dt-bindings: media: i2c: Add Samsung S5K3M5 image sensor

Add device tree bindings documentation for Samsung S5K3M5 image sensor.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Documentation/devicetree/bindings/media/i2c/samsung,s5k3m5.yaml

@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k3m5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K3M5 Image Sensor
+
+description:
+  Samsung S5K3M5 (ISOCELL 3M5) image sensor is a 13MP image sensor.
+  The sensor is controlled over a serial camera control bus protocol,
+  the widest supported output image frame size is 4208x3120 at 30 frames
+  per second, data output format is RAW10 transferred over 4-lane
+  MIPI D-PHY interface.
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: samsung,s5k3m5
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: MCLK supply clock.
+    maxItems: 1
+
+  reset-gpios:
+    description: Active low GPIO connected to RESET pad of the sensor.
+    maxItems: 1
+
+  afvdd-supply:
+    description: Autofocus actuator voltage supply, 2.8-3.0 volts.
+
+  vdda-supply:
+    description: Analogue voltage supply, 2.8 volts.
+
+  vddd-supply:
+    description: Digital core voltage supply, 1.05 volts.
+
+  vddio-supply:
+    description: Digital I/O voltage supply, 2.8 or 1.8 volts.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@10 {
+              compatible = "samsung,s5k3m5";
+              reg = <0x10>;
+              clocks = <&camera_mclk 0>;
+              assigned-clocks = <&camera_mclk 0>;
+              assigned-clock-rates = <24000000>;
+              reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+              vdda-supply = <&vreg_2p8>;
+              vddd-supply = <&vreg_1p05>;
+              vddio-supply = <&vreg_1p8>;
+
+              port {
+                  endpoint {
+                      link-frequencies = /bits/ 64 <602500000>;
+                      remote-endpoint = <&mipi_csi2_ep>;
+                  };
+              };
+          };
+      };
+...