[why]
this is a required logic based on HW programming guide.
tested/ported on dcn401.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add new option override_easf to use in_taps instead of internal
taps policy for debugging
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when using AMD aux backlight control, we avoid sending backlight
update commands to DMUB firmware because it is controlled by aux commands
in driver.
Reviewed-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Harry VanZyllDeJong <hvanzyll@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The hive->event_mgr variable is used by both ras module
and legacy ras. To ensure the continuity of hive seqno
growth, after enabling ras module, it is forbidden to
operate the event_mgr variable in legacy ras.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ras module is enabled, the bad pages will
be loaded by ras module.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In multi-gpu case, a fatal error will generate several
fatal error interrupts. After improving this function,
the ras module can reuse this function to only
handle the first interrupt.
V3:
Initialize event_id using RAS_EVENT_INVALID_ID.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User requested power limits and clock settings are already restored as
part of smu_restore_dpm_user_profile(). It's unnecessary to call the
same restore as part of smu_resume().
Revert the following commits to drop that extra restore:
commit ed4efe426a ("drm/amd: Restore cached power limit during resume")
commit 796ff8a7e0 ("drm/amd: Restore cached manual clock settings during resume")
commit f9b80514a7 ("drm/amd: Only restore cached manual clock settings in restore if OD enabled")
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove queue after reset flag is required to remove a queue that has
been successfully reset to clean up the MES' internal state.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
userptrs could be changed by the user at any time and
hence while locking all the bos before GPU start processing
validate all the userptr bos.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At times we need a bo reference for hmm and for that add
a new struct amdgpu_hmm_range which will hold an optional
bo member and hmm_range.
Use amdgpu_hmm_range instead of hmm_range and let the bo
as an optional argument for the caller if they want to
the bo reference to be taken or they want to handle that
explicitly.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For legacy SOCs, discovery binary is sideloaded. Instead of checking for
binary blob, use a flag to determine if discovery region needs to be
reserved.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
provide a interface that allows ras client send msg to smu/pmfw directly.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow access to user interfaces like sysfs/hwmon only after full
initialization of the device. When device is part of XGMI hive and a
reset is required during initialization, the inteface files will be
created as part of minimal device initialization. Full initialization of
the device will be done only after all devices in XGMI hive are probed
and a reset is done together on all.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Complete reset-on-init sequence before sysfs interfaces are created.
Devices get properly initiaized only after reset, and then only sysfs
interfaces should be made available.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_discovery_info structure to keep all discovery related
information.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aggregate sysfs ini/fini calls into separate functions. No functional
change.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Decouple the amdgpu fence from the amdgpu_job structure.
This lets us clean up the separate fence ops for the embedded
fence and other fences. This also allows us to allocate the
vm fence up front when we allocate the job.
v2: Additional cleanup suggested by Christian
v3: Additional cleanups suggested by Christian
v4: Additional cleanups suggested by David and
vm fence fix
v5: cast seqno (David)
Cc: David.Wu3@amd.com
Cc: christian.koenig@amd.com
Tested-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vangogh has separate limits for default PPT and fast PPT. Add
infrastructure to save both of these limits and restore both of them.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The min/max limits only make sense for default PPT. Restructure
smu_set_power_limit() to only use them in that case.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When passed around internally the upper 8 bits of power limit include
the limit type. This is non-obvious without digging into the nuances
of each function. Instead pass the limit type as an argument to all
applicable layers.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN and VPE userqs are not yet supported and this code is
not correct. Userspace should provide the correct
doorbell offset with in their doorbell page for the IP.
Adjusting it here will not work as expected as userspace
and the queue itself will have different offsets.
We need to add a INFO IOCTL query to get the offset and
range for each IP within the doorbell page to handle this
properly.
Cc: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a userq failed to suspend the rest of the suspend sequence may
have problems. Pass the error code up to the caller for a decision
on what to do.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If multiple userq IDR are in use and there is an error handling one
at suspend or resume it will be silently discarded.
Switch the suspend/resume() code to use guards and return immediately.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If IP suspend fails the callers should be notified so that they can
potentially react.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_device_ip_suspend_phase2() calls amdgpu_ip_block_suspend()
which already sets HW block status to false when succeeding with
IP suspend. Remove the explicit call in
amdgpu_device_ip_suspend_phase2() so that the status is accurate.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Error handling was introduced in commit e095026f00 ("drm/amdgpu:
validate suspend before function call") so the comment about TODO is no
longer needed.
Fixes: e095026f00 ("drm/amdgpu: validate suspend before function call")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_device_ip_suspend() doesn't have a caller outside of
amdgpu_device.c. Make it static.
No intended functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The shutdown() callback uses amdgpu_ip_suspend() which doesn't notify
drm clients during shutdown. This could lead to hangs.
[How]
Change amdgpu_pci_shutdown() to call the same sequence as suspend/resume.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a user unmaps a userq VA, the driver must ensure
the queue has no in-flight jobs. If there is pending work,
the kernel should wait for the attached eviction (bookkeeping)
fence to signal before deleting the mapping.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It requires validating the userq VA whether is mapped before
trying to resume the queue.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keeping waiting the userq fence infinitely until
hang detection, and then suspend the hang queue and
set the fence error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track the userq obj for its life time, and reference and
dereference the buffer flag at its creating and destroying
period.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the userq object virtual address list_add() helpers
for tracking the userq obj va address usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There has been multiple complains that 10 seconds are usually to long.
The original requirement for longer timeout came from compute tests on
AMDVLK, since that is no longer a topic reduce the timeout back to 2
seconds for all queues.
While at it also remove any special handling for compute queues under
SRIOV or pass through.
v2: fix checkpatch warning.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unnecessary headers can slow down the build, drop em.
No intended functional changes.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Tested-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few changes have more whitespace than needed. Clean them up.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Tested-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The firmware limits the max vmid, but align the
settings with the hw limits as well just to be safe.
Reviewed-by: Shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SDMA IP versions >= v4.4.2, firmware will take care of quiescing SDMA
before mode-2 reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This lock was part of the SDMA workaround originally implemented in
gmc_v10_0_flush_gpu_tlb (a70cb2176f moved it to
amdgpu_gmc_flush_gpu_tlb).
This means this lock is useless and be safely dropped.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ttm_copy_mem_to_mem has a single caller, make sure the out
fence is non-NULL to simplify the code.
Since none of the pointers should be NULL, we can enable
__attribute__((nonnull))__.
While at it make the function static since it's only used from
amdgpuu_ttm.c.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx_v9_4_3_xcc_kcq_init_queue doesn't have a fail condition.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend the userq state for identifying the
userq invalid cases.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new SMART_POWER_HDR commands to optimize power consumption on
certain OLED LED panels by sending MaxCLL per frame to TCON.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We require an interlock between driver and firmware for upcoming
features and given that this could possibly happen on any single
cursor programming call (and that we can't asynchronously wait for
firmware to respond because of it) we'd be regressing cursor performance
by at least an extra 40us per call.
When we could possibly have cursor update every 20us - 100s from high
frequency gaming mice this means that we'd be stuttering or dropping
updates and impacting overall cursor performance.
We want a solution that can:
1. Interlock between other firmware features
2. Not stall out or require the DMCUB lock for every single update
[How]
When cursor offloading is enabled and supported by an ASIC driver will
route the cursor programming through to DMU as part of the regular
DC stream cursor programming interfaces for attributes and position.
The atomic pipe programming version will not be updated: this will still
follow the existing programming path by keeping track of a field that
specifies when the register writes should be deferred to DMU.
Cursor locking is not required when cursor offload is in progress since
the updates are consolidated and processed by DMU once at the end
of the frame in a periodic manner.
The shared buffer the firmware queries from is allocated along with the
rest of the scratch state region in an area that's accessible by
both firmware and driver.
The size of the cursor offload (v1) state will not change, but it does
have a unique union per ASIC version with room for expansion if needed.
When firmware features notifying DMU of DRR updates are not enabled we
now send an explicit vtotal min/max update via driver to DMU firmware
whenever the vtotal max changes. This is to allow the cursor programming
to determine the appropriate latch update point offset from vupdate.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
