The mux smux2_xspi_clk{0,1} used for selecting spi and spix2 clocks and
pllcm33_xspi divider to select different clock rates. Add support for
both.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424081400.135028-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add definitions for XSPI core clock and Gigabit Ethernet PTP reference
core clocks in the R9A09G047 CPG DT bindings header file.
The clk_spi is modelled as a fixed divider clock with parent clk_spix2 and
factor two as both parent and child share same gating bit.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424081400.135028-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a forward-declare of struct of_phandle_args to prevent the compiler
warning:
../include/kunit/clk.h:29:63: warning: ‘struct of_phandle_args’ declared
inside parameter list will not be visible outside of this definition or
declaration
struct clk_hw *(*get)(struct of_phandle_args *clkspec, void *data),
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250327125214.82598-1-rf@opensource.cirrus.com
Fixes: a82fcb16d9 ("clk: test: Add test managed of_clk_add_hw_provider()")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Simplify of_davinci_pll_init() by using of_get_available_child_by_name().
While at it, move of_node_put(child) inside the if block to avoid
additional check if of_child is NULL.
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250410062040.6346-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
raspberrypi_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 93d2725aff ("clk: bcm: rpi: Discover the firmware clocks")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250402020513.42628-1-bsdhenrymartin@gmail.com
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Since commit fbac2e7787 ("clk: bcm: rpi: Allow the driver to
be probed by DT") the module alias isn't necessary anymore. So
we can drop it.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250415185614.16292-1-wahrenst@gmx.net
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
scaled_div_build() was added in 2014 by
commit 1f27f15258 ("clk: bcm281xx: add initial clock framework support")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250505013545.359745-1-linux@treblig.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The binding is already covered by st,stm32-rcc.yaml.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250505161933.1432791-1-robh@kernel.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the DT binding document for BCM2835 auxiliary peripheral clock
from .txt to YAML.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250503080949.3945-1-wahrenst@gmx.net
Acked-by: Conor Dooley <conor.dooley@microchip.com>
[sboyd@kernel.org: Drop aux label]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clock binding for Maxim MAX77686/MAX77802/MAX77620 is already
covered by mfd/maxim,max77686.yaml.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250505161943.1433081-1-robh@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Add GPU and USB2 clocks and resets on RZ/V2H(P),
- Add support for the RZ/V2N (R9A09G056) SoC,
- Add GPU clocks and resets on RZ/G3E,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaAt5fQAKCRCKwlD9ZEnx
cEaeAP9euhgy4PAmufr4+ImN0lLxAJS3zoO/tCtIKPq95q4BMwEA/ksiP76/+SGC
vd/OWSUn3f90r+jV26Xsy3iPHkhC/g0=
=T2RE
-----END PGP SIGNATURE-----
Merge tag 'renesas-clk-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull Renesas clk driver updates from Geert Uytterhoeven:
- Add GPU and USB2 clocks and resets on Renesas RZ/V2H(P)
- Add support for the Renesas RZ/V2N (R9A09G056) SoC
- Add GPU clocks and resets on Renesas RZ/G3E
* tag 'renesas-clk-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: (22 commits)
clk: renesas: r9a09g057: Add clock and reset entries for USB2
dt-bindings: clock: renesas,r9a09g057-cpg: Add USB2 PHY and GBETH PTP core clocks
clk: renesas: rzv2h: Use both CLK_ON and CLK_MON bits for clock state validation
clk: renesas: rzv2h: Use str_on_off() helper in rzv2h_mod_clock_endisable()
clk: renesas: rzv2h: Support static dividers without RMW
clk: renesas: rzv2h: Add macro for defining static dividers
clk: renesas: rzv2h: Add support for static mux clocks
clk: renesas: r9a09g047: Add clock and reset entries for GE3D
clk: renesas: rzv2h: Fix a typo
clk: renesas: rzv2h: Add support for RZ/V2N SoC
clk: renesas: rzv2h: Sort compatible list based on SoC part number
dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK
clk: renesas: rzv2h: Simplify rzv2h_cpg_assert()/rzv2h_cpg_deassert()
clk: renesas: rzv2h: Improve rzv2h_ddiv_set_rate()
clk: renesas: r9a09g057: Add clock and reset entries for GE3D
clk: renesas: rzv2h: Rename PLL field macros for consistency
clk: renesas: rzv2h: Add support for enabling PLLs
...
Convert vf610-clock.txt to yaml format.
Additional changes:
- swap audio_ext and enet_ext to match existed dts order
- remove clock consumer in example
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250411212339.3273202-1-Frank.Li@nxp.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Update the clock enable/disable logic to follow the latest hardware
manual's guidelines, ensuring that both CLK_ON and CLK_MON bits are used
to confirm the clock state.
According to the manual, enabling a clock requires setting the
CPG_CLK_ON bit and verifying the clock has started using the CPG_CLK_MON
bit. Similarly, disabling a clock requires clearing the CPG_CLK_ON bit
and confirming the clock has stopped via the CPG_CLK_MON bit.
Modify `rzv2h_mod_clock_is_enabled()` to check CLK_MON first and then
validate CLK_ON for a more accurate clock status evaluation.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for static dividers that do not require read-modify-write
(RMW) operations. This enables the use of the generic clk_divider_ops
instead of the custom RMW-based implementation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Co-developed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Unlike dynamic dividers, static dividers do not have a monitor bit.
Introduce the `DEF_CSDIV()` macro for defining static dividers, ensuring
consistency with existing dynamic divider macros.
Additionally, introduce the `CSDIV_NO_MON` macro to indicate the absence
of a monitor bit, allowing the monitoring step to be skipped when `mon`
is set to `CSDIV_NO_MON`.
Note, `rzv2h_cpg_ddiv_clk_register()` will be re-used instead of generic
`clk_hw_register_divider_table()` for registering satic dividers as some
of the static dividers require RMW operations.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for `CLK_TYPE_SMUX` to register static muxed clocks on the
Renesas RZ/V2H(P) SoC. Extend `cpg_core_clk` to include parent names,
mux flags, and a new `smuxed` struct. Update clock registration to
handle static mux clocks.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407165202.197570-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The control register for TWSI8 clocks, APBC_TWSI8_CLK_RST, contains mux
selection bits, reset assertion bit and enable bits for function and bus
clocks. It has a quirk that reading always results in zero.
As a workaround, let's hardcode the mux value as zero to select
pll1_d78_31p5 as parent and treat twsi8_clk as a gate, whose enable mask
is combined from the real bus and function clocks to avoid the
write-only register being shared between two clk_hws, in which case
updates of one clk_hw zero the other's bits.
With a 1:1 factor serving as placeholder for the bus clock, the I2C-8
controller could be brought up, which is essential for boards attaching
power-management chips to it.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-5-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
The clock tree of K1 SoC contains three main types of clock hardware
(PLL/DDN/MIX) and has control registers split into several multifunction
devices: APBS (PLLs), MPMU, APBC and APMU.
All register operations are done through regmap to ensure atomicity
between concurrent operations of clock driver and reset,
power-domain driver that will be introduced in the future.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-4-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Add definition for the PLL found on SpacemiT K1 SoC, which takes the
external 24MHz oscillator as input and generates clocks in various
frequencies for the system.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-3-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Document APMU, MPMU and APBC syscons found on SpacemiT K1 SoC, which are
capable of generating clock and reset signals. Additionally, APMU and MPMU
manage power domains.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-2-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
The clock structure for RZ/V2N is almost identical to RZ/V2H(P) SoC
with less IP blocks compared to RZ/V2H(P). For eg: CRU2/3 are present
only on the RZ/V2H(P) SoC.
Add minimal clock and reset entries required to boot the Renesas
RZ/V2N EVK and binds it with the RZ/V2H CPG family driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-9-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
DT bindings and binding definitions for the Renesas RZ/V2N (R9A09G056)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ/zMdQAKCRCKwlD9ZEnx
cPigAP97UeFb9VLWbPeUMSm6A2aPz4loif/U0G+SsYIe10CYgAEA17AYkjokTNGz
dOLVl3cj7EW6jIhuXmmK1/49Xc97IgU=
=fEuX
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g056-dt-binding-defs-tag1' into renesas-clk-for-v6.16
Renesas RZ/V2N DT Bindings and Definitions
DT bindings and binding definitions for the Renesas RZ/V2N (R9A09G056)
SoC, shared by driver and DT source files.
Reorder the compatible entries in `rzv2h_cpg_match[]` to follow a
numerical sequence based on the SoC part numbers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add documentation for the pin controller found on the Renesas RZ/V2N
(R9A09G056) SoC. The RZ/V2N PFC differs slightly from the RZ/G2L family
and is almost identical to the RZ/V2H(P) SoC, except that the RZ/V2H(P) SoC
has an additional dedicated pin.
To account for this, a SoC-specific compatible string,
'renesas,r9a09g056-pinctrl', is introduced for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the device tree bindings for the Renesas RZ/V2N (R9A09G056)
SoC Clock Pulse Generator (CPG).
Update `renesas,rzv2h-cpg.yaml` to include the compatible string for
RZ/V2N SoC and adjust the title and description accordingly.
Additionally, introduce `renesas,r9a09g056-cpg.h` to define core clock
constants for the RZ/V2N SoC. Note the existing RZ/V2H(P) family-specific
clock driver will be reused for this SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the RZ/V2N (R9A09G056) variant to the existing RZ/V2H(P) System
Controller (SYS) binding, as both IPs are very similar.
However, they have different SoC IDs, and the RZ/V2N does not have
PCIE1 configuration registers, unlike the RZ/V2H(P) SYS IP. To handle
these differences, introduce a new compatible string
`renesas,r9a09g056-sys`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the Renesas RZ/V2N (R9A09G056) SoC variants, distinguishing
between configurations with and without specific hardware features such
as GPU, ISP, and cryptographic extensions. Also, document the
"renesas,rzv2n-evk" compatible string for the RZ/V2N EVK board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Rename PLL field extraction macros to include the associated register name
(`CPG_PLL_CLK1` or `CPG_PLL_CLK2`) to maintain consistency with other PLL
register macros. Update all corresponding macro references accordingly.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Some RZ/V2H(P) SoC variants do not have a GPU, resulting in PLLGPU being
disabled by default in TF-A. Add support for enabling PLL clocks in the
RZ/V2H(P) CPG driver to manage this.
Introduce `is_enabled` and `enable` callbacks to handle PLL state
transitions. With the `enable` callback, PLLGPU will be turned ON only
when the GPU node is enabled; otherwise, it will remain off. Define new
macros for PLL standby and monitor registers to facilitate this process.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Remove the redundant `type` field from `struct pll_clk`, as it is not used
in the PLL clock handling logic.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Refactor PLL handling by introducing a `struct pll` to encapsulate PLL
configuration parameters, ensuring consistency with the existing dynamic
divider structure.
Introduce the `PLL_PACK()` macro to simplify PLL structure initialization
and update the `DEF_PLL()` macro to use the new `pll` structure. Modify
relevant clock register functions to utilize the structured PLL data
instead of raw configuration values.
This refactoring improves code readability, maintainability, and
alignment with the existing clock configuration approach.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309211402.80886-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.
Mirror this behaviour in the tools/ variant.
Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/
Fixes: c9fbaa8795 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
