ASoC: cs35l56: Alter error codes for calibration routine

Adjust the error codes returned by the calibration debugfs files
to provide a wider range of errors and make them more consistent.

There is a limited number of standard errors and it's not always
easy to find an error code that accurately describes what happened.
Additionally, user code often uses strerror() or something similar
to report a generic error description. The original calibration
code used a limited set of errors to attempt to avoid user error
strings that would be confusing or unclear on a file read/write.
However, this restricts the ability to provide informative errors.

This limited error range didn't help very much with debugging so
it has been expanded, rather than worrying about what strerror()
would return.

The errors are now more consistent:

ENXIO       Calibration is not supported by the driver.
EOPNOTSUPP  The given calibration command is not supported.
EBUSY       Cannot calibrate because the amp is playing audio.
ERANGE      Calibration result was out-of-range.
ETIMEDOUT   Calibration did not complete.
EMSGSIZE    Blob written to cal_data is the wrong size.
ENODATA     No calibration data available to read from cal_data,
            or
            Blob written to cal_data does not contain calibration,
            or
            No calibration data available to save to UEFI.
EIO         General failure to communicate with the firmware, mainly
            indicating that firmware controls are missing.
EINVAL      Has its normal meaning that an invalid argument was passed.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251110114327.84370-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Richard Fitzgerald 2025-11-10 11:43:27 +00:00 committed by Mark Brown
parent 4acbfcf11c
commit 772ada5028
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
2 changed files with 25 additions and 7 deletions

View File

@ -265,6 +265,9 @@
#define CS35L56_PS3_POLL_US 500
#define CS35L56_PS3_TIMEOUT_US 300000
#define CS35L56_CAL_STATUS_SUCCESS 1
#define CS35L56_CAL_STATUS_OUT_OF_RANGE 3
#define CS35L56_CONTROL_PORT_READY_US 2200
#define CS35L56_HALO_STATE_POLL_US 1000
#define CS35L56_HALO_STATE_TIMEOUT_US 250000

View File

@ -1022,8 +1022,10 @@ static int cs35l56_perform_calibration(struct cs35l56_base *cs35l56_base)
return ret;
ret = cs35l56_wait_for_ps3(cs35l56_base);
if (ret)
if (ret) {
ret = -EBUSY;
goto err_pm_put;
}
regmap_update_bits_check(cs35l56_base->regmap, CS35L56_MIXER_NGATE_CH1_CFG,
CS35L56_AUX_NGATE_CHn_EN, 0, &ngate_ch1_was_enabled);
@ -1038,7 +1040,7 @@ static int cs35l56_perform_calibration(struct cs35l56_base *cs35l56_base)
if (!ctl) {
dev_err(cs35l56_base->dev, "Could not get %s control\n",
calibration_controls->status);
ret = -ENXIO;
ret = -EIO;
goto err;
}
@ -1050,12 +1052,15 @@ static int cs35l56_perform_calibration(struct cs35l56_base *cs35l56_base)
0, &val, sizeof(val));
if (ret < 0) {
dev_err(cs35l56_base->dev, "Could not write %s: %d\n", "CALI_NORM_EN", ret);
ret = -EIO;
goto err;
}
ret = cs35l56_mbox_send(cs35l56_base, CS35L56_MBOX_CMD_AUDIO_CALIBRATION);
if (ret)
if (ret) {
ret = -EIO;
goto err;
}
if (read_poll_timeout(cs_dsp_coeff_read_ctrl, ret,
(val == cpu_to_be32(1)),
@ -1065,16 +1070,24 @@ static int cs35l56_perform_calibration(struct cs35l56_base *cs35l56_base)
ctl, 0, &val, sizeof(val))) {
dev_err(cs35l56_base->dev, "Calibration timed out (CAL_STATUS: %u)\n",
be32_to_cpu(val));
ret = -ETIMEDOUT;
goto err;
switch (be32_to_cpu(val)) {
case CS35L56_CAL_STATUS_OUT_OF_RANGE:
ret = -ERANGE;
goto err;
default:
ret = -ETIMEDOUT;
goto err;
}
}
}
cs35l56_base->cal_data_valid = false;
memset(&cal_data, 0, sizeof(cal_data));
ret = cs_amp_read_cal_coeffs(dsp, calibration_controls, &cal_data);
if (ret)
if (ret) {
ret = -EIO;
goto err;
}
dev_info(cs35l56_base->dev, "Cal status:%d calR:%d ambient:%d\n",
cal_data.calStatus, cal_data.calR, cal_data.calAmbient);
@ -1141,7 +1154,7 @@ ssize_t cs35l56_calibrate_debugfs_write(struct cs35l56_base *cs35l56_base,
return ret;
break;
default:
return -ENXIO;
return -EOPNOTSUPP;
}
return count;
@ -1170,6 +1183,8 @@ ssize_t cs35l56_cal_ambient_debugfs_write(struct cs35l56_base *cs35l56_base,
goto out;
ret = cs_amp_write_ambient_temp(cs35l56_base->dsp, cs35l56_base->calibration_controls, val);
if (ret)
ret = -EIO;
out:
pm_runtime_put(cs35l56_base->dev);