The helper intel_dp_compute_config_link_bpp_limits is the correct place
to set the DSC link limits. Move the code to this function and remove
the #TODO item.
v2: Add argument intel_connector to the helper to get correct connector
for DP MST. (Imre)
v3: Remove redundant calls to intel_dp_dsc_sink_max_compressed_bpp as
its already accounted while setting link bpp limits.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-14-ankit.k.nautiyal@intel.com
Modify the dsc helpers to get max/min compressed bpp to accept
`const struct intel_crtc_state *` pointers instead of
`struct intel_crtc_state *`.
These helpers are not supposed to modify `crtc_state`.
Accepting const pointers will allow these helpers to be called from
functions that have const pointer to crtc_state.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-13-ankit.k.nautiyal@intel.com
Currently to get the max pipe_bpp with dsc we take the min of
limits->pipe.max_bpp and dsc max bpp (dsc max bpc * 3). This can result
in problems when limits->pipe.max_bpp is less than the computed dsc min bpp
(dsc min bpc * 3).
Replace the min/max functions with clamp while computing
limits->pipe.max/min_bpp to ensure that the pipe_bpp limits are constrained
within the DSC-defined minimum and maximum values.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-12-ankit.k.nautiyal@intel.com
With DSC there are additional limits for pipe_bpp. Currently these are
scattered in different places.
Instead set the limits->pipe.max/min_bpp in one place and use them
wherever required.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-10-ankit.k.nautiyal@intel.com
Currently we are including both max_requested_bpc and
limits->pipe.bpp_max while computing maximum possible pipe bpp with dsc.
However, while setting limits->pipe.max_bpp, the max_requested_bpc is
already taken into account.
Drop the redundant check for max_requested_bpc and use only
limits->pipe.bpp_max. This will also result in dropping conn_state
argument in functions where it was used only to get max_requested_bpc.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-9-ankit.k.nautiyal@intel.com
DSC support is already checked before the helper
intel_dp_dsc_max_src_input_bpc is called.
Remove the check from the helper.
v2: Drop the argument struct drm_i915_private *i915. (Suraj)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-6-ankit.k.nautiyal@intel.com
Support for FEC is already checked by intel_dp_supports_dsc() in
intel_dp_dsc_compute_config() which gets called before
intel_dp_fec_compute_config().
Therefore the check can be dropped from the helper
intel_dp_fec_compute_config().
v2: Changed commit message for clarity. (Suraj)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-5-ankit.k.nautiyal@intel.com
Make a separate function for setting fec_enable in crtc_state.
v2: Rename helper to align with encoder->compute_config() callback
and other minor fixes. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-4-ankit.k.nautiyal@intel.com
Forward Error Correction is required for DP if we are using DSC but
is optional for eDP.
Currently the helper intel_dp_supports_dsc checks if fec_enable is set for
DP or not. The helper is called after fec_enable is set in crtc_state.
Instead of this a better approach would be to:
first, call intel_dp_supports_dsc to check for DSC support
(along with FEC requirement for DP) and then set fec_enable for DP
(if not already set) in crtc_state.
To achieve this, remove the check for fec_enable in the helper and instead
check for FEC support for DP. With this change the helper
intel_dp_supports_dsc can be called earlier and return early if DSC is
not supported. The structure intel_dp is added to the helper to get the
FEC support for DP.
v2: Pass intel_dp to adjust_limits_for_dsc_hblank_expansion_quirk
instead of deriving it from connector. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217093244.3938132-2-ankit.k.nautiyal@intel.com
Many selftests call igt_flush_test() on cleanup. With default preemption
timeout of compute engines raised to 7.5 seconds, hardcoded flush timeout
of 3 seconds is too short. That results in GPU forcibly wedged and kernel
taineted, then IGT abort triggered. CI BAT runs loose a part of their
expected coverage.
Calculate the flush timeout based on the longest preemption timeout
currently configured for any engine. That way, selftest can still report
detected issues as non-critical, and the GPU gets a chance to recover from
preemptible hangs and prepare for fluent execution of next test cases.
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213190122.513709-2-janusz.krzysztofik@linux.intel.com
sub-pipe PG is not present on DG1. Setting these bits can disable
other power gates and cause GPU hangs on video playbacks.
VLK: 16314, 4304
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13381
Fixes: 85a12d7eb8 ("drm/i915/tgl: Fix Media power gate sequence.")
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219210019.70532-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that we don't include i915_drv.h via any headers from display, we
can reliably remove unnecessary i915_drv.h includes and be sure they're
not indirectly included. Add other includes where needed.
v2: Fix 32-bit build
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217132147.2008057-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to spec VDR_CUSTOM_WIDTH register gets programmed after pll
specific VDR registers and TX Lane programming registers are done.
Moreover we only program into C10_VDR_CONTROL1 to update config and
setup master lane once all VDR registers are written into.
Bspec: 67636
Fixes: 51390cc0e0 ("drm/i915/mtl: Add Support for C10 PHY message bus and pll programming")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241216181554.2861381-1-suraj.kandpal@intel.com
Add to_intel_uncore() function to avoid the inclusion of i915_drv.h from
intel_de.h. This reveals a number of implicit dependencies on i915_drv.h
that need to be added.
For now, to_intel_uncore() can be an inline function, with all the
includes in compat intel_uncore.h, as long as i915_drv.h isn't
included. The implicit dependencies on i915_drv.h is a problem in
display code, but the same is not true for xe_device.h etc.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/377e2b400d126776224fc49874ed9cb03ac3123c.1732104170.git.jani.nikula@intel.com
The __to_intel_display() generics require the definition of struct
drm_i915_private i.e. inclusion of i915_drv.h. Add
intel_display_conversion.c with a __i915_to_display() function to do the
conversion without the intel_display_conversion.h having an implicit
dependency on i915_drv.h.
The long term goal is to remove __to_intel_display() and the
intel_display_conversion.[ch] files altoghether, and this is merely a
transitional step to make the dependencies on i915_drv.h explicit.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/39e99b765b8c1a05d001659c39686a661ac268e2.1732104170.git.jani.nikula@intel.com
The i915_reg_rw tracing is a small isolated part of i915_trace.h. Its
users are orthogonal to the other i915_trace.h users as well, and its
implementation does not require all the includes of i915_trace.h. Split
i915_reg_rw tracing to separate intel_uncore_trace.[ch].
The main underlying goal is to reduce implicit includes of i915_drv.h
from display code.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a3623fbb120adc55bc1cab1e27aca6e55487163.1732104170.git.jani.nikula@intel.com
The long term goal is to remove the __to_intel_display() generics from
display macros, such as register macros. This requires that all such
macro usage passes struct intel_display * rather than struct
drm_i915_private * to the macros.
The short term goal is to hide the struct drm_i915_private access in
intel_display_conversions.h into a function. This is problematic with
gvt, because it's a separate module, and the conversion function would
need to be exported.
Make the conversion to always passing struct intel_display * in gvt to
unblock both of the above.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/266616e14db8d9a342fd93ec9752f561149a799b.1732104170.git.jani.nikula@intel.com
There's a lot of duplication between mst_stream_compute_config_limits()
and intel_dp_compute_config_limits(). Adjust the latter to suit the
needs of the former, and use the same function for both. This reduces
duplication and highlights the differences for SST and MST and UHBR.
Remove the kernel-doc for intel_dp_compute_config_link_bpp_limits()
which now becomes static.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211144310.701895-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cursor planes do not have the minimum dbuf configuration. The
ddb allocation and registration routines handle this correctly.
But the plane wm handling for cursor need to be differentiated
for this case. Auto minimum buf enable bit should not be
enabled for cursor wm registers in xe3.
Fixes: a831920c37 ("drm/i915/xe3: Use hw support for min/interim ddb allocations for async flip")
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213120357.300584-1-vinod.govindapillai@intel.com
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Xe3 is capable of switching automatically to min ddb allocation
(not using any extra blocks) or interim SAGV-adjusted allocation
in case if async flip is used. Introduce the minimum and interim
ddb allocation configuration for that purpose. Also i915 is
replaced with intel_display within the patch's context
v2: update min/interim ddb declarations and handling (Ville)
update to register definitions styling
consolidation of minimal wm0 check with min DDB check
Bspec: 69880, 72053
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121112726.510220-4-vinod.govindapillai@intel.com
Add a helper to the relative data rate handling in skl_watermarks.c
where other similar functions are implemented. Also get rid of
use_min_ddb() and use use_minimal_wm0() instead to decide whether
the relative data rate can be returned as 0
v2: re-phrase the commit description (uma)
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121112726.510220-3-vinod.govindapillai@intel.com
Future platforms can have new additions in the plane_wm
registers. So update skl_wm_level_from_reg_val() to have
possiblity for such platform differentiations. This is in
preparation for the rest of the patches in this series where
hw support for the minimum and interim ddb allocations for
async flip is added. Replace all the i915 uses to intel_display
in this function while updating this function
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241121112726.510220-2-vinod.govindapillai@intel.com
G8 power state entry is disabled due to a limitation on DG2, so we
enable it from driver with Wa_14022698537. For now we enable it for
all DG2 devices with the exception of a few, for which, we enable
only when paired with whitelisted CPU models. This works with native
ASPM and reduces idle power consumption.
$ echo powersave > /sys/module/pcie_aspm/parameters/policy
$ lspci -s 0000:03:00.0 -vvv
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk-
v2: Fix Wa_ID and include it in subject (Badal)
Rephrase commit message (Jani)
v3: Move workaround to i915_pcode_init() (Badal, Anshuman)
Re-order macro (Riana)
v4: Spell fix (Riana)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211115952.1659287-5-raag.jadav@intel.com
Having similar naming convention in intel-family.h and intel_device_info.h
results in redefinition of a few platforms. Define CPU IDs in its own file
to avoid this.
v3: Move file out of gt directory, add kernel doc (Riana)
Rephrase file description (Jani)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211115952.1659287-4-raag.jadav@intel.com
Introduce DG2_D subplatform for the devices that span across multiple
DG2 subplatforms but are within same segment and will be useful for
segment specific features.
v3: Rework subplatform naming (Jani)
Split subplatform check into separate case (Jani)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211115952.1659287-3-raag.jadav@intel.com
Refactor DG2 PCI IDs into D, E and M ranges which will be useful for
segment specific features.
v3: Rework subplatform naming (Jani)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211115952.1659287-2-raag.jadav@intel.com
It does not look like anything in intel_dp_compute_config() after the
g4x_dp_set_clock() call depends on the changes it makes, namely setting
dpll and clock_set in crtc_state. Move the call one level higher to
g4x_dp_compute_config() to reduce the clutter in
intel_dp_compute_config().
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211125431.680227-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add g4x_dp_compute_config() instead of using intel_dp_compute_config()
directly, in order to slightly reduce the clutter in the latter wrt
->has_pch_encoder.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211125431.680227-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pass the drm_printer from intel_pipe_config_compare(), and use it for
logging, along with pipe_config_mismatch(), to simplify and unify.
While at it, differentiate the VSC and AS SDP log texts from each other.
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241205093042.3028608-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
