irq_controller_lock doesn't protect anything, it is a leftover from early
development or copy/paste. Remove it completely.
Fixes: 96031b31a4 ("irqchip/exynos-combiner: Switch to raw_spinlock")
Suggested-by: Thomas Gleixner <tglx@kernel.org>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/all/20260521090453.bbUZ00tS@linutronix.de
Link: https://patch.msgid.link/20260522061012.2687122-1-m.szyprowski@samsung.com/
The Renesas RZ/T2H ICU is able to report errors for CA55, GIC, and
various IPs. Unmask these errors, request the IRQs and report them when
they occur.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260520203117.1516442-4-cosmin-gabriel.tanislav.xa@renesas.com
The Renesas RZ/T2H ICU supports software-triggerable interrupts.
Add a dedicated rzt2h_icu_intcpu_chip irq_chip which implements
rzt2h_icu_intcpu_set_irqchip_state() to allow injecting these
interrupts.
Request the INTCPU IRQs when IRQ injection is enabled to report them
when they occur.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260520203117.1516442-3-cosmin-gabriel.tanislav.xa@renesas.com
When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has
no MSI controller device tree node and GICv4, it results a panic as
“gic_domain” is NULL and the kernel attempts to access it.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
Mem abort info:
ESR = 0x0000000096000006
CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __irq_domain_instantiate+0x1d4/0x578
lr : __irq_domain_instantiate+0x1cc/0x578
Set vLPI support to false at init time if the host has no ITS, so it
propagates properly to kvm_vgic_global_state.has_gicv4.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260526125317.3672297-1-smostafa@google.com
pm_runtime_put() may trigger the idle check after pm_runtime_disable()
is run as part of devm_pm_runtime_enable()'s cleanup action, leaving
runtime PM active.
Use pm_runtime_put_sync() to ensure the idle check runs synchronously.
Fixes: 13e7b3305b ("irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260520203117.1516442-2-cosmin-gabriel.tanislav.xa@renesas.com
The exynos-combiner driver uses a regular spinlock to protect access to
the combiner interrupt status register in combiner_handle_cascade_irq(),
which is invoked in hard interrupt context as a chained interrupt handler.
When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a
sleeping lock (mutex-based), which must not be used in atomic context
such as hard interrupt handlers.
Switch the irq_controller_lock to raw_spinlock, which remains a true
non-sleeping spinlock even under PREEMPT_RT.
Fixes: a900e5d997 ("ARM: exynos: move exynos4210-combiner to drivers/irqchip")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees.
Fixes: 810979682c ("irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260330073234.303732-1-jiayuan.chen@linux.dev
The Vectored External Interrupt Controller mode present in the MIPS 34Kc
and 1004Kc variants causes the CPU to stop dispatching interrupts by the
normal code path and instead it sends those interrupts to the external
interrupt controller to be prioritized, renumbered, and sent back. When
they come back, they are handled through a different path using a dispatch
table, so plat_irq_dispatch() never sees action.
This of course subverts the traditional intc hierarchy, and on the 1004Kc
the interrupt controller is standardized (IRQ_GIC) so it can be reasonably
considered part of the CPU itself - and tighter coupling between IRQ_GIC
and arch/mips/* is tolerable. However on the 34Kc the intc is defined by
each SoC vendor, so it's required to have a modular driver - but for a
device which in fact ends up taking over the entire interrupt system.
Let the DT describe which IRQs which come from the CPU and should be
routed back and handled by the CPU intc. These particularly include the
two IPI interrupts which would otherwise necessitate duplication of all
the IPI supporting infrastructure from the CPU intc.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260430164157.6026-3-cjd@cjdns.fr
In MIPS VEIC mode (Vectored External Interrupt Controller), the
hardware stops directly dispatching CPU interrupts such as IPIs or CPU
performance counters, and instead it communicates them to the external
interrupt controller (the hardware described here) which prioritizes,
renumbers, and integrates them with its own hardware interrupt pins.
Interrupts from the external controller are then dispatched through a
different method via a dispatch table. In effect, the external
controller subsumes the CPU controller and becomes the root.
34K Manual (MD00534) Section 6.3.1.3 rev 1.13 page 136
Since there are interrupts which ought to be controlled by the CPU
controller driver - particularly the IPI interrupts - we create a
reverse mapping where those interrupts may be sent back to the CPU
intc when they are received. This maintains the fiction that there is
still a hierarchy, and keeps the DT the same no matter whether the
processor is in VEIC mode or not. The econet,cpu-interrupt-map is
optional and if omitted, it's assumed that no interrupts need to be
mapped.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260430164157.6026-2-cjd@cjdns.fr
Affinity changes of IMSIC interrupts have to be careful to not lose an
interrupt in the process. Each vector keeps track of an affinity change in
progress with two pointers in struct imsic_vector.
imsic_vector::move_prev points to the previous CPU target data and
imsic_vector::move_next to the designated new CPU target data.
imsic_vector::move_prev on the new CPU can only be cleared after the
previous CPU has cleared imsic_vector::move_next, which ususally happens in
__imsic_remote_sync().
In case of CPU hot-unplug __imsic_remote_sync() is not invoked because the
CPU is already marked offline. That means imsic_vector::move_prev becomes
stale until the CPU is onlined again.
The stale pointer prevents further affinity changes for the affected
interrupts.
Solve this by clearing the imsic_vector::move_prev pointers in the CPU
hotplug offline path.
[ tglx: Replace word salad in change log ]
Fixes: 0f67911e82 ("irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260508-imsic-v2-1-e9f08dd46cf5@sifive.com
meson_s4_gpio_irq_set_type() uses the both-edge trigger register for
configuring level type and single edge mode interrupts, which is not
correct.
Use REG_EDGE_POL instead.
Fixes: bbd6fcc76b ("irqchip: Add support for Amlogic A4 and A5 SoCs")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260508-a9-gpio-irqchip-v1-1-9dc5f3e022e0@amlogic.com
The Amlogic A9 SoCs supports the following GPIO interrupt lines:
A9 IRQ Number:
- 95:86 10 pins on bank Y
- 85:84 2 pins on bank CC
- 83:64 20 pins on bank A
- 63:48 16 pins on bank Z
- 47:30 18 pins on bank X
- 29:22 8 pins on bank H
- 21:14 8 pins on bank M
- 13:0 14 pins on bank B
A9 AO IRQ Number:
- 38 1 pins on bank TESTN
- 37:31 7 pins on bank C
- 30:13 18 pins on bank D
- 12:0 13 pins on bank AO
Update the driver to handle these variants.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260508-a9-gpio-irqchip-v1-3-9dc5f3e022e0@amlogic.com
meson_s4_gpio_irq_set_type() uses the both-edge trigger register for
configuring level type and single edge mode interrupts, which is not
correct.
Use REG_EDGE_POL instead.
Fixes: bbd6fcc76b ("irqchip: Add support for Amlogic A4 and A5 SoCs")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260508-a9-gpio-irqchip-v1-1-9dc5f3e022e0@amlogic.com
Recently handle_percpu_devid_irq() was changed to call
add_interrupt_randomness(). This introduced a potential deadlock when
handle_percpu_devid_irq() is used to handle an NMI, which can be
detected with lockdep, e.g.
================================
WARNING: inconsistent lock state
7.1.0-rc2-pnmi #465 Not tainted
--------------------------------
inconsistent {INITIAL USE} -> {IN-NMI} usage.
perf/695 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffff00837dfd3a18 (&base->lock){-.-.}-{2:2}, at: lock_timer_base+0x6c/0xac
{INITIAL USE} state was registered at:
_raw_spin_lock_irqsave+0x68/0xb0
lock_timer_base+0x6c/0xac
__mod_timer+0x100/0x32c
add_timer_global+0x2c/0x40
__queue_delayed_work+0xf0/0x140
queue_delayed_work_on+0x134/0x138
mem_cgroup_css_online+0x30c/0x310
online_css+0x34/0x10c
cgroup_init_subsys+0x158/0x1c8
cgroup_init+0x440/0x524
start_kernel+0x888/0x998
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&base->lock);
<Interrupt>
lock(&base->lock);
*** DEADLOCK ***
Call trace:
_raw_spin_lock_irqsave+0x68/0xb0
lock_timer_base+0x6c/0xac
add_timer_on+0x78/0x16c
add_interrupt_randomness+0x124/0x134
handle_percpu_devid_irq+0xd4/0x16c
handle_irq_desc+0x40/0x58
generic_handle_domain_nmi+0x28/0x50
__gic_handle_nmi.isra.0+0x4c/0xa0
gic_handle_irq+0x38/0x2bc
call_on_irq_stack+0x30/0x48
do_interrupt_handler+0x80/0x98
el1_interrupt+0x90/0xac
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x80/0x84
[...]
During review, Thomas pointed out it wouldn't be safe for
handle_percpu_devid_irq() to call add_interrupt_randomness() if it was
used to handle NMIs:
https://lore.kernel.org/lkml/87bjgik042.ffs@tglx/
... but evidently people missed that handle_percpu_devid_irq() *is* used
for NMIs.
While it might seem that NMIs should be handled with a separate
handle_percpu_devid_nmi() function, for various structural reasons this was
impractical, and handle_percpu_devid_irq() has been expected to be used for
NMIs since commits:
21bbbc50f3 ("irqchip/gic-v3: Switch high priority PPIs over to handle_percpu_devid_irq()")
5ff78c8de9 ("genirq: Kill handle_percpu_devid_fasteoi_nmi()")
Taking the above into account, avoid the deadlock by not calling
add_interrupt_randomness() when handle_percpu_devid_irq() is called in an
NMI context. This is consistent with other NNI handling flows, which do not
call add_interrupt_randomness().
At the same time, update the kernel-doc comment to make it clear that
handle_percpu_devid_irq() can be called in NMI context. The rest of
handle_percpu_devid_irq() is currently NMI safe and doesn't need to change.
Fixes: fd7400cfcb ("genirq/chip: Invoke add_interrupt_randomness() in handle_percpu_devid_irq()")
Reported-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260507110518.3128248-1-mark.rutland@arm.com
The ITS MSI domain no longer manages LPI allocation directly. LPIs are
allocated and freed by the parent LPI domain, which can now handle a
full range of interrupts and unwind partial allocations internally.
Make the ITS domain request and release the parent IRQs as a single
range instead of iterating over each interrupt. The ITS allocation
path then only needs to reserve EventIDs, allocate the parent range,
and fill in the ITS irq_data for each MSI. Since no operation in the
per-MSI loop can fail, the partial parent-free unwind becomes
unnecessary.
On teardown, reset the ITS irq_data for the range and then release the
parent range in one call, leaving LPI teardown to the LPI domain.
Fixes: 0f01013258 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260506093634.382062-4-sascha.bischoff@arm.com
The per-IPI parent allocation loop returns immediately on failure and leaks
any parent interrupts allocated by earlier iterations.
The GICv5 LPI domain now owns LPI allocation and teardown internally,
but its irq_domain callbacks still reject requests where nr_irqs is
greater than one. This forces child domains to allocate and free LPIs
one at a time even when the interrupt core requests a contiguous
range.
Handle multi-interrupt allocation and teardown in the LPI domain by
iterating over the requested range and unwinding any partially
allocated state on failure.
Allocate the parent LPIs for the IPI domain with a single range
request as well, which cures the leakage problem.
Fixes: 0f01013258 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260506093634.382062-3-sascha.bischoff@arm.com
The IPI and ITS MSI domains currently allocate and release LPIs
directly, then pass the selected LPI ID to the parent LPI domain. This
leaks the LPI domain's allocation policy into its child domains and
forces each child to duplicate part of the parent domain's teardown.
Make the LPI domain allocate LPIs in its .alloc() callback and release
them in a matching .free() callback. Child domains can then request a
parent interrupt without passing an implementation-specific LPI ID,
and the LPI lifetime is tied to the domain that owns the LPI
namespace.
Remove the gicv5_alloc_lpi() and gicv5_free_lpi() wrappers now that no
external caller needs to manage LPIs directly.
This is a preparatory change for an actual leakage problem in the
allocation code and therefore tagged with the same Fixes tag.
Fixes: 0f01013258 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260506093634.382062-2-sascha.bischoff@arm.com
devm_platform_ioremap_resource() returns an error pointer on failure, not
NULL.
Fix the check to use IS_ERR() and return PTR_ERR() to correctly handle
allocation failures.
Fixes: 2f59ca1854 ("irqchip/starfive: Use devm_ interfaces to simplify resource release")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://patch.msgid.link/20260506041413.1670799-1-nichen@iscas.ac.cn
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies.
Switch to unified "Qualcomm" so it will be easier for users to identify the
options when for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260427070121.18422-2-krzysztof.kozlowski@oss.qualcomm.com
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a macro that
only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace and kernelspace
coding, or when dealing with uapi headers that rather should use
__ASSEMBLER__ instead.
Standardize now on the __ASSEMBLER__ macro that is provided by the
compilers.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260421113012.146528-1-thuth@redhat.com
Add irq_set_type() callback to support configuring interrupt trigger types
(level high/low, edge rising/falling) for the JHB100 interrupt controller.
Also add irq_ack() callback as required by handle_edge_irq().
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-6-changhuang.liang@starfivetech.com
StarFive JHB100 SoC interrupt controller actually supports 64 interrupt
sources, the original code only supported up to 32. now it is extended to 64.
Also use guard(raw_spinlock) to automatically release spinlocks.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-5-changhuang.liang@starfivetech.com
Use devm_ interfaces to simplify resource release. Make clock and reset get
optional as they are not used on the JHB100 SoC. Replace pr_ logging with
dev_* logging. Use __free(kfree) cleanup attribute to auto-free irqc on
error paths
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-4-changhuang.liang@starfivetech.com
The StarFive JH8100 SoC was discontinued before production. The newly
taped-out JHB100 SoC uses the same interrupt controller IP. Rename the
driver file, Kconfig symbol, and internal references from "jh8100" to
"jhb100" to accurately reflect the supported hardware.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260416064751.632138-3-changhuang.liang@starfivetech.com
The StarFive JH8100 SoC was discontinued before production. The newly
taped-out JHB100 SoC uses the same interrupt controller IP.
Rename the binding file, compatible string, and MAINTAINERS entry from
"jh8100" to "jhb100". In JHB100 SoC, The clocks and resets are not operated
by users, but they exist in the hardware. Mark them as optional.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260416064751.632138-2-changhuang.liang@starfivetech.com
The existing AST2700 interrupt controller driver ("aspeed,ast2700-intc-ic")
was written against the A0 pre-production design.
From A1 onwards (retained in the A2 production silicon), the interrupt
fabric was re-architected: interrupt routing is programmable and interrupt
outputs can be directed to multiple upstream controllers (PSP GIC,
Secondary Service Processor (SSP) NVIC, Tertiary Service Processor (TSP)
NVIC, and Boot MCU interrupt controller). This design requires route
resolution and a controller hierarchy model which the A0 driver cannot
represent.
Remove driver support for A0 in favour of the driver for the A2 production
design.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-4-c0b0a300a057@aspeedtech.com
Add a KUnit suite for aspeed_intc0_resolve_route().
Cover invalid arguments, invalid domain/range data, connected and
disconnected mappings, and malformed upstream range cases.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-3-c0b0a300a057@aspeedtech.com
The AST2700 interrupt fabric is shared by multiple integrated processors
(PSP/SSP/TSP/BootMCU), each with its own interrupt controller and its own
devicetree view of the system. As a result, interrupt routing cannot be
treated as fixed: the valid route for a peripheral interrupt depends on
which processor is consuming it.
The INTC0 driver models this by creating a hierarchical irqdomain under
the upstream interrupt controller selected by the interrupt-parent
property in the devicetree. Information derived from this relationship
is incorporated into the route resolution logic for the controller.
The INTC1 driver implements the banked INTM-fed controller and forwards
interrupts toward INTC0, without embedding assumptions about the final
destination processor.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-2-c0b0a300a057@aspeedtech.com
Introduce a new binding describing the AST2700 interrupt controller
architecture implemented in the A2 production silicon.
The AST2700 SoC has undergone multiple silicon revisions (A0, A1, A2)
prior to mass production. The interrupt architecture was substantially
reworked after the A0 revision for A1, and the A1 design is retained
unchanged in the A2 production silicon.
The existing AST2700 interrupt controller binding ("aspeed,ast2700-intc-ic")
was written against the pre-production A0 design.
That binding does not accurately describe the interrupt hierarchy and
routing model present in A1/A2, where interrupts can be routed to multiple
processor-local interrupt controllers (Primary Service Processor (PSP) GIC,
Secondary Service Processor (SSP)/Tertiary Service Processor (TSP) NVICs,
and BootMCU APLIC) depending on the execution context.
Remove the binding for the pre-production A0 design in favour of the
binding for the A2 production design. There is no significant user
impact from the removal as there are no existing devicetrees in any
of Linux, u-boot or Zephyr that make use of the A0 binding.
Hardware connectivity between interrupt controllers is expressed using
the aspeed,interrupt-ranges property.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260407-irqchip-v5-1-c0b0a300a057@aspeedtech.com
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----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=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----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=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode
-----BEGIN PGP SIGNATURE-----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=mY/t
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
mentioning separately: Rafael's commit converting tpm_crb from ACPI driver
to a platform driver. Starting from this release cycle, the branch with TPM
changes mirrored to next is 'for-next-tpm', and patches for keys have their
own separate 'for-next-keys' branch.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaezVbgAKCRAaerohdGur
0ggHAQDmhaZ2C3ddAV1WjfXh1YqdWAmqEqoP7ZHAh4OrjyRPTQD+Pc4xl9TSOgHx
/9WzzV6AM6fL5RuC2/PO5RvOKF9mswc=
=tpJM
-----END PGP SIGNATURE-----
Merge tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736a ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Several development updates for 7.1-rc1:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
-----BEGIN PGP SIGNATURE-----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=arB6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of
the saved ring buffer. This is because the ring buffer being read by
user space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other accounting
as well. On boot up, the "reader page" is accounted for but a rewind may
put it back into the buffer and then the reader page may be accounted
for again.
Save off the original reader page and skip accounting it when scanning
the pages in the ring buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaevLRxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsNBAQCO9T+3kbDLD/DxRBYjeMXhTg2iY2OV
SHV9jEzcYTahmwEAqVCFY9sNxVYXait/C924SmHCSi1N0HrIuEzIEd29iwk=
=bv+t
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of the
saved ring buffer. This is because the ring buffer being read by user
space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other
accounting as well. On boot up, the "reader page" is accounted for
but a rewind may put it back into the buffer and then the reader page
may be accounted for again.
Save off the original reader page and skip accounting it when
scanning the pages in the ring buffer.
* tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not double count the reader_page
-----BEGIN PGP SIGNATURE-----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=0AP+
-----END PGP SIGNATURE-----
Merge tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Series for zloop, fixing a variety of issues
- t10-pi code cleanup
- Fix for a merge window regression with the bio memory allocation mask
- Fix for a merge window regression in ublk, caused by an issue with
the maple tree iteration code at teardown
- ublk self tests additions
- Zoned device pgmap fixes
- Various little cleanups and fixes
* tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (21 commits)
Revert "floppy: fix reference leak on platform_device_register() failure"
ublk: avoid unpinning pages under maple tree spinlock
ublk: refactor common helper ublk_shmem_remove_ranges()
ublk: fix maple tree lockdep warning in ublk_buf_cleanup
selftests: ublk: add ublk auto integrity test
selftests: ublk: enable test_integrity_02.sh on fio 3.42
selftests: ublk: remove unused argument to _cleanup
block: only restrict bio allocation gfp mask asked to block
block/blk-throttle: Add WQ_PERCPU to alloc_workqueue users
block: Add WQ_PERCPU to alloc_workqueue users
block: relax pgmap check in bio_add_page for compatible zone device pages
block: add pgmap check to biovec_phys_mergeable
floppy: fix reference leak on platform_device_register() failure
ublk: use unchecked copy helpers for bio page data
t10-pi: reduce ref tag code duplication
zloop: remove irq-safe locking
zloop: factor out zloop_mark_{full,empty} helpers
zloop: set RQF_QUIET when completing requests on deleted devices
zloop: improve the unaligned write pointer warning
zloop: use vfs_truncate
...
