PMFW will manage RAS eeprom data by itself, add new interface to read
eeprom data via PMFW, we can read part of records by setting index.
v2: use IPID parse interface.
pa is not used and set it to a fixed value.
v3: optimize the null pointer check for IPID parse interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can call it in other blocks.
v2: add a new IPID parse interface for umc and we can
implement it for each ASIC.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit c760bcda83 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda83 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_device_health_check fails, amdgpu_ras_pre_reset
will not be called and therefore amdgpu_ras_post_reset
cannot be called either.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the condition to not wait for
the queue response for unmap, if the gpu is in reset.
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unref bo after amdgpu_bo_reserve() failure as it has
called amdgpu_bo_ref() already
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
initialize max record count and record offset after table reset
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get and check the pmfw eeprom feature bit to
decide if pmfw eeprom is supported
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add check function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add initialization function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adapt reset function for pmfw eeprom
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we don't end up initializing the fences, free them when
we free the job. We can't set the hw_fence to NULL after
emitting it because we need it in the cleanup path for the
submit direct case.
v2: take a reference to the fences if we emit them
v3: handle non-job fence in error paths
Fixes: db36632ea5 ("drm/amdgpu: clean up and unify hw fence handling")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During gpu reset, all GPU-related resources are
inaccessible. To avoid affecting ras functionality,
suspend ras module before gpu reset and resume
it after gpu reset is complete.
V2:
Rename functions to avoid misunderstanding.
V3:
Move flush_delayed_work to amdgpu_ras_process_pause,
Move schedule_delayed_work to amdgpu_ras_process_unpause.
V4:
Rename functions.
V5:
Move the function to amdgpu_ras.c.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add wrapper functions for pmfw eeprom interface, for these interfaces
to be easily and safely called
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add function to check if pmfw is supported, skip eeprom
check and recover when pmfw eeprom is supported
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add functions to get smu ras driver
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
implement ras_smu_drv interface for smu v13.0.12
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new message definitions for pmfw eeprom interface
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fix regression report on gfx8, which requires the exhaustive search
path for signaled event.
The high CPU usage of KFD interrupt wq issue is gone after HIP/ROCr add
option to reduce HW event interrupts, safe to revert this optimization
patch now.
This reverts commit de844846f7.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If process is killed. the vm entity is stopped, submit pt update job
will trigger the error message "*ERROR* Trying to push to a killed
entity", job will not execute.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ras support for umc v12_5_0.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ras support for nbio v7_9_1.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the flows for S0ix. There is no need to stop
rlc or reintialize PMFW in S0ix.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a schema similar to gpu metrics v1.9 for partition metrics also. It
will have field type encoded followed by the field value(s). The
attribute ids used will be shared with gpu metrics. The structure
definition is only to distinguish between gpu metrics and partition
metrics though both gpu metrics v1.9 and partition metrics v1.1 follow
the same definition.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill and publish GPU metrics in v1.9 format for SMUv13.0.12 SOCs
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure the bo is valid before using it.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BO's reservation object must be locked before using
amdgpu_vm_bo_update_shared otherwise dma_resv_assert_held will
complain in amdgpu_vm_update_shared.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise it is possible that between dropping the status lock and
locking the BO that the BO is freed up.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
../ras/rascore/ras_cper.c: In function ‘cper_generate_fatal_record.isra’:
../ras/rascore/ras_cper.c:75:36: error: ‘%llX’ directive output may be truncated writing between 1 and 14 bytes into a region of size between 0 and 7 [-Werror=format-truncation=]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~
../ras/rascore/ras_cper.c:75:32: note: directive argument in the range [0, 72057594037927935]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~
../ras/rascore/ras_cper.c:75:9: note: ‘snprintf’ output between 4 and 27 bytes into a destination of size 9
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
76 | RAS_LOG_SEQNO_TO_BATCH_IDX(trace->seqno));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../ras/rascore/ras_cper.c: In function ‘cper_generate_runtime_record.isra’:
../ras/rascore/ras_cper.c:75:36: error: ‘%llX’ directive output may be truncated writing between 1 and 14 bytes into a region of size between 0 and 7 [-Werror=format-truncation=]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~
../ras/rascore/ras_cper.c:75:32: note: directive argument in the range [0, 72057594037927935]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~
../ras/rascore/ras_cper.c:75:9: note: ‘snprintf’ output between 4 and 27 bytes into a destination of size 9
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
76 | RAS_LOG_SEQNO_TO_BATCH_IDX(trace->seqno));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
- HDCP2 FW locality check refactors
- Fix black screen issue with HDMI output
- Increase IB mem size
- Revert max buffered cursor size to 64
- Extend inbox0 lock to run Replay / PSR
- Refactor VActive implementation
- Add Pstate viewport reduction
- Persist stream refcount through restore
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Release hightlights
DCN35/36
* Dynamically clock gate before and after prefetch
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This fixes the black screen issue on certain APUs with HDMI,
accompanied by the following messages:
amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info
frame on connector DP-1: -22
amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm]
Cannot find any crtc or sizes
Fixes: 489f0f600c ("drm/amd/display: Fix DVI-D/HDMI adapters")
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase IB mem size to match size of largest structure that will
use IB transfer between driver and DMU.
Reviewed-by: Oleh Kuzhylnyi <oleh.kuzhylnyi@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The buffered cursor cap is expressed assuming a square cursor, and usage
of the cursor buffer is limited by the request size. For greater than 32
pixels, the request size is fixed at 256 bytes, so the maximum width
must be floored to the nearest 256th byte. At 4bpp this means even with
24kB DCN4 can only hold a 64x64 cursor in the buffer as even 65 pixels
would require 512 bytes per line instead of 256.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Overwriting the refcount on stream restore can lead to double-free errors
or memory leaks if an unbalanced number of retains and releases occurs
between a backup and restore.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Refactors VActive accounting in PMO, and breaks down fill time
requirement by P-State type as it can result in drasitcally different
bandwidth requirements depending on the blackout length.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
P-state can refer to different things like UCLK P-state, PPT, or temp read
Update naming for clarity
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The inbox1 infrastructure is deprecated, so to support display
power features requiring a DMUB interlock moving forward extend
the inbox0 locking conditions to also include Replay or PSR.
[How]
Implemented a series of changes to improve HW lock handling:
- Deprecated should_use_dmub_inbox1_lock() and guarded it with
DCN401 flag.
- Migrated lock checks into inbox0 helpers and added PSR/Replay
enablement checks to ensure correct behavior.
- Updated HWSS fast update path to acquire HW lock as needed
using the new helpers.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Andrew Mazour <Andrew.Mazour@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There are some new changes for HDCP2 firmware locality check. The
implementation doesn't perfectly fit the intended design and clarity.
1. Clarify and consolidate variable responsibilities.
The previous implementation introduced the following variables:
- config.ddc.funcs.atomic_write_poll_read_i2c (optional pointer)
- hdcp->config.ddc.funcs.atomic_write_poll_read_aux (optional pointer)
- hdcp->connection.link.adjust.hdcp2.force_sw_locality_check (bool)
- hdcp->config.debug.lc_enable_sw_fallback (bool)
- use_fw (bool)
They will be used together to determine two operations:
- Whether to use FW locality check
- Whether to use SW fallback on FW locality check failure
The refactor streamlines this by introducing two variables in the hdcp2
link adjustment, while ensuring function pointers are always assigned
and remain independent from policy decisions:
- use_fw_locality_check (bool) -> true if fw locality should be used.
- use_sw_locality_fallback (bool) -> true to reset use_fw_locality_check
back to false and retry on fw locality check failure.
2. Mixed meanings of l_prime_read transition input
l_prime_read originally means if l_prime is read when sw locality check
is used. When FW locality check is used, l_prime_read means if lc init
write, l prime poll and l_prime read combo operation is successful. The
mix of meanings is confusing. The refactor introduces a new variable
l_prime_combo_read to isolate the second meaning into its own variable.
3. Missing specific error code on firmware locality error.
The original change reuses the generic DDC failure error code when
firmware fails to return locality check result. This is not ideal as
DDC failure indicates an error occurred during an I2C/AUX transaction.
FW locality failure could be caused by polling timeout in firmware or
failure to acquire firmware access. Which sits at a higher level of
abstraction above DDC hardware. An incorrect error code could mislead
the debug into a wrong direction.
4. Correcting misplaced comments. The previous implementation of the
firmware locality check resulted in some comments in hdcp2_transition
being incorrectly positioned. This refactor relocates those comments to
their appropriate locations for better clarity.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds robust reset handling for user queues (userq) to improve
recovery from queue failures. The key components include:
1. Queue detection and reset logic:
- amdgpu_userq_detect_and_reset_queues() identifies failed queues
- Per-IP detect_and_reset callbacks for targeted recovery
- Falls back to full GPU reset when needed
2. Reset infrastructure:
- Adds userq_reset_work workqueue for async reset handling
- Implements pre/post reset handlers for queue state management
- Integrates with existing GPU reset framework
3. Error handling improvements:
- Enhanced state tracking with HUNG state
- Automatic reset triggering on critical failures
- VRAM loss handling during recovery
4. Integration points:
- Added to device init/reset paths
- Called during queue destroy, suspend, and isolation events
- Handles both individual queue and full GPU resets
The reset functionality works with both gfx/compute and sdma queues,
providing better resilience against queue failures while minimizing
disruption to unaffected queues.
v2: add detection and reset calls when preemption/unmaped fails.
add a per device userq counter for each user queue type.(Alex)
v3: make sure we hold the adev->userq_mutex when we call amdgpu_userq_detect_and_reset_queues. (Alex)
warn if the adev->userq_mutex is not held.
v4: make sure we have all of the uqm->userq_mutex held.
warn if the uqm->userq_mutex is not held.
v5: Use array for user queue type counters.(Alex)
all of the uqm->userq_mutex need to be held when calling detect and reset. (Alex)
v6: fix lock dep warning in amdgpu_userq_fence_dence_driver_process
v7: add the queue types in an array and use a loop in amdgpu_userq_detect_and_reset_queues (Lijo)
v8: remove atomic_set(&userq_mgr->userq_count[i], 0).
it should already be 0 since we kzalloc the structure (Alex)
v9: For consistency with kernel queues, We may want something like:
amdgpu_userq_is_reset_type_supported (Alex)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
