The TAS module could not be configured when it's running in pending
status. We need disable the module and configure it again. However, the
pending status is not cleared after the module disabled. TC taprio set
will always return busy even it's disabled.
For example, a user uses tc-taprio to configure Qbv and a future
basetime. The TAS module will run in a pending status. There is no way
to reconfigure Qbv, it always returns busy.
Actually the TAS module can be reconfigured when it's disabled. So it
doesn't need to check the pending status if the TAS module is disabled.
After the patch, user can delete the tc taprio configuration to disable
Qbv and reconfigure it again.
Fixes: de143c0e27 ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload")
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Link: https://patch.msgid.link/20240906093550.29985-1-xiaoliang.yang_1@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the function hsr_proxy_annouance() added in the previous commit
5f703ce5c9 ("net: hsr: Send supervisory frames to HSR network
with ProxyNodeTable data"), the return value of the hsr_port_get_hsr()
function is not checked to be a NULL pointer, which causes a NULL
pointer dereference.
To solve this, we need to add code to check whether the return value
of hsr_port_get_hsr() is NULL.
Reported-by: syzbot+02a42d9b1bd395cbcab4@syzkaller.appspotmail.com
Fixes: 5f703ce5c9 ("net: hsr: Send supervisory frames to HSR network with ProxyNodeTable data")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lukasz Majewski <lukma@denx.de>
Link: https://patch.msgid.link/20240907190341.162289-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
selftests: mptcp: misc. small fixes
Here are some various fixes for the MPTCP selftests.
Patch 1 fixes a recently modified test to continue to work as expected
on older kernels. This is a fix for a recent fix that can be backported
up to v5.15.
Patch 2 and 3 include dependences when exporting or installing the
tests. Two fixes for v6.11-rc1.
====================
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-0-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, the net_helper.sh file from the parent
directory is used by the MPTCP selftests and it needs to be present when
running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: 1af3bc912e ("selftests: mptcp: lib: use wait_local_port_listen helper")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-3-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lib.sh file from the parent directory is used by the MPTCP selftests
and it needs to be present when running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: f265d3119a ("selftests: mptcp: lib: use setup/cleanup_ns helpers")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-2-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new endpoint using the IP of the initial subflow has been recently
added to increase the code coverage. But it breaks the test when using
old kernels not having commit 86e39e0448 ("mptcp: keep track of local
endpoint still available for each msk"), e.g. on v5.15.
Similar to commit d4c81bbb86 ("selftests: mptcp: join: support local
endpoint being tracked or not"), it is possible to add the new endpoint
conditionally, by checking if "mptcp_pm_subflow_check_next" is present
in kallsyms: this is not directly linked to the commit introducing this
symbol but for the parent one which is linked anyway. So we can know in
advance what will be the expected behaviour, and add the new endpoint
only when it makes sense to do so.
Fixes: 4878f9f842 ("selftests: mptcp: join: validate fullmesh endp on 1st sf")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-1-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-09-09 (ice, igb)
This series contains updates to ice and igb drivers.
Martyna moves LLDP rule removal to the proper uninitialization function
for ice.
Jake corrects accounting logic for FWD_TO_VSI_LIST switch filters on
ice.
Przemek removes incorrect, explicit calls to pci_disable_device() for
ice.
Michal Schmidt stops incorrect use of VSI list for VLAN use on ice.
Sriram Yagnaraman adjusts igb_xdp_ring_update_tail() to be called under
Tx lock on igb.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Always call igb_xdp_ring_update_tail() under Tx lock
ice: fix VSI lists confusion when adding VLANs
ice: stop calling pci_disable_device() as we use pcim
ice: fix accounting for filters shared by multiple VSIs
ice: Fix lldp packets dropping after changing the number of channels
====================
Link: https://patch.msgid.link/20240909203842.3109822-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmbfTw4ACgkQSD+KveBX
+j4jxggAnxuWbJuvFBVkiU+62SpPldhKy/ut7Dc3KTOOezb7HMD7suYawgZl0jxr
1cSltKL3lpmaN2FEKITRxESsOKjHqVShkWpZCi+c8hMwd+vWowlaO4r6BY/5ZYhj
2KPx3PjJl6d30d0gw4zMNu3XlOnpunuaRXJv5dbmRkz6G2XGVQzyOH2pfzSJWxyk
bcqYm/3Ma0psfEQhIP6I0LDBvHU4rOAlIGQN4IAzmLmwi4Whk6ECI7Q91v3PH/c9
nTJNTQhvyUJEc5aYuHftNU2MHlzejDPx5F3xd4dcQs30MXk5efSD9+OWnxHivjrP
c9GE3+PmWAWJtSLLb/iOMyTvY+x63Q==
=mGZl
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2024-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2024-09-09
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2024-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix bridge mode operations when there are no VFs
net/mlx5: Verify support for scheduling element and TSAR type
net/mlx5: Add missing masks and QoS bit masks for scheduling elements
net/mlx5: Explicitly set scheduling element and TSAR type
net/mlx5e: Add missing link mode to ptys2ext_ethtool_map
net/mlx5e: Add missing link modes to ptys2ethtool_map
net/mlx5: Update the list of the PCI supported devices
====================
Link: https://patch.msgid.link/20240909194505.69715-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add net/ethtool/pse-pd.c to PSE NETWORK DRIVER to receive emails concerning
modifications to the ethtool part.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240909114336.362174-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As Rob pointed in another mail thread [1], the binding of tja11xx PHY
is completely broken, the schema cannot catch the error in the DTS. A
compatiable string must be needed if we want to add a custom propety.
So extract known PHY IDs from the tja11xx PHY drivers and convert them
into supported compatible string list to fix the broken binding issue.
Fixes: 52b2fe4535 ("dt-bindings: net: tja11xx: add nxp,refclk_in property")
Link: https://lore.kernel.org/31058f49-bac5-49a9-a422-c43b121bf049@kernel.org # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240909012152.431647-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Padding is not included in UDP and TCP checksums. Therefore, reduce the
length of the checksummed data to include only the data in the IP
payload. This fixes spurious reported checksum failures like
rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe
pkt: bad csum
Technically it is possible for there to be trailing bytes after the UDP
data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) +
udp.len < ip.len). However, we don't generate such packets.
Fixes: 91a7de8560 ("selftests/net: add csum offload test")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The probe() function is only used for DP83822 and DP83826 PHY,
leaving the private data pointer uninitialized for the DP83825 models
which causes a NULL pointer dereference in the recently introduced/changed
functions dp8382x_config_init() and dp83822_set_wol().
Add the dp8382x_probe() function, so all PHY models will have a valid
private data pointer to fix this issue and also prevent similar issues
in the future.
Fixes: 9ef9ecfa9e ("net: phy: dp8382x: keep WOL settings across suspends")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/66w.ZbGt.65Ljx42yHo5.1csjxu@seznam.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit defd28aa5a.
Recover the code to disable premapped mode.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Takero Funaki <flintglass@gmail.com>
Link: https://patch.msgid.link/20240906123137.108741-2-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver only enables RX interrupt to handle RX
packets and TX resources. Sometimes there is not RX traffic,
so the TX resource needs to wait for RX interrupt to free.
This situation will toggle the TX timeout watchdog when the MAC
TX ring has no more resources to transmit packets.
Therefore, enable TX interrupt to release TX resources at any time.
When I am verifying iperf3 over UDP, the network hangs.
Like the log below.
root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0
Connecting to host 192.168.100.100, port 5201
[ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201
[ ID] Interval Transfer Bandwidth Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
[ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%)
[ 4] Sent 20 datagrams
iperf3: error - the server has terminated
The network topology is FTGMAC connects directly to a PC.
UDP does not need to wait for ACK, unlike TCP.
Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead
of waiting for the RX interrupt.
Fixes: 10cbd64076 ("ftgmac100: Rework NAPI & interrupts handling")
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.
Fixes: 5d9b976d44 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The grc must be initialize first. There can be a condition where if
fou is NULL, goto out will be executed and grc would be used
uninitialized.
Fixes: 7e41969350 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240906102839.202798-1-usama.anjum@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, trying to set the bridge mode attribute when numvfs=0 leads to a
crash:
bridge link set dev eth2 hwmode vepa
[ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030
[...]
[ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core]
[...]
[ 168.976037] Call Trace:
[ 168.976188] <TASK>
[ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core]
[ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core]
[ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0
[ 168.979714] rtnetlink_rcv_msg+0x159/0x400
[ 168.980451] netlink_rcv_skb+0x54/0x100
[ 168.980675] netlink_unicast+0x241/0x360
[ 168.980918] netlink_sendmsg+0x1f6/0x430
[ 168.981162] ____sys_sendmsg+0x3bb/0x3f0
[ 168.982155] ___sys_sendmsg+0x88/0xd0
[ 168.985036] __sys_sendmsg+0x59/0xa0
[ 168.985477] do_syscall_64+0x79/0x150
[ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 168.987773] RIP: 0033:0x7f8f7950f917
(esw->fdb_table.legacy.vepa_fdb is null)
The bridge mode is only relevant when there are multiple functions per
port. Therefore, prevent setting and getting this setting when there are no
VFs.
Note that after this change, there are no settings to change on the PF
interface using `bridge link` when there are no VFs, so the interface no
longer appears in the `bridge link` output.
Fixes: 4b89251de0 ("net/mlx5: Support ndo bridge_setlink and getlink")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Before creating a scheduling element in a NIC or E-Switch scheduler,
ensure that the requested element type is supported. If the element is
of type Transmit Scheduling Arbiter (TSAR), also verify that the
specific TSAR type is supported.
Fixes: 214baf2287 ("net/mlx5e: Support HTB offload")
Fixes: 85c5f7c920 ("net/mlx5: E-switch, Create QoS on demand")
Fixes: 0fe132eac3 ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add the missing masks for supported element types and Transmit
Scheduling Arbiter (TSAR) types in scheduling elements.
Also, add the corresponding bit masks for these types in the QoS
capabilities of a NIC scheduler.
Fixes: 214baf2287 ("net/mlx5e: Support HTB offload")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Ensure the scheduling element type and TSAR type are explicitly
initialized in the QoS rate group creation.
This prevents potential issues due to default values.
Fixes: 1ae258f8b3 ("net/mlx5: E-switch, Introduce rate limiting groups API")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add MLX5E_400GAUI_8_400GBASE_CR8 to the extended modes
in ptys2ext_ethtool_table, since it was missing.
Fixes: 6a89737241 ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy
modes in ptys2legacy_ethtool_table, since they were missing.
Fixes: 665bc53969 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add the upcoming ConnectX-9 device ID to the table of supported
PCI device IDs.
Fixes: f908a35b22 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Always call igb_xdp_ring_update_tail() under __netif_tx_lock, add a comment
and lockdep assert to indicate that. This is needed to share the same TX
ring between XDP, XSK and slow paths. Furthermore, the current XDP
implementation is racy on tail updates.
Fixes: 9cbc948b5a ("igb: add XDP support")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add lockdep assert and fixes tag]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The description of function ice_find_vsi_list_entry says:
Search VSI list map with VSI count 1
However, since the blamed commit (see Fixes below), the function no
longer checks vsi_count. This causes a problem in ice_add_vlan_internal,
where the decision to share VSI lists between filter rules relies on the
vsi_count of the found existing VSI list being 1.
The reproducing steps:
1. Have a PF and two VFs.
There will be a filter rule for VLAN 0, referring to a VSI list
containing VSIs: 0 (PF), 2 (VF#0), 3 (VF#1).
2. Add VLAN 1234 to VF#0.
ice will make the wrong decision to share the VSI list with the new
rule. The wrong behavior may not be immediately apparent, but it can
be observed with debug prints.
3. Add VLAN 1234 to VF#1.
ice will unshare the VSI list for the VLAN 1234 rule. Due to the
earlier bad decision, the newly created VSI list will contain
VSIs 0 (PF) and 3 (VF#1), instead of expected 2 (VF#0) and 3 (VF#1).
4. Try pinging a network peer over the VLAN interface on VF#0.
This fails.
Reproducer script at:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/test-vlan-vsi-list-confusion.sh
Commented debug trace:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/ice-vlan-vsi-lists-debug.txt
Patch adding the debug prints:
f8a8814623
(Unsafe, by the way. Lacks rule_lock when dumping in ice_remove_vlan.)
Michal Swiatkowski added to the explanation that the bug is caused by
reusing a VSI list created for VLAN 0. All created VFs' VSIs are added
to VLAN 0 filter. When a non-zero VLAN is created on a VF which is already
in VLAN 0 (normal case), the VSI list from VLAN 0 is reused.
It leads to a problem because all VFs (VSIs to be specific) that are
subscribed to VLAN 0 will now receive a new VLAN tag traffic. This is
one bug, another is the bug described above. Removing filters from
one VF will remove VLAN filter from the previous VF. It happens a VF is
reset. Example:
- creation of 3 VFs
- we have VSI list (used for VLAN 0) [0 (pf), 2 (vf1), 3 (vf2), 4 (vf3)]
- we are adding VLAN 100 on VF1, we are reusing the previous list
because 2 is there
- VLAN traffic works fine, but VLAN 100 tagged traffic can be received
on all VSIs from the list (for example broadcast or unicast)
- trust is turning on VF2, VF2 is resetting, all filters from VF2 are
removed; the VLAN 100 filter is also removed because 3 is on the list
- VLAN traffic to VF1 isn't working anymore, there is a need to recreate
VLAN interface to readd VLAN filter
One thing I'm not certain about is the implications for the LAG feature,
which is another caller of ice_find_vsi_list_entry. I don't have a
LAG-capable card at hand to test.
Fixes: 23ccae5ce1 ("ice: changes to the interface with the HW and FW for SRIOV_VF+LAG")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Dave Ertman <David.m.ertman@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Our driver uses devres to manage resources, in particular we call
pcim_enable_device(), what also means we express the intent to get
automatic pci_disable_device() call at driver removal. Manual calls to
pci_disable_device() misuse the API.
Recent commit (see "Fixes" tag) has changed the removal action from
conditional (silent ignore of double call to pci_disable_device()) to
unconditional, but able to catch unwanted redundant calls; see cited
"Fixes" commit for details.
Since that, unloading the driver yields following warn+splat:
[70633.628490] ice 0000:af:00.7: disabling already-disabled device
[70633.628512] WARNING: CPU: 52 PID: 33890 at drivers/pci/pci.c:2250 pci_disable_device+0xf4/0x100
...
[70633.628744] ? pci_disable_device+0xf4/0x100
[70633.628752] release_nodes+0x4a/0x70
[70633.628759] devres_release_all+0x8b/0xc0
[70633.628768] device_unbind_cleanup+0xe/0x70
[70633.628774] device_release_driver_internal+0x208/0x250
[70633.628781] driver_detach+0x47/0x90
[70633.628786] bus_remove_driver+0x80/0x100
[70633.628791] pci_unregister_driver+0x2a/0xb0
[70633.628799] ice_module_exit+0x11/0x3a [ice]
Note that this is the only Intel ethernet driver that needs such fix.
Fixes: f748a07a0b ("PCI: Remove legacy pcim_release()")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When adding a switch filter (such as a MAC or VLAN filter), it is expected
that the driver will detect the case where the filter already exists, and
return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr,
and ice_vsi_add_vlan to avoid incrementing the accounting fields such as
vsi->num_vlan or vf->num_mac.
This logic works correctly for the case where only a single VSI has added a
given switch filter.
When a second VSI adds the same switch filter, the driver converts the
existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST
filter. This saves switch resources, by ensuring that multiple VSIs can
re-use the same filter.
The ice_add_update_vsi_list() function is responsible for doing this
conversion. When first converting a filter from the FWD_TO_VSI into
FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the
existing rule's VSI. In such a case it returns -EEXIST.
However, when the switch rule has already been converted to a
FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just
requires extending the VSI list entry. The logic for checking if the rule
already exists in this case returns 0 instead of -EEXIST.
This breaks the accounting logic mentioned above, so the counters for how
many MAC and VLAN filters exist for a given VF or VSI no longer accurately
reflect the actual count. This breaks other code which relies on these
counts.
In typical usage this primarily affects such filters generally shared by
multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses.
Fix this by correctly reporting -EEXIST in the case of adding the same VSI
to a switch rule already converted to ICE_FWD_TO_VSI_LIST.
Fixes: 9daf8208dd ("ice: Add support for switch filter programming")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After vsi setup refactor commit 6624e780a5 ("ice: split ice_vsi_setup
into smaller functions") ice_cfg_sw_lldp function which removes rx rule
directing LLDP packets to vsi is moved from ice_vsi_release to
ice_vsi_decfg function. ice_vsi_decfg is used in more cases than just in
vsi_release resulting in unnecessary removal of rx lldp packets handling
switch rule. This leads to lldp packets being dropped after a change number
of channels via ethtool.
This patch moves ice_cfg_sw_lldp function that removes rx lldp sw rule back
to ice_vsi_release function.
Fixes: 6624e780a5 ("ice: split ice_vsi_setup into smaller functions")
Reported-by: Matěj Grégr <mgregr@netx.as>
Closes: https://lore.kernel.org/intel-wired-lan/1be45a76-90af-4813-824f-8398b69745a9@netx.as/T/#u
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open
- eth: r8152: fix the firmware communication error due to use
of bulk write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ju86
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, bluetooth and wireless.
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during
mcp251x_open
- eth: r8152: fix the firmware communication error due to use of bulk
write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h"
* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
ila: call nf_unregister_net_hooks() sooner
tools/net/ynl: fix cli.py --subscribe feature
MAINTAINERS: fix ptp ocp driver maintainers address
selftests: net: enable bind tests
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
sched: sch_cake: fix bulk flow accounting logic for host fairness
docs: netdev: document guidance on cleanup.h
net: xilinx: axienet: Fix race in axienet_stop
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
r8152: fix the firmware doesn't work
fou: Fix null-ptr-deref in GRO.
bareudp: Fix device stats updates.
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
bpf, net: Fix a potential race in do_sock_getsockopt()
net: dqs: Do not use extern for unused dql_group
sch/netem: fix use after free in netem_dequeue
usbnet: modern method to get random MAC
MAINTAINERS: wifi: cw1200: add net-cw1200.h
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
...
A few small driver specific fixes (including some of the widespread work
on fixing missing ID tables for module autoloading and the revert of
some problematic PM work in spi-rockchip), some improvements to the
MAINTAINERS information for the NXP drivers and the addition of a new
device ID to spidev.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbaK/gACgkQJNaLcl1U
h9DzvAf+LDdI7hKt61JqwMNpmAB9n2AlXBCksfiWHVVXqoYaRBUQeMsoXjaAmkZ5
CAZneRV0yud9JR9BdRWITbYkMc3XzoMVDN5Z6C329lQjAJKyOE4n/VhgODcT1Hcj
PmKigUI0Ub6xEq7NyZZxl4/W/1Pp8Ybg2Z1+1aF4vW2SVMGg6+NlmEZitV61M64f
ZHH4c6SpW1fQPcUeNzlhOg3v6dGuyDf1/Mn4gopdrNzXP8VUvltMtnKBo4xZk34o
kMxXMgWQ8bDD6vHQP7P50D49y70OMmoySo4GkWpnyzuIQVEN1W/QoC3py2NbPhQE
WtAgG/9sf90tuPgaDQ6h3fknbYEGZg==
=fedt
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes (including some of the widespread
work on fixing missing ID tables for module autoloading and the revert
of some problematic PM work in spi-rockchip), some improvements to the
MAINTAINERS information for the NXP drivers and the addition of a new
device ID to spidev"
* tag 'spi-fix-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi drivers
MAINTAINERS: SPI: Add freescale lpspi maintainer information
spi: spi-fsl-lpspi: Fix off-by-one in prescale max
spi: spidev: Add missing spi_device_id for jg10309-01
spi: bcm63xx: Enable module autoloading
spi: intel: Add check devm_kasprintf() returned value
spi: spidev: Add an entry for elgin,jg10309-01
spi: rockchip: Resolve unbalanced runtime PM / system PM handling
A fix from Doug Anderson for a missing stub, required to fix the build
for some newly added users of devm_regulator_bulk_get_const() in
!REGULATOR configurations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbaKwgACgkQJNaLcl1U
h9A0Twf+Nw4D6a/LVuGTArpWXahY/HEP/BndU9Su4modr30SQY1/Ih4/PMAlIVyd
RQvWTGXZdesxv04gOM9TSoLl7IUgVR5nrVPbj7H36C+Nw+l9e6lH24+PgVN96FIb
jFXOAyI6ka+ghj3xRlxObDqnjxRBFdcY6WTw2RbaJIPj3XjY3EQ9gQhp2k75ktTS
JWU0QX5Q9jaNirQGjLUuDRNyhIZZHur7VM1TuzH44qDmbZ/O5e3UKQUAWUGKJgxE
bH64OYvQjWPnbhr0ABOPRd+0cVCAXbW+7KxcnhhHtIf/023YCAmMIDqAjsLlIzvP
cb3sWErzFS7pzQUTE1RMMbbfQ/eqKw==
=hPtk
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.11-stub' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A fix from Doug Anderson for a missing stub, required to fix the build
for some newly added users of devm_regulator_bulk_get_const() in
!REGULATOR configurations"
* tag 'regulator-fix-v6.11-stub' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Stub devm_regulator_bulk_get_const() if !CONFIG_REGULATOR
Toolchain and infrastructure:
- Fix builds for nightly compiler users now that 'new_uninit' was split
into new features by using an alternative approach for the code that
used what is now called the 'box_uninit_write' feature.
- Allow the 'stable_features' lint to preempt upcoming warnings about
them, since soon there will be unstable features that will become
stable in nightly compilers.
- Export bss symbols too.
'kernel' crate:
- 'block' module: fix wrong usage of lockdep API.
'macros' crate:
- Provide correct provenance when constructing 'THIS_MODULE'.
Documentation:
- Remove unintended indentation (blockquotes) in generated output.
- Fix a couple typos.
MAINTAINERS:
- Remove Wedson as Rust maintainer.
- Update Andreas' email.
-----BEGIN PGP SIGNATURE-----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=nJge
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix builds for nightly compiler users now that 'new_uninit' was
split into new features by using an alternative approach for the
code that used what is now called the 'box_uninit_write' feature
- Allow the 'stable_features' lint to preempt upcoming warnings about
them, since soon there will be unstable features that will become
stable in nightly compilers
- Export bss symbols too
'kernel' crate:
- 'block' module: fix wrong usage of lockdep API
'macros' crate:
- Provide correct provenance when constructing 'THIS_MODULE'
Documentation:
- Remove unintended indentation (blockquotes) in generated output
- Fix a couple typos
MAINTAINERS:
- Remove Wedson as Rust maintainer
- Update Andreas' email"
* tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: update Andreas Hindborg's email address
MAINTAINERS: Remove Wedson as Rust maintainer
rust: macros: provide correct provenance when constructing THIS_MODULE
rust: allow `stable_features` lint
docs: rust: remove unintended blockquote in Quick Start
rust: alloc: eschew `Box<MaybeUninit<T>>::write`
rust: kernel: fix typos in code comments
docs: rust: remove unintended blockquote in Coding Guidelines
rust: block: fix wrong usage of lockdep API
rust: kbuild: fix export of bss symbols
- Fix adding a new fgraph callback after function graph tracing has
already started.
If the new caller does not initialize its hash before registering the
fgraph_ops, it can cause a NULL pointer dereference. Fix this by adding
a new parameter to ftrace_graph_enable_direct() passing in the newly
added gops directly and not rely on using the fgraph_array[], as entries
in the fgraph_array[] must be initialized. Assign the new gops to the
fgraph_array[] after it goes through ftrace_startup_subops() as that
will properly initialize the gops->ops and initialize its hashes.
- Fix a memory leak in fgraph storage memory test.
If the "multiple fgraph storage on a function" boot up selftest
fails in the registering of the function graph tracer, it will
not free the memory it allocated for the filter. Break the loop
up into two where it allocates the filters first and then registers
the functions where any errors will do the appropriate clean ups.
- Only clear the timerlat timers if it has an associated kthread.
In the rtla tool that uses timerlat, if it was killed just as it
was shutting down, the signals can free the kthread and the timer.
But the closing of the timerlat files could cause the hrtimer_cancel()
to be called on the already freed timer. As the kthread variable is
is set to NULL when the kthreads are stopped and the timers are freed
it can be used to know not to call hrtimer_cancel() on the timer if
the kthread variable is NULL.
- Use a cpumask to keep track of osnoise/timerlat kthreads
The timerlat tracer can use user space threads for its analysis.
With the killing of the rtla tool, the kernel can get confused
between if it is using a user space thread to analyze or one of its
own kernel threads. When this confusion happens, kthread_stop()
can be called on a user space thread and bad things happen.
As the kernel threads are per-cpu, a bitmask can be used to know
when a kernel thread is used or when a user space thread is used.
- Add missing interface_lock to osnoise/timerlat stop_kthread()
The stop_kthread() function in osnoise/timerlat clears the
osnoise kthread variable, and if it was a user space thread does
a put_task on it. But this can race with the closing of the timerlat
files that also does a put_task on the kthread, and if the race happens
the task will have put_task called on it twice and oops.
- Add cond_resched() to the tracing_iter_reset() loop.
The latency tracers keep writing to the ring buffer without resetting
when it issues a new "start" event (like interrupts being disabled).
When reading the buffer with an iterator, the tracing_iter_reset()
sets its pointer to that start event by walking through all the events
in the buffer until it gets to the time stamp of the start event.
In the case of a very large buffer, the loop that looks for the start
event has been reported taking a very long time with a non preempt kernel
that it can trigger a soft lock up warning. Add a cond_resched() into
that loop to make sure that doesn't happen.
- Use list_del_rcu() for eventfs ei->list variable
It was reported that running loops of creating and deleting kprobe events
could cause a crash due to the eventfs list iteration hitting a LIST_POISON
variable. This is because the list is protected by SRCU but when an item is
deleted from the list, it was using list_del() which poisons the "next"
pointer. This is what list_del_rcu() was to prevent.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZtohNBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtoNAQDQKjomYLCpLz2EqgHZ6VB81QVrHuqt
cU7xuEfUJDzyyAEA/n0t6quIdjYRd6R2/KxGkP6By/805Coq4IZMTgNQmw0=
=nZ7k
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix adding a new fgraph callback after function graph tracing has
already started.
If the new caller does not initialize its hash before registering the
fgraph_ops, it can cause a NULL pointer dereference. Fix this by
adding a new parameter to ftrace_graph_enable_direct() passing in the
newly added gops directly and not rely on using the fgraph_array[],
as entries in the fgraph_array[] must be initialized.
Assign the new gops to the fgraph_array[] after it goes through
ftrace_startup_subops() as that will properly initialize the
gops->ops and initialize its hashes.
- Fix a memory leak in fgraph storage memory test.
If the "multiple fgraph storage on a function" boot up selftest fails
in the registering of the function graph tracer, it will not free the
memory it allocated for the filter. Break the loop up into two where
it allocates the filters first and then registers the functions where
any errors will do the appropriate clean ups.
- Only clear the timerlat timers if it has an associated kthread.
In the rtla tool that uses timerlat, if it was killed just as it was
shutting down, the signals can free the kthread and the timer. But
the closing of the timerlat files could cause the hrtimer_cancel() to
be called on the already freed timer. As the kthread variable is is
set to NULL when the kthreads are stopped and the timers are freed it
can be used to know not to call hrtimer_cancel() on the timer if the
kthread variable is NULL.
- Use a cpumask to keep track of osnoise/timerlat kthreads
The timerlat tracer can use user space threads for its analysis. With
the killing of the rtla tool, the kernel can get confused between if
it is using a user space thread to analyze or one of its own kernel
threads. When this confusion happens, kthread_stop() can be called on
a user space thread and bad things happen. As the kernel threads are
per-cpu, a bitmask can be used to know when a kernel thread is used
or when a user space thread is used.
- Add missing interface_lock to osnoise/timerlat stop_kthread()
The stop_kthread() function in osnoise/timerlat clears the osnoise
kthread variable, and if it was a user space thread does a put_task
on it. But this can race with the closing of the timerlat files that
also does a put_task on the kthread, and if the race happens the task
will have put_task called on it twice and oops.
- Add cond_resched() to the tracing_iter_reset() loop.
The latency tracers keep writing to the ring buffer without resetting
when it issues a new "start" event (like interrupts being disabled).
When reading the buffer with an iterator, the tracing_iter_reset()
sets its pointer to that start event by walking through all the
events in the buffer until it gets to the time stamp of the start
event. In the case of a very large buffer, the loop that looks for
the start event has been reported taking a very long time with a non
preempt kernel that it can trigger a soft lock up warning. Add a
cond_resched() into that loop to make sure that doesn't happen.
- Use list_del_rcu() for eventfs ei->list variable
It was reported that running loops of creating and deleting kprobe
events could cause a crash due to the eventfs list iteration hitting
a LIST_POISON variable. This is because the list is protected by SRCU
but when an item is deleted from the list, it was using list_del()
which poisons the "next" pointer. This is what list_del_rcu() was to
prevent.
* tag 'trace-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()
tracing/timerlat: Only clear timer if a kthread exists
tracing/osnoise: Use a cpumask to know what threads are kthreads
eventfs: Use list_del_rcu() for SRCU protected list variable
tracing: Avoid possible softlockup in tracing_iter_reset()
tracing: Fix memory leak in fgraph storage selftest
tracing: fgraph: Fix to add new fgraph_ops to array after ftrace_startup_subops()
Execution of command:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml /
--subscribe "monitor" --sleep 10
fails with:
File "/repo/./tools/net/ynl/cli.py", line 109, in main
ynl.check_ntf()
File "/repo/tools/net/ynl/lib/ynl.py", line 924, in check_ntf
op = self.rsp_by_value[nl_msg.cmd()]
KeyError: 19
Parsing Generic Netlink notification messages performs lookup for op in
the message. The message was not yet decoded, and is not yet considered
GenlMsg, thus msg.cmd() returns Generic Netlink family id (19) instead of
proper notification command id (i.e.: DPLL_CMD_PIN_CHANGE_NTF=13).
Allow the op to be obtained within NetlinkProtocol.decode(..) itself if the
op was not passed to the decode function, thus allow parsing of Generic
Netlink notifications without causing the failure.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/netdev/m2le0n5xpn.fsf@gmail.com/
Fixes: 0a966d606c ("tools/net/ynl: Fix extack decoding for directional ops")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240904135034.316033-1-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While checking the latest series for ptp_ocp driver I realised that
MAINTAINERS file has wrong item about email on linux.dev domain.
Fixes: 795fd9342c ("ptp_ocp: adjust MAINTAINERS and mailmap")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904131855.559078-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bind_wildcard is compiled but not run, bind_timewait is not compiled.
These two tests complete in a very short time, use the test harness
properly, and seem reasonable to enable.
The author of the tests confirmed via email that these were
intended to be run.
Enable these two tests.
Fixes: 13715acf8a ("selftest: Add test for bind() conflicts.")
Fixes: 2c042e8e54 ("tcp: Add selftest for bind() and TIME_WAIT.")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes:
- amd/pmf: ASUS GA403 quirk matching tweak
- dell-smbios: Fix to the init function rollback path
The following is an automated shortlog grouped by driver:
amd: pmf:
- Make ASUS GA403 quirk generic
dell-smbios:
- Fix error path in dell_smbios_init()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZtlyNgAKCRBZrE9hU+XO
Mey1AQDj6LTAoIQkcGw9airgUfAG2H69DaB0KYkiGj59FDrAqQEAzAZ11bttkqon
e4KsvC8K4tZhhHPQsbuUB97sDmcBwAw=
=W6Fk
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmf: ASUS GA403 quirk matching tweak
- dell-smbios: Fix to the init function rollback path
* tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd: pmf: Make ASUS GA403 quirk generic
platform/x86: dell-smbios: Fix error path in dell_smbios_init()
This kunit update for Linux 6.11-rc7 consist of one single fix to
a use-after-free bug resulting from kunit_driver_create() failing
to copy the driver name leaving it on the stack or freeing it.
-----BEGIN PGP SIGNATURE-----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=JRC5
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fix fromShuah Khan:
"One single fix to a use-after-free bug resulting from
kunit_driver_create() failing to copy the driver name leaving it on
the stack or freeing it"
* tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Device wrappers should also manage driver name
The timerlat interface will get and put the task that is part of the
"kthread" field of the osn_var to keep it around until all references are
released. But here's a race in the "stop_kthread()" code that will call
put_task_struct() on the kthread if it is not a kernel thread. This can
race with the releasing of the references to that task struct and the
put_task_struct() can be called twice when it should have been called just
once.
Take the interface_lock() in stop_kthread() to synchronize this change.
But to do so, the function stop_per_cpu_kthreads() needs to change the
loop from for_each_online_cpu() to for_each_possible_cpu() and remove the
cpu_read_lock(), as the interface_lock can not be taken while the cpu
locks are held. The only side effect of this change is that it may do some
extra work, as the per_cpu variables of the offline CPUs would not be set
anyway, and would simply be skipped in the loop.
Remove unneeded "return;" in stop_kthread().
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905113359.2b934242@gandalf.local.home
Fixes: e88ed227f6 ("tracing/timerlat: Add user-space interface")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The timerlat tracer can use user space threads to check for osnoise and
timer latency. If the program using this is killed via a SIGTERM, the
threads are shutdown one at a time and another tracing instance can start
up resetting the threads before they are fully closed. That causes the
hrtimer assigned to the kthread to be shutdown and freed twice when the
dying thread finally closes the file descriptors, causing a use-after-free
bug.
Only cancel the hrtimer if the associated thread is still around. Also add
the interface_lock around the resetting of the tlat_var->kthread.
Note, this is just a quick fix that can be backported to stable. A real
fix is to have a better synchronization between the shutdown of old
threads and the starting of new ones.
Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240905085330.45985730@gandalf.local.home
Fixes: e88ed227f6 ("tracing/timerlat: Add user-space interface")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The start_kthread() and stop_thread() code was not always called with the
interface_lock held. This means that the kthread variable could be
unexpectedly changed causing the kthread_stop() to be called on it when it
should not have been, leading to:
while true; do
rtla timerlat top -u -q & PID=$!;
sleep 5;
kill -INT $PID;
sleep 0.001;
kill -TERM $PID;
wait $PID;
done
Causing the following OOPS:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:hrtimer_active+0x58/0x300
Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f
RSP: 0018:ffff88811d97f940 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b
RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28
RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60
R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d
R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28
FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0
Call Trace:
<TASK>
? die_addr+0x40/0xa0
? exc_general_protection+0x154/0x230
? asm_exc_general_protection+0x26/0x30
? hrtimer_active+0x58/0x300
? __pfx_mutex_lock+0x10/0x10
? __pfx_locks_remove_file+0x10/0x10
hrtimer_cancel+0x15/0x40
timerlat_fd_release+0x8e/0x1f0
? security_file_release+0x43/0x80
__fput+0x372/0xb10
task_work_run+0x11e/0x1f0
? _raw_spin_lock+0x85/0xe0
? __pfx_task_work_run+0x10/0x10
? poison_slab_object+0x109/0x170
? do_exit+0x7a0/0x24b0
do_exit+0x7bd/0x24b0
? __pfx_migrate_enable+0x10/0x10
? __pfx_do_exit+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x64/0x140
? _raw_spin_lock_irq+0x86/0xe0
do_group_exit+0xb0/0x220
get_signal+0x17ba/0x1b50
? vfs_read+0x179/0xa40
? timerlat_fd_read+0x30b/0x9d0
? __pfx_get_signal+0x10/0x10
? __pfx_timerlat_fd_read+0x10/0x10
arch_do_signal_or_restart+0x8c/0x570
? __pfx_arch_do_signal_or_restart+0x10/0x10
? vfs_read+0x179/0xa40
? ksys_read+0xfe/0x1d0
? __pfx_ksys_read+0x10/0x10
syscall_exit_to_user_mode+0xbc/0x130
do_syscall_64+0x74/0x110
? __pfx___rseq_handle_notify_resume+0x10/0x10
? __pfx_ksys_read+0x10/0x10
? fpregs_restore_userregs+0xdb/0x1e0
? fpregs_restore_userregs+0xdb/0x1e0
? syscall_exit_to_user_mode+0x116/0x130
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
? do_syscall_64+0x74/0x110
entry_SYSCALL_64_after_hwframe+0x71/0x79
RIP: 0033:0x7ff0070eca9c
Code: Unable to access opcode bytes at 0x7ff0070eca72.
RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c
RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003
RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0
R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008
</TASK>
Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core
---[ end trace 0000000000000000 ]---
This is because it would mistakenly call kthread_stop() on a user space
thread making it "exit" before it actually exits.
Since kthreads are created based on global behavior, use a cpumask to know
when kthreads are running and that they need to be shutdown before
proceeding to do new work.
Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/
This was debugged by using the persistent ring buffer:
Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/
Note, locking was originally used to fix this, but that proved to cause too
many deadlocks to work around:
https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home
Fixes: e88ed227f6 ("tracing/timerlat: Add user-space interface")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In __tracing_open(), when max latency tracers took place on the cpu,
the time start of its buffer would be updated, then event entries with
timestamps being earlier than start of the buffer would be skipped
(see tracing_iter_reset()).
Softlockup will occur if the kernel is non-preemptible and too many
entries were skipped in the loop that reset every cpu buffer, so add
cond_resched() to avoid it.
Cc: stable@vger.kernel.org
Fixes: 2f26ebd549 ("tracing: use timestamp to determine start of latency traces")
Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
