Enable the second MAC on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-10-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Once we add a second ethernet node, the MDIO bus names will conflict
unless we provide aliases. Add one for the existing ethernet node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-9-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For improved readability order the aliases alphabetically for
sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-8-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-7-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We'll be adding a second SGMII PHY on the same MDIO bus, so let's index
the first one for better readability.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-6-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Device-tree bindings for MDIO define per-PHY reset-gpios as well as a
global reset-gpios property at the MDIO node level which controls all
devices on the bus. The latter is most likely a workaround for the
chicken-and-egg problem where we cannot read the ID of the PHY before
bringing it out of reset but we cannot bring it out of reset until we've
read its ID.
I have proposed a comprehensive solution for this problem in 2020 but it
never got upstream. We do however have workaround in place which allows
us to hard-code the PHY id in the compatible property, thus skipping the
ID scanning.
Let's make the device-tree for sa8775p-ride slightly more correct by
moving the reset-gpios property to the PHY node with its ID put into the
PHY node's compatible.
Link: https://lore.kernel.org/all/20200622093744.13685-1-brgl@bgdev.pl/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-5-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the second SerDes PHY on sa8775p-ride development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-4-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the second MAC on sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-3-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the SerDes PHY used by EMAC1 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SA8540P-ride is one of the Qualcomm platforms that does not have access
to UEFI runtime services and on which the RTC registers are read-only,
as described in:
https://lore.kernel.org/all/20230202155448.6715-1-johan+linaro@kernel.org/
Reserve four bytes in one of the PMIC registers to hold the RTC offset
the same way as it was done for sc8280xp-crd which has similar
limitations:
commit e67b45582c ("arm64: dts: qcom: sc8280xp-crd: enable rtc")
On SA8540P-ride, the register bank SDAM6 of the first PMIC is not
writable. Following recommendations provided during the review, use
SDAM2 from the second PMIC at offset 0xa0 instead.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Link: https://lore.kernel.org/r/20230809203506.1833205-1-echanude@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CPU frequency scaling, and also add the corresponding memory and
cache bandwidths for each frequency.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20230802011548.387519-9-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the interconnect node for L3 cache on SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230802011548.387519-8-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MAX98927 speaker amplifier "interleave_mode" property was never
documented. Corrected bindings expect "maxim,interleave-mode" instead,
which is already supported by Linux driver. Change is not compatible
with older Linux kernels.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230730202051.71099-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Replace hard-coded interrupt parts (GIC, flags) with standard defines
for readability. No changes in resulting DTBs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230730180638.23539-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Even though currently there is no consumer for L1B, add the supply
for it anyway.
Fixes: 71342fb91e ("arm64: dts: qcom: Add base SM8550 MTP dts")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230801095246.2884770-1-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add based DTSI for SM4450 SoC and includes base description of
CPUs and interrupt-controller which helps to boot to shell with dcc
console on boards with this SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20230731080043.38552-4-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the SM4450 SoC binding and also the boards using it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20230731080043.38552-3-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add nodes to support Type-C USB/DP functionality.
On this platform, a Type-C redriver is added to the
SuperSpeed graph.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-type-c-v5-6-9221cd300903@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the USB3+DP Combo QMP PHY port subnodes in the SM8550 SoC DTSI
to avoid duplication in the devices DTs.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230601-topic-sm8550-upstream-type-c-v5-4-9221cd300903@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
I2C6 and I2C7 use the same interrupts, which is incorrect.
In the downstream kernel, I2C7 has interrupts of 608 instead of 607.
Fixes: 81bee6953b ("arm64: dts: qcom: sm8150: add i2c nodes")
Signed-off-by: Zeyan Li <qaz6750@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/SY7P282MB378712225CBCEA95FE71554DB201A@SY7P282MB3787.AUSP282.PROD.OUTLOOK.COM
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A7 seems to have external pull-up for the SD card chip detect (like
most MSM8916/MSM8939 devices) so drop the internal pull-up. It's not
necessary.
Tested-by: "Lin, Meng-Bo" <linmengbo0689@protonmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230723-a7sdc2cdnopull-v1-1-699fd730afcb@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bindings expect the LPG node name to be "pwm":
sc8180x-lenovo-flex-5g.dtb: pmic@5: 'lpg' does not match any of the regexes:
Fixes: d3302290f5 ("arm64: dts: qcom: sc8180x: Add pmics")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720083500.73554-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Bindings expect the Power-on node name to be "pon":
sc8180x-lenovo-flex-5g.dtb: pmic@0: 'power-on@800' does not match any of the regexes:
Fixes: d3302290f5 ("arm64: dts: qcom: sc8180x: Add pmics")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720083500.73554-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GPIO children of PMICs should use gpio-ranges:
sc8180x-primus.dtb: pmic@0: gpio@c000: 'gpio-ranges' is a required property
Fixes: d3302290f5 ("arm64: dts: qcom: sc8180x: Add pmics")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720083500.73554-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The GPIO children of PMICs should use qcom,spmi-gpio fallback:
sc8180x-primus.dtb: pmic@0: gpio@c000:compatible: ['qcom,pmc8180-gpio'] is too short
Fixes: d3302290f5 ("arm64: dts: qcom: sc8180x: Add pmics")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720083500.73554-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Synaptics RMI4 Touchscreen bindings never defined syna,codes property
for function 1a. No usage in Linux drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720115335.137354-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
According to bindings and Linux driver, there is no VDDA but VIO supply.
Fixes: 4ac46b3682 ("arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720115335.137354-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The LLCC binding and driver was recently corrected to handle the stride
varying between platforms. Switch to the new format to ensure accesses
are done in the right place.
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230612220632.1885175-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Following the SC8180X Primus reference design, add pmic_glink and USB
Type-C wiring for battery manager, external display and orientation
switching.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230612221456.1887533-4-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Wire up pmic_glink and the various components of USB Type-C to get
battery status, orientation switching of SuperSpeed USB, as well as
support for external display on the SC8180X Primus reference device.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230612221456.1887533-3-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Define anchors for wiring up the USB Type-C graph in the board files.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230612221456.1887533-2-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This dts adds support for Samsung Galaxy A7 smartphone released in 2015.
Add a device tree for A7 with initial support for:
- GPIO keys
- Hall Sensor
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5502 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- Touch key
- Accelerometer/Magnetometer
- Fuelgauge
- NFC
- Vibrator
- Touchscreen
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Link: https://lore.kernel.org/r/20230623100237.5299-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are a couple of SoCs whose names end in "pro", with the currently-
upstream examples being msm8974pro and msm8996pro. Allow such suffix in
SoC-specific compatibles.
Fixes: 5aa332c5e7 ("dt-bindings: qcom: document preferred compatible naming")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-1-254ae8642e69@linaro.org
[bjorn: Changed (pro|) to (pro)?, per Rob's request]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
J5 and J5X use an Imagis IST3038C touchscreen that is connected to
blsp_i2c5. Add it to the device tree.
MFD driver for SM5703 is unavailable at the moment, which is required
to power up the touchscreen on J5, so it's disabled on J5 for now.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Link: https://lore.kernel.org/r/20230715214046.14902-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
E5, E7 and Grand Max have ST LIS2HH12 accelerometer.
Add support for it.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Link: https://lore.kernel.org/r/20230716190807.7056-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
