Now that the legacy eeprom driver was removed, the only remaining i2c
client driver with class SPD autodetection is jc42, and this driver
supports also class HWMON. Therefore we can remove class SPD from the
supported classes of the i801 adapter driver.
Legacy class-based instantiation shouldn't be used in new code, so I
think we can remove also the generic logic that ensures that supported
classes of parent and muxed adapters don't overlap.
Note: i801 parent supports just class HWMON now, and muxed childs
class SPD, so the supported classes don't overlap.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add support for atomic transfers using polling mode with interrupts
intentionally disabled. This removes the warning introduced by commit
63b96983a5 ("i2c: core: introduce callbacks for atomic transfers")
during system reboot and power-off.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[wsa: rebased]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
at24 updates for v6.7
- support the write-lockable pages on two more models
- drop at24_get_chip_data()
- use the new __counted_by() attribute in struct at24_data
The ST M24C64-D behaves as a regular M24C64, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Add entry
for it, so users can describe that page in DT. Note that users still
have to describe the main M24C64 area separately as that is on separate
I2C address from this page.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ST M24C64-D behaves as a regular M24C64, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Document
compatible string for it, so users can describe that page in DT. Note
that users still have to describe the main M24C64 area separately as
that is on separate I2C address from this page.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ST M24C32-D behaves as a regular M24C32, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Add entry
for it, so users can describe that page in DT. Note that users still
have to describe the main M24C32 area separately as that is on separate
I2C address from this page.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ST M24C32-D behaves as a regular M24C32, except for the -D variant
which uses up another I2C address for Additional Write lockable page.
This page is 32 Bytes long and can contain additional data. Document
compatible string for it, so users can describe that page in DT. Note
that users still have to describe the main M24C32 area separately as
that is on separate I2C address from this page.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This reverts commit ae2a1f0f2c. An updated
series was sent. And this patch was not needed anymore because another
compatible entry was reused.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add support for atomic transfers using polling mode with interrupts
intentionally disabled to get rid of the warning introduced by commit
63b96983a5 ("i2c: core: introduce callbacks for atomic transfers")
during system reboot and power-off.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add SMBus PCI ID on Intel Birch Stream SoC.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Document the compatible for the CCI block found on SC7280 SoC.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Return an error code if devm_reset_control_get_exclusive() fails.
The current code returns success.
Fixes: 0e864b552b ("i2c: rcar: reset controller is mandatory for Gen3+")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add an atomic_xfer method to the driver so that it behaves correctly
when controlling a PMIC that is responsible for device shutdown.
The atomic_xfer method added is similar to the one from the i2c-mv64xxx
driver. When running an atomic_xfer a bool flag in the driver data is
set, the interrupt is not unmasked on transfer start, and the IRQ
handler is manually invoked while waiting for pending transfers to
complete.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct at24_data.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct i2c_atr.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct i2c_demux_pinctrl_priv.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
[wsa: improved blank lines]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
`info.type` is expected to be NUL-terminated judging by its use in
`i2c_new_client_device()` wherein it is used to populate `client->name`:
| strscpy(client->name, info->type, sizeof(client->name));
NUL-padding is not required and even if it was, `client` is already
zero-initialized.
Considering the two points from above, a suitable replacement is
`strscpy` [2] due to the fact that it guarantees NUL-termination on the
destination buffer without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
We expect name to be NUL-terminated based on its numerous uses with
functions that expect NUL-terminated strings.
For example in i2c-core-base.c +1533:
| dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
NUL-padding is not required as `adap` is already zero-alloacted with:
| adap = devm_kzalloc(&usbif->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
With the above in mind, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Advertise our coding style by following it :)
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
debugfs can handle error pointers in subsequent calls. So, remove the
error checks as suggested by kerneldoc of this function.
Reported-by: Minjie Du <duminjie@vivo.com>
Closes: http://patchwork.ozlabs.org/project/linux-i2c/patch/20230713101829.15548-1-duminjie@vivo.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
With some new registers, SCL can be calculated to be closer to the
desired rate. Apply the new formula for R-Car Gen3 device types.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Initially, we only needed a reset controller to make sure RXDMA works at
least once per transfer. Meanwhile, documentation has been updated. It
now says that a reset has to be performed prior every transaction, even
if it is non-DMA. So, make the reset controller a requirement instead of
being optional. And bail out if resetting fails.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
I2C core ensures in i2c_smbus_xfer() that the I2C bus lock is held when
calling the smbus_xfer callback. That's i801_access() in our case.
I think it's safe in general to assume that the I2C bus lock is held
when the smbus_xfer callback is called.
Therefore I see no need to define an own mutex.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When entering the suspend callback, at first we should ensure that
transfers are finished and I2C core can't start further transfers.
Use i2c_mark_adapter_suspended() for this purpose, and complement it
with a call to i2c_mark_adapter_resumed() in the resume path.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Now that the driver core allows for struct class to be in read-only
memory, move the i2c_dev_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Using the I2C host controller on the MT7981 SoC requires 4 clocks to
be enabled. One of them, the pmic clk, is only enabled in case
'mediatek,have-pmic' is also set which has other consequences which
are not desired in this case.
Allow defining a pmic clk even in case the 'mediatek,have-pmic' propterty
is not present and the bus is not used to connect to a pmic, but may
still require to enable the pmic clock.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In few places relevant registers are reset to their initial value on
driver load. Factor this out to new helper i801_restore_regs to avoid
code duplication.
Even though no actual problems are known, this patch may contribute
to avoiding potential issues by:
- restoring register values also in the error path of i2c_add_adapter
- making restoring registers the last step (especially in i801_remove)
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The DesignWare IP can be synthesized with the IC_EMPTYFIFO_HOLD_MASTER_EN
parameter.
In this case, when the TX FIFO gets empty and the last command didn't have
the STOP bit (IC_DATA_CMD[9]), the controller will hold SCL low until
a new command is pushed into the TX FIFO or the transfer is aborted.
When the controller is holding SCL low, it cannot be disabled.
The transfer must first be aborted.
Also, the bus recovery won't work because SCL is held low by the master.
Check if the master is holding SCL low in __i2c_dw_disable() before trying
to disable the controller. If SCL is held low, an abort is initiated.
When the abort is done, then proceed with disabling the controller.
This whole situation can happen for instance during SMBus read data block
if the slave just responds with "byte count == 0".
This puts the driver in an unrecoverable state, because the controller is
holding SCL low and the current __i2c_dw_disable() procedure is not
working. In this situation only a SoC reset can fix the i2c bus.
Co-developed-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Jonathan Borne <jborne@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Value comes from DT, so it could be 0. Unlikely, but could be.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It improves readability if we use the available helper.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Instead of trying all values, we can actually compute it as the comment
suggests. It is unclear what the comment means with "involved", it works
nicely.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use proper types and spacing.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Kernel functions goto somewhere on error conditions. Using goto for the
default path is irritating. Let's bail out on error instead and use a
proper retval.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
We have to unregister tco_pdev also if i2c_add_adapter() fails.
Fixes: 9424693035 ("i2c: i801: Create iTCO device on newer Intel PCHs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Currently we set SMBHSTCNT_LAST_BYTE only after the host has started
receiving the last byte. If we get e.g. preempted before setting
SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte
before SMBHSTCNT_LAST_BYTE is set.
Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing
SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code
is also consistent with what we do in i801_isr_byte_done().
Reported-by: Jean Delvare <jdelvare@suse.com>
Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/
Cc: stable@vger.kernel.org
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Fix an UV boot crash,
- Skip spurious ENDBR generation on _THIS_IP_,
- Fix ENDBR use in putuser() asm methods,
- Fix corner case boot crashes on 5-level paging,
- and fix a false positive WARNING on LTO kernels.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BMjT
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix an UV boot crash
- Skip spurious ENDBR generation on _THIS_IP_
- Fix ENDBR use in putuser() asm methods
- Fix corner case boot crashes on 5-level paging
- and fix a false positive WARNING on LTO kernels"
* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Remove LTO flags
x86/boot/compressed: Reserve more memory for page tables
x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
x86/ibt: Suppress spurious ENDBR
x86/platform/uv: Use alternate source for socket to node data
balancing bug, and a topology setup bug on (Intel) hybrid processors.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jIeN
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix a performance regression on large SMT systems, an Intel SMT4
balancing bug, and a topology setup bug on (Intel) hybrid processors"
* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
sched/fair: Fix SMT4 group_smt_balance handling
sched/fair: Optimize should_we_balance() for large SMT systems
The choose_32_64() macros were added to deal with an odd inconsistency
between the 32-bit and 64-bit layout of 'struct stat' way back when in
commit a52dd971f9 ("vfs: de-crapify "cp_new_stat()" function").
Then a decade later Mikulas noticed that said inconsistency had been a
mistake in the early x86-64 port, and shouldn't have existed in the
first place. So commit 932aba1e16 ("stat: fix inconsistency between
struct stat and struct compat_stat") removed the uses of the helpers.
But the helpers remained around, unused.
Get rid of them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmUGFSgACgkQiiy9cAdy
T1H8ZQwAuJhiLsTJK0lnWWxZC+KsIvTXlNKqx3VUqhJeYdxAc1tNCVjHTgdm63QA
gRA0Htt8UhUoVVIMiipW2/PHA4rrNU7i0ULXSasAL6d8pPuZfeCzoehSfFo4u2ra
bVDjfQUDtRakSU//Aj+Bv2sO77UWz0pQ5y0v2LCpPQ9Ks5TmLgxT+40uXCXf/LAe
3aBbvrgLOlt0JMXaIEaQoecMitUqajmuuq/5SVQ7lz0xvn7cCLKgk22LehtwHR0W
Ae8GdCkfFipdq+gp76CZPHO9evmRCsjmF95z56/++HdLrftYln5W/TDfjTlOZM9V
tP99hK/2EjsWL7TMCOG59w21sKuaOdBA7AV7blgWxZAbKsrBgtMEXgQxSZMiK+Vm
lKR5lGLWoujQLcnzWRh+WL7XP0ZxzitTlrlLeFxciPSGP843GRx+0oINLKL8CInr
9mTwkzlzODNKA+83yRs5+Q3i0mq161IugsRrk1NHRUsr7oXiWWIxhcqCy5N5+R2S
SfB16ql5
=WtnH
-----END PGP SIGNATURE-----
Merge tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Three small SMB3 client fixes, one to improve a null check and two
minor cleanups"
* tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix some minor typos and repeated words
smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
smb3: move server check earlier when setting channel sequence number
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmUGh1YACgkQ8vlZVpUN
gaN9lQgAqmMWu3xLwOERgVbK3CYT8WMcv0m9/by+vSwghCoPVDWWENgEgAzo4YpK
Lsp4q62wHaWs6AzvJEaJ8ryedo7e4FUHxcvp2f6dCuOPadOEZZZTa4G5fAr0kYXS
TIoaFtv6F2QVnGU6Y5lhtfYzmgLRdLL0B6MfSTYGO2MSREqxapvfxyGBQdkOuXfO
UEtrUUEqQ2GdDcKp+FRRnaUvNaTPEESY8d5eVwrMmyUhQWUQL/N2BPbFkk1TP6RG
MLDNsUZpdhZvLs6qLuR7dvO5wa2fshvRJIXlPINM0R0as5LmHqVL/ifCNkCn4W+k
ZNvdSPhqew68KHHq3sYFtm9rbZ3YOA==
=DopS
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Regression and bug fixes for ext4"
* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rec_len verify error
ext4: do not let fstrim block system suspend
ext4: move setting of trimmed bit into ext4_try_to_trim_range()
jbd2: Fix memory leak in journal_init_common()
jbd2: Remove page size assumptions
buffer: Make bh_offset() work for compound pages
