This patch adds missing bootargs for R-Car S4 Spider board.
One note is that current Spider board doesn't have Ethernet
support yet, but this patch adds standard settings for it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87leqo58ox.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The serial console and serial debug ports on Spider are located on the
CPU board. Hence move the aliases and chosen nodes containing serial
port configuration from the main Spider DTS file to the DTS file that
describes the CPU board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c03500bb10eae10caeb3f4f97bc979eeee6cce75.1663167551.git.geert+renesas@glider.be
The CN10/CN11 on RZ/N1-EB board are headers to add jumpers to select which
CAN interface to route to the real CAN connector J16.
For a normal use case either we need to wire CAN1 or CAN2, but not both.
This patch enables CAN1 and disables CAN2 by default assuming CN10/CN11
is wired for CAN1.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220902062752.56841-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
There is not much point in having separate entries for the ARM/Renesas
ARM64 and ARM/SH-Mobile ARM architectures, as they have the same
maintainers, use the same development collaboration infrastructure, and
share many files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/a869b8afdc47aa637ebeefcc1ca7bc61244f34b9.1660898008.git.geert+renesas@glider.be
- Fix the serial console on the Renesas White Hawk development board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYxHJ8AAKCRCKwlD9ZEnx
cN/8AP9XA09pTjmkn+PbDAy42t7tReRJ94zeQxyMZ2zDK3gLpAD7Bgk5rxtcCVj7
W2rVYSt84SJ9iVjBnwOIwrLk0Jo0Mg8=
=YXXk
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v6.0-tag1' into renesas-arm-dt-for-v6.1
Renesas fixes for v6.0
- Fix the serial console on the Renesas White Hawk development board.
We have V3H Condor board, and will have V3H2 Condor-I board.
This patch adds condor-common.dtsi to share the common settings
between these boards.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qsy625m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
With 'unevaluatedProperties' support implemented, there are a number of
warnings when running dtbs_check:
arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb: spi@ee200000: Unevaluated properties are not allowed ('clock-names' was unexpected)
From schema: Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
The main problem is that the DT bindings do not allow clock-names.
So just drop the clock-names properties from the SoC DTSI files.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220829215128.5983-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-7-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
I2C aliases are not a property of a SoC. They belong to board files
where they are named accordingly in the schematics.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220825071022.7864-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The interrupt number for the HSCIF0 serial port, which serves as the
serial console on the White Hawk board, is incorrect, causing userspace
to hang immediately as soon as it tries to print something.
Kernel output is unaffected, as it is printed using polling.
Fixes: 987da486d8 ("arm64: dts: renesas: Add Renesas R8A779G0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/751dcef40d4534e856ed49b1d5b3a3e8d365ec42.1661419377.git.geert+renesas@glider.be
As per the RZ/G2UL Hardware User's Manual (Rev.1.00 Apr, 2022),
the interrupt type of SCI{Rx,Tx} is edge triggered.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: cf40c9689e ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC")
Link: https://lore.kernel.org/r/20220802101534.1401342-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As per the RZ/V2L Hardware User's Manual (Rev.1.00 Nov, 2021),
the interrupt type of SCI{Rx,Tx} is edge triggered.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 7c2b8198f4 ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC")
Link: https://lore.kernel.org/r/20220802101534.1401342-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As per the latest RZ/G2L Hardware User's Manual (Rev.1.10 Apr, 2022),
the interrupt type of SCI{Rx,Tx} is edge triggered.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: f9a2adcc9e ("arm64: dts: renesas: r9a07g044: Add SCI[0-1] nodes")
Link: https://lore.kernel.org/r/20220802101534.1401342-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add macros for NMI and IRQ0-7 interrupts which map to SPI0-8 present on
RZ/G2L (and alike) SoC's so that these can be used in the first cell of
interrupt specifiers.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220722151155.21100-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
