mirror of
https://github.com/torvalds/linux.git
synced 2026-07-28 01:55:51 +02:00
70031e70ca
1424320 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Adrian Freund
|
70031e70ca |
HID: logitech-hidpp: Enable MX Master 4 over bluetooth
The Logitech MX Master 4 can be connected over bluetooth or through a Logitech Bolt receiver. This change adds support for non-standard HID features, such as high resolution scrolling when the mouse is connected over bluetooth. Because no Logitech Bolt receiver driver exists yet those features won't be available when the mouse is connected through the receiver. Signed-off-by: Adrian Freund <adrian@freund.io> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Hans de Goede
|
227312b4a6 |
HID: input: Add HID_BATTERY_QUIRK_DYNAMIC for Elan touchscreens
Elan touchscreens have a HID-battery device for the stylus which is always there even if there is no stylus. This is causing upower to report an empty battery for the stylus and some desktop-environments will show a notification about this, which is quite annoying. Because of this the HID-battery is being ignored on all Elan I2c and USB touchscreens, but this causes there to be no battery reporting for the stylus at all. This adds a new HID_BATTERY_QUIRK_DYNAMIC and uses these for the Elan touchscreens. This new quirks causes the present value of the battery to start at 0, which will make userspace ignore it and only sets present to 1 after receiving a battery input report which only happens when the stylus gets in range. Reported-by: ggrundik@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221118 Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Hans de Goede
|
487b23afaf |
HID: input: Drop Asus UX550* touchscreen ignore battery quirks
Drop the Asus UX550* touchscreen ignore battery quirks, there is a blanket HID_BATTERY_QUIRK_IGNORE for all USB_VENDOR_ID_ELAN USB touchscreens now, so these are just a duplicate of those. Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Denis Benato
|
d1afcd7165 |
HID: asus: add xg mobile 2022 external hardware support
XG mobile station 2022 has a different PID than the 2023 model: add it that model to hid-asus. Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Benoît Sevens
|
2f1763f629 |
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received. Signed-off-by: Benoît Sevens <bsevens@google.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Romain Sioen
|
e31b556c0b |
HID: mcp2221: cancel last I2C command on read error
When an I2C SMBus read operation fails, the MCP2221 internal state machine may not reset correctly, causing subsequent transactions to fail. By adding a short delay and explicitly cancelling the last command, we ensure the device is ready for the next operation. Fix an issue where i2cdetect was not able to detect all devices correctly on the bus. Signed-off-by: Romain Sioen <romain.sioen@microchip.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Denis Benato
|
377f8e7889 |
HID: asus: add xg mobile 2023 external hardware support
XG mobile stations have the 0x5a endpoint and has to be initialized: add them to hid-asus. Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Werner Sembach
|
ec3070f01f |
HID: multitouch: Keep latency normal on deactivate for reactivation gesture
Uniwill devices have a built in gesture in the touchpad to de- and reactivate it by double taping the upper left corner. This gesture stops working when latency is set to high, so this patch keeps the latency on normal. Cc: stable@vger.kernel.org Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> [jkosina@suse.com: change bit from 24 to 25] [jkosina@suse.com: update shortlog] Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Takashi Iwai
|
7c698de0dc |
HID: apple: Add EPOMAKER TH87 to the non-apple keyboards list
EPOMAKER TH87 has the very same ID as Apple Aluminum keyboard
(05ac:024f) although it doesn't work as expected in compatible way.
Put three entries to the non-apple keyboards list to exclude this
device: one for BT ("TH87"), one for USB ("HFD Epomaker TH87") and one
for dongle ("2.4G Wireless Receiver").
Link: https://bugzilla.suse.com/show_bug.cgi?id=1258455
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
||
|
Zhang Lixu
|
22f8bcec5a |
HID: intel-ish-hid: ipc: Add Nova Lake-H/S PCI device IDs
Add device IDs of Nova Lake-H and Nova Lake-S into ishtp support list. Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Alex Tran
|
b4f4fd947a |
selftests: hid: tests: test_wacom_generic: add tests for display devices and opaque devices
Verify Wacom devices set INPUT_PROP_DIRECT on display devices and INPUT_PROP_POINTER on opaque devices. Verify INPUT_PROP_POINTER is not set on display devices and INPUT_PROP_DIRECT is not set on opaque devices. Moved test_prop_pointer into TestOpaqueTablet. Created a DirectTabletTest mixin class for test_prop_direct that can be inherited by display tablet test classes.Used DirectTabletTest for TestDTH2452Tablet case. Signed-off-by: Alex Tran <alex.t.tran@gmail.com> Tested-by: Erin Skomra <erin.skomra@wacom.com> Reviewed-by: Erin Skomra <erin.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Ian Ray
|
a2e70a89fa |
HID: multitouch: new class MT_CLS_EGALAX_P80H84
Fixes:
|
||
|
Julius Lehmann
|
5f3518d774 |
HID: magicmouse: fix battery reporting for Apple Magic Trackpad 2
Battery reporting does not work for the Apple Magic Trackpad 2 if it is connected via USB. The current hid descriptor fixup code checks for a hid descriptor length of exactly 83 bytes. If the hid descriptor is larger, which is the case for newer apple mice, the fixup is not applied. This fix checks for hid descriptor sizes greater/equal 83 bytes which applies the fixup for newer devices as well. Signed-off-by: Julius Lehmann <lehmanju@devpi.de> Signed-off-by: Jiri Kosina <jkosina@suse.com> |
||
|
Tomasz Pakuła
|
97d5c8f5c0 |
HID: pidff: Fix condition effect bit clearing
As reported by MPDarkGuy on discord, NULL pointer dereferences were
happening because not all the conditional effects bits were cleared.
Properly clear all conditional effect bits from ffbit
Fixes:
|
||
|
Greg Kroah-Hartman
|
ecfa6f3449 |
HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them
In commit
|
||
|
Günther Noack
|
2bad24c177 |
HID: asus: avoid memory leak in asus_report_fixup()
The asus_report_fixup() function was returning a newly allocated kmemdup()-allocated buffer, but never freeing it. Switch to devm_kzalloc() to ensure the memory is managed and freed automatically when the device is removed. The caller of report_fixup() does not take ownership of the returned pointer, but it is permitted to return a pointer whose lifetime is at least that of the input buffer. Also fix a harmless out-of-bounds read by copying only the original descriptor size. Assisted-by: Gemini-CLI:Google Gemini 3 Signed-off-by: Günther Noack <gnoack@google.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> |
||
|
Günther Noack
|
91e8c6e601 |
HID: magicmouse: avoid memory leak in magicmouse_report_fixup()
The magicmouse_report_fixup() function was returning a newly kmemdup()-allocated buffer, but never freeing it. The caller of report_fixup() does not take ownership of the returned pointer, but it *is* permitted to return a sub-portion of the input rdesc, whose lifetime is managed by the caller. Assisted-by: Gemini-CLI:Google Gemini 3 Signed-off-by: Günther Noack <gnoack@google.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> |
||
|
Günther Noack
|
239c15116d |
HID: apple: avoid memory leak in apple_report_fixup()
The apple_report_fixup() function was returning a newly kmemdup()-allocated buffer, but never freeing it. The caller of report_fixup() does not take ownership of the returned pointer, but it *is* permitted to return a sub-portion of the input rdesc, whose lifetime is managed by the caller. Assisted-by: Gemini-CLI:Google Gemini 3 Signed-off-by: Günther Noack <gnoack@google.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> |
||
|
Günther Noack
|
6b3e458806 |
HID: Document memory allocation properties of report_fixup()
The memory pointer returned by the report_fixup() hook does not get freed by the caller. Instead, report_fixup() must return (in return value and *rsize) a memory buffer with at least the same lifetime as the input buffer (defined by rdesc and original *rsize). This is usually achieved using one of the following techniques: * Returning a pointer and size to a sub-portion of the input buffer * Returning a pointer to a static buffer * Allocating a buffer with a devm_*() function, which will automatically get freed when the device is removed. Signed-off-by: Günther Noack <gnoack@google.com> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> |
||
|
Linus Torvalds
|
f50822fd86 |
platform-drivers-x86 for v7.0-1
Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
amd/pmf:
- Added a module parameter to disable the Smart PC function
- Introduce new interface to export NPU metrics
- Prevent TEE errors after hibernate
- Use ring buffer to store custom BIOS input values
amd:
- Use scope-based cleanup for wbrf_record()
asus-wmi:
- add keyboard brightness event handler
- Add support for multiple kbd led handlers
- remove unused keyboard backlight quirk
crypto:
- ccp - Add an S4 restore flow
- ccp - Declare PSP dead if PSP_CMD_TEE_RING_INIT fails
- ccp - Factor out ring destroy handling to a helper
- ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails
HID: asus:
- add support for the asus-wmi brightness handler
- early return for ROG devices
- fortify keyboard handshake
- initialize additional endpoints only for certain devices
- listen to the asus-wmi brightness device instead of creating one
- move vendor initialization to probe
- simplify RGB init sequence
- use same report_id in response
hp-wmi:
- Add EC offsets to read Victus S thermal profile
- add manual fan control for Victus S models
- fix platform profile values for Omen 16-wf1xxx
- implement fan keep-alive
- order include headers
ideadpad-laptop:
- Clean up style warnings and checks
intel/pmc:
- Change LPM mode fields to u8
- Enable substate residencies for multiple PMCs
- Move LPM mode attributes to PMC
- Remove double empty line
intel/pmt:
- Replace sprintf() with sysfs_emit()
intel/uncore-freq:
- Replace sprintf() with scnprintf()
- Replace sprintf() with sysfs_emit()
intel-wmi-sbl-fw-update:
- Use new buffer-based WMI API
intel/wmi: thunderbolt:
- Use new buffer-based WMI API
ISST:
- Add missing write block check
- Check for admin capability for write commands
- Optimize suspend/resume callbacks
- Store and restore all domains data
lenovo-wmi-capdata:
- Add support for Capability Data 00
- Add support for Fan Test Data
lenovo-wmi-{capdata,other}:
- Fix HWMON channel visibility
- Support multiple Capability Data
lenovo-wmi-capdata:
- Wire up Fan Test Data
lenovo-wmi-helpers:
- Convert returned buffer into u32
lenovo-wmi-other:
- Add HWMON for fan reporting/tuning
mlx-platform:
- Add support DGX flavor of next-generation 800GB/s ethernet switch.
- Add support for new Nvidia DGX system based on class VMOD0010
Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata:
- Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata
surface: aggregator_registry:
- Add Surface Pro 11 (QCOM)
surface:
- Replace deprecated strcpy() in surface_button_add()
thinkpad_acpi:
- Add support to detect hardware damage detection capability.
- Add sysfs to display details of damaged device.
tools/power/x86/intel-speed-select:
- Allow non root users
- Fix file descriptor leak in isolate_cpus()
- Use pkg-config for libnl-3.0 detection
- v1.25 release
uniwill:
- Implement cTGP setting
uniwill-laptop:
- Introduce device descriptor system
wmi:
- Add helper functions for WMI string conversions
- Add kunit test for the marshalling code
- Add kunit test for the string conversion code
wmi-bmof:
- Use new buffer-based WMI API
wmi:
- Introduce marshalling support
wmi: string-kunit:
- Add missing oversized string test case
wmi:
- Update driver development guide
xiaomi-wmi:
- Use new buffer-based WMI API
yogabook:
- Clean up code style
Merges:
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
- Merge branch 'platform-drivers-x86-asus-kbd' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaY9soAAKCRBZrE9hU+XO
MT5EAP9aK1wHlVGDfuC2k07X4gk8ZX5Ks9anXJlBcZFrpC9okwD5Aeqj3XLK338x
g5k/x+r87GwXjcBLnFi2TnNA2c8SWQY=
=eGAm
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
|
||
|
Linus Torvalds
|
1b49e36325 |
* MTD
The ofpart parsing in physmap-core has been prioritized.
There has been a series of conversion to scoped for each OF child
loops.
* Bindings
The bulk of the changes consists in binding fixes/updates to restrict
the use of undefined properties, which was almost inefficient in the
current form because of the nesting of partition nodes and the lack of
compatible strings sometimes.
These changes are accompanied by YAML conversions and the addition of a
dma-coherent property in the cdns,hp-nfc driver.
* SPI NAND
The major feature this release is the support for octal DTR
modes (8D-8D-8D).
Support for Foresee F35SQB002G chips has been added.
Other changes are small misc fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmmPXI4ACgkQJWrqGEe9
VoQKJgf/YgI8L684Hq8OejCZYCoChZpTTvMmqmZ0CgRaZ157jcYTY5Od46pUpfEs
uSuoXW6+cuxdGeeUtyb3u5uJduO8r7UMjYLBqtMRGjvtfN9EDdhqVQWnRfCr9PoR
MS4moQa14tEakeP/u6stsmGLpzPkgiygcdTCWS4LhNoJ0LgkLjfBusQm6P5uqc+a
m/XS4Mg8SPj7pGjinu5KsvKWKiez6k4ExXiLM9p0TX/8iacFhGBrzKqv6zMiNyfL
p5ZS3ZLv9d79sLKOPlycfNO9LOp6O6ufn+zmuHQpTHGdlPegiNCoF1fOB9XZxc4A
iK9Z7b3ko9ta0HdjzRYkG/eFtTL0dQ==
=hnfP
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- prioritize ofpart in physmap-core probing
- conversions to scoped for each OF child loops
Bindings:
- The bulk of the changes consists of binding fixes/updates to
restrict the use of undefined properties, which was mostly
ineffective in the current form because of the nesting of partition
nodes and the lack of compatible strings
- YAML conversions and the addition of a dma-coherent property in the
cdns,hp-nfc driver
SPI NAND:
- support for octal DTR modes (8D-8D-8D)
- support for Foresee F35SQB002G chips
And small misc fixes"
* tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (65 commits)
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
mtd: rawnand: pl353: Add message about ECC mode
mtd: rawnand: pl353: Fix software ECC support
mtd: spinand: winbond: Remove unneeded semicolon
dt-bindings: mtd: cdns,hp-nfc: Add dma-coherent property
mtd: spinand: Disable continuous read during probe
mtd: spinand: add Foresee F35SQB002G flash support
mtd: spinand: winbond: W35N octal DTR support
mtd: spinand: Add octal DTR support
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
...
|
||
|
Linus Torvalds
|
72f05009d8 |
dma-mapping update for Linux 7.0
A small code cleanup for DMA-mapping subsystem: - removal of unused hooks (Robin Murphy) -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaY80tQAKCRCJp1EFxbsS RHQUAP9yrD7PczbUfOCcYoxvmyqYZ76gQLwnx9GB4Gi0pctxGAEA1hxsu+LisN5x uMc3XW/zluzQj/gn+jWCD5v5DzdEWA4= =uf46 -----END PGP SIGNATURE----- Merge tag 'dma-mapping-7.0-2026-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux Pull dma-mapping update from Marek Szyprowski: "A small code cleanup for the DMA-mapping subsystem: removal of unused hooks (Robin Murphy)" * tag 'dma-mapping-7.0-2026-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: dma-mapping: Remove dma_mark_clean (again) |
||
|
Linus Torvalds
|
44331bd6a6 |
Three MM hotfixes, all three are cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY9AJwAKCRDdBJ7gKXxA
jpzPAP4gTO3MHdBP/msNbdZCCQd2iXkdLlrdFsCpRyX/cC4BBwD/Vb50gfE9HkeX
5NYksxdTovqWDxivAcPLcWazHOEiGg0=
=bLY1
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-02-13-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"Three MM hotfixes, all three are cc:stable"
* tag 'mm-hotfixes-stable-2026-02-13-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
procfs: fix possible double mmput() in do_procmap_query()
mm/page_alloc: skip debug_check_no_{obj,locks}_freed with FPI_TRYLOCK
mm/hugetlb: restore failed global reservations to subpool
|
||
|
Linus Torvalds
|
a353e7260b |
virtio,vhost,vdpa: features, fixes
- in order support in virtio core - multiple address space support in vduse - fixes, cleanups all over the place, notably - dma alignment fixes for non cache coherent systems Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmmO9rYPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpBzYH/2wUPo3T8/CKGFjF7QSPzgL/UI2NhnP8iSm4 btg1zVnrWmJK6vVIwnf5UsG8dFKsMcp/BEGCewTmIddNM2wEeSul0kKDXtIzrK/U jdA9bJrUKLMeU7IFKne1Fip/yE+5nkWJttWXXyVRJtOJrYxZlkWfqSns3qYcPvsG g7HXvF6tmici5uoKdRCLqHtQCWsvpnvTD5A7qoZAlEUjlQCDKKmuukpN9oK5UYLl 9uUOgPQAJaxIwx1C4uP7L+AwbLUcN/+MtrvQRNz+sFpP3sN9oXeDJKBpNQp109NB JGk1sUsINL+54Cmdd5RwZ9T1vBJyRDrdWRDy1yHj95LildaPfh0= =pnob -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - in-order support in virtio core - multiple address space support in vduse - fixes, cleanups all over the place, notably dma alignment fixes for non-cache-coherent systems * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits) vduse: avoid adding implicit padding vhost: fix caching attributes of MMIO regions by setting them explicitly vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr() vdpa/mlx5: reuse common function for MAC address updates vdpa/mlx5: update mlx_features with driver state check crypto: virtio: Replace package id with numa node id crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req crypto: virtio: Add spinlock protection with virtqueue notification Documentation: Add documentation for VDUSE Address Space IDs vduse: bump version number vduse: add vq group asid support vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls vduse: take out allocations from vduse_dev_alloc_coherent vduse: remove unused vaddr parameter of vduse_domain_free_coherent vduse: refactor vdpa_dev_add for goto err handling vhost: forbid change vq groups ASID if DRIVER_OK is set vdpa: document set_group_asid thread safety vduse: return internal vq group struct as map token vduse: add vq group support vduse: add v1 API definition ... |
||
|
Linus Torvalds
|
cb5573868e |
Loongarch:
- Add more CPUCFG mask bits. - Improve feature detection. - Add lazy load support for FPU and binary translation (LBT) register state. - Fix return value for memory reads from and writes to in-kernel devices. - Add support for detecting preemption from within a guest. - Add KVM steal time test case to tools/selftests. ARM: - Add support for FEAT_IDST, allowing ID registers that are not implemented to be reported as a normal trap rather than as an UNDEF exception. - Add sanitisation of the VTCR_EL2 register, fixing a number of UXN/PXN/XN bugs in the process. - Full handling of RESx bits, instead of only RES0, and resulting in SCTLR_EL2 being added to the list of sanitised registers. - More pKVM fixes for features that are not supposed to be exposed to guests. - Make sure that MTE being disabled on the pKVM host doesn't give it the ability to attack the hypervisor. - Allow pKVM's host stage-2 mappings to use the Force Write Back version of the memory attributes by using the "pass-through' encoding. - Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the guest. - Preliminary work for guest GICv5 support. - A bunch of debugfs fixes, removing pointless custom iterators stored in guest data structures. - A small set of FPSIMD cleanups. - Selftest fixes addressing the incorrect alignment of page allocation. - Other assorted low-impact fixes and spelling fixes. RISC-V: - Fixes for issues discoverd by KVM API fuzzing in kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and kvm_riscv_vcpu_aia_imsic_update() - Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM - Transparent huge page support for hypervisor page tables - Adjust the number of available guest irq files based on MMIO register sizes found in the device tree or the ACPI tables - Add RISC-V specific paging modes to KVM selftests - Detect paging mode at runtime for selftests s390: - Performance improvement for vSIE (aka nested virtualization) - Completely new memory management. s390 was a special snowflake that enlisted help from the architecture's page table management to build hypervisor page tables, in particular enabling sharing the last level of page tables. This however was a lot of code (~3K lines) in order to support KVM, and also blocked several features. The biggest advantages is that the page size of userspace is completely independent of the page size used by the guest: userspace can mix normal pages, THPs and hugetlbfs as it sees fit, and in fact transparent hugepages were not possible before. It's also now possible to have nested guests and guests with huge pages running on the same host. - Maintainership change for s390 vfio-pci - Small quality of life improvement for protected guests x86: - Add support for giving the guest full ownership of PMU hardware (contexted switched around the fastpath run loop) and allowing direct access to data MSRs and PMCs (restricted by the vPMU model). KVM still intercepts access to control registers, e.g. to enforce event filtering and to prevent the guest from profiling sensitive host state. This is more accurate, since it has no risk of contention and thus dropped events, and also has significantly less overhead. For more information, see the commit message for merge commit |
||
|
Linus Torvalds
|
c87c79345e |
Just a very few minor things:
- two signal handling fixes - dynamic addition of virtio devices - and a single code cleanup -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmmPGUcACgkQ10qiO8sP aADBnw//cB1k60IYujqL7FffztGGIhoFLCEPt0UqMXZqrHY2aLytCuWXG4tqpMr4 o3wAtPs0tsXKR6Y6Yx9THgXWhWMGTBb6Teo8/CUb1i+YgtEvUoNx2XBgdjc64f+U ABrqEy4BkX1mLIqBL+RxqXY5BFN5RsBfZJiRMRlKO9ZOqC3dB/XRXjX2L9l5/5wt eASCgwdFQeo+T4cB9Zoi2Uxgm4IsX8M0uNO+zWLYMKgxy5yKAv9hvKXzxBTwBGtp R1CGWVBxc0Tfvgs1dVEyfJ2puZVoZetEQsm+uDzN26QVCPlLkAaIpQdFeTrws1XZ TTKBDpBeL8QsohnS2Da7sP8hG8S3n/PPP3/8su4euNDMgEwJHK3BG5sXGW1FMLHc 59bN+2ymUrHTMxbyxsHsDg78r5g+gK0V8RR3GSPPTnK7gKKXDL4Q/K6zAsx6KQGf CwGspD58kPnROWIyAHx7hBwcaEeNv/afSijZTNFPgir6AAJttOo+r+uMVRKZv/RP lRAtUPJLUvrJzKux6gQtVUvQgc9KR7Cm1+Gj9NgsGCr9YCif7MV5Ak4pG2t/9Ioy ZHaBsdNmFf5nIHyJy02ugAhaJNzQtc3bEDk6YN3O2m4oxD5YUV7SNapp51JWXfHp ncf3HxmhTb0ZFZRP1V6aPF9R7RGai5GKXVH8BuiLuFi9kh430q4= =xbfp -----END PGP SIGNATURE----- Merge tag 'uml-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML updates from Johannes Berg: "UML was _really_ quiet, with just four small commits: - two signal handling fixes - dynamic addition of virtio devices - a single code cleanup" * tag 'uml-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: arch/um: remove unused varible err in remove_files_and_dir() um: virtio_uml: Support adding devices via mconsole um: Handle SIGCHLD in seccomp mode like other IRQ signals um: Preserve errno within signal handler |
||
|
Thomas Weißschuh
|
b52343d1cb |
ARM: clean up the memset64() C wrapper
The current logic to split the 64-bit argument into its 32-bit halves is byte-order specific and a bit clunky. Use a union instead which is easier to read and works in all cases. GCC still generates the same machine code. While at it, rename the arguments of the __memset64() prototype to actually reflect their semantics. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Thomas Weißschuh
|
cd7a5651db |
alpha: add missing address argument in call to page_table_check_pte_clear()
After the merge of the alpha and mm trees, this code does not compile, as a parameter is missing in a call to page_table_check_pte_clear(). The parameter was re-added in commit |
||
|
Miquel Raynal
|
7e96d76c74 |
SPI NAND
- The major feature this release is the support for octal DTR modes (8D-8D-8D). - There has been as well a series of conversion to scoped for each OF child loops. - Support for Foresee F35SQB002G chips has been added. Other changes are small fixes. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmmPA08ACgkQJWrqGEe9 VoQlBQf/VecZcBAXdVoKBMOeWZbGugE5314boQJ0gvv7lvKKjq4YFijjfLVjZADw +TQdAUcPerlvJ04LsUMPAD+Hh169ejaHvYnEBDFqO7g/eKUEWob6NeD2b+4SKm+y Y/taa+w2YrSAuyn8wIiANB8WasbReqpQd0tq2OguNrCw6mTmAqLZwOCANH6FViDA AbR5y9JjVSGW9tyCqSuHvwvnz6e7hwzokOYpHzE56n6nqDWywAG65UiK6sN/pFME O2rCm8V3laa3mdYkr8Rgy9Ee1sI+erD1TKWqwTGfNQly1vU4j7b3hHjjxAfr2JHr kXWjG2tAJTrDcqI9D+Re93p+G2QF3g== =8YHZ -----END PGP SIGNATURE----- Merge tag 'nand/for-7.0' into mtd/next SPI NAND - The major feature this release is the support for octal DTR modes (8D-8D-8D). - There has been as well a series of conversion to scoped for each OF child loops. - Support for Foresee F35SQB002G chips has been added. Other changes are small fixes. |
||
|
Linus Torvalds
|
cee73b1e84 |
RISC-V updates for v7.0
- Add support for control flow integrity for userspace processes. This is based on the standard RISC-V ISA extensions Zicfiss and Zicfilp - Improve ptrace behavior regarding vector registers, and add some selftests - Optimize our strlen() assembly - Enable the ISO-8859-1 code page as built-in, similar to ARM64, for EFI volume mounting - Clean up some code slightly, including defining copy_user_page() as copy_page() rather than memcpy(), aligning us with other architectures; and using max3() to slightly simplify an expression in riscv_iommu_init_check() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAmmOYpYACgkQx4+xDQu9 KkvzOQ/9Fq8ZxWgYofhTPtw9/vps3avheOHlEoRrBWYfn1VkTRPAcbUULL4PGXwg dnVFEl3AcrpOFikIthbukklLeLoOnUshZJBU25zY5h0My1jb63V1//gEwJR6I0dg +V+GJmfzc4+YVaHK6UFdn7j3GgKUbTC7xXRMuGEriAzKPnm3AXAjh94wMNx6depv Li3IXRoZT/HvqIAyfeAoM9STwOzJtE3Sc6fXABkzsIbNTjjdgIqoRSsQsKY10178 z6ox/sVStnLmVaMbOd/ZVN0J70JRDsvK0TC0/13K1ESUbnVia9a3bPIxLRmSapKC wXnwAuSeevtFshGGyd5LZO0QQGxzG1H63Gky2GRoh8bTQbd2tQcfQzANdnPkBAQS j2aOiSsiUQeNZqfZAfEBwRd27GXRYlKb/MpgCZKUH+ZO9VG6QaD3VGvg17/Caghy nVdbBQ81ZV9tkz9EMN0vt2VJHmEqARh88w619laHjg+ioPTG4/UIDPzskt1I+Fgm Y6NQLeFyfaO3RKKDYWGPcY7fmWQI9V8MECHOvyVI4xJcgqAbqnfsgytjuiFbrfRo fTvpuB7kvltBZ180QSB79xj0sWGFTWR02MeWy3uOaLZz2eIm2ZTZbMUSgNYR0ldG L3y7CEkTkoVF1ijYgAfuMgptk3Yf0dpa66D9HUo947wWkNrW5ds= =4fTk -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Paul Walmsley: - Add support for control flow integrity for userspace processes. This is based on the standard RISC-V ISA extensions Zicfiss and Zicfilp - Improve ptrace behavior regarding vector registers, and add some selftests - Optimize our strlen() assembly - Enable the ISO-8859-1 code page as built-in, similar to ARM64, for EFI volume mounting - Clean up some code slightly, including defining copy_user_page() as copy_page() rather than memcpy(), aligning us with other architectures; and using max3() to slightly simplify an expression in riscv_iommu_init_check() * tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits) riscv: lib: optimize strlen loop efficiency selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function selftests: riscv: verify ptrace accepts valid vector csr values selftests: riscv: verify ptrace rejects invalid vector csr inputs selftests: riscv: verify syscalls discard vector context selftests: riscv: verify initial vector state with ptrace selftests: riscv: test ptrace vector interface riscv: ptrace: validate input vector csr registers riscv: csr: define vtype register elements riscv: vector: init vector context with proper vlenb riscv: ptrace: return ENODATA for inactive vector extension kselftest/riscv: add kselftest for user mode CFI riscv: add documentation for shadow stack riscv: add documentation for landing pad / indirect branch tracking riscv: create a Kconfig fragment for shadow stack and landing pad support arch/riscv: add dual vdso creation logic and select vdso based on hw arch/riscv: compile vdso with landing pad and shadow stack note riscv: enable kernel access to shadow stack memory via the FWFT SBI call riscv: add kernel command line option to opt out of user CFI riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe ... |
||
|
Linus Torvalds
|
7563f7e0e9 |
power supply and reset changes for the 7.0 series
* power-supply core
- sysfs: Constify pointer passed to dev_attr_psp
- extend DT binding documentation for battery cells to allow
describing voltage drop behaviour
* power-supply drivers
- multiple: Remove unused gpio include header
- multiple: Fix potential IRQ use-after-free on driver unload
- bd71828: Add support for ROHM BD72720
- misc. small fixes
* reset drivers
- tdx-ec-poweroff: fix restart
-----BEGIN PGP SIGNATURE-----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=HkTZ
-----END PGP SIGNATURE-----
Merge tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"power-supply core:
- sysfs: constify pointer passed to dev_attr_psp
- extend DT binding documentation for battery cells to allow
describing voltage drop behaviour
power-supply drivers:
- multiple: Remove unused gpio include header
- multiple: Fix potential IRQ use-after-free on driver unload
- bd71828: Add support for ROHM BD72720
- misc small fixes
reset drivers:
- tdx-ec-poweroff: fix restart"
* tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bd71828: Use dev_err_probe()
dt-bindings: power: supply: google,goldfish-battery: Convert to DT schema
power: supply: qcom_battmgr: Recognize "LiP" as lithium-polymer
power: supply: wm97xx: Use devm_power_supply_register()
power: supply: wm97xx: Use devm_kcalloc()
power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler
power: reset: tdx-ec-poweroff: fix restart
docs: power: update documentation about removed function
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
MAINTAINERS: adjust file entry in ROHM BD71828 CHARGER
power: supply: ab8500_chargalg: improve kernel-doc
power: supply: sysfs: Constify pointer passed to dev_attr_psp()
power: supply: bq27xxx: fix wrong errno when bus ops are unsupported
power: reset: nvmem-reboot-mode: respect cell size for nvmem_cell_write
power: supply: sbs-battery: Fix use-after-free in power_supply_changed()
power: supply: rt9455: Fix use-after-free in power_supply_changed()
power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed()
power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed()
power: supply: pf1550: Fix use-after-free in power_supply_changed()
power: supply: goldfish: Fix use-after-free in power_supply_changed()
...
|
||
|
Linus Torvalds
|
7449f86baf |
NFS Client Updates for Linux 7.0
New Features:
* Use an LRU list for returning unused delegations
* Introduce a KConfig option to disable NFS v4.0 and make NFS v4.1 the default
Bugfixes:
* NFS/localio: Handle short writes by retrying
* NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages
* NFS/localio: use GFP_NOIO and non-memreclaim workqueue in nfs_local_commit
* NFS/localio: remove -EAGAIN handling in nfs_local_doio()
* pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
* fs/nfs: Fix a readdir slow-start regression
* SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Other Cleanups and Improvements:
* A few other NFS/localio cleanups
* Various other delegation handling cleanups from Christoph
* Unify security_inode_listsecurity() calls
* Improvements to NFSv4 lease handling
* Clean up SUNRPC *_debug fields when CONFIG_SUNRPC_DEBUG is not set
-----BEGIN PGP SIGNATURE-----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=CwZq
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-7.0-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Use an LRU list for returning unused delegations
- Introduce a KConfig option to disable NFS v4.0 and make NFS v4.1
the default
Bugfixes:
- NFS/localio:
- Handle short writes by retrying
- Prevent direct reclaim recursion into NFS via nfs_writepages
- Use GFP_NOIO and non-memreclaim workqueue in nfs_local_commit
- Remove -EAGAIN handling in nfs_local_doio()
- pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
- fs/nfs: Fix a readdir slow-start regression
- SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Other cleanups and improvements:
- A few other NFS/localio cleanups
- Various other delegation handling cleanups from Christoph
- Unify security_inode_listsecurity() calls
- Improvements to NFSv4 lease handling
- Clean up SUNRPC *_debug fields when CONFIG_SUNRPC_DEBUG is not set"
* tag 'nfs-for-7.0-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (60 commits)
SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
nfs: nfs4proc: Convert comma to semicolon
SUNRPC: Change list definition method
sunrpc: rpc_debug and others are defined even if CONFIG_SUNRPC_DEBUG unset
NFSv4: limit lease period in nfs4_set_lease_period()
NFSv4: pass lease period in seconds to nfs4_set_lease_period()
nfs: unify security_inode_listsecurity() calls
fs/nfs: Fix readdir slow-start regression
pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
NFS: fix delayed delegation return handling
NFS: simplify error handling in nfs_end_delegation_return
NFS: fold nfs_abort_delegation_return into nfs_end_delegation_return
NFS: remove the delegation == NULL check in nfs_end_delegation_return
NFS: use bool for the issync argument to nfs_end_delegation_return
NFS: return void from ->return_delegation
NFS: return void from nfs4_inode_make_writeable
NFS: Merge CONFIG_NFS_V4_1 with CONFIG_NFS_V4
NFS: Add a way to disable NFS v4.0 via KConfig
NFS: Move sequence slot operations into minorversion operations
NFS: Pass a struct nfs_client to nfs4_init_sequence()
...
|
||
|
Linus Torvalds
|
8429538c2c |
tools/testing: keep legacy generated files around in .gitignore file
People keep removing generated files from .gitignore files even when the
files stay around. Please don't do that: just because the file is no
longer being generated doesn't make it magically go away, and doesn't
make it suddenly be something that should now not be ignored any more.
Fixes:
|
||
|
Linus Torvalds
|
2c75a8d92c |
ATA changes for 6.20
- Cleanup IRQ masking in the handling of completed report zones
commands (Niklas).
- Improve the handling of Thunderbolt attached devices to speed up
device removal (Henry).
- Several patches to generalize the existing max_sec quirks to
facilitates quirking the maximum command size of buggy drives, many
of which have recently showed up with the recent increase of the
default max_sectors block limit (Niklas).
- Cleanup the ahci-platform and sata dt-bindings schema (Rob,
Manivannan).
- Improve device node scan in the ahci-dwc driver (Krzysztof).
- Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers
(Krzysztof).
- Fix a long standing potential command starvation situation with
non-NCQ commands issued when NCQ commands are on-going (me).
- Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas).
- Remove Vesa Local Bus (VLB) support in the pata_legacy driver
(Ethan).
- Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing)
drivers (Ethan, Linus W.)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCaY5uKwAKCRDdoc3SxdoY
dvn1AQCyhAHcegeAuQLL9L6pTdtKmObR0AOeeTkqOvGOWdb4agD+OVCeivi7KPBL
zwzaJ5BhvwOS8FTiZzd+KHVpAQ0LtQk=
=HvkS
-----END PGP SIGNATURE-----
Merge tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ATA updates from Damien Le Moal:
- Cleanup IRQ masking in the handling of completed report zones
commands (Niklas)
- Improve the handling of Thunderbolt attached devices to speed up
device removal (Henry)
- Several patches to generalize the existing max_sec quirks to
facilitates quirking the maximum command size of buggy drives, many
of which have recently showed up with the recent increase of the
default max_sectors block limit (Niklas)
- Cleanup the ahci-platform and sata dt-bindings schema (Rob,
Manivannan)
- Improve device node scan in the ahci-dwc driver (Krzysztof)
- Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers
(Krzysztof)
- Fix a long standing potential command starvation situation with
non-NCQ commands issued when NCQ commands are on-going (me)
- Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas)
- Remove Vesa Local Bus (VLB) support in the pata_legacy driver (Ethan)
- Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing)
drivers (Ethan, Linus W)
* tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_ftide010: Fix some DMA timings
ata: pata_cypress: fix typo in error message
ata: pata_legacy: remove VLB support
ata: libata-core: Quirk INTEL SSDSC2KG480G8 max_sectors
dt-bindings: ata: sata: Document the graph port
ata: libata-scsi: avoid Non-NCQ command starvation
ata: libata-scsi: refactor ata_scsi_translate()
ata: ahci-xgene: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-imx: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-dwc: Simplify with scoped for each OF child loop
dt-bindings: ata: ahci-platform: Drop unnecessary select schema
ata: libata: Allow more quirks
ata: libata: Add libata.force parameter max_sec
ata: libata: Add support to parse equal sign in libata.force
ata: libata: Change libata.force to use the generic ATA_QUIRK_MAX_SEC quirk
ata: libata: Add ata_force_get_fe_for_dev() helper
ata: libata: Add ATA_QUIRK_MAX_SEC and convert all device quirks
ata: libata: avoid long timeouts on hot-unplugged SATA DAS
ata: libata-scsi: Remove superfluous local_irq_save()
|
||
|
Linus Torvalds
|
311aa68319 |
RDMA v7.0 merge window
Usual smallish cycle:
- Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe
- Small driver improvements and minor bug fixes to hns, mlx5, rxe, mana,
mlx5, irdma
- Robusness improvements in completion processing for EFA
- New query_port_speed() verb to move past limited IBA defined speed steps
- Support for SG_GAPS in rts and many other small improvements
- Rare list corruption fix in iwcm
- Better support different page sizes in rxe
- Device memory support for mana
- Direct bio vec to kernel MR for use by NFS-RDMA
- QP rate limiting for bnxt_re
- Remote triggerable NULL pointer crash in siw
- DMA-buf exporter support for RDMA mmaps like doorbells
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaY44vgAKCRCFwuHvBreF
YfiZAP91cMZfogN7r1FMD75xDZu55dI3Jvy8OaixyRxlWLGPcQEAjritdL0o7fZp
YrD1OXNS/1XG//rPBVw7xj+54Aa8hAU=
=AVcu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual smallish cycle. The NFS biovec work to push it down into RDMA
instead of indirecting through a scatterlist is pretty nice to see,
been talked about for a long time now.
- Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe
- Small driver improvements and minor bug fixes to hns, mlx5, rxe,
mana, mlx5, irdma
- Robusness improvements in completion processing for EFA
- New query_port_speed() verb to move past limited IBA defined speed
steps
- Support for SG_GAPS in rts and many other small improvements
- Rare list corruption fix in iwcm
- Better support different page sizes in rxe
- Device memory support for mana
- Direct bio vec to kernel MR for use by NFS-RDMA
- QP rate limiting for bnxt_re
- Remote triggerable NULL pointer crash in siw
- DMA-buf exporter support for RDMA mmaps like doorbells"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/mlx5: Implement DMABUF export ops
RDMA/uverbs: Add DMABUF object type and operations
RDMA/uverbs: Support external FD uobjects
RDMA/siw: Fix potential NULL pointer dereference in header processing
RDMA/umad: Reject negative data_len in ib_umad_write
IB/core: Extend rate limit support for RC QPs
RDMA/mlx5: Support rate limit only for Raw Packet QP
RDMA/bnxt_re: Report QP rate limit in debugfs
RDMA/bnxt_re: Report packet pacing capabilities when querying device
RDMA/bnxt_re: Add support for QP rate limiting
MAINTAINERS: Drop RDMA files from Hyper-V section
RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc
svcrdma: use bvec-based RDMA read/write API
RDMA/core: add rdma_rw_max_sge() helper for SQ sizing
RDMA/core: add MR support for bvec-based RDMA operations
RDMA/core: use IOVA-based DMA mapping for bvec RDMA operations
RDMA/core: add bio_vec based RDMA read/write API
RDMA/irdma: Use kvzalloc for paged memory DMA address array
RDMA/rxe: Fix race condition in QP timer handlers
RDMA/mana_ib: Add device‑memory support
...
|
||
|
Linus Torvalds
|
e812928be2 |
cxl changes for v7.0
- A set of commits that introduces cxl_memdev_attach and pave way for soft reserved handling, type2 accelerator enabling, and LSA 2.0 enabling. All these series require the endpoint driver to settle before continuing the memdev driver probe. dax/hmem, e820, resource: Defer Soft Reserved insertion until hmem is ready cxl/mem: Introduce cxl_memdev_attach for CXL-dependent operation cxl/mem: Drop @host argument to devm_cxl_add_memdev() cxl/mem: Convert devm_cxl_add_memdev() to scope-based-cleanup cxl/port: Arrange for always synchronous endpoint attach cxl/mem: Arrange for always-synchronous memdev attach cxl/mem: Fix devm_cxl_memdev_edac_release() confusion - A set to address CXL port error protocol handling and reporting. The large patch series was split into 3 parts. Part 1 and 2 are included here with part 3 coming later. Part 1 consists of a series of code refactoring to PCI AER sub-system that addresses CXL and also CXL RAS code to prepare for port error handling. Part 2 refactors the CXL code to move management of component registers to cxl_port objects to allow all CXL AER errors to be handled through the cxl_port hierarchy. Part 2: cxl/port: Move endpoint component register management to cxl_port cxl/port: Map Port RAS registers cxl/port: Move dport RAS setup to dport add time cxl/port: Move dport probe operations to a driver event cxl/port: Move decoder setup before dport creation cxl/port: Cleanup dport removal with a devres group cxl/port: Reduce number of @dport variables in cxl_port_add_dport() cxl/port: Cleanup handling of the nr_dports 0 -> 1 transition Part 1: cxl: Update RAS handler interfaces to also support CXL Ports cxl/mem: Clarify @host for devm_cxl_add_nvdimm() PCI/AER: Update struct aer_err_info with kernel-doc formatting PCI/AER: Report CXL or PCIe bus type in AER trace logging PCI/AER: Use guard() in cxl_rch_handle_error_iter() PCI/AER: Move CXL RCH error handling to aer_cxl_rch.c PCI/AER: Update is_internal_error() to be non-static is_aer_internal_error() PCI/AER: Export pci_aer_unmask_internal_errors() cxl/pci: Move CXL driver's RCH error handling into core/ras_rch.c PCI/AER: Replace PCIEAER_CXL symbol with CXL_RAS cxl/pci: Remove CXL VH handling in CONFIG_PCIEAER_CXL conditional blocks from core/pci.c PCI: Replace cxl_error_is_native() with pcie_aer_is_native() cxl/pci: Remove unnecessary CXL RCH handling helper functions cxl/pci: Remove unnecessary CXL Endpoint handling helper functions PCI: Introduce pcie_is_cxl() PCI: Update CXL DVSEC definitions PCI: Move CXL DVSEC definitions into uapi/linux/pci_regs.h - A set of patches to provide AMD Zen5 platform address translation for CXL using ACPI PRMT. Set includes a conventions document to explain why this is needed and how it's implemented. cxl: Disable HPA/SPA translation handlers for Normalized Addressing cxl/region: Factor out code into cxl_region_setup_poison() cxl/atl: Lock decoders that need address translation cxl: Enable AMD Zen5 address translation using ACPI PRMT cxl/acpi: Prepare use of EFI runtime services cxl: Introduce callback for HPA address ranges translation cxl/region: Use region data to get the root decoder cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos() cxl/region: Separate region parameter setup and region construction cxl: Simplify cxl_root_ops allocation and handling cxl/region: Store HPA range in struct cxl_region cxl/region: Store root decoder in struct cxl_region cxl/region: Rename misleading variable name @hpa to @hpa_range Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement cxl, doc: Moving conventions in separate files cxl, doc: Remove isonum.txt inclusion - A set of misc CXL patches of fixes, cleanups, and updates. Including CXL address translation for unaligned MOD3 regions. cxl: Fix premature commit_end increment on decoder commit failure cxl/region: Use do_div() for 64-bit modulo operation cxl/region: Translate HPA to DPA and memdev in unaligned regions cxl/region: Translate DPA->HPA in unaligned MOD3 regions cxl/core: Fix cxl_dport debugfs EINJ entries cxl/acpi: Remove cxl_acpi_set_cache_size() cxl/hdm: Fix newline character in dev_err() messages cxl/pci: Remove outdated FIXME comment and BUILD_BUG_ON Documentation/driver-api/cxl: device hotplug section Documentation/driver-api/cxl: BIOS/EFI expectation update -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5DAy15EJMCV1R6v9YGjFFmlTOEoFAmmOFXcACgkQYGjFFmlT OEojaxAApQJFLyX1MkPbhtm6j6GRzzEAEWTBX2XsmliZf1JhfahsNMWI69kO33rm LddF+nyZNEl/foyHgUaxVzlQwqWuihyp7Qk2djXnMzLsuCAsWhPbB9j0RgJUN8h5 N4U76AmOdmhLlXH4CCqoW2jNy0OjxNdgp1FtTHv7VO7RxgRE9MFJRkLulKxB03wy t6lRZXPofEFcHen40DlYRtW26vy1BYUO0dng2f16DxWrb1ztdACH/zVqCJJtdoFc FAT5EaQCeRYZ9Yz4dONw3DcUjYlG6NcRN9FWNiptBn1Pb7pUX55Le8lfD3qZg0an m3lWRs1T/lGz7pWmz4GPUKDwGFCEqLqd4oSz5v+dFR3JJxjJpRzKa19y5TfqK/LF diqNZsDD9gCXE1HXzNr1YcbllpU2cPRPf58gWG9bLmG5xUUmScib8LoTMfgcCJW5 SlC6kf7BFLkJfDTcFaILc/UANeZaLGhrV0vyJntfGyT5EqKOcfjQEvrZvofA8mef bdxt0IRDW4D+7kkcuR33OipTVUFG3ban8yYq4zXD64dmeHF76gwdJm3nyXsqdtpc IYIIhz0W6pbTKjJ2fy1rZcTac1ZaALstyaF4bYWIjyF3NylPM8tDi48DFr+DGgeX xkFs2B9p5vY5Cq73gCmSWsi3PBPTjWzeRp7YZrV6VoBd9uqewUs= =blFQ -----END PGP SIGNATURE----- Merge tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL updates from Dave Jiang: - Introduce cxl_memdev_attach and pave way for soft reserved handling, type2 accelerator enabling, and LSA 2.0 enabling. All these series require the endpoint driver to settle before continuing the memdev driver probe. - Address CXL port error protocol handling and reporting. The large patch series was split into three parts. The first two parts are included here with the final part coming later. The first part consists of a series of code refactoring to PCI AER sub-system that addresses CXL and also CXL RAS code to prepare for port error handling. The second part refactors the CXL code to move management of component registers to cxl_port objects to allow all CXL AER errors to be handled through the cxl_port hierarchy. - Provide AMD Zen5 platform address translation for CXL using ACPI PRMT. This includes a conventions document to explain why this is needed and how it's implemented. - Misc CXL patches of fixes, cleanups, and updates. Including CXL address translation for unaligned MOD3 regions. [ TLA service: CXL is "Compute Express Link" ] * tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (59 commits) cxl: Disable HPA/SPA translation handlers for Normalized Addressing cxl/region: Factor out code into cxl_region_setup_poison() cxl/atl: Lock decoders that need address translation cxl: Enable AMD Zen5 address translation using ACPI PRMT cxl/acpi: Prepare use of EFI runtime services cxl: Introduce callback for HPA address ranges translation cxl/region: Use region data to get the root decoder cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos() cxl/region: Separate region parameter setup and region construction cxl: Simplify cxl_root_ops allocation and handling cxl/region: Store HPA range in struct cxl_region cxl/region: Store root decoder in struct cxl_region cxl/region: Rename misleading variable name @hpa to @hpa_range Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement cxl, doc: Moving conventions in separate files cxl, doc: Remove isonum.txt inclusion cxl/port: Unify endpoint and switch port lookup cxl/port: Move endpoint component register management to cxl_port cxl/port: Map Port RAS registers cxl/port: Move dport RAS setup to dport add time ... |
||
|
Linus Torvalds
|
cebcffe666 |
VFIO updates for v7.0-rc1
- Update outdated mdev comment referencing the renamed
mdev_type_add() function. (Julia Lawall)
- Introduce selftest support for IOMMU mapping of PCI MMIO BARs.
(Alex Mastro)
- Relax selftest assertion relative to differences in huge page
handling between legacy (v1) TYPE1 IOMMU mapping behavior and
the compatibility mode supported by IOMMUFD. (David Matlack)
- Reintroduce memory poison handling support for non-struct-page-
backed memory in the nvgrace-gpu variant driver. (Ankit Agrawal)
- Replace dma_buf_phys_vec with phys_vec to avoid duplicate
structure and semantics. (Leon Romanovsky)
- Add missing upstream bridge locking across PCI function reset,
resolving an assertion failure when secondary bus reset is used
to provide that reset. (Anthony Pighin)
- Fixes to hisi_acc vfio-pci variant driver to resolve corner case
issues related to resets, repeated migration, and error injection
scenarios. (Longfang Liu, Weili Qian)
- Restrict vfio selftest builds to arm64 and x86_64, resolving
compiler warnings on 32-bit archs. (Ted Logan)
- Un-deprecate the fsl-mc vfio bus driver as a new maintainer has
stepped up. (Ioana Ciornei)
-----BEGIN PGP SIGNATURE-----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=F+FV
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
"A small cycle with the bulk in selftests and reintroducing poison
handling in the nvgrace-gpu driver. The rest are fixes, cleanups, and
some dmabuf structure consolidation.
- Update outdated mdev comment referencing the renamed
mdev_type_add() function (Julia Lawall)
- Introduce selftest support for IOMMU mapping of PCI MMIO BARs (Alex
Mastro)
- Relax selftest assertion relative to differences in huge page
handling between legacy (v1) TYPE1 IOMMU mapping behavior and the
compatibility mode supported by IOMMUFD (David Matlack)
- Reintroduce memory poison handling support for non-struct-page-
backed memory in the nvgrace-gpu variant driver (Ankit Agrawal)
- Replace dma_buf_phys_vec with phys_vec to avoid duplicate structure
and semantics (Leon Romanovsky)
- Add missing upstream bridge locking across PCI function reset,
resolving an assertion failure when secondary bus reset is used to
provide that reset (Anthony Pighin)
- Fixes to hisi_acc vfio-pci variant driver to resolve corner case
issues related to resets, repeated migration, and error injection
scenarios (Longfang Liu, Weili Qian)
- Restrict vfio selftest builds to arm64 and x86_64, resolving
compiler warnings on 32-bit archs (Ted Logan)
- Un-deprecate the fsl-mc vfio bus driver as a new maintainer has
stepped up (Ioana Ciornei)"
* tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfio:
vfio/fsl-mc: add myself as maintainer
vfio: selftests: only build tests on arm64 and x86_64
hisi_acc_vfio_pci: fix the queue parameter anomaly issue
hisi_acc_vfio_pci: resolve duplicate migration states
hisi_acc_vfio_pci: update status after RAS error
hisi_acc_vfio_pci: fix VF reset timeout issue
vfio/pci: Lock upstream bridge for vfio_pci_core_disable()
types: reuse common phys_vec type instead of DMABUF open‑coded variant
vfio/nvgrace-gpu: register device memory for poison handling
mm: add stubs for PFNMAP memory failure registration functions
vfio: selftests: Drop IOMMU mapping size assertions for VFIO_TYPE1_IOMMU
vfio: selftests: Add vfio_dma_mapping_mmio_test
vfio: selftests: Align BAR mmaps for efficient IOMMU mapping
vfio: selftests: Centralize IOMMU mode name definitions
vfio/mdev: update outdated comment
|
||
|
Linus Torvalds
|
d4a379a52c |
SCSI misc on 20260212
Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted cleanups and fixes. The biggest core change is the massive code motion in the sd driver to remove forward declarations and the most significant change is to enumify the queuecommand return. Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaY4ljBsUgAAAAAAEAA5t YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy c2hpcC5jb20ACgkQ50LJTO6YrIWFlwEAr9nc1ntxH4UNPgFCVjKyAOa5IE+p5o5C 2lwQIufcihEBAORvI9KO6AoEK6v9TmMKZXoyVsDRFe79fQE5NwCjfAA3 =My8f -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted cleanups and fixes. The biggest core change is the massive code motion in the sd driver to remove forward declarations and the most significant change is to enumify the queuecommand return" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits) scsi: csiostor: Fix dereference of null pointer rn scsi: buslogic: Reduce stack usage scsi: ufs: host: mediatek: Require CONFIG_PM scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event scsi: smartpqi: Fix memory leak in pqi_report_phys_luns() scsi: mpi3mr: Make driver probing asynchronous scsi: ufs: core: Flush exception handling work when RPM level is zero scsi: efct: Use IRQF_ONESHOT and default primary handler scsi: ufs: core: Use a host-wide tagset in SDB mode scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users scsi: mpi3mr: Driver version update to 8.17.0.3.50 scsi: mpi3mr: Fixed the W=1 compilation warning scsi: mpi3mr: Record and report controller firmware faults scsi: mpi3mr: Update MPI Headers to revision 39 scsi: mpi3mr: Use negotiated link rate from DevicePage0 scsi: mpi3mr: Avoid redundant diag-fault resets scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context scsi: mpi3mr: Add module parameter to control threaded IRQ polling ... |
||
|
Andrii Nakryiko
|
61dc9f7767 |
procfs: fix possible double mmput() in do_procmap_query()
When user provides incorrectly sized buffer for build ID for PROCMAP_QUERY
we return with -ENAMETOOLONG error. After recent changes this condition
happens later, after we unlocked mmap_lock/per-VMA lock and did mmput(),
so original goto out is now wrong and will double-mmput() mm_struct. Fix
by jumping further to clean up only vm_file and name_buf.
Link: https://lkml.kernel.org/r/20260210192738.3041609-1-andrii@kernel.org
Fixes:
|
||
|
Harry Yoo
|
338ad1e84d |
mm/page_alloc: skip debug_check_no_{obj,locks}_freed with FPI_TRYLOCK
When CONFIG_DEBUG_OBJECTS_FREE is enabled,
debug_check_no_{obj,locks}_freed() functions are called.
Since both of them spin on a lock, they are not safe to be called if the
FPI_TRYLOCK flag is specified. This leads to a lockdep splat:
================================
WARNING: inconsistent lock state
6.19.0-rc5-slab-for-next+ #326 Tainted: G N
--------------------------------
inconsistent {INITIAL USE} -> {IN-NMI} usage.
kunit_try_catch/9046 [HC2[2]:SC0[0]:HE0:SE1] takes:
ffffffff84ed6bf8 (&obj_hash[i].lock){-.-.}-{2:2}, at: __debug_check_no_obj_freed+0xe0/0x300
{INITIAL USE} state was registered at:
lock_acquire+0xd9/0x2f0
_raw_spin_lock_irqsave+0x4c/0x80
__debug_object_init+0x9d/0x1f0
debug_object_init+0x34/0x50
__init_work+0x28/0x40
init_cgroup_housekeeping+0x151/0x210
init_cgroup_root+0x3d/0x140
cgroup_init_early+0x30/0x240
start_kernel+0x3e/0xcd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xf3/0x140
common_startup_64+0x13e/0x148
irq event stamp: 2998
hardirqs last enabled at (2997): [<ffffffff8298b77a>] exc_nmi+0x11a/0x240
hardirqs last disabled at (2998): [<ffffffff8298b991>] sysvec_irq_work+0x11/0x110
softirqs last enabled at (1416): [<ffffffff813c1f72>] __irq_exit_rcu+0x132/0x1c0
softirqs last disabled at (1303): [<ffffffff813c1f72>] __irq_exit_rcu+0x132/0x1c0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&obj_hash[i].lock);
<Interrupt>
lock(&obj_hash[i].lock);
*** DEADLOCK ***
Rename free_pages_prepare() to __free_pages_prepare(), add an fpi_t
parameter, and skip those checks if FPI_TRYLOCK is set. To keep the fpi_t
definition in mm/page_alloc.c, add a wrapper function free_pages_prepare()
that always passes FPI_NONE and use it in mm/compaction.c.
Link: https://lkml.kernel.org/r/20260209062639.16577-1-harry.yoo@oracle.com
Fixes:
|
||
|
Joshua Hahn
|
1d3f9bb4c8 |
mm/hugetlb: restore failed global reservations to subpool
Commit |
||
|
Linus Torvalds
|
041c16acba |
for-7.0/io_uring-zcrx-large-buffers-20260206
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmmGJ4AQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpnL0D/9rEC0FGoGM3473v2SUPEkcpSIIab3KMZl5 YW/GcPeE8i/jMTfa/QJjTpp24ke1m+AuMYmEUm+KDHNXNQTjJQVnSFRPxER5dLJl goarFuk5JVDdzovL8QZuYGQHY3o1G54QLuBpVypBBqZdOQFTk8UwOdLFk4JrHMM2 PkUBUf9lZq9KiH6jdwn3v4qpZsZq93IubZ2dSncDcuZ3l2FbiZG88C3pp7wd+w1Z VM+xTLkqS3OhXiLVfbmRVM//3PgQZU4bO6k+vjWhlztC+5+ELcuiPyN6nd++6lLw LHH55T/xzko+TVc7kW7NTZ79MjBrjFKSNq4M/LV5SXSEpUAlqMoEakXVupVrBv+Z gheHHHas3t8FWKwIkjEH6iV1TyGOxZzxaiQ8MurzQ5v3FC2PdfH+Uqisf56LTNKY yAI0Ka8JWBv0sImgGB5J5ZzMP+xPxp4oyLEqKGLkUSi2OGtOeSHXwEiNbbJuTJBQ Q+xGdTXukG+zlMnTIcq0fGFaT0hXYs8a6ZiF7vyaYdW9R6/WdfDlS/YN+gM+JgrD EH2k29NE4kZi6cPFayfmgnfh10leiyMYt020b0GR4VpCHtthz7k+oasLB400qGrs X6wad+Y1YfdEpD1SW447ZrM8JmcOVrLCj/yIodyV30Kw0v3QSjKLcp2LoxwvPpRi Crs4Sb74Lg== =d42R -----END PGP SIGNATURE----- Merge tag 'for-7.0/io_uring-zcrx-large-buffers-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux Pull io_uring large rx buffer support from Jens Axboe: "Now that the networking updates are upstream, here's the support for large buffers for zcrx. Using larger (bigger than 4K) rx buffers can increase the effiency of zcrx. For example, it's been shown that using 32K buffers can decrease CPU usage by ~30% compared to 4K buffers" * tag 'for-7.0/io_uring-zcrx-large-buffers-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring/zcrx: implement large rx buffer support |
||
|
Linus Torvalds
|
e99785a923 |
Updates for the 7.0 release
* nvdimm: virtio_pmem: serialize flush requests * drivers/nvdimm: Use local kmaps -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQSgX9xt+GwmrJEQ+euebuN7TNx1MQUCaYzqOxQcaXJhLndlaW55 QGludGVsLmNvbQAKCRCebuN7TNx1MWQwAQC+5Eo6DEFRltrAv2IiVl7Gab+eR++W J16PhyI7VHxPPwD/Ty0TZJf80tpDQp5EmokdqvBm5CjvEuw2LlQFvGE4qwc= =RUbc -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Ira Weiny: "A kmap conversion and a bug fix this go around: - drivers/nvdimm: Use local kmaps - nvdimm: virtio_pmem: serialize flush requests" * tag 'libnvdimm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm: virtio_pmem: serialize flush requests drivers/nvdimm: Use local kmaps |
||
|
Linus Torvalds
|
582a1ef360 |
RTLA patches for v7.0
- Remove unused function declarations Some functions were removed in recent code consolidation 6.18, but their prototypes were not removed from headers. Remove them. - Set stop threshold after enabling instances Prefer recording samples without stopping on them on the start of tracing to stopping on samples that are never recorded. This fixes flakiness of some RTLA tests and unifies behavior of sample collection between tracefs mode and BPF mode. - Consolidate usage help message implementation RTLA tools (osnoise-top, osnoise-hist, timerlat-top, timerlat-hist) each implement usage help individually. Move common logic between them into a new function to reduce code duplication. - Add BPF actions feature Add option --bpf-action to attach a BPF program (passed as filename of its ELF representation) to be executed via BPF tail call at latency threshold. - Consolidate command line option parsing Each RTLA tool implements the parsing of command line options individually. Now that we have a common structure for parameters, unify the parsing of those options common among all four tools into one function. - De-duplicate cgroup common code Two functions in utils.c, setting cgroup for comm and setting cgroup for pid, duplicate code for constructing the cgroup path. Extract it to a new helper function. - String and error handling fixes and cleanups There were several instances of unsafe string and error handling that could cause invalid memory access; fix them. Also, remove a few unused headers, update .gitignore, and deduplicate code. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaY3l2RQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qrWcAP4lsfIbNhfvmc9htDON/GlCu9FK8PTT hmAsO7MeHh29OwD+OS7RZzRza+3G+B4aTcqUXQVfAvx9qenS591LcktQSAo= =VUW2 -----END PGP SIGNATURE----- Merge tag 'trace-rtla-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull RTLA updates from Steven Rostedt: - Remove unused function declarations Some functions were removed in recent code consolidation 6.18, but their prototypes were not removed from headers. Remove them. - Set stop threshold after enabling instances Prefer recording samples without stopping on them on the start of tracing to stopping on samples that are never recorded. This fixes flakiness of some RTLA tests and unifies behavior of sample collection between tracefs mode and BPF mode. - Consolidate usage help message implementation RTLA tools (osnoise-top, osnoise-hist, timerlat-top, timerlat-hist) each implement usage help individually. Move common logic between them into a new function to reduce code duplication. - Add BPF actions feature Add option --bpf-action to attach a BPF program (passed as filename of its ELF representation) to be executed via BPF tail call at latency threshold. - Consolidate command line option parsing Each RTLA tool implements the parsing of command line options individually. Now that we have a common structure for parameters, unify the parsing of those options common among all four tools into one function. - De-duplicate cgroup common code Two functions in utils.c, setting cgroup for comm and setting cgroup for pid, duplicate code for constructing the cgroup path. Extract it to a new helper function. - String and error handling fixes and cleanups There were several instances of unsafe string and error handling that could cause invalid memory access; fix them. Also, remove a few unused headers, update .gitignore, and deduplicate code. * tag 'trace-rtla-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (30 commits) rtla: Fix parse_cpu_set() bug introduced by strtoi() rtla: Fix parse_cpu_set() return value documentation rtla: Ensure null termination after read operations in utils.c rtla: Make stop_tracing variable volatile rtla: Add generated output files to gitignore rtla: Fix NULL pointer dereference in actions_parse rtla: Remove unused headers rtla: Remove redundant memset after calloc rtla: Use standard exit codes for result enum rtla: Replace atoi() with a robust strtoi() rtla: Introduce for_each_action() helper tools/rtla: Deduplicate cgroup path opening code tools/rtla: Consolidate -H/--house-keeping option parsing tools/rtla: Consolidate -P/--priority option parsing tools/rtla: Consolidate -e/--event option parsing tools/rtla: Consolidate -d/--duration option parsing tools/rtla: Consolidate -D/--debug option parsing tools/rtla: Consolidate -C/--cgroup option parsing tools/rtla: Consolidate -c/--cpus option parsing tools/rtla: Add common_parse_options() ... |
||
|
Linus Torvalds
|
f75c03a761 |
runtime verifier changes for 7.0:
- Refactor da_monitor to minimise macros Complete refactor of da_monitor.h to reduce reliance on macros generating functions. Use generic static functions and uses the preprocessor only when strictly necessary (e.g. for tracepoint handlers). The change essentially relies on functions with generic names (e.g. da_handle) instead of monitor-specific as well adding the need to define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including the header rather than calling macros that would define functions. Also adapt monitors and documentation accordingly. - Cleanup DA code generation scripts Clean up functions in dot2c removing reimplementations of trivial library functions (__buff_to_string) and removing some other unused intermediate steps. - Annotate functions with types in the rvgen python scripts - Remove superfluous assignments and cleanup generated code The rvgen scripts generate a superfluous assignment to 0 for enum variables and don't add commas to the last elements, which is against the kernel coding standards. Change the generation process for a better compliance and slightly simpler logic. - Remove superfluous declarations from generated code The monitor container source files contained a declaration and a definition for the rv_monitor variable. The former is superfluous and was removed. - Fix reference to outdated documentation s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in da_monitor.h -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaY3j9xQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qup5AP0afGb2gr+SOIOu0dIAXjGLg3cbz0C4 J4bDx6H0cdgXywD+Maassm0nKIgDnOBLwtuwL0kEUAxllqn7RCZ2+ARwbAU= =dfCl -----END PGP SIGNATURE----- Merge tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull runtime verifier updates from Steven Rostedt: - Refactor da_monitor to minimize macros Complete refactor of da_monitor.h to reduce reliance on macros generating functions. Use generic static functions and uses the preprocessor only when strictly necessary (e.g. for tracepoint handlers). The change essentially relies on functions with generic names (e.g. da_handle) instead of monitor-specific as well adding the need to define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including the header rather than calling macros that would define functions. Also adapt monitors and documentation accordingly. - Cleanup DA code generation scripts Clean up functions in dot2c removing reimplementations of trivial library functions (__buff_to_string) and removing some other unused intermediate steps. - Annotate functions with types in the rvgen python scripts - Remove superfluous assignments and cleanup generated code The rvgen scripts generate a superfluous assignment to 0 for enum variables and don't add commas to the last elements, which is against the kernel coding standards. Change the generation process for a better compliance and slightly simpler logic. - Remove superfluous declarations from generated code The monitor container source files contained a declaration and a definition for the rv_monitor variable. The former is superfluous and was removed. - Fix reference to outdated documentation s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in da_monitor.h * tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rv: Fix documentation reference in da_monitor.h verification/rvgen: Remove unused variable declaration from containers verification/dot2c: Remove superfluous enum assignment and add last comma verification/dot2c: Remove __buff_to_string() and cleanup verification/rvgen: Annotate DA functions with types verification/rvgen: Adapt dot2k and templates after refactoring da_monitor.h Documentation/rv: Adapt documentation after da_monitor refactoring rv: Cleanup da_monitor after refactor rv: Refactor da_monitor to minimise macros |
||
|
Linus Torvalds
|
a67594c977 |
OpenRISC updates for 6.20
The main focus for this series has been to improve OpenRISC
kernel out-of-the-box support for FPGA dev boards.
- Adds device tree configurations for De0 Nano single and
multicore configurations.
- Fixes bug in OpenRISC SMP preventing the kernel from running on FPGA
boards, due to IPIs not being unmasked on secondary CPUs in some
configurations.
- Picked up a fix from Brian Masney defining the nop() macro to fix
build failures on OpenRISC for drivers using the nop() macro.
-----BEGIN PGP SIGNATURE-----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=e/WD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"The main focus for this series has been to improve OpenRISC kernel
out-of-the-box support for FPGA dev boards.
- Add device tree configurations for De0 Nano single and multicore
configurations
- Fix bug in OpenRISC SMP preventing the kernel from running on FPGA
boards, due to IPIs not being unmasked on secondary CPUs in some
configurations
- Pick up a fix from Brian Masney defining the nop() macro to fix
build failures on OpenRISC for drivers using it"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: define arch-specific version of nop()
openrisc: dts: Add de0 nano multicore config and devicetree
openrisc: dts: Split simple smp dts to dts and dtsi
openrisc: Fix IPIs on simple multicore systems
openrisc: dts: Add de0 nano config and devicetree
|
||
|
Linus Torvalds
|
8c0901b6f9 |
configfs changes for v7.0
-----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEEsH5R1a/fCoV1sAS4bgaPnkoY3cFAmmMPp0WHGEuaGluZGJv cmdAa2VybmVsLm9yZwAKCRDhuBo+eShjdx9+D/4hz5pC/L0w21231hz00CLJqHps Mv4uPhy3vd0QqQ8/S25gQNesCirjGuC57NSQ4K1O3+UBJKaPNEnGJYS6nlc8/vsI 4heTR+F7QPu34RD/kgzeUu03/VhQyhQzHx10+e3qiQBEn6lwKqfZaKHnsUD5M2Zk eL8LydI87rXoC9TL5ASPEq33jB7d7ec8uH2fgPhUbysTmiFTIJkaOvIv6ukRo0y7 skdSJemXRjlknXqrhLtAxe5Bt7Ycq1BzEaPYc3xRGXT1B/jp/fJxhfK9AHc5ej+T 7A/Ewjdf9IEHZYKGnUDappXC/7SWsZw47BDrqljj/6a+aODYXlt+E4q1kNBBnA4L I8oVMf485BaZhLbpWdtVTztlLzO6DQg5MvN5KWxdhbz4JSn54eumLmvSjvvPfi0S FhRfR0+/vAvY7nSzZ2FXLQWt3Yg34mUUQUkJWb09TcNSts7WpdwcJP7gEwQSSVif wtEL65CNGoJlKH+KmImHFh4hINrwac53Jl5+qCbj+sfXmCRehb2XPSOZCHa+ivXq +0p9hneOgaPOfFZ67GSU6OAGtnT5X0tL69PiK3gvVD3P/t9W7/Qr8KF4E1Ksc00H CRxzhk2GkRgLaNR00xIY2L0vaeLO6R1Dsg+HFVJGMCM+8fm/Swsy3Mt0/LpG7Rl7 8EOqsbwRIBWySEz6og== =eFAh -----END PGP SIGNATURE----- Merge tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux Pull configfs updates from Andreas Hindborg: - Switch the configfs rust bindings to use c string literals provided by the compiler, rather than a macro - A follow up on constifying `configfs_item_operations`, applying the change to the configfs sample * tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux: samples: configfs: Constify struct configfs_item_operations and configfs_group_operations rust: configfs: replace `kernel::c_str!` with C-Strings |
||
|
Linus Torvalds
|
136114e0ab |
mm.git review status for linus..mm-nonmm-stable
Total patches: 107 Reviews/patch: 1.07 Reviewed rate: 67% - The 2 patch series "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" from Heming Zhao saves disk space by teaching ocfs2 to reclaim suballocator block group space. - The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in various places. - The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size. - The 7 patch series "kallsyms: Prevent invalid access when showing module buildid" from Petr Mladek cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces. - The 3 patch series "Address page fault in ima_restore_measurement_list()" from Harshit Mogalapalli fixes a kexec-related crash that can occur when booting the second-stage kernel on x86. - The 6 patch series "kho: ABI headers and Documentation updates" from Mike Rapoport updates the kexec handover ABI documentation. - The 4 patch series "Align atomic storage" from Finn Thain adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh. - The 2 patch series "kho: clean up page initialization logic" from Pratyush Yadav simplifies the page initialization logic in kho_restore_page(). - The 6 patch series "Unload linux/kernel.h" from Yury Norov moves several things out of kernel.h and into more appropriate places. - The 7 patch series "don't abuse task_struct.group_leader" from Oleg Nesterov removes the usage of ->group_leader when it is "obviously unnecessary". - The 5 patch series "list private v2 & luo flb" from Pasha Tatashin adds some infrastructure improvements to the live update orchestrator. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6 0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww= =mmsH -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ... |
||
|
Linus Torvalds
|
4cff5c05e0 |
mm.git review status for linus..mm-stable
Everything:
Total patches: 325
Reviews/patch: 1.39
Reviewed rate: 72%
Excluding DAMON:
Total patches: 262
Reviews/patch: 1.63
Reviewed rate: 82%
Excluding DAMON and zram:
Total patches: 248
Reviews/patch: 1.72
Reviewed rate: 86%
- The 14 patch series "powerpc/64s: do not re-activate batched TLB
flush" from Alexander Gordeev makes arch_{enter|leave}_lazy_mmu_mode()
nest properly.
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- The 7 patch series "zram: introduce compressed data writeback" from
Richard Chang and Sergey Senozhatsky implements data compression for
zram writeback.
- The 8 patch series "mm: folio_zero_user: clear page ranges" from David
Hildenbrand adds clearing of contiguous page ranges for hugepages.
Large improvements during demand faulting are demonstrated.
- The 2 patch series "memcg cleanups" from Chen Ridong tideis up some
memcg code.
- The 12 patch series "mm/damon: introduce {,max_}nr_snapshots and
tracepoint for damos stats" from SeongJae Park improves DAMOS stat's
provided information, deterministic control, and readability.
- The 3 patch series "selftests/mm: hugetlb cgroup charging: robustness
fixes" from Li Wang fixes a few issues in the hugetlb cgroup charging
selftests.
- The 5 patch series "Fix va_high_addr_switch.sh test failure - again"
from Chunyu Hu addresses several issues in the va_high_addr_switch test.
- The 5 patch series "mm/damon/tests/core-kunit: extend existing test
scenarios" from Shu Anzai improves the KUnit test coverage for DAMON.
- The 2 patch series "mm/khugepaged: fix dirty page handling for
MADV_COLLAPSE" from Shivank Garg fixes a glitch in khugepaged which was
causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN.
- The 29 patch series "arch, mm: consolidate hugetlb early reservation"
from Mike Rapoport reworks and consolidates a pile of straggly code
related to reservation of hugetlb memory from bootmem and creation of
CMA areas for hugetlb.
- The 9 patch series "mm: clean up anon_vma implementation" from Lorenzo
Stoakes cleans up the anon_vma implementation in various ways.
- The 3 patch series "tweaks for __alloc_pages_slowpath()" from
Vlastimil Babka does a little streamlining of the page allocator's
slowpath code.
- The 8 patch series "memcg: separate private and public ID namespaces"
from Shakeel Butt cleans up the memcg ID code and prevents the
internal-only private IDs from being exposed to userspace.
- The 6 patch series "mm: hugetlb: allocate frozen gigantic folio" from
Kefeng Wang cleans up the allocation of frozen folios and avoids some
atomic refcount operations.
- The 11 patch series "mm/damon: advance DAMOS-based LRU sorting" from
SeongJae Park improves DAMOS's movement of memory betewwn the active and
inactive LRUs and adds auto-tuning of the ratio-based quotas and of
monitoring intervals.
- The 18 patch series "Support page table check on PowerPC" from Andrew
Donnellan makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc.
- The 3 patch series "nodemask: align nodes_and{,not} with underlying
bitmap ops" from Yury Norov makes nodes_and() and nodes_andnot()
propagate the return values from the underlying bit operations, enabling
some cleanup in calling code.
- The 5 patch series "mm/damon: hide kdamond and kdamond_lock from API
callers" from SeongJae Park cleans up some DAMON internal interfaces.
- The 4 patch series "mm/khugepaged: cleanups and scan limit fix" from
Shivank Garg does some cleanup work in khupaged and fixes a scan limit
accounting issue.
- The 24 patch series "mm: balloon infrastructure cleanups" from David
Hildenbrand goes to town on the balloon infrastructure and its page
migration function. Mainly cleanups, also some locking simplification.
- The 2 patch series "mm/vmscan: add tracepoint and reason for
kswapd_failures reset" from Jiayuan Chen adds additional tracepoints to
the page reclaim code.
- The 3 patch series "Replace wq users and add WQ_PERCPU to
alloc_workqueue() users" from Marco Crivellari is part of Marco's
kernel-wide migration from the legacy workqueue APIs over to the
preferred unbound workqueues.
- The 9 patch series "Various mm kselftests improvements/fixes" from
Kevin Brodsky provides various unrelated improvements/fixes for the mm
kselftests.
- The 5 patch series "mm: accelerate gigantic folio allocation" from
Kefeng Wang greatly speeds up gigantic folio allocation, mainly by
avoiding unnecessary work in pfn_range_valid_contig().
- The 5 patch series "selftests/damon: improve leak detection and wss
estimation reliability" from SeongJae Park improves the reliability of
two of the DAMON selftests.
- The 8 patch series "mm/damon: cleanup kdamond, damon_call(), damos
filter and DAMON_MIN_REGION" from SeongJae Park does some cleanup work
in the core DAMON code.
- The 8 patch series "Docs/mm/damon: update intro, modules, maintainer
profile, and misc" from SeongJae Park performs maintenance work on the
DAMON documentation.
- The 10 patch series "mm: add and use vma_assert_stabilised() helper"
from Lorenzo Stoakes refactors and cleans up the core VMA code. The
main aim here is to be able to use the mmap write lock's lockdep state
to perform various assertions regarding the locking which the VMA code
requires.
- The 19 patch series "mm, swap: swap table phase II: unify swapin use"
from Kairui Song removes some old swap code (swap cache bypassing and
swap synchronization) which wasn't working very well. Various other
cleanups and simplifications were made. The end result is a 20% speedup
in one benchmark.
- The 8 patch series "enable PT_RECLAIM on more 64-bit architectures"
from Qi Zheng makes PT_RECLAIM available on 64-bit alpha, loongarch,
mips, parisc, um, Various cleanups were performed along the way.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY1HfAAKCRDdBJ7gKXxA
jqhZAP9H8ZlKKqCEgnr6U5XXmJ63Ep2FDQpl8p35yr9yVuU9+gEAgfyWiJ43l1fP
rT0yjsUW3KQFBi/SEA3R6aYarmoIBgI=
=+HLt
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
||
|
Linus Torvalds
|
541c43310e |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmmMc1oACgkQnJ2qBz9k QNnwcQf/cV9BoA/RLKoYQ9WBQYIB5DCWW0JK+vsWFFdRH/imgLNZZeCZ5PscKvnv rjfo1HkrcQ4T+jjAQ4geRA828SXqmcKAiOQ9CTmuy+0Xgjkd79SjJ+C1nT+I0CHA /NnPWJktNX8jbpuhnBITo3J1eZ1tnuTUaHrQJRuBBKM1sPd0RvzZTVmteq66hxoA 1eD0HN/10Egh2l3wGMpIOTbtK505Jyxbbx1iKCz9jpqIQtsjyH/0NgBfkdLKai1C AKTaAneohH4meo6yPWrR1kRDSNDpcRVrcYcchuW+d6Oi1s1aPBBWxW9OxprYLpo+ x6E3njVixr+lz5xTfXjObBGFkl/LKQ== =Zhns -----END PGP SIGNATURE----- Merge tag 'fs_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota and isofs updates from Jan Kara: - a fix for quotactl livelock during filesystem freezing - a small improvement for isofs - a documentation fix for ext2 * tag 'fs_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: isofs: support full length file names (255 instead of 253) quota: fix livelock between quotactl and freeze_super doc : fix a broken link in ext2.rst |