A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader.
Cc: stable@vger.kernel.org
Fixes: d223f98f02 ("drm/v3d: Add support for compute shader dispatch.")
Suggested-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260602-v3d-fix-indirect-csd-v4-2-654309e32bc0@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect
buffer and the workgroup buffer and is expected to release them before
returning. When any of the workgroup counts read from the buffer is zero,
the function bailed out early and skipped the cleanup, leaking the vaddr
mappings of both BOs.
Jump to the cleanup path instead of returning directly, so the mappings
are always dropped.
Cc: stable@vger.kernel.org
Fixes: 18b8413b25 ("drm/v3d: Create a CPU job extension for a indirect CSD job")
Suggested-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260602-v3d-fix-indirect-csd-v4-1-654309e32bc0@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Fix the following W=1 kerneldoc warnings by adding the missing parameter
descriptions for @phase0_identity and @nn_interpolation in
dcss_scaler_filter_design() and @phase0_identity in
dcss_scaler_gaussian_filter()
Warning: drivers/gpu/drm/imx/dcss/dcss-scaler.c:173 function parameter 'phase0_identity' not described in 'dcss_scaler_gaussian_filter'
Warning: drivers/gpu/drm/imx/dcss/dcss-scaler.c:270 function parameter 'phase0_identity' not described in 'dcss_scaler_filter_design'
Warning: drivers/gpu/drm/imx/dcss/dcss-scaler.c:270 function parameter 'nn_interpolation' not described in 'dcss_scaler_filter_design'
Fixes: 9021c317b7 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patch.msgid.link/20260406180013.2442096-1-yiconghui@gmail.com
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy.
Fixes: cdfad4db77 ("accel/ivpu: Add NPU profiling support")
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260529120841.135852-1-andrzej.kacprowski@linux.intel.com
Add validation that read and write indices in the firmware log buffer
are within valid bounds (< data_size) before using them. If
out-of-bounds indices are encountered (from firmware), clamp them to
safe values instead of proceeding with invalid offsets.
This prevents potential out-of-bounds buffer access when firmware
supplies invalid log indices.
Fixes: 1fc1251149 ("accel/ivpu: Refactor functions in ivpu_fw_log.c")
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260529115842.135378-1-andrzej.kacprowski@linux.intel.com
Validate that the firmware runtime memory specified in the image
header is properly aligned and sized to hold the firmware image.
This prevents errors during memory allocation and image transfer.
Fixes: 2007e210b6 ("accel/ivpu: Split FW runtime and global memory buffers")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260529120853.135876-1-andrzej.kacprowski@linux.intel.com
v3d_clean_caches() starts the cache-clean sequence by writing
V3D_L2TCACTL_TMUWCF to V3D_CTL_L2TCACTL and then polling for that bit to
clear. It does not, however, check for an L2T flush (L2TFLS) that may
still be in flight from a previous operation.
On pre-V3D 7.1 hardware, kicking off the TMU write-combiner flush while an
L2T flush is still pending can clobber bits in L2TCACTL and cause cache
inconsistencies.
Poll for L2TFLS to clear before writing L2TCACTL on V3D < 7.1, ensuring
any pending flush has completed before a new clean is issued.
Cc: stable@vger.kernel.org
Fixes: d223f98f02 ("drm/v3d: Add support for compute shader dispatch.")
Link: https://patch.msgid.link/20260530-v3d-fix-rpi4-freezes-v1-1-c2c8307da6ce@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Fix integer overflow issues in the dumb buffer creation path:
1. drm_mode_create_dumb() does not bound width, height, or bpp
before passing them to driver callbacks. Downstream helpers
(e.g. drm_gem_dma_dumb_create_internal) perform pitch/size
alignment in u32 arithmetic that can overflow for extreme
values. Add hard limits: width and height < 8192, bpp <= 32.
No legitimate software rendering use case exceeds these.
2. drm_mode_align_dumb() uses roundup(pitch, hw_pitch_align)
without checking for overflow. If pitch is near U32_MAX,
roundup() wraps to a small value, making subsequent
check_mul_overflow() pass with a much smaller pitch than
intended. Add an overflow check after roundup.
3. drm_mode_align_dumb() uses ALIGN(size, hw_size_align) which
only works correctly for power-of-two alignment values.
Replace with roundup() which works for any alignment.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Once FD_ADD() returns, the fd is live in the file descriptor table
and a thread sharing that table can close() it before DMA_BUF_TRACE()
runs. The close drops the last reference, __fput() frees the dma_buf,
and the tracepoint then dereferences dmabuf to take dmabuf->name_lock
-- slab-use-after-free.
Split FD_ADD() back into get_unused_fd_flags() + fd_install() and
emit the tracepoint between them. While the fdtable slot is reserved
with a NULL file pointer, a racing close() returns -EBADF without
entering __fput(), so the dma_buf stays alive across the trace. Same
approach as commit 2d76319c4c ("dma-buf: fix UAF in dma_buf_put()
tracepoint").
This undoes the FD_ADD() conversion done in commit 34dfce523c
("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to
hook the tracepoint safely.
Reported-by: syzbot+7f4987d0afb97dd090cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7f4987d0afb97dd090cb
Fixes: 281a226314 ("dma-buf: add some tracepoints to debug.")
Cc: stable@vger.kernel.org # 7.0.x
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260523181446.69525-1-devnexen@gmail.com
The simple_write_to_buffer() will only initialize data starting from
the *pos offset so if it's non-zero then the first part of the buffer
uninitialized. Really, if *pos is non-zero then this code won't work
so just check for that at the start of the function.
Fixes: 320323d2e5 ("accel/ivpu: Add debugfs interface for setting HWS priority bands")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/ahP24m6Mii9EDL7Q@stanley.mountain
hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one
of four message-type branches without knowing how many bytes the host
wrote into hv->recv_buf. The completion path then runs
memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that
wakes on wait_for_completion_timeout() can read up to 16 KiB of
residue from a prior message as if it were the response payload.
Pass bytes_recvd into hyperv_receive_sub() and reject any packet that
does not cover the pipe + synthvid header. A single switch on
msg->vid_hdr.type then computes the type-specific payload size: the
three completion-driving types (SYNTHVID_VERSION_RESPONSE,
SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through
to a shared exit that requires that size before memcpy/complete, while
SYNTHVID_FEATURE_CHANGE validates its own payload and returns before
reading is_dirt_needed. Unknown types are dropped.
SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills
resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT
array. Validate the fixed prefix first so resolution_count can be
read, bound it against the array, then require only the count-sized
array, so the shorter responses the host actually sends are accepted.
Only run the sub-handler when vmbus_recvpacket() returned success. The
memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE
only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead
reports the required length, which can exceed hv->recv_buf, so copying
bytes_recvd would read and write past the 16 KiB buffers. Gating on the
success return keeps the copy bounded. The nonzero-return path is itself
a malformed-message case and is now logged rather than silently skipped;
channel recovery is not attempted.
Rejected packets are reported via drm_err_ratelimited() rather than
silently dropped, matching the CoCo-hardened pattern in
hv_kvp_onchannelcallback().
Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Berkant Koc <me@berkoc.com>
Assisted-by: Claude:claude-opus-4-7 berkoc-pipeline
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/8200dbc199c7a9b75ac7e8af6c748d2189b5ebd5.1779542874.git.me@berkoc.com
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults.
Signed-off-by: Berkant Koc <me@berkoc.com>
Assisted-by: Claude:claude-opus-4-7 berkoc-pipeline
Fixes: 76c56a5aff ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Cc: stable@vger.kernel.org # 5.14+
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/6945b22419c7d404b4954a113de2ac9c900dba93.1779542874.git.me@berkoc.com
rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via
drm_gem_handle_create() early on, then performs several operations that
can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after
the handle is live, the error path calls drm_gem_shmem_object_free()
which kfree's the object without removing the handle from the IDR.
This leaves a dangling handle pointing to freed slab memory. Any
subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls
drm_gem_object_lookup() and dereferences freed memory (UAF).
Fix by moving drm_gem_handle_create() to after all fallible operations
succeed, matching the pattern used by panfrost, lima, and etnaviv.
Also fix drm_mm_insert_node_generic() whose return value was silently
overwritten by iommu_map_sgtable() on the next line. Add the missing
error check.
[tomeu: Move handle creation to the very end]
Fixes: 658ebeac33 ("accel/rocket: Add IOCTL for BO creation")
Reported-by: Dhabaleshwar Das <dhabal123@gmail.com>
Signed-off-by: Dhabaleshwar Das <dhabal123@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20260521165720.2113571-1-tomeu@tomeuvizoso.net
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences().
Reported-by: syzbot+72bd3dd3a5d5f39a0271@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=72bd3dd3a5d5f39a0271
Fixes: 5cfd31c5b3 ("drm/virtio: fix virtio_gpu_cursor_plane_update().")
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260519082247.34470-1-kartikey406@gmail.com
Ubuf pages should not be mmaped or exported. Remove the ubuf mmap callback
and return -EOPNOTSUPP when exporting ubuf objects.
ubuf vmap is also removed for there is not a real use case yet.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260518155706.937461-1-lizhi.hou@amd.com
If devm_request_threaded_irq() fails after drm_bridge_add(), remove the
bridge before returning.
Keep drm_bridge_add() rather than devm_drm_bridge_add(): registration is
tied to the STDP4028 device while ge_b850v3_register() may complete from
either I2C probe; devm would not unwind the bridge if the other client's
probe fails.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Fixes: fcfa0ddc18 ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20260430195700.80317-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Use devm_drm_bridge_add() so the bridge is released if probe
fails after registration, and drop drm_bridge_remove() in chipone_i2c_probe.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Fixes: 8dde6f7452 ("drm: bridge: icn6211: Add I2C configuration support")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260430194944.78119-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
v3d_get_cpu_indirect_csd_params() takes a reference to the indirect BO via
drm_gem_object_lookup() and stashes it in cpu_job->indirect_csd.indirect,
but nothing on the CPU job teardown path ever drops that reference.
Drop the extra reference in v3d_cpu_job_free(). The NULL check covers ioctl
errors before the lookup ran and CPU job types other than
V3D_CPU_JOB_TYPE_INDIRECT_CSD, which leave the field zero-initialised.
Cc: stable@vger.kernel.org
Fixes: 18b8413b25 ("drm/v3d: Create a CPU job extension for a indirect CSD job")
Assisted-by: Claude:claude-opus-4.7
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260515-v3d-cpu-job-leaks-v1-2-7f147cbbf935@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and
performance query arrays after v3d_job_cleanup(), which drops the job's
last reference and frees cpu_job. Reading cpu_job at that point is a
use-after-free. Also, on the early v3d_job_init() failure path, it is a
NULL dereference, since v3d_job_deallocate() zeroes the local pointer.
In the success path, the arrays are released from the scheduler's
.free_job callback, but on the error path, they are freed manually, as
the job was never pushed to the scheduler. While the success path deals
with this correctly, the fail path doesn't.
On top of that, the manual kvfree() calls only free the array storage;
they don't drm_syncobj_put() the per-query syncobjs that
v3d_timestamp_query_info_free() and v3d_performance_query_info_free()
release on the success path. So the same fail path that triggers the
use-after-free also leaks one syncobj reference per query.
Unify the CPU job teardown into the CPU job's kref destructor, mirroring
v3d_render_job_free(). The scheduler's .free_job slot reverts to the
generic v3d_sched_job_free() and the fail label drops the manual
kvfree() calls, leaving a single teardown path that is reached from both
the scheduler and the ioctl error path. That removes the use-after-free,
the NULL dereference, and the syncobj leak by construction.
Cc: stable@vger.kernel.org
Fixes: 9ba0ff3e08 ("drm/v3d: Create a CPU job extension for the timestamp query job")
Assisted-by: Claude:claude-opus-4.7
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260515-v3d-cpu-job-leaks-v1-1-7f147cbbf935@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Recently, a few races have been discovered in the GEM LRU logic, all
of them caused by the fact the LRU lock is accessed through
gem->lru->lock, and that very same lock also protects changes to
gem->lru, leading to situations where gem->lru needs to first be
accessed without the lock held, to then get the lru to access the lock
through and finally take the lock and do the expected operation.
Currently, the only driver making use of this API (MSM) declares a
device-wide lock, and the user we're about to add (panthor) will
do the same. There's no evidence that we will ever have a driver
that wants different pools of LRUs protected by different locks under
the same drm_device. So we're better off moving this lock to drm_device
and always locking it through obj->dev->gem_lru_mutex, or directly
through dev->gem_lru_mutex.
If anyone ever needs more fine-grained locking, this can be revisited
to pass some drm_gem_lru_pool object representing the pool of LRUs
under a specific lock, but for now, the per-device lock seems to be
enough.
Fixes: e7c2af13f8 ("drm/gem: Add LRU/shrinker helper")
Reported-by: Chia-I Wu <olvaffe@gmail.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/86
Reviewed-by: Rob Clark <rob.clark@oss.qualcomm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20260518-panthor-shrinker-fixes-v4-1-1920234470d5@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The it66121_ctx structure has a gpio_reset field, and it66121_hw_reset()
calls gpiod_set_value() on it. However, the GPIO descriptor is never
acquired via devm_gpiod_get(), leaving gpio_reset as NULL throughout
the driver lifetime.
gpiod_set_value() silently returns when passed a NULL descriptor, so
the hardware reset sequence in it66121_hw_reset() is a no-op. This
leaves the chip in an undefined state at probe time, which can prevent
it from responding on the I2C bus.
The DT binding marks reset-gpios as a required property, so all
compliant device trees provide this GPIO. Add the missing
devm_gpiod_get() call after enabling power supplies and before the
hardware reset, so the chip is properly reset with power applied.
Fixes: 988156dc2f ("drm: bridge: add it66121 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Julien Chauveau <chauveau.julien@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260324193011.16583-1-chauveau.julien@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
lsdc_pci_probe() initializes KMS polling before setting up vblank support,
requesting the IRQ and registering the DRM device. If any of those later
steps fails, probe returns without finalizing polling. The driver also
never finalizes polling on regular removal.
Use drmm_kms_helper_poll_init() so polling is tied to the DRM device
lifetime and automatically finalized on probe failure and device removal.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: f39db26c54 ("drm: Add kms driver for loongson display controller")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260513065706.23803-1-mhun512@gmail.com
Apply the same fix as b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout()
infinite LRU walk on swapout failure") to the ttm_bo_shrink() path.
Move del_bulk_move from before the backup to after success only,
using ttm_resource_del_bulk_move_unevictable() since the resource
is now unevictable once fully backed up.
Fixes: 70d645deac ("drm/ttm: Add helpers for shrinking")
Cc: Christian König <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v6.15+
Assisted-by: GitHub_Copilot:claude-opus-4.6
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260511162443.24352-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
dmem_cgroup_try_charge() returns -EAGAIN when the cgroup limit is
hit and the charge fails. TTM has no concept of -EAGAIN from resource
allocation; -ENOSPC is the canonical error meaning "no space, try
eviction". Convert at the source in ttm_resource_alloc() so no caller
needs to handle an unexpected error code, and clean up the now-redundant
-EAGAIN check in ttm_bo_alloc_resource().
Without this, -EAGAIN escaping ttm_resource_alloc() during an eviction
walk causes the walk to terminate early instead of continuing to the
next candidate.
Cc: Friedrich Vock <friedrich.vock@gmx.de>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Tejun Heo <tj@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.14+
Fixes: 2b624a2c18 ("drm/ttm: Handle cgroup based eviction in TTM")
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhrost.se>
Link: https://patch.msgid.link/20260508160920.230339-1-thomas.hellstrom@linux.intel.com
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
Make sure to drop the references taken by i2c_get_adapter() when falling
back to allocating an adapter as well as on late errors to allow the
looked up adapter to be deregistered.
Fixes: 1b082ccf59 ("gma500: Add Oaktrail support")
Cc: stable@vger.kernel.org # 3.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260508144446.59722-4-johan@kernel.org
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
The error handling does not separate these cases so on a late init
failure it will try to deregister and free also an adapter that had
previously been registered. Since i2c_get_adapter() takes another
reference to the adapter, deregistration hangs indefinitely while
waiting for the reference to be released.
Fix this by only destroying adapters allocated during LVDS init on
errors.
Fixes: a57ebfc0b4 ("drm/gma500: Make oaktrail lvds use ddc adapter from drm_connector")
Cc: stable@vger.kernel.org # 6.0
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260508144446.59722-3-johan@kernel.org
Make sure to drop the reference taken to the I2C adapter (and its
module) when setting up HDMI to allow the adapter to be deregistered.
Fixes: 1b082ccf59 ("gma500: Add Oaktrail support")
Cc: stable@vger.kernel.org # 3.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patch.msgid.link/20260508144446.59722-2-johan@kernel.org
The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to
(re)mapping beyond the VMA if the BO is too large. This can cause use
after free issues when munmap() unmaps only the VMA region and not the
additional mappings. To prevent this, check the remaining size of the
VMA before remapping and truncate the remapped length if sg->length is
too large.
Reported-by: Lukas Maar <lukas.maar@tugraz.at>
Fixes: ff13be8303 ("accel/qaic: Add datapath")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: fix braces from checkpatch --strict]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260430193858.1178641-1-zachary.mckevitt@oss.qualcomm.com
imx8qxp_pxl2dpi_get_available_ep_from_port() returns ERR_PTR()
on errors. imx8qxp_pxl2dpi_find_next_bridge() stores its return
value in a __free(device_node) variable before checking IS_ERR().
When the function returns on the error path, the cleanup action calls
of_node_put() on the ERR_PTR() value.
Do not let a device_node cleanup variable hold error pointers. Change
imx8qxp_pxl2dpi_get_available_ep_from_port() to return an int and pass
the endpoint node through an output argument. Initialize the output
argument to NULL so callers hold either NULL on error paths or a valid
device_node pointer on successful path.
Fixes: ceea3f7806 ("drm/bridge: imx8qxp-pxl2dpi: simplify put of device_node pointers")
Cc: stable@vger.kernel.org
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260507100604.667731-1-lgs201920130244@gmail.com
Signed-off-by: Liu Ying <victor.liu@nxp.com>
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard.
Reported-by: Jatin Kataria <jkataria@netflix.com>
Fixes: fc5d96670e ("drm/ttm: Move swapped objects off the manager's LRU list")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: <stable@vger.kernel.org> # v6.13+
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260428094442.16985-1-thomas.hellstrom@linux.intel.com
dma_resv_wait_timeout() returns a positive 'remaining jiffies' value
on success, 0 on timeout, and -errno on failure.
panfrost_ioctl_wait_bo() returns this 'long' result from an int-typed
ioctl handler, so positive values reach userspace as bogus errors.
Explicitly set ret to 0 on the success path.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gyeyoung Baek <gye976@gmail.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/fe33f82fded7be1c18e2e0eb2db451d5a738cf39.1776581974.git.gye976@gmail.com
Signed-off-by: Steven Price <steven.price@arm.com>
dma_resv_wait_timeout() returns a positive 'remaining jiffies' value
on success, 0 on timeout, and -errno on failure.
rocket_ioctl_prep_bo() returns this 'long' result from an int-typed
ioctl handler, so positive values reach userspace as bogus errors.
Explicitly set ret to 0 on the success path.
Fixes: 525ad89dd9 ("accel/rocket: Add IOCTLs for synchronizing memory accesses")
Cc: stable@vger.kernel.org
Signed-off-by: Gyeyoung Baek <gye976@gmail.com>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/c0ebf83b345721701b22d8f5bc41c52c0ecf5e16.1776581974.git.gye976@gmail.com
Signed-off-by: Steven Price <steven.price@arm.com>
bochs_pci_probe() allocates the DRM device with devm_drm_dev_alloc(),
which registers a devres action to drop the initial DRM device reference
on driver detach or probe failure.
The error path currently calls drm_dev_put() manually. If probe then
returns an error, devres will run the registered release action and put
the same device again, after the first put may already have released it.
Return the probe error directly and let devres own the final put.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Fixes: 04826f5886 ("drm/bochs: Allocate DRM device in struct bochs_device")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424123506.32275-1-mhun512@gmail.com
Use devm_drm_bridge_add() so the bridge is released if probe fails after
registration, and drop the manual drm_bridge_remove() in remove().
Check the return value of devm_drm_bridge_add().
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Fixes: 576d72fbfb ("drm/exynos: mic: add a bridge at probe")
Cc: stable@vger.kernel.org
Reviewed-by: Raphaël Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260423200622.325076-2-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes screen unblanking (after blanking once) on
mt8188-geralt-ciri-sku1 device.
Cc: stable@vger.kernel.org # 6.11+
Fixes: 0ef94554dc ("drm/panel: himax-hx83102: Break out as separate driver")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260425165751.1716569-1-zhengxingda@iscas.ac.cn
When preparing the panel, it seems that it always expects commands to be
transferred in LP mode. However, the disable function removes the
MIPI_DSI_MODE_LPM flag, and no other function re-adds it.
As the unprepare function contains no DSI commands, re-adding the flag
just after disabling the panel should be safe. Add the code re-adding
the flag after the two commands for disabling the panel are sent.
This fixes error messages shown in kernel log when unblanking on
mt8183-kukui-kodama-sku32 device.
Cc: stable@vger.kernel.org
Fixes: a869b9db7a ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260503091708.1079962-1-zhengxingda@iscas.ac.cn
mipi_dsi_dcs_set_display_on() returns an error code, but feiyang_enable()
currently ignores it and always reports success.
Return the DCS command result so callers can observe enable failures.
Signed-off-by: Christian Van <cvan20191@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260425053948.117714-1-cvan20191@gmail.com
Like a number of other panel drivers, this newly merged driver
needs DRM_DISPLAY_DSC_HELPER to be enabled:
arm-linux-gnueabi-ld: drivers/gpu/drm/panel/panel-himax-hx83121a.o: in function `himax_prepare':
panel-himax-hx83121a.c:(.text+0x1024): undefined reference to `drm_dsc_pps_payload_pack'
Fixes: a7c61963b7 ("drm/panel: Add Himax HX83121A panel driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260413071043.3829868-1-arnd@kernel.org
Check devm_drm_panel_alloc() return value for ERR_PTR instead of NULL.
devm_drm_panel_alloc() returns an ERR_PTR on failure, never NULL. Using
a NULL check skips the error path and may cause a NULL pointer
dereference.
Fixes: a7c61963b7 ("drm/panel: Add Himax HX83121A panel driver")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260327021728.647182-1-nichen@iscas.ac.cn
When xa_alloc_cyclic() failed in etnaviv_sched_push_job(), the error
path skipped drm_sched_entity_push_job(). This is a violation of the DRM
scheduler contract, as once a job has been armed with drm_sched_job_arm(),
it must be pushed with drm_sched_entity_push_job(). From the DRM
scheduler documentation,
"""
drm_sched_job_arm() is a point of no return since it initializes the
fences and their sequence number etc. Once that function has been called,
you *must* submit it with drm_sched_entity_push_job() and cannot simply
abort it by calling drm_sched_job_cleanup().
"""
Fix this by splitting the fence ID allocation into two phases: first,
alloc an xarray slot before arming the job (which can fail), then fill in
the actual fence with xa_store() after arming. This way, allocation
failures are handled before the job is armed, and once armed, the job is
always pushed to the scheduler.
This also fixes a double call to drm_sched_job_cleanup(), as both
etnaviv_sched_push_job() and its caller would call it on failure.
Fixes: 764be12345 ("drm/etnaviv: convert user fence tracking to XArray")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260402193424.2023318-1-mcanal@igalia.com
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Use devm_drm_bridge_add() so the bridge is released if probe fails after
registration, and drop the manual drm_bridge_remove() in remove().
Check the return value of devm_drm_bridge_add().
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Fixes: d28726efc6 ("drm/sti: hda: add bridge before attaching")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Raphaël Gallais-Pou <rgallaispou@gmail.com>
Link: https://patch.msgid.link/20260423200622.325076-1-osama.abdelkader@gmail.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
tda998x_edid_read() returns a const struct drm_edid pointer, but when
tda998x_edid_delay_wait() fails (process killed while waiting for the
HPD timeout), the integer literal 0 is returned instead of NULL,
triggering a sparse warning: "Using plain integer as NULL pointer"
Replace 0 with NULL to fix the sparse warning.
Fixes: c76a8be4fe ("drm/bridge: tda998x: Add support for DRM_BRIDGE_ATTACH_NO_CONNECTOR")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604172257.Imo6GOH9-lkp@intel.com/
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260417155446.1068893-1-kory.maincent@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
of_get_property() returns a pointer to big-endian (__be32) data, but
port_data in tda998x_get_audio_ports() was declared as const u32 *,
causing a sparse endianness type mismatch warning. Fix the declaration
to use const __be32 *.
Fixes: 7e567624dc ("drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding")
Cc: stable@vger.kernel.org
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260428090457.121894-1-kory.maincent@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
When the damage area resulting from a dirty memory range spans a single
scanline, the width of the rectangle is calculated dynamically because it
may not coincide with the framebuffer width.
If the dirty range ends exactly at the end of the scanline, the `bit_end`
variable is incorrectly assigned a 0 value, which results in a bogus clip
rectangle where the x2 coordinate is 0. This prevents the dirty scanline
from being flushed to the hardware.
Change the calculation of the `bit_end` value to fix the x2 coordinate
value in the above edge case.
Fixes: ded74cafee ("drm/fb-helper: Clip damage area horizontally")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260210173545.733937-1-flavra@baylibre.com
drm_kms_helper_poll_init() initializes the output polling work and
enables polling for the DRM device. qxl enables polling before calling
drm_dev_register(), but the drm_dev_register() failure path tears down
the modeset and device state without disabling the polling helper.
The remove path also unregisters and shuts down the DRM device without
first disabling the polling helper. Add matching drm_kms_helper_poll_fini()
calls in both paths so the delayed polling work is cancelled before qxl
tears down the associated modeset/device state.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5ff91e4426 ("qxl: use drm helper hotplug support")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424112543.57819-1-mhun512@gmail.com
TTM pool shrinking frees pages by calling __free_pages() directly,
which bypasses updates to NR_GPU_ACTIVE and leaves GPU MM accounting
out of sync.
Introduce a helper, __free_pages_gpu_account(), and use it for all page
frees in ttm_pool.c so GPU MM statistics are updated consistently.
Reported-by: Kenneth Crudup <kenny@panix.com>
Fixes: ae80122f38 ("drm/ttm: use gpu mm stats to track gpu memory allocations. (v4)")
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Kenneth Crudup <kenny@panix.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260502065338.2720646-1-matthew.brost@intel.com
The UE and UE_NF cases check ce_count against UINT_MAX before incrementing
their respective counters. This is logically incorrect and prevents
ue_count and ue_nf_count from incrementing when ce_count reaches UINT_MAX.
Fixes: c11a50b170 ("accel/qaic: Add Reliability, Accessibility, Serviceability (RAS)")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260410112015.592546-1-alok.a.tiwari@oracle.com
This reverts commit 20e0c19780.
Despite claiming to add GA100 support, that commit actually has quite
a few problems. It falsely claims that there is no VBIOS. GA100 does
have a VBIOS, but it has no display engine, so it cannot use the
PRAMIN method the read VBIOS and must fall back to using PROM.
For whatever reason, the VBIOS on GA100 has an "Init-from-ROM"
(IFR) header where the PCI Expansion ROM would normally be found.
So to find that ROM, Nouveau needs to parse the IFR header.
The commit also falsely claimed that there is no graphics (GR) engine.
So rather than try to fix that commit, just revert it and start over
from scratch.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260430223838.2530778-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Prevent re-exporting of imported GEM buffers by adding a custom
prime_handle_to_fd callback that checks if the object is imported
and returns -EOPNOTSUPP if so.
Re-exporting imported GEM buffers causes loss of buffer flags settings,
leading to incorrect device access and data corruption.
Reported-by: Yametsu <yam3tsu@gmail.com>
Fixes: 57557964b5 ("accel/ivpu: Add support for userptr buffer objects")
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.19+
