Page reclamation interfaces were introduced in GuC firmware version
70.31.0 (which corresponds to GuC ABI version 1.14.0), but since this
feature is also available for the VFs and VFs don't know the firmware
version, use GuC compatibility version check instead.
Fixes: 77ebc7c10d ("drm/xe/guc: Add page reclamation interface to GuC")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Brian Nguyen <brian3.nguyen@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251215170433.196398-1-michal.wajdeczko@intel.com
LNL has been out long enough that all of our internal usage of
pre-production hardware has been phased out and we no longer need to
maintain workarounds that were exclusive to pre-production parts.
Production LNL hardware always has B0 or later steppings for both
graphics and media IP. Eliminate all workarounds that were exclusive to
A-step hardware and set the 'has_prod_wa_only' device flag for LNL to
make sure we warn and taint if someone tries to load the driver on an
old pre-production part.
Bspec: 70821
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251212181411.294854-4-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When we're initially enabling driver support for a new platform/IP, we
usually implement all workarounds documented in the WA database in the
driver. Many of those workarounds are restricted to early steppings
that only showed up in pre-production hardware (i.e., internal test
chips that are not available to the general public). Since the
workarounds for early, pre-production steppings tend to be some of the
ugliest and most complicated workarounds, we generally want to eliminate
them and simplify the code once the platform has launched and our
internal usage of those pre-production parts have been phased out.
Let's add a flag to the device info that tracks which platforms still
have support for pre-production workarounds for so that we can print a
warning and taint if someone tries to load the driver on a
pre-production part for a platform without pre-production workarounds.
This will help our internal users understand the likely problems they'll
encounter if they try to load the driver on an old pre-production
device.
The Xe behavior here is similar to what we've done for many years on
i915 (see intel_detect_preproduction_hw()), except that instead of
manually coding up ranges of device steppings that we believe to be
pre-production hardware, Xe will use the hardware's own production vs
pre-production fusing status, which we can read from the FUSE2 register.
This fuse didn't exist on older Intel hardware, but should be present on
all platforms supported by the Xe driver.
Going forward, let's set the expectation that we'll start looking into
removing pre-production workarounds for a platform around the time that
platforms of the next major IP stepping are having their force_probe
requirement lifted. This timing is just a rough guideline; there may be
cases where some instances of pre-production parts are still being
actively used in CI farms, internal device pools, etc. and we'll need to
wait a bit longer for those to be swapped out.
v2:
- Fix inverted forcewake check
v3:
- Invert flag and add it to the platforms on which we still have
pre-prod workarounds. (Jani, Lucas)
v4:
- Avoid checking pre-production on VF since they don't have access to
the FUSE2 register.
Bspec: 78271, 52544
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251212181411.294854-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Allow for runtime modification to page reclamation feature through
debugfs configuration. This parameter will only take effect if the
platform supports the page reclamation feature by default.
v2:
- Minor comment tweaks. (Shuicheng)
- Convert to kstrtobool_from_user. (Michal)
- Only expose page reclaim file if page reclaim flag
initially supported and with that, remove
xe_match_desc usage. (Michal)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-22-brian3.nguyen@intel.com
There are additional hardware managed L2$ flushing such as the
transient display. In those scenarios, page reclamation is
unnecessary resulting in redundant cacheline flushes, so skip
over those corresponding ranges.
v2:
- Elaborated on reasoning for page reclamation skip based on
Tejas's discussion. (Matthew A, Tejas)
v3:
- Removed MEDIA_IS_ON due to racy condition resulting in removal of
relevant registers and values. (Matthew A)
- Moved l3 policy access to xe_pat. (Matthew A)
v4:
- Updated comments based on previous change. (Tejas)
- Move back PAT index macros to xe_pat.c.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-21-brian3.nguyen@intel.com
Add page reclamation action to tlb inval backend. The page reclamation
action is paired with range tlb invalidations so both are issued at the
same time.
Page reclamation will issue the TLB invalidation with an invalid seqno
and a H2G page reclamation action with the fence's corresponding seqno
and handle the fence accordingly on page reclaim action done handler.
If page reclamation fails, tlb timeout handler will be responsible for
signalling fence and cleaning up.
v2:
- add send_page_reclaim to patch.
- Remove flush_cache and use prl_sa pointer to determine PPC flush
instead of explicit bool. Add NULL as fallback for others. (Matthew B)
v3:
- Add comments for flush_cache with media.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-20-brian3.nguyen@intel.com
Use page reclaim list as indicator if page reclaim action is desired and
pass it to tlb inval fence to handle.
Job will need to maintain its own embedded copy to ensure lifetime of
PRL exist until job has run.
v2:
- Use xe variant of WARN_ON (Michal)
v3:
- Add comments for PRL tile handling and flush behavior with media.
(Matthew Brost)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-19-brian3.nguyen@intel.com
Page reclamation feature needs the PRL to be suballocated into a
GGTT-mapped BO. On allocation failure, fallback to default tlb
invalidation with full PPC flush.
PRL's BO allocation is managed in separate pool to ensure 4K alignment
for proper GGTT address.
With BO, pass into TLB invalidation backend and modify fence to
accomadate accordingly.
v2:
- Removed page reclaim related variables from TLB fence. (Matthew B)
- Allocate PRL bo size to num_entries. (Matthew B)
- Move PRL bo allocation to tlb_inval run_job. (Matthew B)
v5:
- Use xe_page_reclaim_list_valid. (Matthew B)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-18-brian3.nguyen@intel.com
Page reclaim list (PRL) is preparation work for the page reclaim feature.
The PRL is firstly owned by pt_update_ops and all other page reclaim
operations will point back to this PRL. PRL generates its entries during
the unbind page walker, updating the PRL.
This PRL is restricted to a 4K page, so 512 page entries at most.
v2:
- Removed unused function. (Shuicheng)
- Compacted warning checking, update commit message,
spelling, etc. (Shuicheng, Matthew B)
- Fix kernel docs
- Moved PRL max entries overflow handling out from
generate_reclaim_entry to caller (Shuicheng)
- Add xe_page_reclaim_list_init for clarity. (Matthew B)
- Modify xe_guc_page_reclaim_entry to use macros
for greater flexbility. (Matthew B)
- Add fallback for PTE outside of page reclaim supported
4K, 64K, 2M pages (Matthew B)
- Invalidate PRL for early abort page walk.
- Removed page reclaim related variables from tlb fence
(Matthew Brost)
- Remove error handling in *alloc_entries failure. (Matthew B)
v3:
- Fix NULL pointer dereference check.
- Modify reclaim_entry to QW and bitfields accordingly. (Matthew B)
- Add vm_dbg prints for PRL generation and invalidation. (Matthew B)
v4:
- s/GENMASK/GENMASK_ULL && s/BIT/BIT_ULL (CI)
v5:
- Addition of xe_page_reclaim_list_is_new() to avoid continuous
allocation of PRL if consecutive VMAs cause a PRL invalidation.
- Add xe_page_reclaim_list_valid() helpers for clarity. (Matthew B)
- Move xe_page_reclaim_list_entries_put in
xe_page_reclaim_list_invalidate.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-17-brian3.nguyen@intel.com
Add page reclamation related changes to GuC interface, handlers, and
senders to support page reclamation.
Currently TLB invalidations will perform an entire PPC flush in order to
prevent stale memory access for noncoherent system memory. Page
reclamation is an extension of the typical TLB invalidation
workflow, allowing disabling of full PPC flush and enable selective PPC
flushing. Selective flushing will be decided by a list of pages whom's
address is passed to GuC at time of action.
Page reclamation interfaces require at least GuC FW ver 70.31.0.
v2:
- Moved send_page_reclaim to first patch usage.
- Add comments explaining shared done handler. (Matthew B)
- Add FW version fallback to disable page reclaim
on older versions. (Matthew B, Shuicheng)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-16-brian3.nguyen@intel.com
Starting from Xe3p, HW adds a feature assisting range based page
reclamation. Introduce a bit in device info to indicate whether
device has such capability.
Signed-off-by: Oak Zeng <oak.zeng@intel.com>
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-15-brian3.nguyen@intel.com
Allow tlb_invalidation to control when driver wants to flush the
Private Physical Cache (PPC) as a process of the tlb invalidation
process.
Default behavior is still to always flush the PPC but driver now has the
option to disable it.
v2:
- Revise commit/kernel doc descriptions. (Shuicheng)
- Remove unused function. (Shuicheng)
- Remove bool flush_cache parameter from fence,
and various function inputs. (Matthew B)
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-14-brian3.nguyen@intel.com
Certain TLB invalidation operations send multiple H2G messages per seqno
with only the final H2G containing the valid seqno - the others carry an
invalid seqno. The G2H handler drops these invalid seqno to aovid
prematurely signaling a TLB invalidation fence.
With TLB_INVALIDATION_SEQNO_INVALID used to indicate in progress
multi-step TLB invalidations, reset tdr to ensure that timeout
won't prematurely trigger when G2H actions are still ongoing.
v2: Remove lock from xe_tlb_inval_reset_timeout. (Matthew B)
v3: Squash with dependent patch from Matthew Brost' series.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251212213225.3564537-13-brian3.nguyen@intel.com
During GT reset recovery in do_gt_restart(), xe_uc_start() was called
before xe_reg_sr_apply_mmio() restored engine-specific registers. This
created a race window where the scheduler could run jobs before hardware
state was fully restored.
This caused failures in eudebug tests (xe_exec_sip_eudebug@breakpoint-
waitsip-*) where TD_CTL register (containing TD_CTL_GLOBAL_DEBUG_ENABLE)
wasn't restored before jobs started executing. Breakpoints would fail to
trigger SIP entry because the debug enable bit wasn't set yet.
Fix by moving xe_uc_start() after all MMIO register restoration,
including engine registers and CCS mode configuration, ensuring all
hardware state is fully restored before any jobs can be scheduled.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Jan Maslak <jan.maslak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251210145618.169625-2-jan.maslak@intel.com
There are some corner cases where flushing transient
data may take slightly longer than the 150us timeout
we currently allow. Update the driver to use a 300us
timeout instead based on the latest guidance from
the hardware team. An update to the bspec to formally
document this is expected to arrive soon.
Fixes: c01c6066e6 ("drm/xe/device: implement transient flush")
Signed-off-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/0201b1d6ec64d3651fcbff1ea21026efa915126a.1765487866.git.jagmeet.randhawa@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Enable I2C controller for Crescent Island and while at it, rely on
has_i2c flag instead of manual platform checks.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251128084414.306265-1-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Add support to keep the group active after the primary queue is
destroyed. Instead of killing the primary queue during exec_queue
destroy ioctl, kill it when all the secondary queues of the group
are killed.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-34-niranjana.vishwanathapura@intel.com
Upon a job timeout, teardown the multi-queue group by
triggering TDR on all queues of the multi-queue group
and by skipping timeout checks in them.
v5: Ban the group while triggering TDR for the guc
reported errors
Add FIXME in TDR to take multi-queue group off HW
(Matt Brost)
v6: Trigger cleanup of group only for multi-queue case
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-32-niranjana.vishwanathapura@intel.com
To properly support soft light restore between batches
being arbitrated at the CFEG, PIPE_CONTROL instructions
have a new bit in the first DW, QUEUE_DRAIN_MODE. When
set, this indicates to the CFEG that it should only
drain the current queue.
Additionally we no longer want to set the CS_STALL bit
for these multi queue queues as this causes the entire
pipeline to stall waiting for completion of the prior
batch, preventing this soft light restore from occurring
between queues in a queue group.
v4: Assert !multi_queue where applicable (Matt Roper)
Bspec: 56551
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-29-niranjana.vishwanathapura@intel.com
As all queues of a multi queue group use the primary queue of the group
to interface with GuC. Hence there is a dependency between the queues of
the group. So, when primary queue of a multi queue group is cleaned up,
also trigger a cleanup of the secondary queues also. During cleanup, stop
and re-start submission for all queues of a multi queue group to avoid
any submission happening in parallel when a queue is being cleaned up.
v2: Initialize group->list_lock, add fs_reclaim dependency, remove
unwanted secondary queues cleanup (Matt Brost)
v3: Properly handle cleanup of multi-queue group (Matt Brost)
v4: Fix IS_ENABLED(CONFIG_LOCKDEP) check (Matt Brost)
Revert stopping/restarting of submissions on queues of the
group in TDR as it is not needed.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-28-niranjana.vishwanathapura@intel.com
Dump multi queue specific information in the guc exec queue
dump.
v2: Move multi queue related fields inside the multi_queue
sub-structure (Matt Brost)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-27-niranjana.vishwanathapura@intel.com
Support dynamic priority change for multi queue group queues via
exec queue set_property ioctl. Issue CGP_SYNC command to GuC through
the drm scheduler message interface for priority to take effect.
v2: Move is_multi_queue check to exec_queue layer and assert
is_multi_queue being set in guc submission layer (Matt Brost)
v3: Assert CGP_SYNC message length is valid (Matt Brost)
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-26-niranjana.vishwanathapura@intel.com
This patch adds support for exec_queue set_property ioctl.
It is derived from the original work which is part of
https://patchwork.freedesktop.org/series/112188/
Currently only DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY
property can be dynamically set.
v2: Check for and update kernel-doc which property this ioctl
supports (Matt Brost)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-25-niranjana.vishwanathapura@intel.com
Only MULTI_QUEUE_PRIORITY property is valid for secondary queues of a
multi queue group. MULTI_QUEUE_PRIORITY only applies to multi queue group
queues. Detect invalid user queue property setting and return error.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-24-niranjana.vishwanathapura@intel.com
Add support for queues of a multi queue group to set
their priority within the queue group by adding property
DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE_PRIORITY.
This is the only other property supported by secondary
queues of a multi queue group, other than
DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE.
v2: Add kernel doc for enum xe_multi_queue_priority,
Add assert for priority values, fix includes and
declarations (Matt Brost)
v3: update uapi kernel-doc (Matt Brost)
v4: uapi change due to rebase
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-23-niranjana.vishwanathapura@intel.com
Implement GuC commands and response along with the Context
Group Page (CGP) interface for multi queue support.
Ensure that only primary queue (q0) of a multi queue group
communicate with GuC. The secondary queues of the group only
need to maintain LRCA and interface with drm scheduler.
Use primary queue's submit_wq for all secondary queues of a multi
queue group. This serialization avoids any locking around CGP
synchronization with GuC.
v2: Fix G2H_LEN_DW_MULTI_QUEUE_CONTEXT value, add more comments
(Matt Brost)
v3: Minor code refactro, use xe_gt_assert
v4: Use xe_guc_ct_wake_waiters(), remove vf recovery support
(Matt Brost)
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-22-niranjana.vishwanathapura@intel.com
Multi Queue is a new mode of execution supported by the compute and
blitter copy command streamers (CCS and BCS, respectively). It is an
enhancement of the existing hardware architecture and leverages the
same submission model. It enables support for efficient, parallel
execution of multiple queues within a single context. All the queues
of a group must use the same address space (VM).
The new DRM_XE_EXEC_QUEUE_SET_PROPERTY_MULTI_QUEUE execution queue
property supports creating a multi queue group and adding queues to
a queue group. All queues of a multi queue group share the same
context.
A exec queue create ioctl call with above property specified with value
DRM_XE_SUPER_GROUP_CREATE will create a new multi queue group with the
queue being created as the primary queue (aka q0) of the group. To add
secondary queues to the group, they need to be created with the above
property with id of the primary queue as the value. The properties of
the primary queue (like priority, timeslice) applies to the whole group.
So, these properties can't be set for secondary queues of a group.
Once destroyed, the secondary queues of a multi queue group can't be
replaced. However, they can be dynamically added to the group up to a
total of 64 queues per group. Once the primary queue is destroyed,
secondary queues can't be added to the queue group.
v2: Remove group->lock, fix xe_exec_queue_group_add()/delete()
function semantics, add additional comments, remove unused
group->list_lock, add XE_BO_FLAG_GGTT_INVALIDATE for cgp bo,
Assert LRC is valid, update uapi kernel doc.
(Matt Brost)
v3: Use XE_BO_FLAG_PINNED_LATE_RESTORE/USER_VRAM/GGTT_INVALIDATE
flags for cgp bo (Matt)
v4: Ensure queue is not a vm_bind queue
uapi change due to rebase
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-21-niranjana.vishwanathapura@intel.com
Add multi_queue_enable_mask field to the gt information structure
which is bitmask of all engine classes with multi queue support
enabled.
v2: Rename multi_queue_enable_mask to multi_queue_engine_class_mask
(Matt Brost)
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251211010249.1647839-20-niranjana.vishwanathapura@intel.com
During VF_RESTORE or VF_RESUME, the GuC sends a migration interrupt and
clears the RESFIX_START marker. If migration or resume occurs before the
VF issues its own RESFIX_START, VF KMD may receive two back-to-back
migration interrupts. VF then sends RESFIX_START to indicate the beginning
of fixups and RESFIX_DONE to mark completion. However, the second
RESFIX_START fails because the GuC is already in the RUNNING state.
Clear the recovery_queued flag after sending a RESFIX_START message to
ignore duplicated IRQs seen before we start actual recovery.
This ensures the state is reset only after the fixup process begins,
avoiding redundant work item queuing.
Fixes: b5fbb94341 ("drm/xe/vf: Introduce RESFIX start marker support")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251210052546.622809-6-satyanarayana.k.v.p@intel.com
Ensure VF migration recovery work is only queued when no recovery is
already queued and teardown is not in progress.
Fixes: b47c0c07c3 ("drm/xe/vf: Teardown VF post migration worker on driver unload")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251210052546.622809-5-satyanarayana.k.v.p@intel.com
Some Xe bos are allocated with extra backing-store for the CCS
metadata. It's never been the intention to share the CCS metadata
when exporting such bos as dma-buf. Don't include it in the
dma-buf sg-table.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20251209204920.224374-1-thomas.hellstrom@linux.intel.com
The GT stats interface is extended to include counters of how many
queues are either interrupted or waited on in the hardware engine
groups. This can help application debugging.
v2: Rename to queue as those operations are queue-based (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251210165000.60789-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
MEI GSC interrupt comes from i915 or xe driver. It has top half and
bottom half. Top half is called from i915/xe interrupt handler. It
should be in irq disabled context.
With RT kernel(PREEMPT_RT enabled), by default IRQ handler is in
threaded IRQ. MEI GSC top half might be in threaded IRQ context.
generic_handle_irq_safe API could be called from either IRQ or
process context, it disables local IRQ then calls MEI GSC interrupt
top half.
This change fixes B580 GPU boot issue with RT enabled.
Fixes: e02cea83d3 ("drm/xe/gsc: add Battlemage support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251107033152.834960-1-junxiao.chang@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
v2 survivability breadcrumbs introduces a new mode called
SPI Flash Descriptor Override mode (FDO). This is enabled by
PCODE when MEI itself fails and firmware cannot be updated via
MEI using igsc. This mode provides the ability to update
the firmware directly via SPI driver.
Xe KMD initializes the nvm aux driver if FDO mode is enabled.
Userspace should check FDO mode entry in survivability info sysfs before
using the SPI driver to update firmware.
/sys/bus/pci/devices/<device>/survivability_info/fdo_mode
v2 also supports survivability mode for critical boot errors.
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251208084539.3652902-6-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Redesign survivability mode to have only one value per file.
1) Retain the survivability_mode sysfs to indicate the type
cat /sys/bus/pci/devices/0000\:03\:00.0/survivability_mode
(Boot / Runtime)
2) Add survivability_info directory to expose boot breadcrumbs.
Entries in survivability mode sysfs are only visible when
boot breadcrumb registers are populated.
/sys/bus/pci/devices/0000:03:00.0/survivability_info
├── aux_info0
├── aux_info1
├── aux_info2
├── aux_info3
├── aux_info4
├── capability_info
├── postcode_trace
└── postcode_trace_overflow
Capability Info:
Provides data about boot status and has bits that
indicate the support for the other breadcrumbs
Postcode Trace / Postcode Trace Overflow :
Each postcode is represented as an 8-bit value and represents
a boot failure event. When a new failure event is logged by Pcode
the existing postcodes are shifted left. These entries provide a
history of 8 postcodes.
Auxiliary Info:
Some failures have additional debug information.
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251208084539.3652902-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If wait for ring space started just before migration, it can delay
the recovery process, by waiting without bailout path for up to 2
seconds.
Two second wait for recovery is not acceptable, and if the ring was
completely filled even without the migration temporarily stopping
execution, then such a wait will result in up to a thousand new jobs
(assuming constant flow) being added while the wait is happening.
While this will not cause data corruption, it will lead to warning
messages getting logged due to reset being scheduled on a GT under
recovery. Also several seconds of unresponsiveness, as the backlog
of jobs gets progressively executed.
Add a bailout condition, to make sure the recovery starts without
much delay. The recovery is expected to finish in about 100 ms when
under moderate stress, so the condition verification period needs to be
below that - settling at 64 ms.
The theoretical max time which the recovery can take depends on how
many requests can be emitted to engine rings and be pending execution.
While stress testing, it was possible to reach 10k pending requests
on rings when a platform with two GTs was used. This resulted in max
recovery time of 5 seconds. But in real life situations, it is very
unlikely that the amount of pending requests will ever exceed 100,
and for that the recovery time will be around 50 ms - well within our
claimed limit of 100ms.
Fixes: a4dae94aad ("drm/xe/vf: Wakeup in GuC backend on VF post migration recovery")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251204200820.2206168-1-tomasz.lis@intel.com
The xe3p_xpc platform supports Indirect Ring State and
it is required for the upcoming multi-queue feature.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251204063451.1180387-2-niranjana.vishwanathapura@intel.com
The newly introduced "reasons" attribute already signifies possible
reasons for throttling and makes the prefix in individual attribute
names redundant while emitting them as an array. Skip the prefix.
Fixes: 83ccde67a3 ("drm/xe/gt_throttle: Avoid TOCTOU when monitoring reasons")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Sk Anirban <sk.anirban@intel.com>
Link: https://patch.msgid.link/20251203123355.571606-1-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
G2H credits should be in fully idle state when runtime suspending GuC CT.
Assert on mismatch.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20251202083334.554045-1-raag.jadav@intel.com
The existing "pat" debugfs node dumps the live PAT registers. Under
SR-IOV the VF cannot touch those registers, so the file vanishes and
users lose all PAT visibility. Add a VF-safe "pat_sw_config" entry to
the VF-safe debugfs list. It prints the cached PAT table the driver
programmed, rather than poking HW, so PF and VF instances present the
same view.
This lets IGT and other tools query the PAT configuration without
carrying platform-specific tables or mirroring kernel logic.
v2: (Jonathan)
- Only append "(* = reserved entry)" to the PAT table header on Xe2+
platforms where it actually applies.
- Deduplicate the PTA/ATS mode printing by introducing the small
drm_printf_pat_mode() helper macro.
v3: (Matt)
- Print IDX[XE_CACHE_NONE_COMPRESSION] on every Xe2+ platform so the
dump always reflects the value the driver might use (even if it defaults
to 0) and future IP revisions don’t need extra condition tweaks.
v4:
- Drop the drm_printf_pat_mode macro and introduce a real helper
xe2_pat_entry_dump(). (Jani)
- Reuse the helper across all PTA/ATS/PAT dumps for xe2+ entries to keep
output format identical.
v5: (Matt)
- Split the original patch into two: one for refactoring helpers, one for
the new debugfs entry.
CC: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251205070633.28072-1-x.wang@intel.com
Move the PAT entry formatting into shared helper functions to ensure
consistency and enable code reuse.
This preparation is necessary for a follow-up patch that introduces a
software-based PAT dump, which is required for debugging on VFs where
hardware access is limited.
V2: (Matt)
- Xe3p XPC doesn’t define COMP_EN; omit it to match bspec and avoid
confusion.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251205070220.27859-1-x.wang@intel.com
Add new debugfs entry "guc_log_lfd", prepared for output guc log
in LFD(Log Format Descriptors) format.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-7-zhanjun.dong@intel.com
Add GuC crash dump data empty check. LFD will only include crash dump
section when data is not empty.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-6-zhanjun.dong@intel.com
