On old GPUs, it may be an issue that handling the interrupts from
VM faults is too slow and the interrupt handler (IH) ring may
overflow, which can cause an eventual hang.
Delegate the processing of all VM faults to the soft
IRQ handler ring.
As a result, we spend much less time in the IRQ handler that
interacts with the HW IH ring, which significantly reduces the
chance of hangs/reboots.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call amdgpu_vm_update_fault_cache on GMC v6 similarly to how we
do in GMC v7-v8 so that VM fault info can be used later by
userspace for debugging.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VM_CONTEXT1_PROTECTION_FAULT_MCCLIENT register
doesn't exist on GMC v6 so we can't print the MC client as a
string like we do on GMC v7-v8. However, we still print the
mc_id from VM_CONTEXT1_PROTECTION_FAULT_STATUS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v8
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v7 (CIK)
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are going to use the soft IRQ handler ring on GMC v6 (SI)
to process interrupts from VM faults.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a typo in a comment, change "enviroment" to "environment" in
drivers/gpu/drm/amd/display/dc/dml2/display_mode_core_structs.h
Fixes: e6a8a000cf ("drm/amd/display: Rename dml2 to dml2_0 folder")
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aditya Gollamudi <adigollamudi@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW]
Before enable smart power OLED, we need to call set pipe to let
DMUB get correct ABM config.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
DVI-A & VGA connectors are applicable to DCE ASICs, so move them to
dce110_hwseq.c to block audio sync on SIGNAL_TYPE_RGB for DCE ASICs.
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users of ttm entities need to hold the gtt_window_lock before using them
to guarantee proper ordering of jobs.
Cc: stable@vger.kernel.org
Fixes: cb5cc4f573 ("drm/amdgpu: improve debug VRAM access performance using sdma")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the board supports IP discovery, we don't need to
parse the gpu info firmware.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4721
Fixes: fa819e3a7c ("drm/amdgpu: add support for cyan skillfish gpu_info")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CPER ring debugfs read code always writes a 12-byte header when the
file is read for the first time (*offset == 0):
copy_to_user(buf, ring_header, 12);
But the code never checks whether the user buffer (@size) is at least
12 bytes long. After writing the 12-byte header, the code then gives the
full original @size to the CPER payload handler:
record_req->buf_size = size;
This means the function can write:
12 bytes (header) + payload bytes (up to @size)
into a buffer that is only @size bytes big. In other words, the kernel
may write more data than the user asked for. This can overflow the user
buffer.
The fix is:
- If the user buffer is smaller than 12 bytes on the first read,
return -EINVAL instead of copying the header.
- After writing the 12-byte header, subtract 12 from @size and pass
the reduced size to record_req->buf_size. This ensures the CPER
payload only uses the remaining free space in the buffer.
Reads after the first one (*offset != 0) do not write the header, so
their behavior stays exactly the same. The only user-visible change is
that tiny buffers now fail safely instead of risking an overflow.
Fixes:
drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c:523
amdgpu_ras_cper_debugfs_read()
warn: userbuf overflow? is 'ring_header_size' <= 'size'
Fixes: 527e3d4033 ("drm/amd/ras: Add CPER ring read for uniras")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Xiang Liu <xiang.liu@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ensure the userq TLB flush is emitted only after
the VM update finishes and the PT BOs have been
annotated with bookkeeping fences.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
XCD id is assigned to uuid, which causes some performance
drop in SPX mode, assigning AID back will resolve the
issue.
Fixes: 3a75edf93a ("drm/amdkfd: set uuid for each partition in topology")
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Fix the typo of the else-if condition from ATOM_DEVICE_CRT1_SUPPORT to
ATOM_DEVICE_CRT2_SUPPORT.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW]
If cursor attributes or position are passed into DC via a stream update
and we take the newer HWSS paths then it's possible that the update
races with cursor offloading if it's enabled.
This can cause the cursor to remain on the screen if no further updates
come in if it results in HW cursor support being disabled.
[HOW]
Add the abort into the HWSS path so that cursor offloading doesn't
attempt to reprogram the cursor with outdated params.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When monitor is still booting EDID read can fail while DPCD read
is successful. In this case no EDID data will be returned, and this
could happen for a while.
[HOW]
Increase number of attempts to read EDID in dm_helpers_read_local_edid()
to 25.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dereferences amdgpu_dm_connector->dc_link early to
initialize verified_link_cap and dc, but later still checks
amdgpu_dm_connector->dc_link for NULL in the analog path.
This late NULL check is redundant, introduce a local dc_link pointer,
use it consistently, and drop the superfluous NULL check while using
dc_link->link_id.id instead.
The function uses dc_link at the very beginning without checking if it
is NULL. But later in the code, it suddenly checks if dc_link is NULL.
This check is too late to be useful, because the code has already used
dc_link earlier. So this NULL check does nothing.
We simplify the code by storing amdgpu_dm_connector->dc_link in a local
dc_link variable and using it throughout the function. Since dc_link is
already dereferenced early, the later NULL check is unnecessary and is
removed.
Fixes the below:
amdgpu_dm_connector_get_modes():
variable dereferenced before check 'amdgpu_dm_connector->dc_link'
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c
8845 &amdgpu_dm_connector->dc_link->verified_link_cap;
8846 const struct dc *dc = amdgpu_dm_connector->dc_link->dc;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Dereference
...
8856
8857 if (amdgpu_dm_connector->dc_sink &&
8858 amdgpu_dm_connector->dc_link &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Checked too late.
Presumably this NULL check could be removed?
...
Fixes: d46e422f65 ("drm/amd/display: Cleanup uses of the analog flag")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Timur Kristóf <timur.kristof@gmail.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When a laptop lid is closed the connector is disabled but userspace
can still try to change brightness. This doesn't work because the
panel is turned off. It will eventually time out, but there is a lot
of stutter along the way.
[How]
Iterate all connectors to check whether the matching one for the backlight
index is enabled.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4675
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields
of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the
ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4
then the last bit is always 1 so this code always sets .H_SYNC_POLARITY
and .V_SYNC_POLARITY to true.
This code is instead intended to check if the ATOM_HSYNC_POLARITY or
ATOM_VSYNC_POLARITY flags are set and reverse the result. In other
words, it's supposed to be a logical negate instead of a bitwise negate.
Fixes: ae79c310b1 ("drm/amd/display: Add DCE12 bios parser support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we're leaking memory.
Fixes: db36632ea5 ("drm/amdgpu: clean up and unify hw fence handling")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If memory is freed we need to nullify the pointer or the caller
might call kfree again (eg: amdgpu_cs_parser_fini calls kfree on
all non-null job pointers).
Fixes: db36632ea5 ("drm/amdgpu: clean up and unify hw fence handling")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
- make pp_table invisible on VF mode (only valid on BM)
- make pp_table invisible on Mi* chips (Not supported)
- make pp_table invisible if scpm feature is enabled.
v2:
move pp_table invisible code logic into amdgpu_dpm_get_pp_table() function.
v3:
add table buffer pointer check both on powerplay & swsmu.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original patch introduced additional latency during boot time
because it triggers a driver reload to avoid a CP hang when the driver
is reloaded multiple times. This has been addressed with a more generic
solution that triggers the GPU reset only during the unload phase,
avoiding extra latency during boot time. For this reason, this commit
reverts the original change.
This reverts commit 72a98763b4.
This patch should only be applied if commit:
4355e61835e7 ("drm/amdgpu: Fix GFX hang on SteamDeck when amdgpu is reloaded")
is present.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When trying to unload amdgpu in the SteamDeck (TTY mode), the following
set of errors happens and the system gets unstable:
[..]
[drm] Initialized amdgpu 3.64.0 for 0000:04:00.0 on minor 0
amdgpu 0000:04:00.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on gfx_0.0.0 (-110).
amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110).
[..]
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
[..]
When the driver initializes the GPU, the PSP validates all the firmware
loaded, and after that, it is not possible to load any other firmware
unless the device is reset. What is happening in the load/unload
situation is that PSP halts the GC engine because it suspects that
something is amiss. To address this issue, this commit ensures that the
GPU is reset (mode 2 reset) in the unload sequence.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reserve vm invalidation engine 6 when uni_mes enabled. It
is used in processing tlb flush request from host.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MMIO_REMAP BO is a special 4K IO page that does not have a ttm_tt
behind it. However, amdgpu_ttm_tt_pde_flags() was treating it like
normal TT/doorbell/preempt memory and unconditionally accessed
ttm->caching. For the MMIO_REMAP BO, ttm is NULL, so this leads to a
NULL pointer dereference when computing PDE flags.
Fix this by checking that ttm is non-NULL before reading ttm->caching.
This prevents the crash for MMIO_REMAP and also makes the code more
defensive if other BOs ever come through without a ttm_tt.
Fixes: fb5a52dbe9 ("drm/amdgpu: Implement TTM handling for MMIO_REMAP placement")
Suggested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Tested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes sparse mappings (aka. partially resident textures).
Check the correct flags.
Since a recent refactor, the code works with uAPI flags (for
mapping buffer objects), and not PTE (page table entry) flags.
Fixes: 6716a823d1 ("drm/amdgpu: rework how PTE flags are generated v3")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Accoreding to CP updated to RS64 on gfx11,
WRITE_DATA with PREEMPTION_META_MEMORY(dst_sel=8) is illegal for CP FW.
That packet is used for MCBP on F32 based system.
So it would lead to incorrect GRBM write and FW is not handling that
extra case correctly.
[How]
With gfx11 rs64 enabled, skip emit de meta data.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the suspend sequence VPE is already going to be power gated
as part of vpe_suspend(). It's unnecessary to call during calls to
amdgpu_device_set_pg_state().
It actually can expose a race condition with the firmware if s0i3
sequence starts as well. Drop these calls.
Cc: Peyton.Lee@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of checking that the signal is analog before calling the
HWSS disable_audio_stream() function to disable audio, move
the check inside the HWSS function.
Suggested-by: Ray Wu <Ray.Wu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20251113163348.137315-5-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match pre-existing patterns in the DC code base.
Instead of returning early from the construct_phy() function,
add a label at the end and use goto to jump there.
Additionally, respect the DC logger and let it log the function
even when it returns early.
Suggested-by: Ray Wu <Ray.Wu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20251113163348.137315-4-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the detect_link_and_local_sink() function, do not modify the
EDID capabilities of the display based on the connector. Instead,
respect the analog flag better and when the analog flag is set,
check that the connector indeed supports analog displays.
Suggested-by: Ray Wu <Ray.Wu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20251113163348.137315-3-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following warning that some users are reporting
with some kernel configurations:
"positional initialization of field in 'struct' declared
with 'designated_init' attribute"
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20251113163348.137315-2-timur.kristof@gmail.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete the attempt to progress the queue when checking if fence is
signaled. This avoids deadlock.
dma-fence_ops::signaled can be called with the fence lock in unknown
state. For radeon, the fence lock is also the wait queue lock. This can
cause a self deadlock when signaled() tries to make forward progress on
the wait queue. But advancing the queue is unneeded because incorrectly
returning false from signaled() is perfectly acceptable.
Link: https://github.com/brave/brave-browser/issues/49182
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4641
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Robert McClinton <rbmccav@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change comments from kernel-doc style "/**" to normal C comments
"/*" since the comments are not in kernel-doc format.
This fixes around 39 kernel-doc warnings like this one:
drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c:1322: warning:
This comment starts with '/**', but isn't a kernel-doc comment.
Refer Documentation/doc-guide/kernel-doc.rst
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511062036.Ry8Z2APc-lkp@intel.com/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Add interface to capture expected HW state from SW state
- Add panel Replay capability detection, DPCD reading, and enablement logic
- Re-check seamless boot enablement on subsequent dc_commit_streams
- Improve DPCD link capability retrieval with increased retries and per-retry delays
- Add HPD filter for HDMI
- Add pipe topology history tracking to DC
- Fix MST initialization on resume when switching from SST to MST during suspend
- Fix double cursor on DCN20 & DCN30 in non-native scaling
- Check DCCG_AUDIO_DTO2 register mask before access
- Fix pbn to kbps conversion
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Ignore Coverity false positive analysis in the dmub_cmd.h
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Existing routine has two conversion sequence,
pbn_to_kbps and kbps_to_pbn with margin.
Non of those has without-margin calculation.
kbps_to_pbn with margin conversion includes
fec overhead which has already been included in
pbn_div calculation with 0.994 factor considered.
It is a double counted fec overhead factor that causes
potential bw loss.
[How]
Add without-margin calculation.
Fix fec overhead double counted issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3735
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Check DCCG_AUDIO_DTO2 register mask exist before access.
Also, add a existing DIO_CLOCK_control register for later use.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Check that the stream exists to add link->local_sink null pointer access
protection.
Reviewed-by: Harold Sun <harold.sun@amd.com>
Reviewed-by: Ethan Cheung <ethan.cheung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and
cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5,
while it's still powered on, the cached cursor_state
(dpp_base->pos.cur0_ctl.bits.cur0_enable)
and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a
double cursor in full screen with non-native scaling.
[How]
Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no way to check pipe topology update history through a
dump.
[How]
Add a topology history structure to dc with snapshots of the most recent
pipe topology updates.
Reviewed-by: George Shen <george.shen@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
