The affected pinctrl drivers either check for the presence of a standard
property or read a property documented with an 8-bit cell encoding.
Using boolean or u32 helpers for those cases disagrees with the binding.
Use a presence helper for "gpio-ranges" and read
"microchip,spi-present-mask" with the u8 helper documented by the
binding.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
pinctrl consumers can request states while the pinctrl core enables the
controller. On Qualcomm pinctrl drivers this can happen before the SoC
function list has been registered, which leaves the function table
incomplete during state lookup.
On APQ8064 this can fail while claiming pinctrl hogs:
apq8064-pinctrl 800000.pinctrl: invalid function ps_hold in map table
apq8064-pinctrl 800000.pinctrl: error claiming hogs: -22
apq8064-pinctrl 800000.pinctrl: could not claim hogs: -22
Register Qualcomm pinctrl with devm_pinctrl_register_and_init(), add the
SoC pin functions, and only then enable the pinctrl device.
Signed-off-by: Alexandre MINETTE <contact@alex-min.fr>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use pinctrl_find_gpio_range_from_pin_nolock() instead of
pinctrl_find_gpio_range_from_pin() when configuring a pin or
setting a GPIO value.
This avoids taking the lock and allows the code to be safely
called from interrupt context.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add support for the pin controller on the UltraRISC DP1000 SoC.
The controller provides mux selection for pins in ports A, B, C, D, and
LPC. Ports A-D default to GPIO and support peripheral muxing. LPC pins
can be switched to eSPI, but are not available as GPIOs. Basic pin
configuration controls such as drive strength, pull-up, and pull-down
are also supported.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add doc for the pinctrl controllers on the UltraRISC DP1000 RISC-V SoC.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The macros QUP_I3C and UFS_RESET are defined in some platforms
and yet not used. Remove these macros as they are unnecessary.
Signed-off-by: Navya Malempati <navya.malempati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The NVIDIA Tegra264 MAIN, AON, and UPHY pin controllers are only present
on NVIDIA Tegra264 SoCs. Hence add a dependency on ARCH_TEGRA, to
prevent asking the user about this driver when configuring a kernel
without NVIDIA Tegra SoC support.
Fixes: c985062069 ("pinctrl: tegra: Add Tegra264 pinmux driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The NVIDIA Tegra238 MAIN and AON pin controllers are only present on
NVIDIA Tegra238 SoCs. Hence add a dependency on ARCH_TEGRA, to prevent
asking the user about this driver when configuring a kernel without
NVIDIA Tegra SoC support.
Fixes: 25cac7292d ("pinctrl: tegra: Add Tegra238 pinmux driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add 24 pin groups on ports EE, FF, GG and HH to the AON pin controller
group table (tegra238_aon_groups[]). Their pin arrays, drive-group
macros and pin descriptors were already defined, but the matching
PINGROUP() entries were not present, so these pins could not be muxed
or configured through the AON pin controller.
The pin arrays were not referenced, so the build emitted
-Wunused-const-variable warnings, and commit 119de2c33d ("pinctrl:
tegra238: remove unused entries") removed three of them. Restore those
arrays and add the full set of PINGROUP() entries to make the pins
usable.
Fixes: 25cac7292d ("pinctrl: tegra: Add Tegra238 pinmux driver")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add 24 pin groups, and their matching drive groups, on ports EE, FF,
GG and HH to the Tegra238 AON pinmux binding. These groups are present
on the AON pin controller, so device trees that mux these pins through
it validate against the schema.
Fixes: 9323f8a0e1 ("dt-bindings: pinctrl: Document Tegra238 pin controllers")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
pcm_spi_int, pcm_spi_cs2, pcm_spi_cs3, pcm_spi_cs4 pin groups are not
defined, so pcm_spi function can't be applied to these groups.
Fixes: 3ffeb17a9a ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
phy1_led1 pin function wrongly refers to gpio1 instead of gpio11.
Fix it.
Fixes: 3ffeb17a9a ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
gpio22 pin group is missed, fix it.
Fixes: 3ffeb17a9a ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
gpio21 pin group refers to gpio22 pin, this is wrong.
Fixes: 3ffeb17a9a ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
AN7581 have 47 valid GPIOs only (gpio0-gpio46), so gpio47 is a fiction.
AN7583 have 49 valid GPIOs (gpio0-gpio48), so gpio48 is missed
To fix an issue
* create AN7583 specific pwm pin function,
* remove gpio47 from AN7581 pwm pin function.
Fixes: 3ffeb17a9a ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Linus Walleij <linusw@kernel.org>
phy4_led1 pin function maps led incorrectly. It uses the same map as
phy3_led1. PHY{X} should map to LAN{N}_PHY_LED_MAP(X-1).
Fixes: 3ffeb17a9a ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
phy4_led1 pin function maps led incorrectly. It uses the same map as
phy3_led1. PHY{X} should map to LAN{N}_PHY_LED_MAP(X-1).
Fixes: 579839c954 ("pinctrl: airoha: convert PHY LED GPIO to macro")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Pin 21 (gpio19) duplicate pinconf settings of pin 20. Fix it using
a proper bit number in the configuration register.
Fixes: 3ffeb17a9a ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Pin 32 (gpio19) duplicate pinconf settings of pin 31. Fix it using
a proper bit number in the configuration register.
Fixes: 1c8ace2d07 ("pinctrl: airoha: Add support for EN7581 SoC")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
gpio32 pin group is missed for an7583 SoC. This patch add it.
Fixes: 3ffeb17a9a ("pinctrl: airoha: add support for Airoha AN7583 PINs")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
gpio32 pin group is missed for an7581 SoC. This patch add it.
Fixes: 1c8ace2d07 ("pinctrl: airoha: Add support for EN7581 SoC")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The Allwinner A523 SoC implements 10 GPIO banks in the first pinctrl
instance, but it skips the first bank (PortA), so their index goes from
1 to 10. The same is actually true for the IRQ banks: there are registers
for 11 banks, though the first bank is not implemented (RAZ/WI).
In contrast to previous SoCs, the count of the IRQ banks starts with this
first unimplemented bank, so we need to provide an interrupt for it.
And indeed the A523 user manual lists an interrupt number for PortA, so we
need to increase the maximum number of interrupts per pin controller to 11,
to be able to assign the correct interrupt number for each bank.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The Allwinner A10 and H3 SoCs cannot read the state of a GPIO line when
that line is muxed for IRQ triggering (muxval 6), but only if it's
explicitly muxed for GPIO input (muxval 0). Other SoCs do not show this
behaviour, so we added a optional workaround, triggered by a quirk bit,
which triggers remuxing the pin when it's configured for IRQ, while we
need to read its value.
For some reasons this quirk flag was copied over to newer SoCs, even
though they don't show this behaviour, and the GPIO data register
reflects the true GPIO state even with a pin muxed to IRQ trigger.
Remove the unneeded quirk from the A523 family, where it's definitely
not needed (confirmed by experiments), and where it actually breaks,
because the workaround is not compatible with the newer generation
pinctrl IP used in that chip.
Together with a DT change this fixes GPIO IRQ operation on the A523
family of SoCs, as for instance used for the SD card detection.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: b8a51e95b3 ("pinctrl: sunxi: Add support for the secondary A523 GPIO ports")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
GPIOs 38, 39, 48 and 49 support the SDC2 DATA function, while
GPIO 51 supports SDC2 CMD and GPIO 62 supports SDC2 CLK.
However, the sdc2 pin function is not listed in the corresponding
pingroup definitions, preventing these pins from being muxed for
SDC2 operation.
Add the missing sdc2 function mappings.
Fixes: 6f26989e15 ("pinctrl: qcom: Add Eliza pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
lpi_gpio_write() became unused after the PM clock runtime conversion
switched write paths to register helper calls inside callers that already
hold an active runtime-PM reference.
With -Werror this triggers:
error: 'lpi_gpio_write' defined but not used [-Wunused-function]
Drop the dead wrapper and rename the low-level MMIO helpers from
__lpi_gpio_* to lpi_gpio_*_reg for neutral register-accessor naming.
Fixes: b719ede389 ("pinctrl: qcom: lpass-lpi: Switch to PM clock framework for runtime PM")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/f03850f6-186d-4988-a450-e6e95f24a551@kernel.org/
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
- Fix locking on RZ/G3L.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaiaEHgAKCRCKwlD9ZEnx
cAcGAQDyFA1YJqpoXSgzjv0Kp0hG2MvaDXdx4rhCC5yjYesIdAEAvgcBMqbQqKct
ZAM2E2gd+GmdsdReRpmMWqnzp3LnDAk=
=sLxt
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v7.2-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v7.2 (take three)
- Fix locking on RZ/G3L.
* tag 'renesas-pinctrl-for-v7.2-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
pinctrl: renesas: rzg2l: Use raw_spinlock_irqsave() on power source update
Signed-off-by: Linus Walleij <linusw@kernel.org>
Commit e785c990ad ("pinctrl: Kconfig: drop unneeded dependencies
on OF_GPIO") removed a redundant dependecy on CONFIG_OF_GPIO for
several pinctrl drivers, but this change also removed a dependency
on CONFIG_OF for some of those drivers.
Normally, this wouldn't be a problem, but PINCTRL_STMFX also selected
MFD_STMFX, which does depend on CONFIG_OF. This conflict allows
MFD_STMFX to be enabled even if CONFIG_OF is disabled.
Fix this by also having PINCTRL_STMFX depend on CONFIG_OF. This is
okay because the pinctrl-stmfx driver actually does depend on CONFIG_OF
functions.
Fixes: e785c990ad ("pinctrl: Kconfig: drop unneeded dependencies on OF_GPIO")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The property 'input-voltage-microvolt' is a typo. Rename it to
'input-threshold-voltage-microvolt' to align with the standard pin
configuration defined in pincfg-node.yaml and parsed by pinconf-generic.c.
Fixes: f6ea7004e9 ("dt-bindings: pinctrl: realtek: Add RTD1625 pinctrl binding")
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The driver for MT6795 pinctrl already supports the slew-rate property.
Add its description to the documentation.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The correct Schmitt trigger register offset for pins 34-39 is 0xA00. Value
was verified with SoC data sheet.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Fixes: 82d70627e9 ("pinctrl: mediatek: Add MT8167 Pinctrl driver")
Signed-off-by: Linus Walleij <linusw@kernel.org>
Commit 56ffb63749 ("pinctrl: qcom: add multi TLMM region option parameter")
added reg-names property based register reading. However multiple platforms
are not using the reg-names as they have only single TLMM register region.
Commit tried to handle this using the default_region module parameter,
however this condition is unreachable as the error return precedes it by
just checking if reg-names property exists or not, making it impossible
to use tlmm-test for the SoCs (x1e80100) which don't have reg-names
property in TLMM device.
Fix this by moving the default_region check at the start of the
tlmm_reg_base().
Fixes: 56ffb63749 ("pinctrl: qcom: add multi TLMM region option parameter")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
MSM_PULL_MASK currently spans bits [2:0], but the GPIO_PULL field in the
GPIO_CFG register only occupies bits [1:0]. Bit 2 belongs to
FUNC_SEL.
MSM_PULL_MASK is used to isolate the GPIO_PULL bits before writing the
pull configuration (PULL_DOWN: 0x1, PULL_UP: 0x3) to the GPIO_CFG
register. Narrow it to bits [1:0] to prevent unintended modification of
the FUNC_SEL field.
This causes no functional change since the driver currently does not
modify the FUNC_SEL bit, but align the mask with hardware configuration
nonetheless.
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Convert the LPASS LPI pinctrl driver to use the PM clock framework for
runtime power management.
This allows the LPASS LPI pinctrl driver to drop clock votes when idle,
improves power efficiency on platforms using LPASS LPI island mode, and
aligns the driver with common runtime PM patterns used across Qualcomm
LPASS subsystems.
Guard GPIO register read/write helpers and slew-rate register programming
with synchronous runtime PM calls so the device is active during MMIO
operations whenever autosuspend is enabled.
Make PINCTRL_LPASS_LPI depend on PM_CLK, since this patch introduces
direct PM clock API use in the shared core.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The LPASS LPI core conversion to PM clock framework relies on variant
drivers wiring runtime PM callbacks.
Hook up runtime PM callbacks for the LPASS LPI variant drivers touched
in this patch so they are prepared for the shared core conversion.
This commit is a preparatory NOP on its own, as runtime PM is still
disabled on these devices until the following core conversion patch.
This is a mechanical per-variant driver update that relies on the
same generic PM clock flow (of_pm_clk_add_clks() + pm_clk_suspend/
pm_clk_resume()) and DT-provided clocks.
Runtime behavior was validated on Kodiak (sc7280).
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
aspeed_g7_soc1_gpio_request_enable() unconditionally writes mux
function 0 to route the requested pin to GPIO. This is wrong for the
ADC-capable balls W17 through AB19 (ADC0-ADC15), where function 0
selects the ADC input and function 1 selects GPIO. Requesting one of
those GPIOs therefore muxed the ball to ADC instead.
Write mux value 1 for balls W17 through AB19 so the GPIO function is
actually selected.
Fixes: 4af4eb66aa ("pinctrl: aspeed: Add AST2700 SoC1 support")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
In preparation for additional SoC support, move the Airoha pinctrl driver
for AN7581 SoC to a dedicated directory.
This is to tidy things up and keep code organized without polluting the
Mediatek driver directory.
The driver doesn't depend on any generic or common code from the Mediatek
codebase so it can be safely moved without any modification.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The rest of the driver uses raw_spin_lock_irqsave() and
raw_spin_unlock_irqrestore() for locking. To avoid concurrency issues
or deadlocks, use raw_spinlock_irqsave() via the scoped_guard() helper
for power source updates as well.
Fixes: bbe2277ded ("pinctrl: renesas: rzg2l: Add support for selecting power source for {WDT,AWO,ISO}")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260603151642.4075678-2-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
* Tidy up the PWM base computation to avoid false positive *SAN warnings
-----BEGIN PGP SIGNATURE-----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=BE49
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v7.2-1
* Tidy up the PWM base computation to avoid false positive *SAN warnings
Signed-off-by: Linus Walleij <linusw@kernel.org>
The most accepted style for the array terminator is to use a single
space between the curly braces and no trailing comma. Also don't use a comma
directly before a closing brace in the other entries.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous unit.
While touching these arrays unify spacing and usage of commas.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Linus Walleij <linusw@kernel.org>
Before commit 14dbe186b9 ("pinctrl: msmgpio: Make the irqchip immutable")
msm gpio irqchip conditionally initialized pctrl->irq_chip.irq_eoi to
irq_chip_eoi_parent() only for the GPIO irqs having a wakeup capable irq.
In order to make gpio irqchip immutable pctrl->irq_chip.irq_eoi is
initialized to msm_gpio_irq_eoi() which now gets invoked for both wake up
and non-wakeup capable GPIO IRQs.
Replace open coded eoi call to parent irqchip with irq_chip_eoi_parent().
Since the irq_chip_*_parent() APIs internally do not check the valid parent
data is present to ensure irq_chip_eoi_parent() is only invoked for wakeup
capable GPIOs validate d->parent_data within msm_gpio_irq_eoi().
For non wakeup capable GPIOs d->parent_data will be NULL since parent
irqchip diconnects hierarchy using irq_domain_disconnect_hierarchy() and
later irq framework trims hierarchy using irq_domain_trim_hierarchy() which
makes d->parent_data as NULL.
No functional impact.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
In Amlogic A9 SoC, subordinate bank reuse other master bank is
not from bit0, and subordinate bank reuse multi master banks.
This submission implements this situation.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Update dt-binding document for pinctrl of Amlogic A9.
In Amlogic A9 SoC, a bank mux register reuse other banks.
The multiplexed part requires special processing and is
therefore incompatible with the previous SoCs.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
As Google Tensor gs101 is based off a Samsung Exynos design I've been
working on the Samsung pinctrl drivers and have an interest in helping
maintain this code.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The -Wunused-const-variable check points out a number of added
entries that are currently not referenced:
drivers/pinctrl/tegra/pinctrl-tegra238.c:1169:27: error: 'soc_gpio86_phh3_pins' defined but not used [-Werror=unused-const-variable=]
1169 | static const unsigned int soc_gpio86_phh3_pins[] = {
| ^~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra238.c:1165:27: error: 'uart5_cts_phh2_pins' defined but not used [-Werror=unused-const-variable=]
1165 | static const unsigned int uart5_cts_phh2_pins[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra238.c:1161:27: error: 'uart5_rts_phh1_pins' defined but not used [-Werror=unused-const-variable=]
1161 | static const unsigned int uart5_rts_phh1_pins[] = {
| ^~~~~~~~~~~~~~~~~~~
Remove them for now, they can just be added back if they get
used in the future.
Fixes: 25cac7292d ("pinctrl: tegra: Add Tegra238 pinmux driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Use tab instead of spaces to follow the same coding style.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260528080439.615958-5-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Keep the documentation for struct rzg2l_pinctrl_reg_cache members aligned
with the struct member order.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260528080439.615958-4-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
