Bastien Curutchet says:
====================
net: dsa: microchip: Remove one indirection layer
This series follows the discussions we had on a previous series that
aimed to add PTP support for the KSZ8463 (cf [1]).
The KSZ driver got way too convoluted over time because it uses a common
framework to handle more than 20 switches split in 5 families (see below
table)
+----------+---------+---------+---------+---------+---------+
| Family | KSZ8463 | KSZ87xx | KSZ88xx | KSZ9477 | LAN937X |
+----------+---------+---------+---------+---------+---------+
| Switches | KSZ8463 | KSZ8795 | KSZ88X3 | KSZ8563 | LAN9370 |
| | | KSZ8794 | KSZ8864 | KSZ9477 | LAN9371 |
| | | KSZ8765 | KSZ8895 | KSZ9896 | LAN9372 |
| | | | | KSZ9897 | LAN9373 |
| | | | | KSZ9893 | LAN9374 |
| | | | | KSZ9563 | |
| | | | | KSZ8567 | |
| | | | | KSZ9567 | |
| | | | | LAN9646 | |
+----------+---------+---------+---------+---------+---------+
A unique struct dsa_switch_ops is used by all the switches. Next to it,
each switch family has its own struct ksz_dev_ops with family-specific
callbacks. So the dsa_switch_ops operations handle the specificities of
each family through these ksz_dev_ops callbacks and/or conditional
branches based on the chip ID.
Vladimir initiated a rework of the driver ([2]) which I carried on. On
top of the rework I added PTP and periodic output support for the
KSZ8463 (which was my first goal). There are more than 60 patches for
all this so this series will be followed by several others and if you
want to see the full picture we can check my github ([3]).
This first series aims to split the unique struct dsa_switch_ops into
5 so each switch family will be able to implement its own set of DSA
operations.
I haven't finished yet to group all the patches into meaningful series
but here is more or less what I plan to do next:
- A series will remove from the struct ksz_dev_ops the callbacks
that have an equivalent in dsa_switch_ops to remove one level of
indirection.
- A series will split again some operations to get rid of the
if (is_kszXYZ) branches.
- Maybe a fourth one will be needed to completely move out of
ksz_common.c everything that isn't truly common to all the switches
- A series will add PTP support for the KSZ8463
- A final series will add periodic output support for the KSZ8463
[1]: https://lore.kernel.org/r/20260304-ksz8463-ptp-v6-0-3f4c47954c71@bootlin.com)
[2]: https://github.com/vladimiroltean/linux/tree/ksz_separate_dsa_switch_ops
[3]: https://github.com/bastien-curutchet/linux/tree/ksz_rework
====================
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-0-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the KSZ switches use the same ksz_connect_tag_protocol while they
don't support all the KSZ tag protocols. So if, for some reason, a given
switch tries to connect another KSZ tag protocol, it won't fail.
Split the common ksz_connect_tag_protocol() into switch-specific
operations. This way, each switch will only accept to connect the tag
protocol it supports.
Remove the no longer used common operation.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-9-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the switch families use a common function to implement
.get_tag_protocol(). This function then returns the relevant protocol
depending on the chip ID.
Make the protocol to dsa_switch_ops association a little bit more
obvious by having separate implementations.
Change made by manually checking which chip id has which dsa_switch_ops
assigned to it, then filtering the common ksz_get_tag_protocol() for
just those chip IDs pertaining to it.
As an important benefit, we no longer have that weird-looking
DSA_TAG_PROTO_NONE fallback which was never actually returned.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-8-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that each switch driver has its own dsa_switch_ops (currently a copy
of ksz_switch_ops), we no longer need ksz_switch_ops and can remove it.
Get to the driver-specific dsa_switch_ops through the ksz_chip_data
structure.
Reorder the alloc()/get_match_data() calls such as to have that
pointer available.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-7-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we have a single dsa_switch_ops for 4 very distinct families
of switches, and many dsa_switch_ops methods are simply a dispatches
through ksz_dev_ops. That creates an avoidable level of indirection.
As a preparation for removing that indirection layer, create a separate
dsa_switch_ops structure wherever we have a ksz_dev_ops. These
structures are not yet used - ksz_switch_ops from ksz_common.c still is.
However, this reduces the noise from subsequent changes.
All new dsa_switch_ops are exact copies of ksz_switch_ops. But we need
to export function prototypes from ksz_common.c so that they are
callable from individual drivers.
Note that "individual drivers" are not actual separate kernel modules.
All of ksz8.c, ksz9477.c and lan937x_main.c are part of the same
ksz_switch.ko. Only the "register interface" drivers are different
modules (ksz9477_i2c.o for I2C, ksz_spi.o for SPI, ksz8863_smi.o for
MDIO). So we don't need to export any symbol.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-6-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to ksz_dev_ops, struct phylink_mac_ops shouldn't be part of
the common code. Instead, the common code should provide callable
functionality.
Invert the paradigm and export the common aspects from ksz_common.c, and
move the chip-specific stuff in individual drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-5-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ9477 and the LAN937 to
their individual drivers.
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-4-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ8xxx to ksz8.c
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-3-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5: ICM page management in VHCA_ID mode
This series adds driver support for the VHCA_ID page management mode.
When firmware and driver support this mode, ICM (Interconnect Context
Memory) page management uses the device vhca_id as the function
identifier in MANAGE_PAGES, QUERY_PAGES, and page request events instead
of the legacy function_id + ec_function pair.
Background
Firmware can operate page management in two modes:
FUNC_ID mode (current): Function identity is (function_id, ec_function).
This remains the default and is used for boot pages and when the new
mode capability is not set.
VHCA_ID mode (new): Function identity is vhca_id only; ec_function is
ignored. This aligns page management with the vhca_id-based model used
by other firmware commands and simplifies identification on SmartNIC and
multi-function setups.
====================
Link: https://patch.msgid.link/20260506133239.276237-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for VHCA_ID-based page management mode. When the device
firmware advertises the icm_mng_function_id_mode capability with
MLX5_ID_MODE_FUNCTION_VHCA_ID, page management operations between the
driver and firmware may use vhca_id instead of function_id as the
effective function identifier, and the ec_function field is ignored.
Update page management commands to conditionally set ec_function field
only in FUNC_ID mode. Boot page allocation always uses FUNC_ID mode
semantics for backward compatibility, as the capability bit is only
available after set_hca_cap(). If after set_hca_cap() VHCA_ID mode was
set, modify the tracking of the boot pages in page_root_xa to use
vhca_id too.
Add mlx5_esw_vhca_id_to_func_type() to resolve the function type in
VHCA_ID mode, enabling per-type debugfs counters. Use a dedicated
vhca_type_map xarray, to provide lockless lookup. Store the resolved
type on each fw_page at allocation time so reclaim and release paths
read it directly without any lookup.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the per function type debugfs page counters dynamically added after
mlx5_eswitch_init(). When page management operates in vhca_id mode, only
the function acting as either eSwitch or vport manager can initialize
the eSwitch structure and translate the vhca_id to function type for the
functions to which it supplies pages. The next patch will add support
for page management in vhca_id mode.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several eswitch functions that only query other functions' HCA
capabilities or read cached vport state are guarded by the
vhca_resource_manager capability. This capability is required for
set_hca_cap operations but query_hca_cap of other functions only
requires the vport_group_manager capability.
Relax the capability check from vhca_resource_manager to
vport_group_manager in the following query-only paths:
- mlx5_esw_vport_caps_get() - queries other function general caps
- esw_ipsec_vf_query_generic() - queries other function ipsec cap
- mlx5_devlink_port_fn_migratable_get() - reads cached vport state
- mlx5_devlink_port_fn_roce_get() - reads cached vport state
- mlx5_devlink_port_fn_max_io_eqs_get() - queries other function caps
- mlx5_esw_vport_enable/disable() - vhca_id map/unmap
Functions that perform also set_hca_cap (migratable_set, roce_set,
max_io_eqs_set, esw_ipsec_vf_set_generic, esw_ipsec_vf_set_bytype)
retain the vhca_resource_manager requirement.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260506133239.276237-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbe_get_eee_e610() fills kedata->lp_advertised from pcaps.eee_cap
returned by ixgbe_aci_get_phy_caps() with IXGBE_ACI_REPORT_ACTIVE_CFG.
That report mode (and the other IXGBE_ACI_REPORT_* modes) describe the
local PHY only, not the link partner. The X550 path uses a separate
FW_PHY_ACT_UD_2 activity for partner data; the E610 ACI has no
equivalent.
Leave lp_advertised zeroed via the existing linkmode_zero() and drop
the now-unused ixgbe_eee_cap_map[]. eee_active/eee_enabled are
unaffected (sourced from link.eee_status).
Fixes: b61dbdeff3 ("ixgbe: E610: add EEE support")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260507-jk-iwl-next-fix-eee-ixgbe-v1-1-62bc1d197d1d@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
net: Fix protodown with macvlan
When protodown is enabled on a macvlan, two bugs cause the macvlan to
incorrectly gain carrier:
1. Toggling the lower device's carrier while protodown is enabled on the
macvlan causes the macvlan to gain carrier, effectively bypassing the
protodown mechanism.
2. Toggling protodown on and then off on the macvlan while the lower
device has no carrier causes the macvlan to gain carrier, since
netif_change_proto_down() unconditionally turns the carrier on.
Patch #1 is a preparation.
Patch #2 solves the first problem by making netif_carrier_on() return
early when protodown is on.
Patch #3 solves the second problem by only calling netif_carrier_on()
when protodown is turned off if there is no linked net device or if the
linked net device has a carrier.
Patch #4 adds a selftest covering both bugs and the basic protodown
functionality.
Targeting at net-next since these are not regressions (i.e., never
worked).
Note that while these changes are in the core, they should only affect
macvlan as protodown is only supported by macvlan and vxlan and only
the former has a linked net device.
====================
Link: https://patch.msgid.link/20260507105906.891817-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for the protodown mechanism.
Five test cases are included:
1. Basic protodown toggling: Verify that setting protodown on macvlan
results in DOWN operational state and clearing it restores UP.
2. Same as the previous test case, but with vxlan.
3. Protodown reasons: Verify that protodown cannot be cleared while
there are active protodown reasons, but can be cleared once all
reasons are removed.
4. Protodown with lower device being toggled: Verify that toggling the
lower device's carrier while protodown is on does not cause the
macvlan to gain carrier.
5. Protodown with lower device down: Verify that toggling protodown
while the lower device has no carrier does not cause the macvlan to
gain carrier.
Note that the last two test cases fail without "net: Do not turn on
carrier when protodown is on" and "net: Do not unconditionally turn on
carrier when turning off protodown":
# ./protodown.sh
TEST: Basic protodown on/off with macvlan [ OK ]
TEST: Basic protodown on/off with vxlan [ OK ]
TEST: Protodown reasons [ OK ]
TEST: Protodown with lower device toggled [FAIL]
Macvlan operational state is not DOWN despite protodown
TEST: Protodown with lower device down [FAIL]
Macvlan is not LOWERLAYERDOWN after clearing protodown
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260507105906.891817-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The protodown functionality allows user space to turn off the carrier of
a net device:
# ip link add name dummy1 up type dummy
# ip link add name macvlan1 up link dummy1 type macvlan mode bridge
# ip link set dev macvlan1 protodown on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
When protodown is turned off, the core unconditionally turns on the
carrier of the net device:
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
This is wrong as it means that a macvlan can end up with a carrier when
its lower device does not have a carrier:
# ip link set dev dummy1 carrier off
$ ip -br link show dev macvlan1
macvlan1@dummy1 LOWERLAYERDOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev macvlan1 protodown on
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Solve this by resolving the linked net device and if one exists, inherit
its carrier state when protodown is turned off. Otherwise, if no linked
net device exists, as before, simply turn on the carrier.
Resolve the linked net device using a new helper and have it return the
device itself (in a similar fashion to dev_get_iflink()) if the device
does not implement both ndo_get_iflink() and get_link_net(). If the
latter is not implemented, it is unclear in which network namespace we
should look up the linked net device. Currently, this helper is only
used for net devices that support protodown (macvlan and vxlan) and for
both it returns the correct result.
Output with the patch:
# ip link add name dummy1 up type dummy
# ip link add name macvlan1 up link dummy1 type macvlan mode bridge
# ip link set dev dummy1 carrier off
$ ip -br link show dev macvlan1
macvlan1@dummy1 LOWERLAYERDOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev macvlan1 protodown on
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 LOWERLAYERDOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev dummy1 carrier on
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
# ip link set dev macvlan1 protodown on
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260507105906.891817-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The protodown functionality allows user space to turn off the carrier of
a net device:
# ip link add name dummy1 up type dummy
# ip link add name macvlan1 up link dummy1 type macvlan mode bridge
# ip link set dev macvlan1 protodown on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
Different applications can set different protodown reasons, which
prevents an application from turning on the carrier of a net device as
long as others want it down:
# ip link set dev macvlan1 protodown_reason 1 on
# ip link set dev macvlan1 protodown_reason 2 on
# ip link set dev macvlan1 protodown off
Error: Cannot clear protodown, active reasons.
# ip link set dev macvlan1 protodown_reason 2 off
# ip link set dev macvlan1 protodown off
Error: Cannot clear protodown, active reasons.
# ip link set dev macvlan1 protodown_reason 1 off
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Unfortunately, this mechanism is not very useful when the carrier of a
net device can be toggled by toggling the carrier of its lower device:
# ip link set dev macvlan1 protodown on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev dummy1 carrier off
# ip link set dev dummy1 carrier on
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Obviously, this is not the intended behavior and it is unlikely to be
relied on by anyone. In fact, it is a problem for applications like FRR
that use protodown with macvlan on top of a bridge as part of Virtual
Router Redundancy Protocol (VRRP).
Solve this by preventing a net device configured with protodown on from
gaining carrier by making netif_carrier_on() a NOP when protodown is
turned on.
Output with the patch:
# ip link add name dummy1 up type dummy
# ip link add name macvlan1 up link dummy1 type macvlan mode bridge
# ip link set dev macvlan1 protodown on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev dummy1 carrier off
# ip link set dev dummy1 carrier on
$ ip -br link show dev macvlan1
macvlan1@dummy1 DOWN 0a:5c:a3:05:c7:86 <NO-CARRIER,BROADCAST,MULTICAST,UP>
# ip link set dev macvlan1 protodown off
$ ip -br link show dev macvlan1
macvlan1@dummy1 UP 0a:5c:a3:05:c7:86 <BROADCAST,MULTICAST,UP,LOWER_UP>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260507105906.891817-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A subsequent patch will make netif_carrier_on() a NOP for net devices
that have protodown turned on so that they will not accidentally gain
carrier. As a preparation, set dev->proto_down before calling
netif_carrier_{off,on}().
Note that the only driver that supports protodown and has a notion of a
carrier is macvlan and it is calling netif_carrier_{off,on}() with RTNL
held.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260507105906.891817-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Chen says:
====================
Keep PHY link during WoL sleep cycle
First we divide the init/deinit path to allow for a partial init/deinit
during a sleep cycle. We also remove some unnecessary small functions at
the same time.
Then we modify the suspend and resume path to allow for a partial bring
down and bring up. This allow us to keep the PHY link up and to resume
network traffic much quicker. Note we only do this when WoL is enabled
since the PHY is already powered. In the non-WoL case we want to follow
the same flow.
====================
Link: https://patch.msgid.link/20260506213114.2002886-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We currently more or less restart all the HW on resume. Since we also
stop the PHY, it takes a while for the PHY link to be re-negotiated on
resume. Instead of doing a full restart, we keep the HW state and the
PHY link, that way we can resume network traffic with a much smaller
delay.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260506213114.2002886-3-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To prepare for a partial bring up of the interface during resume,
we break apart the bcmasp_netif_init() function into smaller chunks
that can be called as necessary. Also consolidate some functions that
do not need to be standalone.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260506213114.2002886-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add bindings for LAN7500 and LAN7505 USB Ethernet Devices which are similar
to LAN9500.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-b4-var-som-om44-lan7500-v2-1-b8af59ab877c@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool on this phy device always reports "MDI-X: Unknown" and doesn't
support forcing it to on or off.
This patch adds support for reading/forcing MDI-X mode from ethtool
properly.
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260506141918.13136-1-l.ellero@asem.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to the generic power management and remove the usage of legacy
(pci_driver) hooks.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260506165015.641738-1-vaibhavgupta40@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 383d89699c ("treewide: Drop pci_save_state() after
pci_restore_state()") sought to purge all superfluous invocations of
pci_save_state() from the tree.
Unfortunately the commit missed one invocation in the Broadcom
NetXtreme-C/E driver. Drop it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/39de1b025928d9a457976010b2324e7e99baa92a.1778158755.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dsa.yaml and ethernet-switch.yaml bindings recommend
prefixing ethernet switches and ports with "ethernet-" so
make the LAN966x do the same.
Reported-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260507-lan966-binding-v1-1-e99293d2a4ec@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The atl2 driver contains code for compatibility with old kernels that
do not support module_param_array. Backward compatibility is
irrelevant because this driver is in-tree. Remove this unreachable
code to simplify the driver's handling of module parameters.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260506054035.23710-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NIPA tries to make sure that HW tests don't modify system state.
It saves the state of page pools, too. Now that I write this commit
message I realize that this is impractical since page pool IDs and
state will get legitimately changed by the tests. But I already
spent a couple of hours implementing the filtering, so..
Link: https://patch.msgid.link/20260506034821.1710113-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that
IPv6 itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi: cw1200: revert "Fix locking in error paths"
- wifi: ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix: fix an issue between garbage collection and PEEK
- af_unix: fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmn8whsACgkQMUZtbf5S
IrtH+w//SEA3x/LuhHYW7dAr6j+yF5YXnGQ5+DlvUI2N5MzzLRKZqPQB9XSNzQEv
Ptq8XAoNY+ItZft8GjTGOQddMDPYi+sS43Lt5t2W1Fq74tUkI+9YEPin0WH9WapQ
uy7e9/15/gJW+3jQeCg4KYMwf65THCUhoSNZO5ORIeVuT/m0OdsoVLNwuM6zjzNZ
hwOGWZDFn06M0tm8oL2LnE9D/iXqztgnHhcSVMe5X3uCgK7EHMySjmj4JsjdEV6R
9U83zG+5/VKjVc7fGiozCiYk5ctiGYFMhvLUDZtdxNpf95rVRpCWu2TNx4gsCh9E
QaOarvqHXTrrG4bz57vN7Bcegcjk+5GvREIPNznEWfMN+k3Tft9x+wEHP5MGBbn3
K+2JGoNF7aTQGlBuH/szPdHh3m0V3oTRu1azisY0NiAGUKHageQAch6uHTm/7ixj
iNmOQ/aY10ITlhUqmTN2jHdl+8bgtMOmaV9zyn5588UWakVu+5zUGTtxjefrxMiQ
bYTs9Ya54BM5dKVT1tbgKs6ZY+shb8Erncd8vr0ltUmp8UW4Ovz6FxQ9tRP7tAaV
vRAQYWE50751YUjqwJJShWpKAlWJlJ0jELEsYYXNeeBbmpMYLm9vgGf7+2TNXToE
0dth3eJTGhzYYDqqgC9Q2ZlkbhdCMWotde9vMUGdhiErgorKsqs=
=ogzY
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, IPsec, Bluetooth and WiFi.
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that IPv6
itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi:
- cw1200: revert "Fix locking in error paths"
- ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix:
- fix an issue between garbage collection and PEEK
- fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)"
* tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (190 commits)
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
net: sparx5: fix wrong chip ids for TSN SKUs
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
tcp: Fix dst leak in tcp_v6_connect().
ipmr: Call ipmr_fib_lookup() under RCU.
net: phy: broadcom: Save PHY counters during suspend
net/smc: fix missing sk_err when TCP handshake fails
af_unix: Reject SIOCATMARK on non-stream sockets
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
eth: fbnic: fix double-free of PCS on phylink creation failure
net: ethernet: cortina: Drop half-assembled SKB
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
selftests: mptcp: check output: catch cmd errors
mptcp: pm: prio: skip closed subflows
mptcp: pm: ADD_ADDR rtx: return early if no retrans
mptcp: pm: ADD_ADDR rtx: skip inactive subflows
mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker
mptcp: pm: ADD_ADDR rtx: free sk if last
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
mptcp: pm: ADD_ADDR rtx: fix potential data-race
...
sparx5_port_init() only invokes sparx5_serdes_set() and the associated
shadow-device enable and low-speed device switch for SGMII and QSGMII.
On any port with a high-speed primary device (DEV5G/DEV10G/DEV25G)
configured for 1000BASE-X the serdes is therefore left uninitialized,
the DEV2G5 shadow is never enabled, and the port stays pointed at its
high-speed device rather than the DEV2G5. The PCS1G block looks
healthy in isolation, but no frames reach the link partner.
Add 1000BASE-X to the check so the same three steps run.
Note: the same issue might apply to 2500BASE-X, but that will,
eventually, be addressed in a separate commit.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 946e7fd505 ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-4-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TSN SKUs in enum spx5_target_chiptype have incorrect IDs:
SPX5_TARGET_CT_7546TSN = 0x47546,
SPX5_TARGET_CT_7549TSN = 0x47549,
SPX5_TARGET_CT_7552TSN = 0x47552,
SPX5_TARGET_CT_7556TSN = 0x47556,
SPX5_TARGET_CT_7558TSN = 0x47558,
The value read back from the chip is GCB_CHIP_ID_PART_ID, which is a
GENMASK(27, 12) field, i.e. at most 16 bits wide. It can never match
these IDs, so probing a TSN part fails with a "Target not supported"
error.
Fix the enum to use the actual 16-bit part IDs returned by the
hardware: 0x0546, 0x0549, 0x0552, 0x0556 and 0x0558.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 3cfa11bac9 ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-3-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
* Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
* ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
* HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
* USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
* Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest
-----BEGIN PGP SIGNATURE-----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=prTy
-----END PGP SIGNATURE-----
Merge tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest"
* tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: cs35l56: Destroy workqueue in probe error path
ASoC: cs35l56: Don't use devres to unregister component
ALSA: sparc/dbri: add missing fallthrough
ALSA: core: Serialize deferred fasync state checks
ALSA: hda/realtek: Add mute LED fixup for HP Pavilion 15-cs1xxx
ALSA: seq: Fix UMP group 16 filtering
ASoC: wm_adsp_fw_find_test: Clear searched_fw_files in find-by-index test
ASoC: wm_adsp_fw_find_test: Redirect wm_adsp_release_firmware_files()
ASoC: tas2770: Deal with bogus initial temperature value
ASoC: tas2764: Deal with bogus initial temperature register value
ALSA: usb-audio: add clock quirk for Motu 1248
ALSA: usb-audio: midi2: Restart output URBs on resume
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 15-fh0xxx
ALSA: usb-audio: Add quirk flags for JBL Pebbles
ALSA: firewire-tascam: Do not drop unread control events
ALSA: usb-audio: Add quirk flags for AlphaTheta EUPHONIA
ASoC: fsl_xcvr: Fix event generation for cached controls
ASoC: sdw_utils: avoid the SDCA companion function not supported failure
ASoC: amd: yc: Add HP OMEN Gaming Laptop 16-ap0xxx product line in quirk table
ASoC: cs35l56: Fix out-of-bounds in dev_err() in cs35l56_read_onchip_spkid()
...
Fixes
- hp-wmi: silence unknown board warning for 8D41
- lenovo/wmi-other: Fix uninitialized variable in fan RPM handling
- wmi: Check min_size also when ACPI does not return an out object
The following is an automated shortlog grouped by driver:
hp-wmi:
- silence unknown board warning for 8D41
lenovo: wmi-other:
- Fix uninitialized variable in lwmi_om_hwmon_write()
wmi:
- Fix unchecked min_size in wmidev_invoke_method()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCafx4pgAKCRBZrE9hU+XO
MerAAP9ALfDumabgsXGDibvB5700w4oXxKpf+NS/O0RGlKSpigD/bvo4xIut5Qow
xYZfEhYkRUyd0bSQwYh5i7fS8am7Nw8=
=Lais
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Silence unknown board warning for 8D41 (hp-wmi)
- Fix uninitialized variable in fan RPM handling (lenovo/wmi-other)
- Check min_size also when ACPI does not return an out object (wmi)
* tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo: wmi-other: Fix uninitialized variable in lwmi_om_hwmon_write()
platform/x86: hp-wmi: silence unknown board warning for 8D41
platform/wmi: Fix unchecked min_size in wmidev_invoke_method()
priv->dev was never initialized after devm_kzalloc() allocates the
private data structure. When nvt_set_phy_intf_sel() is later invoked
via the phylink interface_select callback, it calls
nvt_gmac_get_delay(priv->dev, ...) which dereferences the NULL pointer.
Fix this by assigning priv->dev = dev immediately after allocation.
Fixes: 4d7c557f58 ("net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family")
Signed-off-by: Joey Lu <a0987203069@gmail.com>
Link: https://patch.msgid.link/20260506084614.192894-2-a0987203069@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a socket is bound to a wildcard address, tcp_v[46]_connect()
updates it with a non-wildcard address based on the route lookup.
After bhash2 was introduced in the cited commit, we must call
inet_bhash2_update_saddr() to update the bhash2 entry as well.
If inet_bhash2_update_saddr() fails, we must release the refcount
for dst by ip_route_connect() or ip6_dst_lookup_flow().
While tcp_v4_connect() calls ip_rt_put() in the error path,
tcp_v6_connect() does not call dst_release().
Let's call dst_release() when inet_bhash2_update_saddr() fails
in tcp_v6_connect().
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260506070443.1699879-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PHY counters can be lost if the PHY is reset during suspend. We
need to save the values into the shadow counters or the accounting
will be incorrect over multiple suspend and resume cycles.
Fixes: 820ee17b8d ("net: phy: broadcom: Add support code for reading PHY counters")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260505173926.2870069-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In smc_connect_work(), when the underlying TCP handshake fails, the error
code (rc) must be propagated to sk_err to ensure userspace can correctly
retrieve the error status via SO_ERROR. Currently, the code only handles
a restricted set of error codes (e.g., EPIPE, ECONNREFUSED). If other
errors occurs, such as EHOSTUNREACH, sk_err remains unset (zero).
This affects applications that rely on SO_ERROR to determine connect
outcome. For example, higher versions of Go's netpoller treats
SO_ERROR == 0 combined with a failed getpeername() as a spurious wakeup
and re-enters epoll_wait(). Under ET mode, no further edge will be
generated since the socket is already in a terminal state, causing the
connect to hang indefinitely or until a user-specified timeout, if one
is set.
Fixes: 50717a37db ("net/smc: nonblocking connect rework")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260506014105.27093-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue.
Fixes: 314001f0bf ("af_unix: Add OOB support")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506140825.2987635-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP redirect into a veth device (via bpf_redirect()) calls
veth_xdp_xmit(), which enqueues frames into the peer's ptr_ring using
smp_processor_id() % peer->real_num_rx_queues
as the ring index. With an asymmetric veth pair where the peer has
fewer TX queues than RX queues, that index can exceed
peer->real_num_tx_queues.
veth_poll() then resolves peer_txq for the ring via:
peer_txq = peer_dev ? netdev_get_tx_queue(peer_dev, queue_idx) : NULL;
where queue_idx = rq->xdp_rxq.queue_index. When queue_idx exceeds
peer_dev->real_num_tx_queues this is an out-of-bounds (OOB) access
into the peer's netdev_queue array, triggering DEBUG_NET_WARN_ON_ONCE
in netdev_get_tx_queue().
The normal ndo_start_xmit path is not affected: the stack clamps
skb->queue_mapping via netdev_cap_txqueue() before invoking
ndo_start_xmit, so rxq in veth_xmit() never exceeds real_num_tx_queues.
Fix veth_poll() by clamping: only dereference peer_txq when queue_idx is
within bounds, otherwise set it to NULL. The out-of-range rings are fed
exclusively via XDP redirect (veth_xdp_xmit), never via ndo_start_xmit
(veth_xmit), so the peer txq was never stopped and there is nothing to
wake; NULL is the correct fallback.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260502071828.616C3C19425@smtp.kernel.org/
Fixes: dc82a33297 ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260505132159.241305-2-hawk@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* Fixes
- Fix a NULL dereference in cros_ec_typec.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCafql3BMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0WUYBANT74RbimiLqthwB3eAKwDI/NoY1n4L1
DFLw9p9aAZ44AQDobVTg3UirNAo7tzcXDXaAhNSMn02A8cOQfrSShLadAQ==
=WDBR
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform fix from Tzung-Bi Shih:
- Fix a NULL dereference in cros_ec_typec
* tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
Since the platform_device support is now gone, nothing ever passes a
valid gpio number, and all the link state handling can go away.
An earlier version of my patch changed this to look up the GPIO descriptor
from devicetree and convert it all to the modern interface, but there
are no users of that binding at the moment.
Remove the gpio handling, which is now one of the last users of the
legacy gpio interface in platform-independent code.
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20230127095839.3266452-1-arnd@kernel.org/
Link: https://patch.msgid.link/20260505180459.1247690-3-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
