For NXP NCI devices (e.g. PN7150), the interrupt is level-triggered and
active high, not edge-triggered.
Using IRQF_TRIGGER_RISING in the driver can cause interrupts to fail
to trigger correctly.
Remove IRQF_TRIGGER_RISING and rely on the IRQ trigger type configured
via Device Tree.
Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://patch.msgid.link/20260205-fc-nxp-nci-remove-interrupt-trigger-type-v2-1-79d2ed4a7e42@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alice Mikityanska says:
====================
BIG TCP without HBH in IPv6
Resubmitting after the grace period.
This series is part 1 of "BIG TCP for UDP tunnels". Due to the number of
patches, I'm splitting it into two logical parts:
* Remove hop-by-hop header for BIG TCP IPv6 to align with BIG TCP IPv4.
* Fix up things that prevent BIG TCP from working with UDP tunnels.
The current BIG TCP IPv6 code inserts a hop-by-hop extension header with
32-bit length of the packet. When the packet is encapsulated, and either
the outer or the inner protocol is IPv6, or both are IPv6, there will be
1 or 2 HBH headers that need to be dealt with. The issues that arise:
1. The drivers don't strip it, and they'd all need to know the structure
of each tunnel protocol in order to strip it correctly, also taking into
account all combinations of IPv4/IPv6 inner/outer protocols.
2. Even if (1) is implemented, it would be an additional performance
penalty per aggregated packet.
3. The skb_gso_validate_network_len check is skipped in
ip6_finish_output_gso when IP6SKB_FAKEJUMBO is set, but it seems that it
would make sense to do the actual validation, just taking into account
the length of the HBH header. When the support for tunnels is added, it
becomes trickier, because there may be one or two HBH headers, depending
on whether it's IPv6 in IPv6 or not.
At the same time, having an HBH header to store the 32-bit length is not
strictly necessary, as BIG TCP IPv4 doesn't do anything like this and
just restores the length from skb->len. The same thing can be done for
BIG TCP IPv6. Removing HBH from BIG TCP would allow to simplify the
implementation significantly, and align it with BIG TCP IPv4, which has
been a long-standing goal.
====================
Link: https://patch.msgid.link/20260205133925.526371-1-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the HBH jumbo helpers are not used by any driver or GSO, remove
them altogether.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-13-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the bng_en TX path, that used to check and
remove HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Link: https://patch.msgid.link/20260205133925.526371-12-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the mana TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-11-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the gve TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-10-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the bnxt_en TX path, that used to check and
remove HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260205133925.526371-9-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the ice TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-8-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the mlx4 TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-7-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the mlx5e and mlx5i TX path, that used to check
and remove HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-6-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the GSO TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-5-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Complementary to the previous commit, stop inserting HBH when building
BIG TCP GRO SKBs.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-4-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BIG TCP IPv6 inserts a hop-by-hop extension header to indicate the real
IPv6 payload length when it doesn't fit into the 16-bit field in the
IPv6 header itself. While it helps tools parse the packet, it also
requires every driver that supports TSO and BIG TCP to remove this
8-byte extension header. It might not sound that bad until we try to
apply it to tunneled traffic. Currently, the drivers don't attempt to
strip HBH if skb->encapsulation = 1. Moreover, trying to do so would
require dissecting different tunnel protocols and making corresponding
adjustments on case-by-case basis, which would slow down the fastpath
(potentially also requiring adjusting checksums in outer headers).
At the same time, BIG TCP IPv4 doesn't insert any extra headers and just
calculates the payload length from skb->len, significantly simplifying
implementing BIG TCP for tunnels.
Stop inserting HBH when building BIG TCP GSO SKBs.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-3-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The next commits will transition away from using the hop-by-hop
extension header to encode packet length for BIG TCP. Add wrappers
around ip6->payload_len that return the actual value if it's non-zero,
and calculate it from skb->len if payload_len is set to zero (and a
symmetrical setter).
The new helpers are used wherever the surrounding code supports the
hop-by-hop jumbo header for BIG TCP IPv6, or the corresponding IPv4 code
uses skb_ip_totlen (e.g., in include/net/netfilter/nf_tables_ipv6.h).
No behavioral change in this commit.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-2-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera says:
====================
dpll: zl3073x: Include current frequency in supported frequencies list
This series ensures that the current operating frequency of a DPLL pin
is always reported in its supported frequencies list.
Problem:
When a ZL3073x DPLL pin is registered, its supported frequencies are
read from the firmware node's "supported-frequencies-hz" property.
However, if the firmware node is missing, or doesn't include the
current operating frequency, the pin reports a frequency that isn't
in its supported list. This inconsistency can confuse userspace tools
that expect the current frequency to be among the supported values.
Solution:
Always include the current pin frequency as the first entry in the
supported frequencies list, followed by any additional frequencies
from the firmware node (with duplicates filtered out).
Patch 1 refactors the output pin frequency calculation into a reusable
helper function zl3073x_dev_output_pin_freq_get(), which mirrors the
existing zl3073x_dev_ref_freq_get() for input pins.
Patch 2 modifies zl3073x_pin_props_get() to obtain the current
frequency early and place it at index 0 of the supported frequencies
array, ensuring it is always present regardless of firmware node
contents.
====================
Link: https://patch.msgid.link/20260205154350.3180465-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure the current pin frequency is always present in the list of
supported frequencies reported to userspace. Previously, if the
firmware node was missing or didn't include the current operating
frequency in the supported-frequencies-hz property, the pin would
report a frequency that wasn't in its supported list.
Get the current frequency early in zl3073x_pin_props_get():
- For input pins: use zl3073x_dev_ref_freq_get()
- For output pins: use zl3073x_dev_output_pin_freq_get()
Place the current frequency at index 0 of the supported frequencies
array, then append frequencies from the firmware node (if present),
skipping any duplicate of the current frequency.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260205154350.3180465-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce zl3073x_dev_output_pin_freq_get() helper function to compute
the output pin frequency based on synthesizer frequency, output divisor,
and signal format. For N-div signal formats, the N-pin frequency is
additionally divided by esync_n_period.
Add zl3073x_out_is_ndiv() helper to check if an output is configured
in N-div mode (2_NDIV or 2_NDIV_INV signal formats).
Refactor zl3073x_dpll_output_pin_frequency_get() callback to use the
new helper, reducing code duplication and enabling reuse of the
frequency calculation logic in other contexts.
This is a preparatory change for adding current frequency to the
supported frequencies list in pin properties.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260205154350.3180465-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, both the icssg-prueth and icssg-prueth-sr1 drivers create
a dedicated 'emac->cmd_wq' workqueue.
In the icssg-prueth-sr1 driver, this workqueue is not utilized at all.
In the icssg-prueth driver, the workqueue is only used to execute the
actual processing of ndo_set_rx_mode. However, creating a dedicated
workqueue for such a simple use case is unnecessary. To simplify the
code, switch to using the system default workqueue instead.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20260205-icssg-prueth-workqueue-v2-1-cf5cf97efb37@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This helper is already (auto)inlined from IPv4 TCP stack.
Make it an inline function to benefit IPv6 as well.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 30/-49 (-19)
Function old new delta
tcp_v6_rcv 3448 3478 +30
__pfx_tcp_filter 16 - -16
tcp_filter 33 - -33
Total: Before=24891904, After=24891885, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260205164329.3401481-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While compile testing on less common architectures, I noticed that gcc-10 on
s390 finds a bug that all other configurations seem to miss:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_set_multicast_list':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:391:25: error: 'cmd.data0' is used uninitialized in this function [-Werror=uninitialized]
391 | buf->data0 = htonl(data->data0);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:25: error: '*((void *)&cmd+4)' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_allocate_rings':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:13: error: 'cmd.data1' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data1' was declared here
1939 | struct myri10ge_cmd cmd;
| ^~~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:393:13: error: 'cmd.data2' is used uninitialized in this function [-Werror=uninitialized]
393 | buf->data2 = htonl(data->data2);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data2' was declared here
1939 | struct myri10ge_cmd cmd;
It would be nice to understand how to make other compilers catch this as
well, but for the moment I'll just shut up the warning by fixing the
undefined behavior in this driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260205162935.2126442-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver started using dimlib but fails to select the corresponding
symbol, which results in a link failure:
x86_64-linux-ld: drivers/net/ethernet/huawei/hinic3/hinic3_irq.o: in function `hinic3_poll':
hinic3_irq.c:(.text+0x179): undefined reference to `net_dim'
x86_64-linux-ld: drivers/net/ethernet/huawei/hinic3/hinic3_irq.o: in function `hinic3_rx_dim_work':
hinic3_irq.c:(.text+0x1fb): undefined reference to `net_dim_get_rx_moderation'
Fixes: b35a6fd37a ("hinic3: Add adaptive IRQ coalescing with DIM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260205161530.1308504-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The skb extension ids range from 0 .. 7 to fit their bits as flags into
a single byte. The ids are automatically enumnerated in enum skb_ext_id
in skbuff.h, where SKB_EXT_NUM is defined as the last value.
When having 8 skb extension ids (0 .. 7), SKB_EXT_NUM becomes 8 which is
a valid value for SKB_EXT_NUM.
Fixes: 96ea3a1e2d ("can: add CAN skb extension infrastructure")
Link: https://lore.kernel.org/netdev/aXoMqaA7b2CqJZNA@strlen.de/
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260205-skb_ext-v1-1-9ba992ccee8b@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prestera_ethtool_set_fecparam(), the error message is opposite of
the condition checking PRESTERA_PORT_TCVR_SFP. FEC configuration is
not allowed on SFP ports, but the message says "non-SFP ports", which
does not match the condition. However, FEC may be required depending on
the transceiver, cable, or mode, and firmware already validates invalid
combinations.
Remove the SFP transceiver check and let firmware handle validation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20260205091958.231413-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using kmem_cache_free_bulk() in fq_gc() was not optimal.
1) It needs an array.
2) It is only saving cpu cycles for large batches.
The automatic array forces a stack canary, which is expensive.
In practice fq_gc was finding zero, one or two flows at most
per round.
Remove the array, use kmem_cache_free().
This makes fq_enqueue() smaller and faster.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-79 (-79)
Function old new delta
fq_enqueue 1629 1550 -79
Total: Before=24886583, After=24886504, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260204190034.76277-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, unhash_nsid() scans the entire system for each netns being
killed, leading to O(L_dying_net * M_alive_net * N_id) complexity, as
__peernet2id() also performs a linear search in the IDR.
Optimize this to O(M_alive_net * N_id) by batching unhash operations. Move
unhash_nsid() out of the per-netns loop in cleanup_net() to perform a
single-pass traversal over survivor namespaces.
Identify dying peers by an 'is_dying' flag, which is set under net_rwsem
write lock after the netns is removed from the global list. This batches
the unhashing work and eliminates the O(L_dying_net) multiplier.
To minimize the impact on struct net size, 'is_dying' is placed in an
existing hole after 'hash_mix' in struct net.
Use a restartable idr_get_next() loop for iteration. This avoids the
unsafe modification issue inherent to idr_for_each() callbacks and allows
dropping the nsid_lock to safely call sleepy rtnl_net_notifyid().
Clean up redundant nsid_lock and simplify the destruction loop now that
unhashing is centralized.
Signed-off-by: Qiliang Yuan <yuanql9@chinatelecom.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204074854.3506916-1-realwujing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously the HW-GRO code was using a separate page_pool for the header
buffer. The pages of the header buffer were replenished via UMR. This
mechanism has some drawbacks:
- Reference counting on the page_pool page frags is not cheap.
- UMRs have HW overhead for updating and also for access. Especially for
the KLM type which was previously used.
- UMR code for headers is complex.
This patch switches to using a static memory area (static MTT MKEY) for
the header buffer and does a header memcpy. This happens only once per
GRO session. The SKB is allocated from the per-cpu NAPI SKB cache.
Performance numbers for x86:
+---------------------------------------------------------+
| Test | Baseline | Header Copy | Change |
|---------------------+------------+-------------+--------|
| iperf3 oncpu | 59.5 Gbps | 64.00 Gbps | 7 % |
| iperf3 offcpu | 102.5 Gbps | 104.20 Gbps | 2 % |
| kperf oncpu | 115.0 Gbps | 130.00 Gbps | 12 % |
| XDP_DROP (skb mode) | 3.9 Mpps | 3.9 Mpps | 0 % |
+---------------------------------------------------------+
Notes on test:
- System: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
- oncpu: NAPI and application running on same CPU
- offcpu: NAPI and application running on different CPUs
- MTU: 1500
- iperf3 tests are single stream, 60s with IPv6 (for slightly larger
headers)
- kperf version [1]
[1] git://git.kernel.dk/kperf.git
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260204200345.1724098-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we are registering one dynamic lockdep key for each allocated
qdisc, to avoid false deadlock reports when mirred (or TC eBPF) redirects
packets to another device while the root lock is acquired [1].
Since dynamic keys are a limited resource, we can save them at least for
qdiscs that are not meant to acquire the root lock in the traffic path,
or to carry traffic at all, like:
- clsact
- ingress
- noqueue
Don't register dynamic keys for the above schedulers, so that we hit
MAX_LOCKDEP_KEYS later in our tests.
[1] https://github.com/multipath-tcp/mptcp_net-next/issues/451
Changes in v2:
- change ordering of spin_lock_init() vs. lockdep_register_key()
(Jakub Kicinski)
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/94448f7fa7c4f52d2ce416a4895ec87d456d7417.1770220576.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When looking at the iMX93 documentation, the definitions in the driver
do not correspond with the documentation, which makes the driver
confusing.
The driver, for example, re-uses a definition for bit 0 for two
different registers, where this bit have completely different purposes.
Fix this by renaming the second register, and adding a definition that
reflects the true purpose of bit 0 in the first register (EQOS enable.)
Replace MX93_GPR_ENET_QOS_INTF_MODE_MASK with MX93_GPR_ENET_QOS_ENABLE
and MX93_GPR_ENET_QOS_INTF_SEL_MASK as MX93_GPR_ENET_QOS_INTF_MODE_MASK
is not a register field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnaGl-00000007i9f-0ZMw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP v6 spends a good amount of time rebuilding a fresh fl6 at each
transmit in inet6_csk_xmit()/inet6_csk_route_socket().
TCP v4 caches the information in inet->cork.fl.u.ip4 instead.
This patch is a first step converting IPv6 to the same strategy:
Before this patch inet6_sk_rebuild_header() only validated/rebuilt
a dst. Automatic variable @fl6 content was lost.
After this patch inet6_sk_rebuild_header() also initializes
inet->cork.fl.u.ip6, which can be reused in the future.
This makes inet6_sk_rebuild_header() very similar to
inet_sk_rebuild_header().
Also remove the EXPORT_SYMBOL_GPL(), inet6_sk_rebuild_header()
is not called from any module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260204163035.4123817-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: remove net/core/request_sock.c and no longer inline __reqsk_free()
After DCCP removal, net/core/request_sock.c makes no more sense.
Move reqsk_queue_alloc() and reqsk_fastopen_remove() to TCP files.
Then put __reqsk_free() out of line to save ~2 Kbytes of text.
====================
Link: https://patch.msgid.link/20260204055147.1682705-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After DCCP removal, this file was not needed any more.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function belongs to TCP stack, not to net/core/request_sock.c
We get rid of the now empty request_sock.c n the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only called once from inet_csk_listen_start(), it can be static.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: rk: final cleanups part
This is the last part of my current dwmac-rk cleanups.
====================
Link: https://patch.msgid.link/aYMN2gZMfLPKuukG@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rk3506, rk3528 and rk3588 have the rmii_mode bit in the clock GRF
register rather than the gmac GRF register. Provide a mask for this
field in the clock register, and convert these SoCs to use this.
Add the necessary code in rk_gmac_powerup() to write this field.
This allows us to get rid of these SoCs set_to_rmii() function. As
such, we need to mark these SoCs as supporting RMII mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYyB-00000007hpF-1dwK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use rk_encode_wm16() for RMII clock gating control, and also for the
io_clksel bit used to select the transmit clock between CRU-derived
and IO-derived clock sources.
Both of these were configured via the "set_clock_selection" method in
the SoC specific operations, but there is no requirement to change the
io_clksel except when enabling clocks.
It is also possible that we don't need to ungate the RMII clock if we
are operating in RGMII mode, but this commit makes no change there.
Split up the configuration of these as separate functions, and remove
the set_clock_selection() method. Since these clocking bits are in the
same register that we call the "speed" register, move the logic for
writing that register into rk_write_speed_grf_reg().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYy6-00000007hp9-1AJM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RK3528 gmac0 dtsi contains:
gmac0: ethernet@ffbd0000 {
phy-handle = <&rmii0_phy>;
phy-mode = "rmii";
mdio0: mdio {
rmii0_phy: ethernet-phy@2 {
phy-is-integrated;
};
};
};
This follows the same pattern as rk3328, where this gmac instance
only supports RMII. Disable RGMII in phylink's supported_interfaces
mask for this gmac instance.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/E1vnYy1-00000007hp3-0hKm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As detailed in a previous commit ("net: stmmac: rk: convert rk3328 to
use bsp_priv->id") rk3328 gmac2phy only supports RMII, whereas gmac2io
supports both RMII and RGMII. Clear supports_rgmii for gmac2phy.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328 gmac2io,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxw-00000007hox-0DqH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than providing a now-empty set_to_rmii() method to indicate
that RMII is supported, switch to setting ops->supports_rmii instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxq-00000007hor-3yXt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce two boolean flags into struct rk_priv_data indicating
whether RGMII and/or RMII is supported for this instance. Use these
to configure the supported_interfaces mask for phylink, validate the
interface mode. Initialise these from equivalent flags in the
rk_gmac_ops or depending on the presence of the ops->set_to_rgmii and
ops->set_to_mii methods. Finally, make ops->set_to_* optional.
This will allow us to get rid of empty set_to_rmii() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxl-00000007hol-3XiH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c5 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f72514b3c5 ("ipv6: clear RA flags when adding a static route")
Reported-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cb809def1baaac68ab92
Tested-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260204095837.1285552-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJdBAABCABHFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmmESMYbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyDRxmd0BzdHJsZW4uZGUACgkQcJGo2a1f9gBgYQ//
T/dMF552rXb0waQdllgXzMKV0Q7dHx1KsBKpYh2FRd+84Dg0WGsIcXsrSKY8nJU6
Q9zMgG6e6Z8RDbILX0BOs0DZh0rxhDnIBKu+nPexOJqxtY9xJxM1TWYaya+d+Nem
CFQs0PZ337lcUaPn/dPDeSty7AMHVSNfaUkKUIm2uHj1nPU8a2yam3IQQkgiuhZQ
TZ3ZMez2hx0Z9inqaBAxZkvqM4Vdr2O2e4htkCreGoTxocb9I7VkixUHkg22EJuy
j9T3ezNnmrJKXAlYPCBjaSuLWANXY+kqLk1BzWp/GDJB+Qk0bY9Sec9/aUQYMLVS
vllAKtX/x9DdwG5R2adQ8vmLFs0F2KzlJ2hoKZeSgy/ubmoNxL8UNc1+PcNJqNFt
ot7Wy86FteHPSB4lJPBYLgZETXxID2hxTujrCwYYgIr1VKOfPifXuA9q7lgfl271
gL+GKEzagMjNIqRgdZacSL8UHMfkpowU+4f6DyUx5gAOi1Gm+sR/M3PEKaVn4VgX
f1FzY1D3/SMo24OA9ISCfsmz/ypJOqzXiGzs+0VnsQhWxozATcG7efNrttNVzuqf
ZP2+BkWWxd0jpZL06aNDQI6Srvrmo/oWznrsDydK9o7kdE61bUlSJN+1V7Uotty7
bYVH5bgC2/Zvo+ZWz7ZrFfbCtMqPA9jyaIZGEE96yIY=
=eIZs
-----END PGP SIGNATURE-----
Merge tag 'nf-26-02-05' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: update for net
This is one last-minute crash fix for nf_tables, from Andrew Fasano:
Logical check is inverted, this makes kernel fail to correctly undo
the transaction, leading to a use-after-free.
* tag 'nf-26-02-05' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
====================
Link: https://patch.msgid.link/20260205074450.3187-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some functions do not modify the pointed-to data, but lack const
qualifiers. Add const qualifiers to the arguments of
flow_rule_match_has_control_flags() and flow_cls_offload_flow_rule().
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260204052839.198602-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ivan Vecera says:
====================
dpll: Core improvements and ice E825-C SyncE support
This series introduces Synchronous Ethernet (SyncE) support for the Intel
E825-C Ethernet controller. Unlike previous generations where DPLL
connections were implicitly assumed, the E825-C architecture relies
on the platform firmware (ACPI) to describe the physical connections
between the Ethernet controller and external DPLLs (such as the ZL3073x).
To accommodate this, the series extends the DPLL subsystem to support
firmware node (fwnode) associations, asynchronous discovery via notifiers,
and dynamic pin management. Additionally, a significant refactor of
the DPLL reference counting logic is included to ensure robustness and
debuggability.
DPLL Core Extensions:
* Firmware Node Association: Pins can now be associated with a struct
fwnode_handle after allocation via dpll_pin_fwnode_set(). This allows
drivers to link pin objects with their corresponding DT/ACPI nodes.
* Asynchronous Notifiers: A raw notifier chain is added to the DPLL core.
This allows the Ethernet driver to subscribe to events and react when
the platform DPLL driver registers the parent pins, resolving probe
ordering dependencies.
* Dynamic Indexing: Drivers can now request DPLL_PIN_IDX_UNSPEC to have
the core automatically allocate a unique pin index.
Reference Counting & Debugging:
* Refactor: The reference counting logic in the core is consolidated.
Internal list management helpers now automatically handle hold/put
operations, removing fragile open-coded logic in the registration paths.
* Reference Tracking: A new Kconfig option DPLL_REFCNT_TRACKER is added.
This allows developers to instrument and debug reference leaks by
recording stack traces for every get/put operation.
Driver Updates:
* zl3073x: Updated to associate pins with fwnode handles using the new
setter and support the 'mux' pin type.
* ice: Implements the E825-C specific hardware configuration for SyncE
(CGU registers). It utilizes the new notifier and fwnode APIs to
dynamically discover and attach to the platform DPLLs.
Patch Summary:
Patch 1: DPLL Core (fwnode association).
Patch 2: Driver zl3073x (Set fwnode).
Patch 3-4: DPLL Core (Notifiers and dynamic IDs).
Patch 5: Driver zl3073x (Mux type).
Patch 6: DPLL Core (Refcount refactor).
Patch 7-8: Refcount tracking infrastructure and driver updates.
Patch 9: Driver ice (E825-C SyncE logic).
====================
Link: https://patch.msgid.link/20260203174002.705176-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
