at least 10 bytes remain.
rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at
entry, before verifying that wps_ielen is large enough to contain
the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside
the attribute loop, get_unaligned_be16() is called on attr_ptr and
attr_ptr+2 without checking that 4 bytes remain in the buffer.
Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie()
and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum
IE length requirement, add a wps_ielen < 6 early return in
rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-8-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The loop in is_ap_in_tkip() iterates over IEs without verifying that
enough bytes remain before dereferencing the IE header or its payload:
- pIE->element_id and pIE->length are read without checking that
i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the
buffer causes an OOB read.
- For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12,
which requires pIE->length >= 16. For WLAN_EID_RSN it compares
pIE->data + 8, requiring pIE->length >= 12. Neither requirement
is checked.
Add the missing IE header and payload bounds checks and guard each
data access with an explicit pIE->length minimum, matching the
pattern established in update_beacon_info().
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-7-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each
iteration but only guards on i < pkt_len. When a malicious AP sends an
AssocResponse whose last IE has only one byte remaining in the frame
(the element_id byte lands at pkt_len-1), the loop reads pIE->length
from pframe[pkt_len], which is one byte past the allocated receive buffer.
Additionally, even when the header bytes are in bounds, pIE->length
itself can extend the data window beyond pkt_len, silently passing a
truncated IE to the handler functions.
Add two guards at the top of the loop body:
1. Break if fewer than sizeof(*pIE) bytes remain (can't read header).
2. Break if the IE's declared data extends past pkt_len.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260522004531.1038924-6-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HT_caps_handler() iterates pIE->length bytes and writes into
HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct
HT_caps_element). Because pIE->length is a raw u8 from an over-the-air
802.11 AssocResponse frame and is never validated, a malicious AP can
set it up to 255, causing up to 229 bytes of out-of-bounds writes into
adjacent fields of struct mlme_ext_info.
Truncate the iteration count to the size of HT_caps.u.HT_cap using
umin() so that data from a longer-than-expected IE is silently ignored
rather than written out of bounds, preserving interoperability with APs
that pad the element. An early return on oversized IEs was considered
but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1
assignment that precedes the loop, silently disabling HT mode for APs
that append extra bytes to the HT Capabilities IE.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Link: https://patch.msgid.link/20260522004531.1038924-5-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
supplicant_ie is a 256-byte array in struct security_priv. The WPA and
WPA2 IE copy paths use:
memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2);
where wpa_ielen is the raw IE length field (u8, 0-255). When a local user
supplies a connect request via nl80211 with a crafted WPA IE of length 255,
wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into
the adjacent last_mic_err_time field.
rtw_parse_wpa_ie() does not prevent this: its length consistency check
compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255
when wpa_ie_len = 257, so the check passes silently.
Add explicit bounds checks for both the WPA and WPA2 paths before the
memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the
supplicant_ie buffer.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-4-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two IE parsing loops are missing the header bounds checks before they
dereference pIE->length:
- issue_assocreq() walks pmlmeinfo->network.ies to build the
association request. If the stored IE data ends with only an
element_id byte and no length byte, pIE->length is read one byte
past the end of the buffer.
- join_cmd_hdl() walks pnetwork->ies during station join and has
the same problem under the same conditions.
Both buffers are filled from AP beacon and probe-response frames, so a
malicious AP that sends a truncated final IE can trigger the issue.
Apply the two-guard pattern established in update_beacon_info():
1. Break if fewer than sizeof(*pIE) bytes remain.
2. Break if the IE's declared data extends past the buffer end.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Luka Gejak <luka.gejak@linux.dev>
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260522004531.1038924-3-hossu.alexandru@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
