bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes,
allocate with GFP_KERNEL, and wait for an RCU grace period.
bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as
well.
Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is
sleepable. That does not make every callback sleepable: a syscall program
can register a bpf_timer callback, and the verifier checks that callback
in a non-sleepable context while retaining the syscall helper set.
Without .might_sleep on the prototypes, such a callback can invoke
bpf_sys_bpf() from hrtimer softirq context and trigger a
scheduling-while-atomic failure. bpf_sys_close() is exposed through the
same missing context check.
Set .might_sleep on both prototypes so the existing helper-context check
rejects them from timer callbacks and other atomic regions. Calls from the
sleepable main body remain valid.
Fixes: 79a7f8bdb1 ("bpf: Introduce bpf_sys_bpf() helper and program type.")
Fixes: 3abea08924 ("bpf: Add bpf_sys_close() helper.")
Reported-by: Nicholas Carlini <npc@anthropic.com>
Suggested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260903144433.1716731-10-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
An mmap-able BPF array map (BPF_F_MMAPABLE) has its backing memory
vmalloc'ed up front at map creation time. array_map_mmap() then wired up
the whole mapping eagerly via remap_vmalloc_range(), which calls
vm_insert_page() for every page of the map. For large maps this makes
every mmap() O(number of pages): an 8MiB map inserts 2048 PTEs per
mmap() and tears them all down again on munmap(), even when user space
only touches a few pages (or none at all).
Populate the mapping lazily instead, the same way the arena map already
does. array_map_mmap() now only performs the bounds check and returns,
leaving the PTEs unpopulated; pages are inserted on demand by a new
array_map_mmap_fault() handler. Because the memory is already resident,
the fault handler simply resolves the vmalloc page and hands it to the
fault path. This makes mmap() O(1), and munmap() proportional to the
number of pages that were actually faulted in rather than to the size of
the map.
The handler is reached through a new optional ->map_mmap_fault callback.
Maps that provide it get a vm_operations_struct with a .fault handler;
maps that populate their mapping eagerly keep the one they had. Both
share the same open/close callbacks, so the existing VMA accounting
(VM_MAYWRITE write-active tracking, freeze handling) stays centralized
rather than each map installing its own vm_operations_struct.
Callers that want the pages populated up front can still request that
explicitly with MAP_POPULATE. Kernel-side access to the map (via the
vmalloc address) is unaffected.
Time for one mmap()+munmap() of an 8MiB mmap-able array map:
before after
no MAP_POPULATE, no access 226us 1.1us
no MAP_POPULATE, access all pages 236us 1341us
MAP_POPULATE, no access 312us 493us
MAP_POPULATE, access all pages 318us 519us
Mapping without touching the data, which is what this change targets,
gets ~160x cheaper. Faulting in the whole mapping one page at a time is
more expensive than the eager remap_vmalloc_range() loop, so users that
do touch every page should ask for MAP_POPULATE. Note that MAP_POPULATE
is not free before this change either: it adds ~85us (226us => 312us)
for no benefit, as the mapping is already fully populated.
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260814155623.111565-1-song@kernel.org
There are many adjacent blank lines in kernel/bpf/ that have accumulated
over time.
Drop them for cleanup.
No functional changes intended.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260813152324.97937-2-leon.hwang@linux.dev
Kfunc argument checking re-derives each argument's kfunc_ptr_arg_type
from BTF on every verification of a call in check_kfunc_args(). Now that
get_kfunc_arg_type() is a function of the kfunc's BTF alone, it no
longer inspects register state. The classification can be computed once
when the call is added and cached. This is a step toward describing
kfuncs with a bpf_func_proto and sharing the helper argument-checking
path.
Generate the classification at bpf_add_kfunc_call() time:
- Extend struct bpf_func_proto to be able to describe a kfunc: widen
arg_type[] and the arg_btf_id[]/arg_size[] union from 5 to
MAX_BPF_FUNC_ARGS, since a kfunc may take up to 12 arguments (5 in
registers, 7 on the stack).
- Embed a bpf_func_proto in struct bpf_kfunc_desc, populated by
gen_kfunc_arg_proto() which runs get_kfunc_arg_type() for each
argument and stores the result in proto.arg_type[]. Grow the
descriptor table's descs[] as a flexible array to not waste memory.
- check_kfunc_args() reads the cached classification from meta->fn
The KF_ARG_PTR_TO_CTX classification depends on the resolved program type,
and for BPF_PROG_TYPE_EXT that is the target program's type, which
resolve_prog_type() reads from prog->aux->saved_dst_prog_type. That field
is normally recorded later during verification in check_attach_btf_id(),
after bpf_add_kfunc_call() has run.
Record saved_dst_prog_type and saved_dst_attach_type from dst_prog at
program load time in bpf_prog_load() so the resolved type is available
at add-call time without reordering check_attach_btf_id(). This keeps
e.g. an freplace of an XDP program calling bpf_xdp_metadata_rx_hash()
classifying its struct xdp_md * argument as context.
The classification result is unchanged; it is only computed earlier and
cached.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-19-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
ARG_CONST_SIZE does not require a constant: check_mem_size_reg() accepts
any bounded scalar and verifies the memory access against its maximum
(reg_umax). Rename ARG_CONST_SIZE and ARG_CONST_SIZE_OR_ZERO to
ARG_MEM_SIZE and ARG_MEM_SIZE_OR_ZERO to reflect that. ARG_CONST_ALLOC_
SIZE_OR_ZERO, which does require a constant, is left unchanged.
Pure rename, no functional change.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-10-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Replace silent WARN_ON_ONCE with WARN_ONCE that prints the actual error
code from bpf_trampoline_unlink_prog(). This aids debugging of race
conditions during link teardown, while keeping the warning rate limited
to avoid log flooding.
This will be very helpful for speeding up trouble-shooting of some crash
UAF due to bpf_trampoline_unlink_prog failures.
No change to unlink behavior.
Signed-off-by: Xu Xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260729141159128mEJmS_aujBKr-cBu1p_UI@zte.com.cn
In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is
accessed without holding any locks. If the prog is concurrently replaced
via bpf_link_update, the old prog can be freed, leading to a potential
UAF issue.
Fix this by accessing link->prog under RCU protection to safely fetch
the pointer and guarantee its lifetime while reading its fields.
Fixes: 0c991ebc8c ("bpf: Implement bpf_prog replacement for an active bpf_cgroup_link")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/f87b53c0-8f00-45a6-82db-8242fa9b143f@huaweicloud.com [0]
Link: https://lore.kernel.org/bpf/20260728025457.2814876-1-pulehui@huaweicloud.com
Commit 5816bf4273 ("lsm,selinux: Add LSM blob support for BPF objects")
made the LSM hook wrappers for BPF object creation clean up the LSM
state internally upon denial, e.g. security_bpf_map_create() internally
calls security_bpf_map_free() when the bpf_map_create hook returns an
error. map_create() however still routes a denial to its free_map_sec
label, which invokes security_bpf_map_free() a second time, so the
bpf_map_free hook fires twice for a single denied map.
In-tree LSMs are unaffected in practice since the blob kfree() inside
security_bpf_map_free() is NULL-safe and idempotent and none of them
implement bpf_map_free, but a BPF LSM program attached to that hook
observes double invocations. Route the denial to free_map instead.
Fixes: 5816bf4273 ("lsm,selinux: Add LSM blob support for BPF objects")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260709073422.379247-1-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The signed gen_loader used to police its own metadata map from within
BPF: emit_signature_match() read the kernel-cached map->sha[] back
through hardcoded struct bpf_map offsets and compared it against a hash
that compute_sha_update_offsets() baked into the signed instructions,
after a BPF_OBJ_GET_INFO_BY_FD round-trip to populate map->sha[].
The kernel now verifies the metadata at BPF_PROG_LOAD time by folding
the frozen contents of the loader's exclusive fd_array maps into the
signature, so the loader no longer checks anything itself. Generated
loaders thus carry no verification logic of their own anymore: Nothing
in the signing chain depends on emitted loader bytecode doing the right
thing.
On the loading side, skel_internal.h now sets fd_array_cnt for a signed
load so the kernel scans fd_array for the exclusive metadata map -
still frozen, as the kernel requires - and the BPF_OBJ_GET_INFO_BY_FD
round-trip to populate map->sha[] is gone. The struct bpf_map layout
BUILD_BUG_ON()s on the kernel side are removed as well: they only
pinned the ABI for the in-BPF read of map->sha[] that is no longer
needed. Same for the map->excl member. Note: gen_hash is retained; it
still marks a loader as signed so an untrusted host cannot re-dimension
maps or override initial values now covered by the signature.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260708075343.358712-4-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
A signed gen_loader program carries the programs, maps and relocations
it installs in a metadata array map. The loader instructions are covered
by the PKCS#7 signature, but the metadata map is not: Today the loader
compares the map contents from within BPF against a hash baked into its
(signed) instructions, using the kernel-cached map hash. The kernel
itself never actually attests that the metadata the loader installs is
the metadata that was signed.
This split is the core of the long-standing objection to the BPF signing
scheme from the LSM / integrity side: the integrity check of a light
skeleton only completes once the loader program runs, that is, after the
security_bpf_prog_load() hook, so at admission time an LSM observes a
program whose payload has not yet been verified. Auditing the chain
link is also not a purely cryptographic operation: whoever signs or
reviews an lskel has to disassemble the loader's preamble to convince
themselves that the embedded hash check is present and correct [0][1].
Two acceptable fixes were identified in those threads: Complete the
integrity check before the admission hook fires, or add a second hook
that collects the verification result after the loader ran [2]. Covering
both the loader and its maps directly with the PKCS#7 signature is what
Blaise Boscaccy's patchsets proposed in several forms. Let's implement
the former, without growing the UAPI, and in particular as a single
unified scheme where the signature spans the raw bytes rather than
derived hashes.
A signed loader binds its metadata map(s) through the existing fd_array,
and an exclusive map is already bound to a program digest (excl_prog_hash).
So when a signature is present, collect the exclusive maps from fd_array
and append their frozen contents to the instructions before verification:
The signature now covers insns || metadata_0 || metadata_1 || [...] in
the fd_array order, and verification completes in bpf_check(), once the
fd_array maps are resolved into used_maps, before the LSM admission hook
and the rest of verification. A program is either BPF_SIG_UNSIGNED or
BPF_SIG_VERIFIED, with nothing in between. While folding the fd_array
maps, a non-exclusive map bound to a signed program is rejected, so every
map folded into the signature is exclusive. A signed loader that fails
to cover its metadata thus does not load, and BPF_SIG_VERIFIED always
means the instructions and every exclusive map are authentic. The maps
must be frozen so the hashed bytes cannot change before the loader runs;
the map <-> program digest binding is enforced by the verifier for every
used map. Binding maps through fd_array_cnt makes the verifier resolve
and excl-check them (excl_prog_sha vs prog->digest) before it would
otherwise compute the digest, so compute prog->digest up front in
bpf_check(), over the unmodified instructions the signature covers, for
a load that folds metadata.
Unsigned programs are not affected by the signature path; for them the
LSM admission hook merely moves below fd_array resolution, with minimal
bounded work in between. Note, signed loaders generated by older libbpf/
bpftool versions need to be regenerated; some of the recent fixes we've
had on the signed loader side require the latter already to close gaps.
Finally, some remarks around the security_bpf_prog_load() placement
given there was discussion on whether a new hook is needed or the existing
security_bpf_prog() hook should be reused [3]: For a new hook it would
mean that just for loading a single BPF program it has to pass through
four layers of LSM hooks:
1) security_bpf (cmd=PROG_LOAD): for gating various bpf subcmds
2) security_bpf_prog_load: historical admission hook (CAP/token,
prog_type, attach point), pre-verification
3) security_bpf_prog_verify_signature: newly asked admission hook,
same role as 2), plus the BPF signature verdict
4) security_bpf_prog: gate handing the prog fd back to userspace,
verification done & signature verified
The use-cases of 2) and 3) conflate, thus BPF community prefers to just
keep a total of 3 LSM hooks (as-is today): 3) makes 2) incoherent given
they are the /same class/ of hook, that is, access-control admission on
the load and split only by _what_ they can see. Worse, with the split,
for a signed BPF program security_bpf_prog_load 2) admits a program whose
signature has not been checked, so a policy gating at 2) is structurally
unable to express "admit only verified" and every such policy is forced
onto 3) *anyway*. In other words, one doesn't get two complementary hooks,
but rather, one real admission hook aka 3) plus a now-degraded /legacy/
hook 2) that can't answer the question operators actually want to ask.
Reusing security_bpf_prog() 4) for admission is no alternative either:
it fires only after the entire verifier (and JIT) pipeline ran, so
denying a not-yet-verified program at that point burns exactly the
work a denial is supposed to avoid, and by then the program has an id
assigned and the kallsyms/perf/audit load events fired. Policies are
free to also consume the signature verdict at 4), but admission control
belongs into security_bpf_prog_load(). Hence the latter remains the only
admission hook, merely moved past signature verification; with moving
large allocations further down into the BPF verifier, there is now only
minimal work between the old and new location: The preparation work in
bpf_check() is reordered such that only the minimally necessary setup
happens up front: Allocating the env, initializing the verifier log and
resolving the fd_array that a signed BPF metadata map needs. The worst
case allocation up until security_bpf_prog_load() is ~90K which is the
env itself (~54K) plus the continuous fd_array cache (at most 32K). The
insn_aux_data array is moved into a later stage in the verification.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/2f71d6c03698eb17d51f7247efde777627ee578a.camel@HansenPartnership.com [0]
Link: https://lore.kernel.org/lkml/ecf0521ed302db672672ebfbc670ecfba36a6e00.camel@HansenPartnership.com [1]
Link: https://lore.kernel.org/bpf/88703f00d5b7a779728451008626efa45e42db3d.camel@HansenPartnership.com [2]
Link: https://lore.kernel.org/bpf/DJOFY21DYUI4.19WKQ3NPZ4H5R@gmail.com [3]
Link: https://lore.kernel.org/bpf/20260708075343.358712-3-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
When struct prog_assoc_struct_ops was added,
BPF_PROG_ASSOC_STRUCT_OPS_LAST_FIELD referenced prog_fd instead of the
actual last field, flags.
Fixes: b5709f6d26 ("bpf: Support associating BPF program with struct_ops")
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260618040934.4113938-1-tweek@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow uprobe_multi link to identify the target binary by an already
opened file descriptor.
Adding new BPF_F_UPROBE_MULTI_PATH_FD flag and the path_fd field for
the attr.link_create.uprobe_multi struct.
When the flag is set, we resolve the target from path_fd, without the
flag, we keep the existing string path behavior.
I don't see a use case for supporting O_PATH file descriptors, because
we need to read the binary first to get probes offsets, so I'm using
the CLASS(fd, f), which fails for O_PATH fds.
Assisted-by: Codex:GPT-5.4
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260611114230.950379-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Map update and delete paths currently call bpf_obj_free_fields() when a
value is being replaced or recycled. That makes field destruction depend
on the context of the update/delete operation. For tracing programs this
can include NMI context, where referenced kptr destructors, uptr
unpinning, and graph root destruction are not generally safe.
Introduce bpf_obj_cancel_fields() for the reusable-value path. It only
performs NMI-safe cleanup for timer, workqueue, and task_work fields.
Fields that need full destruction are left attached to the recycled value
and are destroyed by the final cleanup path instead.
Switch array and hashtab update/delete/recycle paths to this cancel
helper. Keep bpf_obj_free_fields() for final map destruction and for
bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator
destructors, so teardown continues to walk the normal and extra elements
and fully destroy their fields.
This deliberately relaxes the eager-free semantics of map update/delete
for special fields. Programs that relied on a recycled map slot becoming
empty immediately after update/delete were relying on behavior that
cannot be implemented safely from every BPF execution context without
offloading arbitrary destructors.
There is a chance this change breaks programs making assumptions
regarding the eager freeing of fields. If so, we can relax semantics to
cancellation only when irqs_disabled() is true in the future. However,
theoretically, map values that get reused eagerly already have weaker
guarantees as parallel users can recreate freed fields before the new
element becomes visible again.
Fixes: 14a324f6a6 ("bpf: Wire up freeing of referenced kptr")
Signed-off-by: Justin Suess <utilityemal77@gmail.com>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260609202548.3571690-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to use session attachment with tracing_multi link.
Adding new BPF_TRACE_FSESSION_MULTI program attach type, that follows
the BPF_TRACE_FSESSION behaviour but on the tracing_multi link.
Such program is called on entry and exit of the attached function
and allows to pass cookie value from entry to exit execution.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new link to allow to attach program to multiple function
BTF IDs. The link is represented by struct bpf_tracing_multi_link.
To configure the link, new fields are added to bpf_attr::link_create
to pass array of BTF IDs;
struct {
__aligned_u64 ids;
__u32 cnt;
} tracing_multi;
Each BTF ID represents function (BTF_KIND_FUNC) that the link will
attach bpf program to.
We use previously added bpf_trampoline_multi_attach/detach functions
to attach/detach the link.
The linkinfo/fdinfo callbacks will be implemented in following changes.
Note this is supported only for archs (x86_64) with ftrace direct and
have single ops support.
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS &&
CONFIG_HAVE_SINGLE_FTRACE_DIRECT_OPS
Note using sort_r (instead of plain sort) in check_dup_ids, because we
will use the swap callback in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-14-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new program attach types multi tracing attachment:
BPF_TRACE_FENTRY_MULTI
BPF_TRACE_FEXIT_MULTI
and their base support in verifier code.
Programs with such attach type will use specific link attachment
interface coming in following changes.
This was suggested by Andrii some (long) time ago and turned out
to be easier than having special program flag for that.
Bpf programs with such types have 'bpf_multi_func' function set as
their attach_btf_id and keep module reference when it's specified
by attach_prog_fd.
They are also accepted as sleepable programs during verification,
and the real validation for specific BTF_IDs/functions will happen
during the multi link attachment in following changes.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-11-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that we split trampoline attachment object (bpf_tramp_node) from
the link object (bpf_tramp_link) we can use bpf_tramp_node as fsession's
fexit attachment object and get rid of the bpf_fsession_link object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-10-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding struct bpf_tramp_node to decouple the link out of the trampoline
attachment info.
At the moment the object for attaching bpf program to the trampoline is
'struct bpf_tramp_link':
struct bpf_tramp_link {
struct bpf_link link;
struct hlist_node tramp_hlist;
u64 cookie;
}
The link holds the bpf_prog pointer and forces one link - one program
binding logic. In following changes we want to attach program to multiple
trampolines but we want to keep just one bpf_link object.
Splitting struct bpf_tramp_link into:
struct bpf_tramp_link {
struct bpf_link link;
struct bpf_tramp_node node;
};
struct bpf_tramp_node {
struct bpf_link *link;
struct hlist_node tramp_hlist;
u64 cookie;
};
The 'struct bpf_tramp_link' defines standard single trampoline link
and 'struct bpf_tramp_node' is the attachment trampoline object with
pointer to the bpf_link object.
This will allow us to define link for multiple trampolines, like:
struct bpf_tracing_multi_link {
struct bpf_link link;
...
int nodes_cnt;
struct bpf_tracing_multi_node nodes[] __counted_by(nodes_cnt);
};
Cc: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-9-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_PROG_LOAD verifies the loader signature but does not record the
outcome on the BPF program. [BPF] LSMs and audit can read attr->signature
and attr->keyring_id to infer "was this signed, and if so, against which
keyring".
Add prog->aux->sig (verdict + keyring_{type,serial}), populated by
bpf_prog_load before the LSM hook. keyring_type classifies the keyring
the load referenced (builtin, secondary, platform or user), while
keyring_serial records the serial of the keyring the signature was
actually validated against. System keyrings carry a pseudo key pointer
with no user-visible serial and are reported as 0, as are unsigned loads.
Failed verifications reject the load before the hook runs, so it observes
only either UNSIGNED or VERIFIED.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260605213518.544262-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since there're 4 bytes padding at the end of struct bpf_prog_info, they
won't be checked by bpf_check_uarg_tail_zero().
pahole -C bpf_prog_info ./vmlinux
struct bpf_prog_info {
...
__u32 attach_btf_obj_id; /* 220 4 */
__u32 attach_btf_id; /* 224 4 */
/* size: 232, cachelines: 4, members: 38 */
/* sum members: 224 */
/* sum bitfield members: 1 bits, bit holes: 1, sum bit holes: 31 bits */
/* padding: 4 */
/* forced alignments: 9 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
If a future kernel extension adds a new 4-byte field, older userspace
programs allocating this structure on the stack might inadvertently pass
uninitialized stack garbage into the new field, permanently breaking
backward compatibility. -- sashiko [1]
Fix it by changing sizeof(info) to
offsetofend(struct bpf_prog_info, attach_btf_id).
And, add "__u32 :32" to the tail of struct bpf_prog_info.
[1] https://lore.kernel.org/bpf/20260513224823.6494FC19425@smtp.kernel.org/
Fixes: aba64c7da9 ("bpf: Add verified_insns to bpf_prog_info and fdinfo")
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260605155249.20772-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for timers, workqueues, task work, spin locks and kptrs.
Without this, users needing deferred callbacks, BPF_F_LOCK, or
refcounted kernel pointers in a dynamically-sized map have no option -
fixed-size htab is the only map supporting these field types.
Resizable hashtab should offer the same capability.
kptr semantics under in-place updates are identical to array map.
Properly clean up BTF record fields on element delete and map
teardown by wiring up bpf_obj_free_fields through a memory allocator
destructor, matching the pattern used by htab for non-prealloc maps.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260605-rhash-v7-6-5b8e05f8630d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rhashtable_lookup_likely() for lookups, rhashtable_remove_fast()
for deletes, and rhashtable_lookup_get_insert_fast() for inserts.
Updates modify values in place under RCU rather than allocating a
new element and swapping the pointer (as regular htab does). This
trades read consistency for performance: concurrent readers may
see partial updates. BPF_F_LOCK support and special-field
handling (timers, kptrs, etc.) follow in a later commit.
Initialize rhashtable with bpf_mem_alloc element cache. Require
BPF_F_NO_PREALLOC. Limit max_entries to 2^31. Free elements via
rhashtable_free_and_destroy().
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260605-rhash-v7-4-5b8e05f8630d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The loader verifies map->sha against the metadata hash in its
instructions. map->sha is calculated when BPF_OBJ_GET_INFO_BY_FD is
called on the frozen map.
While the map is frozen, the /signed loader/ must also ensure the map
is exclusive, as, without exclusivity (which a hostile host could just
omit when loading the loader), another BPF program with map access can
mutate the contents afterwards, so the check passes on stale data.
With the extra check as part of the signed loader, it now refuses to
move on with map->sha validation if the host set it up wrongly.
Fixes: fb2b0e2901 ("libbpf: Update light skeleton for signing")
Signed-off-by: KP Singh <kpsingh@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260601150248.394863-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_map_get_info_by_fd() is the only caller of the ->map_get_hash
and always invokes it with hash_buf == map->sha and hash_buf_size
of SHA256_DIGEST_SIZE. array_map_get_hash() in turn lets sha256()
write the digest directly into that buffer (map->sha) and then
performs a trailing memcpy(), which evaluates to memcpy(map->sha,
map->sha, 32): a redundant self-copy. The hash_buf_size argument
was never used at all. Simplify this a bit, no functional change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260601150248.394863-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If security_bpf_prog_load() fails there is no need to call into
security_bpf_prog_free() as the LSM will handle the cleanup of any partial
LSM state before returning to the caller with an error. Thankfully this
isn't an issue with any of the existing code as the LSMs which currently
provide BPF hook callback implementations don't allocate any internal
state, but this is something we want to fix for potential future users.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20260523160025.16363-2-paul@paul-moore.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f23 added the mprog query API +
revision; tcx in e420bed025, netkit in 35dfaad718). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (1209339844). That
path has a real population of pre-revision callers.
Fixes: 1209339844 ("bpf: Implement mprog API on top of existing cgroup progs")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://lore.kernel.org/r/20260531075600.4058207-2-yuyanghuang@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because there is time gap between bpf_map_new_fd() and close_fd(), a
concurrent thread is able to close the new fd and opens a new, unrelated
file with the exact same fd number. Thereafter, this close_fd() might
inadvertently close the unrelated file.
To avoid such regression, do finalize log before security_bpf_map_create().
However, in order to achieve it, move bpf_get_file_flag(),
security_bpf_map_create(), bpf_map_alloc_id(), and bpf_map_new_fd() from
__map_create() to map_create(). And, rename __map_create() to
map_create_alloc() meanwhile.
Then, in order to reuse the map and token when all checks pass in
map_create_alloc(), pass "struct bpf_map **" and "struct bpf_token **" to
map_create_alloc().
Fixes: 49f9b2b2a1 ("bpf: Add syscall common attributes support for map_create")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260521142909.95818-1-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because of the 8-byte alignment, the compiler will pad struct
bpf_common_attr to 24 bytes. That said, sizeof(attr_common) is 24 instead
of 20.
When check tail zero using sizeof(attr_common) in
bpf_check_uarg_tail_zero(), there will be 4 bytes that won't be checked.
To also check the padding 4 bytes, replace sizeof(attr_common) with
offsetofend(struct bpf_common_attr, log_true_size).
Fixes: f28771c069 ("bpf: Extend BPF syscall with common attributes support")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260518145446.6794-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Many BPF_MAP_CREATE validation failures currently return -EINVAL without
any explanation to userspace.
Plumb common syscall log attributes into map_create(), create a verifier
log from bpf_common_attr::log_buf/log_size/log_level, and report
map-creation failure reasons through that buffer.
This improves debuggability by allowing userspace to inspect why map
creation failed and read back log_true_size from common attributes.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-7-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_BTF_LOAD can now take log parameters from both union bpf_attr and
struct bpf_common_attr, with the same merge rules as BPF_PROG_LOAD:
- if both sides provide a complete log tuple (buf/size/level) and they
match, use it;
- if only one side provides log parameters, use that one;
- if both sides provide complete tuples but they differ, return -EINVAL.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-6-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF_PROG_LOAD can now take log parameters from both union bpf_attr and
struct bpf_common_attr. The merge rules are:
- if both sides provide a complete log tuple (buf/size/level) and they
match, use it;
- if only one side provides log parameters, use that one;
- if both sides provide complete tuples but they differ, return -EINVAL.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-5-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The next commit will add support for reporting logs via extended common
attributes, including 'log_true_size'.
To prepare for that, refactor the 'log_true_size' reporting logic by
introducing a new struct bpf_log_attr to encapsulate log-related behavior:
* bpf_log_attr_init(): initialize log fields, which will support
extended common attributes in the next commit.
* bpf_log_attr_finalize(): handle log finalization and write back
'log_true_size' to userspace.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-4-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add generic BPF syscall support for passing common attributes.
The initial set of common attributes includes:
1. 'log_buf': User-provided buffer for storing logs.
2. 'log_size': Size of the log buffer.
3. 'log_level': Log verbosity level.
4. 'log_true_size': Actual log size reported by kernel.
The common-attribute pointer and its size are passed as the 4th and 5th
syscall arguments. A new command bit, 'BPF_COMMON_ATTRS' ('1 << 16'),
indicates that common attributes are supplied.
This commit adds syscall and uapi plumbing. Command-specific handling is
added in follow-up patches.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260512153157.28382-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the BPF instruction set allows bpf-to-bpf calls (or internal
calls, pseudo calls) to use a 32-bit imm field to represent the relative
jump offset.
However, when JIT is disabled or falls back to the interpreter, the
verifier invokes bpf_patch_call_args() to rewrite the call instruction.
In this function, the 32-bit imm is downcast to s16 and stored in the off
field.
void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth)
{
stack_depth = max_t(u32, stack_depth, 1);
insn->off = (s16) insn->imm;
insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] -
__bpf_call_base_args;
insn->code = BPF_JMP | BPF_CALL_ARGS;
}
If the original imm exceeds the s16 range (i.e., a jump offset greater
than 32767 instructions), this downcast silently truncates the offset,
resulting in an incorrect call target.
Fix this by:
1. In bpf_patch_call_args(), keeping the imm field unchanged and using the
off field to store the index of the interpreter function.
2. In ___bpf_prog_run() for the JMP_CALL_ARGS case, retrieving the
interpreter function pointer from the interpreters_args array using the
off field as the index, and passing the original imm to calculate the
last argument of the interpreter function.
After these changes, the truncation issue is resolved, and __bpf_call_base_args
is also no longer needed and can be removed, which makes the code cleaner.
Performance: In ___bpf_prog_run() for the JMP_CALL_ARGS case, changing the
retrieval of the interpreter function pointer from pointer addition to
direct array indexing improves performance. The possible reason is that the
latter has better instruction-level parallelism. See the v5 discussion [1]
for more details.
[1] https://lore.kernel.org/bpf/f120c3c4-6999-414a-b514-518bb64b4758@zju.edu.cn/
To avoid requiring bpftool changes, keep the new imm/off encoding internal
and restore the legacy xlated dump layout in bpf_insn_prepare_dump().
For bpf-to-bpf call offsets that do not fit in s16, export off as 0 instead
of a truncated and misleading value.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Suggested-by: Xu Kuohai <xukuohai@huaweicloud.com>
Suggested-by: Puranjay Mohan <puranjay@kernel.org>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Link: https://lore.kernel.org/r/20260506094714.419842-3-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow BPF_PROG_TYPE_RAW_TRACEPOINT, BPF_PROG_TYPE_TRACEPOINT, and
BPF_TRACE_RAW_TP (tp_btf) programs to be sleepable by adding them
to can_be_sleepable().
For BTF-based raw tracepoints (tp_btf), add a load-time check in
bpf_check_attach_target() that rejects sleepable programs attaching
to non-faultable tracepoints with a descriptive error message.
For raw tracepoints (raw_tp), add an attach-time check in
bpf_raw_tp_link_attach() that rejects sleepable programs on
non-faultable tracepoints. The attach-time check is needed because
the tracepoint name is not known at load time for raw_tp.
The attach-time check for classic tracepoints (tp) in
__perf_event_set_bpf_prog() was added in the previous patch.
Replace the verbose error message that enumerates allowed program
types with a generic "Program of this type cannot be sleepable"
message, since the list of sleepable-capable types keeps growing.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-4-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Pass bpf_verifier_env to bpf_int_jit_compile(). The follow-up patch will
use env->insn_aux_data in the JIT stage to detect indirect jump targets.
Since bpf_prog_select_runtime() can be called by cbpf and lib/test_bpf.c
code without verifier, introduce helper __bpf_prog_select_runtime()
to accept the env parameter.
Remove the call to bpf_prog_select_runtime() in bpf_prog_load(), and
switch to call __bpf_prog_select_runtime() in the verifier, with env
variable passed. The original bpf_prog_select_runtime() is preserved for
cbpf and lib/test_bpf.c, where env is NULL.
Now all constants blinding calls are moved into the verifier, except
the cbpf and lib/test_bpf.c cases. The instructions arrays are adjusted
by bpf_patch_insn_data() function for normal cases, so there is no need
to call adjust_insn_arrays() in bpf_jit_blind_constants(). Remove it.
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com> # v8
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com> # v12
Acked-by: Hengqi Chen <hengqi.chen@gmail.com> # v14
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260416064341.151802-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
RCU Tasks Trace grace period implies RCU grace period, and this
guarantee is expected to remain in the future. Only BPF is the user of
this predicate, hence retire the API and clean up all in-tree users.
RCU Tasks Trace is now implemented on SRCU-fast and its grace period
mechanism always has at least one call to synchronize_rcu() as it is
required for SRCU-fast's correctness (it replaces the smp_mb() that
SRCU-fast readers skip). So, RCU-tt GP will always imply RCU GP.
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260407162234.785270-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Don't reject usage of fixed unaligned offsets for syscall ctx. Tests
will be added in later commits. Unaligned offsets already work for
variable offsets.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406194403.1649608-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
uprobe programs are allowed to modify struct pt_regs.
Since the actual program type of uprobe is KPROBE, it can be abused to
modify struct pt_regs via kprobe+freplace when the kprobe attaches to
kernel functions.
For example,
SEC("?kprobe")
int kprobe(struct pt_regs *regs)
{
return 0;
}
SEC("?freplace")
int freplace_kprobe(struct pt_regs *regs)
{
regs->di = 0;
return 0;
}
freplace_kprobe prog will attach to kprobe prog.
kprobe prog will attach to a kernel function.
Without this patch, when the kernel function runs, its first arg will
always be set as 0 via the freplace_kprobe prog.
To fix the abuse of kprobe_write_ctx=true via kprobe+freplace, disallow
attaching freplace programs on kprobe programs with different
kprobe_write_ctx values.
Fixes: 7384893d97 ("bpf: Allow uprobe program to change context registers")
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260331145353.87606-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, tracepoints were switched from using disabled preemption
(which acts as RCU read section) to SRCU-fast when they are not
faultable. This means that to do a proper grace period wait for programs
running in such tracepoints, we must use SRCU's grace period wait.
This is only for non-faultable tracepoints, faultable ones continue
using RCU Tasks Trace.
However, bpf_link_free() currently does call_rcu() for all cases when
the link is non-sleepable (hence, for tracepoints, non-faultable). Fix
this by doing a call_srcu() grace period wait.
As far RCU Tasks Trace gp -> RCU gp chaining is concerned, it is deemed
unnecessary for tracepoint programs. The link and program are either
accessed under RCU Tasks Trace protection, or SRCU-fast protection now.
The earlier logic of chaining both RCU Tasks Trace and RCU gp waits was
to generalize the logic, even if it conceded an extra RCU gp wait,
however that is unnecessary for tracepoints even before this change.
In practice no cost was paid since rcu_trace_implies_rcu_gp() was always
true. Hence we need not chaining any RCU gp after the SRCU gp.
For instance, in the non-faultable raw tracepoint, the RCU read section
of the program in __bpf_trace_run() is enclosed in the SRCU gp, likewise
for faultable raw tracepoint, the program is under the RCU Tasks Trace
protection. Hence, the outermost scope can be waited upon to ensure
correctness.
Also, sleepable programs cannot be attached to non-faultable
tracepoints, so whenever program or link is sleepable, only RCU Tasks
Trace protection is being used for the link and prog.
Fixes: a46023d561 ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20260331211021.1632902-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
kvmemdup_bpfptr() returns -EFAULT when the user pointer cannot be
copied, and -ENOMEM on allocation failure. The error path always
returned -ENOMEM, misreporting bad addresses as out-of-memory.
Return PTR_ERR(sig) so user space gets the correct errno.
Signed-off-by: Weixie Cui <cuiweixie@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/tencent_C9C5B2B28413D6303D505CD02BFEA4708C07@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF hash map may now use the map_check_btf() callback to decide whether
to set a dtor on its bpf_mem_alloc or not. Unlike C++ where members can
opt out of const-ness using mutable, we must lose the const qualifier on
the callback such that we can avoid the ugly cast. Make the change and
adjust all existing users, and lose the comment in hashtab.c.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Currently, bpf_map_get_info_by_fd calculates and caches the hash of the
map regardless of the map's frozen state.
This leads to a TOCTOU bug where userspace can call
BPF_OBJ_GET_INFO_BY_FD to cache the hash and then modify the map
contents before freezing.
Therefore, a trusted loader can be tricked into verifying the stale hash
while loading the modified contents.
Fix this by returning -EPERM if the map is not frozen when the hash is
requested. This ensures the hash is only generated for the final,
immutable state of the map.
Fixes: ea2e6467ac ("bpf: Return hashes of maps in BPF_OBJ_GET_INFO_BY_FD")
Reported-by: Toshi Piazza <toshi.piazza@microsoft.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260205070755.695776-1-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc).
Fixes: 3492715683 ("bpf: Implement signature verification for BPF programs")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260205063807.690823-1-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
