The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC.
Cc: stable@vger.kernel.org
Fixes: 24aeb56f2d ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Debarghya Kundu <debarghyak@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni says:
====================
net: gro: fix outer network offset
The GRO stage has still problems in some edge scenarios when dealing
with encapsulated traffic: the first patch address an issue there
leading to bad checksums.
The second patch introduces a test case covering the relevant scenario:
S/W segmentation after GRO for encapsulated traffic.
====================
Link: https://patch.msgid.link/cover.1770032084.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We had a few patches in this area and no explicit coverage so far.
The test case covers the scenario addressed by the previous fix;
reusing the existing udpgro_fwd.sh script to leverage part of the
of the virtual network setup, even if such script is possibly not
a perfect fit.
Note that the mentioned script already contains several shellcheck
violation; this patch does not fix the existing code, just avoids
adding more issues in the new one.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/768ca132af81e83856e34d3105b86c37e566a7ad.1770032084.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The udp GRO complete stage assumes that all the packets inserted the RX
have the `encapsulation` flag zeroed. Such assumption is not true, as a
few H/W NICs can set such flag when H/W offloading the checksum for
an UDP encapsulated traffic, the tun driver can inject GSO packets with
UDP encapsulation and the problematic layout can also be created via
a veth based setup.
Due to the above, in the problematic scenarios, udp4_gro_complete() uses
the wrong network offset (inner instead of outer) to compute the outer
UDP header pseudo checksum, leading to csum validation errors later on
in packet processing.
Address the issue always clearing the encapsulation flag at GRO completion
time. Such flag will be set again as needed for encapsulated packets by
udp_gro_complete().
Fixes: 5ef31ea5d0 ("net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/562638dbebb3b15424220e26a180274b387e2a88.1770032084.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 1d10f8a1f4 ("net-procfs: show net devices bound packet types")
Fixes: c353e8983e ("net: introduce per netns packet chains")
Reported-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Reported-by: Dong Chenchen <dongchenchen2@huawei.com>
Closes: https://lore.kernel.org/netdev/CANn89iKRRKPnWjJmb-_3a=sq+9h6DvTQM4DBZHT5ZRGPMzQaiA@mail.gmail.com/T/#m7b80b9fc9b9267f90e0b7aad557595f686f9c50d
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Tested-by: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Link: https://patch.msgid.link/20260202205217.2881198-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devm_gpiod_get_optional() function may return an ERR_PTR in case of
genuine GPIO acquisition errors, not just NULL which indicates the
legitimate absence of an optional GPIO.
Add an IS_ERR() check after the call in adin1110_check_spi(). On error,
return the error code to ensure proper failure handling rather than
proceeding with invalid pointers.
Fixes: 36934cac7a ("net: ethernet: adi: adin1110: add reset GPIO")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260202040228.4129097-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver never programs the MAC frame size and jabber registers,
causing the hardware to reject frames larger than the default 1518
bytes even when larger DMA buffers are allocated.
Program MAC_MAXIMUM_FRAME_SIZE, MAC_TRANSMIT_JABBER_SIZE, and
MAC_RECEIVE_JABBER_SIZE based on the configured MTU. Also fix the
maximum buffer size from 4096 to 4095, since the descriptor buffer
size field is only 12 bits. Account for double VLAN tags in frame
size calculations.
Fixes: bfec6d7f20 ("net: spacemit: Add K1 Ethernet MAC")
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
Link: https://patch.msgid.link/20260130102301.477514-1-tmshlvck@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-30 (ice, i40e)
This series contains updates to ice and i40e drivers.
Grzegorz and Jake resolve issues around timing for E825 that can cause Tx
timestamps to be missed/interrupts not generated on ice.
Aaron Ma defers restart of PTP work until after after VSIs are rebuilt
to prevent NULL pointer dereference for ice.
Mohammad Heib removes calls to udp_tunnel_get_rx_info() in ice and i40e
which violates locking expectations and is unneeded.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: drop udp_tunnel_get_rx_info() call from i40e_open()
ice: drop udp_tunnel_get_rx_info() call from ndo_open()
ice: Fix PTP NULL pointer dereference during VSI rebuild
ice: PTP: fix missing timestamps on E825 hardware
ice: fix missing TX timestamps interrupts on E825 devices
====================
Link: https://patch.msgid.link/20260130185401.1091523-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is not recommended to access the 32‑bit registers of this hardware IP
using lower‑width accessors (i.e. 16‑bit), and the only exception to
this rule was introduced in the initial ENETC v1 driver for the PMAR1
register, which holds the lower 16 bits of the primary MAC address of
an SI. Meanwhile, this exception has been replicated in the v4 driver
code as well.
Since LS1028 (the only SoC with ENETC v1) is not affected by this issue,
the current patch converts the 16‑bit reads from PMAR1 starting with
ENETC v4.
Fixes: 99100d0d99 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-5-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For ENETC v4, which is integrated into more complex SoCs (compared to v1),
16‑bit register writes are blocked in the SoC interconnect on some chips.
To be fair, it is not recommended to access 32‑bit registers of this IP
using lower‑width accessors (i.e. 16‑bit), and the only exception to
this rule was introduced by me in the initial ENETC v1 driver for the
PMAR1 register, which holds the lower 16 bits of the primary MAC address
of an SI. Meanwhile, this exception has been replicated for v4 as well.
Since LS1028 (the only SoC with ENETC v1) is not affected by this issue,
the current patch fixes the 16‑bit writes to PMAR1 starting with ENETC
v4.
Fixes: 99100d0d99 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-4-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For ENETC v4 these settings are controlled by the global ENETC
command cache attribute registers (EnCAR), from the IERB register
block.
The hardcoded CDBR cacheability settings were inherited from LS1028A,
and should be removed from the ENETC v4 driver as they conflict
with the global IERB settings.
Fixes: e3f4a0a8dd ("net: enetc: add command BD ring support for i.MX95 ENETC")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-3-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For ENETC v4 these settings are controlled by the global ENETC
message and buffer cache attribute registers (EnBCAR and EnMCAR),
from the IERB register block.
The hardcoded cacheability settings were inherited from LS1028A,
and should be removed from the ENETC v4 driver as they conflict
with the global IERB settings.
Fixes: 99100d0d99 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-2-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rx->skey field contains a struct tipc_aead_key with GCM-AES
encryption keys used for TIPC cluster communication. Using plain
kfree() leaves this sensitive key material in freed memory pages
where it could potentially be recovered.
Switch to kfree_sensitive() to ensure the key material is zeroed
before the memory is freed.
Fixes: 1ef6f7c939 ("tipc: add automatic session key exchange")
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260131180114.2121438-1-hodgesd@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marek reported that suspending stm32 causes the following errors when
the interface is administratively down:
$ echo devices > /sys/power/pm_test
$ echo mem > /sys/power/state
...
ck_ker_eth2stp already disabled
...
ck_ker_eth2stp already unprepared
...
On suspend, stm32 starts the eth2stp clock in its suspend method, and
stops it in the resume method. This is because the blamed commit omits
the call to the platform glue ->suspend() method, but does make the
call to the platform glue ->resume() method.
This problem affects all other converted drivers as well - e.g. looking
at the PCIe drivers, pci_save_state() will not be called, but
pci_restore_state() will be. Similar issues affect all other drivers.
Fix this by always calling the ->suspend() method, even when the network
interface is down. This fixes all the conversions to the platform glue
->suspend() and ->resume() methods.
Link: https://lore.kernel.org/r/20260114081809.12758-1-marex@nabladev.com
Fixes: 07bbbfe7ad ("net: stmmac: add suspend()/resume() platform ops")
Reported-by: Marek Vasut <marex@nabladev.com>
Tested-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vlujh-00000007Hkw-2p6r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initializing input_xfrm to RXH_XFRM_NO_CHANGE in RSS contexts is
problematic. I think I did this to make it clear that the context
does not have its own settings applied. But unlike ETH_RSS_HASH_NO_CHANGE
which is zero, RXH_XFRM_NO_CHANGE is 0xff. We need to be careful
when reading the value back, and remember to treat 0xff as 0.
Remove the initialization and switch to storing 0. This lets us
also remove the workaround in ethnl_rss_set(). Get side does not
need any adjustments and context get no longer reports:
RSS input transformation:
symmetric-xor: on
symmetric-or-xor: on
Unknown bits in RSS input transformation: 0xfc
for NICs which don't support input_xfrm.
Remove the init of hfunc to ETH_RSS_HASH_NO_CHANGE while at it.
As already mentioned this is a noop since ETH_RSS_HASH_NO_CHANGE
is 0 and struct is zalloc'd. But as this fix exemplifies storing
NO_CHANGE as state is fragile.
This issue is implicitly caught by running our selftests because
YNL in selftests errors out on unknown bits.
Fixes: d3e2c7bab1 ("ethtool: rss: support setting input-xfrm via Netlink")
Link: https://patch.msgid.link/20260130190311.811129-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After linkwatch_do_dev() calls __dev_put() to release the linkwatch
reference, the device refcount may drop to 1. At this point,
netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an
empty list and returns without blocking), wait for the refcount to
become 1 via netdev_wait_allrefs_any(), and then free the device
via kobject_put().
This creates a use-after-free when __linkwatch_run_queue() tries to
call netdev_unlock_ops() on the already-freed device.
Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in
netdev_run_todo() before kobject_put() would not work, because
netdev_lock_ops() is conditional - it only locks when
netdev_need_ops_lock() returns true. If the device doesn't require
ops_lock, linkwatch won't hold any lock, and netdev_run_todo()
acquiring the lock won't provide synchronization.
Fix this by moving __dev_put() from linkwatch_do_dev() to its
callers. The device reference logically pairs with de-listing the
device, so it's reasonable for the caller that did the de-listing
to release it. This allows placing __dev_put() after all device
accesses are complete, preventing UAF.
The bug can be reproduced by adding mdelay(2000) after
linkwatch_do_dev() in __linkwatch_run_queue(), then running:
ip tuntap add mode tun name tun_test
ip link set tun_test up
ip link set tun_test carrier off
ip link set tun_test carrier on
sleep 0.5
ip tuntap del mode tun name tun_test
KASAN report:
==================================================================
BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123
CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events_unbound linkwatch_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x156/0x4c9 mm/kasan/report.c:482
kasan_report+0xdf/0x1a0 mm/kasan/report.c:595
netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
netdev_unlock_ops include/net/netdev_lock.h:47 [inline]
__linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245
linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304
process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x5da/0xe40 kernel/workqueue.c:3421
kthread+0x3b3/0x730 kernel/kthread.c:463
ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
==================================================================
Fixes: 04efcee6ef ("net: hold instance lock during NETDEV_CHANGE")
Reported-by: syzbot+1ec2f6a450f0b54af8c8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6824d064.a70a0220.3e9d8.001a.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260201135915.393451-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal reports that BPF redirect increments dev->stats.tx_errors
on failure. This is not correct, most modern drivers completely
ignore dev->stats so these drops will be invisible to the user.
Core code should use the dedicated core stats which are folded
into device stats in dev_get_stats().
Note that we're switching from tx_errors to tx_dropped.
Core only has tx_dropped, hence presumably users already expect
that counter to increment for "stack" Tx issues.
Reported-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/c5df3b60-246a-4030-9c9a-0a35cd1ca924@nvidia.com
Fixes: b4ab314149 ("bpf: Add redirect_neigh helper as redirect drop-in")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260130033827.698841-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtl8152 can trigger device reset during reset which
potentially can result in a deadlock:
**** DPM device timeout after 10 seconds; 15 seconds until panic ****
Call Trace:
<TASK>
schedule+0x483/0x1370
schedule_preempt_disabled+0x15/0x30
__mutex_lock_common+0x1fd/0x470
__rtl8152_set_mac_address+0x80/0x1f0
dev_set_mac_address+0x7f/0x150
rtl8152_post_reset+0x72/0x150
usb_reset_device+0x1d0/0x220
rtl8152_resume+0x99/0xc0
usb_resume_interface+0x3e/0xc0
usb_resume_both+0x104/0x150
usb_resume+0x22/0x110
The problem is that rtl8152 resume calls reset under
tp->control mutex while reset basically re-enters rtl8152
and attempts to acquire the same tp->control lock once
again.
Reset INACCESSIBLE device outside of tp->control mutex
scope to avoid recursive mutex_lock() deadlock.
Fixes: 4933b066fe ("r8152: If inaccessible at resume time, issue a reset")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://patch.msgid.link/20260129031106.3805887-1-senozhatsky@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
valis provided a nice repro to crash the kernel:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20
ping -c1 -I p1 1.2.3.4
He also gave a very detailed analysis:
<quote valis>
The issue is triggered when a new macvlan link is created with
MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or
MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan
port and register_netdevice() called from macvlan_common_newlink()
fails (e.g. because of the invalid link name).
In this case macvlan_hash_add_source is called from
macvlan_change_sources() / macvlan_common_newlink():
This adds a reference to vlan to the port's vlan_source_hash using
macvlan_source_entry.
vlan is a pointer to the priv data of the link that is being created.
When register_netdevice() fails, the error is returned from
macvlan_newlink() to rtnl_newlink_create():
if (ops->newlink)
err = ops->newlink(dev, ¶ms, extack);
else
err = register_netdevice(dev);
if (err < 0) {
free_netdev(dev);
goto out;
}
and free_netdev() is called, causing a kvfree() on the struct
net_device that is still referenced in the source entry attached to
the lower device's macvlan port.
Now all packets sent on the macvlan port with a matching source mac
address will trigger a use-after-free in macvlan_forward_source().
</quote valis>
With all that, my fix is to make sure we call macvlan_flush_sources()
regardless of @create value whenever "goto destroy_macvlan_port;"
path is taken.
Many thanks to valis for following up on this issue.
Fixes: aa5fd0fb77 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: valis <sec@valis.email>
Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com
Closes: https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u
Cc: Boudewijn van der Heide <boudewijn@delta-utec.com>
Link: https://patch.msgid.link/20260129204359.632556-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit fd580c9830 ("net: sfp: augment SFP parsing with
phy_interface_t bitmap") did not add augumentation for the interface
bitmap in the quirk for Ubiquiti U-Fiber Instant.
The subsequent commit f81fa96d8a ("net: phylink: use
phy_interface_t bitmaps for optical modules") then changed phylink code
for selection of SFP interface: instead of using link mode bitmap, the
interface bitmap is used, and the fastest interface mode supported by
both SFP module and MAC is chosen.
Since the interface bitmap contains also modes faster than 1000base-x,
this caused a regression wherein this module stopped working
out-of-the-box.
Fix this.
Fixes: fd580c9830 ("net: sfp: augment SFP parsing with phy_interface_t bitmap")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260129082227.17443-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i40e driver calls udp_tunnel_get_rx_info() during i40e_open().
This is redundant because UDP tunnel RX offload state is preserved
across device down/up cycles. The udp_tunnel core handles
synchronization automatically when required.
Furthermore, recent changes in the udp_tunnel infrastructure require
querying RX info while holding the udp_tunnel lock. Calling it
directly from the ndo_open path violates this requirement,
triggering the following lockdep warning:
Call Trace:
<TASK>
? __udp_tunnel_nic_assert_locked+0x39/0x40 [udp_tunnel]
i40e_open+0x135/0x14f [i40e]
__dev_open+0x121/0x2e0
__dev_change_flags+0x227/0x270
dev_change_flags+0x3d/0xb0
devinet_ioctl+0x56f/0x860
sock_do_ioctl+0x7b/0x130
__x64_sys_ioctl+0x91/0xd0
do_syscall_64+0x90/0x170
...
</TASK>
Remove the redundant and unsafe call to udp_tunnel_get_rx_info() from
i40e_open() resolve the locking violation.
Fixes: 1ead750109 ("udp_tunnel: remove rtnl_lock dependency")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice driver calls udp_tunnel_get_rx_info() during ice_open_internal().
This is redundant because UDP tunnel RX offload state is preserved
across device down/up cycles. The udp_tunnel core handles
synchronization automatically when required.
Furthermore, recent changes in the udp_tunnel infrastructure require
querying RX info while holding the udp_tunnel lock. Calling it
directly from the ndo_open path violates this requirement,
triggering the following lockdep warning:
Call Trace:
<TASK>
ice_open_internal+0x253/0x350 [ice]
__udp_tunnel_nic_assert_locked+0x86/0xb0 [udp_tunnel]
__dev_open+0x2f5/0x880
__dev_change_flags+0x44c/0x660
netif_change_flags+0x80/0x160
devinet_ioctl+0xd21/0x15f0
inet_ioctl+0x311/0x350
sock_ioctl+0x114/0x220
__x64_sys_ioctl+0x131/0x1a0
...
</TASK>
Remove the redundant and unsafe call to udp_tunnel_get_rx_info() from
ice_open_internal() to resolve the locking violation
Fixes: 1ead750109 ("udp_tunnel: remove rtnl_lock dependency")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E825 hardware currently has each PF handle the PFINT_TSYN_TX cause of
the miscellaneous OICR interrupt vector. The actual interrupt cause
underlying this is shared by all ports on the same quad:
┌─────────────────────────────────┐
│ │
│ ┌────┐ ┌────┐ ┌────┐ ┌────┐ │
│ │PF 0│ │PF 1│ │PF 2│ │PF 3│ │
│ └────┘ └────┘ └────┘ └────┘ │
│ │
└────────────────▲────────────────┘
│
│
┌────────────────┼────────────────┐
│ PHY QUAD │
└───▲────────▲────────▲────────▲──┘
│ │ │ │
┌───┼──┐ ┌───┴──┐ ┌───┼──┐ ┌───┼──┐
│Port 0│ │Port 1│ │Port 2│ │Port 3│
└──────┘ └──────┘ └──────┘ └──────┘
If multiple PFs issue Tx timestamp requests near simultaneously, it is
possible that the correct PF will not be interrupted and will miss its
timestamp. Understanding why is somewhat complex.
Consider the following sequence of events:
CPU 0:
Send Tx packet on PF 0
...
PF 0 enqueues packet with Tx request CPU 1, PF1:
... Send Tx packet on PF1
... PF 1 enqueues packet with Tx request
HW:
PHY Port 0 sends packet
PHY raises Tx timestamp event interrupt
MAC raises each PF interrupt
CPU 0, PF0: CPU 1, PF1:
ice_misc_intr() checks for Tx timestamps ice_misc_intr() checks for Tx timestamp
Sees packet ready bit set Sees nothing available
... Exits
...
...
HW:
PHY port 1 sends packet
PHY interrupt ignored because not all packet timestamps read yet.
...
Read timestamp, report to stack
Because the interrupt event is shared for all ports on the same quad, the
PHY will not raise a new interrupt for any PF until all timestamps are
read.
In the example above, the second timestamp comes in for port 1 before the
timestamp from port 0 is read. At this point, there is no longer an
interrupt thread running that will read the timestamps, because each PF has
checked and found that there was no work to do. Applications such as ptp4l
will timeout after waiting a few milliseconds. Eventually, the watchdog
service task will re-check for all quads and notice that there are
outstanding timestamps, and issue a software interrupt to recover. However,
by this point it is far too late, and applications have already failed.
All of this occurs because of the underlying hardware behavior. The PHY
cannot raise a new interrupt signal until all outstanding timestamps have
been read.
As a first step to fix this, switch the E825C hardware to the
ICE_PTP_TX_INTERRUPT_ALL mode. In this mode, only the clock owner PF will
respond to the PFINT_TSYN_TX cause. Other PFs disable this cause and will
not wake. In this mode, the clock owner will iterate over all ports and
handle timestamps for each connected port.
This matches the E822 behavior, and is a necessary but insufficient step to
resolve the missing timestamps.
Even with use of the ICE_PTP_TX_INTERRUPT_ALL mode, we still sometimes miss
a timestamp event. The ice_ptp_tx_tstamp_owner() does re-check the ready
bitmap, but does so before re-enabling the OICR interrupt vector. It also
only checks the ready bitmap, but not the software Tx timestamp tracker.
To avoid risk of losing a timestamp, refactor the logic to check both the
software Tx timestamp tracker bitmap *and* the hardware ready bitmap.
Additionally, do this outside of ice_ptp_process_ts() after we have already
re-enabled the OICR interrupt.
Remove the checks from the ice_ptp_tx_tstamp(), ice_ptp_tx_tstamp_owner(),
and the ice_ptp_process_ts() functions. This results in ice_ptp_tx_tstamp()
being nothing more than a wrapper around ice_ptp_process_tx_tstamp() so we
can remove it.
Add the ice_ptp_tx_tstamps_pending() function which returns a boolean
indicating if there are any pending Tx timestamps. First, check the
software timestamp tracker bitmap. In ICE_PTP_TX_INTERRUPT_ALL mode, check
*all* ports software trackers. If a tracker has outstanding timestamp
requests, return true. Additionally, check the PHY ready bitmap to confirm
if the PHY indicates any outstanding timestamps.
In the ice_misc_thread_fn(), call ice_ptp_tx_tstamps_pending() just before
returning from the IRQ thread handler. If it returns true, write to
PFINT_OICR to trigger a PFINT_OICR_TSYN_TX_M software interrupt. This will
force the handler to interrupt again and complete the work even if the PHY
hardware did not interrupt for any reason.
This results in the following new flow for handling Tx timestamps:
1) send Tx packet
2) PHY captures timestamp
3) PHY triggers MAC interrupt
4) clock owner executes ice_misc_intr() with PFINT_OICR_TSYN_TX flag set
5) ice_ptp_ts_irq() returns IRQ_WAKE_THREAD
7) The interrupt thread wakes up and kernel calls ice_misc_intr_thread_fn()
8) ice_ptp_process_ts() is called to handle any outstanding timestamps
9) ice_irq_dynamic_ena() is called to re-enable the OICR hardware interrupt
cause
10) ice_ptp_tx_tstamps_pending() is called to check if we missed any more
outstanding timestamps, checking both software and hardware indicators.
With this change, it should no longer be possible for new timestamps to
come in such a way that we lose an interrupt. If a timestamp comes in
before the ice_ptp_tx_tstamps_pending() call, it will be noticed by at
least one of the software bitmap check or the hardware bitmap check. If the
timestamp comes in *after* this check, it should cause a timestamp
interrupt as we have already read all timestamps from the PHY and the OICR
vector has been re-enabled.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Vitaly Grinberg <vgrinber@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Modify PTP (Precision Time Protocol) configuration on link down flow.
Previously, PHY_REG_TX_OFFSET_READY register was cleared in such case.
This register is used to determine if the timestamp is valid or not on
the hardware side.
However, there is a possibility that there is still the packet in the
HW queue which originally was supposed to be timestamped but the link
is already down and given register is cleared.
This potentially might lead to the situation in which that 'delayed'
packet's timestamp is treated as invalid one when the link is up
again.
This in turn leads to the situation in which the driver is not able to
effectively clean timestamp memory and interrupt configuration.
From the hardware perspective, that 'old' interrupt was not handled
properly and even if new timestamp packets are processed, no new
interrupts is generated. As a result, providing timestamps to the user
applications (like ptp4l) is not possible.
The solution for this problem is implemented at the driver level rather
than the firmware, and maintains the tx_ready bit high, even during
link down events. This avoids entering a potential inconsistent state
between the driver and the timestamp hardware.
Testing hints:
- run PTP traffic at higher rate (like 16 PTP messages per second)
- observe ptp4l behaviour at the client side in the following
conditions:
a) trigger link toggle events. It needs to be physiscal
link down/up events
b) link speed change
In all above cases, PTP processing at ptp4l application should resume
always. In failure case, the following permanent error message in ptp4l
log was observed:
controller-0 ptp4l: err [6175.116] ptp4l-legacy timed out while polling
for tx timestamp
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The IRQ handler extracts if_id from the upper 16 bits of the hardware
status register and uses it to index into ethsw->ports[] without
validation. Since if_id can be any 16-bit value (0-65535) but the ports
array is only allocated with sw_attr.num_ifs elements, this can lead to
an out-of-bounds read potentially.
Add a bounds check before accessing the array, consistent with the
existing validation in dpaa2_switch_rx().
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 24ab724f8a ("dpaa2-switch: use the port index in the IRQ handler")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881D420AB43FF1A227B84AFAF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zilin Guan says:
====================
net: liquidio: Fix memory leaks in setup_nic_devices()
This series fixes memory leaks in the initialization paths of the
NIC devices.
Patch 1 moves the initialization of oct->props[i].netdev before queue
setup calls. This ensures that if queue setup fails, the cleanup function
can find and free the allocated netdev. It also initializes lio->oct_dev
early to prevent a crash in the cleanup path.
Patch 2 fixes an off-by-one error in the PF cleanup loop. It ensures
the current device index is cleaned up and correctly handles the
post-loop devlink_alloc failure case.
Patch 3 fixes the same off-by-one error in the VF cleanup loop.
====================
Link: https://patch.msgid.link/20260128154440.278369-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Compile tested only. Issue found using code review.
Fixes: 846b46873e ("liquidio CN23XX: VF offload features")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-4-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review.
Fixes: f21fb3ed36 ("Add support of Cavium Liquidio ethernet adapters")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-3-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: c33c997346 ("liquidio: enhanced ethtool --set-channels feature")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-2-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver allocates arrays for ports, FDBs, and filter blocks using
kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the
device reports zero interfaces (either due to hardware configuration
or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)
instead of NULL.
Later in dpaa2_switch_probe(), the NAPI initialization unconditionally
accesses ethsw->ports[0]->netdev, which attempts to dereference
ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.
Add a check to ensure num_ifs is greater than zero after retrieving
device attributes. This prevents the zero-sized allocations and
subsequent invalid pointer dereference.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 0b1b713704 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/SYBPR01MB7881BEABA8DA896947962470AF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: fix potential crash in net/sched/cls_u32.c
GangMin Kim provided a report and a repro fooling u32_classify().
Add skb_header_pointer_careful() variant of skb_header_pointer()
and use it in net/sched/cls_u32.c.
Later we can also use it in net/sched/act_pedit.c
====================
Link: https://patch.msgid.link/20260128141539.3404400-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This variant of skb_header_pointer() should be used in contexts
where @offset argument is user-controlled and could be negative.
Negative offsets are supported, as long as the zone starts
between skb->head and skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128141539.3404400-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no known regressions currently under investigation.
Current release - fix to a fix:
- can: gs_usb_receive_bulk_callback(): fix error message
Current release - regressions:
- eth: gve: fix probe failure if clock read fails
Previous releases - regressions:
- ipv6: use the right ifindex when replying to icmpv6 from localhost
- mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()
- bluetooth: fix null-ptr-deref in hci_uart_write_work
- eth: sfc: fix deadlock in RSS config read
- eth: ice: ifix NULL pointer dereference in ice_vsi_set_napi_queues
- eth: mlx5: fix memory leak in esw_acl_ingress_lgcy_setup()
Previous releases - always broken:
- core: fix segmentation of forwarding fraglist GRO
- wifi: mac80211: correctly decode TTLM with default link map
- mptcp: avoid dup SUB_CLOSED events after disconnect
- nfc: fix memleak in nfc_llcp_send_ui_frame().
- eth: bonding: fix use-after-free due to enslave fail
- eth: mlx5e:
- TC, delete flows only for existing peers
- fix inverted cap check in tx flow table root disconnect
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=m4lK
-----END PGP SIGNATURE-----
Merge tag 'net-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, CAN and wireless.
There are no known regressions currently under investigation.
Current release - fix to a fix:
- can: gs_usb_receive_bulk_callback(): fix error message
Current release - regressions:
- eth: gve: fix probe failure if clock read fails
Previous releases - regressions:
- ipv6: use the right ifindex when replying to icmpv6 from localhost
- mptcp: fix race in mptcp_pm_nl_flush_addrs_doit()
- bluetooth: fix null-ptr-deref in hci_uart_write_work
- eth:
- sfc: fix deadlock in RSS config read
- ice: ifix NULL pointer dereference in ice_vsi_set_napi_queues
- mlx5: fix memory leak in esw_acl_ingress_lgcy_setup()
Previous releases - always broken:
- core: fix segmentation of forwarding fraglist GRO
- wifi: mac80211: correctly decode TTLM with default link map
- mptcp: avoid dup SUB_CLOSED events after disconnect
- nfc: fix memleak in nfc_llcp_send_ui_frame().
- eth:
- bonding: fix use-after-free due to enslave fail
- mlx5e:
- TC, delete flows only for existing peers
- fix inverted cap check in tx flow table root disconnect"
* tag 'net-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
net: fix segmentation of forwarding fraglist GRO
wifi: mac80211: correctly decode TTLM with default link map
selftests: mptcp: join: fix local endp not being tracked
selftests: mptcp: check subflow errors in close events
mptcp: only reset subflow errors when propagated
selftests: mptcp: check no dup close events after error
mptcp: avoid dup SUB_CLOSED events after disconnect
net/mlx5e: Skip ESN replay window setup for IPsec crypto offload
net/mlx5: Fix vhca_id access call trace use before alloc
net/mlx5: fs, Fix inverted cap check in tx flow table root disconnect
net: phy: micrel: fix clk warning when removing the driver
net/mlx5e: don't assume psp tx skbs are ipv6 csum handling
net: bridge: fix static key check
nfc: nci: Fix race between rfkill and nci_unregister_device().
gve: fix probe failure if clock read fails
net/mlx5e: Account for netdev stats in ndo_get_stats64
net/mlx5e: TC, delete flows only for existing peers
net/mlx5: Fix Unbinding uplink-netdev in switchdev mode
ice: stop counting UDP csum mismatch as rx_errors
ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues
...
-----BEGIN PGP SIGNATURE-----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=2Wjs
-----END PGP SIGNATURE-----
Merge tag 'for-6.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix leaked folio refcount on s390x when using hw zlib compression
acceleration
- remove own threshold from ->writepages() which could collide with
cgroup limits and lead to a deadlock when metadadata are not written
because the amount is under the internal limit
* tag 'for-6.19-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zlib: fix the folio leak on S390 hardware acceleration
btrfs: do not strictly require dirty metadata threshold for metadata writepages
This patch enhances GSO segment handling by properly checking
the SKB_GSO_DODGY flag for frag_list GSO packets, addressing
low throughput issues observed when a station accesses IPv4
servers via hotspots with an IPv6-only upstream interface.
Specifically, it fixes a bug in GSO segmentation when forwarding
GRO packets containing a frag_list. The function skb_segment_list
cannot correctly process GRO skbs that have been converted by XLAT,
since XLAT only translates the header of the head skb. Consequently,
skbs in the frag_list may remain untranslated, resulting in protocol
inconsistencies and reduced throughput.
To address this, the patch explicitly sets the SKB_GSO_DODGY flag
for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers
(bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO
packets as potentially modified after protocol translation. As a
result, GSO segmentation will avoid using skb_segment_list and
instead falls back to skb_segment for packets with the SKB_GSO_DODGY
flag. This ensures that only safe and fully translated frag_list
packets are processed by skb_segment_list, resolving protocol
inconsistencies and improving throughput when forwarding GRO packets
converted by XLAT.
Signed-off-by: Jibin Zhang <jibin.zhang@mediatek.com>
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260126152114.1211-1-jibin.zhang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
result in a one byte out-of-bounds read.
-----BEGIN PGP SIGNATURE-----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=qI59
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just one fix, for a parsing error in mac80211 that might
result in a one byte out-of-bounds read.
* tag 'wireless-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: correctly decode TTLM with default link map
====================
Link: https://patch.msgid.link/20260129110403.178036-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
TID-To-Link Mapping (TTLM) elements do not contain any link mapping
presence indicator if a default mapping is used and parsing needs to be
skipped.
Note that access points should not explicitly report an advertised TTLM
with a default mapping as that is the implied mapping if the element is
not included, this is even the case when switching back to the default
mapping. However, mac80211 would incorrectly parse the frame and would
also read one byte beyond the end of the element.
Reported-by: Ruikai Peng <ruikai@pwno.io>
Closes: https://lore.kernel.org/linux-wireless/CAFD3drMqc9YWvTCSHLyP89AOpBZsHdZ+pak6zVftYoZcUyF7gw@mail.gmail.com
Fixes: 702e80470a ("wifi: mac80211: support handling of advertised TID-to-link mapping")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20260129113349.d6b96f12c732.I69212a50f0f70db185edd3abefb6f04d3cb3e5ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Matthieu Baerts says:
====================
mptcp: avoid dup NL events and propagate error
Here are two fixes affecting the MPTCP Netlink events with their tests:
- Patches 1 & 2: a subflow closed NL event was visible multiple times in
some specific conditions. A fix for v5.12.
- Patches 3 & 4: subflow closed NL events never contained the error
code, even when expected. A fix for v5.11.
Plus an extra fix:
- Patch 5: fix a false positive with the "signal addresses race test"
subtest when validating the MPTCP Join selftest on a v5.15.y stable
kernel.
====================
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-0-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running this mptcp_join.sh selftest on older kernel versions not
supporting local endpoints tracking, this test fails because 3 MP_JOIN
ACKs have been received, while only 2 were expected.
It is not clear why only 2 MP_JOIN ACKs were expected on old kernel
versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on
the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is
expected in the selftests included in this kernel version, see commit
f4480eaad489 ("selftests: mptcp: add missing join check").
Switch the expected MP_JOIN ACKs to 3. While at it, move this
chk_join_nr helper out of the special condition for older kernel
versions as it is now the same as with more recent ones. Also, invert
the condition to be more logical: what's expected on newer kernel
versions having such helper first.
Fixes: d4c81bbb86 ("selftests: mptcp: join: support local endpoint being tracked or not")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: subflow closed events should contain
an error field when a subflow got closed with an error, e.g. reset or
timeout.
For this test, the chk_evt_nr helper has been extended to check
attributes in the matched events.
In this test, the 2 subflow closed events should have an error.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some subflow socket errors need to be reported to the MPTCP socket: the
initial subflow connect (MP_CAPABLE), and the ones from the fallback
sockets. The others are not propagated.
The issue is that sock_error() was used to retrieve the error, which was
also resetting the sk_err field. Because of that, when notifying the
userspace about subflow close events later on from the MPTCP worker, the
ssk->sk_err field was always 0.
Now, the error (sk_err) is only reset when propagating it to the msk.
Fixes: 15cc104533 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-3-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: subflow closed events are re-sent
with less info when the initial subflow is disconnected after an error
and each time a subflow is closed after that.
In this new test, the userspace PM is involved because that's how it was
discovered, but it is not specific to it. The initial subflow is
terminated with a RESET, and that will cause the subflow disconnect.
Then, a new subflow is initiated, but also got rejected, which cause a
second subflow closed event, but not a third one.
While at it, in case of failure to get the expected amount of events,
the events are printed.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d82809b6c5 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of subflow disconnect(), which can also happen with the first
subflow in case of errors like timeout or reset, mptcp_subflow_ctx_reset
will reset most fields from the mptcp_subflow_context structure,
including close_event_done. Then, when another subflow is closed, yet
another SUB_CLOSED event for the disconnected initial subflow is sent.
Because of the previous reset, there are no source address and
destination port.
A solution is then to also check the subflow's local id: it shouldn't be
negative anyway.
Another solution would be not to reset subflow->close_event_done at
disconnect time, but when reused. But then, probably the whole reset
could be done when being reused. Let's not change this logic, similar
to TCP with tcp_disconnect().
Fixes: d82809b6c5 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reported-by: Marco Angaroni <marco.angaroni@italtel.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/603
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-1-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 misc fixes 2026-01-27 [part]
This patchset provides misc bug fixes from the team
to the mlx5 core and Eth drivers.
====================
Link: https://patch.msgid.link/1769503961-124173-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a5e400a985 ("net/mlx5e: Honor user choice of IPsec replay
window size") introduced logic to setup the ESN replay window size.
This logic is only valid for packet offload.
However, the check to skip this block only covered outbound offloads.
It was not skipped for crypto offload, causing it to fall through to
the new switch statement and trigger its WARN_ON default case (for
instance, if a window larger than 256 bits was configured).
Fix this by amending the condition to also skip the replay window
setup if the offload type is not XFRM_DEV_OFFLOAD_PACKET.
Fixes: a5e400a985 ("net/mlx5e: Honor user choice of IPsec replay window size")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1769503961-124173-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
