When the eswitch transitions, propagate the change to SD: secondaries
get their TX flow table root reconfigured for the new mode, and when
all group devices move to switchdev, the per-group shared FDB is
activated.
Shared FDB activation is best-effort - failure does not block the
eswitch transition; the next transition retries.
Note: the existing mlx5_get_sd() guard that blocks switchdev for SD
devices is intentionally retained. It will be removed once all
supporting patches are in place.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In Socket Direct configurations the primary and secondary PFs share the
same native_port_num. The eswitch vport metadata encodes pf_num in its
upper bits to distinguish vports across PFs. Without SD-awareness, both
PFs generate identical metadata, causing FDB rules to steer traffic to
the wrong representor.
Add mlx5_sd_pf_num_get() which remaps the pf_num for SD devices.
Use it so each PF in an SD group produces unique vport metadata.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add mlx5_fs_cmd_query_l2table_silent() to query the current silent mode
state from firmware. This allows detecting if firmware has already put
secondary devices into silent mode.
During SD group registration, query the silent mode of each device. If
a device is already in silent mode (set by firmware), record this in
the fw_silents_secondaries flag and use it to help determine the
primary/secondary roles.
When fw_silents_secondaries is set, skip the driver-initiated silent
mode set/unset operations since firmware manages this state. This
handles configurations where firmware persistently silences secondary
devices.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor SD group registration to use devcom event-driven role
determination to ensure SD is marked as ready only after roles are fully
assigned and the group state is consistent, making outside accessors,
which will be added in downstream patches, safe to use without races.
The devcom events:
- SD_PRIMARY_SET event: each device compares bus numbers with peers
to determine which should be primary
- SD_SECONDARIES_SET event: secondaries register themselves with the
elected primary device
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some devcom events are not expected to fail. Rather than attempting
a rollback that may not be meaningful, allow callers to pass
DEVCOM_CANT_FAIL as the rollback_event to indicate that the event
handler should not fail. If it does, emit a warning and stop
propagating to further peers, but skip the rollback path.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor mlx5_devcom_send_event() into two functions:
- mlx5_devcom_locked_send_event(): performs the dispatch (and
rollback) with comp->sem already held by the caller.
- mlx5_devcom_send_event(): unchanged wrapper that takes comp->sem,
calls the locked variant, and releases it.
This lets callers bracket multiple event broadcasts under a single
held write lock, eliminating the gap between consecutive dispatches
where peer state could change.
Will be used by a downstream patch.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SD secondary devices share the primary's uplink and do not have
their own uplink representor. When reloading IB reps on secondary
devices, skip the uplink and only load VF/SF vport IB reps.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260612113904.537595-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GRO_LEGACY_MAX_SIZE = 65536; total_len being 65536 is too big to fit
into a u16. As can be seen in skb_gro_receive, packets bigger or equal
to gro_max_size (or GRO_LEGACY_MAX_SIZE) are dropped with -E2BIG. Apply
the same boundary to geneve_post_decap_hint to avoid writing 65536 to a
16-bit iph->tot_len field with an overflow.
Fixes: fd0dd79657 ("geneve: use GRO hint option in the RX path")
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260611192955.604661-3-alice.kernel@fastmail.im
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to commit add641e7de ("sched: act_csum: don't mangle TCP and
UDP GSO packets"), UDP tunnel GSO packets going through act_csum
shouldn't have their checksum calculated at this point, because it will
be done after segmentation. Setting the checksum in act_csum modifies
skb->ip_summed and prevents inner IP csum offload from kicking in,
resulting in a packet with a bad checksum.
Add UDP tunnel GSO packets to the exceptions, and also add UDP GSO
(SKB_GSO_UDP_L4), as the same logic as in the commit mentioned above
applies to UDP GSO too.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260611192955.604661-2-alice.kernel@fastmail.im
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jijie Shao says:
====================
net: hns3: enhance tc flow offload support
This patchset enhances the tc flow offload support for hns3 driver:
- Patch 1: Refactor hclge_add_cls_flower() to support more actions
- Patch 2: Improve unused_tuple parameter setting for separate src/dst configuration
- Patch 3: Add support for HCLGE_FD_ACTION_SELECT_QUEUE and HCLGE_FD_ACTION_DROP_PACKET actions
- Patch 4: Add support for FLOW_DISSECTOR_KEY_IP and FLOW_DISSECTOR_KEY_ENC_KEYID dissectors
- Patch 5: Add debugfs support for dumping FD rules
- Patch 6: Move FD code to a separate file (hclge_fd.c) for better code organization
====================
Link: https://patch.msgid.link/20260610060618.834987-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hclge_main.c file has become very large,
so the fd code has been moved to a separate hclge_fd.c file.
This patch only moves the code and does not modify any functionality.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260610060618.834987-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the tc tool only supports adding and deleting rules from
the driver but does not support querying rules from the driver.
This patch adds a rule dump file in debugfs to check whether the driver's
configuration matches the configuration issued by tc flow.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260610060618.834987-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver does not support FLOW_DISSECTOR_KEY_IP and
FLOW_DISSECTOR_KEY_ENC_KEYID. But the hardware supports
ip_tos (FLOW_DISSECTOR_KEY_IP) and
outer_tun_vni (FLOW_DISSECTOR_KEY_ENC_KEYID).
This patch adds support for FLOW_DISSECTOR_KEY_IP and
FLOW_DISSECTOR_KEY_ENC_KEYID.
Additionally, since tc flow cannot effectively support
l2_user_def, l3_user_def, and l4_user_def,
this patch explicitly sets them to not be used.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260610060618.834987-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver supports only one action:HCLGE_FD_ACTION_SELECT_TC.
This patch adds support for HCLGE_FD_ACTION_SELECT_QUEUE and
HCLGE_FD_ACTION_DROP_PACKET.
A rule can have only one action. Therefore, the driver intercepts rules
that have multiple actions or no action.
Note: The driver considers cls_flower->classid as an action:
HCLGE_FD_ACTION_SELECT_TC.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260610060618.834987-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when the tc tool is used to set flow table rules, the IP address
and MAC address can be configured separately, for example, src_xx or dst_xx
can be configured separately.
Therefore, the driver needs to check whether the mask is all zero in
keys, such as FLOW_DISSECTOR_KEY_IPV4_ADDRS, FLOW_DISSECTOR_KEY_IPV6_ADDRS,
and FLOW_DISSECTOR_KEY_ETH_ADDRS.
If the mask is all zero, the tuple is not configured.
In this case, the driver adds the tuple to unused_tuple.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260610060618.834987-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the tc parameter from the add_cls_flower() ops callback and
refactor action parsing to support future extensions for SELECT_QUEUE
and DROP_PACKET actions.
Changes:
* Remove the tc parameter from the add_cls_flower() callback signature.
* Extract TC-based action parsing into hclge_get_tc_flower_action().
* Move the dissector->used_keys check from hclge_parse_cls_flower() to
hclge_check_cls_flower(), and restrict ETH_ADDRS to
HCLGE_FD_MODE_DEPTH_2K_WIDTH_400B_STAGE_1 mode since hardware only
supports MAC matching there.
* Migrate error reporting from dev_err() to netlink extended ACK (extack).
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260610060618.834987-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei says:
====================
dpaa2-switch: FDB management refactoring
The FDB management done by the dpaa2_switch_port_set_fdb() function is
hard to follow even by trained eyes. This series tries to make it easier
to read and understand it by factoring out some code blocks into helper
functions and unifying the join and leave paths in terms of FDB
management.
====================
Link: https://patch.msgid.link/20260610150912.1788482-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For both the join and leave paths, the logic goes through the following
steps: determines which FDB should be used on a port after the current
changeupper change, populate the private port structures with the new
FDB and, if necessary, make as not used the old FDB.
Instead of having two distinct paths inside the
dpaa2_switch_port_set_fdb() for linking=true and linking=false, unify
them. This will hopefully help in making this function easier to read.
No behavior changes are expected.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260610150912.1788482-6-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the FDB selection for when a port leaves bridge into a new helper -
dpaa2_switch_fdb_for_leave(). This will hopefully make the
dpaa2_switch_port_set_fdb() function easier to read and follow. The new
helper only determines the FDB to be used, any updates into the private
port structure still gets done in the set_fdb() function.
No changes in the actual behavior are intended.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260610150912.1788482-5-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dpaa2_switch_port_set_fdb() function handles the setup of the FDB
for both changeupper cases: join and leave. Move the code block which
handles the join path into a new helper - dpaa2_switch_fdb_for_join() -
with the hope that the entire function will become easier to read and
extend with other use cases in the future.
This new helper just determines and returns what FDB should be used for
a specific port, the cleanup of the old FDB and the actual setup in the
per port structure remains in the dpaa2_switch_port_set_fdb() function.
No changes in the actual behavior are intended.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260610150912.1788482-4-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dpaa2_switch_port_set_fdb() function is hard to follow and
open-coding the in-use check into it makes it even harder to read.
Factor out that code block into a new helper -
dpaa2_switch_fdb_in_use_by_others().
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260610150912.1788482-3-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since there dpaa2_switch_port_set_fdb() never fails and its return value
was never checked, change its prototype to return void.
Also, instead of determining if the DPAA2 port is joining or leaving an
upper based on the value of the 'bridge_dev' parameter, add the
'linking' parameter to explicitly specify the action.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260610150912.1788482-2-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-06-09 (idpf, ice, i40e, iavf, ixgbe, igc, igb, e1000e, e1000)
Marco Crivellari replaces obsolete use of system_unbound_wq to
system_dfl_wq for idpf.
Natalia removes redundant PTP checks on ice.
Corinna Vinschen removes redundant MAC address check on iavf.
Jakub Raczynski replaces open-coded array size calculation to use
ARRAY_SIZE for i40e and iavf drivers.
Piotr removes a couple redundant assignments on ixgbe.
Alex utilizes ktime_get_* helpers for igb and e1000e.
Daiki Harada replaces napi_schedule() to, more appropriate,
napi_schedule_irqoff() call in igb and igc.
Matt Vollrath does the same on e1000e.
Agalakov Daniil skips unnecessary endian conversions on e1000e and
e1000.
Maximilian Pezzullo fixes some typos on igb and igc.
====================
Link: https://patch.msgid.link/20260609213559.178657-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Why]
In e1000_set_eeprom(), the eeprom_buff is allocated to hold a range of
words. However, only the boundary words (the first and the last) are
populated from the EEPROM if the write request is not word-aligned.
The words in the middle of the buffer remain uninitialized because they
are intended to be completely overwritten by the new data via memcpy().
The previous implementation had a loop that performed le16_to_cpus()
on the entire buffer. This resulted in endianness conversion being
performed on uninitialized memory for all interior words.
Fix this by converting the endianness only for the boundary words
immediately after they are successfully read from the EEPROM.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Co-developed-by: Iskhakov Daniil <dish@amicon.ru>
Signed-off-by: Iskhakov Daniil <dish@amicon.ru>
Signed-off-by: Agalakov Daniil <ade@amicon.ru>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-14-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[Why]
In e1000_set_eeprom(), the eeprom_buff is allocated to hold a range of
words. However, only the boundary words (the first and the last) are
populated from the EEPROM if the write request is not word-aligned.
The words in the middle of the buffer remain uninitialized because they
are intended to be completely overwritten by the new data via memcpy().
The previous implementation had a loop that performed le16_to_cpus()
on the entire buffer. This resulted in endianness conversion being
performed on uninitialized memory for all interior words.
Fix this by converting the endianness only for the boundary words
immediately after they are successfully read from the EEPROM.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Co-developed-by: Iskhakov Daniil <dish@amicon.ru>
Signed-off-by: Iskhakov Daniil <dish@amicon.ru>
Signed-off-by: Agalakov Daniil <ade@amicon.ru>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-13-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The __napi_schedule_irqoff() macro is intended to bypass saving and
restoring IRQ state when scheduling is requested from an IRQ handler,
where hard interrupts are already disabled. Use this macro in all three
interrupt handlers.
This was tested on a system with an I218-V and MSI interrupts. Because
this is an optimization, I was interested in measuring the impact, so I
added ktime_get() time measurement to e1000_intr_msi and a print of the
last sample in the watchdog task. For each test case I ran a
bi-directional iperf3 to saturate the line. With some help from awk,
here are the statistics.
49 samples each, all units ns
previous: min 678 max 1265 mean 879.429 median 806 stddev 137.188
noirq: min 707 max 1165 mean 811.857 median 790 stddev 89.486
According to this informal comparison, the mean time to handle an
interrupt from start to finish is improved by about 8% under load.
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Michal Cohen <michalx.cohen@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-12-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace napi_schedule() with napi_schedule_irqoff()
in the interrupt handler path in igb driver
Tested on QEMU with igb NIC emulation (-nic user,model=igb)
Suggested-by: Kohei Enju <kohei@enjuk.jp>
Signed-off-by: Daiki Harada <daiky0325@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace ktime_to_ns(ktime_get_real()) with the direct equivalent
ktime_get_real_ns() in e1000e_systim_reset(). Using the combined helper
avoids the unnecessary intermediate ktime_t variable and makes the
intent clearer.
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace ktime_to_ns(ktime_get_real()) with the direct equivalent
ktime_get_real_ns() and ktime_to_timespec64(ktime_get_real()) with
ktime_get_real_ts64() in igb_ptp_reset(). Using the combined helpers
makes the intent clearer.
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unnecessary code. No functional impact.
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are still places in the code where manual calculation of array size
exist, but it is good to enforce usage of single macro through the whole
code as it makes code bit more readable.
While at it, beautify condition surrounding it by reversing check and remove
unnecessary casting.
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is just a simple cleanup fix. Commit 35a2443d09 ("iavf: Add
waiting for response from PF in set mac") introduced a duplicate
ether_addr_equal() check, so the current code tests the new MAC twice
against the former MAC.
Remove the outer ether_addr_equal() test, remnant of commit c5c922b3e0
("iavf: fix MAC address setting for VFs when filter is rejected")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unnecessary condition checks in ice_ptp_setup_adapter() and
ice_ptp_init(). They are duplicated in ice_pf_src_tmr_owned().
Change ice_ptp_setup_adapter() to return void.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Natalia Wochtman <natalia.wochtman@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260609213559.178657-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ratheesh Kannoth says:
====================
octeontx2-af: npc: Enhancements.
This series extends Marvell octeontx2-af support for CN20K NPC (MCAM
debuggability, allocation policy, default-rule lifetime, optional KPU
profiles from firmware files, X2/X4 MCAM keyword handling in flows and
defaults, and dynamic CN20K NPC private state), adds a devlink mechanism
for multi-value parameters, and moves devlink_nl_param_fill() temporaries
to the heap so stack usage stays reasonable once union devlink_param_value
grows (patch 3).
Patch 1 enforces a single RVU admin-function PCI device in the kernel.
On Octeon series SoCs, hardware resources such as NPC, NIX and related
blocks are global and coordinated by the AF driver; PFs and VFs request
them through AF mailbox messages. Firmware exposes only one AF PCI
function at boot, so two AF driver instances cannot both own that state.
rvu_probe() rejects a second bind with -EBUSY, logs a warning, clears the
probe gate on early allocation failures, and aligns the driver model with
hardware so reviewers and automation can rely on exactly one bound AF.
Patch 2 improves CN20K MCAM visibility in debugfs: mcam_layout marks
enabled entries, dstats reports per-entry hit deltas (baseline updated in
software after each read; hardware counters are not cleared), and mismatch
lists enabled entries without a PF mapping.
Patch 3 allocates the per-configuration-mode union devlink_param_value
buffers and struct devlink_param_gset_ctx used by devlink_nl_param_fill()
with kcalloc()/kzalloc_obj() and funnels failures through a single cleanup
path so the netlink reply path stays safe as the union grows.
Patch 4 (Saeed) introduces DEVLINK_PARAM_TYPE_U64_ARRAY and nested
DEVLINK_ATTR_PARAM_VALUE_DATA attributes so drivers and user space can
exchange bounded u64 arrays; YAML, uapi, and netlink validation are
updated.
Patch 5 adds a runtime devlink parameter srch_order to reorder CN20K
subbank search during MCAM allocation (the param uses the u64 array type
from patch 4).
Patch 6 ties default MCAM entries to NIX LF alloc/free on CN20K, adds
NIX_LF_DONT_FREE_DFT_IDXS for PF teardown paths that must not drop default
NPC indexes while the driver still owns state, and tightens nix_lf_alloc
error propagation.
Patch 7 allows loading a custom KPU profile from /lib/firmware/kpu via
module parameter kpu_profile, with cam2 / ptype_mask wiring and helpers
that share firmware-sourced vs filesystem-sourced profile layouts.
Patch 8 makes default-rule allocation, AF flow install, and PF-side RSS,
defaults, and ethtool flows respect the active CN20K MCAM keyword width
(X2 vs X4), including X4 reference-index masking and -EOPNOTSUPP when a
flow needs X4 keys on an X2-only profile.
Patch 9 replaces file-scope npc_priv and static dstats with allocation
sized from discovered bank/subbank geometry, threads npc_priv_get()
through CN20K NPC paths, and allocates dstats via devm_kzalloc for the
debugfs helper.
Patch 1 is ordered first so later patches assume a single bound AF.
Heap-backed devlink_nl_param_fill() sits immediately before the U64 array
param work so incremental builds stay stack-safe as the union grows; the
CN20K patches keep srch_order ahead of NIX LF coordination, optional KPU
profile load from firmware files, X2/X4 handling, and the npc_priv refactor
that touches the same files heavily.
====================
Link: https://patch.msgid.link/20260609040453.711932-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the file-scope static npc_priv with a kcalloc'd struct filled
from hardware bank/subbank geometry at init (num_banks is no longer a
const compile-time constant; drop init_done and use a non-NULL
npc_priv pointer for liveness). Thread npc_priv_get() / pointer access
through the CN20K NPC code paths, extend teardown to kfree the root
struct on failure and in npc_cn20k_deinit, and adjust MCAM section
setup to use the discovered subbank count.
Allocate MCAM debugfs dstats via devm_kzalloc instead of a static matrix,
and use the allocated backing store consistently when computing deltas
(including the counter rollover compare).
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-10-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Default CN20K NPC rule allocation now keys off the active MCAM keyword
width: use X4 with a bank-masked reference index when the silicon uses
X4 keys, and X2 with the raw index otherwise (replacing the previous
always-X2 / eidx + 1 behaviour).
In the AF flow-install path, flows that need more than 256 key bits
query the NPC profile; if the platform is fixed to X2 entries, fail
with -EOPNOTSUPP instead of requesting X4. Otherwise select X4 for the
MCAM alloc.
On the PF, cache and pass the profile kw_type from npc_get_pfl_info
through otx2_mcam_pfl_info_get(), and use it when allocating MCAM
entries for RSS/defaults and when installing ethtool flows on CN20K,
including masking the reference index for X4 slot layout.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-9-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Flashing updated firmware on deployed devices is cumbersome. Provide a
mechanism to load a custom KPU (Key Parse Unit) profile directly from
the filesystem at module load time.
When the rvu_af module is loaded with the kpu_profile parameter, the
specified profile is read from /lib/firmware/kpu and programmed into
the KPU registers. Add npc_kpu_profile_cam2 for the extended cam format
used by filesystem-loaded profiles and support ptype/ptype_mask in
npc_config_kpucam when profile->from_fs is set.
Usage:
1. Copy the KPU profile file to /lib/firmware/kpu.
2. Build OCTEONTX2_AF as a module.
3. Load: insmod rvu_af.ko kpu_profile=<profile_name>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-8-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add NIX_LF_DONT_FREE_DFT_IDXS so the PF can send NIX LF free during hw
reinit or teardown without the AF freeing CN20K default NPC rule indexes
while the driver still owns that state (otx2_init_hw_resources and
otx2_free_hw_resources).
On CN20K, allocate default NPC rules from NIX LF alloc before
nix_interface_init, roll back with npc_cn20k_dft_rules_free on failure,
and free from NIX LF free when the new flag is not set. Tighten
rvu_mbox_handler_nix_lf_alloc error handling: use a single rc, propagate
qmem_alloc and other errors, and set -ENOMEM only when kcalloc fails
(remove the blanket -ENOMEM at the free_mem path).
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-7-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CN20K NPC MCAM is split into 32 subbanks that are searched in a
predefined order during allocation. Lower-numbered subbanks have
higher priority than higher-numbered ones.
Add a runtime "srch_order" to control the order in which
subbanks are searched during MCAM allocation.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-6-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devlink param value attribute is not defined since devlink is handling
the value validating and parsing internally, this allows us to implement
multi attribute values without breaking any policies.
Devlink param multi-attribute values are considered to be dynamically
sized arrays of u64 values, by introducing a new devlink param type
DEVLINK_PARAM_TYPE_U64_ARRAY, driver and user space can set a variable
count of u64 values into the DEVLINK_ATTR_PARAM_VALUE_DATA attribute.
Implement get/set parsing and add to the internal value structure passed
to drivers.
This is useful for devices that need to configure a list of values for
a specific configuration.
example:
$ devlink dev param show pci/... name multi-value-param
name multi-value-param type driver-specific
values:
cmode permanent value: 0,1,2,3,4,5,6,7
$ devlink dev param set pci/... name multi-value-param \
value 4,5,6,7,0,1,2,3 cmode permanent
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-5-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink_nl_param_fill() kept two per-configuration-mode copies of
union devlink_param_value plus a struct devlink_param_gset_ctx on the
stack while building the Netlink reply. Allocate those with kcalloc()
and kzalloc_obj() instead, and route failures through a single cleanup
path so temporary buffers are always freed.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-4-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve MCAM visibility and field debugging for CN20K NPC.
- Extend "mcam_layout" to show enabled (+) or disabled state per entry
so status can be verified without parsing the full "mcam_entry" dump.
- Add "dstats" debugfs entry: for enabled MCAM indices, print hit deltas
since the prior read by comparing hardware counters to a per-entry
software baseline and advancing that baseline after each read (hardware
counters are not cleared).
- Add "mismatch" debugfs entry: lists MCAM entries that are enabled
but not explicitly allocated, helping diagnose allocation/field issues.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-3-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On Octeon series SoCs, the AF is an integrated device within the SoC, and
hardware resources such as NPC, NIX and related blocks are global and
coordinated by the AF driver. Physical and virtual functions request those
resources via AF mailbox messages, so two AF driver instances cannot both
own that global state; firmware exposes only one AF PCI function at boot
and any further octeontx2-af PCI probe returns -EBUSY so software matches
the single-AF model.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260609040453.711932-2-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When "snps,rx-queues-to-use" or "tx-queues-to-use" config in DTS is provided
current code will apply U8_MAX value for queues_to_use if there is input of
higher value. But actual maximum number of supported queues is set via
macro MTL_MAX_RX_QUEUES and MTL_MAX_TX_QUEUES, which currently have value of 8.
This value of U8_MAX will be capped to value provided by core in DMA
capabilities (dma_conf), but it does so only if core provides it.
This is true for XGMAC (dwxgmac2) and some GMAC (dwmac4),
but not for (dwmac1000). This capping is at later stage in stmmac_hw_init(),
and during stmmac_mtl_setup() we might parse fields outside allocated memory
if queues_to_use is over defines MTL_MAX_ values,
for example following rx_queues_cfg is array of size of MTL_MAX_RX_QUEUES.
Fix this by capping value to MTL_MAX during config parsing.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260611113358.3379518-3-j.raczynski@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While opening stmmac driver, there is enabling of TBS (Time-Based Scheduling)
option in dma config. Currently this is executed for all possible TX queues via
MTL_MAX_TX_QUEUES macro, but actual number of queues used might differ.
While setting this is generally harmless, since memory for MTL_MAX_TX_QUEUES
is allocated, it is incorrect, because it prepares config for unused queues.
Change this to apply tbs config only to tx_queues_to_use.
Co-developed-by: Chang-Sub Lee <cs0617.lee@samsung.com>
Signed-off-by: Chang-Sub Lee <cs0617.lee@samsung.com>
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260611113358.3379518-2-j.raczynski@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
