If the device was powered off during suspend, we need to reload the
firmware in resume which also means that we need to reconfigure it.
It could be tempting to just set IWL_MVM_STATUS_HW_RESTART_REQUESTED
but that would leave IWL_MVM_STATUS_IN_HW_RESTART set forever since that
recovery is not managed by mac80211.
Just call iwl_mvm_restart_cleanup() from device_powered_off().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714165826.dc33533ac962.I6d7cca9c4e5643a477eae1d0a4f5fc83a10d0ee7@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
The smart fifo is a feature in the firmware configured by the driver.
The driver keeps a state to remember what was the last configuration
sent to the firmware. Obviously, if the firmware stops, we need to
reconfigure the smart fifo. Since we didn't reset that state upon
firmware stop, we thought the firmware is already properly
configured and we didn't send the smart fifo configuration command
as part of the init sequence.
Reset the smart fifo state in iwl_mvm_stop_device() so that we
will properly send the command during the init that will come
later.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714165826.7d3c5efe2d1a.I16b23c328a677257257f695fa6f439e41fbcd081@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Add support for LARI_CONFIG_CHANGE version 14 and populate
the newly added BIOS-related fields in the command payload.
Extend the version 14 command layout with UHB extension, puncturing and
WBEM metadata fields, update command-size handling for version negotiation,
and wire the new data into the LARI configuration flow. Track WBEM and
puncturing source/revision in fw runtime, set them when loading ACPI or
UEFI tables, and pass the headers to firmware. Update send conditions,
debug traces, and related documentation/comments to match the new format.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20260714165826.c73d2fbebbfe.I93af7c456f04ef10d03646a43aaeb1858ecdc36d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
LARI_CONFIG_CHANGE command version 13 and above accepts raw DSM
values by default in firmware, so FW_ACCEPTS_RAW_DSM_TABLE should
not gate DSM bitmap handling for these versions.
Set has_raw_dsm_capa based on command version (version 13 and above
is true) with TLV fallback for older command versions. Also update TLV
kernel-doc to mark this capability obsolete for LARI command
version 13 and above.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Avinash Bhatt <avinash.bhatt@intel.com>
Link: https://patch.msgid.link/20260714165826.12c8b407e115.I6809041f1eb52b7fafe9172ca3e47323d43cc30a@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Avoid indexing txq arrays and queue-used bitmaps with an
invalid queue ID by adding an early bounds check in
iwl_trans_pcie_txq_enable().
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714165826.273be072f5ff.I0d6c36a4c06bdbb4655164c7792da32b6143731e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
When we fail to load the fw during op-mode start, we purge the list
of the async handlers but we don't cancel the work.
Same when we stop the op-mode.
Before freeing wiphy, we need to cancel/flush any pending wiphy work,
otherwise the work will fire with a freed memory.
cfg80211 will do it anyway, but it will warn.
Cancel the work in those cases.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260714165826.07aa49f755a2.I734a27b1b0eeb5b0e821aee3318fee8dc0a6bc03@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
MONITOR_NOTIF link_id is firmware-provided. Validate link_id range
with IWL_FW_CHECK before vif lookup. Payload length is already
checked by RX_HANDLER.
Use iwl_mvm_rcu_dereference_vif_id which does all we need which allows
us to drop iwl_mvm_get_vif_by_macid.
Assisted-by: GitHubCopilot:gpt-5.3-codex
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714165826.7601d05649a4.I237f58a007af761468057c9c09039953a3bb37da@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Fix a harmless mistake in the wake packet management code in the d3
wakeup flow. If the FCS is truncated, we want to detect it, but we
cleared the icvlen before updating the truncated variable that holds the
number of bytes having been truncated.
Fix that.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714165826.a7d094168ed3.I1a4d13f276c7e75514ab2032ae387873337470b8@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
A host command that is bigger than the allowed payload length should be
sent with the NOCOPY flag. If it is sent without, we will get a warning.
We do know at compile time what is the maximum size of a hcmd payload that
the transport supports, so in order to catch bugs early,
add a compile time check to iwl_*_send_cmd_pdu to catch that.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260714165826.a549b9499e3e.Id1a95bbbf92b5862862becaf57419bb9fe1385e5@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
iwl_uefi_reduce_power_parse() reads an iwl_sku_id from an
IWL_UCODE_TLV_PNVM_SKU payload after only checking that the generic TLV
payload is present.
A short type-specific payload can therefore make the three data[] reads
extend beyond the TLV. Reject SKU TLVs shorter than the structure before
accessing it.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260715135916.24417-2-pengpeng@iscas.ac.cn
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
iwl_pnvm_parse() reads an iwl_sku_id from an
IWL_UCODE_TLV_PNVM_SKU payload after only checking that the generic TLV
payload is present.
A short type-specific payload can therefore make the three data[] reads
extend beyond the TLV. Reject SKU TLVs shorter than the structure before
accessing it.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260715135916.24417-1-pengpeng@iscas.ac.cn
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
In iwl_op_mode_dvm_start(), jumping to out_free_eeprom currently bypasses
the out_free_eeprom_blob label. Consequently, error paths triggered after
successfully parsing the EEPROM free priv->nvm_data but leak
priv->eeprom_blob.
Fix this memory leak by reordering the error handling labels so
that out_free_eeprom falls through to out_free_eeprom_blob.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have
supported Intel DVM wireless hardware and firmware to test with, no
runtime testing was able to be performed.
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260624084404.570703-1-dawei.feng@seu.edu.cn
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Correct a minor grammatical error inside the kernel-doc comments
of error-dump.h where "configuration" was misspelled as "configuraiton".
Signed-off-by: Praveen Rajendran <praveenrajendran2009@gmail.com>
Link: https://patch.msgid.link/20260703140757.3372-1-praveenrajendran2009@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
If iwl_txq_gen2_build_tfd fails, we return -1, which will cause calling
code to dispose of the skb one way or another. Remove any reference to
that skb from the txq entries so that nothing will try to access it
later.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20260214190509.2098565-1-greearb@candelatech.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
An association request or response frame is generally delivered to the
driver without a TX queue object. However, with drivers that do encryption
offload and couple the key with a transmit queue, this means that the
frames are not being encrypted.
Fix this by routing the association frames to the management TXQ.
This will allow the driver to set up the required resources before
transmitting the association frame, e.g., set up keys etc.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260706222925.febcc62f485c.Iff932880e4b98232cbf6ba405fbb90d650a85381@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211_hwsim_stop() drops any frames left in data->pending. The loop
currently checks skb_queue_empty() and then dequeues separately.
That split is racy with TX status handling, which can remove a pending
frame under the queue lock. If the last entry is removed after the empty
check, skb_dequeue() returns NULL and the stop path passes that NULL skb
to ieee80211_free_txskb().
Use skb_dequeue() as the loop condition instead. The dequeue result is the
object that stop owns and frees, and a concurrent status completion that
empties the queue simply makes the loop terminate.
Fixes: bd18de5179 ("mac80211_hwsim: drop pending frames on stop")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260706161822.921039-1-zzzccc427@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211_hwsim_free() removes each radio from hwsim_radios before calling
mac80211_hwsim_del_radio(), but leaves the matching hwsim_radios_rht entry
in place until the whole table is destroyed.
Other radio removal paths remove both the list entry and data->rht while
holding hwsim_radio_lock, before dropping the lock and deleting the radio.
Do the same here so the all-radio cleanup path follows the same object
visibility ordering.
This helper is used while all radios are being torn down, either after
callback users have already been unregistered or while module init is
unwinding, so no hwsim_radios_generation update is needed.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260706123756.343818-1-zzzccc427@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, when userspace requests station information with
link statistics using NL80211_CMD_GET_STATION with the
NL80211_ATTR_STA_DUMP_LINK_STATS flag, the kernel uses the .doit callback
(nl80211_get_station) which sends a single netlink message. For MLO
stations with multiple links, the link statistics can be large and may
exceed the maximum netlink message size, causing the operation to fail
with -EMSGSIZE.
The .dumpit callback (nl80211_dump_station) already supports
fragmentation across multiple netlink messages, making it suitable
for handling large link statistics. However, it currently iterates over
all stations on the interface, which is inefficient when userspace only
wants information about a specific station.
Add support for MAC address filtering in nl80211_dump_station to allow
userspace to request fragmented link statistics for a specific station.
When NL80211_ATTR_MAC is present in a dump request, cache the MAC address
in the dump context and use rdev_get_station() to retrieve information for
only that station, instead of iterating over all stations with
rdev_dump_station().
This allows userspace tools (like iw) to use NL80211_CMD_GET_STATION with
NLM_F_DUMP flag to retrieve complete link statistics for a specific
station across multiple netlink messages, avoiding the message size
limitation.
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260614051739.3979947-6-praneesh.p@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In MLO scenarios, stations may have multiple links, each with distinct
statistics. When userspace tools like iw or hostapd request station dumps,
attempting to pack all per-link stats into a single netlink message can
easily exceed the default 4KB buffer limit, especially when more than two
links are active. This results in -EMSGSIZE errors and incomplete data
delivery.
To address this, fragment per-link station statistics across multiple
netlink messages to ensure reliable delivery of complete MLO station
information. Extend the stateful context with a two-phase dump mechanism:
phase 0 (AGGREGATED) sends combined MLO-level statistics and phase 1
(PER_LINK) sends individual per-link statistics for each active link.
The dump loop is structured to produce exactly one netlink message per
iteration, with a common header (ifindex, wdev, mac, generation) built
once and phase-specific payload added via a switch statement. This keeps
header construction in one place and makes the EMSGSIZE bail-out uniform.
Add a new request flag attribute, NL80211_ATTR_STA_DUMP_LINK_STATS
(NLA_FLAG), for NL80211_CMD_GET_STATION dump. Userspace can set this
flag to request per-link station statistics for MLO stations.
Extract this flag during the first dump invocation by passing an attrbuf
to nl80211_prepare_wdev_dump(); use __free(kfree) to avoid scattered
manual kfree() calls. Cache the boolean in the dump context to avoid
repeated parsing on subsequent invocations.
Per-link messages carry a single NL80211_ATTR_MLO_LINKS nest with the
link ID, link-specific MAC, and per-link NL80211_ATTR_STA_INFO payload.
The link-specific validity (is_valid_ether_addr) and null pointer guard
are checked in nl80211_put_link_station_payload() before any message
construction begins.
Also fix all nla_nest_start_noflag() calls in nl80211_fill_link_station()
for nested attribute types (STA_INFO, BSS_PARAM, TID_STATS, per-tid) to
use nla_nest_start() so the NLA_F_NESTED flag is set correctly.
Propagate the actual return value from nl80211_put_sta_info_common() in
the AGGREGATED phase rather than returning skb->len. Returning skb->len
signals netlink to re-invoke the dump with the same sta_idx, causing an
infinite loop when the aggregated payload is too large to fit; returning
the real error code (-EMSGSIZE or otherwise) terminates the dump cleanly.
Backward compatibility is seamlessly preserved for non-MLO stations.
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260614051739.3979947-5-praneesh.p@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, nl80211_dump_station() relies on the netlink callback's generic
args array (cb->args[2]) to track the station index during dumps. It also
processes the entire sinfo structure and transmits it to userspace
immediately in a single pass.
This approach creates a bottleneck for MLO. When an MLD station has
multiple active links, the aggregated station information, combined
with the individual per-link statistics, can easily exceed the
maximum netlink message size limits. The current monolithic dump
iteration cannot pause and resume mid-station to fragment these large
per-link statistics across multiple netlink messages.
Introduce a stateful context structure (struct nl80211_dump_station_ctx)
allocated during the dump to track the iteration state. Store the context
pointer directly at cb->args[2], following the same pattern as
nl80211_dump_wiphy which stores its state pointer at cb->args[0].
Move the station index (sta_idx) tracking and the sinfo payload into this
context. The per-station netlink message is built inline in the loop:
common header attributes are assembled directly, then
nl80211_put_sta_info_common() adds the STA_INFO payload.
Furthermore, move the NL80211_CMD_GET_STATION command definition from
genl_small_ops to genl_ops to natively support the .done callback.
Implement nl80211_dump_station_done() to ensure the newly allocated state
context and its deeply allocated sinfo payload are safely freed when the
dump concludes or is aborted prematurely by userspace.
Note that the previous dump path used nl80211_send_station(), which
included NL80211_ATTR_IE and NL80211_ATTR_RESP_IE. These attributes are
not carried forward in this implementation. As documented, association
response IEs (assoc_resp_ies) are only relevant at station creation time
(e.g. via cfg80211_new_sta()) to notify userspace about association
details, and are not expected to be part of get_station()/dump_station()
callbacks. Aligning with this expectation, these IEs are intentionally
omitted here.
This refactoring maintains the existing netlink batching performance while
laying the stateful foundation required for per-link statistics
fragmentation in subsequent patches.
At out_err_release, cfg80211_sinfo_release_content() frees any
dynamically allocated sub-fields inside ctx->sinfo (including per-link
pointers in sinfo.links[]). Without the subsequent memset, those
pointers remain non-NULL in the embedded sinfo. When the dump concludes
or is aborted, nl80211_dump_station_done() calls
cfg80211_sinfo_release_content() a second time on the same ctx->sinfo,
which would free the already-released link memory. The
memset(&ctx->sinfo, 0, sizeof(ctx->sinfo)) zeroes all pointers so the
second release call hits kfree(NULL), which is a harmless no-op.
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260614051739.3979947-4-praneesh.p@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a helper function nl80211_put_sta_info_common() to pack the
station-level (aggregated) STA information into a netlink message.
This prepares the code for future enhancements such as supporting
fragmented link statistics in nl80211_dump_station.
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260614051739.3979947-3-praneesh.p@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove the link level statistics handling from
nl80211_send_station() and drop the unused link_stats parameter
from its signature and callers. The removed code iterated over
each MLO link and attempted to send link specific station data
through NL80211_ATTR_MLO_LINKS, but this logic was never used
because link_stats was always false.
This logic was introduced during early work on link level station
statistics with the intention of reporting information for each
link. Due to message size concerns when a station has multiple
links, the feature was disabled behind the link_stats flag and
remained unused.
The link level reporting block in nl80211_send_station() is dead
code and cannot support larger messages, so remove it. This
cleanup also prepares for proper link level statistics reporting
in nl80211_dump_station() in a later patch, where fragmentation
allows safe transmission of multi link data.
Also fix label indentation: the nla_put_failure label had an
erroneous leading space.
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260614051739.3979947-2-praneesh.p@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The p54 wireless wiki links (wireless.wiki.kernel.org) return 404; the
content moved to the Sphinx documentation site. Point them at the
current wireless.docs.kernel.org pages.
Signed-off-by: Anas Khan <anxkhn28@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20260702102325.63955-1-anxkhn28@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wlcore_alloc_hw() uses __get_free_pages() to allocate TX aggregation
and firmware log buffers used for software data staging.
These buffer can be allocated with kmalloc() as there's nothing special
about them to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_pages() with kzalloc() and free_pages() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260701-b4-drivers-wireless-v1-4-60264cdf2efe@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex debugfs functions allocate buffers for formatting debug output
text using get_zeroed_page().
These buffers can be allocated with kmalloc() as there's nothing special
about them to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260701-b4-drivers-wireless-v1-3-60264cdf2efe@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
libertas debugfs functions allocate buffers for formatting debug
output text using get_zeroed_page().
These buffers can be allocated with kmalloc() as there's nothing special
about them to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260701-b4-drivers-wireless-v1-2-60264cdf2efe@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
b43* debugfs functions allocate 16 KiB buffers for formatting debug output
text using __get_free_pages().
kzalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object and for 16 Kib
allocation kzalloc() will anyway delegate it to buddy.
Replace use of __get_free_pages() with kzalloc().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260701-b4-drivers-wireless-v1-1-60264cdf2efe@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Useful for S1G drivers due to the increased required granularity,
but may be useful for others so include it as a generic helper.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260626063014.1275235-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is needed for drivers and will be needed for mac80211/cfg80211
in the future so introduce a generic accessor to retrieve the
chandefs S1G primary channel width.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260626063014.1275235-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, an AP may receive unprotected beacons from neighbouring
BSSes, which cfg80211_rx_unprot_mlme_mgmt() forwards to userspace via
NL80211_CMD_UNPROT_BEACON regardless of interface type.
While the kernel rate-limits these events to once per 10 seconds per
wdev, in multi-BSS scenarios each AP interface maintains its own
rate-limit state, increasing the number of reported events.
In AP mode, hostapd has no handler for NL80211_CMD_UNPROT_BEACON and
logs an unhandled event message for each occurrence, leading to excessive
log noise and making it harder to identify real issues.
Since an AP does not need to act on unprotected beacons from neighbouring
BSSes, skip reporting this event when operating in AP mode.
Signed-off-by: Dhanavandhana Kannan <dhanavandhana.kannan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623103412.1578812-1-dhanavandhana.kannan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add NL80211_EXT_FEATURE_PROBE_AP to allow drivers to advertise
support for probing the associated AP from STA/P2P-client mode.
Extend nl80211_probe_peer() to accept STA/P2P-client interfaces
when the driver advertises NL80211_EXT_FEATURE_PROBE_AP; in that
case the MAC attribute must be omitted (the peer is implied by
the association).
Update cfg80211_probe_status() to accept an optional peer address
and a link_id parameter (-1 for non-MLO), and include
NL80211_ATTR_MLO_LINK_ID in the event when link_id >= 0.
Update all callers.
Signed-off-by: Priyansha Tiwari <priyansha.tiwari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611062225.2144241-3-pritiwa@qti.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rename NL80211_CMD_PROBE_CLIENT to NL80211_CMD_PROBE_PEER in the UAPI
enum and retain NL80211_CMD_PROBE_CLIENT as a compatibility alias.
Rename the .probe_client cfg80211_ops callback to .probe_peer and
update all in-tree users (wil6210, mwifiex) and mac80211 so the
tree continues to build after this change.
Signed-off-by: Priyansha Tiwari <priyansha.tiwari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260611062225.2144241-2-pritiwa@qti.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-7.2-rc2).
No conflicts.
Adjacent changes:
MAINTAINERS:
56114690ff ("MAINTAINERS: Update Marvell octeontx2 driver maintainers")
eb56577ae9 ("ehea: remove the ehea driver")
net/core/netpoll.c:
45f1458a85 ("netpoll: fix a use-after-free on shutdown path")
84c0ff1efb ("netpoll: do not warn when the best-effort pool refill fails")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth: virtio_net: disable cb when NAPI is busy-polled
- eth: lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth: mlx5e: fix use-after-free of metadata_dst on RX SC delete
- eth: enetc: check the number of BDs needed for xdp_frame
- eth: fbnic: don't cache shinfo across skb realloc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmpGTMASHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkjDMQAIWWaKs8zb+d/aTW0uNzlatQuY2w7+rU
i2+W5Bb7e2w95OP3dM2abNu4oGb/O69PsLzTAg8/TYTICcBe6j8i3QThXNtw0vNi
USZqvZdeCUB8r/ICvBki7FoV2bxDZh2TAWsHHxbPEup7y/SbWg9Wk7kAQj+uxjFa
dV5DoVBrS376xt+VO/D89BKCoqneJRetHJoO11cKNPbd+btXcbConXBTYYDfxzaO
fdwqbP7nNN6X6ADXcjf0oSHkj/bdiw+CdaU2Z1lSa0cuDolO80aIXW5d1AVnrxC1
C6hOz5rvQS0l0+ionRkB6S77B6PNPp12cYo3L9HaoQuE+oQc3QvotwxvJpzRxHYf
wTBQ11Ab0mke11OVXjjGZREA9c+BZ9j8Tto539H11s9tUegRU/V9AFvErTdfx/Ym
Hr82C+wC3Bv6b7iYjAF7BJAtV9GJ0VSwaw3luSFOh4S6XyBzqn482XfnKF2m/Js3
7l5TQYLYtUjYJ0NhuXDkwWBKkP8HimIWZs7de41GZv6DMa/aaoFlzr4MRrD+Uuc0
CW6G5UNOOGVNNuNMPKIMw3w9diMVoc72yFleNGwlOBsrOyncW2JI1eIyWBLx3E9G
l9jabZPD2qzsi/iXCzPM4rn2hp3Sb5qOvuBg8qRsiDqz5t1b1mRhvPVcu36k38Mu
gAwmDBbogPcC
=E5mR
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and batman-adv.
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth:
- virtio_net: disable cb when NAPI is busy-polled
- lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth:
- mlx5e: fix use-after-free of metadata_dst on RX SC delete
- enetc: check the number of BDs needed for xdp_frame
- fbnic: don't cache shinfo across skb realloc"
* tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net/mlx5: HWS, fix matcher leak on resize target setup failure
net/sched: hhf: clear heavy-hitter state on reset
net/sched: dualpi2: clear stale classification on filter miss
net/sched: act_bpf: use rcu_dereference_bh() to read the filter
selftests: drv-net: tso: don't touch dangerous feature bits
cxgb4: Fix decode strings dump for T6 adapters
virtio_net: disable cb when NAPI is busy-polled
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
selftests: net: bump default cmd() timeout to 20 seconds
bridge: stp: Fix a potential use-after-free when deleting a bridge
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
net: gianfar: dispose irq mappings on probe failure and device removal
net: lan743x: Initialize eth_syslock spinlock before use
net: libwx: fix VMDQ mask for 1-queue mode
net: airoha: fix max receive size configuration
fsl/fman: Free init resources on KeyGen failure in fman_init()
netfilter: nftables: restrict checkum update offset
netfilter: nftables: restrict linklayer and network header writes
netfilter: nfnetlink_queue: restrict writes to network header
netfilter: nft_fib: reject fib expression on the netdev egress hook
...
* Add MFD mailing list to MAINTAINERS
-----BEGIN PGP SIGNATURE-----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=9mYD
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
- Add MFD mailing list to MAINTAINERS
* tag 'mfd-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
MAINTAINERS: Add a mailing list entry to MFD
Kiran Kumar says:
====================
octeontx2-af: NPC parser and RSS improvements
This series extends the Marvell OcteonTX2 admin-function driver with two
improvements to the NPC (Network Parser CAM) block. The NPC parses packets
received by or transmitted from the NIX, and its matching CAM (MCAM)
selects which VFs, queues, or output ports handle each packet.
Patch 1 reserves a new range of PKINDs (46-53) to support configurable
L2 skip-size parsing. Packets arriving with variable length L2 headers
or a CPT (Cryptographic Accelerator Unit) pre-header can be steered
to one of four skip-size PKINDs so the NPC advances past the right number
of bytes before starting protocol classification. The mbox interface is
extended with a skip_size field so PF/VF drivers can program the desired
L2 offset at run time without rebuilding firmware.
Patch 2 adds a NIX_FLOW_KEY_TYPE_ROCEV2 flow-key type so the RSS engine
can distribute RoCEv2 traffic across receive queues using the destination
Queue Pair (QP) field. Without this, all RoCEv2 flows hash the same
way and land on a single queue.
Both changes target the admin-function driver to improve overall hardware
parsing infrastructure.
====================
Link: https://patch.msgid.link/20260630062145.2533816-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add NIX_FLOW_KEY_TYPE_ROCEV2 flow key type to support RSS hashing on
the RoCEv2 destination Queue Pair (QP) field, allowing RoCEv2 traffic
to be distributed across receive queues.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Link: https://patch.msgid.link/20260630062145.2533816-3-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
