This patch adds support for the RT722 codec on SoundWire link 0,
and RT1320 left and right amplifiers on links 2 and 3, respectively.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111123737.246626-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adjust the error codes returned by the calibration debugfs files
to provide a wider range of errors and make them more consistent.
There is a limited number of standard errors and it's not always
easy to find an error code that accurately describes what happened.
Additionally, user code often uses strerror() or something similar
to report a generic error description. The original calibration
code used a limited set of errors to attempt to avoid user error
strings that would be confusing or unclear on a file read/write.
However, this restricts the ability to provide informative errors.
This limited error range didn't help very much with debugging so
it has been expanded, rather than worrying about what strerror()
would return.
The errors are now more consistent:
ENXIO Calibration is not supported by the driver.
EOPNOTSUPP The given calibration command is not supported.
EBUSY Cannot calibrate because the amp is playing audio.
ERANGE Calibration result was out-of-range.
ETIMEDOUT Calibration did not complete.
EMSGSIZE Blob written to cal_data is the wrong size.
ENODATA No calibration data available to read from cal_data,
or
Blob written to cal_data does not contain calibration,
or
No calibration data available to save to UEFI.
EIO General failure to communicate with the firmware, mainly
indicating that firmware controls are missing.
EINVAL Has its normal meaning that an invalid argument was passed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251110114327.84370-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Consolidate simple audio codec (one compatible string, one reg, one
optional reset-gpios and '#sound-dai-cells' 0) to a trivial-codec.yaml.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251031144622.4033833-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251106-restricted-pointers-stm-v1-1-7d03eb5020ba@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
During firmware download, if the size of the firmware is too small,
it wrongly assumes the firmware download is successful. If there is
size mismatch with chunk's header, invalid memory is accessed.
Fix these issues by throwing error during these cases.
Fixes: 4cc9bd8d7b (ASoc: tas2783A: Add soundwire based codec driver)
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202510291226.2R3fbYNh-lkp@intel.com/
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251030151637.566-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bus_find_device_by_name() function returns a device pointer with an
incremented reference count, but the original code was missing put_device()
calls in some return paths, leading to reference count leaks.
Fix this by ensuring put_device() is called before function exit after
bus_find_device_by_name() succeeds
This follows the same pattern used elsewhere in the kernel where
bus_find_device_by_name() is properly paired with put_device().
Found via static analysis and code review.
Fixes: 4f8ef33dd4 ("ASoC: soc_sdw_utils: skip the endpoint that doesn't present")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://patch.msgid.link/20251029071804.8425-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The probe function enables regulators at the beginning
but fails to disable them in its error handling path.
If any operation after enabling the regulators fails,
the probe will exit with an error, leaving the regulators
permanently enabled, which could lead to a resource leak.
Add a proper error handling path to call regulator_bulk_disable()
before returning an error.
Fixes: 9a397f4736 ("ASoC: cs4271: add regulator consumer support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251105062246.1955-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA specification uses Q7.8 volume format.
This patch adds a field to indicate whether it is SDCA volume control
and supports the volume settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251106093335.1363237-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Component drivers can prepare snd_pcm_hardware struct based on the hardware
capabilities which information should not be discarded.
Only touch the rates, channels_max and formats if they were left to 0,
otherwise keep the provided configuration intact for the parameter cross
checking decision.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251029073600.13624-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:
This patchset has 4 fixes and some enhancements to the Elite DSP driver
support.
Fixes includes
- setting correct flags for expected behaviour of appl_ptr
- fix closing of copp instances
- fix buffer alignment.
- fix state checks before closing asm stream
Enhancements include:
- adding q6asm_get_hw_pointer and ack callback support
- simplify code via __free(kfree) mechanism.
- use spinlock guards
- few cleanups discovered during doing above 2.
There is another set of updates comming soon, which will add support
for early memory mapping and few more modules support in audioreach.
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-20-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-17-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-16-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-15-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-14-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-13-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-12-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both capture and playback can have different runtimes, so set them
accordingly.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-10-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make use of q6asm_get_hw_pointer to get the current hardware read/write
pointer and remove any additional code that does calculate this manually.
As this is redundant and prone to errors.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-9-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently q6asm-dai is performing an extra layer of calculation on the hw_ptr,
which is always prone to errors and redundant.
q6asm already has tokens to indentify the pointer pointers which an be
used to get the hw_ptr and this is more accurate then doing the
artificial calculation at upper layers.
Add helper function q6asm_get_hw_pointer() to get this hw_ptr.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-8-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the existing code, we are only setting up one period at a time, in a
ping-pong buffer style. This triggers lot of underruns in the dsp
leading to jitter noise during audio playback.
Fix this by scheduling all available periods, this will ensure that the dsp
has enough buffer feed and ultimatley fixing the underruns and audio distortion.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For record path, multiple read requests are queued to dsp in advance.
However when data stream is closed, the pending read requests are rejected
by the dsp and a response is sent to the driver, this case is not handled
in the driver resulting in errors like below
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
This is same for both write and eos.
Fix this by allowing ASM_DATA_CMD_READ_V2, ASM_DATA_CMD_EOS and
ASM_DATA_CMD_WRITE_V2 as expected response.
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not stop a q6asm stream if its not started, this can result in
unnecessary dsp command which will timeout anyway something like below:
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: CMD 10bcd timeout
Fix this by correctly checking the state.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.
Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A matching Common object post processing instance is normally resused
across multiple streams. However currently we close this on DSP
even though there is a refcount on this copp object, this can result in
below error.
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
Fix this by addressing moving the adm_close to copp_kref destructor
callback.
Fixes: 7b20b2be51 ("ASoC: qdsp6: q6adm: Add q6adm driver")
Cc: Stable@vger.kernel.org
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not expect the appl_ptr to move backward and requires
explict sync. Make sure that the userspace does not do appl_ptr rewinds
by specifying the correct flags in pcm_info.
Without this patch, the result could be a forever loop as current logic assumes
that appl_ptr can only move forward.
Fixes: 3d4a4411aa ("ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
convert the Texas Instruments PCM186x Universal audio ADC bindings
to DT schema.
The PCM186x codec provides a single digital audio interface. Therefore
this binding adds a reference to dai-common.yaml and defines
'#sound-dai-cells = 0".
Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251104-dtbs-v7-1-224aacb09671@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS5822 is in same family with TAS58XX.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251104041314.792-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since snd_soc_suspend() is invoked through snd_soc_pm_ops->suspend(),
and snd_soc_pm_ops is associated with the soc_driver (defined in
sound/soc/soc-core.c), and there is no parent-child relationship between
the soc_driver and the DA7213 codec driver, the power management subsystem
does not enforce a specific suspend/resume order between the DA7213 driver
and the soc_driver.
Because of this, the different codec component functionalities, called from
snd_soc_resume() to reconfigure various functions, can race with the
DA7213 struct dev_pm_ops::resume function, leading to misapplied
configuration. This occasionally results in clipped sound.
Fix this by dropping the struct dev_pm_ops::{suspend, resume} and use
instead struct snd_soc_component_driver::{suspend, resume}. This ensures
the proper configuration sequence is handled by the ASoC subsystem.
Cc: stable@vger.kernel.org
Fixes: 431e040065 ("ASoC: da7213: Add suspend to RAM support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251104114914.2060603-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's a little bit cleaner to just pass "aw88261" instead of the address
of it "&aw88261".
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aQYKxl2f-zGVdYFC@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Just pass "aw87390" instead of the address of it. It's a bit simpler.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aQYKuQuKekmoUrHP@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
The two virtual multiplexers are now part of the alsa routing.
The "DMIC M1 Mux" now sits between the primary digital mics
"DMICL"/"DMICR" and the virtual multiplexer "DMIC Mux". And
"DMIC M2 Mux" sits between the secondary digital mics
"DMIC2L"/"DMIC2R" and the audio out interfaces
"AIFOUT2L"/"AIFOUT2R". This patch makes sure that the M1 and
M2 mics can be switched On/Off independently, by default both
will be enabled.
Signed-off-by: Sharique Mohammad <sharq0406@gmail.com>
Link: https://patch.msgid.link/20251103091648.771947-1-sharq0406@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct fsl_spdif_soc_data' and 'struct snd_kcontrol_new' are not modified
in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
53548 25576 128 79252 13594 sound/soc/fsl/fsl_spdif.o
After:
=====
text data bss dec hex filename
54828 24296 128 79252 13594 sound/soc/fsl/fsl_spdif.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/5fe08f028395a6c6f50d11eee8fdb4a90b1f68ab.1762151503.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
The two digital mics M1(primary digital mic) and M2(secondary digital
mic) work independently of one another. It means they could be switched
On or Off independently of one another. To control their On or Off
state, with this patch creating two virtual multiplexer widgets
"DMIC M1 Mux" and "DMIC M2 Mux", with two options "Enable" and "Disable".
Signed-off-by: Sharique Mohammad <sharq0406@gmail.com>
Link: https://patch.msgid.link/20251103091447.771793-1-sharq0406@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the text for firmware file naming to show that the l?u? suffix is
supported on CS35L56 B0 silicon and ampN was only used on early firmware.
The previous version of this text only said that B0 silicon used the ampN
suffix. Since kernel 6.16 the driver supports both the old ampN and
new l?u? suffix for B0 silicon. New firmwares will use the l?u? suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251103115809.33953-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
One new device ID for an Intel SoC.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF+eAACgkQJNaLcl1U
h9CUIwf+J+ii60TWW4Ye9rRy4QN5WjLLud9VTpVtLIVu54oXK4NxU+blTQ82AynB
291ZJ3sEHiO4PTi6ZAUsgKCZ+bCS0fE2XBJBH642yTyM1ixyFx/hs71rzE97OOA4
tQFAxJwJFRXIwTq4HEwBbxE1Oh0KFnBMQAo6lWx9rrtm+6BcUzYMXTwGYajLj3gj
vULpU6xpOuJ7H+LgM8W0pHVD4iGdqMUy/6qiknjmN5UKiormJxjBQzPSLgQis/7R
tSFO6dOfsQgEmlzIgBgHFtnikCNor6aA5bLOJgmPIemX9csQaejyZSpyAWSfZYdQ
28/yA4VemgiEddfeecpCMCd2s8vzQA==
=Y8Hn
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One new device ID for an Intel SoC"
* tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel: Add support for Oak Stream SPI serial flash
A simple fix for a missed part of an API conversion on the bd718x7 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF+isACgkQJNaLcl1U
h9CmJgf+MSainrAqu7SLLGYCA9P+dpUwxHoxWX5cpCMWFGNPGIg6hr9sDjxJuOXr
gQkUcSOzkFJgJ3WCphiOIUgXttRfYqk3/O2/LFn3Co0cdlnI8jTy5nTD7Ks4H8Aa
e2mUo+okFRMH2zYIOxDXzCwTgPuNc0glLSLTjFqc1pwghvPmgHqJEWbjVG560GbI
HBKrTCygFOIJT5LVMGXWFEh8IPTMdvDn4VFGqMwT9KaDx4DP+fYecfg8CEePHsRl
F+40J2URgUDFYMOInzMoWL91766q9euQTsywLWFS3KxKtll+19jF6oACdeA3cXZE
guR6V2zxzj8acpQ1REhCO11trAvLTw==
=beWy
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A simple fix for a missed part of an API conversion in the bd718x7
driver"
* tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: bd718x7: Fix voltages scaled by resistor divider
One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF/SEACgkQJNaLcl1U
h9BjXwgAgg3HM/oWn3aiWp8q9j58dSJb7pWD+GKdBS8lvBoOvmnHY9QnEOkBFmvV
Oa1vNiKVlRIsa0YRbswsvkB0Wt6F5vOaQ3WrZpVYpuF5xxyC/1b0AQTIiZhfZN2E
p46E1/VkCJNWdoJwqdIS9kWvZDHeA3BcCDwDc56FsgBE/25LNfVOPy/wxR0OU2dd
1LFGASCW9SRV6+xxCAb+FE/eLM/7RGvjIFiuh5flx/oPKfoqyQ5E1hjnrG5CJH0k
kI8mapifSFB2cd72SKdB/KywQVYmzkFQMQYUmHKiFWtqwql8A6TjAsmX/yJmdUI1
7OioR+sA6TGr4QNjUE/0NyrAotLs6A==
=1Osa
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations.
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum.
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds.
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=z2oz
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants
* tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Ensure clear_page() variants always have __kcfi_typeid_ symbols
x86/cpu: Add/fix core comments for {Panther,Nova} Lake
x86/CPU/AMD: Extend Zen6 model range
x86/build: Disable SSE4a
x86/fpu: Ensure XFD state on signal delivery
x86/CPU/AMD: Add RDSEED fix for Zen5
x86/microcode/AMD: Limit Entrysign signature checking to known generations
- Fix an out-of-bounds access on non-hybrid platforms in the
Intel PMU DS code, reported by KASAN.
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NYBY
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Miscellaneous fixes and CPU model updates:
- Fix an out-of-bounds access on non-hybrid platforms in the Intel
PMU DS code, reported by KASAN
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version"
* tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add uncore PMU support for Wildcat Lake
perf/x86/intel: Add PMU support for WildcatLake
perf/x86/intel: Fix KASAN global-out-of-bounds warning
