CSI lanes are double-clocked so with a single lane at 400MHZ the resulting
pixel-rate for 10-bits pixels is 400 MHz * 2 / 10 = 80 MHz, not 40 MHz.
This also matches with the observed frame-rate of 60 fps with the default
vblank setting: 80000000 / (1488 * 896) = 60.
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
During sensor calibration I noticed that with the hflip control set
to false/disabled the image was mirrored.
So it seems that the horizontal flip control is inverted and needs to
be set to 1 to not flip (just like the similar problem recently fixed
on the ov08x40 sensor).
Invert the hflip control to fix the sensor mirroring by default.
As the comment above the newly added OV01A10_MEDIA_BUS_FMT define explains
the control being inverted also means that the native Bayer-order of
the sensor actually is GBRG not BGGR, but so as to not break userspace
the Bayer-order is kept at BGGR.
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Implement internal buffer count and size calculations for AV1 decoder
for all the buffer types required by the AV1 decoder, including BIN,
COMV, PERSIST, LINE, and PARTIAL.
This ensures the hardware decoder has properly allocated memory for AV1
decoding operations, enabling correct AV1 video playback.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Defining platform specific capabilities specific to AV1 decoder.
Set and subscribe to manadatory properties to firmware for AV1.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Extend iris decoder driver to support format V4L2_PIX_FMT_AV1.
This change updates the format enumeration (VIDIOC_ENUM_FMT)
and allows setting AV1 format via VIDIOC_S_FMT for gen2 and beyond.
Gen1 iris hardware decoder does not support AV1 format.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a descriptive string for the AV1 pixel format to v4l_fill_fmtdesc(),
enabling proper reporting of AV1 support via VIDIOC_ENUM_FMT.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Introduce a new pixel format, V4L2_PIX_FMT_AV1, to the
Video4Linux2(V4L2) API. This format is intended for AV1
bitstreams in stateful decoding/encoding workflows.
The fourcc code 'AV10' is used to distinguish
this format from the existing V4L2_PIX_FMT_AV1_FRAME,
which is used for stateless AV1 decoder implementation.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This reverts commit 27ccc44a51.
A user has reported that the Zoom Video Conferencing tool is not capable
of handling invalid frames. Due to this, he has to continue using this
parameter.
We will keep working with Zoom so they can handle invalid frames
correctly, but for this cycle the safest option is to revert this
parameter drop.
Fixes: 27ccc44a51 ("media: uvcvideo: Remove nodrop parameter")
Reported-by: Ralf Jung <post@ralfj.de>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1121718
Closes: https://lore.kernel.org/linux-media/uboug5ectzm4s32yfgopjbcxq2uhsoc4kluaby7a4b7nzfjave@boco7oocnftr/
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add release_mem_region() if ioremap() fails to release the memory
region obtained by cx25821_get_resources().
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
tegra20_vip_soc is shared across translation units but is currently
declared via an extern in vip.c. Move the declaration to vip.h so users get
it via the header and we avoid extern declarations in .c files, matching
the pattern already used by tegra20_vi_soc and tegra210_vi_soc.
Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sparse warns that tegra210_csi_soc is not declared in tegra210.c.
The symbol is referenced from csi.c, so it must remain global. Move the
declaration to csi.h so users see it via the header and avoid extern
declarations in .c files.
SPARSE: drivers/staging/media/tegra-video/tegra210.c:1214:28: warning:
symbol 'tegra210_csi_soc' was not declared. Should it be static?
No functional change intended.
Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org
Fixes: a000e9a02b ("[media] tw9906: add Techwell tw9906 video decoder")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In one of the error paths in tw9903_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org
Fixes: 0890ec19c6 ("[media] tw9903: add new tw9903 video decoder")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When pvr2_send_request_ex() submits a write URB successfully but fails to
submit the read URB (e.g. returns -ENOMEM), it returns immediately without
waiting for the write URB to complete. Since the driver reuses the same
URB structure, a subsequent call to pvr2_send_request_ex() attempts to
submit the still-active write URB, triggering a 'URB submitted while
active' warning in usb_submit_urb().
Fix this by ensuring the write URB is unlinked and waited upon if the read
URB submission fails.
Reported-by: syzbot+405dcd13121ff75a9e16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=405dcd13121ff75a9e16
Signed-off-by: Szymon Wilczek <szymonwilczek@gmx.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
Link: https://github.com/ClangBuiltLinux/linux/issues/2144 [1]
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix checkpatch warning for is_tw286x]
Downstream version of RK3588 U-Boot uses customized TF-A that remaps
HDMIRX hardware interrupt, routing it via firmware that isn't supported
by upstream driver.
Detect broken interrupt and print a clarifying error message about a need
to use open-source TF-A with this driver.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In error path, add cx25821_alsa_dma_unmap() to release the
resource acquired by cx25821_alsa_dma_map()
Fixes: 8d8e6d6005 ("[media] cx28521: drop videobuf abuse in cx25821-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In error path, add cx23885_alsa_dma_unmap() to release the
resource acquired by cx23885_alsa_dma_map().
Fixes: 9529a4b0cf ("[media] cx23885: drop videobuf abuse in cx23885-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In error path, add cx88_alsa_dma_unmap() to release
resource acquired by cx88_alsa_dma_map().
Fixes: b2c75abde0 ("[media] cx88: drop videobuf abuse in cx88-alsa")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized.
Reported-by: syzbot+a41b73dce23962a74c72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a41b73dce23962a74c72
Fixes: 1bf20c3a0c ("[media] radio-keene: add a driver for the Keene FM Transmitter")
Cc: stable@vger.kernel.org
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The ADV7280-M may internally convert interlaced video input to
progressive video. If this mode is enabled, the ADV7280-M delivers
progressive video frames at the field rate of 50 fields per second (PAL)
or 60 fields per second (NTSC).
Fix the reported frame interval if progressive video is enabled.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The g_register and s_register callbacks are useful for debugging the
adv7180.
Implement the callbacks to expose the register debugging to userspace.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Depending on other devices on the i2c bus, using a non-default address
for the CSI and VPP devices may be necessary.
Replace calls to i2c_new_dummy_device with i2c_new_ancillary_device,
which can directly use an i2c address from the device tree.
Program the actual addresses of the sub-devices when configuring the
chip.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Different variants of the ADV7280 chip have up to three register maps.
The availability of the CSI and VPP register maps depends on the chip
variant. The address of the additional register maps depends on the
board design and other chips on the I2C but. They may be programmed via
registers in the main register map.
Allow to specify the addresses of the VPP and CSI register maps in the
device tree to solve I2C address conflicts on a board level.
The CSI and VPP register maps are always optional to allow backwards
compatibility with existing device trees which may rely on the default
address.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Dram hang could happen in the steps below:
1. start capture/compression
2. out-of-lock watchdog raise irq because of res-change.
3. aspeed_video_irq_res_change do clk-off
At step3, capture/compression could be not accomplished yet. If clk-off
in the middle of video operation, dram controller could hang at ast2500.
Use reset rather than clk-off/on to avoid this problem.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The state object allocated by __v4l2_subdev_state_alloc() must be freed
with __v4l2_subdev_state_free() when it is no longer needed.
In __tegra_channel_try_format(), two error paths return directly after
v4l2_subdev_call() fails, without freeing the allocated 'sd_state'
object. This violates the requirement and causes a memory leak.
Fix this by introducing a cleanup label and using goto statements in the
error paths to ensure that __v4l2_subdev_state_free() is always called
before the function returns.
Fixes: 56f64b8235 ("media: tegra-video: Use zero crop settings if subdev has no get_selection")
Fixes: 1ebaeb0983 ("media: tegra-video: Add support for external sensor capture")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Avoid 'strlen()'/'kmalloc()'/'snprintf()' sequence by using
the convenient 'kasprintf()' in 'v4l2_m2m_register_entity()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The existing 'dprintk' macro used an unwrapped 'if' statement which was
flagged by checkpatch, but instead of wrapping it, the debug handling
can be simplified.
This patch removes the 'dprintk' macro entirely and replaces all its
usages with v4l2_info() helper. The unused 'PREFIX' macro is also
removed.
Signed-off-by: Shrikant Raskar <raskar.shree97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Commit fbf97d6c1d ("dt-bindings: media: Convert MediaTek mt8173-mdp
bindings to DT schema") renames mediatek-mdp.txt to
mediatek,mt8173-mdp.yaml as part of this dt-binding conversion, but misses
to adjust the file entry in MEDIATEK MDP DRIVER.
Adjust the file entry after the conversion.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Intra_only frame could be considered as a key frame so Instantaneous
Decoding Refresh (IDR) flag must be set of the both case and not only
for key frames.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reported-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Fixes: 727a400686 ("media: verisilicon: Add Rockchip AV1 decoder")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Printing error messages on pm_runtime_put() returning negative values
is not particularly useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update mtk_vcodec_enc_pw_off() and mtk_vcodec_dec_pw_off()
to simply discard the return value of pm_runtime_put().
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
rga_get_frame() can return ERR_PTR(-EINVAL) when buffer type is
unsupported or invalid. rga_buf_init() does not check the return value
and unconditionally dereferences the pointer when accessing f->size.
Add proper ERR_PTR checking and return the error to prevent
dereferencing an invalid pointer.
Fixes: 6040702ade ("media: rockchip: rga: allocate DMA descriptors per buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The min_queued_buffers field controls when start_streaming() is called
by the vb2 core (it delays the callback until at least N buffers are
queued). Setting it to 1 affects the timing of start_streaming(), which
breaks the seek flow in decoder scenarios and causes test failures.
The current driver implementation does not rely on this minimum buffer
requirement and handles streaming start correctly with the default
value of 0, so remove these assignments.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Replace vmalloc/vfree with kmalloc/kfree for allocating small
driver structures (vpu_inst, vdec_t, venc_t, vpu_cmd_t, and
frame objects).
vmalloc() is designed for large memory allocations and incurs
unnecessary overhead for small objects due to virtual memory
mapping. kmalloc() is more appropriate as it allocates physically
contiguous memory with lower overhead.
ftrace measurements of vpu_alloc_cmd() show significant improvement:
Before (vmalloc): 35-72 us (avg ~45.7 us)
After (kmalloc): 11-26 us (avg ~16.8 us)
This reduces allocation time by approximately 63%.
No functional changes are intended.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
After encountering a colorspace change in the stream, the decoder
sends a V4L2_EVENT_SOURCE_CHANGE event with changes set to
V4L2_EVENT_SRC_CH_RESOLUTION.
Then the client can detect and handle the colorspace change without any
buffer reallocation
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The V4L2_DEC_CMD_START command may be used to handle the dynamic source
change, which will triggers an implicit decoder drain.
The last_buffer_dequeued flag is set in the implicit decoder drain,
so driver need to clear it to continue the following decoding flow.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If colorspace changes, the client needs to renegotiate the pipeline,
otherwise the decoded frame may not be displayed correctly.
So add colorspace as a trigger parameter for dynamic resolution change.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a v4l2 subdevice driver for the Omnivision OS05B10 sensor.
The Omnivision OS05B10 image sensor with an active
array size of 2592 x 1944.
The following features are supported:
- Manual exposure an gain control support
- vblank/hblank control support
- Supported resolution: 2592 x 1944 @ 60fps (SBGGR10)
Co-developed-by: Elgin Perumbilly <elgin.perumbilly@siliconsignals.io>
Signed-off-by: Elgin Perumbilly <elgin.perumbilly@siliconsignals.io>
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Samsung S5K3M5 (ISOCELL 3M5) is a 13MP image sensor, it produces
Bayer GRBG (2x2) frames in RAW10 output format, the maximum supported
output resolution is 4208x3120 at 30 frames per second.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for Samsung S5K3M5 image sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Samsung S5KJN1 is a 50MP image sensor, it produces Bayer GRBG (2x2)
frames in RAW10 output format, the maximum supported output resolution
is 8160x6144 at 10 frames per second.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for Samsung S5KJN1 image sensor.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
After kthread creation during probe sequence, a handful of other
failures could occur. If this were to happen, the kthread is never
explicitly deleted which results in a resource leak. Add explicit cleanup
of this resource.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
AV1 specification describes 3 possibles tx modes: 4x4 only, largest and
select. The hardware allows 5 possibles tx modes: 4x4 only, 8x8, 16x16,
32x32 and select. Since the both aren't exactly matching we need to add
a mapping function to set the correct mode on hardware.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: 727a400686 ("media: verisilicon: Add Rockchip AV1 decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If all the fields of the CDEF parameters are zero (which is the default),
then av1_enable_cdef register needs to be unset
(despite the V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF possibly being set).
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: 727a400686 ("media: verisilicon: Add Rockchip AV1 decoder")
Cc: stable@vger.kernel.org
Reported-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Closes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4786
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: dropped Link tag since it just duplicated the Closes: URL]
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
[ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out.
[ 110.583517] hantro-vpu 38310000.video-codec: bus error detected.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling.
Fixes: cb5dd5a0fa ("media: hantro: Introduce G2/HEVC decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
