Create a new helper function, nlmsg_payload(), to simplify checking and
retrieving Netlink message payloads.
This reduces boilerplate code for users who need to verify the message
length before accessing its data.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250414-nlmsg-v2-1-3d90cb42c6af@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dr. David Alan Gilbert says:
====================
qed deadcoding
This is a set of deadcode removals for the qed ethernet
device. I've tried to avoid removing anything that
are trivial firmware wrappers.
One odd one I've not removed is qed_bw_update(),
it doesn't seem to be called but looks like the only
caller of the bw_update(..) method which qedf does
define. Perhaps qed_bw_update is supposed to be called
somewhere?
====================
Link: https://patch.msgid.link/20250414005247.341243-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qed_db_recovery_dp() was added in 2018 as part of
commit 36907cd5cd ("qed: Add doorbell overflow recovery mechanism")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-6-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While most of the trace code is reachable by other routes
(I think mostly via the qed_features_lookup[] array), there
are a couple of unused wrappers.
qed_print_mcp_trace_line() and qed_print_mcp_trace_results_cont()
were added in 2018 as part of
commit a3f723079d ("qed*: Utilize FW 8.37.7.0")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-5-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qed_ptt_invalidate() was added in 2015 as part of
commit fe56b9e6a8 ("qed: Add module with basic common support")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-4-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qed_calc_session_ctx_validation() and qed_calc_task_ctx_validation()
were added as part of 2017's
commit da09091732 ("qed*: Utilize FW 8.33.1.0")
but have remained unused.
Remove them.
This leaves; con_region_offsets[], task_region_offsets[],
cdu_crc8_table and qed_calc_cdu_validation_byte() unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-3-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qed_memset_session_ctx() and qed_memset_task_ctx() were added in 2017
as part of
commit da09091732 ("qed*: Utilize FW 8.33.1.0")
but have not been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-2-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: various small and unrelated improvements
Here are various unrelated patches:
- Patch 1: sched: remove unused structure.
- Patch 2: sched: split the validation part, a preparation for later.
- Patch 3: pm: clarify code, not to think there is a possible UaF.
Note: a previous version has already been sent individually to Netdev.
- Patch 4: subflow: simplify subflow_hmac_valid by passing subflow_req.
- Patch 5: mib: add counter for MPJoin rejected by the PM.
- Patch 6: selftests: validate this new MPJoinRejected counter.
- Patch 7: selftests: define nlh variable only where needed.
- Patch 8: selftests: show how to use IPPROTO_MPTCP with getaddrinfo.
Note: a previous version has already been sent individually to Netdev.
v1: https://lore.kernel.org/20250411-net-next-mptcp-sched-mib-sft-misc-v1-0-85ac8c6654c3@kernel.org
====================
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-0-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_connect.c is a startup tutorial of MPTCP programming, however
there is a lack of ai_protocol(IPPROTO_MPTCP) usage. Add comment for
getaddrinfo MPTCP support.
This patch first uses IPPROTO_MPTCP to get addrinfo, and if glibc
version is too old, it falls back to using IPPROTO_TCP.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-8-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's strange that 'nlh' variable is set to NULL in get_mptcpinfo() and then
this NULL pointer is passed to recv_nlmsg(). In fact, this variable should
be defined in recv_nlmsg(), not get_mptcpinfo().
So this patch drops this useless 'nlh' parameter of recv_nlmsg() and define
'nlh' variable in recv_nlmsg().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-7-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parent commit adds this new counter, incremented when receiving a
connection request, if the PM didn't allow the creation of new subflows.
Most of the time, it is then kept at 0, except when the PM limits cause
the receiver side to reject new MPJoin connections. This is the case in
the following tests:
- single subflow, limited by server
- multiple subflows, limited by server
- subflows limited by server w cookies
- userspace pm type rejects join
- userspace pm type prevents mp_prio
Simply set join_syn_rej=1 when checking the MPJoin counters for these
tests.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-6-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This counter is useful to understand why some paths are rejected, and
not created as expected.
It is incremented when receiving a connection request, if the PM didn't
allow the creation of new subflows.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-5-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
subflow_hmac_valid() needs to access the MPTCP socket and the subflow
request, but not the request sock that is passed in argument.
Instead, the subflow request can be directly passed to avoid getting it
via an additional cast.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-4-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e4c28e3d5c ("mptcp: pm: move generic PM helpers to pm.c")
removed an unnecessary if-check, which resulted in returning a freed
pointer.
This still works due to the implicit boolean conversion when returning
the freed pointer from mptcp_remove_anno_list_by_saddr(), but it can be
confusing and potentially error-prone. To improve clarity, add a local
variable to explicitly return a boolean value instead.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-3-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new interface .validate has been added in struct bpf_struct_ops
recently. This patch prepares a future struct_ops support by
implementing it as a new helper mptcp_validate_scheduler() for struct
mptcp_sched_ops.
In this helper, check whether the required ops "get_subflow" of struct
mptcp_sched_ops has been implemented.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-2-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a follow-up of commit b68b106b0f ("mptcp: sched: reduce size
for unused data"), now removing the mptcp_sched_data structure.
Now is a good time to do that, because the previously mentioned WIP work
has been updated, no longer depending on this structure.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-1-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct Get Controller Packet Statistics (GCPS) 64-bit wide member
variables, as per DSP0222 v1.0.0 and forward specs. The Driver currently
collects these stats, but they are yet to be exposed to the user.
Therefore, no user impact.
Statistics fixes:
Total Bytes Received (byte range 28..35)
Total Bytes Transmitted (byte range 36..43)
Total Unicast Packets Received (byte range 44..51)
Total Multicast Packets Received (byte range 52..59)
Total Broadcast Packets Received (byte range 60..67)
Total Unicast Packets Transmitted (byte range 68..75)
Total Multicast Packets Transmitted (byte range 76..83)
Total Broadcast Packets Transmitted (byte range 84..91)
Valid Bytes Received (byte range 204..11)
Signed-off-by: Hari Kalavakunta <kalavakunta.hari.prasad@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Link: https://patch.msgid.link/20250410012309.1343-1-kalavakunta.hari.prasad@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch suggests the replacement of strncpy with strscpy
as per Documentation/process/deprecated.
The strncpy() fails to guarantee NULL termination,
The function adds zero pads which isn't really convenient for short strings
as it may cause performance issues.
strscpy() is a preferred replacement because
it overcomes the limitations of strncpy mentioned above.
Compile Tested
Signed-off-by: Kevin Paul Reddy Janagari <kevinpaul468@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Tested-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250411085010.6249-1-kevinpaul468@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Christian Marangi says:
====================
net: dsa: mt7530: modernize MIB handling + fix
This small series modernize MIB handling for MT7530 and also
implement .get_stats64.
It was reported that kernel and Switch MIB desync in scenario where
a packet is forwarded from a port to another. In such case, the
forwarding is offloaded and the kernel is not aware of the
transmitted packet. To handle this, read the counter directly
from Switch registers.
====================
Link: https://patch.msgid.link/20250410163022.3695-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It was reported that the internally calculated counter might differ from
the real one from the Switch MIB. This can happen if the switch directly
forward packets between the ports or offload small packets like ARP
request. In such case, the kernel counter will desync compared to the
real one transmitted and received by the Switch.
To correctly provide the real info to the kernel, implement .get_stats64
that will directly read the current MIB counter from the switch
register.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410163022.3695-7-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For consistency with the other MIB counter, move also the remaining MIB
counter to define and update the custom MIB table.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410163022.3695-6-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drop custom handling of TX/RX packet stats and error MIB counter and handle
them in the standard .get_eth_mac_stats API
The MIB entry are dropped from the custom MIB table and converted to
a define providing only the MIB offset.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410163022.3695-5-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drop custom handling of TX/RX pause frame MIB counter and handle
them in the standard .get_eth_ctrl_stats API
The MIB entry are dropped from the custom MIB table and converted to
a define providing only the MIB offset.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410163022.3695-4-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drop custom handling of packet size and RX error MIB counter and handle
them in the standard .get_rmon_stats API
The MIB entry are dropped from the custom MIB table and converted to
a define providing only the MIB offset.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410163022.3695-3-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In preparation for migration to use of standard MIB API, generalize the
read port stats logic to a dedicated function.
This will permit to manually provide the offset and size of the MIB
counter to directly access specific counter.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410163022.3695-2-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mohsin Bashir says:
====================
eth: fbnic: extend hardware stats coverage
This patch series extends the coverage for hardware stats reported via
`ethtool -S`, queue API, and rtnl link stats. The patchset is organized
as follow:
- The first patch adds locking support to protect hardware stats.
- The second patch provides coverage to the hardware queue stats.
- The third patch covers the RX buffer related stats.
- The fourth patch covers the TMI (TX MAC Interface) stats.
- The last patch cover the TTI (TX TEI Interface) stats.
====================
Link: https://patch.msgid.link/20250410070859.4160768-1-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add coverage for the TX Extension (TEI) Interface (TTI) stats. We are
tracking packets and control message drops because of credit exhaustion
on the TX interface.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-6-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch add coverage for TMI stats including PTP stats and drop
stats.
PTP stats include illegal requests, bad timestamp and good timestamps.
The bad timestamp and illegal request counters are reported under as
`error` via `ethtool -T` Both these counters are individually being
reported via `ethtool -S`
The good timestamp stats are being reported as `pkts` via `ethtool -T`
ethtool -S eth0 | grep "ptp"
ptp_illegal_req: 0
ptp_good_ts: 0
ptp_bad_ts: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-5-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch provides coverage to the RXB (RX Buffer) stats. RXB stats
are divided into 3 sections: RXB enqueue, RXB FIFO, and RXB dequeue
stats.
The RXB enqueue/dequeue stats are indexed from 0-3 and cater for the
input/output counters whereas, the RXB fifo stats are indexed from 0-7.
The RXB also supports pause frame stats counters which we are leaving
for a later patch.
ethtool -S eth0 | grep rxb
rxb_integrity_err0: 0
rxb_mac_err0: 0
rxb_parser_err0: 0
rxb_frm_err0: 0
rxb_drbo0_frames: 1433543
rxb_drbo0_bytes: 775949081
---
---
rxb_intf3_frames: 1195711
rxb_intf3_bytes: 739650210
rxb_pbuf3_frames: 1195711
rxb_pbuf3_bytes: 765948092
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-4-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch provides support for hardware queue stats and covers
packet errors for RX-DMA engine, RCQ drops and BDQ drops.
The packet errors are also aggregated with the `rx_errors` stats in the
`rtnl_link_stats` as well as with the `hw_drops` in the queue API.
The RCQ and BDQ drops are aggregated with `rx_over_errors` in the
`rtnl_link_stats` as well as with the `hw_drop_overruns` in the queue API.
ethtool -S eth0 | grep -E 'rde'
rde_0_pkt_err: 0
rde_0_pkt_cq_drop: 0
rde_0_pkt_bdq_drop: 0
---
---
rde_127_pkt_err: 0
rde_127_pkt_cq_drop: 0
rde_127_pkt_bdq_drop: 0
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-3-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds lock protection for the hardware statistics for fbnic.
The hardware statistics access via ndo_get_stats64 is not protected by
the rtnl_lock(). Since these stats can be accessed from different places
in the code such as service task, ethtool, Q-API, and net_device_ops, a
lock-less approach can lead to races.
Note that this patch is not a fix rather, just a prep for the subsequent
changes in this series.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410070859.4160768-2-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a driver for the MDIO controller on the RTL9300 family of Ethernet
switches with integrated SoC. There are 4 physical SMI interfaces on the
RTL9300 however access is done using the switch ports. The driver takes
the MDIO bus hierarchy from the DTS and uses this to configure the
switch ports so they are associated with the correct PHY. This mapping
is also used when dealing with software requests from phylib.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250409231554.3943115-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
net: stmmac: qcom-ethqos: simplifications
Remove unnecessary code from the qcom-ethqos glue driver.
Start by consistently using -> serdes_speed to set the speed of the
serdes PHY rather than sometimes using ->serdes_speed and sometimes
using ->speed.
This then allows the removal of ->speed in the second patch.
There is no need to set the maximum speed just because we're using
2500BASE-X - phylink already knows that 2500BASE-X can't support
faster speeds.
This then makes qcom_ethqos_speed_mode_2500() redundant as it's
setting the interface mode to the value that was determined in the
switch statement that already determined that the interface mode
had this value.
Not tested on hardware.
====================
Link: https://patch.msgid.link/Z_p0LzY2_HFupWK0@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qcom-ethqos doesn't need to implement the speed_mode_2500() method as
it is only setting priv->plat->phy_interface to 2500BASE-X, which is
already a pre-condition for assigning speed_mode_2500 in
qcom_ethqos_probe(). So, qcom_ethqos_speed_mode_2500() has no effect.
Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u3bYa-000EcW-H1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Phylink will already limit the MAC speed according to the interface,
so if 2500BASE-X is selected, the maximum speed will be 2.5G. It is,
therefore, not necessary to set a speed limit. Remove setting
plat_dat->max_speed from this glue driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u3bYV-000EcQ-Cv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than ethqos_fix_mac_speed() storing the speed in struct
qcom_ethqos and then functions that are only called from here reading
that speed, pass the speed to the called functions instead.
This removes all readers of this struct member, which then allows the
removal of the two places that set its value and the struct member.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u3bYQ-000EcK-9K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethqos->serdes_speed represents the current speed the serdes was
configured for, which should be the same as ethqos->speed. Since we
wish to remove ethqos->speed to simplify the code, switch to using the
serdes_speed instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u3bYL-000EcE-5c@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells says:
====================
rxrpc, afs: Add AFS GSSAPI security class to AF_RXRPC and kafs
Here's a set of patches to add basic support for the AFS GSSAPI security
class to AF_RXRPC and kafs. It provides transport security for keys that
match the security index 6 (YFS) for connections to the AFS fileserver and
VL server.
Note that security index 4 (OpenAFS) can also be supported using this, but
it needs more work as it's slightly different.
The patches also provide the ability to secure the callback channel -
connections from the fileserver back to the client that are used to pass
file change notifications, amongst other things. When challenged by the
fileserver, kafs will generate a token specific to that server and include
it in the RESPONSE packet as the appdata. The server then extracts this
and uses it to send callback RPC calls back to the client.
It can also be used to provide transport security on the callback channel,
but a further set of patches is required to provide the token and key to
set that up when the client responds to the fileserver's challenge.
This makes use of the previously added crypto-krb5 library that is now
upstream (last commit fc0cf10c04).
This series of patches consist of the following parts:
(0) Update kdoc comments to remove some kdoc builder warnings.
(1) Push reponding to CHALLENGE packets over to recvmsg() or the kernel
equivalent so that the application layer can include user-defined
information in the RESPONSE packet. In a follow-up patch set, this
will allow the callback channel to be secured by the AFS filesystem.
(2) Add the AF_RXRPC RxGK security class that uses a key obtained from the
AFS GSS security service to do Kerberos 5-based encryption instead of
pcbc(fcrypt) and pcbc(des).
(3) Add support for callback channel encryption in kafs.
(4) Provide the test rxperf server module with some fixed krb5 keys.
====================
Link: https://patch.msgid.link/20250411095303.2316168-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add RxGK server keys of bytes containing { 0, 1, 2, 3, 4, ... } to the
server keyring for the rxperf test server. This allows the rxperf test
client to connect to it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-15-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add more tracing for CHALLENGE and RESPONSE packets. Currently, rxrpc only
has client-relevant tracepoints (rx_challenge and tx_response), but add the
server-side ones too.
Further, record the service ID in the rx_challenge tracepoint as well.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-14-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement in kafs the hook for adding appdata into a RESPONSE packet
generated in response to an RxGK CHALLENGE packet, and include the key for
securing the callback channel so that notifications from the fileserver get
encrypted.
This will be necessary when more complex notifications are used that convey
changed data around.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-13-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a way for the application (e.g. the afs filesystem) to store
private data on the rxrpc_peer structs for later retrieval via the call
object.
This will allow afs to store a pointer to the afs_server object on the
rxrpc_peer struct, thereby obviating the need for afs to keep lookup tables
by which it can associate an incoming call with server that transmitted it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-11-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement rekeying of connections with the RxGK security class. This
involves regenerating the keys with a different key number as part of the
input data after a certain amount of time or a certain amount of bytes
encrypted. Rekeying may be triggered by either end.
The LSW of the key number is inserted into the security-specific field in
the RX header, and we try and expand it to 32-bits to make it last longer.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-10-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the basic parts of the yfs-rxgk security class (security index 6)
to support GSSAPI-negotiated security.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-9-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide some infrastructure for implementing the RxGK transport security
class:
(1) A definition of an encoding type, including:
- Relevant crypto-layer names
- Lengths of the crypto keys and checksums involved
- Crypto functions specific to the encoding type
- Crypto scheme used for that type
(2) A definition of a crypto scheme, including:
- Underlying crypto handlers
- The pseudo-random function, PRF, used in base key derivation
- Functions for deriving usage keys Kc, Ke and Ki
- Functions for en/decrypting parts of an sk_buff
(3) A key context, with the usage keys required for a derivative of a
transport key for a specific key number. This includes keys for
securing packets for transmission, extracting received packets and
dealing with response packets.
(3) A function to look up an encoding type by number.
(4) A function to set up a key context and derive the keys.
(5) A function to set up the keys required to extract the ticket obtained
from the GSS negotiation in the server.
(6) Miscellaneous functions for context handling.
The keys and key derivation functions are described in:
tools.ietf.org/html/draft-wilkinson-afs3-rxgk-11
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-8-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the YFS-variant RxGK security class to support
GSSAPI-derived authentication. This also allows the use of better crypto
over the rxkad security class.
The key payload is XDR encoded of the form:
typedef int64_t opr_time;
const AFSTOKEN_RK_TIX_MAX = 12000; /* Matches entry in rxkad.h */
struct token_rxkad {
afs_int32 viceid;
afs_int32 kvno;
afs_int64 key;
afs_int32 begintime;
afs_int32 endtime;
afs_int32 primary_flag;
opaque ticket<AFSTOKEN_RK_TIX_MAX>;
};
struct token_rxgk {
opr_time begintime;
opr_time endtime;
afs_int64 level;
afs_int64 lifetime;
afs_int64 bytelife;
afs_int64 enctype;
opaque key<>;
opaque ticket<>;
};
const AFSTOKEN_UNION_NOAUTH = 0;
const AFSTOKEN_UNION_KAD = 2;
const AFSTOKEN_UNION_YFSGK = 6;
union ktc_tokenUnion switch (afs_int32 type) {
case AFSTOKEN_UNION_KAD:
token_rxkad kad;
case AFSTOKEN_UNION_YFSGK:
token_rxgk gk;
};
const AFSTOKEN_LENGTH_MAX = 16384;
typedef opaque token_opaque<AFSTOKEN_LENGTH_MAX>;
const AFSTOKEN_MAX = 8;
const AFSTOKEN_CELL_MAX = 64;
struct ktc_setTokenData {
afs_int32 flags;
string cell<AFSTOKEN_CELL_MAX>;
token_opaque tokens<AFSTOKEN_MAX>;
};
The parser for the basic token struct is already present, as is the rxkad
token type. This adds a parser for the rxgk token type.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-7-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
