After DCCP removal, this file was not needed any more.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function belongs to TCP stack, not to net/core/request_sock.c
We get rid of the now empty request_sock.c n the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only called once from inet_csk_listen_start(), it can be static.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: rk: final cleanups part
This is the last part of my current dwmac-rk cleanups.
====================
Link: https://patch.msgid.link/aYMN2gZMfLPKuukG@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rk3506, rk3528 and rk3588 have the rmii_mode bit in the clock GRF
register rather than the gmac GRF register. Provide a mask for this
field in the clock register, and convert these SoCs to use this.
Add the necessary code in rk_gmac_powerup() to write this field.
This allows us to get rid of these SoCs set_to_rmii() function. As
such, we need to mark these SoCs as supporting RMII mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYyB-00000007hpF-1dwK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use rk_encode_wm16() for RMII clock gating control, and also for the
io_clksel bit used to select the transmit clock between CRU-derived
and IO-derived clock sources.
Both of these were configured via the "set_clock_selection" method in
the SoC specific operations, but there is no requirement to change the
io_clksel except when enabling clocks.
It is also possible that we don't need to ungate the RMII clock if we
are operating in RGMII mode, but this commit makes no change there.
Split up the configuration of these as separate functions, and remove
the set_clock_selection() method. Since these clocking bits are in the
same register that we call the "speed" register, move the logic for
writing that register into rk_write_speed_grf_reg().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYy6-00000007hp9-1AJM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RK3528 gmac0 dtsi contains:
gmac0: ethernet@ffbd0000 {
phy-handle = <&rmii0_phy>;
phy-mode = "rmii";
mdio0: mdio {
rmii0_phy: ethernet-phy@2 {
phy-is-integrated;
};
};
};
This follows the same pattern as rk3328, where this gmac instance
only supports RMII. Disable RGMII in phylink's supported_interfaces
mask for this gmac instance.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/E1vnYy1-00000007hp3-0hKm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As detailed in a previous commit ("net: stmmac: rk: convert rk3328 to
use bsp_priv->id") rk3328 gmac2phy only supports RMII, whereas gmac2io
supports both RMII and RGMII. Clear supports_rgmii for gmac2phy.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328 gmac2io,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxw-00000007hox-0DqH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than providing a now-empty set_to_rmii() method to indicate
that RMII is supported, switch to setting ops->supports_rmii instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxq-00000007hor-3yXt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce two boolean flags into struct rk_priv_data indicating
whether RGMII and/or RMII is supported for this instance. Use these
to configure the supported_interfaces mask for phylink, validate the
interface mode. Initialise these from equivalent flags in the
rk_gmac_ops or depending on the presence of the ops->set_to_rgmii and
ops->set_to_mii methods. Finally, make ops->set_to_* optional.
This will allow us to get rid of empty set_to_rmii() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxl-00000007hol-3XiH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some functions do not modify the pointed-to data, but lack const
qualifiers. Add const qualifiers to the arguments of
flow_rule_match_has_control_flags() and flow_cls_offload_flow_rule().
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260204052839.198602-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ivan Vecera says:
====================
dpll: Core improvements and ice E825-C SyncE support
This series introduces Synchronous Ethernet (SyncE) support for the Intel
E825-C Ethernet controller. Unlike previous generations where DPLL
connections were implicitly assumed, the E825-C architecture relies
on the platform firmware (ACPI) to describe the physical connections
between the Ethernet controller and external DPLLs (such as the ZL3073x).
To accommodate this, the series extends the DPLL subsystem to support
firmware node (fwnode) associations, asynchronous discovery via notifiers,
and dynamic pin management. Additionally, a significant refactor of
the DPLL reference counting logic is included to ensure robustness and
debuggability.
DPLL Core Extensions:
* Firmware Node Association: Pins can now be associated with a struct
fwnode_handle after allocation via dpll_pin_fwnode_set(). This allows
drivers to link pin objects with their corresponding DT/ACPI nodes.
* Asynchronous Notifiers: A raw notifier chain is added to the DPLL core.
This allows the Ethernet driver to subscribe to events and react when
the platform DPLL driver registers the parent pins, resolving probe
ordering dependencies.
* Dynamic Indexing: Drivers can now request DPLL_PIN_IDX_UNSPEC to have
the core automatically allocate a unique pin index.
Reference Counting & Debugging:
* Refactor: The reference counting logic in the core is consolidated.
Internal list management helpers now automatically handle hold/put
operations, removing fragile open-coded logic in the registration paths.
* Reference Tracking: A new Kconfig option DPLL_REFCNT_TRACKER is added.
This allows developers to instrument and debug reference leaks by
recording stack traces for every get/put operation.
Driver Updates:
* zl3073x: Updated to associate pins with fwnode handles using the new
setter and support the 'mux' pin type.
* ice: Implements the E825-C specific hardware configuration for SyncE
(CGU registers). It utilizes the new notifier and fwnode APIs to
dynamically discover and attach to the platform DPLLs.
Patch Summary:
Patch 1: DPLL Core (fwnode association).
Patch 2: Driver zl3073x (Set fwnode).
Patch 3-4: DPLL Core (Notifiers and dynamic IDs).
Patch 5: Driver zl3073x (Mux type).
Patch 6: DPLL Core (Refcount refactor).
Patch 7-8: Refcount tracking infrastructure and driver updates.
Patch 9: Driver ice (E825-C SyncE logic).
====================
Link: https://patch.msgid.link/20260203174002.705176-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement SyncE support for the E825-C Ethernet controller using the
DPLL subsystem. Unlike E810, the E825-C architecture relies on platform
firmware (ACPI) to describe connections between the NIC's recovered clock
outputs and external DPLL inputs.
Implement the following mechanisms to support this architecture:
1. Discovery Mechanism: The driver parses the 'dpll-pins' and 'dpll-pin names'
firmware properties to identify the external DPLL pins (parents)
corresponding to its RCLK outputs ("rclk0", "rclk1"). It uses
fwnode_dpll_pin_find() to locate these parent pins in the DPLL core.
2. Asynchronous Registration: Since the platform DPLL driver (e.g.
zl3073x) may probe independently of the network driver, utilize
the DPLL notifier chain The driver listens for DPLL_PIN_CREATED
events to detect when the parent MUX pins become available, then
registers its own Recovered Clock (RCLK) pins as children of those
parents.
3. Hardware Configuration: Implement the specific register access logic
for E825-C CGU (Clock Generation Unit) registers (R10, R11). This
includes configuring the bypass MUXes and clock dividers required to
drive SyncE signals.
4. Split Initialization: Refactor `ice_dpll_init()` to separate the
static initialization path of E810 from the dynamic, firmware-driven
path required for E825-C.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-10-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update existing DPLL drivers to utilize the DPLL reference count
tracking infrastructure.
Add dpll_tracker fields to the drivers' internal device and pin
structures. Pass pointers to these trackers when calling
dpll_device_get/put() and dpll_pin_get/put().
This allows developers to inspect the specific references held by this
driver via debugfs when CONFIG_DPLL_REFCNT_TRACKER is enabled, aiding
in the debugging of resource leaks.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-9-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for the REF_TRACKER infrastructure to the DPLL subsystem.
When enabled, this allows developers to track and debug reference counting
leaks or imbalances for dpll_device and dpll_pin objects. It records stack
traces for every get/put operation and exposes this information via
debugfs at:
/sys/kernel/debug/ref_tracker/dpll_device_*
/sys/kernel/debug/ref_tracker/dpll_pin_*
The following API changes are made to support this:
1. dpll_device_get() / dpll_device_put() now accept a 'dpll_tracker *'
(which is a typedef to 'struct ref_tracker *' when enabled, or an empty
struct otherwise).
2. dpll_pin_get() / dpll_pin_put() and fwnode_dpll_pin_find() similarly
accept the tracker argument.
3. Internal registration structures now hold a tracker to associate the
reference held by the registration with the specific owner.
All existing in-tree drivers (ice, mlx5, ptp_ocp, zl3073x) are updated
to pass NULL for the new tracker argument, maintaining current behavior
while enabling future debugging capabilities.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-8-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the reference counting mechanism for DPLL devices and pins to
improve consistency and prevent potential lifetime issues.
Introduce internal helpers __dpll_{device,pin}_{hold,put}() to
centralize reference management.
Update the internal XArray reference helpers (dpll_xa_ref_*) to
automatically grab a reference to the target object when it is added to
a list, and release it when removed. This ensures that objects linked
internally (e.g., pins referenced by parent pins) are properly kept
alive without relying on the caller to manually manage the count.
Consequently, remove the now redundant manual `refcount_inc/dec` calls
in dpll_pin_on_pin_{,un}register()`, as ownership is now correctly handled
by the dpll_xa_ref_* functions.
Additionally, ensure that dpll_device_{,un}register()` takes/releases
a reference to the device, ensuring the device object remains valid for
the duration of its registration.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-7-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add parsing for the "mux" string in the 'connection-type' pin property
mapping it to DPLL_PIN_TYPE_MUX.
Recognizing this type in the driver allows these pins to be taken as
parent pins for pin-on-pin pins coming from different modules (e.g.
network drivers).
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-6-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow drivers to register DPLL pins without manually specifying a pin
index.
Currently, drivers must provide a unique pin index when calling
dpll_pin_get(). This works well for hardware-mapped pins but creates
friction for drivers handling virtual pins or those without a strict
hardware indexing scheme.
Introduce DPLL_PIN_IDX_UNSPEC (U32_MAX). When a driver passes this
value as the pin index:
1. The core allocates a unique index using an IDA
2. The allocated index is mapped to a range starting above `INT_MAX`
This separation ensures that dynamically allocated indices never collide
with standard driver-provided hardware indices, which are assumed to be
within the `0` to `INT_MAX` range. The index is automatically freed when
the pin is released in dpll_pin_put().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-5-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the DPLL subsystem reports events (creation, deletion, changes)
to userspace via Netlink. However, there is no mechanism for other kernel
components to be notified of these events directly.
Add a raw notifier chain to the DPLL core protected by dpll_lock. This
allows other kernel subsystems or drivers to register callbacks and
receive notifications when DPLL devices or pins are created, deleted,
or modified.
Define the following:
- Registration helpers: {,un}register_dpll_notifier()
- Event types: DPLL_DEVICE_CREATED, DPLL_PIN_CREATED, etc.
- Context structures: dpll_{device,pin}_notifier_info to pass relevant
data to the listeners.
The notification chain is invoked alongside the existing Netlink event
generation to ensure in-kernel listeners are kept in sync with the
subsystem state.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Associate the registered DPLL pin with its firmware node by calling
dpll_pin_fwnode_set().
This links the created pin object to its corresponding DT/ACPI node
in the DPLL core. Consequently, this enables consumer drivers (such as
network drivers) to locate and request this specific pin using the
fwnode_dpll_pin_find() helper.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-3-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend the DPLL core to support associating a DPLL pin with a firmware
node. This association is required to allow other subsystems (such as
network drivers) to locate and request specific DPLL pins defined in
the Device Tree or ACPI.
* Add a .fwnode field to the struct dpll_pin
* Introduce dpll_pin_fwnode_set() helper to allow the provider driver
to associate a pin with a fwnode after the pin has been allocated
* Introduce fwnode_dpll_pin_find() helper to allow consumers to search
for a registered DPLL pin using its associated fwnode handle
* Ensure the fwnode reference is properly released in dpll_pin_put()
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for devlink port function state get/set operations for the
host physical function (PF). Until now, mlx5 only allowed state get/set
for subfunctions (SFs) ports. This change enables an administrator with
eSwitch manager privileges to query or modify the host PF’s function
state, allowing it to be explicitly inactivated or activated. While
inactivated, the administrator can modify the functions attributes, such
as enable/disable roce.
$ devlink port show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608: type eth netdev eth1 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr a0:88:c2:45:17:7c state active opstate attached roce enable max_io_eqs 120
$ devlink port function set pci/0000:03:00.0/196608 state inactive
$ devlink port show pci/0000:03:00.0/196608
pci/0000:03:00.0/196608: type eth netdev eth1 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr a0:88:c2:45:17:7c state inactive opstate detached roce enable max_io_eqs 120
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260203102402.1712218-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As CAN skbs don't use IP checksums the skb->csum_start variable was used to
store the can-gw CAN frame time-to-live counter together with
skb->ip_summed set to CHECKSUM_UNNECESSARY.
Remove the 'hack' using the skb->csum_start variable and move the content
to can_skb_ext::can_gw_hops of the CAN skb extensions.
The module parameter 'max_hops' has been reduced to a single byte to fit
can_skb_ext::can_gw_hops as the maximum value to be stored is 6.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-6-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch removes struct can_skb_priv which was stored at skb->head and
the can_skb_reserve() helper which was used to shift skb->head.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The can_skb_priv::frame_len variable is used to cache a previous
calculated CAN frame length to be passed to BQL queueing disciplines.
Move the can_skb_priv::frame_len content to can_skb_ext::can_framelen.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-4-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When routing CAN frames over different CAN interfaces the interface index
skb->iif is overwritten with every single hop. To prevent sending a CAN
frame back to its originating (first) incoming CAN interface another
ifindex variable is needed, which was stored in can_skb_priv::ifindex.
Move the can_skb_priv::ifindex content to can_skb_ext::can_iif.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-3-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To remove the private CAN bus skb headroom infrastructure 8 bytes need to
be stored in the skb. The skb extensions are a common pattern and an easy
and efficient way to hold private data travelling along with the skb. We
only need the skb_ext_add() and skb_ext_find() functions to allocate and
access CAN specific content as the skb helpers to copy/clone/free skbs
automatically take care of skb extensions and their final removal.
This patch introduces the complete CAN skb extensions infrastructure:
- add struct can_skb_ext in new file include/net/can.h
- add include/net/can.h in MAINTAINERS
- add SKB_EXT_CAN to skbuff.c and skbuff.h
- select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled
- check for existing CAN skb extensions in can_rcv() in af_can.c
- add CAN skb extensions allocation at every skb_alloc() location
- duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops)
- introduce can_skb_ext_add() and can_skb_ext_find() helpers
The patch also corrects an indention issue in the original code from 2018:
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recently TC maintainer Jamal intentionally a broke reasonable
use case:
https://lore.kernel.org/netdev/aG10rqwjX6elG1Gx@pop-os.localdomain/
Although I tried my best to help by:
1) Strongly objecting this breakage from the very beginning
2) Reverting it and offering a much better solution
3) Offering Jamal for video chat on 8 Jul 2025 and 26 Nov 2025
None of them worked.
So it makes no sense for me to continue caring about this subsystem.
Most importantly, intentionally breaking reasonable use cases is
against my moral, I don't want to get ashamed.
Thanks for the opportunity!
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20260130212021.46610-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PPP channels using chan->direct_xmit prepend the PPP header to a skb and
call dev_queue_xmit() directly. In this mode the skb does not need to be
linear, but the PPP netdevice currently does not advertise
scatter-gather features, causing unnecessary linearization and
preventing GSO.
Enable NETIF_F_SG and NETIF_F_FRAGLIST on PPP devices. In case a linear
buffer is required (PPP compression, multilink, and channels without
direct_xmit), call skb_linearize() explicitly.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260129012902.941-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The per-TC rate limit was restricted to 255 Gbps due to the 8-bit
max_bw_value field in the QETC register.
This limit is insufficient for newer, higher-bandwidth NICs.
Extend the rate limit by using the full 16-bit max_bw_value field.
This allows the finer 100Mbps granularity to be used for rates up to
~6.5 Tbps, instead of switching to 1Gbps granularity at higher rates.
The extended range is only used when the device advertises support
via the qetcr_qshr_max_bw_val_msb capability bit in the QCAM register.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260203073021.1710806-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5e: RX datapath enhancements
This series by Dragos introduces multiple RX datapath enhancements to
the mlx5e driver.
First patch adds SW handling for oversized packets in non-linear SKB
mode.
Second patch adds a reclaim mechanism to mitigate memory allocation
failures with memory providers.
====================
Link: https://patch.msgid.link/20260203072130.1710255-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When memory providers are used, there is a disconnect between the
page_pool size and the available memory in the provider. This means
that the page_pool can run out of memory if the user didn't provision
a large enough buffer.
Under these conditions, mlx5 gets stuck trying to allocate new
buffers without being able to release existing buffers. This happens due
to the optimization introduced in commit 4c2a132368
("net/mlx5e: RX, Defer page release in striding rq for better recycling")
which delays WQE releases to increase the chance of page_pool direct
recycling. The optimization was developed before memory providers
existed and this circumstance was not considered.
This patch unblocks the queue by reclaiming pages from WQEs that can be
freed and doing a one-shot retry. A WQE can be freed when:
1) All its strides have been consumed (WQE is no longer in linked list).
2) The WQE pages/netmems have not been previously released.
This reclaim mechanism is useful for regular pages as well.
Note that provisioning memory that can't fill even one MPWQE (64
4K pages) will still render the queue unusable. Same when
the application doesn't release its buffers for various reasons.
Or a combination of the two: a very small buffer is provisioned,
application releases buffers in bulk, bulk size never reached
=> queue is stuck.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203072130.1710255-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the driver has an inconsistent behaviour between modes when it
comes to oversized packets that are not dropped through the physical MTU
check in HW. This can happen for Multi Host configurations where each
port has a different MTU.
Current behavior:
1) Striding RQ in linear mode drops the packet in SW and counts it
with oversize_pkts_sw_drop.
2) Striding RQ in non-linear mode allows it like a normal packet.
3) Legacy RQ can't receive oversized packets by design:
the RX WQE uses MTU sized packet buffers.
This inconsistency is not a violation of the netdev policy [1]
but it is better to be consistent across modes.
This patch aligns (2) with (1) and (3). One exception is added for
LRO: don't drop the oversized packet if it is an LRO packet.
As now rq->hw_mtu always needs to be updated during the MTU change flow,
drop the reset avoidance optimization from mlx5e_change_mtu().
Extract the CQE LRO segments reading into a helper function as it
is used twice now.
[1] Documentation/networking/netdevices.rst#L205
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203072130.1710255-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dwmac databook for v3.74a states that lpi_intr_o is a sideband
signal which should be used to ungate the application clock, and this
signal is synchronous to the receive clock. The receive clock can run
at 2.5, 25 or 125MHz depending on the media speed, and can stop under
the control of the link partner. This means that the time it takes to
clear is dependent on the negotiated media speed, and thus can be 8,
40, or 400ns after reading the LPI control and status register.
It has been observed with some aggressive link partners, this clock
can stop while lpi_intr_o is still asserted, meaning that the signal
remains asserted for an indefinite period that the local system has
no direct control over.
The LPI interrupts will still be signalled through the main interrupt
path in any case, and this path is not dependent on the receive clock.
This, since we do not gate the application clock, and the chances of
adding clock gating in the future are slim due to the clocks being
ill-defined, lpi_intr_o serves no useful purpose. Remove the code which
requests the interrupt, and all associated code.
Reported-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> # Renesas RZ/V2H board
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: fix serdes power methods
The stmmac serdes powerup/powerdown methods are not guaranteed to be
called in a balancing fashion, but these are used to call the generic
PHY subsystem's phy_power_up() and phy_power_down() methods which do
require balanced calls.
This series addresses this by making the stmmac serdes methods balanced.
====================
Link: https://patch.msgid.link/aYHHWm5UkD1JVa7D@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the SerDes power up and down calls for the non-"after linkup"
case out of __stmmac_open() and __stmmac_release() into the
stmmac_open() and stmmac_release() methods, which means the SerDes
will only change power state on administrative changes or suspend/
resume, not while changing the interface MTU.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDt-00000007XxF-3uUK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The open path is missing cleanup of a successful serdes power up if
stmmac_hw_setup() or stmmac_request_irq() fails.
stmmac_resume() is also missing cleanup of the serdes power up if
stmmac_hw_setup() fails.
Add the missing cleanups.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDo-00000007Xx9-3RZ8@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid calling the serdes_powerdown() method if we have not had a
preceeding successful call to the serdes_powerup() method. This
avoids unbalancing refcounted resources that may be used in the
these platform glue serdes methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDj-00000007Xx3-2xZ0@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add wrappers for the serdes_power[up|down]() methods and update all
call sites. This will allow us to add state tracking.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnDDe-00000007Xww-2VUU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allison Henderson says:
====================
net/rds: RDS-TCP protocol and extension improvements
This is subset 3 of the larger RDS-TCP patch series I posted last
Oct. The greater series aims to correct multiple rds-tcp issues that
can cause dropped or out of sequence messages. I've broken it down into
smaller sets to make reviews more manageable.
In this set, we introduce extension headers for byte accounting
and fix several RDS/TCP protocol issues including message preservation
during connection transitions and multipath lane handling.
The entire set can be viewed in the rfc here:
https://lore.kernel.org/netdev/20251022191715.157755-1-achender@kernel.org/
====================
Link: https://patch.msgid.link/20260203055723.1085751-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Even though a peer may have already received a
non-zero value for "RDS_EXTHDR_NPATHS" from a node in the past,
the current peer may not.
Therefore it is important to initiate another rds_send_ping()
after a re-connect to any peer:
It is unknown at that time if we're still talking to the same
instance of RDS kernel modules on the other side.
Otherwise, the peer may just operate on a single lane
("c_npaths == 0"), not knowing that more lanes are available.
However, if "c_with_sport_idx" is supported,
we also need to check that the connection we accepted on lane#0
meets the proper source port modulo requirement, as we fan out:
Since the exchange of "RDS_EXTHDR_NPATHS" and "RDS_EXTHDR_SPORT_IDX"
is asynchronous, initially we have no choice but to accept an incoming
connection (via "accept") in the first slot ("cp_index == 0")
for backwards compatibility.
But that very connection may have come from a different lane
with "cp_index != 0", since the peer thought that we already understood
and handled "c_with_sport_idx" properly, as indicated by a previous
exchange before a module was reloaded.
In short:
If a module gets reloaded, we recover from that, but do *not*
allow a downgrade to support fewer lanes.
Downgrades would require us to merge messages from separate lanes,
which is rather tricky with the current RDS design.
Each lane has its own sequence number space and all messages
would need to be re-sequenced as we merge, all while
handling "RDS_FLAG_RETRANSMITTED" and "cp_retrans" properly.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-9-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of just blocking the sender until "c_npaths" is known
(it gets updated upon the receipt of a MPRDS PONG message),
simply use the first lane (cp_index#0).
But just using the first lane isn't enough.
As soon as we enqueue messages on a different lane, we'd run the risk
of out-of-order delivery of RDS messages.
Earlier messages enqueued on "cp_index == 0" could be delivered later
than more recent messages enqueued on "cp_index > 0", mostly because of
possible head of line blocking issues causing the first lane to be
slower.
To avoid that, we simply take a snapshot of "cp_next_tx_seq" at the
time we're about to fan-out to more lanes.
Then we delay the transmission of messages enqueued on other lanes
with "cp_index > 0" until cp_index#0 caught up with the delivery of
new messages (from "cp_send_queue") as well as in-flight
messages (from "cp_retrans") that haven't been acknowledged yet
by the receiver.
We also add a new counter "mprds_catchup_tx0_retries" to keep track
of how many times "rds_send_xmit" had to suspend activities,
because it was waiting for the first lane to catch up.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-8-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quick clean up to avoid checkpatch errors when adding members to
this struct (Prefer kernel type 'u64' over 'uint64_t').
No functional changes added.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When canceling the reconnect worker, care must be taken to reset the
reconnect-pending bit. If the reconnect worker has not yet been
scheduled before it is canceled, the reconnect-pending bit will stay
on forever.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-6-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In cases where the server (the node with the higher IP-address)
in an RDS/TCP connection is overwhelmed it is possible that the
socket that was just accepted is chock-full of messages, up to
the limit of what the socket receive buffer permits.
Subsequently, "rds_tcp_data_ready" won't be called anymore,
because there is no more space to receive additional messages.
Nor was it called prior to the point of calling "rds_tcp_set_callbacks",
because the "sk_data_ready" pointer didn't even point to
"rds_tcp_data_ready" yet.
We fix this by simply kick-starting the receive-worker
for all cases where the socket state is neither
"TCP_CLOSE_WAIT" nor "TCP_CLOSE".
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-5-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RDS/TCP differs from RDS/RDMA in that message acknowledgment
is done based on TCP sequence numbers:
As soon as the last byte of a message has been acknowledged by the
TCP stack of a peer, rds_tcp_write_space() goes on to discard
prior messages from the send queue.
Which is fine, for as long as the receiver never throws any messages
away.
The dequeuing of messages in RDS/TCP is done either from the
"sk_data_ready" callback pointing to rds_tcp_data_ready()
(the most common case), or from the receive worker pointing
to rds_tcp_recv_path() which is called for as long as the
connection is "RDS_CONN_UP".
However, as soon as rds_conn_path_drop() is called for whatever reason,
including "DR_USER_RESET", "cp_state" transitions to "RDS_CONN_ERROR",
and rds_tcp_restore_callbacks() ends up restoring the callbacks
and thereby disabling message receipt.
So messages already acknowledged to the sender were dropped.
Furthermore, the "->shutdown" callback was always called
with an invalid parameter ("RCV_SHUTDOWN | SEND_SHUTDOWN == 3"),
instead of the correct pre-increment value ("SHUT_RDWR == 2").
inet_shutdown() returns "-EINVAL" in such cases, rendering
this call a NOOP.
So we change rds_tcp_conn_path_shutdown() to do the proper
"->shutdown(SHUT_WR)" call in order to signal EOF to the peer
and make it transition to "TCP_CLOSE_WAIT" (RFC 793).
This should make the peer also enter rds_tcp_conn_path_shutdown()
and do the same.
This allows us to dequeue all messages already received
and acknowledged to the peer.
We do so, until we know that the receive queue no longer has data
(skb_queue_empty()) and that we couldn't have any data
in flight anymore, because the socket transitioned to
any of the states "CLOSING", "TIME_WAIT", "CLOSE_WAIT",
"LAST_ACK", or "CLOSE" (RFC 793).
However, if we do just that, we suddenly see duplicate RDS
messages being delivered to the application.
So what gives?
Turns out that with MPRDS and its multitude of backend connections,
retransmitted messages ("RDS_FLAG_RETRANSMITTED") can outrace
the dequeuing of their original counterparts.
And the duplicate check implemented in rds_recv_local() only
discards duplicates if flag "RDS_FLAG_RETRANSMITTED" is set.
Rather curious, because a duplicate is a duplicate; it shouldn't
matter which copy is looked at and delivered first.
To avoid this entire situation, we simply make the sender discard
messages from the send-queue right from within
rds_tcp_conn_path_shutdown(). Just like rds_tcp_write_space() would
have done, were it called in time or still called.
This makes sure that we no longer have messages that we know
the receiver already dequeued sitting in our send-queue,
and therefore avoid the entire "RDS_FLAG_RETRANSMITTED" fiasco.
Now we got rid of the duplicate RDS message delivery, but we
still run into cases where RDS messages are dropped.
This time it is due to the delayed setting of the socket-callbacks
in rds_tcp_accept_one() via either rds_tcp_reset_callbacks()
or rds_tcp_set_callbacks().
By the time rds_tcp_accept_one() gets there, the socket
may already have transitioned into state "TCP_CLOSE_WAIT",
but rds_tcp_state_change() was never called.
Subsequently, "->shutdown(SHUT_WR)" did not happen either.
So the peer ends up getting stuck in state "TCP_FIN_WAIT2".
We fix that by checking for states "TCP_CLOSE_WAIT", "TCP_LAST_ACK",
or "TCP_CLOSE" and drop the freshly accepted socket in that case.
This problem is observable by running "rds-stress --reset"
frequently on either of the two sides of a RDS connection,
or both while other "rds-stress" processes are exchanging data.
Those "rds-stress" processes reported out-of-sequence
errors, with the expected sequence number being smaller
than the one actually received (due to the dropped messages).
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260203055723.1085751-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
