The firmware-name property was originally introduced to allow end-users
and integrators to select use-case-specific firmware for the WCN6855.
However, specifying firmware for an M.2 WLAN module in the Device Tree
is not appropriate. Instead, this functionality will be handled within
the ath11k driver. Therefore, the firmware-name property is now
deprecated.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121095055.3683957-3-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
For M.2 WLAN chips, there is no suitable DTS node to specify the
firmware-name property. In addition, assigning firmware for the
M.2 PCIe interface causes chips that do not use usecase specific
firmware to fail. Therefore, abandoning the approach of specifying
firmware in DTS. As an alternative, propose a static lookup table
mapping device compatible to firmware names. Currently, only WCN6855
HW2.1 requires this.
However, support for the firmware-name property is retained to keep
the ABI backwards compatible.
For details on usecase specific firmware, see:
https://lore.kernel.org/all/20250522013444.1301330-3-miaoqing.pan@oss.qualcomm.com/.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04685-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Fixes: edbbc647c4 ("wifi: ath11k: support usercase-specific firmware overrides")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121095055.3683957-2-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath10k_sdio_fw_crashed_dump() calls ath10k_coredump_new() which requires
ar->dump_mutex to be held, as indicated by lockdep_assert_held() in that
function. However, the SDIO implementation does not acquire this lock,
unlike the PCI and SNOC implementations which properly hold the mutex.
Additionally, ar->stats.fw_crash_counter is documented as protected by
ar->data_lock in core.h, but the SDIO implementation modifies it without
holding this spinlock.
Add the missing mutex_lock()/mutex_unlock() around the coredump
operations, and add spin_lock_bh()/spin_unlock_bh() around the
fw_crash_counter increment, following the pattern used in
ath10k_pci_fw_dump_work() and ath10k_snoc_fw_crashed_dump().
Fixes: 3c45f21af8 ("ath10k: sdio: add firmware coredump support")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123045822.2221549-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath10k_wmi_event_peer_sta_ps_state_chg() uses lockdep_assert_held() to
assert that ar->data_lock should be held by the caller, but neither
ath10k_wmi_10_2_op_rx() nor ath10k_wmi_10_4_op_rx() acquire this lock
before calling this function.
The field arsta->peer_ps_state is documented as protected by
ar->data_lock in core.h, and other accessors (ath10k_peer_ps_state_disable,
ath10k_dbg_sta_read_peer_ps_state) properly acquire this lock.
Add spin_lock_bh()/spin_unlock_bh() around the peer_ps_state update,
and remove the lockdep_assert_held() to be aligned with new locking,
following the pattern used by other WMI event handlers in the driver.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260123175611.767731-1-n7l8m4@u.northwestern.edu
[removed excess blank line]
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The WCN39xx family of WiFi/BT chips incorporates a simple PMU, spreading
voltages over internal rails. Implement support for using powersequencer
for this family of ATH10k devices in addition to using regulators.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260119-wcn3990-pwrctl-v3-3-948df19f5ec2@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
SPS OCP (over current protection) is a mechanism to cut off power to
protect hardware. When this happens, raise an interrupt to signal driver,
which prints out a message to note hardware status.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260127085036.44060-7-pkshih@realtek.com
The LDO (Low Dropout Regulator) setting is missing after suspend/resume
in some platforms, and it will cause card loss. Therefore, reconfigure
this setting to avoid it.
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260127085036.44060-6-pkshih@realtek.com
Except for the 8852A, 8852B, 8851B, 8852BT, all subsequent chips use
HAXIDMA. Therefore, interrupts need to be disabled before swapping
firmware to avoid unexpected SER.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260127085036.44060-4-pkshih@realtek.com
SER (system error recovery) L0/L1 simulation has two kinds of methods.
How to choose them depends on FW features. But, Wi-Fi 7 misused them.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260127085036.44060-3-pkshih@realtek.com
Bhargava Marreddy says:
====================
bng_en: enhancements for RX and TX datapath
This series enhances the bng_en driver by adding:
1. Tx support (standard + TSO)
2. Rx support (standard + LRO/TPA)
====================
Link: https://patch.msgid.link/20260128185623.26559-1-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable TPA functionality in the VNIC and add functions
to handle TPA events, which help in processing LRO/GRO.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-9-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add AGG event handling in the RX path to receive packet data
on AGG rings. This enables Jumbo and HDS functionality.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-7-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add functions to support xmit along with TSO/GSO.
Also, add functions to handle TX completion events in the NAPI context.
This commit introduces the fundamental transmit data path
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul-rg.gupta@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-5-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the HWRM completion for a sent request lands on the NQ,
add functions to handle the HWRM completion event.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-4-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to receive packet using NAPI, build and deliver the skb
to stack. With help of meta data available in completions, fill the
appropriate information in skb.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul-rg.gupta@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-3-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to Lantech 8330-262D-E, the Lantech 8330-265D also reports
2500MBd instead of 3125MBd.
Also, all 8330-265D report normal RX_LOS in EEPROM, but some signal
inverted RX_LOS. We therefore need to ignore RX_LOS on these modules.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260128170044.15576-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch updates the count_eot calculation for CN20K devices.
Where the count_eot feild extended to 2 bits, while maintaining
CN10K compatibility where only bit 0 is used.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260128022448.4402-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
-----BEGIN PGP SIGNATURE-----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=70Rs
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjørn Mork says:
====================
Airoha AN8811HB 2.5 Gbps phy support
The RFC patch posted earlier has been split into a series based on the
feedback received:
1/3: preparing the EN8811H driver for maximum reuse
2/3: adding support for the new AN8811HB hardware
3/3: adding (optional) clock driver for AN8811HB
Patch 3/3 is not required for a functional device. It is included here
for full feature parity between the EN8811H and AN8811HB drivers.
The AN8811HB phy requires new firmware, which is now available with
the 20260110 release of linux-firmware,
====================
Link: https://patch.msgid.link/20260127125547.1475164-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement clk provider driver so we can disable the clock output when it
isn't needed. This helps to reduce EMF noise
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20260127125547.1475164-4-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Airoha AN8811HB is mostly compatible with the EN8811H, adding 10Base-T
support and reducing power consumption.
This driver is based on the air_an8811hb v0.0.4 out-of-tree driver
written by "Lucien.Jheng <lucien.jheng@airoha.com>"
Firmware is available in linux-firmware. The driver has been tested with
firmware version 25110702
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20260127125547.1475164-3-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver now depends on the core to tell it what the rx page size
should be for the agg ring. We must populate the ndo_default_qcfg
callback even if we don't support any queue ops.
This fixes:
Oops: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
RIP: 0010:bnxt_alloc_rx_page_pool (drivers/net/ethernet/broadcom/bnxt/bnxt.c:3852)
with fw version 225.1.109.0.
Link: https://lore.kernel.org/20250421222827.283737-20-kuba@kernel.org
Fixes: f96e1b3577 ("eth: bnxt: support qcfg provided rx page size")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260128193258.125274-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fan Gong says:
====================
net: hinic3: Fix code styles
This patchset provides 4 code styles fixes:
Remove empty lines between error handling.
Remove defensive txq_num check.
Use array_size instead of multiplying.
SQ use SQ_CTXT_PREF_CI_HI to improve readability.
====================
Link: https://patch.msgid.link/cover.1769656467.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fl6_update_dst() is called for every TCP (and others) transmit,
and is a nop for common cases.
Split it in two parts :
1) fl6_update_dst() inline helper, small and fast.
2) __fl6_update_dst() for the exception, out of line.
Small size increase to get better TX performance.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 2/2 grow/shrink: 8/0 up/down: 296/-125 (171)
Function old new delta
__fl6_update_dst - 104 +104
rawv6_sendmsg 2244 2284 +40
udpv6_sendmsg 3013 3043 +30
tcp_v6_connect 1514 1534 +20
cookie_v6_check 1501 1519 +18
ip6_datagram_dst_update 673 690 +17
inet6_sk_rebuild_header 499 516 +17
inet6_csk_route_socket 507 524 +17
inet6_csk_route_req 343 360 +17
__pfx___fl6_update_dst - 16 +16
__pfx_fl6_update_dst 16 - -16
fl6_update_dst 109 - -109
Total: Before=22570304, After=22570475, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128185548.3738781-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127125147.1642-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test_rss_flow_label_6only test case fails on devices that do not
support IPv6 flow label hashing. Make it skip neatly, consistent with
the behavior of the test_rss_flow_label case.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260128090217.663366-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: rk: second chunk of cleanups
This series is a cut-down installment of the dwmac-rk cleanups, covering
up to the point that the AI review had its first issue with the patches.
Unfortunately, this means that we introduce ->init but do not add any
users for it yet. That will be in the next round once this has got
through AI review and merged.
====================
Link: https://patch.msgid.link/aXnrzIbZN-gaZTia@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the definitions of the RGMII related xxx_GMAC_CLK_xxx definitions
use the same field values to select the clock rate. Provide common
definitions for these field values, passing them in to a single macro
for each variant that generates the appropriate values for the speed
register.
No change to produced code on aarch64.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vl3G0-00000006v3R-2ZBc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rk_gmac_setup() delves into the PHY's DT node to retrieve its reset
control using of_reset_control_get(). However, it never releases it
when the driver is removed. Add reset_control_put() to rk_gmac_exit()
to clean this up.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/E1vl3Fv-00000006v3L-215v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: report active phy interface
The original patch needs dwmac-thead fixed so the PHY_INTF* definitions
do not clash.
====================
Link: https://patch.msgid.link/aXnpTy6XckPGcmg0@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the active PHY interface from the point of view of the dwmac
hardware to the kernel log, where the core supports reading this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vl36F-00000006url-1fWA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid conflicts between stmmac PHY_INTF_* and GMAC_INTF_CTRL register
definitions by replacing the PHY_ prefix with GMAC_.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vl36A-00000006urf-19ox@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 9b443e58a8 ("net: stmmac: qcom-ethqos: remove MAC_CTRL_REG
modification"), ethqos->mac_base is only written, never read. Let's
remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vl39x-00000006uvc-0A3S@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The closing #endif comment in otx2_devlink.h refers to RVU_DEVLINK_H,
but the actual header guard is OTX2_DEVLINK_H.
Fix the comment to match the correct header guard name.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127174333.1247747-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the dpll subsystem exports the fractional frequency offset
(FFO) in parts per million (ppm). This granularity is insufficient for
high-precision synchronization scenarios which often require parts per
trillion (ppt) resolution.
Add a new netlink attribute DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET_PPT
to expose the FFO in ppt.
Update the dpll netlink core to expect the driver-provided FFO value
to be in ppt. To maintain backward compatibility with existing userspace
tools, populate the legacy DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET
attribute by dividing the new ppt value by 1,000,000.
Update the zl3073x and mlx5 drivers to provide the FFO value in ppt:
- zl3073x: adjust the fixed-point calculation to produce ppt (10^12)
instead of ppm (10^6).
- mlx5: scale the existing ppm value by 1,000,000.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260126162253.27890-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch moves netconsole selftests from drivers/net to its own target
in drivers/net/netconsole.
This change helps saving some resources from CI since tests in
drivers/net automatically run against real hardware which are not used
by netconsole tests as they rely solely on netdevsim.
lib_netcons.sh is kept under drivers/net/lib since it is also used by
bonding selftests. Finally, drivers/net config remains unchanged as
netpoll_basic.py requires netconsole (and does leverage real HW testing).
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Link: https://patch.msgid.link/20260127-netcons-selftest-target-v2-1-f509ab65b3bc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- L2CAP: Add support for setting BT_PHY
- HCI: Add LE Channel Sounding HCI Command/event structures
- hci_conn: Set link_policy on incoming ACL connections
- MGMT: Add idle_timeout to configurable system parameters
drivers:
- btusb: Add support for MediaTek7920 0489:e158
- btusb: Add device ID for Realtek RTL8761BU
- btusb: Reject autosuspend if discovery is active
- btusb: Add new VID/PID for RTL8852CE
- btusb: Add USB ID 0489:e112 for Realtek 8851BE
- dt-bindings: qcom: Split to separate schema
- btqca: Add WCN6855 firmware priority selection feature
-----BEGIN PGP SIGNATURE-----
iQJNBAABCgA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAml7xEwZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKZAnEACBXUlzYey49zIwVh/nExcS
0HD1qDl7i6RpgeDeTGbGNiHk5IiS79GJbFar7KbxdbWHozPos21kAu0tZxDsC2w+
KahxU1n3xHucO3YlXJh05W1SM3FLcHKM6o6Ib1+oycNAbWvfPMaYcG+vM34PBncM
qoTeb8U8f3nI6P92SSJxIr1Dnj4pzOuNifWZoPP/51jRHeZdqICdFSvrK9OsgQZi
dVyg+NIVgJav2q8BwnU8TAN6dmES9fnMEP8RDKDXH5IyKNG5eUdUEbceVj51+IUj
t7B7XyPmYhIR37CKidxKh09HXNSZ+IGKiIX3c9Jl0PoUKzyisiXp6tQxcp0Vo54+
IU9kZTMrI3MsWFh42PcHy1WBmBUxoHuy0y0+dMQ6xD1vOKI2z6yt07gxd4LIRZgZ
QTwrUExrteobnxhqWjiDrtLf4ZqRg57Vgyu4Y0klf60MaHFiKoxVOLT9OCZ0mxsA
fgoonLSvBJtRhl7lEUO/+p1enDvywVeZD9ygPFFuDSbM1TCOL116BVk5sHWZdQjD
K5i2zr80b4YYiMrkX+7bHbxgX/aEVeMQHFkyvSutrqQql8oCmsqB4rIx0LKPtZX+
lbixt6dR7MeCmcRgtPEmKUbG3vnt+1+NYziuAc1PtqvSxv4vfYjUOP/yZ0dpmsGk
RPEObC9dq1rv564g586Dvw==
=I+rw
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2026-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- L2CAP: Add support for setting BT_PHY
- HCI: Add LE Channel Sounding HCI Command/event structures
- hci_conn: Set link_policy on incoming ACL connections
- MGMT: Add idle_timeout to configurable system parameters
drivers:
- btusb: Add support for MediaTek7920 0489:e158
- btusb: Add device ID for Realtek RTL8761BU
- btusb: Reject autosuspend if discovery is active
- btusb: Add new VID/PID for RTL8852CE
- btusb: Add USB ID 0489:e112 for Realtek 8851BE
- dt-bindings: qcom: Split to separate schema
- btqca: Add WCN6855 firmware priority selection feature
* tag 'for-net-next-2026-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (40 commits)
Bluetooth: hci_qca: Enable HFP hardware offload for WCN6855 and WCN7850
Bluetooth: hci_qca: Refactor HFP hardware offload capability handling
Bluetooth: btusb: Add USB ID 7392:e611 for Edimax EW-7611UXB
Bluetooth: L2CAP: Fix not tracking outstanding TX ident
Bluetooth: MGMT: Fix memory leak in set_ssp_complete
Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work
Bluetooth: btusb: Remove duplicate entry for 0x13d3/0x3618
Bluetooth: btusb: Add device ID for Realtek RTL8761BU
Bluetooth: btintel: Remove unneeded CONFIG_PM* #ifdef's
Bluetooth: btnxpuart: Remove unneeded CONFIG_PM ifdef
Bluetooth: btusb: Add new VID/PID for RTL8852CE
Bluetooth: btintel_pcie: Remove unnecessary check before kfree_skb()
Bluetooth: btusb: Reject autosuspend if discovery is active
Bluetooth: hci_core: Export hci_discovery_active
Bluetooth: btusb: Use pm_ptr instead of #ifdef CONFIG_PM
dt-bindings: bluetooth: qcom,wcn7850-bt: Deprecate old supplies
dt-bindings: bluetooth: qcom,wcn7850-bt: Split to separate schema
dt-bindings: bluetooth: qcom,wcn6855-bt: Deprecate old supplies
dt-bindings: bluetooth: qcom,wcn6855-bt: Split to separate schema
dt-bindings: bluetooth: qcom,wcn6750-bt: Deprecate old supplies
...
====================
Link: https://patch.msgid.link/20260129203610.963067-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
